Oliver Upton [Mon, 11 Nov 2024 18:38:30 +0000 (18:38 +0000)]
Merge branch kvm-arm64/mpam-ni into kvmarm/next
* kvm-arm64/mpam-ni:
: Hiding FEAT_MPAM from KVM guests, courtesy of James Morse + Joey Gouly
:
: Fix a longstanding bug where FEAT_MPAM was accidentally exposed to KVM
: guests + the EL2 trap configuration was not explicitly configured. As
: part of this, bring in skeletal support for initialising the MPAM CPU
: context so KVM can actually set traps for its guests.
:
: Be warned -- if this series leads to boot failures on your system,
: you're running on turd firmware.
:
: As an added bonus (that builds upon the infrastructure added by the MPAM
: series), allow userspace to configure CTR_EL0.L1Ip, courtesy of Shameer
: Kolothum.
KVM: arm64: Make L1Ip feature in CTR_EL0 writable from userspace
KVM: arm64: selftests: Test ID_AA64PFR0.MPAM isn't completely ignored
KVM: arm64: Disable MPAM visibility by default and ignore VMM writes
KVM: arm64: Add a macro for creating filtered sys_reg_descs entries
KVM: arm64: Fix missing traps of guest accesses to the MPAM registers
arm64: cpufeature: discover CPU support for MPAM
arm64: head.S: Initialise MPAM EL2 registers and disable traps
arm64/sysreg: Convert existing MPAM sysregs and add the remaining entries
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Oliver Upton [Mon, 11 Nov 2024 18:36:46 +0000 (18:36 +0000)]
Merge branch kvm-arm64/psci-1.3 into kvmarm/next
* kvm-arm64/psci-1.3:
: PSCI v1.3 support, courtesy of David Woodhouse
:
: Bump KVM's PSCI implementation up to v1.3, with the added bonus of
: implementing the SYSTEM_OFF2 call. Like other system-scoped PSCI calls,
: this gets relayed to userspace for further processing with a new
: KVM_SYSTEM_EVENT_SHUTDOWN flag.
:
: As an added bonus, implement client-side support for hibernation with
: the SYSTEM_OFF2 call.
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
KVM: arm64: nvhe: Pass through PSCI v1.3 SYSTEM_OFF2 call
KVM: selftests: Add test for PSCI SYSTEM_OFF2
KVM: arm64: Add support for PSCI v1.2 and v1.3
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
firmware/psci: Add definitions for PSCI v1.3 specification
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Oliver Upton [Mon, 11 Nov 2024 18:36:12 +0000 (18:36 +0000)]
Merge branch kvm-arm64/nv-s1pie-s1poe into kvmarm/next
* kvm-arm64/nv-s1pie-s1poe: (36 commits)
: NV support for S1PIE/S1POE, courtesy of Marc Zyngier
:
: Complete support for S1PIE/S1POE at vEL2, including:
:
: - Save/restore of the vEL2 sysreg context
:
: - Use the S1PIE/S1POE context for fast-path AT emulation
:
: - Enlightening the software walker to the behavior of S1PIE/S1POE
:
: - Like any other good NV series, some trap routing descriptions
KVM: arm64: Handle WXN attribute
KVM: arm64: Handle stage-1 permission overlays
KVM: arm64: Make PAN conditions part of the S1 walk context
KVM: arm64: Disable hierarchical permissions when POE is enabled
KVM: arm64: Add POE save/restore for AT emulation fast-path
KVM: arm64: Add save/restore support for POR_EL2
KVM: arm64: Add basic support for POR_EL2
KVM: arm64: Add kvm_has_s1poe() helper
KVM: arm64: Subject S1PIE/S1POE registers to HCR_EL2.{TVM,TRVM}
KVM: arm64: Drop bogus CPTR_EL2.E0POE trap routing
arm64: Add encoding for POR_EL2
KVM: arm64: Rely on visibility to let PIR*_ELx/TCR2_ELx UNDEF
KVM: arm64: Hide S1PIE registers from userspace when disabled for guests
KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests
KVM: arm64: Define helper for EL2 registers with custom visibility
KVM: arm64: Add a composite EL2 visibility helper
KVM: arm64: Implement AT S1PIE support
KVM: arm64: Disable hierarchical permissions when S1PIE is enabled
KVM: arm64: Split S1 permission evaluation into direct and hierarchical parts
KVM: arm64: Add AT fast-path support for S1PIE
...
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Shameer Kolothum [Tue, 22 Oct 2024 07:39:43 +0000 (08:39 +0100)]
KVM: arm64: Make L1Ip feature in CTR_EL0 writable from userspace
Only allow userspace to set VIPT(0b10) or PIPT(0b11) for L1Ip based on
what hardware reports as both AIVIVT (0b01) and VPIPT (0b00) are
documented as reserved.
Using a VIPT for Guest where hardware reports PIPT may lead to over
invalidation, but is still correct. Hence, we can allow downgrading
PIPT to VIPT, but not the other way around.
James Morse [Wed, 30 Oct 2024 16:03:17 +0000 (16:03 +0000)]
KVM: arm64: selftests: Test ID_AA64PFR0.MPAM isn't completely ignored
The ID_AA64PFR0.MPAM bit was previously accidentally exposed to guests,
and is ignored by KVM. KVM will always present the guest with 0 here,
and trap the MPAM system registers to inject an undef.
But, this value is still needed to prevent migration when the value
is incompatible with the target hardware. Add a kvm unit test to try
and write multiple values to ID_AA64PFR0.MPAM. Only the hardware value
previously exposed should be ignored, all other values should be
rejected.
Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Joey Gouly <joey.gouly@arm.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20241030160317.2528209-8-joey.gouly@arm.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
James Morse [Wed, 30 Oct 2024 16:03:16 +0000 (16:03 +0000)]
KVM: arm64: Disable MPAM visibility by default and ignore VMM writes
commit 011e5f5bf529f ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling. A previous patch supplied the missing trap
handling.
Existing VMs that have the MPAM field of ID_AA64PFR0_EL1 set need to
be migratable, but there is little point enabling the MPAM CPU
interface on new VMs until there is something a guest can do with it.
Clear the MPAM field from the guest's ID_AA64PFR0_EL1 and on hardware
that supports MPAM, politely ignore the VMMs attempts to set this bit.
Guests exposed to this bug have the sanitised value of the MPAM field,
so only the correct value needs to be ignored. This means the field
can continue to be used to block migration to incompatible hardware
(between MPAM=1 and MPAM=5), and the VMM can't rely on the field
being ignored.
Signed-off-by: James Morse <james.morse@arm.com> Co-developed-by: Joey Gouly <joey.gouly@arm.com> Signed-off-by: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20241030160317.2528209-7-joey.gouly@arm.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
James Morse [Wed, 30 Oct 2024 16:03:15 +0000 (16:03 +0000)]
KVM: arm64: Add a macro for creating filtered sys_reg_descs entries
The sys_reg_descs array holds function pointers and reset value for
managing the user-space and guest view of system registers. These
are mostly created by a set of macro's as only some combinations
of behaviour are needed.
If a register needs special treatment, its sys_reg_descs entry is
open-coded. This is true of some id registers where the value provided
by user-space is validated by some helpers.
Before adding another one of these, add a helper that covers the
existing special cases. 'ID_FILTERED' expects helpers to set the
user-space value, and retrieve the modified reset value.
Like ID_WRITABLE() this uses id_visibility(), which should have no
functional change for the registers converted to use ID_FILTERED().
read_sanitised_id_aa64dfr0_el1() and read_sanitised_id_aa64pfr0_el1()
have been refactored to be called from kvm_read_sanitised_id_reg(), to
try be consistent with ID_WRITABLE().
Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20241030160317.2528209-6-joey.gouly@arm.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
James Morse [Wed, 30 Oct 2024 16:03:14 +0000 (16:03 +0000)]
KVM: arm64: Fix missing traps of guest accesses to the MPAM registers
commit 011e5f5bf529f ("arm64/cpufeature: Add remaining feature bits in
ID_AA64PFR0 register") exposed the MPAM field of AA64PFR0_EL1 to guests,
but didn't add trap handling.
If you are unlucky, this results in an MPAM aware guest being delivered
an undef during boot. The host prints:
| kvm [97]: Unsupported guest sys_reg access at: ffff800080024c64 [00000005]
| { Op0( 3), Op1( 0), CRn(10), CRm( 5), Op2( 0), func_read },
Add the support to enable the traps, and handle the three guest accessible
registers by injecting an UNDEF. This stops KVM from spamming the host
log, but doesn't yet hide the feature from the id registers.
With MPAM v1.0 we can trap the MPAMIDR_EL1 register only if
ARM64_HAS_MPAM_HCR, with v1.1 an additional MPAM2_EL2.TIDR bit traps
MPAMIDR_EL1 on platforms that don't have MPAMHCR_EL2. Enable one of
these if either is supported. If neither is supported, the guest can
discover that the CPU has MPAM support, and how many PARTID etc the
host has ... but it can't influence anything, so its harmless.
James Morse [Wed, 30 Oct 2024 16:03:13 +0000 (16:03 +0000)]
arm64: cpufeature: discover CPU support for MPAM
ARMv8.4 adds support for 'Memory Partitioning And Monitoring' (MPAM)
which describes an interface to cache and bandwidth controls wherever
they appear in the system.
Add support to detect MPAM. Like SVE, MPAM has an extra id register that
describes some more properties, including the virtualisation support,
which is optional. Detect this separately so we can detect
mismatched/insane systems, but still use MPAM on the host even if the
virtualisation support is missing.
MPAM needs enabling at the highest implemented exception level, otherwise
the register accesses trap. The 'enabled' flag is accessible to lower
exception levels, but its in a register that traps when MPAM isn't enabled.
The cpufeature 'matches' hook is extended to test this on one of the
CPUs, so that firmware can emulate MPAM as disabled if it is reserved
for use by secure world.
Secondary CPUs that appear late could trip cpufeature's 'lower safe'
behaviour after the MPAM properties have been advertised to user-space.
Add a verify call to ensure late secondaries match the existing CPUs.
(If you have a boot failure that bisects here its likely your CPUs
advertise MPAM in the id registers, but firmware failed to either enable
or MPAM, or emulate the trap as if it were disabled)
Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20241030160317.2528209-4-joey.gouly@arm.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
James Morse [Wed, 30 Oct 2024 16:03:12 +0000 (16:03 +0000)]
arm64: head.S: Initialise MPAM EL2 registers and disable traps
Add code to head.S's el2_setup to detect MPAM and disable any EL2 traps.
This register resets to an unknown value, setting it to the default
parititons/pmg before we enable the MMU is the best thing to do.
Kexec/kdump will depend on this if the previous kernel left the CPU
configured with a restrictive configuration.
If linux is booted at the highest implemented exception level el2_setup
will clear the enable bit, disabling MPAM.
This code can't be enabled until a subsequent patch adds the Kconfig
and cpufeature boiler plate.
Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20241030160317.2528209-3-joey.gouly@arm.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
David Woodhouse [Sat, 19 Oct 2024 17:15:47 +0000 (18:15 +0100)]
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
The PSCI v1.3 specification adds support for a SYSTEM_OFF2 function
which is analogous to ACPI S4 state. This will allow hosting
environments to determine that a guest is hibernated rather than just
powered off, and handle that state appropriately on subsequent launches.
Since commit 60c0d45a7f7a ("efi/arm64: use UEFI for system reset and
poweroff") the EFI shutdown method is deliberately preferred over PSCI
or other methods. So register a SYS_OFF_MODE_POWER_OFF handler which
*only* handles the hibernation, leaving the original PSCI SYSTEM_OFF as
a last resort via the legacy pm_power_off function pointer.
The hibernation code already exports a system_entering_hibernation()
function which is be used by the higher-priority handler to check for
hibernation. That existing function just returns the value of a static
boolean variable from hibernate.c, which was previously only set in the
hibernation_platform_enter() code path. Set the same flag in the simpler
code path around the call to kernel_power_off() too.
An alternative way to hook SYSTEM_OFF2 into the hibernation code would
be to register a platform_hibernation_ops structure with an ->enter()
method which makes the new SYSTEM_OFF2 call. But that would have the
unwanted side-effect of making hibernation take a completely different
code path in hibernation_platform_enter(), invoking a lot of special dpm
callbacks.
Another option might be to add a new SYS_OFF_MODE_HIBERNATE mode, with
fallback to SYS_OFF_MODE_POWER_OFF. Or to use the sys_off_data to
indicate whether the power off is for hibernation.
But this version works and is relatively simple.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20241019172459.2241939-7-dwmw2@infradead.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Marc Zyngier [Wed, 23 Oct 2024 14:53:45 +0000 (15:53 +0100)]
KVM: arm64: Handle WXN attribute
Until now, we didn't really care about WXN as it didn't have an
effect on the R/W permissions (only the execution could be droppped),
and therefore not of interest for AT.
However, with S1POE, WXN can revoke the Write permission if an
overlay is active and that execution is allowed. This *is* relevant
to AT.
Add full handling of WXN so that we correctly handle this case.
Marc Zyngier [Wed, 23 Oct 2024 14:53:44 +0000 (15:53 +0100)]
KVM: arm64: Handle stage-1 permission overlays
We now have the intrastructure in place to emulate S1POE:
- direct permissions are always overlay-capable
- indirect permissions are overlay-capable if the permissions are
in the 0b0xxx range
- the overlays are strictly substractive
Marc Zyngier [Wed, 23 Oct 2024 14:53:41 +0000 (15:53 +0100)]
KVM: arm64: Add POE save/restore for AT emulation fast-path
Just like the other extensions affecting address translation,
we must save/restore POE so that an out-of-context translation
context can be restored and used with the AT instructions.
Marc Zyngier [Wed, 23 Oct 2024 14:53:39 +0000 (15:53 +0100)]
KVM: arm64: Add basic support for POR_EL2
S1POE support implies support for POR_EL2, which we provide by
- adding it to the vcpu_sysreg enum
- advertising it as mapped to its EL1 counterpart in get_el2_to_el1_mapping
- wiring it in the sys_reg_desc table with the correct visibility
- handling POR_EL1 in __vcpu_{read,write}_sys_reg_from_cpu()
Marc Zyngier [Wed, 23 Oct 2024 14:53:36 +0000 (15:53 +0100)]
KVM: arm64: Drop bogus CPTR_EL2.E0POE trap routing
It took me some time to realise it, but CPTR_EL2.E0POE does not
apply to a guest, only to EL0 when InHost(). And when InHost(),
CPCR_EL2 is mapped to CPACR_EL1, maning that the E0POE bit naturally
takes effect without any trap.
To sum it up, this trap bit is better left ignored, we will never
have to hanedle it.
Marc Zyngier [Wed, 23 Oct 2024 14:53:34 +0000 (15:53 +0100)]
KVM: arm64: Rely on visibility to let PIR*_ELx/TCR2_ELx UNDEF
With a visibility defined for these registers, there is no need
to check again for S1PIE or TCRX being implemented as perform_access()
already handles it.
Mark Brown [Wed, 23 Oct 2024 14:53:33 +0000 (15:53 +0100)]
KVM: arm64: Hide S1PIE registers from userspace when disabled for guests
When the guest does not support S1PIE we should not allow any access
to the system registers it adds in order to ensure that we do not create
spurious issues with guest migration. Add a visibility operation for these
registers.
Mark Brown [Wed, 23 Oct 2024 14:53:32 +0000 (15:53 +0100)]
KVM: arm64: Hide TCR2_EL1 from userspace when disabled for guests
When the guest does not support FEAT_TCR2 we should not allow any access
to it in order to ensure that we do not create spurious issues with guest
migration. Add a visibility operation for it.
Mark Brown [Wed, 23 Oct 2024 14:53:31 +0000 (15:53 +0100)]
KVM: arm64: Define helper for EL2 registers with custom visibility
In preparation for adding more visibility filtering for EL2 registers add
a helper macro like EL2_REG() which allows specification of a custom
visibility operation.
Marc Zyngier [Wed, 23 Oct 2024 14:53:30 +0000 (15:53 +0100)]
KVM: arm64: Add a composite EL2 visibility helper
We are starting to have a bunch of visibility helpers checking
for EL2 + something else, and we are going to add more.
Simplify things somehow by introducing a helper that implement
extractly that by taking a visibility helper as a parameter,
and convert the existing ones to that.
