ipq806x: utilize nvmem-cells for pre-calibration data
converts extraction entries from 11-ath10k-caldata into
nvmem-cells in the individual board's device-tree file.
The patch also moves previously existing referenced
nvmem-cells data nodes which were placed at the end
back into the partitions node. As well as removing
some duplicated properties from qcom-ipq8065-xr500.dts's
art (the included nighthawk.dtsi defines those already).
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
the WNDR4700 can fetch its calibration data and
mac-addresses directly from the "wifi_data" partition.
This allows us to get rid of the 10-ath9k-eeprom file
for the apm821xx target completely.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
kernel: usb: remove left-over LINUX_5_10 dependency symbol
this should have been removed together with linux 5.4 APM821XX
support. Currently, this didn't hurt or broke something. But it
will in the next stable kernel release.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Felix Fietkau [Fri, 4 Feb 2022 11:48:45 +0000 (12:48 +0100)]
bpf-headers: fix build error from within the SDK
The SDK does not ship the generic platform files. Use relative path for
GENERIC_PLATFORM_DIR to make it work. This points it at the files from
the feed directory instead of the base SDK path
Rosen Penev [Mon, 31 Jan 2022 02:57:59 +0000 (18:57 -0800)]
tools/meson: update to 0.61.1
Changelog:
backend_startup_project
Add a man page backend to refman
extract_objects() supports generated sources
Python 3.6 support will be dropped in the next release
Warning if check kwarg of run_command is missing
meson rewrite can modify extra_files
meson rewrite target <target> info outputs target's extra_files
Visual Studio 2022 backend
Support for CMake <3.14 is now deprecated for CMake subprojects
Added support for sccache
install_symlink function
Sven Eckelmann [Mon, 31 Jan 2022 13:39:52 +0000 (14:39 +0100)]
ramips: Switch Teltonika RUT5xx to kernel GPIO-line watchdog driver
The commit 04e91631e050 ("om-watchdog: add support for Teltonika RUT5xx
(ramips)") used the deprecated om-watchdog daemon to handle the GPIO-line
connected watchdog on the Teltonika RUT5xx.
But this daemon has massive problems since commit 30f61a34b4cf
("base-files: always use staged sysupgrade"). The process will always be
stopped on sysupgrades. If the sysupgrade takes slightly longer, the
watchdog is not triggered at the correct time and thus the sysupgrade will
interrupted hard by the watchdog sysupgrade. And this hard interrupt can
easily brick the device when there is no fallback (dual-boot, ...).
Signed-off-by: Sven Eckelmann <sven@narfation.org>
according to iptables-nft man page,
"These tools use the libxtables framework extensions and hook to the nf_tables
kernel subsystem using the nft_compat module."
This means that to work, iptables-nft needs the same modules as
iptables legacy except the ip(6)table-{filter,mangle,nat,raw}
ip_tables, ip6tables.
When those modules are loaded iptables-nft-save output contains
"# Warning: iptables-legacy tables present, use iptables-legacy-save to see them"
But as long as it's empty it should not be a problem.
To have nft properly display the rules created by ip(6)tables-nft we need
all iptables targets and matches to be built as extension and not built-in
(/usr/lib/iptables/libip(6)t_*.so)
When switching a package to iptables-nft, you need to keep the
iptables-mod-* dependencies
This patch does minimal changes:
- remove the direct iptables-nft -> iptables dependency
- and more important add nft-compat dependency
The rule
iptables-nft -A OUTPUT -d 8.8.8.8 -m comment --comment "aaa" -j REJECT
becomes
table ip filter {
chain OUTPUT {
type filter hook output priority filter; policy accept;
ip daddr 8.8.8.8 # xt_comment counter packets 0 bytes 0 # xt_REJECT
}
}
This adds support for the MikroTik RouterBOARD RBcAPGi-5acD2nD
(cAP ac), a indoor dual band, dual-radio 802.11ac wireless AP, two
10/100/1000 Mbps Ethernet ports.
See https://mikrotik.com/product/cap_ac for more info.
