The recent change made it possible to generate vmlinux.h from BTF and
to ignore the file. But we also have a minimal vmlinux.h that will be
used by default. It should not be ignored by GIT.
Fixes: b7a2d774c9c5 ("perf build: Add ability to build with a generated vmlinux.h") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310110451.rvdUZJEY-lkp@intel.com/ Cc: oe-kbuild-all@lists.linux.dev Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When MODULE_DEVICE_TABLE(ishtp, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/platform/x86/intel/ishtp_eclite.c
is built as a module for x86.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
When MODULE_DEVICE_TABLE(tee, ) is built on a host with a different
endianness from the target architecture, it results in an incorrect
MODULE_ALIAS().
For example, see a case where drivers/char/hw_random/optee-rng.c
is built as a module for ARM little-endian.
If you build it on a little-endian host, you will get the correct
MODULE_ALIAS:
The same problem also occurs when you enable CONFIG_CPU_BIG_ENDIAN,
and build it on a little-endian host.
This issue has been unnoticed because the ARM kernel is configured for
little-endian by default, and most likely built on a little-endian host
(cross-build on x86 or native-build on ARM).
The uuid field must not be reversed because uuid_t is an array of __u8.
Fixes: 0fc1db9d1059 ("tee: add bus driver framework for TEE based devices") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On a state toggle from config off to config on and on the
state toggle from checkstop to not checkstop the queue's
internal states was set but the state machine was not
nudged. This did not care as on the first enqueue of a
request the state machine kick ran.
However, within an Secure Execution guest a queue is
only chosen by the scheduler when it has been bound.
But to bind a queue, it needs to run through the initial
states (reset, enable interrupts, ...). So this is like
a chicken-and-egg problem and the result was in fact
that a queue was unusable after a config off/on toggle.
With some slight rework of the handling of these states
now the new function _ap_queue_init_state() is called
which is the core of the ap_queue_init_state() function
but without locking handling. This has the benefit that
it can be called on all the places where a (re-)init
of the AP queue's state machine is needed.
Fixes: 2d72eaf036d2 ("s390/ap: implement SE AP bind, unbind and associate") Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The PMU name could be NULL in the case of the fake_pmu. Initialize the
name for the fake_pmu to "fake" so that all other logic can assume it
is initialized. Add a const to the type of name so that a literal can
be used to avoid additional initialization code. Propagate the cost
through related routines and remove now unnecessary "(char *)"
casts. Doing this located a bug in builtin-list for the pmu_glob that
was missing a strdup.
Signed-off-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20230825024002.801955-3-irogers@google.com Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Wei Li <liwei391@huawei.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Ming Wang <wangming01@loongson.cn> Cc: John Garry <john.g.garry@oracle.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-kernel@vger.kernel.org Cc: linux-perf-users@vger.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 85f73c377b2a ("perf mem-events: Avoid uninitialized read") Signed-off-by: Sasha Levin <sashal@kernel.org>
Raw events can be strings like 'r0xead' but the 0x is optional so they
can also be 'read'. On IcelakeX uncore_imc_free_running has an event
called 'read' which may be programmed as:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
```
However, the PE_RAW type isn't allowed on the right of a term, even
though in this case we just want to interpret it as a string. This
leads to the following error on IcelakeX:
```
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
event syntax error: '..nning/event=read/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Fix this by allowing raw types on the right of terms and treat them as
strings, just as is already done for PE_LEGACY_CACHE. Make this
consistent by just entirely removing name_or_legacy and always using
name_or_raw that covers all three cases.
Fixes: 6fd1e5191591 ("perf parse-events: Support PMUs for legacy cache events") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230928004431.1926969-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
By default perf will fail the build if the development files for
libtraceevent are not available.
To build perf without libtraceevent support, disabling several features
such as 'perf trace', one needs to add NO_LIBTRACEVENT=1 to the make
command line.
Add the missing comments about that to the tools/perf/Makefile.perf
file, just like all the other such command line toggles.
Fixes: 378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/ZR6+MhXtLnv6ow6E@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add missing clk_disable_unprepare() and clk_bulk_disable_unprepare()
in the error path in qnoc_probe(). And when qcom_icc_qos_set() fails,
it needs remove nodes and disable clks.
If pxad_alloc_desc() fails on the first dma_pool_alloc() call, then
sw_desc->nb_desc is zero.
In such a case pxad_free_desc() is called and it will BUG_ON().
Remove this erroneous BUG_ON().
It is also useless, because if "sw_desc->nb_desc == 0", then, on the first
iteration of the for loop, i is -1 and the loop will not be executed.
(both i and sw_desc->nb_desc are 'int')
If a hub is disconnected that has device(s) that's attached to the usbip layer
the disconnect function might fail because it tries to release the port
on an already disconnected hub.
Fixes: 6080cd0e9239 ("staging: usbip: claim ports used by shared devices") Signed-off-by: Jonas Blixt <jonas.blixt@actia.se> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20230615092810.1215490-1-jonas.blixt@actia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The iio_generic_buffer can return garbage values when the total size of
scan data is not a multiple of the largest element in the scan. This can be
demonstrated by reading a scan, consisting, for example of one 4-byte and
one 2-byte element, where the 4-byte element is first in the buffer.
The IIO generic buffer code does not take into account the last two
padding bytes that are needed to ensure that the 4-byte data for next
scan is correctly aligned.
Add the padding bytes required to align the next sample with the scan size.
It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.
The perf test named "kernel lock contention analysis test"
fails in powerpc system with below error:
[command]# ./perf test 81 -vv
81: kernel lock contention analysis test :
--- start ---
test child forked, pid 2140
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
[Skip] No BPF support
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
Testing perf lock contention --callstack-filter (w/ unix_stream)
[Fail] Recorded result should have a lock from unix_stream:
test child finished with -1
---- end ----
kernel lock contention analysis test: FAILED!