Marc Zyngier [Wed, 23 Oct 2024 14:53:29 +0000 (15:53 +0100)]
KVM: arm64: Implement AT S1PIE support
It doesn't take much effort to implement S1PIE support in AT.
It is only a matter of using the AArch64.S1IndirectBasePermissions()
encodings for the permission, ignoring GCS which has no impact on AT,
and enforce FEAT_PAN3 being enabled as this is a requirement of
FEAT_S1PIE.
Marc Zyngier [Wed, 23 Oct 2024 14:53:28 +0000 (15:53 +0100)]
KVM: arm64: Disable hierarchical permissions when S1PIE is enabled
S1PIE implicitly disables hierarchical permissions, as specified in
R_JHSVW, by making TCR_ELx.HPDn RES1.
Add a predicate for S1PIE being enabled for a given translation regime,
and emulate this behaviour by forcing the hpd field to true if S1PIE
is enabled for that translation regime.
Marc Zyngier [Wed, 23 Oct 2024 14:53:27 +0000 (15:53 +0100)]
KVM: arm64: Split S1 permission evaluation into direct and hierarchical parts
The AArch64.S1DirectBasePermissions() pseudocode deals with both
direct and hierarchical S1 permission evaluation. While this is
probably convenient in the pseudocode, we would like a bit more
flexibility to slot things like indirect permissions.
To that effect, split the two permission check parts out of
handle_at_slow() and into their own functions. The permissions
are passed around as part of the walk_result structure.
Marc Zyngier [Wed, 23 Oct 2024 14:53:23 +0000 (15:53 +0100)]
KVM: arm64: Add save/restore for PIR{,E0}_EL2
Like their EL1 equivalent, the EL2-specific FEAT_S1PIE registers
are context-switched. This is made conditional on both FEAT_TCRX
and FEAT_S1PIE being adversised.
Note that this change only makes sense if read together with the
issue D22677 contained in 102105_K.a_04_en.
Marc Zyngier [Wed, 23 Oct 2024 14:53:17 +0000 (15:53 +0100)]
KVM: arm64: Extend masking facility to arbitrary registers
We currently only use the masking (RES0/RES1) facility for VNCR
registers, as they are memory-based and thus easy to sanitise.
But we could apply the same thing to other registers if we:
- split the sanitisation from __VNCR_START__
- apply the sanitisation when reading from a HW register
This involves a new "marker" in the vcpu_sysreg enum, which
defines the point at which the sanitisation applies (the VNCR
registers being of course after this marker).
Whle we are at it, rename kvm_vcpu_sanitise_vncr_reg() to
kvm_vcpu_apply_reg_masks(), which is vaguely more explicit,
and harden set_sysreg_masks() against setting masks for
random registers...
Marc Zyngier [Wed, 23 Oct 2024 14:53:16 +0000 (15:53 +0100)]
KVM: arm64: Correctly access TCR2_EL1, PIR_EL1, PIRE0_EL1 with VHE
For code that accesses any of the guest registers for emulation
purposes, it is crucial to know where the most up-to-date data is.
While this is pretty clear for nVHE (memory is the sole repository),
things are a lot muddier for VHE, as depending on the SYSREGS_ON_CPU
flag, registers can either be loaded on the HW or be in memory.
Even worse with NV, where the loaded state is by definition partial.
For these reasons, KVM offers the vcpu_read_sys_reg() and
vcpu_write_sys_reg() primitives that always do the right thing.
However, these primitive must know what register to access, and
this is the role of the __vcpu_read_sys_reg_from_cpu() and
__vcpu_write_sys_reg_to_cpu() helpers.
As it turns out, TCR2_EL1, PIR_EL1, PIRE0_EL1 and not described
in the latter helpers, meaning that the AT code cannot use them
to emulate S1PIE.
Add the three registers to the (long) list.
Fixes: 86f9de9db178 ("KVM: arm64: Save/restore PIE registers") Signed-off-by: Marc Zyngier <maz@kernel.org> Cc: Joey Gouly <joey.gouly@arm.com> Reviewed-by: Joey Gouly <joey.gouly@arm.com> Link: https://lore.kernel.org/r/20241023145345.1613824-9-maz@kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Marc Zyngier [Wed, 23 Oct 2024 14:53:15 +0000 (15:53 +0100)]
KVM: arm64: nv: Save/Restore vEL2 sysregs
Whenever we need to restore the guest's system registers to the CPU, we
now need to take care of the EL2 system registers as well. Most of them
are accessed via traps only, but some have an immediate effect and also
a guest running in VHE mode would expect them to be accessible via their
EL1 encoding, which we do not trap.
For vEL2 we write the virtual EL2 registers with an identical format directly
into their EL1 counterpart, and translate the few registers that have a
different format for the same effect on the execution when running a
non-VHE guest guest hypervisor.
Based on an initial patch from Andre Przywara, rewritten many times
since.
Marc Zyngier [Wed, 23 Oct 2024 14:53:14 +0000 (15:53 +0100)]
KVM: arm64: nv: Handle CNTHCTL_EL2 specially
Accessing CNTHCTL_EL2 is fraught with danger if running with
HCR_EL2.E2H=1: half of the bits are held in CNTKCTL_EL1, and
thus can be changed behind our back, while the rest lives
in the CNTHCTL_EL2 shadow copy that is memory-based.
Yes, this is a lot of fun!
Make sure that we merge the two on read access, while we can
write to CNTKCTL_EL1 in a more straightforward manner.
