It is possible to configure a TCP/TLS client without having a TCP/TLS
server. In that case, no error or warning was printed but the headers
Contact and Via in SIP REGISTER were "(null)".
Kevin Harwell [Wed, 8 Apr 2020 19:33:47 +0000 (14:33 -0500)]
chan_pjsip: digit_begin - constant DTMF tone if RTP is not setup yet
If chan_pjsip is configured for DTMF_RFC_4733, and the core triggers a
digit begin before media, or rtp has been setup then it's possible the
outgoing channel will hear a constant DTMF tone upon answering.
This happens because when there is no media, or rtp chan_pjsip notifies
the core to initiate inband DTMF. However, upon digit end if media, and
rtp become available then chan_pjsip does not notify the core to stop
inband DTMF. Thus the tone continues playing.
This patch makes it so chan_pjsip only notifies the core to start
inband DTMF in only the required cases. Now if there is no media, or
rtp availabe upon digit begin chan_pjsip does nothing, but tells the
core it handled it.
Joshua C. Colp [Thu, 26 Mar 2020 22:42:27 +0000 (19:42 -0300)]
res_pjsip: Don't set endpoint to unavailable in all cases.
When an AOR is modified endpoints are updated that reference
the AOR so they can start receiving updates and reflect the
correct state. If this is the case then we shouldn't change
the endpoint to be offline if it does not reference the AOR
but instead only when the endpoint is completely updated for
all its AORs.
ASTERISK-28056
patches:
pjsip_options-aor.diff submitted by jhord (license 6978)
Kevin Harwell [Tue, 31 Mar 2020 17:52:44 +0000 (12:52 -0500)]
channel: write to a stream on multi-frame writes
If a frame handling routine returns a list of frames (vs. a single frame)
those frames are never passed to a tech's write_stream handler even if one is
available. For instance, if a codec translation occurred and that codec
returned multiple frames then those particular frames were always only sent
to the tech's "write" handler. If that tech (pjsip for example) was stream
capable then those frames were essentially ignored. Thus resulting in bad
audio.
This patch makes it so the "write_stream" handler is appropriately called
for all cases, and for all frames if available.
sungtae kim [Thu, 26 Mar 2020 22:18:17 +0000 (22:18 +0000)]
dial.c: Removed dial string 80 character limitation
The dial application had 80 characters of destination length
limitation. But this limitation causes unexpected dial string
cut if the dial string is long.
Removed unnecessary limited buffer to support longer dial
destination.
Jaco Kroon [Wed, 18 Mar 2020 13:49:56 +0000 (15:49 +0200)]
acl: implement a centralized ACL output mechanism for HAs and ACLs.
named_acl.c (which is really a named_ha) now uses ast_ha_output.
I've also updated main/manager.c to output the actual ACL on "manager
show user <username>" if one is set. If this works then we can add
similar to other modules as required.
When an outgoing channel is created a list of formats may
optionally be provided which is used as a request that the
formats be used if possible. If an endpoint is not configured
for any of the formats we ignore this request and use what is
configured. This has the side effect of also including other
stream types (such as video) that were not present in the
requested formats.
This change makes it so that the intention of the request is
preserved - that is if only an audio format is requested then
even if there is no joint audio format between the request and
the configuration we will still only place an audio stream in
the outgoing call.
Jaco Kroon [Fri, 20 Mar 2020 14:12:05 +0000 (16:12 +0200)]
netsock2: compile fixes.
This fixes ast_addressfamily_to_sockaddrsize to reference the
provided argument, and ast_sockaddr_from_sockaddr to not use the name of
a structure as argument.
Kevin Harwell [Tue, 17 Mar 2020 20:54:25 +0000 (15:54 -0500)]
ast_coredumper: add Asterisk information dump
This patch makes it so ast_coredumper now outputs the following information to
a *-info.txt file when processing a core file:
asterisk version and "built by" string
BUILD_OPTS
system start, and last reloaded date/time
taskprocessor list
equivalent of "bridge show all"
equivalent of "core show channels verbose"
Also a slight modification was made when trying to obtain the pid(s) of a
running Asterisk. If it fails to retrieve any it now reports an error.
Jaco Kroon [Wed, 18 Mar 2020 09:38:30 +0000 (11:38 +0200)]
dundi: fix NULL dereference.
If a negative (error) return is received from dundi_lookup_internal,
this is not handled correctly when assigning the result to the buffer.