The test is failing because we get an address entry with 0 in
perf lock samples for powerpc, and code for lock contention
option "--callstack-filter" will not check further entries after
address 0.
Below are some of the samples from test generated perf.data file, which
have 0 address in the 2nd entry of callstack:
--------
sched-messaging 3409 [001] 7152.904029: lock:contention_begin: 0xc00000c80904ef00 (flags=SPIN) c0000000001e926c __traceiter_contention_begin+0x6c ([kernel.kallsyms])
0 [unknown] ([unknown]) c000000000f8a178 native_queued_spin_lock_slowpath+0x1f8 ([kernel.kallsyms]) c000000000f89f44 _raw_spin_lock_irqsave+0x84 ([kernel.kallsyms]) c0000000001d9fd0 prepare_to_wait+0x50 ([kernel.kallsyms]) c000000000c80f50 sock_alloc_send_pskb+0x1b0 ([kernel.kallsyms]) c000000000e82298 unix_stream_sendmsg+0x2b8 ([kernel.kallsyms]) c000000000c78980 sock_sendmsg+0x80 ([kernel.kallsyms])
Based on commit 20002ded4d93 ("perf_counter: powerpc: Add callchain support"),
incase of powerpc, the callchain saved by kernel always includes first
three entries as the NIP (next instruction pointer), LR (link register), and
the contents of LR save area in the second stack frame. In certain scenarios
its possible to have invalid kernel instruction addresses in either of LR or the
second stack frame's LR. In that case, kernel will store the address as zer0.
Hence, its possible to have 2nd or 3rd callstack entry as 0.
As per the current code in match_callstack_filter function, we skip the callstack
check incase we get 0 address. And hence the test case is failing in powerpc.
Fix this issue by updating the check in match_callstack_filter function,
to not skip callstack check if the 2nd or 3rd entry have 0 address
for powerpc.
Result in powerpc after patch changes:
[command]# ./perf test 81 -vv
81: kernel lock contention analysis test :
--- start ---
test child forked, pid 4570
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
[Skip] No BPF support
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
[Skip] Could not find 'tasklist_lock'
Testing perf lock contention --callstack-filter (w/ unix_stream)
Testing perf lock contention --callstack-filter with task aggregation
Testing perf lock contention CSV output
[Skip] No BPF support
test child finished with 0
---- end ----
kernel lock contention analysis test: Ok
Fixes: ebab291641be ("perf lock contention: Support filters for different aggregation") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Tested-by: Disha Goel <disgoel@linux.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Cc: maddy@linux.ibm.com Cc: atrajeev@linux.vnet.ibm.com Link: https://lore.kernel.org/r/20231003092113.252380-1-kjain@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Zero is not a valid IRQ for in-kernel code and the irq_of_parse_and_map()
function returns zero on error. So this check for valid IRQs should only
accept values > 0.
Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/f15cb6a7-8449-4f79-98b6-34072f04edbc@moroto.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The USB host on Tegra3 works with 32-bit alignment. Previous code tried
to align the buffer, but it did align the wrapper struct instead, so
the buffer was at a constant offset of 8 bytes (two pointers) from
expected alignment. Since kmalloc() guarantees at least 8-byte
alignment already, the alignment-extending is removed.
Tegra USB controllers seem to issue DMA in full 32-bit words only and thus
may overwrite unevenly-sized buffers. One such occurrence is detected by
SLUB when receiving a reply to a 1-byte buffer (below). Fix this by
allocating a bounce buffer also for buffers with sizes not a multiple of 4.
=============================================================================
BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten
-----------------------------------------------------------------------------
Redzone 8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Object 8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................
Redzone 8555cd40: cc cc cc cc ....
Padding 8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ
CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: usb_hub_wq hub_event
[<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14)
[<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c)
[<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4)
[<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290)
[<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8)
[<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128)
[<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac)
[<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec)
[<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c)
[<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4)
[<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174)
[<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94)
usb 1-1: device descriptor read/8, error -71
In _dwc2_hcd_urb_enqueue(), "urb->hcpriv = NULL" is executed without
holding the lock "hsotg->lock". In _dwc2_hcd_urb_dequeue():
spin_lock_irqsave(&hsotg->lock, flags);
...
if (!urb->hcpriv) {
dev_dbg(hsotg->dev, "## urb->hcpriv is NULL ##\n");
goto out;
}
rc = dwc2_hcd_urb_dequeue(hsotg, urb->hcpriv); // Use urb->hcpriv
...
out:
spin_unlock_irqrestore(&hsotg->lock, flags);
When _dwc2_hcd_urb_enqueue() and _dwc2_hcd_urb_dequeue() are
concurrently executed, the NULL check of "urb->hcpriv" can be executed
before "urb->hcpriv = NULL". After urb->hcpriv is NULL, it can be used
in the function call to dwc2_hcd_urb_dequeue(), which can cause a NULL
pointer dereference.
This possible bug is found by an experimental static analysis tool
developed by myself. This tool analyzes the locking APIs to extract
function pairs that can be concurrently executed, and then analyzes the
instructions in the paired functions to identify possible concurrency
bugs including data races and atomicity violations. The above possible
bug is reported, when my tool analyzes the source code of Linux 6.5.
To fix this possible bug, "urb->hcpriv = NULL" should be executed with
holding the lock "hsotg->lock". After using this patch, my tool never
reports the possible bug, with the kernelconfiguration allyesconfig for
x86_64. Because I have no associated hardware, I cannot test the patch
in runtime testing, and just verify it according to the code logic.
idxd sub-drivers belong to bus dsa_bus_type. Thus, dsa_bus_type must be
registered in dsa bus init before idxd drivers can be registered.
But the order is wrong when both idxd and idxd_bus are builtin drivers.
In this case, idxd driver is compiled and linked before idxd_bus driver.
