A test with the command below gives for example this error:
arch/arm/boot/dts/rk3228-evb.dt.yaml: phy@0:
'#phy-cells' is a required property
The phy nodename is normally used by a phy-handle.
This node is however compatible with
"ethernet-phy-id1234.d400", "ethernet-phy-ieee802.3-c22"
which is just been added to 'ethernet-phy.yaml'.
So change nodename to 'ethernet-phy' for which '#phy-cells'
is not a required property
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml
After patch f864edff110d ("ASoC: qdsp6: q6routing: remove default routing")
and 9b60441692d9 ("ASoC: qdsp6: q6asm-dai: only enable dais from device tree")
asm dais and routing needs to be properly specified at device tree level.
ocelot_set_ageing_time has 2 callers:
- felix_set_ageing_time: from drivers/net/dsa/ocelot/felix.c
- ocelot_port_attr_ageing_set: from drivers/net/ethernet/mscc/ocelot.c
The issue described in the fixed commit below actually happened for the
felix_set_ageing_time code path only, since ocelot_port_attr_ageing_set
was already dividing by 1000. So to make both paths symmetrical (and to
fix addresses getting aged way too fast on Ocelot), stop dividing by
1000 at caller side altogether.
Fixes: c0d7eccbc761 ("net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of reload fail, the mlxsw_sp->ports contains a pointer to a
freed memory (either by reload_down() or reload_up() error path).
Fix this by initializing the pointer to NULL and checking it before
dereferencing in split/unsplit/type_set callpaths.
Fixes: 24cc68ad6c46 ("mlxsw: core: Add support for reload") Reported-by: Danielle Ratson <danieller@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the function devm_platform_ioremap_resource(), if get resource
failed, the return value is ERR_PTR() not NULL. Thus it must be
replaced by IS_ERR(), or else it may result in crashes if a critical
error path is encountered.
Fixes: 0ce5ebd24d25 ("mfd: ioc3: Add driver for SGI IOC3 chip") Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In function mlx4_opreq_action(), pointer "mailbox" is not released,
when mlx4_cmd_box() return and error, causing a memory leak bug.
Fix this issue by going to "out" label, mlx4_free_cmd_mailbox() can
free this pointer.
Fixes: fe6f700d6cbb ("net/mlx4_core: Respond to operation request by firmware") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In cas_init_one(), "pdev" is requested by "pci_request_regions", but it
was not released after a call of the function “pci_write_config_byte”
failed. Thus replace the jump target “err_write_cacheline” by
"err_out_free_res".
Fixes: 1f26dac32057 ("[NET]: Add Sun Cassini driver.") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We cannot free record on any transient error because it leads to
losing previos data. Check socket error to know whether record must
be freed or not.
Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bpf_exec_tx_verdict() can return negative value for copied
variable. In that case this value will be pushed back to caller
and the real error code will be lost. Fix it using signed type and
checking for positive value.
Fixes: d10523d0b3d7 ("net/tls: free the record on encryption error") Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When driver is reloading during recovery flow, it can't get new commands
till command interface is up again. Otherwise we may get to null pointer
trying to access non initialized command structures.
Add cmdif state to avoid processing commands while cmdif is not ready.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After driver creates (via FW command) an EQ for commands, the driver will
be informed on new commands completion by EQE. However, due to a race in
driver's internal command mode metadata update, some new commands will
still be miss-handled by driver as if we are in polling mode. Such commands
can get two non forced completion, leading to already freed command entry
access.
CREATE_EQ command, that maps EQ to the command queue must be posted to the
command queue while it is empty and no other command should be posted.
Add SW mechanism that once the CREATE_EQ command is about to be executed,
all other commands will return error without being sent to the FW. Allow
sending other commands only after successfully changing the driver's
internal command mode metadata.
We can safely return error to all other commands while creating the command
EQ, as all other commands might be sent from the user/application during
driver load. Application can rerun them later after driver's load was
finished.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to r8168 vendor driver DASHv3 chips like RTL8168fp/RTL8117
need a special addressing for OCP access.
Fix is compile-tested only due to missing test hardware.
Fixes: 1287723aa139 ("r8169: add support for RTL8117") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In "wireguard: queueing: preserve flow hash across packet scrubbing", we
were required to slightly increase the size of the receive replay
counter to something still fairly small, but an increase nonetheless.
It turns out that we can recoup some of the additional memory overhead
by splitting up the prior union type into two distinct types. Before, we
used the same "noise_counter" union for both sending and receiving, with
sending just using a simple atomic64_t, while receiving used the full
replay counter checker. This meant that most of the memory being
allocated for the sending counter was being wasted. Since the old
"noise_counter" type increased in size in the prior commit, now is a
good time to split up that union type into a distinct "noise_replay_
counter" for receiving and a boring atomic64_t for sending, each using
neither more nor less memory than required.
Also, since sometimes the replay counter is accessed without
necessitating additional accesses to the bitmap, we can reduce cache
misses by hoisting the always-necessary lock above the bitmap in the
struct layout. We also change a "noise_replay_counter" stack allocation
to kmalloc in a -DDEBUG selftest so that KASAN doesn't trigger a stack
frame warning.
All and all, removing a bit of abstraction in this commit makes the code
simpler and smaller, in addition to the motivating memory usage
recuperation. For example, passing around raw "noise_symmetric_key"
structs is something that really only makes sense within noise.c, in the
one place where the sending and receiving keys can safely be thought of
as the same type of object; subsequent to that, it's important that we
uniformly access these through keypair->{sending,receiving}, where their
distinct roles are always made explicit. So this patch allows us to draw
that distinction clearly as well.
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's important that we clear most header fields during encapsulation and
decapsulation, because the packet is substantially changed, and we don't
want any info leak or logic bug due to an accidental correlation. But,
for encapsulation, it's wrong to clear skb->hash, since it's used by
fq_codel and flow dissection in general. Without it, classification does
not proceed as usual. This change might make it easier to estimate the
number of innerflows by examining clustering of out of order packets,
but this shouldn't open up anything that can't already be inferred
otherwise (e.g. syn packet size inference), and fq_codel can be disabled
anyway.
Furthermore, it might be the case that the hash isn't used or queried at
all until after wireguard transmits the encrypted UDP packet, which
means skb->hash might still be zero at this point, and thus no hash
taken over the inner packet data. In order to address this situation, we
force a calculation of skb->hash before encrypting packet data.
Of course this means that fq_codel might transmit packets slightly more
out of order than usual. Toke did some testing on beefy machines with
high quantities of parallel flows and found that increasing the
reply-attack counter to 8192 takes care of the most pathological cases
pretty well.
Reported-by: Dave Taht <dave.taht@gmail.com> Reviewed-and-tested-by: Toke Høiland-Jørgensen <toke@toke.dk> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prior we read the preshared key after dropping the handshake lock, which
isn't an actual crypto issue if it races, but it's still not quite
correct. So copy that part of the state into a temporary like we do with
the rest of the handshake state variables. Then we can release the lock,
operate on the temporary, and zero it out at the end of the function. In
performance tests, the impact of this was entirely unnoticable, probably
because those bytes are coming from the same cacheline as other things
that are being copied out in the same manner.
Reported-by: Matt Dunwoodie <ncon@noconroy.net> Fixes: e7096c131e51 ("net: WireGuard secure network tunnel") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On sq closure when we free its descriptors, we should also update netdev
txq on completions which would not arrive. Otherwise if we reopen sqs
and attach them back, for example on fw fatal recovery flow, we may get
tx timeout.
In the cited commit inner_tirs argument was added to create and destroy
inner tirs, and no indication was added to mlx5e_modify_tirs_hash()
function. In order to have a consistent handling, use
inner_indir_tir[0].tirn in tirs destroy/modify function as an indication
to whether inner tirs are created.
Inner tirs are not created for representors and before this commit,
a call to mlx5e_modify_tirs_hash() was sending HW commands to
modify non-existent inner tirs.
Fixes: 46dc933cee82 ("net/mlx5e: Provide explicit directive if to create inner indirect tirs") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TLS TIS object contains the dek/key ID.
By destroying the key first, the TIS would contain an invalid
non-existing key ID.
Reverse the destroy order, this also acheives the desired assymetry
between the destroy and the create flows.