As such, use a signed integer in the assignment and do a proper
comparison.
When the Asterisk receives 200 OK with invalid SDP,
the Asterisk/PJPROJECT terminating the session.
But if the channel was in the Bridge, Asterisk tries send
the Re-Invite before terminating the session.
And when the Asterisk sending the Re-Invite, it doesn't check
the SDP is NULL or not. This crashes the Asterisk.
Fixed it to close the session correctly if the UAS sends the
200 OK with wrong SDP.
Jaco Kroon [Wed, 18 Mar 2020 09:49:39 +0000 (11:49 +0200)]
build: enable building with uClibc
This patch has been included in Gentoo distribution for at least since
asterisk 1.8, but there are references in the logs going back as far as
1.0.0 - not sure if this is still required in any way, it does apply,
and it doesn't (as far as we can determine) cause build failures.
Joshua C. Colp [Thu, 19 Mar 2020 13:48:39 +0000 (10:48 -0300)]
res_pjsip_session: Don't restrict non-audio default streams to sendrecv.
The state of the default audio stream is used for hold/unhold so we
restrict it to sendrecv as the core does not handle when it changes as
a result of hold/unhold.
This restriction does not apply to other media types though so we now
only restrict it to audio. This allows the other default streams to
store their state at all values, and not just sendrecv and removed.
chan_psip, res_pjsip_sdp_rtp: ignore rtptimeout if direct-media is active
Do not hang up a PJSIP channel on RTP timeout if that channel is in
a direct-media bridge. Also reset the time of the last received RTP packet when
direct-media ends (wait full rtp_timeout period before checking first time after
audio came back to Asterisk).
ASTERISK-28774 Reported-by: Michael Neuhauser
Change-Id: I8b62012be7685849e8fb2b1c5dd39d35313ca2d1
Jaco Kroon [Wed, 27 Nov 2019 13:54:39 +0000 (15:54 +0200)]
res_rtp_asterisk: implement ACL mechanism for ICE and STUN addresses.
A pure blacklist is not good enough, we need a whitelist mechanism as
well, and the simplest way to do that is to re-use existing ACL
infrastructure.
This makes it simpler to blacklist say an entire block (/24) except a
smaller block (eg, a /29 or even a /32). Normally you'd need to
recursively split the block, so if you want to blacklist a /24 except
for a /29 you'd end up with a blacklit for a /25, /26, /27 and /28. I
feel that having an ACL instead of a blacklist only is clearer.
So in order to remain backwards compatible we need to detect this API
change, and adjust accordingly. The simplest is to notice that the
bfd_get_section_size and bfd_get_section_vma MACROs are no longer
defined, and define then onto the new API. The alternative is to litter
the code with a number of #ifdef #else #endif splatters right through
the code.
Joshua C. Colp [Thu, 12 Mar 2020 14:22:06 +0000 (11:22 -0300)]
audiohook: Don't allow audiohooks to attach to hung up channels.
Given a scenario where MixMonitor was initiated over AMI it
was possible for the channel and MixMonitor thread to remain
alive past hang up of the channel. This scenario required
the AMI initiated MixMonitor to retrieve the channel, a
hangup to occur on the channel in another thread, and then
for MixMonitor to actually start. If this occurred the
MixMonitor thread would remain alive indefinitely and
the channel reference would remain.
This change ensures that audiohooks are never able to
be attached to channels that have been hung up. An
additional fix has also been done in app_mixmonitor to
properly release the channel reference if this occurs.
George Joseph [Wed, 4 Mar 2020 21:45:40 +0000 (14:45 -0700)]
CI: Create generic jenkinsfile
This is a generic jenkinsfile to build Asterisk and optionally
perform one or more of the following:
* Publish the API docs to the wiki
* Run the Unit tests
* Run Testsuite Tests
This job can be triggered manually from Jenkins or be triggered
automatically on a schedule based on a cron string.
Torrey Searle [Fri, 6 Mar 2020 16:13:34 +0000 (17:13 +0100)]
res_rtp_asterisk: Send correct sender SSRC when p2p bridge in use
bridge_p2p_rtp_write will forward rtp to the bridged rtp instance
without modifying the ssrc. However, it is not updating the SSRC
in the bridged rtp. Thus, when SSRC packets are generated, they
have the correct SSRC for the sender.