Since the initcall order is determined by the link order, idxd sub-drivers
are registered in idxd initcall before dsa_bus_type is registered
in idxd_bus initcall. idxd initcall fails:
[ 21.562803] calling idxd_init_module+0x0/0x110 @ 1
[ 21.570761] Driver 'idxd' was unable to register with bus_type 'dsa' because the bus was not initialized.
[ 21.586475] initcall idxd_init_module+0x0/0x110 returned -22 after 15717 usecs
[ 21.597178] calling dsa_bus_init+0x0/0x20 @ 1
To fix the issue, compile and link idxd_bus driver before idxd driver
to ensure the right registration order.
Fixes: d9e5481fca74 ("dmaengine: dsa: move dsa_bus_type out of idxd driver to standalone") Reported-by: Michael Prinke <michael.prinke@intel.com> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Lijun Pan <lijun.pan@intel.com> Tested-by: Lijun Pan <lijun.pan@intel.com> Link: https://lore.kernel.org/r/20230924162232.1409454-1-fenghua.yu@intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The BTF func proto for a tracepoint has one more argument than the
actual tracepoint function since it has a context argument at the
begining. So it should compare to 5 when the tracepoint has 4
arguments.
Also, recent change in the perf tool would use a hand-written minimal
vmlinux.h to generate BTF in the skeleton. So it won't have the info
of the tracepoint. Anyway it should use the kernel's vmlinux BTF to
check the type in the kernel.
Fixes: b36888f71c85 ("perf record: Handle argument change in sched_switch") Reviewed-by: Ian Rogers <irogers@google.com> Acked-by: Song Liu <song@kernel.org> Cc: Hao Luo <haoluo@google.com> CC: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20230922234444.3115821-1-namhyung@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We usually do reverse order of enable() for disable(). Currently, the
ordering of irq_chip_disable_parent() is not correct in
rzg2l_gpio_irq_disable(). Fix the incorrect order.
Fuzzing found that an invalid tracepoint name would create a memory
leak with an address sanitizer build:
```
$ perf stat -e '*:o/' true
event syntax error: '*:o/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Direct leak of 4 byte(s) in 2 object(s) allocated from:
#0 0x7f38ac07077b in __interceptor_strdup ../../../../src/libsanitizer/asan/asan_interceptors.cpp:439
#1 0x55f2f41be73b in str util/parse-events.l:49
#2 0x55f2f41d08e8 in parse_events_lex util/parse-events.l:338
#3 0x55f2f41dc3b1 in parse_events_parse util/parse-events-bison.c:1464
#4 0x55f2f410b8b3 in parse_events__scanner util/parse-events.c:1822
#5 0x55f2f410d1b9 in __parse_events util/parse-events.c:2094
#6 0x55f2f410e57f in parse_events_option util/parse-events.c:2279
#7 0x55f2f4427b56 in get_value tools/lib/subcmd/parse-options.c:251
#8 0x55f2f4428d98 in parse_short_opt tools/lib/subcmd/parse-options.c:351
#9 0x55f2f4429d80 in parse_options_step tools/lib/subcmd/parse-options.c:539
#10 0x55f2f442acb9 in parse_options_subcommand tools/lib/subcmd/parse-options.c:654
#11 0x55f2f3ec99fc in cmd_stat tools/perf/builtin-stat.c:2501
#12 0x55f2f4093289 in run_builtin tools/perf/perf.c:322
#13 0x55f2f40937f5 in handle_internal_command tools/perf/perf.c:375
#14 0x55f2f4093bbd in run_argv tools/perf/perf.c:419
#15 0x55f2f409412b in main tools/perf/perf.c:535
SUMMARY: AddressSanitizer: 4 byte(s) leaked in 2 allocation(s).
```
Fix by adding the missing destructor.
Fixes: 865582c3f48e ("perf tools: Adds the tracepoint name parsing support") Signed-off-by: Ian Rogers <irogers@google.com> Cc: He Kuang <hekuang@huawei.com> Link: https://lore.kernel.org/r/20230914164028.363220-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit e571e029bdbf ("perf tools: Enable indices setting
syntax for BPF map").
The reverted commit added a notion of arrays that could be set as
event terms for BPF events. The parsing hasn't worked over multiple
Linux releases. Given the broken nature of the parsing it appears the
code isn't in use, nor could I find a way for it to be used to add a
test.
The original commit contains a test in the commit message,
however, running it yields:
```
$ perf record -e './test_bpf_map_3.c/map:channel.value[0,1,2,3...5]=101/' usleep 2
event syntax error: '..pf_map_3.c/map:channel.value[0,1,2,3...5]=101/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
```
Given the code can't be used this commit reverts and removes it.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Eduard Zingerman <eddyz87@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Herring <robh@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Wang ShaoBo <bobo.shaobowang@huawei.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20230728001212.457900-3-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: ede72dca45b1 ("perf parse-events: Fix tracepoint name memory leak") Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a pid leakage:
------------------------------
unreferenced object 0xffff88810c181940 (size 224):
comm "sshd", pid 8191, jiffies 4294946950 (age 524.570s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
ff ff ff ff 6b 6b 6b 6b ff ff ff ff ff ff ff ff ....kkkk........
backtrace:
[<ffffffff814774e6>] kmem_cache_alloc+0x5c6/0x9b0
[<ffffffff81177342>] alloc_pid+0x72/0x570
[<ffffffff81140ac4>] copy_process+0x1374/0x2470
[<ffffffff81141d77>] kernel_clone+0xb7/0x900
[<ffffffff81142645>] __se_sys_clone+0x85/0xb0
[<ffffffff8114269b>] __x64_sys_clone+0x2b/0x30
[<ffffffff83965a72>] do_syscall_64+0x32/0x80
[<ffffffff83a00085>] entry_SYSCALL_64_after_hwframe+0x61/0xc6
It turns out that there is a race condition between disassociate_ctty() and
tty_signal_session_leader(), which caused this leakage.