Marc Zyngier [Wed, 23 Oct 2024 14:53:10 +0000 (15:53 +0100)]
arm64: Remove VNCR definition for PIRE0_EL2
As of the ARM ARM Known Issues document 102105_K.a_04_en, D22677
fixes a problem with the PIRE0_EL2 register, resulting in its
removal from the VNCR page (it had no purpose being there the
first place).
Follow the architecture update by removing this offset.
Marc Zyngier [Wed, 23 Oct 2024 14:53:09 +0000 (15:53 +0100)]
arm64: Drop SKL0/SKL1 from TCR2_EL2
Despite what the documentation says, TCR2_EL2.{SKL0,SKL1} do not exist,
and the corresponding information is in the respective TTBRx_EL2. This
is a leftover from a development version of the architecture.
This change makes TCR2_EL2 similar to TCR2_EL1 in that respect.
Linus Torvalds [Sun, 27 Oct 2024 19:01:36 +0000 (09:01 -1000)]
Merge tag 'x86_urgent_for_v6.12_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prevent a certain range of pages which get marked as hypervisor-only,
to get allocated to a CoCo (SNP) guest which cannot use them and thus
fail booting
- Fix the microcode loader on AMD to pay attention to the stepping of a
patch and to handle the case where a BIOS config option splits the
machine into logical NUMA nodes per L3 cache slice
- Disable LAM from being built by default due to security concerns
* tag 'x86_urgent_for_v6.12_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Ensure that RMP table fixups are reserved
x86/microcode/AMD: Split load_microcode_amd()
x86/microcode/AMD: Pay attention to the stepping dynamically
x86/lam: Disable ADDRESS_MASKING in most cases
Linus Torvalds [Sun, 27 Oct 2024 18:56:22 +0000 (08:56 -1000)]
Merge tag 'ftrace-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace fixes from Steven Rostedt:
- Fix missing mutex unlock in error path of register_ftrace_graph()
A previous fix added a return on an error path and forgot to unlock
the mutex. Instead of dealing with error paths, use guard(mutex) as
the mutex is just released at the exit of the function anyway. Other
functions in this file should be updated with this, but that's a
cleanup and not a fix.
- Change cpuhp setup name to be consistent with other cpuhp states
The same fix that the above patch fixes added a cpuhp_setup_state()
call with the name of "fgraph_idle_init". I was informed that it
should instead be something like: "fgraph:online". Update that too.
* tag 'ftrace-v6.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Change the name of cpuhp state to "fgraph:online"
fgraph: Fix missing unlock in register_ftrace_graph()
Linus Torvalds [Sun, 27 Oct 2024 18:40:33 +0000 (08:40 -1000)]
Merge tag 'platform-drivers-x86-v6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Asus thermal profile fix, fixing performance issues on Lunar Lake
- Intel PMC: one revert for a lockdep issue and one bugfix
- Dell WMI: Ignore some WMI events on suspend/resume to silence warnings
* tag 'platform-drivers-x86-v6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-wmi: Fix thermal profile initialization
platform/x86: dell-wmi: Ignore suspend notifications
platform/x86/intel/pmc: Fix pmc_core_iounmap to call iounmap for valid addresses
platform/x86:intel/pmc: Revert "Enable the ACPI PM Timer to be turned off when suspended"
Linus Torvalds [Sun, 27 Oct 2024 18:36:01 +0000 (08:36 -1000)]
Merge tag 'firewire-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"A single commit to resolve a regression existing in v6.11 or later.
The change in 1394 OHCI driver in v6.11 kernel could cause general
protection faults when rediscovering nodes in IEEE 1394 bus while
holding a spin lock. Consequently, watchdog checks can report a hard
lockup.
Currently, this issue is observed primarily during the system resume
phase when using an extra node with three ports or more is used.
However, it could potentially occur in the other cases as well"
* tag 'firewire-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix invalid port index for parent device
Linus Torvalds [Sun, 27 Oct 2024 18:29:36 +0000 (08:29 -1000)]
Merge tag 'block-6.12-20241026' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Pull request for MD via Song fixing a few issues
- Fix a wrong check in blk_rq_map_user_bvec(), causing IO errors on
passthrough IO (Xinyu)
* tag 'block-6.12-20241026' of git://git.kernel.dk/linux:
block: fix sanity checks in blk_rq_map_user_bvec
md/raid10: fix null ptr dereference in raid10_size()
md: ensure child flush IO does not affect origin bio->bi_status
Linus Torvalds [Sun, 27 Oct 2024 18:23:49 +0000 (08:23 -1000)]
Merge tag 'xfs-6.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
- Fix recovery of allocator ops after a growfs
- Do not fail repairs on metadata files with no attr fork
* tag 'xfs-6.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: update the pag for the last AG at recovery time
xfs: don't use __GFP_RETRY_MAYFAIL in xfs_initialize_perag
xfs: error out when a superblock buffer update reduces the agcount
xfs: update the file system geometry after recoverying superblock buffers
xfs: merge the perag freeing helpers
xfs: pass the exact range to initialize to xfs_initialize_perag
xfs: don't fail repairs on metadata files with no attr fork
Takashi Sakamoto [Fri, 25 Oct 2024 03:41:37 +0000 (12:41 +0900)]
firewire: core: fix invalid port index for parent device
In a commit 24b7f8e5cd65 ("firewire: core: use helper functions for self
ID sequence"), the enumeration over self ID sequence was refactored with
some helper functions with KUnit tests. These helper functions are
guaranteed to work expectedly by the KUnit tests, however their application
includes a mistake to assign invalid value to the index of port connected
to parent device.