Torrey Searle [Thu, 5 Mar 2020 09:08:54 +0000 (10:08 +0100)]
res_pjsip_sdp_rtp: Don't wait for ICE if not negotiated
If ICE support is enabled but not negotiated, the rtp->ice structure is
not being destroyed. This leads to Asterisk waiting for ICE to complete
instead of immediately starting the DTLS handshake, resulting in the
call leg having no RTP.
Paulo Vicentini [Wed, 26 Feb 2020 00:30:04 +0000 (01:30 +0100)]
chan_pjsip: Check audio frame when remote SSRC changes.
If the SSRC of a received RTP packet differed from the previous SSRC
an SSRC change control frame would be queued ahead of the media
frame. In the case of audio this would result in the format of the
audio frame not being checked, and if it differed or was not allowed
then it could cause the call to drop due to failure to set up a
translation path.
The chan_pjsip module will now no longer assume the first frame
will be the audio frame and instead goes through the complete list
to find it.
Sean Bright [Fri, 6 Mar 2020 20:59:37 +0000 (15:59 -0500)]
enum.c: Add support for regular expression flag in NAPTR record
A regular expression in a NAPTR response record can have a trailing
'i' flag to indicate that the expression should be evaluated in a
case-insensitive way. We were not checking for that flag which caused
the record parsing to fail on otherwise valid input.
Although this change will initially go into Asterisk 13, 16, and 17,
it is my intention to replace the majority of this code in 16 and up -
including this fix - by changing enum.c to consume the new DNS API
which duplicates most of this logic already. Asterisk 13 doesn't have
the DNS API, so this fix will be as good as it gets.
res_rtp_asterisk: Add 'rtp show settings' cli command
This change introduce a CLI command for the RTP to display the general
configuration.
In the first step add the follow fields of the configurations:
- rtpstart
- rtpend
- dtmftimeout
- rtpchecksum
- strictrtp
- learning_min_sequential
- icesupport
Sean Bright [Wed, 4 Mar 2020 22:53:57 +0000 (17:53 -0500)]
enum.c: Make ast_get_txt() actually do something.
The ast_get_txt() API function (and by extension, the TXTCIDNAME
dialplan function) were broken in 65b8381550a9f46fdce84de79960073e9d51b05d such that we would never
actually make a DNS TXT query as described.
Sebastian Kemper [Sun, 12 Jan 2020 11:37:46 +0000 (12:37 +0100)]
check_expr2: fix cross-compile/hardening issues
When building check_expr2 with ASLR PIE hardening enabled the linker
fails. This is resolved by adding the regular compiler flags when
building the object files from ast_expr2f.c and ast_expr2.c.
Note: The STANDALONE define is removed because it is already defined in
_ASTCFLAGS. YY_NO_INPUT is defined so that the compile survives
'--enable-dev-mode'.
Also, a Makefile variable "CROSS_COMPILING" is added so that the
build system doesn't try to run check_expr2 when cross-compiling,
because that will fail the build as will.
ASTERISK-28685 #close
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Change-Id: If435b7db9f9ad8266245bda51c81c220f9658915
Joshua C. Colp [Thu, 20 Feb 2020 17:33:42 +0000 (17:33 +0000)]
res_rtp_asterisk: Improve video performance in certain networks.
The receive buffer will now grow if we end up flushing the
receive queue after not receiving the expected packet in time.
This is done in hopes that if this is encountered again the
extra buffer size will allow more time to pass and any missing
packets to be received.
The send buffer will now grow if we are asked for packets and
can't find them. This is done in hopes that the packets are
from the past and have simply been expired. If so then in
the future with the extra buffer space the packets should be
available.
Sequence number cycling has been handled so that the
correct sequence number is calculated and used in
various places, including for sorting packets and
for determining if a packet is old or not.
NACK sending is now more aggressive. If a substantial number
of missing sequence numbers are added a NACK will be sent
immediately. Afterwards once the receive buffer reaches 25%
a single NACK is sent. If the buffer continues to grow and
reaches 50% or greater a NACK will be sent for each received
future packet to aggressively ask the remote endpoint to
retransmit.
Kevin Harwell [Fri, 28 Feb 2020 18:54:14 +0000 (12:54 -0600)]
message & stasis/messaging: make text message variables work in ARI
When a text message was received any associated variable was not written to
the ARI TextMessageReceived event. This occurred because Asterisk only wrote
out "send" variables. However, even those "send" variables would fail ARI
validation due to a TextMessageVariable formatting bug.