The pid memleak is triggered by the following race:
task[sshd] task[bash]
----------------------- -----------------------
disassociate_ctty();
spin_lock_irq(¤t->sighand->siglock);
put_pid(current->signal->tty_old_pgrp);
current->signal->tty_old_pgrp = NULL;
tty = tty_kref_get(current->signal->tty);
spin_unlock_irq(¤t->sighand->siglock);
tty_vhangup();
tty_lock(tty);
...
tty_signal_session_leader();
spin_lock_irq(&p->sighand->siglock);
...
if (tty->ctrl.pgrp) //tty->ctrl.pgrp is not NULL
p->signal->tty_old_pgrp = get_pid(tty->ctrl.pgrp); //An extra get
spin_unlock_irq(&p->sighand->siglock);
...
tty_unlock(tty);
if (tty) {
tty_lock(tty);
...
put_pid(tty->ctrl.pgrp);
tty->ctrl.pgrp = NULL; //It's too late
...
tty_unlock(tty);
}
The issue is believed to be introduced by commit c8bcd9c5be24 ("tty:
Fix ->session locking") who moves the unlock of siglock in
disassociate_ctty() above "if (tty)", making a small window allowing
tty_signal_session_leader() to kick in. It can be easily reproduced by
adding a delay before "if (tty)" and at the entrance of
tty_signal_session_leader().
To fix this issue, we move "put_pid(current->signal->tty_old_pgrp)" after
"tty->ctrl.pgrp = NULL".
In f2fs_put_super(), it tries to do sanity check on dirty and IO
reference count of f2fs, once there is any reference count leak,
it will trigger panic.
The root case is, during f2fs_put_super(), if there is any IO error
in f2fs_wait_on_all_pages(), we missed to truncate meta_inode's page
cache later, result in panic, fix this case.
Fixes: 20872584b8c0 ("f2fs: fix to drop all dirty meta/node pages during umount()") Reported-by: syzbot+ebd7072191e2eddd7d6e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/000000000000a14f020604a62a98@google.com Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
With below script, redundant compress extension will be parsed and added
by parse_options(), because parse_options() doesn't check whether the
extension is existed or not, fix it.
1. mount -t f2fs -o compress_extension=so /dev/vdb /mnt/f2fs
2. mount -t f2fs -o remount,compress_extension=so /mnt/f2fs
3. mount|grep f2fs
/dev/vdb on /mnt/f2fs type f2fs (...,compress_extension=so,compress_extension=so,...)
Fixes: 4c8ff7095bef ("f2fs: support data compression") Fixes: 151b1982be5d ("f2fs: compress: add nocompress extensions support") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In f2fs_read_multi_pages(), once f2fs_decompress_cluster() was called if
we hit cached page in compress_inode's cache, dic may be released, it needs
break the loop rather than continuing it, in order to avoid accessing
invalid dic pointer.
INFO: task sync:4788 blocked for more than 120 seconds.
Not tainted 6.5.0-rc1+ #322
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:sync state:D stack:0 pid:4788 ppid:509 flags:0x00000002
Call Trace:
<TASK>
__schedule+0x335/0xf80
schedule+0x6f/0xf0
wb_wait_for_completion+0x5e/0x90
sync_inodes_sb+0xd8/0x2a0
sync_inodes_one_sb+0x1d/0x30
iterate_supers+0x99/0xf0
ksys_sync+0x46/0xb0
__do_sys_sync+0x12/0x20
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
The reason is f2fs_all_cluster_page_ready() assumes that pages array should
cover at least one cluster, otherwise, it will always return false, result
in deadloop.
By default, pages array size is 16, and it can cover the case cluster_size
is equal or less than 16, for the case cluster_size is larger than 16, let's
allocate memory of pages array dynamically.
Fixes: 4c8ff7095bef ("f2fs: support data compression") Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1. Atoms are managed in page mode and should be released using atom_free()
instead of free().
2. When the event does not match, the atom needs to free.
Fixes: f98919ec4fccdacf ("perf kwork: Implement 'report' subcommand") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/r/20230812084917.169338-2-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The devm_clk_get_enabled() helper:
- calls devm_clk_get()
- calls clk_prepare_enable() and registers what is needed in order to
call clk_disable_unprepare() when needed, as a managed resource.
Also replace devm_regulator_get() and regulator_enable() with
devm_regulator_get_enable() helper and remove regulator_disable().
Replace iio_device_register() with devm_iio_device_register() and remove
iio_device_unregister().
And st->reg is not used anymore, so remove it.
As Jonathan pointed out, couple of things that are wrong:
1) The device is powered down 'before' we unregister it with the
subsystem and as such userspace interfaces are still exposed which
probably won't do the right thing if the chip is powered down.
2) This isn't done in the error paths in probe.
To solve this problem, register a new callback adf4350_power_down()
with devm_add_action_or_reset(), to enable software power down in both
error and device detach path. So the remove function can be removed.
Remove spi_set_drvdata() from the probe function, since spi_get_drvdata()
is not used anymore.
Fixes: e31166f0fd48 ("iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230828062717.2310219-1-ruanjinjie@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Generating metrics llc_code_read_mpi_demand_plus_prefetch,
llc_data_read_mpi_demand_plus_prefetch,
llc_miss_local_memory_bandwidth_read,
llc_miss_local_memory_bandwidth_write,
nllc_miss_remote_memory_bandwidth_read, memory_bandwidth_read,
memory_bandwidth_write, uncore_frequency, upi_data_transmit_bw,
C2_Pkg_Residency, C3_Core_Residency, C3_Pkg_Residency,
C6_Core_Residency, C6_Pkg_Residency, C7_Core_Residency,
C7_Pkg_Residency, UNCORE_FREQ and tma_info_system_socket_clks would
trigger an address sanitizer heap-buffer-overflows on a SkylakeX.