Fixes: e9c1a793210f ("tipc: add dst_cache support for udp media") Cc: Xin Long <lucien.xin@gmail.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit bdf6fa52f01b ("sctp: handle association restarts when the
socket is closed.") starts shutdown when an association is restarted,
if in SHUTDOWN-PENDING state and the socket is closed. However, the
rationale stated in that commit applies also when in SHUTDOWN-SENT
state - we don't want to move an association to ESTABLISHED state when
the socket has been closed, because that results in an association
that is unreachable from user space.
The problem scenario:
1. Client crashes and/or restarts.
2. Server (using one-to-one socket) calls close(). SHUTDOWN is lost.
3. Client reconnects using the same addresses and ports.
4. Server's association is restarted. The association and the socket
move to ESTABLISHED state, even though the server process has
closed its descriptor.
Also, after step 4 when the server process exits, some resources are
leaked in an attempt to release the underlying inet sock structure in
ESTABLISHED state:
Fix by acting the same way as in SHUTDOWN-PENDING state. That is, if
an association is restarted in SHUTDOWN-SENT state and the socket is
closed, then start shutdown and don't move the association or the
socket to ESTABLISHED state.
Fixes: bdf6fa52f01b ("sctp: handle association restarts when the socket is closed.") Signed-off-by: Jere Leppänen <jere.leppanen@nokia.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears that the side effect that starts the shutdown timer was processed
multiple times, which can happen as multiple paths can trigger it. This of
course leads to the BUG halt in add_timer getting called.
Fix seems pretty straightforward, just check before the timer is added if its
already been started. If it has mod the timer instead to min(current
expiration, new expiration)
Its been tested but not confirmed to fix the problem, as the issue has only
occured in production environments where test kernels are enjoined from being
installed. It appears to be a sane fix to me though. Also, recentely,
Jere found a reproducer posted on list to confirm that this resolves the
issues
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Vlad Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> CC: jere.leppanen@nokia.com CC: marcelo.leitner@gmail.com CC: netdev@vger.kernel.org Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Device id 0927 is the RTL8153B-based component of the 'Surface USB-C to
Ethernet and USB Adapter' and may be used as a component of other devices
in future. Tested and working with the r8152 driver.
Update the cdc_ether blacklist due to the RTL8153 'network jam on suspend'
issue which this device will cause (personally confirmed).
Signed-off-by: Marc Payne <marc.payne@mdpsys.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For nexthop groups, attributes after NHA_GROUP_TYPE are invalid, but
nh_check_attr_group starts checking at NHA_GROUP. The group type defaults
to multipath and the NHA_GROUP_TYPE is currently optional so this has
slipped through so far. Fix the attribute checking to handle support of
new group types.
Fixes: 430a049190de ("nexthop: Add support for nexthop groups") Signed-off-by: ASSOGBA Emery <assogba.emery@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tls_sw_recvmsg() and tls_decrypt_done() can be run concurrently.
// tls_sw_recvmsg()
if (atomic_read(&ctx->decrypt_pending))
crypto_wait_req(-EINPROGRESS, &ctx->async_wait);
else
reinit_completion(&ctx->async_wait.completion);
if (!pending && READ_ONCE(ctx->async_notify))
complete(&ctx->async_wait.completion);
Consider the scenario tls_decrypt_done() is about to run complete()
if (!pending && READ_ONCE(ctx->async_notify))
and tls_sw_recvmsg() reads decrypt_pending == 0, does reinit_completion(),
then tls_decrypt_done() runs complete(). This sequence of execution
results in wrong completion. Consequently, for next decrypt request,
it will not wait for completion, eventually on connection close, crypto
resources freed, there is no way to handle pending decrypt response.
This race condition can be avoided by having atomic_read() mutually
exclusive with atomic_dec_return(),complete().Intoduced spin lock to
ensure the mutual exclution.
Addressed similar problem in tx direction.
v1->v2:
- More readable commit message.
- Corrected the lock to fix new race scenario.
- Removed barrier which is not needed now.
Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a new action is installed, firstuse field of 'tcf_t' is explicitly set
to 0. Value of zero means "new action, not yet used"; as a packet hits the
action, 'firstuse' is stamped with the current jiffies value.
tcf_tm_dump() should return 0 for firstuse if action has not yet been hit.
Fixes: 48d8ee1694dd ("net sched actions: aggregate dumping of actions timeinfo") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Roman Mashak <mrv@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit adb03115f459 ("net: get rid of an signed integer overflow in ip_idents_reserve()")
used atomic_cmpxchg to replace "atomic_add_return" inside the function
"ip_idents_reserve". The reason was to avoid UBSAN warning.
However, this change has caused performance degrade and in GCC-8,
fno-strict-overflow is now mapped to -fwrapv -fwrapv-pointer
and signed integer overflow is now undefined by default at all
optimization levels[1]. Moreover, it was a bug in UBSAN vs -fwrapv
/-fno-strict-overflow, so Let's revert it safely.
[1] https://gcc.gnu.org/gcc-8/changes.html
Suggested-by: Peter Zijlstra <peterz@infradead.org> Suggested-by: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Arvind Sankar <nivedita@alum.mit.edu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Eric Dumazet <edumazet@google.com> Cc: Jiong Wang <jiongwang@huawei.com> Signed-off-by: Yuqi Jin <jinyuqi@huawei.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once the traversal of the list is completed with list_for_each_entry(),
the iterator (node) will point to an invalid object. So passing this to
qrtr_local_enqueue() which is outside of the iterator block is erroneous
eventhough the object is not used.
So fix this by passing NULL to qrtr_local_enqueue().
Fixes: bdabad3e363d ("net: Add Qualcomm IPC router") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes data remnant seen when we fail to reserve space for a
nexthop group during a larger dump.
If we fail the reservation, we goto nla_put_failure and
cancel the message.