CFLAG -DWOLFSSL_ALT_CERT_CHAINS replaced to --enable-altcertchains
configure option
The size of the ipk changed on aarch64 like this:
491341 libwolfssl4.8.1.31258522_4.8.1-stable-7_aarch64_cortex-a53.ipk
520322 libwolfssl5.1.1.31258522_5.1.1-stable-1_aarch64_cortex-a53.ipk
Tested-by: Alozxy <alozxy@users.noreply.github.com> Acked-by: Eneas U de Queiroz <cotequeiroz@gmail.com> Signed-off-by: Sergey V. Lobanov <sergey@lobanov.in>
Marek Behún [Thu, 20 Jan 2022 13:21:36 +0000 (14:21 +0100)]
kernel: add kmod-vrf
Add option to compile kmod-vrf, support for Virtual Routing and
Forwarding (Lite).
This module depends on NET_L3_MASTER_DEV, which is a boolean kernel
option, so we need to create a configuration option also for this, and
make kmod-vrf depend on it.
Hauke Mehrtens [Sat, 29 Jan 2022 11:01:19 +0000 (12:01 +0100)]
util-linux: Update to version 2.37.3
This release fixes two security mount(8) and umount(8) issues:
CVE-2021-3996
Improper UID check in libmount allows an unprivileged user to unmount FUSE
filesystems of users with similar UID.
CVE-2021-3995
This issue is related to parsing the /proc/self/mountinfo file allows an
unprivileged user to unmount other user's filesystems that are either
world-writable themselves or mounted in a world-writable directory.
Hauke Mehrtens [Sat, 29 Jan 2022 16:35:19 +0000 (17:35 +0100)]
util-linux: Do not build raw any more.
The man page of the raw tool does not build because the disk-utils/raw.8
file is missing. It looks like it should be in the tar.xz file we
download, but it is missing.
We do not package the raw tool, so this is not a problem.
This fixes the following build error:
No rule to make target 'disk-utils/raw.8', needed by 'all-am'. Stop.
Hauke Mehrtens [Sat, 29 Jan 2022 10:57:25 +0000 (11:57 +0100)]
ethtool: Update to version 5.16
795f420 cmis: Rename CMIS parsing functions 369b43a cmis: Initialize CMIS memory map da16288 cmis: Use memory map during parsing 6acaeb9 cmis: Consolidate code between IOCTL and netlink paths d7d15f7 sff-8636: Rename SFF-8636 parsing functions 4230597 sff-8636: Initialize SFF-8636 memory map b74c040 sff-8636: Use memory map during parsing 799572f sff-8636: Consolidate code between IOCTL and netlink paths 9fdf45c sff-8079: Split SFF-8079 parsing function 2ccda25 netlink: eeprom: Export a function to request an EEPROM page 86792db cmis: Request specific pages for parsing in netlink path 6e2b32a sff-8636: Request specific pages for parsing in netlink path c2170d4 sff-8079: Request specific pages for parsing in netlink path 9538f38 netlink: eeprom: Defer page requests to individual parsers 664586e Merge branch 'review/next/module-mem-map' into master 50fdaec ethtool: Set mask correctly for dumping advertised FEC modes c5e7133 cable-test: Fix premature process termination 73091cd sff-8636: Use an SFF-8636 specific define for maximum number of channels 837c166 sff-common: Move OFFSET_TO_U16_PTR() to common header file 8658852 cmis: Initialize Page 02h in memory map 27b42a9 cmis: Initialize Banked Page 11h in memory map 340d88e cmis: Parse and print diagnostic information eae6a99 cmis: Print Module State and Fault Cause 82012f2 cmis: Print Module-Level Controls d7b1007 sff-8636: Print Power set and Power override bits 429f2fc Merge branch 'review/cmis-diag' into master 32457a9 monitor: do not show duplicate options in help text c01963e Release version 5.16.
The sizes of the ipk changed on MIPS 24Kc like this:
34317 ethtool_5.15-1_mips_24kc.ipk
34311 ethtool_5.16-1_mips_24kc.ipk
Hauke Mehrtens [Sat, 29 Jan 2022 10:56:27 +0000 (11:56 +0100)]
mbedtls: Update to version 2.16.12
This fixes the following security problems:
* Zeroize several intermediate variables used to calculate the expected
value when verifying a MAC or AEAD tag. This hardens the library in
case the value leaks through a memory disclosure vulnerability. For
example, a memory disclosure vulnerability could have allowed a
man-in-the-middle to inject fake ciphertext into a DTLS connection.