```
==2567752==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x5020003ed098 at pc 0x5621a816654e bp 0x7fffb55d4da0 sp 0x7fffb55d4d98
READ of size 4 at 0x5020003eee78 thread T0
#0 0x558265d6654d in aggr_cpu_id__is_empty tools/perf/util/cpumap.c:694:12
#1 0x558265c914da in perf_stat__get_aggr tools/perf/builtin-stat.c:1490:6
#2 0x558265c914da in perf_stat__get_global_cached tools/perf/builtin-stat.c:1530:9
#3 0x558265e53290 in should_skip_zero_counter tools/perf/util/stat-display.c:947:31
#4 0x558265e53290 in print_counter_aggrdata tools/perf/util/stat-display.c:985:18
#5 0x558265e51931 in print_counter tools/perf/util/stat-display.c:1110:3
#6 0x558265e51931 in evlist__print_counters tools/perf/util/stat-display.c:1571:5
#7 0x558265c8ec87 in print_counters tools/perf/builtin-stat.c:981:2
#8 0x558265c8cc71 in cmd_stat tools/perf/builtin-stat.c:2837:3
#9 0x558265bb9bd4 in run_builtin tools/perf/perf.c:323:11
#10 0x558265bb98eb in handle_internal_command tools/perf/perf.c:377:8
#11 0x558265bb9389 in run_argv tools/perf/perf.c:421:2
#12 0x558265bb9389 in main tools/perf/perf.c:537:3
```
The issue was the use of testing a cpumap with NULL rather than using
empty, as a map containing the dummy value isn't NULL and the -1
results in an empty aggr map being allocated which legitimately
overflows when any member is accessed.
Fixes: 8a96f454f5668572 ("perf stat: Avoid SEGV if core.cpus isn't set") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20230906003912.3317462-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
profile->disconnected was storing an invalid reference to the
disconnected path. Fix it by duplicating the string using
aa_unpack_strdup and freeing accordingly.
Fixes: 72c8a768641d ("apparmor: allow profiles to provide info to disconnected paths") Signed-off-by: Georgia Garcia <georgia.garcia@canonical.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MOD_TEXT is only defined if CONFIG_MODULES=y which lead to loading failure
of the gdb scripts when kernel is built without CONFIG_MODULES=y:
Reading symbols from vmlinux...
Traceback (most recent call last):
File "/foo/vmlinux-gdb.py", line 25, in <module>
import linux.constants
File "/foo/scripts/gdb/linux/constants.py", line 14, in <module>
LX_MOD_TEXT = gdb.parse_and_eval("MOD_TEXT")
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
gdb.error: No symbol "MOD_TEXT" in current context.
Add a conditional check on CONFIG_MODULES to fix this error.
Link: https://lkml.kernel.org/r/20231031134848.119391-1-da.gomez@samsung.com Fixes: b4aff7513df3 ("scripts/gdb: use mem instead of core_layout to get the module address") Signed-off-by: Clément Léger <cleger@rivosinc.com> Tested-by: Daniel Gomez <da.gomez@samsung.com> Signed-off-by: Daniel Gomez <da.gomez@samsung.com> Cc: Jan Kiszka <jan.kiszka@siemens.com> Cc: Kieran Bingham <kbingham@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Pankaj Raghav <p.raghav@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In order to teach the compiler that 'trig->name' will never be truncated,
we need to tell it that 'cpu' is not negative.
When building with W=1, this fixes the following warnings:
drivers/leds/trigger/ledtrig-cpu.c: In function ‘ledtrig_cpu_init’:
drivers/leds/trigger/ledtrig-cpu.c:155:56: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 5 [-Werror=format-truncation=]
155 | snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
| ^~
drivers/leds/trigger/ledtrig-cpu.c:155:52: note: directive argument in the range [-2147483648, 7]
155 | snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
| ^~~~~~~
drivers/leds/trigger/ledtrig-cpu.c:155:17: note: ‘snprintf’ output between 5 and 15 bytes into a destination of size 8
155 | snprintf(trig->name, MAX_NAME_LEN, "cpu%d", cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Disabling a PWM (i.e. calling pwm_apply_state with .enabled = false)
gives no guarantees what the PWM output does. It might freeze where it
currently is, or go in a High-Z state or drive the active or inactive
state, it might even continue to toggle.
To ensure that the LED gets really disabled, don't disable the PWM even
when .duty_cycle is zero.
This fixes disabling a leds-pwm LED on i.MX28. The PWM on this SoC is
one of those that freezes its output on disable, so if you disable an
LED that is full on, it stays on. If you disable a LED with half
brightness it goes off in 50% of the cases and full on in the other 50%.
The leds-turris-omnia driver uses three function for I2C access:
- i2c_smbus_write_byte_data() and i2c_smbus_read_byte_data(), which
cause an emulated SMBUS transfer,
- i2c_master_send(), which causes an ordinary I2C transfer.
The Turris Omnia MCU LED controller is not semantically SMBUS, it
operates as a simple I2C bus. It does not implement any of the SMBUS
specific features, like PEC, or procedure calls, or anything. Moreover
the I2C controller driver also does not implement SMBUS, and so the
emulated SMBUS procedure from drivers/i2c/i2c-core-smbus.c is used for
the SMBUS calls, which gives an unnecessary overhead.
When I first wrote the driver, I was unaware of these facts, and I
simply used the first function that worked.
Drop the I2C SMBUS calls and instead use simple I2C transfers.
Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs") Signed-off-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20230918161104.20860-2-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not lock driver mutex in the global LED panel brightness sysfs
accessors brightness_show() and brightness_store().
The mutex locking is unnecessary here. The I2C transfers are guarded by
I2C core locking mechanism, and the LED commands itself do not interfere
with other commands.