Reproduce with the following iproute2 commands:
=====================
ip link add dummy1 type dummy
ip link add dummy2 type dummy
ip link add dummy3 type dummy
ip link add dummy4 type dummy
ip link add dummy5 type dummy
ip link add dummy6 type dummy
ip link add dummy7 type dummy
ip link add dummy8 type dummy
ip link add dummy9 type dummy
ip link add dummy10 type dummy
ip link add dummy11 type dummy
ip link add dummy12 type dummy
ip link add dummy13 type dummy
ip link add dummy14 type dummy
ip link add dummy15 type dummy
ip link add dummy16 type dummy
ip link add dummy17 type dummy
ip link add dummy18 type dummy
ip link add dummy19 type dummy
ip link add dummy20 type dummy
ip link add dummy21 type dummy
ip link add dummy22 type dummy
ip link add dummy23 type dummy
ip link add dummy24 type dummy
ip link add dummy25 type dummy
ip link add dummy26 type dummy
ip link add dummy27 type dummy
ip link add dummy28 type dummy
ip link add dummy29 type dummy
ip link add dummy30 type dummy
ip link add dummy31 type dummy
ip link add dummy32 type dummy
ip link set dummy1 up
ip link set dummy2 up
ip link set dummy3 up
ip link set dummy4 up
ip link set dummy5 up
ip link set dummy6 up
ip link set dummy7 up
ip link set dummy8 up
ip link set dummy9 up
ip link set dummy10 up
ip link set dummy11 up
ip link set dummy12 up
ip link set dummy13 up
ip link set dummy14 up
ip link set dummy15 up
ip link set dummy16 up
ip link set dummy17 up
ip link set dummy18 up
ip link set dummy19 up
ip link set dummy20 up
ip link set dummy21 up
ip link set dummy22 up
ip link set dummy23 up
ip link set dummy24 up
ip link set dummy25 up
ip link set dummy26 up
ip link set dummy27 up
ip link set dummy28 up
ip link set dummy29 up
ip link set dummy30 up
ip link set dummy31 up
ip link set dummy32 up
ip link set dummy33 up
ip link set dummy34 up
ip link set vrf-red up
ip link set vrf-blue up
ip link set dummyVRFred up
ip link set dummyVRFblue up
ip ro add 1.1.1.1/32 dev dummy1
ip ro add 1.1.1.2/32 dev dummy2
ip ro add 1.1.1.3/32 dev dummy3
ip ro add 1.1.1.4/32 dev dummy4
ip ro add 1.1.1.5/32 dev dummy5
ip ro add 1.1.1.6/32 dev dummy6
ip ro add 1.1.1.7/32 dev dummy7
ip ro add 1.1.1.8/32 dev dummy8
ip ro add 1.1.1.9/32 dev dummy9
ip ro add 1.1.1.10/32 dev dummy10
ip ro add 1.1.1.11/32 dev dummy11
ip ro add 1.1.1.12/32 dev dummy12
ip ro add 1.1.1.13/32 dev dummy13
ip ro add 1.1.1.14/32 dev dummy14
ip ro add 1.1.1.15/32 dev dummy15
ip ro add 1.1.1.16/32 dev dummy16
ip ro add 1.1.1.17/32 dev dummy17
ip ro add 1.1.1.18/32 dev dummy18
ip ro add 1.1.1.19/32 dev dummy19
ip ro add 1.1.1.20/32 dev dummy20
ip ro add 1.1.1.21/32 dev dummy21
ip ro add 1.1.1.22/32 dev dummy22
ip ro add 1.1.1.23/32 dev dummy23
ip ro add 1.1.1.24/32 dev dummy24
ip ro add 1.1.1.25/32 dev dummy25
ip ro add 1.1.1.26/32 dev dummy26
ip ro add 1.1.1.27/32 dev dummy27
ip ro add 1.1.1.28/32 dev dummy28
ip ro add 1.1.1.29/32 dev dummy29
ip ro add 1.1.1.30/32 dev dummy30
ip ro add 1.1.1.31/32 dev dummy31
ip ro add 1.1.1.32/32 dev dummy32
ip next add id 1 via 1.1.1.1 dev dummy1
ip next add id 2 via 1.1.1.2 dev dummy2
ip next add id 3 via 1.1.1.3 dev dummy3
ip next add id 4 via 1.1.1.4 dev dummy4
ip next add id 5 via 1.1.1.5 dev dummy5
ip next add id 6 via 1.1.1.6 dev dummy6
ip next add id 7 via 1.1.1.7 dev dummy7
ip next add id 8 via 1.1.1.8 dev dummy8
ip next add id 9 via 1.1.1.9 dev dummy9
ip next add id 10 via 1.1.1.10 dev dummy10
ip next add id 11 via 1.1.1.11 dev dummy11
ip next add id 12 via 1.1.1.12 dev dummy12
ip next add id 13 via 1.1.1.13 dev dummy13
ip next add id 14 via 1.1.1.14 dev dummy14
ip next add id 15 via 1.1.1.15 dev dummy15
ip next add id 16 via 1.1.1.16 dev dummy16
ip next add id 17 via 1.1.1.17 dev dummy17
ip next add id 18 via 1.1.1.18 dev dummy18
ip next add id 19 via 1.1.1.19 dev dummy19
ip next add id 20 via 1.1.1.20 dev dummy20
ip next add id 21 via 1.1.1.21 dev dummy21
ip next add id 22 via 1.1.1.22 dev dummy22
ip next add id 23 via 1.1.1.23 dev dummy23
ip next add id 24 via 1.1.1.24 dev dummy24
ip next add id 25 via 1.1.1.25 dev dummy25
ip next add id 26 via 1.1.1.26 dev dummy26
ip next add id 27 via 1.1.1.27 dev dummy27
ip next add id 28 via 1.1.1.28 dev dummy28
ip next add id 29 via 1.1.1.29 dev dummy29
ip next add id 30 via 1.1.1.30 dev dummy30
ip next add id 31 via 1.1.1.31 dev dummy31
ip next add id 32 via 1.1.1.32 dev dummy32
i=100
while [ $i -le 200 ]
do
ip next add id $i group 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/17/18/19
echo $i
((i++))
done
ip next add id 999 group 1/2/3/4/5/6
ip next ls
========================
Fixes: ab84be7e54fc ("net: Initial nexthop code") Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The second value represents the MVPP22_CLS_C2_ATTR2_RSS_EN bit, the
first value is the queue number, which comprises two fields. The high
5 bits are 24:29 and the low three are 21:23 inclusive. This comes
from:
So, the working case gives eth2 a queue id of 4.0, or 32 as per
port->first_rxq, and the non-working case a queue id of 0.1, or 1.
The allocation of queue IDs seems to be in mvpp2_port_probe():
Making the port 0 (eth0 / eth1) have port->first_rxq = 0, and port 1
(eth2) be 32. It seems the idea is that the first 32 queues belong to
port 0, the second 32 queues belong to port 1, etc.
mvpp2_rss_port_c2_enable() gets the queue number from it's parameter,
'ctx', which comes from mvpp22_rss_ctx(port, 0). This returns
port->rss_ctx[0].
mvpp22_rss_context_create() is responsible for allocating that, which
it does by looking for an unallocated priv->rss_tables[] pointer. This
table is shared amongst all ports on the CP silicon.
When we write the tables in mvpp22_rss_fill_table(), the RSS table
entry is defined by:
u32 sel = MVPP22_RSS_INDEX_TABLE(rss_ctx) |
MVPP22_RSS_INDEX_TABLE_ENTRY(i);
where rss_ctx is the context ID (queue number) and i is the index in
the table.
If we look at what is written:
- The first table to be written has "sel" values of 00000000..0000001f,
containing values 0..3. This appears to be for eth1. This is table 0,
RX queue number 0.
- The second table has "sel" values of 00000100..0000011f, and appears
to be for eth2. These contain values 0x20..0x23. This is table 1,
RX queue number 0.
- The third table has "sel" values of 00000200..0000021f, and appears
to be for eth3. These contain values 0x40..0x43. This is table 2,
RX queue number 0.
How do queue numbers translate to the RSS table? There is another
table - the RXQ2RSS table, indexed by the MVPP22_RSS_INDEX_QUEUE field
of MVPP22_RSS_INDEX and accessed through the MVPP22_RXQ2RSS_TABLE
register. Before 895586d5dc32, it was:
Before the commit, for eth2, that would've contained '32' for the
index and '1' for the table pointer - mapping queue 32 to table 1.
Remember that this is queue-high.queue-low of 4.0.
After the commit, we appear to map queue 1 to table 1. That again
looks fine on the face of it.
Section 9.3.1 of the A8040 manual seems indicate the reason that the
queue number is separated. queue-low seems to always come from the
classifier, whereas queue-high can be from the ingress physical port
number or the classifier depending on the MVPP2_CLS_SWFWD_PCTRL_REG.
We set the port bit in MVPP2_CLS_SWFWD_PCTRL_REG, meaning that queue-high
comes from the MVPP2_CLS_SWFWD_P2HQ_REG() register... and this seems to
be where our bug comes from.
val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG);
val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id);
mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val);
Setting the MVPP2_CLS_SWFWD_PCTRL_MASK bit means that the queue-high
for eth2 is _always_ 4, so only queues 32 through 39 inclusive are
available to eth2. Yet, we're trying to tell the classifier to set
queue-high, which will be ignored, to zero. Hence, the queue-high
field (MVPP22_CLS_C2_ATTR0_QHIGH()) from the classifier will be
ignored.
This means we end up directing traffic from eth2 not to queue 1, but
to queue 33, and then we tell it to look up queue 33 in the RSS table.
However, RSS table has not been programmed for queue 33, and so it ends
up (presumably) dropping the packets.
It seems that mvpp22_rss_context_create() doesn't take account of the
fact that the upper 5 bits of the queue ID can't actually be changed
due to the settings in mvpp2_cls_oversize_rxq_set(), _or_ it seems that
mvpp2_cls_oversize_rxq_set() has been missed in this commit. Either
way, these two functions mutually disagree with what queue number
should be used.
Looking deeper into what mvpp2_cls_oversize_rxq_set() and the MTU
validation is doing, it seems that MVPP2_CLS_SWFWD_P2HQ_REG() is used
for over-sized packets attempting to egress through this port. With
the classifier having had RSS enabled and directing eth2 traffic to
queue 1, we may still have packets appearing on queue 32 for this port.