* Fix a double-free that happened after mbedtls_ssl_set_session() or
mbedtls_ssl_get_session() failed with MBEDTLS_ERR_SSL_ALLOC_FAILED
(out of memory). After that, calling mbedtls_ssl_session_free()
and mbedtls_ssl_free() would cause an internal session buffer to
be free()'d twice. CVE-2021-44732
The sizes of the ipk changed on MIPS 24Kc like this:
182454 libmbedtls12_2.16.11-2_mips_24kc.ipk
182742 libmbedtls12_2.16.12-1_mips_24kc.ipk
Hauke Mehrtens [Sat, 29 Jan 2022 10:54:49 +0000 (11:54 +0100)]
gdb: Update gdb to version 11.2
This is a minor corrective release over GDB 11.1, fixing the following issues:
* PR sim/28302 (gdb fails to build with glibc 2.34)
* PR build/28318 (std::thread support configure check does not use CXX_DIALECT)
* PR gdb/28405 (arm-none-eabi: internal-error: ptid_t remote_target::select_thread_for_ambiguous_stop_reply(const target_waitstatus*): Assertion `first_resumed_thread != nullptr' failed)
* PR tui/28483 ([gdb/tui] breakpoint creation not displayed)
* PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6)
* PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF)
* PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section)
* PR gdb/28785 (Support SHT_RELR (.relr.dyn) section)
The sizes of the ipk changed on mips 24Kc like this: 2285775 gdb_11.1-3_mips_24kc.ipk 2287441 gdb_11.2-4_mips_24kc.ipk
191828 gdbserver_11.1-3_mips_24kc.ipk
191811 gdbserver_11.2-4_mips_24kc.ipk
Hauke Mehrtens [Sat, 29 Jan 2022 10:55:03 +0000 (11:55 +0100)]
toolchain: gdb: Update to version 11.2
This is a minor corrective release over GDB 11.1, fixing the following issues:
* PR sim/28302 (gdb fails to build with glibc 2.34)
* PR build/28318 (std::thread support configure check does not use CXX_DIALECT)
* PR gdb/28405 (arm-none-eabi: internal-error: ptid_t remote_target::select_thread_for_ambiguous_stop_reply(const target_waitstatus*): Assertion `first_resumed_thread != nullptr' failed)
* PR tui/28483 ([gdb/tui] breakpoint creation not displayed)
* PR build/28555 (uclibc compile failure since commit 4655f8509fd44e6efabefa373650d9982ff37fd6)
* PR rust/28637 (Rust characters will be encoded using DW_ATE_UTF)
* PR gdb/28758 (GDB 11 doesn't work correctly on binaries with a SHT_RELR (.relr.dyn) section)
* PR gdb/28785 (Support SHT_RELR (.relr.dyn) section)
Stijn Tintel [Tue, 1 Feb 2022 19:35:06 +0000 (21:35 +0200)]
Revert "ramips: add support for ipTIME AX2004M"
Commit f4a79148f8cb ("ramips: add support for ipTIME AX2004M") seems to
leak KERNEL_LOADADDR 0x82000000 to other devices, causing the to no
longer boot. The leak is visible in u-boot:
Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description: MIPS OpenWrt Linux-5.10.92
Type: Kernel Image
Compression: lzma compressed
Data Start: 0x840000e4
Data Size: 10750165 Bytes = 10.3 MiB
Architecture: MIPS
OS: Linux
Load Address: 0x82000000
Entry Point: 0x82000000
Normally, it should look like this:
Using 'config-1' configuration
Trying 'kernel-1' kernel subimage
Description: MIPS OpenWrt Linux-5.10.92
Type: Kernel Image
Compression: lzma compressed
Data Start: 0xbfca00e4
Data Size: 2652547 Bytes = 2.5 MiB
Architecture: MIPS
OS: Linux
Load Address: 0x80001000
Entry Point: 0x80001000
Revert the commit to avoid more people soft-bricking their devices.
Commit d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to
generic implementation") renamed "mtd-mac-address-increment" property
to "mac-address-increment". Convert remaining usages that have been
added after that.
Fixes: af8a059bb41d ("ath79: add support for GL.iNet GL-XE300") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Commit d284e6ef0f06 ("treewide: convert mtd-mac-address-increment* to
generic implementation") renamed "mtd-mac-address-increment" property
to "mac-address-increment". Convert remaining usages that have been
added after that.
Fixes: f44e933458b1 ("ipq806x: provide WiFI mac-addresses from dts") Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Mon, 31 Jan 2022 17:10:01 +0000 (02:10 +0900)]
linux-firmware: intel: add firmware for AX210
Add the most recent supported firmware file for Intel Wi-Fi 6E AX210
wireless chip. The API version 67 is not yet supported by the driver.