Fixes: 089381b27abe ("leds: initial support for Turris Omnia LEDs") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230802160748.11208-2-kabel@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
Stable-dep-of: 6de283b96b31 ("leds: turris-omnia: Do not use SMBUS calls") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 9e86b2ad4c11 changed the channel used for HPDET detection
(headphones vs lineout detection) from being hardcoded to
ARIZONA_ACCDET_MODE_HPL (HP left channel) to it being configurable
through arizona_pdata.hpdet_channel the DT/OF parsing added for
filling arizona_pdata on devicetree platforms ensures that
arizona_pdata.hpdet_channel gets set to ARIZONA_ACCDET_MODE_HPL
when not specified in the devicetree-node.
But on ACPI platforms where arizona_pdata is filled by
arizona_spi_acpi_probe() arizona_pdata.hpdet_channel was not
getting set, causing it to default to 0 aka ARIZONA_ACCDET_MODE_MIC.
This causes headphones to get misdetected as line-out on some models.
Fix this by setting hpdet_channel = ARIZONA_ACCDET_MODE_HPL.
Fixes: e933836744a2 ("mfd: arizona: Add support for ACPI enumeration of WM5102 connected over SPI") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231014205414.59415-1-hdegoede@redhat.com Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The MT6366 PMIC is mostly, but not fully, compatible with MT6358. It has
a different set of regulators. Specifically, it lacks the camera related
VCAM* LDOs and VLDO28, but has additional VM18, VMDDR, and VSRAM_CORE LDOs.
The PMICs contain a chip ID register that can be used to detect which
exact model is preset, so it is possible to share a common base
compatible string.
Add a separate compatible for the MT6366 PMIC, with a fallback to the
MT6358 PMIC.
Fixes: 49be16305587 ("dt-bindings: mfd: Add compatible for the MediaTek MT6366 PMIC") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230928085537.3246669-2-wenst@chromium.org Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The loop searching for a matching device based on its compatible
string is aborted when a matching disabled device is found.
This abort prevents to add devices as soon as one disabled device
is found.
Continue searching for an other device instead of aborting on the
first disabled one fixes the issue.
Fixes: 22380b65dc70 ("mfd: mfd-core: Ensure disabled devices are ignored without error") Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/r/528425d6472176bb1d02d79596b51f8c28a551cc.1692376361.git.christophe.leroy@csgroup.eu Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the unlikely event that workqueue allocation fails and returns NULL in
mlx5_mkey_cache_init(), delete the call to
mlx5r_umr_resource_cleanup() (which frees the QP) in
mlx5_ib_stage_post_ib_reg_umr_init(). This will avoid attempted double
free of the same QP when __mlx5_ib_add() does its cleanup.
Resolves a splat:
Syzkaller reported a UAF in ib_destroy_qp_user
workqueue: Failed to create a rescuer kthread for wq "mkey_cache": -EINTR
infiniband mlx5_0: mlx5_mkey_cache_init:981:(pid 1642):
failed to create work queue
infiniband mlx5_0: mlx5_ib_stage_post_ib_reg_umr_init:4075:(pid 1642):
mr cache init failed -12
==================================================================
BUG: KASAN: slab-use-after-free in ib_destroy_qp_user (drivers/infiniband/core/verbs.c:2073)
Read of size 8 at addr ffff88810da310a8 by task repro_upstream/1642
Fixes: 04876c12c19e ("RDMA/mlx5: Move init and cleanup of UMR to umr.c") Link: https://lore.kernel.org/r/1698170518-4006-1-git-send-email-george.kennedy@oracle.com Suggested-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As Linus pointed out [1], lockref_put_return() is fundamentally
designed to be something that can fail. It behaves as a fastpath-only
thing, and the failure case needs to be handled anyway.
Actually, since the new pcluster was just allocated without being
populated, it won't be accessed by others until it is inserted into
XArray, so lockref helpers are actually unneeded here.
Let's just set the proper reference count on initializing.
If a request has the flag CRYPTO_TFM_REQ_MAY_BACKLOG set, the function
qat_alg_send_message_maybacklog(), enqueues it in a backlog list if
either (1) there is already at least one request in the backlog list, or
(2) the HW ring is nearly full or (3) the enqueue to the HW ring fails.
If an interrupt occurs right before the lock in qat_alg_backlog_req() is
taken and the backlog queue is being emptied, then there is no request
in the HW queues that can trigger a subsequent interrupt that can clear
the backlog queue. In addition subsequent requests are enqueued to the
backlog list and not sent to the hardware.
Fix it by holding the lock while taking the decision if the request
needs to be included in the backlog queue or not. This synchronizes the
flow with the interrupt handler that drains the backlog queue.
For performance reasons, the logic has been changed to try to enqueue
first without holding the lock.
In a high-load arm64 environment, the pcrypt_aead01 test in LTP can lead
to system UAF (Use-After-Free) issues. Due to the lengthy analysis of
the pcrypt_aead01 function call, I'll describe the problem scenario
using a simplified model:
Suppose there's a user of padata named `user_function` that adheres to
the padata requirement of calling `padata_free_shell` after `serial()`
has been invoked, as demonstrated in the following code:
while (!list_empty(&local_list)) {
...
padata->serial(padata);
cnt++;
}
local_bh_enable();
if (refcount_sub_and_test(cnt, &pd->refcnt))
padata_free_pd(pd);
}
```
Because of the high system load and the accumulation of unexecuted
softirq at this moment, `local_bh_enable()` in padata takes longer
to execute than usual. Subsequently, when accessing `pd->refcnt`,
`pd` has already been released by `padata_free_shell()`, resulting
in a UAF issue with `pd->refcnt`.
The fix is straightforward: add `refcount_dec_and_test` before calling
`padata_free_pd` in `padata_free_shell`.