However, the only way we may end up with over-sized packets attempting
to egress through eth2 - is if the A8040 forwards frames between its
ports. From what I can see, we don't support that feature, and the
kernel restricts the egress packet size to the MTU. In any case, if we
were to attempt to transmit an oversized packet, we have no support in
the kernel to deal with that appearing in the port's receive queue.
So, this patch attempts to solve the issue by clearing the
MVPP2_CLS_SWFWD_PCTRL_MASK() bit, allowing MVPP22_CLS_C2_ATTR0_QHIGH()
from the classifier to define the queue-high field of the queue number.
My testing seems to confirm my findings above - clearing this bit
means that if I enable rxhash on eth2, the interface can then pass
traffic, as we are now directing traffic to RX queue 1 rather than
queue 33. Traffic still seems to work with rxhash off as well.
Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When FW response to commands is very slow and all command entries in
use are waiting for completion we can have a race where commands can get
timeout before they get out of the queue and handled. Timeout
completion on uninitialized command will cause releasing command's
buffers before accessing it for initialization and then we will get NULL
pointer exception while trying access it. It may also cause releasing
buffers of another command since we may have timeout completion before
even allocating entry index for this command.
Add entry handling completion to avoid this race.
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error with MPLS support the code is misusing AF_INET
instead of AF_MPLS.
Fixes: 1b69e7e6c4da ("ipip: support MPLS over IPv4") Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk")
added a bind-address cache in tb->fast*. The tb->fast* caches the address
of a sk which has successfully been binded with SO_REUSEPORT ON. The idea
is to avoid the expensive conflict search in inet_csk_bind_conflict().
There is an issue with wildcard matching where sk_reuseport_match() should
have returned false but it is currently returning true. It ends up
hiding bind conflict. For example,
bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */
bind("[::2]:443"); /* with SO_REUSEPORT. Succeed. */
bind("[::]:443"); /* with SO_REUSEPORT. Still Succeed where it shouldn't */
The last bind("[::]:443") with SO_REUSEPORT on should have failed because
it should have a conflict with the very first bind("[::1]:443") which
has SO_REUSEPORT off. However, the address "[::2]" is cached in
tb->fast* in the second bind. In the last bind, the sk_reuseport_match()
returns true because the binding sk's wildcard addr "[::]" matches with
the "[::2]" cached in tb->fast*.
The correct bind conflict is reported by removing the second
bind such that tb->fast* cache is not involved and forces the
bind("[::]:443") to go through the inet_csk_bind_conflict():
bind("[::1]:443"); /* without SO_REUSEPORT. Succeed. */
bind("[::]:443"); /* with SO_REUSEPORT. -EADDRINUSE */
The expected behavior for sk_reuseport_match() is, it should only allow
the "cached" tb->fast* address to be used as a wildcard match but not
the address of the binding sk. To do that, the current
"bool match_wildcard" arg is split into
"bool match_sk1_wildcard" and "bool match_sk2_wildcard".
This change only affects the sk_reuseport_match() which is only
used by inet_csk (e.g. TCP).
The other use cases are calling inet_rcv_saddr_equal() and
this patch makes it pass the same "match_wildcard" arg twice to
the "ipv[46]_rcv_saddr_equal(..., match_wildcard, match_wildcard)".
Cc: Josef Bacik <jbacik@fb.com> Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__netif_receive_skb_core may change the skb pointer passed into it (e.g.
in rx_handler). The original skb may be freed as a result of this
operation.
The callers of __netif_receive_skb_core may further process original skb
by using pt_prev pointer returned by __netif_receive_skb_core thus
leading to unpleasant effects.
The solution is to pass skb by reference into __netif_receive_skb_core.
v2: Added Fixes tag and comment regarding ppt_prev and skb invariant.
Fixes: 88eb1944e18c ("net: core: propagate SKB lists through packet_type lookup") Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vlan_for_each() are required to be called with rtnl_lock taken, otherwise
ASSERT_RTNL() warning will be triggered - which happens now during System
resume from suspend:
cpsw_suspend()
|- cpsw_ndo_stop()
|- __hw_addr_ref_unsync_dev()
|- cpsw_purge_all_mc()
|- vlan_for_each()
|- ASSERT_RTNL();
Hence, fix it by surrounding cpsw_ndo_stop() by rtnl_lock/unlock() calls.
Fixes: 15180eca569b ("net: ethernet: ti: cpsw: fix vlan mcast") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a client moves from a DSA user port to a software port in a bridge,
it cannot reach any other clients that connected to the DSA user ports.
That is because SA learning on the CPU port is disabled, so the switch
ignores the client's frames from the CPU port and still thinks it is at
the user port.
Fix it by enabling SA learning on the CPU port.
To prevent the switch from learning from flooding frames from the CPU
port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames,
and let the switch flood them instead of trapping to the CPU port.
Multicast frames still need to be trapped to the CPU port for snooping,
so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames
to disable SA learning.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case we can't find a ->dumpit callback for the requested
(family,type) pair, we fall back to (PF_UNSPEC,type). In effect, we're
in the same situation as if userspace had requested a PF_UNSPEC
dump. For RTM_GETROUTE, that handler is rtnl_dump_all, which calls all
the registered RTM_GETROUTE handlers.
The requested table id may or may not exist for all of those
families. commit ae677bbb4441 ("net: Don't return invalid table id
error when dumping all families") fixed the problem when userspace
explicitly requests a PF_UNSPEC dump, but missed the fallback case.
For example, when we pass ipv6.disable=1 to a kernel with
CONFIG_IP_MROUTE=y and CONFIG_IP_MROUTE_MULTIPLE_TABLES=y,
the (PF_INET6, RTM_GETROUTE) handler isn't registered, so we end up in
rtnl_dump_all, and listing IPv6 routes will unexpectedly print:
# ip -6 r
Error: ipv4: MR table does not exist.
Dump terminated
commit ae677bbb4441 introduced the dump_all_families variable, which
gets set when userspace requests a PF_UNSPEC dump. However, we can't
simply set the family to PF_UNSPEC in rtnetlink_rcv_msg in the
fallback case to get dump_all_families == true, because some messages
types (for example RTM_GETRULE and RTM_GETNEIGH) only register the
PF_UNSPEC handler and use the family to filter in the kernel what is
dumped to userspace. We would then export more entries, that userspace
would have to filter. iproute does that, but other programs may not.
Instead, this patch removes dump_all_families and updates the
RTM_GETROUTE handlers to check if the family that is being dumped is
their own. When it's not, which covers both the intentional PF_UNSPEC
dumps (as dump_all_families did) and the fallback case, ignore the
missing table id error.
Fixes: cb167893f41e ("net: Plumb support for filtering ipv4 and ipv6 multicast route dumps") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The caller of devm_ioremap_resource(), either accidentally
or by wrong assumption, is writing back derived resource data
to global static resource initialization tables that should
have been constant. Meaning that after it computes the final
physical start address it saves the address for no reason
in the static tables. This doesn't affect the first driver
probing after reboot, but it breaks consecutive driver reloads
(i.e. driver unbind & bind) because the initialization tables
no longer have the correct initial values. So the next probe()
will map the device registers to wrong physical addresses,
causing ARM SError async exceptions.
This patch fixes all of the above.
Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As ethnl_request_ops::reply_size handlers do not include common header
size into calculated/estimated reply size, it needs to be added in
ethnl_default_doit() and ethnl_default_notify() before allocating the
message. On the other hand, strset_reply_size() should not add common
header size.
Fixes: 728480f12442 ("ethtool: default handlers for GET requests") Reported-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dpaa-eth driver probes on compatible string for the MAC node, and
the fman/mac.c driver allocates a dpaa-ethernet platform device that
triggers the probing of the dpaa-eth net device driver.
All of this is fine, but the problem is that the struct device of the
dpaa_eth net_device is 2 parents away from the MAC which can be
referenced via of_node. So of_find_net_device_by_node can't find it, and
DSA switches won't be able to probe on top of FMan ports.
It would be a bit silly to modify a core function
(of_find_net_device_by_node) to look for dev->parent->parent->of_node
just for one driver. We're just 1 step away from implementing full
recursion.
Actually there have already been at least 2 previous attempts to make
this work:
- Commit a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node")
- One or more of the patches in "[v3,0/6] adapt DPAA drivers for DSA":
https://patchwork.ozlabs.org/project/netdev/cover/1508178970-28945-1-git-send-email-madalin.bucur@nxp.com/
(I couldn't really figure out which one was supposed to solve the
problem and how).