This bug affects the case that any extra node devices which has three or
more ports are connected to 1394 OHCI controller. In the case, the path
to update the tree cache could hits WARN_ON(), and gets general protection
fault due to the access to invalid address computed by the invalid value.
This commit fixes the bug to assign correct port index.
Cc: stable@vger.kernel.org Reported-by: Edmund Raile <edmund.raile@proton.me> Closes: https://lore.kernel.org/lkml/8a9902a4ece9329af1e1e42f5fea76861f0bf0e8.camel@proton.me/ Fixes: 24b7f8e5cd65 ("firewire: core: use helper functions for self ID sequence") Link: https://lore.kernel.org/r/20241025034137.99317-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
When support for vivobook fan profiles was added, the initial
call to throttle_thermal_policy_set_default() was removed, which
however is necessary for full initialization.
Fix this by calling throttle_thermal_policy_set_default() again
when setting up the platform profile.
Fixes: bcbfcebda2cb ("platform/x86: asus-wmi: add support for vivobook fan profiles") Reported-by: Michael Larabel <Michael@phoronix.com> Closes: https://www.phoronix.com/review/lunar-lake-xe2/5 Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20241025191514.15032-2-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Linus Torvalds [Fri, 25 Oct 2024 22:25:02 +0000 (15:25 -0700)]
Merge tag '9p-for-6.12-rc5' of https://github.com/martinetd/linux
Pull more 9p reverts from Dominique Martinet:
"Revert patches causing inode collision problems.
The code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes. See the top-most revert (commit be2ca3825372) for details.
This problem had been ignored for too long and the reverts will also
head to stable (6.9+).
I'm confident this set of patches gets us back to previous behaviour
(another related patch had already been reverted back in April and
we're almost back to square 1, and the rest didn't touch inode
lifecycle)"
* tag '9p-for-6.12-rc5' of https://github.com/martinetd/linux:
Revert "fs/9p: simplify iget to remove unnecessary paths"
Revert "fs/9p: fix uaf in in v9fs_stat2inode_dotl"
Revert "fs/9p: remove redundant pointer v9ses"
Revert " fs/9p: mitigate inode collisions"
Linus Torvalds [Fri, 25 Oct 2024 18:45:22 +0000 (11:45 -0700)]
Merge tag 'v6.12-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix init module error caseb
- Fix memory allocation error path (for passwords) in mount
* tag 'v6.12-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix warning when destroy 'cifs_io_request_pool'
smb: client: Handle kstrdup failures for passwords
Linus Torvalds [Fri, 25 Oct 2024 18:41:18 +0000 (11:41 -0700)]
Merge tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix cached size after passthrough writes
This fix needed a trivial change in the backing-file API, which
resulted in some non-fuse files being touched.
- Revert a commit meant as a cleanup but which triggered a WARNING
- Remove a stray debug line left-over
* tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove stray debug line
Revert "fuse: move initialization of fuse_file to fuse_writepages() instead of in callback"
fuse: update inode size after extending passthrough write
fs: pass offset and result to backing_file end_write() callback
Linus Torvalds [Fri, 25 Oct 2024 18:38:15 +0000 (11:38 -0700)]
Merge tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a couple of use-after-free bugs
* tag 'nfsd-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: cancel nfsd_shrinker_work using sync mode in nfs4_state_shutdown_net
nfsd: fix race between laundromat and free_stateid
Linus Torvalds [Fri, 25 Oct 2024 18:04:34 +0000 (11:04 -0700)]
Merge tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix an ACPI PRM (Platform Runtime Mechanism) issue and add two
new DMI quirks, one for an ACPI IRQ override and one for lid switch
detection:
- Make acpi_parse_prmt() look for EFI_MEMORY_RUNTIME memory regions
only to comply with the UEFI specification and make PRM use
efi_guid_t instead of guid_t to avoid a compiler warning triggered
by that change (Koba Ko, Dan Carpenter)
- Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel)
- Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
Panwar)"
* tag 'acpi-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PRM: Clean up guid type in struct prm_handler_info
ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]
ACPI: PRM: Find EFI_MEMORY_RUNTIME block for PRM handler and context
Linus Torvalds [Fri, 25 Oct 2024 18:00:50 +0000 (11:00 -0700)]
Merge tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Update cpufreq documentation to match the code after recent changes
(Christian Loehle), fix a units conversion issue in the CPPC cpufreq
driver (liwei), and fix an error check in the dtpm_devfreq power
capping driver (Yuan Can)"
* tag 'pm-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: CPPC: fix perf_to_khz/khz_to_perf conversion exception
powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
cpufreq: docs: Reflect latency changes in docs
Linus Torvalds [Fri, 25 Oct 2024 17:56:06 +0000 (10:56 -0700)]
Merge tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Hold the rescan lock while adding devices to avoid race with
concurrent pwrctl rescan that can lead to a crash (Bartosz
Golaszewski)
- Avoid binding pwrctl driver to QCom WCN wifi if the DT lacks the
necessary PMU regulator descriptions (Bartosz Golaszewski)
* tag 'pci-v6.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/pwrctl: Abandon QCom WCN probe on pre-pwrseq device-trees
PCI: Hold rescan lock while adding devices during host probe
Linus Torvalds [Fri, 25 Oct 2024 17:42:29 +0000 (10:42 -0700)]
Merge tag 'ata-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
- Fix the handling of ATA commands that timeout (command that did not
receive a completion interrupt within the configured timeout time).
Commands that timeout, while also having either the FAILFAST flag
set, or the command being a passthrough command, should never be
retried. Restore this behavior (as it was before v6.12-rc1).