Fixes: 07928d9bfc81 ("padata: Remove broken queue flushing") Signed-off-by: WangJinchao <wangjinchao@xfusion.com> Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com> Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling get_wireless_feature_index() from probe() causes
the wireless_feature_index to only get set for unifying devices which
are already connected at probe() time. It does not get set for devices
which connect later.
Fix this by moving get_wireless_feature_index() to hidpp_connect_event(),
this does not make a difference for devices connected at probe() since
probe() will queue the hidpp_connect_event() for those at probe time.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 0da0a63b7cba ("HID: logitech-hidpp: Support WirelessDeviceStatus connect events") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231010102029.111003-4-hdegoede@redhat.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 91cf9a98ae41 ("HID: logitech-hidpp: make .probe usbhid capable")
makes hidpp_probe() first call hid_hw_start(hdev, 0) to allow IO
without connecting any hid subdrivers (hid-input, hidraw).
This is done to allow to retrieve the device's name and serial number
and store these in hdev->name and hdev->uniq.
Then later on IO was stopped and started again with hid_hw_start(hdev,
HID_CONNECT_DEFAULT) connecting hid-input and hidraw after the name
and serial number have been setup.
Commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
if not necessary") changed the probe() code to only do the start with
a 0 connect-mask + restart later for unifying devices.
But for non unifying devices hdev->name and hdev->uniq are updated too.
So this change re-introduces the problem for which the start with
a 0 connect-mask + restart later behavior was introduced.
The previous patch in this series changes the unifying path to instead of
restarting IO only call hid_connect() later. This avoids possible issues
with restarting IO seen on non unifying devices.
Revert the change to limit the restart behavior to unifying devices to
fix hdev->name changing after userspace facing devices have already been
registered.
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231010102029.111003-3-hdegoede@redhat.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
1. Some devices do not like IO being restarted this was addressed in
commit 498ba2069035 ("HID: logitech-hidpp: Don't restart communication
if not necessary"), but that change has issues of its own and needs to
be reverted.
2. Restarting IO and specifically calling hid_device_io_stop() causes
received packets to be missed, which may cause connect-events to
get missed.
Restarting IO was introduced in commit 91cf9a98ae41 ("HID: logitech-hidpp:
make .probe usbhid capable") to allow to retrieve the device's name and
serial number and store these in hdev->name and hdev->uniq before
connecting any hid subdrivers (hid-input, hidraw) exporting this info
to userspace.
But this does not require restarting IO, this merely requires deferring
calling hid_connect(). Calling hid_hw_start() with a connect-mask of
0 makes it skip calling hid_connect(), so hidpp_probe() can simply call
hid_connect() later without needing to restart IO.
Remove the stop + restart of IO and instead just call hid_connect() later
to avoid the issues caused by restarting IO.
Now that IO is no longer stopped, hid_hw_close() must be called at the end
of probe() to balance the hid_hw_open() done at the beginning probe().
This series has been tested on the following devices:
Logitech Bluetooth Laser Travel Mouse (bluetooth, HID++ 1.0)
Logitech M720 Triathlon (bluetooth, HID++ 4.5)
Logitech M720 Triathlon (unifying, HID++ 4.5)
Logitech K400 Pro (unifying, HID++ 4.1)
Logitech K270 (eQUAD nano Lite, HID++ 2.0)
Logitech M185 (eQUAD nano Lite, HID++ 4.5)
Logitech LX501 keyboard (27 Mhz, HID++ builtin scroll-wheel, HID++ 1.0)
Logitech M-RAZ105 mouse (27 Mhz, HID++ extra mouse buttons, HID++ 1.0)
And by bentiss:
Logitech Touchpad T650 (unifying)
Logitech Touchpad T651 (bluetooth)
Logitech MX Master 3B (BLE)
Logitech G403 (plain USB / Gaming receiver)
Fixes: 498ba2069035 ("HID: logitech-hidpp: Don't restart communication if not necessary") Suggested-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231010102029.111003-2-hdegoede@redhat.com Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The SuperH BIOS earlyprintk code is protected by CONFIG_EARLY_PRINTK.
However, when this protection was added, it was missed that SuperH no
longer defines an EARLY_PRINTK config symbol since commit e76fe57447e88916 ("sh: Remove old early serial console code V2"), so
BIOS earlyprintk can no longer be used.
Fix this by reviving the EARLY_PRINTK config symbol.
Fixes: d0380e6c3c0f6edb ("early_printk: consolidate random copies of identical code") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/c40972dfec3dcc6719808d5df388857360262878.1697708489.git.geert+renesas@glider.be Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch
kernel and then the below work->entry not empty bug occurs.
In hid_test_uclogic_exec_event_hook_test(), the filter->work is not
initialized to be added to p.event_hooks->list, and then the
schedule_work() in uclogic_exec_event_hook() will call __queue_work(),
which check whether the work->entry is empty and cause the below
warning call trace.
So call INIT_WORK() with a fake work to solve the issue. After applying
this patch, the below work->entry not empty bug never occurs.
When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and
then the below user-memory-access bug occurs.
In hid_test_uclogic_params_cleanup_event_hooks(),it call
uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so
when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata()
will access hdev->dev with hdev=NULL, which will cause below
user-memory-access.
So add a fake_device with quirks member and call hid_set_drvdata()
to assign hdev->dev->driver_data which avoids the null-ptr-def bug
for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying
this patch, the below user-memory-access bug never occurs.
Previously cp2112_gpio_irq_shutdown() always cancelled the
gpio_poll_worker, even if other IRQs were still active, and did not set
the gpio_poll flag to false. This resulted in any call to _shutdown()
resulting in interrupts no longer functioning on the chip until a
_remove() occurred (a.e. the cp2112 is unplugged or system rebooted).
Only cancel polling if all IRQs are disabled/masked, and correctly set
the gpio_poll flag, allowing polling to restart when an interrupt is
next enabled.