Point being, it looks like this is still pretty much a problem today.
On T1040, the /sys/class/net/eth0 symlink currently points to
which pretty much illustrates the problem. The closest of_node we've got
is the "fsl,fman-memac" at /soc@ffe000000/fman@400000/ethernet@e6000,
which is what we'd like to be able to reference from DSA as host port.
For of_find_net_device_by_node to find the eth0 port, we would need the
parent of the eth0 net_device to not be the "dpaa-ethernet" platform
device, but to point 1 level higher, aka the "fsl,fman-memac" node
directly. The new sysfs path would look like this:
And this is exactly what SET_NETDEV_DEV does. It sets the parent of the
net_device. The new parent has an of_node associated with it, and
of_dev_node_match already checks for the of_node of the device or of its
parent.
Fixes: a1a50c8e4c24 ("fsl/man: Inherit parent device and of_node") Fixes: c6e26ea8c893 ("dpaa_eth: change device used") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Local variable ----devname@ax25_setsockopt created at:
ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536
ax25_setsockopt+0xe6/0x1170 net/ax25/af_ax25.c:536
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sched/fair: Fix enqueue_task_fair warning some more
The recent patch, fe61468b2cb (sched/fair: Fix enqueue_task_fair warning)
did not fully resolve the issues with the rq->tmp_alone_branch !=
&rq->leaf_cfs_rq_list warning in enqueue_task_fair. There is a case where
the first for_each_sched_entity loop exits due to on_rq, having incompletely
updated the list. In this case the second for_each_sched_entity loop can
further modify se. The later code to fix up the list management fails to do
what is needed because se does not point to the sched_entity which broke out
of the first loop. The list is not fixed up because the throttled parent was
already added back to the list by a task enqueue in a parallel child hierarchy.
Address this by calling list_add_leaf_cfs_rq if there are throttled parents
while doing the second for_each_sched_entity loop.
Fixes: fe61468b2cb ("sched/fair: Fix enqueue_task_fair warning") Suggested-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Phil Auld <pauld@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Link: https://lkml.kernel.org/r/20200512135222.GC2201@lorien.usersys.redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Even when a cgroup is throttled, the group se of a child cgroup can still
be enqueued and its gse->on_rq stays true. When a task is enqueued on such
child, we still have to update the load_avg and increase
h_nr_running of the throttled cfs. Nevertheless, the 1st
for_each_sched_entity() loop is skipped because of gse->on_rq == true and the
2nd loop because the cfs is throttled whereas we have to update both
load_avg with the old h_nr_running and increase h_nr_running in such case.
The same sequence can happen during dequeue when se moves to parent before
breaking in the 1st loop.
Note that the update of load_avg will effectively happen only once in order
to sync up to the throttled time. Next call for updating load_avg will stop
early because the clock stays unchanged.
The walk through the cgroup hierarchy during the enqueue/dequeue of a task
is split in 2 distinct parts for throttled cfs_rq without any added value
but making code less readable.
Change the code ordering such that everything related to a cfs_rq
(throttled or not) will be done in the same loop.
In addition, the same steps ordering is used when updating a cfs_rq:
As discussed in [0], it's dangerous to allow mapping BPF map, that's meant to
be frozen and is read-only on BPF program side, because that allows user-space
to actually store a writable view to the page even after it is frozen. This is
exacerbated by BPF verifier making a strong assumption that contents of such
frozen map will remain unchanged. To prevent this, disallow mapping
BPF_F_RDONLY_PROG mmap()'able BPF maps as writable, ever.
The Rx protocol has a "previousPacket" field in it that is not handled in
the same way by all protocol implementations. Sometimes it contains the
serial number of the last DATA packet received, sometimes the sequence
number of the last DATA packet received and sometimes the highest sequence
number so far received.
AF_RXRPC is using this to weed out ACKs that are out of date (it's possible
for ACK packets to get reordered on the wire), but this does not work with
OpenAFS which will just stick the sequence number of the last packet seen
into previousPacket.
The issue being seen is that big AFS FS.StoreData RPC (eg. of ~256MiB) are
timing out when partly sent. A trace was captured, with an additional
tracepoint to show ACKs being discarded in rxrpc_input_ack(). Here's an
excerpt showing the problem.
The Out-Of-Sequence ACK indicates that the server didn't see DATA sequence
number 00024499, but did see seq 0002449a (previousPacket, shown as "p=",
skipped the number, but firstPacket, "f=", which shows the bottom of the
window is set at that point).
More OOS ACKs indicate that the other packets that are already in the
transmission pipeline are being received. The specific-ACK list is up to 6
ACKs and NAKs.
And now we've received an ACK indicating that a DATA retransmission was
received. 7 packets have been processed (the occupied part of the window
moved, as indicated by f= and n=).
However, the DLY ACK gets discarded because its previousPacket has gone
backwards (from p=000244b8, in the ACK at 52873.287478 to p=00024499 in the
ACK at 52873.293850).
We then end up in a continuous cycle of retransmit/discard. kafs fails to
update its window because it's discarding the ACKs and can't transmit an
extra packet that would clear the issue because the window is full.
OpenAFS doesn't change the previousPacket value in the ACKs because no new
DATA packets are received with a different previousPacket number.
Fix this by altering the discard check to only discard an ACK based on
previousPacket if there was no advance in the firstPacket. This allows us
to transmit a new packet which will cause previousPacket to advance in the
next ACK.
The check, however, needs to allow for the possibility that previousPacket
may actually have had the serial number placed in it instead - in which
case it will go outside the window and we should ignore it.
Fixes: 1a2391c30c0b ("rxrpc: Fix detection of out of order acks") Reported-by: Dave Botsch <botsch@cnf.cornell.edu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Normally, show_trace_log_lvl() scans the stack, looking for text
addresses to print. In parallel, it unwinds the stack with
unwind_next_frame(). If the stack address matches the pointer returned
by unwind_get_return_address_ptr() for the current frame, the text
address is printed normally without a question mark. Otherwise it's
considered a breadcrumb (potentially from a previous call path) and it's
printed with a question mark to indicate that the address is unreliable
and typically can be ignored.
Since the following commit:
f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks")
... for inactive tasks, show_trace_log_lvl() prints *only* unreliable
addresses (prepended with '?').
That happens because, for the first frame of an inactive task,
unwind_get_return_address_ptr() returns the wrong return address
pointer: one word *below* the task stack pointer. show_trace_log_lvl()
starts scanning at the stack pointer itself, so it never finds the first
'reliable' address, causing only guesses to being printed.
The first frame of an inactive task isn't a normal stack frame. It's
actually just an instance of 'struct inactive_task_frame' which is left
behind by __switch_to_asm(). Now that this inactive frame is actually
exposed to callers, fix unwind_get_return_address_ptr() to interpret it
properly.
Fixes: f1d9a2abff66 ("x86/unwind/orc: Don't skip the first frame for inactive tasks") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200522135435.vbxs7umku5pyrdbk@treble Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When attaching a flow dissector program to a network namespace with
bpf(BPF_PROG_ATTACH, ...) we grab a reference to bpf_prog.
If netns gets destroyed while a flow dissector is still attached, and there
are no other references to the prog, we leak the reference and the program
remains loaded.
Leak can be reproduced by running flow dissector tests from selftests/bpf:
# bpftool prog list
# ./test_flow_dissector.sh
...
selftests: test_flow_dissector [PASS]
# bpftool prog list
4: flow_dissector name _dissect tag e314084d332a5338 gpl
loaded_at 2020-05-20T18:50:53+0200 uid 0
xlated 552B jited 355B memlock 4096B map_ids 3,4
btf_id 4
#
Fix it by detaching the flow dissector program when netns is going away.
initrd_start must not point at the location the initrd is loaded into
the crashkernel memory but at the location it will be after the
crashkernel memory is swapped with the memory at 0.
Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader") Reported-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Tested-by: Lianbo Jiang <lijiang@redhat.com> Link: https://lore.kernel.org/r/20200512193956.15ae3f23@laptop2-ibm.local Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the boot issues since 5.3 on several Dell models when the TPM
is enabled. Depending on the exact grub binary, booting the kernel would
freeze early, or just report an error parsing the final events log.