Since it seems the TextMessageReceived event has never been able to include
actual variables it was decided to remove the TextMessageVariable object type
from ARI, and simply return a JSON object of key/value pairs for variables.
This aligns more with how the ARI sendMessage handles variables, and other
places in ARI.
That being the case, and since this is technically an API breaking change (no
one should really be affected since things never really worked) the ARI version
was updated to reflect that.
Jaco Kroon [Thu, 20 Feb 2020 12:52:06 +0000 (14:52 +0200)]
addons/res_config_mysql: silense warnings about printf format errors.
Warnings without this:
res_config_mysql.c: In function 'update2_mysql':
res_config_mysql.c:741:15: warning: format '%llu' expects argument of type
'long long unsigned int', but argument 6 has type 'my_ulonglong'
{aka 'long unsigned int'} [-Wformat=]
ast_debug(1, "MySQL RealTime: Updated %llu rows on table: %s\n",
numrows, tablename);
Joshua C. Colp [Tue, 18 Feb 2020 13:10:16 +0000 (13:10 +0000)]
pjsip: Update ACLs on named ACL changes.
This change extends the Sorcery API to allow a wizard to be
told to explicitly reload objects or a specific object type
even if the wizard believes that nothing has changed.
This has been leveraged by res_pjsip and res_pjsip_acl to
reload endpoints and PJSIP ACLs when a named ACL changes.
George Joseph [Thu, 13 Feb 2020 19:39:58 +0000 (12:39 -0700)]
res_pjsip_outbound_registration: Fix SRV failover on timeout
In order to retry outbound registrations for some situations, we
need access to the tdata from the original request. For instance,
for 401/407 responses we need it to properly construct the
subsequent request with the authentication. We also need it if
we're iterating over a DNS SRV response record set so we can skip
entries we've already tried.
We've been getting the tdata from the server response rdata and
transaction but that only works for the failures where there was
actually a response (4XX, 5XX, etc). For timeouts there's no
response and therefore no rdata or transaction from which to get
the tdata. When processing a single A/AAAA record for a server,
this wasn't an issue as we just retried that same server after the
retry timer expired. If we got an SRV record set for the server
though, without the state from the tdata, we just kept trying the
first entry in the set repeatedly instead of skipping to the next
one in the list.
* Added a "last_tdata" member to the client state structure to keep
track of the sent tdata.
* Updated registration_client_send() to save the tdata it used into
the client_state.
* Updated sip_outbound_registration_response_cb() to use the tdata
saved in client_state when we don't get a response from the
server. We still use the tdata from the transaction when we DO
get a response from the server so we can properly handle 4XX
responses where our new request depends on it.
General note on timeouts:
Although res_pjsip_outbound_registration skips to the next record
immediately when a timeout occurs during SRV set traversal, it's
pjproject that determines how long to wait before a timeout is
declared. As with other SIP message types, pjproject will continue
trying the same server at an interval specified by "timer_t1" until
"timer_b" expires. Both of those timers are set in the pjsip.conf
"system" section.
Joshua C. Colp [Sun, 5 Jan 2020 00:11:20 +0000 (00:11 +0000)]
bridging: Add better support for adding/removing streams.
This change adds support to bridge_softmix to allow the addition
and removal of additional video source streams. When such a change
occurs each participant is renegotiated as needed to reflect the
update. If another video source is added then each participant
gets another source. If a video source is removed then it is
removed from each participant. This functionality allows you to
have both your webcam and screenshare providing video if you
desire, or even more streams. Mapping has been changed to use
the topology index on the source channel as a unique identifier
for outgoing participant streams, this will never change and
provides an easy way to establish the mapping.
The bridge_simple and bridge_native_rtp modules have also been
updated to renegotiate when the stream topology of a party changes
allowing the same behavior to occur as added to bridge_softmix.
If a screen share is added then the opposite party is renegotiated.
If that screen share is removed then the opposite party is
renegotiated again.
Some additional fixes are also included in here. Stream state is
now conveyed in SDP so sendonly/recvonly/inactive streams can
be requested. Removed streams now also remove previous state
from themselves so consumers don't get confused.
Ben Ford [Thu, 23 Jan 2020 19:17:06 +0000 (13:17 -0600)]
RTP/ICE: Send on first valid pair.