Additional PNVM file is required since API version 62.
Daniel Golle [Mon, 31 Jan 2022 15:00:13 +0000 (15:00 +0000)]
ubox: fix broken deferred start of logfile writer
Just use 'start' action which will have the desired effect instead of
trying to introduce a 'start_file' action which didn't work that way
because procd jshn magic would have to wrap around it.
Fixes: 88baf6ce2c ("ubox: only start log to file when filesystem has been mounted") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 31 Jan 2022 00:07:32 +0000 (00:07 +0000)]
procd: seccomp/jail: Fix build error on arm with glibc
From: Peter Lundkvist <peter.lundkvist@gmail.com>
This fixes the make_syscall_h.sh script to recognize both
__NR_Linux, used by mips, and __NR_SYSCALL_BASE and
__ARM_NR_BASE used by arm.
Run-tested on arm (ipq806x) and mips (ath79), both with glibc.
Compile-tested and checked resulting syscall_names.h file wuth
glibc: aarch64, powerpc, x86_64, i486
musl: arm, mips
Fixes: FS#4194, FS#4195 Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 30 Jan 2022 22:46:44 +0000 (22:46 +0000)]
mediatek: u7623-02: enable early console also in legacy image
Append 'earlycon=uart8250,mmio32,0x11004000' to the boot arguments
embedded in device-tree in order to enable early console on the
UniElec U7623 board when using the vendor/stock bootloader.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hans Dedecker [Sun, 30 Jan 2022 21:19:34 +0000 (22:19 +0100)]
glibc: update to 2.34 HEAD
72123e1b56 NEWS: Add a bug entry for BZ #28755 08beb3a3f4 x86: Fix __wcsncmp_evex in strcmp-evex.S [BZ# 28755] b50d5b746c x86: Fix __wcsncmp_avx2 in strcmp-avx2.S [BZ# 28755] 1b9cd6a721 NEWS: add bug entry for BZ #28769 and BZ #28770 3438bbca90 Linux: Detect user namespace support in io/tst-getcwd-smallbuff d084965adc realpath: Avoid overwriting preexisting error (CVE-2021-3998) 472e799a5f getcwd: Set errno to ERANGE for size == 1 (CVE-2021-3999) 8c8a71c85f tst-realpath-toolong: Fix hurd build f7a79879c0 realpath: Set errno to ENAMETOOLONG for result larger than PATH_MAX [BZ #28770] 73c362840c stdlib: Fix formatting of tests list in Makefile 269eb9d930 stdlib: Sort tests in Makefile 062ff490c1 support: Add helpers to create paths longer than PATH_MAX 82b1acd9de powerpc: Fix unrecognized instruction errors with recent binutils 1d401d1fcc x86: use default cache size if it cannot be determined [BZ #28784] 6890b8a3ae CVE-2022-23218: Buffer overflow in sunrpc svcunix_create (bug 28768) 1081f1d3dd sunrpc: Test case for clnt_create "unix" buffer overflow (bug 22542) 7b5d433fd0 CVE-2022-23219: Buffer overflow in sunrpc clnt_create for "unix" (bug 22542) 5575daae50 socket: Add the __sockaddr_un_set function 03e6e02e6a Disable debuginfod in printer tests [BZ #28757] 705f1e4606 Update syscall lists for Linux 5.16 2fe2af88ab i386: Remove broken CAN_USE_REGISTER_ASM_EBP (bug 28771) 73558ffe84 Update syscall lists for Linux 5.15 e64235ff42 powerpc: Fix unrecognized instruction errors with recent GCC
Daniel Golle [Sun, 30 Jan 2022 19:39:21 +0000 (19:39 +0000)]
ubox: only start log to file when filesystem has been mounted
If log_file is on an filesystem mounted using /etc/config/fstab we have
to wait for that to happen before starting the logread process.
Inhibit the start of the file-writer process and use a mount trigger to
fire it up once the filesystem actually becomes available.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Sun, 30 Jan 2022 19:37:41 +0000 (19:37 +0000)]
procd: support generic mount triggers and clean up
Allow init scripts to trigger free-form actions by exposing
procd_add_action_mount_trigger.
Clean up mount trigger wrappers while at it to reduce code duplication.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
The Wavlink WL-WN535K1 is a "mesh" router with 2 gigabit ethernet ports
and one fast ethernet port. Mine is branded as Talius TAL-WMESH1.
It can be found in kits of 2 or 3 (WL-WN535K2 or WL-WN535K3).