We get an event log in the SHA-1 format, which doesn't have a
tcg_efi_specid_event_head in the first event, and there is a final events
table which doesn't match the crypto agile format.
__calc_tpm2_event_size reads bad "count" and "efispecid->num_algs", and
either fails, or loops long enough for the machine to be appear frozen.
So we now only parse the final events table, which is per the spec always
supposed to be in the crypto agile format, when we got a event log in this
format.
Fixes: c46f3405692de ("tpm: Reserve the TPM final events table") Fixes: 166a2809d65b2 ("tpm: Don't duplicate events from the final event log in the TCG2 log")
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1779611 Signed-off-by: Loïc Yhuel <loic.yhuel@gmail.com> Link: https://lore.kernel.org/r/20200512040113.277768-1-loic.yhuel@gmail.com Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Matthew Garrett <mjg59@google.com>
[ardb: warn when final events table is missing or in the wrong format] Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A ticket was not released after a call of the function
"rxkad_decrypt_ticket" failed. Thus replace the jump target
"temporary_error_free_resp" by "temporary_error_free_ticket".
Fixes: 8c2f826dc3631 ("rxrpc: Don't put crypto buffers on the stack") Signed-off-by: Qiushi Wu <wu000273@umn.edu> Signed-off-by: David Howells <dhowells@redhat.com>
cc: Markus Elfring <Markus.Elfring@web.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rxrpc currently uses a fixed 4s retransmission timeout until the RTT is
sufficiently sampled. This can cause problems with some fileservers with
calls to the cache manager in the afs filesystem being dropped from the
fileserver because a packet goes missing and the retransmission timeout is
greater than the call expiry timeout.
Fix this by:
(1) Copying the RTT/RTO calculation code from Linux's TCP implementation
and altering it to fit rxrpc.
(2) Altering the various users of the RTT to make use of the new SRTT
value.
(3) Replacing the use of rxrpc_resend_timeout to use the calculated RTO
value instead (which is needed in jiffies), along with a backoff.
Notes:
(1) rxrpc provides RTT samples by matching the serial numbers on outgoing
DATA packets that have the RXRPC_REQUEST_ACK set and PING ACK packets
against the reference serial number in incoming REQUESTED ACK and
PING-RESPONSE ACK packets.
(2) Each packet that is transmitted on an rxrpc connection gets a new
per-connection serial number, even for retransmissions, so an ACK can
be cross-referenced to a specific trigger packet. This allows RTT
information to be drawn from retransmitted DATA packets also.
(3) rxrpc maintains the RTT/RTO state on the rxrpc_peer record rather than
on an rxrpc_call because many RPC calls won't live long enough to
generate more than one sample.
(4) The calculated SRTT value is in units of 8ths of a microsecond rather
than nanoseconds.
The (S)RTT and RTO values are displayed in /proc/net/rxrpc/peers.
Fixes: 17926a79320a ([AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both"") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
free_handle() for a foreign handle may race with inter-page compaction,
what can lead to memory corruption.
To avoid that, take write lock not read lock in free_handle to be
synchronized with __release_z3fold_page().
For example KASAN can detect it:
==================================================================
BUG: KASAN: use-after-free in LZ4_decompress_safe+0x2c4/0x3b8
Read of size 1 at addr ffffffc976695ca3 by task GoogleApiHandle/4121
CPU: 0 PID: 4121 Comm: GoogleApiHandle Tainted: P S OE 4.19.81-perf+ #162
Hardware name: Sony Mobile Communications. PDX-203(KONA) (DT)
Call trace:
LZ4_decompress_safe+0x2c4/0x3b8
lz4_decompress_crypto+0x3c/0x70
crypto_decompress+0x58/0x70
zcomp_decompress+0xd4/0x120
...
Apart from that, initialize zhdr->mapped_count in init_z3fold_page() and
remove "newpage" variable because it is not used anywhere.
The srmmu_nocache_init() uses __nocache_fix() macro to add an offset to
page table entry to access srmmu_nocache_pool.
But since sparc32 has only three actual page table levels, pgd, p4d and
pud are essentially the same thing and pgd_offset() and p4d_offset() are
no-ops, the __nocache_fix() should be done only at PUD level.
Remove __nocache_fix() for p4d_offset() and pud_offset() and keep it
only for PUD and lower levels.
Fixes: c2bc26f7ca1f ("sparc32: use PUD rather than PGD to get PMD in srmmu_nocache_init()") Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Anatoly Pugachev <matorola@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kbuild test robot reported the following warning:
arch/sparc/mm/srmmu.c: In function 'srmmu_nocache_init': arch/sparc/mm/srmmu.c:300:9: error: variable 'pud' set but not used [-Werror=unused-but-set-variable]
300 | pud_t *pud;
This warning is caused by misprint in the page table traversal in
srmmu_nocache_init() function which accessed a PMD entry using PGD
rather than PUD.
Since sparc32 has only 3 page table levels, the PGD and PUD are
essentially the same and usage of __nocache_fix() removed the type
checking.
Use PUD for the consistency and to silence the compiler warning.
Fixes: 7235db268a2777bc38 ("sparc32: use pgtable-nopud instead of 4level-fixup") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: David S. Miller <davem@davemloft.net> Cc: Anatoly Pugachev <matorola@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200520132005.GM1059226@linux.ibm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using the socket ioctls on arch/sh (and only there) causes build time
problems when __kernel_old_timeval/__kernel_old_timespec are not already
visible to the compiler.
Add an explict include line for the header that defines these
structures.
Fixes: 8c709f9a0693 ("y2038: sh: remove timeval/timespec usage from headers") Fixes: 0768e17073dc ("net: socket: implement 64-bit timestamps") Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200519131327.1836482-1-arnd@arndb.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During early boot, while KASAN is not yet initialized, it is possible to
enter reporting code-path and end up in kasan_report().
While uninitialized, the branch there prevents generating any reports,
however, under certain circumstances when branches are being traced
(TRACE_BRANCH_PROFILING), we may recurse deep enough to cause kernel
reboots without warning.
To prevent similar issues in future, we should disable branch tracing
for the core runtime.
In the case of get_user_pages_fast() returning fewer pages than
requested, rio_dma_transfer() does not quite do the right thing. It
attempts to release all the pages that were requested, rather than just
the pages that were pinned.
Fix the error handling so that only the pages that were successfully
pinned are released.
Fixes: e8de370188d0 ("rapidio: add mport char device driver") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Alexandre Bounine <alex.bou9@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200517235620.205225-2-jhubbard@nvidia.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Assume we try to unload kmem. This force-unloading will work, even if
memory cannot get removed from the system.
[root@localhost ~]# rmmod kmem
[ 86.380228] removing memory fails, because memory [0x0000000150000000-0x0000000157ffffff] is onlined
...
[ 86.431225] kmem dax0.0: DAX region [mem 0x150000000-0x33fffffff] cannot be hotremoved until the next reboot
Now, we can reconfigure the namespace:
[root@localhost ~]# ndctl create-namespace --force --reconfig=namespace0.0 --mode=devdax
[ 131.409351] nd_pmem namespace0.0: could not reserve region [mem 0x140000000-0x33fffffff]dax
[ 131.410147] nd_pmem: probe of namespace0.0 failed with error -16namespace0.0 --mode=devdax
...
This fails as expected due to the busy memory resource, and the memory
cannot be used. However, the dax0.0 device is removed, and along its
name.
The name of the memory resource now points at freed memory (name of the
device):
We have to make sure to duplicate the string. While at it, remove the
superfluous setting of the name and fixup a stale comment.
Fixes: 9f960da72b25 ("device-dax: "Hotremove" persistent memory that is used like normal RAM") Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.3] Link: http://lkml.kernel.org/r/20200508084217.9160-2-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With certain kernel configurations, the R_390_JMP_SLOT relocation type
might be generated, which is not expected by the KASLR relocation code,
and the kernel stops with the message "Unknown relocation type".
This was found with a zfcpdump kernel config, where CONFIG_MODULES=n
and CONFIG_VFIO=n. In that case, symbol_get() is used on undefined
__weak symbols in virt/kvm/vfio.c, which results in the generation
of R_390_JMP_SLOT relocation types.