When handling ICE negotiations, it's possible that there can be a delay
between STUN binding requests which in turn will cause a delay in ICE
completion, preventing media from flowing. It should be possible to send
media when there is at least one valid pair, preventing this scenario
from occurring.
A change was added to PJPROJECT that adds an optional callback
(on_valid_pair) that will be called when the first valid pair is found
during ICE negotiation. Asterisk uses this to start the DTLS handshake,
allowing media to flow. It will only be called once, either on the first
valid pair, or when ICE negotiation is complete.
Sean Bright [Mon, 17 Feb 2020 14:05:16 +0000 (09:05 -0500)]
app_mixmonitor: Set MIXMONITOR_FILENAME to correct value when wav49 is used
When opening a file for writing, Asterisk silently converts filenames
ending with 'wav49' to 'WAV.' We aren't taking that in to account when
setting the MIXMONITOR_FILENAME variable in MixMonitor.
* If the user wants to write to a wav49 file, make sure that it is
reflected properly in MIXMONITOR_FILENAME.
* Add a note to the documentation describing this behavior.
* Add a note in main/file.c indicating that app_mixmonitor needs to be
changed if the logic in build_filename was changed.
Torrey Searle [Wed, 12 Feb 2020 16:05:11 +0000 (17:05 +0100)]
res_pjsip_sdp_rtp: implement hold state handling on moh_passthrough
When moh_passthrough is used, asterisk is only generating invites
of type sendonly and sendrecv instead of taking fully into account
the on hold state of the local and remote parties
Kevin Harwell [Thu, 13 Feb 2020 21:08:10 +0000 (15:08 -0600)]
res_rtp_asterisk: bad audio (static) due to incomplete dtls/srtp setup
There was a race condition between client initiated DTLS setup, and handling
of server side ice completion that caused the underlying SSL object to get
cleared during DTLS initialization. If this happened Asterisk would be left
in a partial DTLS setup state. RTP packets were sent and received, but were
not being encrypted and decrypted. This resulted in no audio, or static.
Specifically, this occurred when '__rtp_recvfrom' was processing the handshake
sequence from the client to the server, and then 'ast_rtp_on_ice_complete'
gets called from another thread and clears the SSL object when calling the
'dtls_perform_setup' function. The timing had to be just right in the sense
that from the external SSL library perspective SSL initialization completed
(rtp recv), Asterisk clears/resets the SSL object (ice done), and then checks
to see if SSL is intialized (rtp recv). Since it was cleared, Asterisk thinks
it is not finished, thus not completing 'dtls_srtp_setup'.
This patch removes calls to 'dtls_perform_setup', which clears the SSL object,
in 'ast_rtp_on_ice_complete'. When ice completes, there is no reason to clear
the underlying SSL object. If an ice candidate changes a full protocol level
renegotiation occurs. Also, in the case of bundled ICE candidates are reused
when a stream is added. So no real reason to have to clear, and reset in this
instance.
Also, this patch adds a bit of extra logging to aid in diagnosis of any future
problems.
Sean Bright [Tue, 11 Feb 2020 13:46:02 +0000 (08:46 -0500)]
res_musiconhold: Avoid spurious warning when 'format' is the empty string
The change to res_config_odbc that allowed empty strings to be
returned to realtime consumers¹ causes a warning to be emitted when
loading MoH classes. So we need to treat an empty 'format' as if it
was not specified to avoid the warning.
Given a scenario where session refreshes occur close to
each other while another is finishing it was possible for
the session refreshes to occur out of order. It was
also possible for session refreshes to be delayed for
quite some time if a session refresh did not result in
a topology change.
For the out of order session refreshes the first session
refresh would be queued due to a transaction in progress.
This transaction would then finish. When finished a
separate task to process the delayed requests queue
would be queued for handling. A second refresh would
be requested internally before this delayed request
queued task was processed. As no transaction was in
progress this session refresh would be immediately
handled before the queued session refresh.
The code will now check if any delayed requests exist
before allowing a session refresh to immediately occur.
If any exist then the session refresh is queued.
For the delayed session refreshes if a session refresh
did not result in a topology change the attempt would
be immediately stopped and no other delayed requests would
be processed.
The code will now go through the entire delayed requests
queue until a delayed request results in a request
actually being sent.
projects / thirdparty / asterisk.git / log