The motherboard is labelled as WS-WN535G3-B-V1.2 so this image could
potentially work for WL-WN535G3R and WS-WN535G3R with little to none
effort, but it's untested.
Hardware
--------
SoC: Mediatek MT7620A
RAM: 64MB
FLASH: 8MB NOR (GigaDevice GD25Q64CS)
ETH:
- 2x 10/100/1000 Mbps Ethernet (RTL8211F)
- 1x 10/100 Mbps Ethernet (integrated in SOC)
WIFI:
- 2.4GHz: 1x (integrated in SOC) (2x2:2)
- 5GHz: 1x MT7612E (2x2:2)
- 4 internal antennas
BTN:
- 1x Reset button
- 1x Touchlink button (set to WPS)
- 1x ON/OFF switch
LEDS:
- 1x Red led (system status)
- 1x Blue led (system status)
- 3x Green leds (ethernet port status/act)
UART:
- 57600-8-N-1
Everything works correctly.
Currently there is no firmware update available. Because of this, in
order to restore the OEM firmware, you must firstly dump the OEM
firmware from your router before you flash the OpenWrt image.
Backup the OEM Firmware
-----------------------
The following steps are to be intended for users having little to none
experience in linux. Obviously there are many ways to backup the OEM
firmware, but probably this is the easiest way for this router.
Procedure tested on WN535K1_V1510_200916 firmware version.
1) Go to http://192.168.10.1/webcmd.shtml
2) Type the following line in the "Command" input box and then press enter:
mkdir /etc_ro/lighttpd/www/dev; dd if=/dev/mtd0ro of=/etc_ro/lighttpd/www/dev/mtd0ro
3) After few seconds in the textarea should appear this output:
16384+0 records in
16384+0 records out
If your output doesn't match mine, stop reading and ask for
help in the forum.
4) Open in another tab http://192.168.10.1/dev/mtd0ro to download the
content of the whole NOR. If the file size is 0 byte, stop reading
and ask for help in the forum.
5) Come back to the http://192.168.10.1/webcmd.shtml webpage and type:
rm /etc_ro/lighttpd/www/dev/mtd0ro;for i in 1 2 3 4 5; do dd if=/dev/mtd${i}ro of=/etc_ro/lighttpd/www/dev/mtd${i}ro; done
6) After few seconds, in the textarea should appear this output:
384+0 records in
384+0 records out
128+0 records in
128+0 records out
128+0 records in
128+0 records out
14720+0 records in
14720+0 records out
1024+0 records in
1024+0 records out
If your output doesn't match mine, stop reading and ask for
help in the forum.
7) Open the following links to download the partitions of the OEM FW:
http://192.168.10.1/dev/mtd1ro
http://192.168.10.1/dev/mtd2ro
http://192.168.10.1/dev/mtd3ro
http://192.168.10.1/dev/mtd4ro
http://192.168.10.1/dev/mtd5ro
If one (or more) of these files are 0 byte, stop reading and ask
for help in the forum.
8) Store these downloaded files in a safe place.
9) Reboot your router to remove any temporary file in ram.
Installation
------------
Flash the initramfs image in the OEM firmware interface
(http://192.168.10.1/update_mesh.shtml).
When Openwrt boots, flash the sysupgrade image otherwise you won't be
able to keep configuration between reboots.
Restore OEM Firmware
--------------------
Flash the "mtd4ro" file you previously backed-up directly from LUCI.
Warning: Remember to not keep settings!
Warning2: Remember to force the flash.
Notes
-----
1) Router mac addresses:
LAN XX:XX:XX:XX:XX:E2 (factory @ 0x28)
WAN XX:XX:XX:XX:XX:E3 (factory @ 0x2e)
WIFI 2G XX:XX:XX:XX:XX:E4 (factory @ 0x04)
WIFI 5G XX:XX:XX:XX:XX:E5 (factory @ 0x8004)
LABEL XX:XX:XX:XX:XX:E5
2) The OEM firmware upgrade page accepts only files containing the
string "WN535K1" in the filename.
Paul Spooren [Thu, 27 Jan 2022 09:25:19 +0000 (10:25 +0100)]
CI: add formal checks
The formal checks verify the following things:
- Commits does not contain any merge commits
- Signed by a real name
- Commit titles starts with an `<area>:`
- Author name matches signed of name
- Commit message is not empty
Installation via **recovery** mode:
1. Press reset button, power up the device, wait >10s for CPU LED
to stop blinking.