Fix this by handling R_390_JMP_SLOT similar to R_390_GLOB_DAT.
The s390_mmio_read/write syscalls are currently broken when running with
MIO.
The new pcistb_mio/pcstg_mio/pcilg_mio instructions are executed
similiarly to normal load/store instructions and do address translation
in the current address space. That means inside the kernel they are
aware of mappings into kernel address space while outside the kernel
they use user space mappings (usually created through mmap'ing a PCI
device file).
Now when existing user space applications use the s390_pci_mmio_write
and s390_pci_mmio_read syscalls, they pass I/O addresses that are mapped
into user space so as to be usable with the new instructions without
needing a syscall. Accessing these addresses with the old instructions
as done currently leads to a kernel panic.
Also, for such a user space mapping there may not exist an equivalent
kernel space mapping which means we can't just use the new instructions
in kernel space.
Instead of replicating user mappings in the kernel which then might
collide with other mappings, we can conceptually execute the new
instructions as if executed by the user space application using the
secondary address space. This even allows us to directly store to the
user pointer without the need for copy_to/from_user().
Cc: stable@vger.kernel.org Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow me_cl object to be freed by releasing the reference
that was acquired by one of the search functions:
__mei_me_cl_by_uuid_id() or __mei_me_cl_by_uuid()
Cc: <stable@vger.kernel.org> Reported-by: 亿一 <teroincn@gmail.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200512223140.32186-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An uninitialised spin lock for sifive serial console raises a bad
magic spin_lock error as reported and discussed here [1].
Initialising the spin lock resolves the issue.
The fix is tested on HiFive Unleashed A00 board with Linux 5.7-rc4
and OpenSBI v0.7
DMA transfers to and from the SD card stall for 10 seconds and run into
timeout on RTS5260 card readers after ASPM was enabled.
Adding a short msleep after disabling ASPM fixes the issue on several
Dell Precision 7530/7540 systems I tested.
This function is only called when waking up after the chip went into
power-save after not transferring data for a few seconds. The added
msleep does therefore not change anything in data transfer speed or
induce any excessive waiting while data transfers are running, or the
chip is sleeping. Only the transition from sleep to active is affected.
Commit 21c27f06587d ("driver core: Fix SYNC_STATE_ONLY device link
implementation") didn't completely fix STATELESS + SYNC_STATE_ONLY
handling.
What looks like an optimization in that commit is actually a bug that
causes an if condition to always take the else path. This prevents
reordering of devices in the dpm_list when a DL_FLAG_STATELESS device
link is create on top of an existing DL_FLAG_SYNC_STATE_ONLY device
link.
Fixes: 21c27f06587d ("driver core: Fix SYNC_STATE_ONLY device link implementation") Signed-off-by: Saravana Kannan <saravanak@google.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200520043626.181820-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When SYNC_STATE_ONLY support was added in commit 05ef983e0d65 ("driver
core: Add device link support for SYNC_STATE_ONLY flag"),
device_link_add() incorrectly skipped adding the new SYNC_STATE_ONLY
device link to the supplier's and consumer's "device link" list.
This causes multiple issues:
- The device link is lost forever from driver core if the caller
didn't keep track of it (caller typically isn't expected to). This is
a memory leak.
- The device link is also never visible to any other code path after
device_link_add() returns.
If we fix the "device link" list handling, that exposes a bunch of
issues.
1. The device link "status" state management code rightfully doesn't
handle the case where a DL_FLAG_MANAGED device link exists between a
supplier and consumer, but the consumer manages to probe successfully
before the supplier. The addition of DL_FLAG_SYNC_STATE_ONLY links break
this assumption. This causes device_links_driver_bound() to throw a
warning when this happens.
Since DL_FLAG_SYNC_STATE_ONLY device links are mainly used for creating
proxy device links for child device dependencies and aren't useful once
the consumer device probes successfully, this patch just deletes
DL_FLAG_SYNC_STATE_ONLY device links once its consumer device probes.
This way, we avoid the warning, free up some memory and avoid
complicating the device links "status" state management code.
2. Creating a DL_FLAG_STATELESS device link between two devices that
already have a DL_FLAG_SYNC_STATE_ONLY device link will result in the
DL_FLAG_STATELESS flag not getting set correctly. This patch also fixes
this.
Lastly, this patch also fixes minor whitespace issues.
Cc: stable@vger.kernel.org Fixes: 05ef983e0d65 ("driver core: Add device link support for SYNC_STATE_ONLY flag") Signed-off-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200519063000.128819-1-saravanak@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During initial submission the selection of the channel was done using
the scan_index member of the iio_chan_spec structure. It was an abuse
because this member is supposed to be used with a buffer so it was
removed.
However there was still the need to be able to known how to select a
channel, the correct member to store this information is address.
Thanks to this it is possible to select any other channel than the
channel 0.
Fixes: 8dd2d7c0fed7 ("iio: adc: Add driver for the TI ADS8344 A/DC chips") Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMA channel request should use device struct from platform device struct.
Currently it's using iio device struct. But at this stage when probing,
device struct isn't yet registered (e.g. device_register is done in
iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create
symlinks between DMA channels and slaves"), a warning message is printed
as the links in sysfs can't be created, due to device isn't yet registered:
- Cannot create DMA slave symlink
- Cannot create DMA dma:rx symlink
Fix this by using device struct from platform device to request dma chan.
Fixes: eca949800d2d ("IIO: ADC: add stm32 DFSDM support for PDM microphone") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DMA channel request should use device struct from platform device struct.
Currently it's using iio device struct. But at this stage when probing,
device struct isn't yet registered (e.g. device_register is done in
iio_device_register). Since commit 71723a96b8b1 ("dmaengine: Create
symlinks between DMA channels and slaves"), a warning message is printed
as the links in sysfs can't be created, due to device isn't yet registered:
- Cannot create DMA slave symlink
- Cannot create DMA dma:rx symlink
Fix this by using device struct from platform device to request dma chan.
In the "gb_tty_set_termios" function the "newline" variable is declared
but not initialized. So the "flow_control" member is not initialized and
the OR / AND operations with itself results in an undefined value in
this member.
The purpose of the code is to set the flow control type, so remove the
OR / AND self operator and set the value directly.
Addresses-Coverity-ID: 1374016 ("Uninitialized scalar variable") Fixes: e55c25206d5c9 ("greybus: uart: Handle CRTSCTS flag in termios") Signed-off-by: Oscar Carter <oscar.carter@gmx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200510101426.23631-1-oscar.carter@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function. Also
removed var 'rv' since we can use 'err' instead.
Fixes: 7dc7967fc39a ("staging: kpc2000: add initial set of Daktronics drivers") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200506134735.102041-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the serial interface is used, the 8-bit address should be latched using
the rising edge of the WR/FSYNC signal.
This basically means that a CS change is required between the first byte
sent, and the second one.
This change splits the single-transfer transfer of 2 bytes into 2 transfers
with a single byte, and CS change in-between.
Note fixes tag is not accurate, but reflects a point beyond which there
are too many refactors to make backporting straight forward.
Fixes: b19e9ad5e2cb ("staging:iio:resolver:ad2s1210 general driver cleanup.") Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When CONFIG_DEBUG_INFO is enabled, the two kallsyms linking steps spend
time collecting and writing the dwarf sections to the temporary output
files. kallsyms does not need this information, and leaving it off
halves their linking time. This is especially noticeable without
CONFIG_DEBUG_INFO_REDUCED. The BTF linking stage, however, does still
need those details.
Refactor the BTF and kallsyms generation stages slightly for more
regularized temporary names. Skip debug during kallsyms links.
Additionally move "info BTF" to the correct place since commit 8959e39272d6 ("kbuild: Parameterize kallsyms generation and correct
reporting"), which added "info LD ..." to vmlinux_link calls.
For a full debug info build with BTF, my link time goes from 1m06s to
0m54s, saving about 12 seconds, or 18%.
This patch fixes a regression: patch df5db5f9ee112 allowed function
run_queue() to bypass its call to do_xmote() if revokes were queued for
the glock. That's wrong because its call to do_xmote() is what is
responsible for calling the go_sync() glops functions to sync both
the ail list and any revokes queued for it. By bypassing the call,
gfs2 could get into a stand-off where the glock could not be demoted
until its revokes are written back, but the revokes would not be
written back because do_xmote() was never called.