Increase name array to be large enough to overcome the following
compilation error.
drivers/infiniband/hw/hfi1/efivar.c: In function ‘read_hfi1_efi_var’:
drivers/infiniband/hw/hfi1/efivar.c:124:44: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
124 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^
drivers/infiniband/hw/hfi1/efivar.c:124:9: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
124 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/hfi1/efivar.c:133:52: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
133 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^
drivers/infiniband/hw/hfi1/efivar.c:133:17: note: ‘snprintf’ output 2 or more bytes (assuming 65) into a destination of size 64
133 | snprintf(name, sizeof(name), "%s-%s", prefix_name, kind);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:243: drivers/infiniband/hw/hfi1/efivar.o] Error 1
utf16s_to_utf8s does not NULL terminate the output string. For us to be
able to add a NULL character when utf16s_to_utf8s returns, we need to make
sure that there is space for such NULL character at the end of the output
buffer. We can achieve this by passing an output buffer size to
utf16s_to_utf8s that is one character less than what we allocated.
Other call sites of utf16s_to_utf8s appear to be using the same technique
where they artificially reduce the buffer size by one to leave space for a
NULL character or line feed character.
Fixes: 4b828fe156a6 ("scsi: ufs: revamp string descriptor reading") Reviewed-by: Mars Cheng <marscheng@google.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Yen-lin Lai <yenlinlai@google.com> Signed-off-by: Daniel Mentz <danielmentz@google.com> Link: https://lore.kernel.org/r/20231017182026.2141163-1-danielmentz@google.com Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by calling
pm_runtime_disable when error returns.
In an effort to not call sof_ops_free twice, we stopped running it when
probe was aborted.
Check the result of cancel_work_sync to see if this was the case.
Fixes: 31bb7bd9ffee ("ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful") Cc: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lore.kernel.org/r/20231009115437.99976-2-maarten.lankhorst@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to hardware limitations, only DCQCN is supported for UD. Therefore, the
default algorithm for UD is set to DCQCN.
Fixes: f91696f2f053 ("RDMA/hns: Support congestion control type selection according to the FW") Signed-off-by: Luoyouming <luoyouming@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20231017125239.164455-6-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ib_mtu_enum_to_int() and uverbs_attr_get_len() may returns a negative
value. In this case, mixed comparisons of signed and unsigned types will
throw wrong results.
This patch adds judgement for this situation.
Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC") Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20231017125239.164455-4-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current driver will print all asynchronous events. Some of the
print levels are set improperly, e.g. SRQ limit reach and SRQ last
wqe reach, which may also occur during normal operation of the software.
Currently, the information of these event is printed as a warning,
which causes a large amount of printing even during normal use of the
application. As a result, the service performance deteriorates.
This patch fixes the printing storms by modifying the print level.
Fixes: b00a92c8f2ca ("RDMA/hns: Move all prints out of irq handle") Signed-off-by: Chengchang Tang <tangchengchang@huawei.com> Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com> Link: https://lore.kernel.org/r/20231017125239.164455-2-huangjunxian6@hisilicon.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In case of an final DLM message we can't should not send an ack out
after the final message. This patch moves the ack message before the
messages will be transmitted. If it's the final message and the
receiving node turns into DLM_CLOSED state another ack messages will
being received and turning the receiving node into DLM_ESTABLISHED
again.
Fixes: 1696c75f1864 ("fs: dlm: add send ack threshold and append acks to msgs") Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 00e7e698bff1 ("backlight: pwm_bl: Configure pwm only once
per backlight toggle") calling pwm_backlight_power_off() doesn't disable
the PWM any more. However this is necessary to suspend because PWM
drivers usually refuse to suspend if they are still enabled.
Also adapt shutdown and remove callbacks to disable the PWM for similar
reasons.
Fixes: 00e7e698bff1 ("backlight: pwm_bl: Configure pwm only once per backlight toggle") Reported-by: Aisheng Dong <aisheng.dong@nxp.com> Tested-by: Aisheng Dong <aisheng.dong@nxp.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20231009093223.227286-1-u.kleine-koenig@pengutronix.de Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes the warnings of "Function parameter or member 'xxx'
not described".
>> sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'component' not described in 'psc_dma_trigger'
sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'substream' not described in 'psc_dma_trigger'
sound/soc/fsl/mpc5200_dma.c:116: warning: Function parameter or member 'cmd' not described in 'psc_dma_trigger'
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310061914.jJuekdHs-lkp@intel.com/ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Fixes: 6d1048bc1152 ("ASoC: fsl: mpc5200_dma: remove snd_pcm_ops") Link: https://lore.kernel.org/r/87il7fcqm8.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
I checked with the original author, the mmap_FIXED test case wasn't
properly tested and fails. Currently, it maps two consecutive (non
overlapping) pages and expects the second mapping to be denied by MDWE but
these two pages have nothing to do with each other so MDWE is actually out
of the picture here.
What the test actually intended to do was to remap a virtual address using
MAP_FIXED. However, this operation unmaps the existing mapping and
creates a new one so the va is backed by a new page and MDWE is again out
of the picture, all remappings should succeed.
This patch keeps the test case to make it clear that this situation is
expected to work: MDWE shouldn't block a MAP_FIXED replacement.
Link: https://lkml.kernel.org/r/20230828150858.393570-3-revest@chromium.org Fixes: 4cf1fe34fd18 ("kselftest: vm: add tests for memory-deny-write-execute") Signed-off-by: Florent Revest <revest@chromium.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Ayush Jain <ayush.jain3@amd.com> Cc: Alexey Izbyshev <izbyshev@ispras.ru> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Greg Thelen <gthelen@google.com> Cc: Joey Gouly <joey.gouly@arm.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Xu <peterx@redhat.com> Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com> Cc: Topi Miettinen <toiwoton@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