2. Upload recovery image through the recovery web page at 192.168.0.1.
Revert to stock firmware:
1. Install stock image via recovery mode.
Installation via web interface:
1. Flash **initramfs** image through the stock web interface.
2. Boot into OpenWrt and perform sysupgrade with sysupgrade image.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Notes:
* There are several variants of the model name: "NAS-I", "NASI", "NAS1".
Here "NAS1" is adopted for consistent naming scheme.
* The reset button is also a USB copy button in stock FW,
but in this patch the former is the only default behavior.
Installation via web interface:
1. Flash sysupgrade image through the stock web interface.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Sungbo Eo [Tue, 4 Jan 2022 15:36:13 +0000 (00:36 +0900)]
kernel: move bootargs-append patch to generic
This moves bootargs-append support patch from ipq40xx and ipq806x to
generic. This way we can append additional boot arguments from DTS instead
of only being able to overwrite them.
This is a preparation for kirkwood support of ipTIME NAS1.
Hauke Mehrtens [Sun, 23 Jan 2022 00:48:28 +0000 (01:48 +0100)]
kernel: Fix compile warning
This fixes the following compile warning:
CC init/do_mounts.o
init/do_mounts.c:478:19: warning: 'mount_ubi_rootfs' defined but not used [-Wunused-function]
478 | static int __init mount_ubi_rootfs(void)
| ^~~~~~~~~~~~~~~~
Chuanhong Guo [Fri, 28 Jan 2022 11:46:51 +0000 (19:46 +0800)]
kernel: 5.10: drop broken-flash-reset patch
Flash accessing instruction templates are determined during probe since
v5.6 for spimem-dirmap support in spi-nor driver in upstream commit: df5c21002cf4 ("mtd: spi-nor: use spi-mem dirmap API")
As a result, changing bus_width on the fly doesn't work anymore and this
patch will cause executing spi-mem ops with 3-byte address on 16-32M
flash area.
We can't easily revert that behavioral change upstream so drop the patch
to prevent u-boot and eeprom from being erased.
Fixes: b10d604459("kernel: add linux 5.10 support") Reported-by: Frank Di Matteo <dimatto@foxmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
perf: Depend on libbfd and libopcodes when enabled
bpftool will enabled libbfd and libopcodes which gets picked up by perf
as libraries to link against. Add those missing dependencies when either
of these packages are enabled.
Felix Fietkau [Thu, 27 Jan 2022 12:25:39 +0000 (13:25 +0100)]
tools: build bash on macOS and use it for ipkg-build
On macOS, system binaries silently drop the environment variables for injecting
extra shared libraries (used by fakeroot). This is done for security reasons.
Work around this by building bash from source, so that it gets an ad-hoc signature
and does not have these restrictions
Tiago Gaspar [Sun, 23 Jan 2022 00:44:01 +0000 (00:44 +0000)]
netfilter: correct some dependencies
nf-nathelper-extra and nf-conntrack-netlink had iptables related
dependencies, yet, when looking for the respective kernel symbols and
checking it's dependencies it was confirmed that iptables wasn't
required and that these were either it's own moodule or tool independent
(nftables or iptables).
Correct these and make sure no unneeded extras are pulled in.
David Bauer [Tue, 25 Jan 2022 20:46:54 +0000 (21:46 +0100)]
rockchip: disable UHS modes for NanoPi R4S
The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting
while U-Boot requires the card to be in 3.3V mode.
Remove UHS support from the SD controller so the card remains in 3.3V
mode. This reduces transfer speeds but ensures a reboot whether from
userspace or following a kernel panic is always working.
Daniel Golle [Tue, 25 Jan 2022 00:05:43 +0000 (00:05 +0000)]
mediatek: mt7623: include regular AHCI PCI driver
The legacy image for the UniElec U7623-02 until now included
kmod-ata-ahci-mtk. The MT7623 chip doesn't have that IP and that
board uses a PCIe-connected AHCI controller for the SATA port and
mSATA-pins of the mPCIe socket. Hence include kmod-ata-ahci instead.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Mon, 24 Jan 2022 10:22:31 +0000 (11:22 +0100)]
build: change PYTHON to python3
On recent macOS, /usr/bin/python3 is a wrapper that finds the right python executable
It checks argv[0] to determine if python2 or python3 should be called. Always execute
it as python3 to ensure it calls the right version
projects / thirdparty / openwrt.git / log