It "sort of" works, however, because there are other mechanisms like
the log flush daemon (logd) that can sync the ail items and revokes,
if it deems it necessary. The problem is: without file system pressure,
it might never deem it necessary.
Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Init value of some display vregs rea inherited from host pregs. When
host display in different status, i.e. all monitors unpluged, different
display configurations, etc., GVT virtual display setup don't consistent
thus may lead to guest driver consider display goes malfunctional.
The added init vreg values are based on PRMs and fixed by calcuation
from current configuration (only PIPE_A) and the virtual EDID.
Fixes: 04d348ae3f0a ("drm/i915/gvt: vGPU display virtualization") Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Colin Xu <colin.xu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200508060506.216250-1-colin.xu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I don't see what security concern is addressed by obfuscating NULL
and IS_ERR() error pointers, printed with %p/%pK. Given the number
of sites where %p is used (over 10000) and the fact that NULL pointers
aren't uncommon, it probably wouldn't take long for an attacker to
find the hash that corresponds to 0. Although harder, the same goes
for most common error values, such as -1, -2, -11, -14, etc.
The NULL part actually fixes a regression: NULL pointers weren't
obfuscated until commit 3e5903eb9cff ("vsprintf: Prevent crash when
dereferencing invalid pointers") which went into 5.2. I'm tacking
the IS_ERR() part on here because error pointers won't leak kernel
addresses and printing them as pointers shouldn't be any different
from e.g. %d with PTR_ERR_OR_ZERO(). Obfuscating them just makes
debugging based on existing pr_debug and friends excruciating.
Note that the "always print 0's for %pK when kptr_restrict == 2"
behaviour which goes way back is left as is.
When the kernel is built with lockdep support and the owl-dma driver is
used, the following message is shown:
[ 2.496939] INFO: trying to register non-static key.
[ 2.501889] the code is fine but needs lockdep annotation.
[ 2.507357] turning off the locking correctness validator.
[ 2.512834] CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.6.3+ #15
[ 2.519084] Hardware name: Generic DT based system
[ 2.523878] Workqueue: events_freezable mmc_rescan
[ 2.528681] [<801127f0>] (unwind_backtrace) from [<8010da58>] (show_stack+0x10/0x14)
[ 2.536420] [<8010da58>] (show_stack) from [<8080fbe8>] (dump_stack+0xb4/0xe0)
[ 2.543645] [<8080fbe8>] (dump_stack) from [<8017efa4>] (register_lock_class+0x6f0/0x718)
[ 2.551816] [<8017efa4>] (register_lock_class) from [<8017b7d0>] (__lock_acquire+0x78/0x25f0)
[ 2.560330] [<8017b7d0>] (__lock_acquire) from [<8017e5e4>] (lock_acquire+0xd8/0x1f4)
[ 2.568159] [<8017e5e4>] (lock_acquire) from [<80831fb0>] (_raw_spin_lock_irqsave+0x3c/0x50)
[ 2.576589] [<80831fb0>] (_raw_spin_lock_irqsave) from [<8051b5fc>] (owl_dma_issue_pending+0xbc/0x120)
[ 2.585884] [<8051b5fc>] (owl_dma_issue_pending) from [<80668cbc>] (owl_mmc_request+0x1b0/0x390)
[ 2.594655] [<80668cbc>] (owl_mmc_request) from [<80650ce0>] (mmc_start_request+0x94/0xbc)
[ 2.602906] [<80650ce0>] (mmc_start_request) from [<80650ec0>] (mmc_wait_for_req+0x64/0xd0)
[ 2.611245] [<80650ec0>] (mmc_wait_for_req) from [<8065aa10>] (mmc_app_send_scr+0x10c/0x144)
[ 2.619669] [<8065aa10>] (mmc_app_send_scr) from [<80659b3c>] (mmc_sd_setup_card+0x4c/0x318)
[ 2.628092] [<80659b3c>] (mmc_sd_setup_card) from [<80659f0c>] (mmc_sd_init_card+0x104/0x430)
[ 2.636601] [<80659f0c>] (mmc_sd_init_card) from [<8065a3e0>] (mmc_attach_sd+0xcc/0x16c)
[ 2.644678] [<8065a3e0>] (mmc_attach_sd) from [<8065301c>] (mmc_rescan+0x3ac/0x40c)
[ 2.652332] [<8065301c>] (mmc_rescan) from [<80143244>] (process_one_work+0x2d8/0x780)
[ 2.660239] [<80143244>] (process_one_work) from [<80143730>] (worker_thread+0x44/0x598)
[ 2.668323] [<80143730>] (worker_thread) from [<8014b5f8>] (kthread+0x148/0x150)
[ 2.675708] [<8014b5f8>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20)
[ 2.682912] Exception stack(0xee8fdfb0 to 0xee8fdff8)
[ 2.687954] dfa0: 00000000000000000000000000000000
[ 2.696118] dfc0: 0000000000000000000000000000000000000000000000000000000000000000
[ 2.704277] dfe0: 000000000000000000000000000000000000001300000000
The obvious fix would be to use 'spin_lock_init()' on 'pchan->lock'
before attempting to call 'spin_lock_irqsave()' in 'owl_dma_get_pchan()'.
However, according to Manivannan Sadhasivam, 'pchan->lock' was supposed
to only protect 'pchan->vchan' while 'od->lock' does a similar job in
'owl_dma_terminate_pchan()'.
Therefore, this patch substitutes 'pchan->lock' with 'od->lock' and
removes the 'lock' attribute in 'owl_dma_pchan' struct.
The current implementation may miss completions after we unmask the
interrupt. In order to make sure we process all competions, we need to:
1. Do an MMIO read from the device as a barrier to ensure that all PCI
writes for completions have arrived.
2. Check for any additional completions that we missed.
Commit b53611fb1ce9 ("dmaengine: tegra210-adma: Fix crash during probe")
has moved some code in the probe function and reordered the error handling
path accordingly.
However, a goto has been missed.
Fix it and goto the right label if 'dma_async_device_register()' fails, so
that all resources are released.
policy_update() invokes begin_current_label_crit_section(), which
returns a reference of the updated aa_label object to "label" with
increased refcount.
When policy_update() returns, "label" becomes invalid, so the refcount
should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
policy_update(). When aa_may_manage_policy() returns not NULL, the
refcnt increased by begin_current_label_crit_section() is not decreased,
causing a refcnt leak.
Fix this issue by jumping to "end_section" label when
aa_may_manage_policy() returns not NULL.
Fixes: 5ac8c355ae00 ("apparmor: allow introspecting the loaded policy pre internal transform") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
aa_change_profile() invokes aa_get_current_label(), which returns
a reference of the current task's label.
According to the comment of aa_get_current_label(), the returned
reference must be put with aa_put_label().
However, when the original object pointed by "label" becomes
unreachable because aa_change_profile() returns or a new object
is assigned to "label", reference count increased by
aa_get_current_label() is not decreased, causing a refcnt leak.
Fix this by calling aa_put_label() before aa_change_profile() return
and dropping unnecessary aa_get_current_label().
Fixes: 9fcf78cca198 ("apparmor: update domain transitions that are subsets of confinement at nnp") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the implementation of aa_audit_rule_init(), when aa_label_parse()
fails the allocated memory for rule is released using
aa_audit_rule_free(). But after this release, the return statement
tries to access the label field of the rule which results in
use-after-free. Before releasing the rule, copy errNo and return it
after release.
Fixes: 52e8c38001d8 ("apparmor: Fix memory leak of rule on error exit path") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wakeup capable GPIO IRQs routed via PDC are not being migrated when a CPU
is hotplugged. Add affinity callbacks to msmgpio IRQ chip to update the
affinity of wakeup capable IRQs.
Fixes: e35a6ae0eb3a ("pinctrl/msm: Setup GPIO chip in hierarchy") Signed-off-by: Venkata Narendra Kumar Gutta <vnkgutta@codeaurora.org>
[mkshah: updated commit text and minor code fixes] Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1588314617-4556-1-git-send-email-mkshah@codeaurora.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