* tag 'ata-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata: Set DID_TIME_OUT for commands that actually timed out
Linus Torvalds [Fri, 25 Oct 2024 17:35:29 +0000 (10:35 -0700)]
Merge tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are about ASoC.
There are two core changes in ASoC (the bump of minimal topology ABI
version and the fix for references of components in DAPM code), and
others are mostly various device-specific fixes for SoundWire, AMD,
Intel, SOF, Qualcomm and FSL, in addition to a few usual HD-audio
quirks and fixes"
* tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/realtek: Update default depop procedure
ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc
ASoC: fsl_micfil: Add sample rate constraint
ASoC: rt722-sdca: increase clk_stop_timeout to fix clock stop issue
ALSA: hda/tas2781: select CRC32 instead of CRC32_SARWATE
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()
ASoC: fsl_micfil: Add a flag to distinguish with different volume control types
ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs
ASoC: Change my e-mail to gmail
ASoC: Intel: soc-acpi: lnl: Add match entry for TM2 laptops
ASoC: amd: yc: Fix non-functional mic on ASUS E1404FA
ASoC: SOF: Intel: hda: Always clean up link DMA during stop
soundwire: intel_ace2x: Send PDI stream number during prepare
ASoC: SOF: Intel: hda: Handle prepare without close for non-HDA DAI's
ASoC: SOF: ipc4-topology: Do not set ALH node_id for aggregated DAIs
MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers
ASoC: qcom: Select missing common Soundwire module code on SDM845
ASoC: fsl_esai: change dev_warn to dev_dbg in irq handler
ASoC: rsnd: Fix probe failure on HiHope boards due to endpoint parsing
...
Linus Torvalds [Fri, 25 Oct 2024 17:29:51 +0000 (10:29 -0700)]
Merge tag 'drm-fixes-2024-10-25' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly drm fixes, mostly amdgpu and xe, with minor bridge and an i915
Kconfig fix. Nothing too scary and it seems to be pretty quiet.
i915:
- Fix DRM_I915_GVT_KVMGT dependencies in Kconfig
xe:
- Increase invalidation timeout to avoid errors in some hosts
- Flush worker on timeout
- Better handling for force wake failure
- Improve argument check on user fence creation
- Don't restart parallel queues multiple times on GT reset
bridge:
- aux: Fix assignment of OF node
- tc358767: Add missing of_node_put() in error path"
* tag 'drm-fixes-2024-10-25' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Don't restart parallel queues multiple times on GT reset
drm/xe/ufence: Prefetch ufence addr to catch bogus address
drm/xe: Handle unreliable MMIO reads during forcewake
drm/xe/guc/ct: Flush g2h worker in case of g2h response timeout
drm/xe: Enlarge the invalidation timeout from 150 to 500
drm/amdgpu: handle default profile on on devices without fullscreen 3D
drm/amd/display: Disable PSR-SU on Parade 08-01 TCON too
drm/amdgpu: fix random data corruption for sdma 7
drm/amd/display: temp w/a for DP Link Layer compliance
drm/amd/display: temp w/a for dGPU to enter idle optimizations
drm/amd/pm: update deep sleep status on smu v14.0.2/3
drm/amd/pm: update overdrive function on smu v14.0.2/3
drm/amd/pm: update the driver-fw interface file for smu v14.0.2/3
drm/amd: Guard against bad data for ATIF ACPI method
drm/bridge: tc358767: fix missing of_node_put() in for_each_endpoint_of_node()
drm/bridge: Fix assignment of the of_node of the parent to aux bridge
i915: fix DRM_I915_GVT_KVMGT dependencies
Linus Torvalds [Thu, 24 Oct 2024 20:23:56 +0000 (13:23 -0700)]
x86: fix whitespace in runtime-const assembler output
The x86 user pointer validation changes made me look at compiler output
a lot, and the wrong indentation for the ".popsection" in the generated
assembler triggered me.
Linus Torvalds [Thu, 24 Oct 2024 01:17:46 +0000 (18:17 -0700)]
x86: fix user address masking non-canonical speculation issue
It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical
accesses in kernel space. And so using just the high bit to decide
whether an access is in user space or kernel space ends up with the good
old "leak speculative data" if you have the right gadget using the
result:
CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“
Now, the kernel surrounds the access with a STAC/CLAC pair, and those
instructions end up serializing execution on older Zen architectures,
which closes the speculation window.
But that was true only up until Zen 5, which renames the AC bit [1].
That improves performance of STAC/CLAC a lot, but also means that the
speculation window is now open.
Note that this affects not just the new address masking, but also the
regular valid_user_address() check used by access_ok(), and the asm
version of the sign bit check in the get_user() helpers.
It does not affect put_user() or clear_user() variants, since there's no
speculative result to be used in a gadget for those operations.
Dave Airlie [Fri, 25 Oct 2024 06:55:35 +0000 (16:55 +1000)]
Merge tag 'drm-xe-fixes-2024-10-24-1' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- Increase invalidation timeout to avoid errors in some hosts (Shuicheng)
- Flush worker on timeout (Badal)
- Better handling for force wake failure (Shuicheng)
- Improve argument check on user fence creation (Nirmoy)
- Don't restart parallel queues multiple times on GT reset (Nirmoy)
Steven Rostedt [Fri, 25 Oct 2024 02:29:44 +0000 (22:29 -0400)]
fgraph: Change the name of cpuhp state to "fgraph:online"
The cpuhp state name given to cpuhp_setup_state() is "fgraph_idle_init"
which doesn't really conform to the names that are used for cpu hotplug
setups. Instead rename it to "fgraph:online" to be in line with other
states.
Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/20241024222944.473d88c5@rorschach.local.home Suggested-by: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 2c02f7375e658 ("fgraph: Use CPU hotplug mechanism to initialize idle shadow stacks") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Thu, 24 Oct 2024 23:53:20 +0000 (16:53 -0700)]
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Daniel Borkmann:
- Fix an out-of-bounds read in bpf_link_show_fdinfo for BPF sockmap
link file descriptors (Hou Tao)
- Fix BPF arm64 JIT's address emission with tag-based KASAN enabled
reserving not enough size (Peter Collingbourne)
- Fix BPF verifier do_misc_fixups patching for inlining of the
bpf_get_branch_snapshot BPF helper (Andrii Nakryiko)
- Fix a BPF verifier bug and reject BPF program write attempts into
read-only marked BPF maps (Daniel Borkmann)
- Fix perf_event_detach_bpf_prog error handling by removing an invalid
check which would skip BPF program release (Jiri Olsa)
- Fix memory leak when parsing mount options for the BPF filesystem
(Hou Tao)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Check validity of link->type in bpf_link_show_fdinfo()
bpf: Add the missing BPF_LINK_TYPE invocation for sockmap
bpf: fix do_misc_fixups() for bpf_get_branch_snapshot()
bpf,perf: Fix perf_event_detach_bpf_prog error handling
selftests/bpf: Add test for passing in uninit mtu_len
selftests/bpf: Add test for writes to .rodata
bpf: Remove MEM_UNINIT from skb/xdp MTU helpers
bpf: Fix overloading of MEM_UNINIT's meaning
bpf: Add MEM_WRITE attribute
bpf: Preserve param->string when parsing mount options
bpf, arm64: Fix address emission with tag-based KASAN enabled
Linus Torvalds [Thu, 24 Oct 2024 23:43:50 +0000 (16:43 -0700)]
Merge tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfiler, xfrm and bluetooth.
Oddly this includes a fix for a posix clock regression; in our
previous PR we included a change there as a pre-requisite for
networking one. That fix proved to be buggy and requires the follow-up
included here. Thomas suggested we should send it, given we sent the
buggy patch.
Current release - regressions:
- posix-clock: Fix unbalanced locking in pc_clock_settime()
- netfilter: fix typo causing some targets not to load on IPv6
Current release - new code bugs:
- xfrm: policy: remove last remnants of pernet inexact list
Previous releases - regressions:
- core: fix races in netdev_tx_sent_queue()/dev_watchdog()
- bluetooth: fix UAF on sco_sock_timeout
- eth: hv_netvsc: fix VF namespace also in synthetic NIC
NETDEV_REGISTER event
- eth: usbnet: fix name regression
- eth: be2net: fix potential memory leak in be_xmit()
- eth: plip: fix transmit path breakage
Previous releases - always broken:
- sched: deny mismatched skip_sw/skip_hw flags for actions created by
classifiers
- netfilter: bpf: must hold reference on net namespace
- eth: virtio_net: fix integer overflow in stats
- eth: bnxt_en: replace ptp_lock with irqsave variant
- eth: octeon_ep: add SKB allocation failures handling in
__octep_oq_process_rx()
Misc:
- MAINTAINERS: add Simon as an official reviewer"
* tag 'net-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
net: dsa: mv88e6xxx: support 4000ps cycle counter period
net: dsa: mv88e6xxx: read cycle counter period from hardware
net: dsa: mv88e6xxx: group cycle counter coefficients
net: usb: qmi_wwan: add Fibocom FG132 0x0112 composition
hv_netvsc: Fix VF namespace also in synthetic NIC NETDEV_REGISTER event
net: dsa: microchip: disable EEE for KSZ879x/KSZ877x/KSZ876x
Bluetooth: ISO: Fix UAF on iso_sock_timeout
Bluetooth: SCO: Fix UAF on sco_sock_timeout
Bluetooth: hci_core: Disable works on hci_unregister_dev
posix-clock: posix-clock: Fix unbalanced locking in pc_clock_settime()
r8169: avoid unsolicited interrupts
net: sched: use RCU read-side critical section in taprio_dump()
net: sched: fix use-after-free in taprio_change()
net/sched: act_api: deny mismatched skip_sw/skip_hw flags for actions created by classifiers
net: usb: usbnet: fix name regression
mlxsw: spectrum_router: fix xa_store() error checking
virtio_net: fix integer overflow in stats
net: fix races in netdev_tx_sent_queue()/dev_watchdog()
net: wwan: fix global oob in wwan_rtnl_policy
netfilter: xtables: fix typo causing some targets not to load on IPv6
...
David Woodhouse [Sat, 19 Oct 2024 17:15:44 +0000 (18:15 +0100)]
KVM: arm64: Add support for PSCI v1.2 and v1.3
As with PSCI v1.1 in commit 512865d83fd9 ("KVM: arm64: Bump guest PSCI
version to 1.1"), expose v1.3 to the guest by default. The SYSTEM_OFF2
call which is exposed by doing so is compatible for userspace because
it's just a new flag in the event that KVM raises, in precisely the same
way that SYSTEM_RESET2 was compatible when v1.1 was enabled by default.
David Woodhouse [Sat, 19 Oct 2024 17:15:43 +0000 (18:15 +0100)]
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
The PSCI v1.3 specification adds support for a SYSTEM_OFF2 function
which is analogous to ACPI S4 state. This will allow hosting
environments to determine that a guest is hibernated rather than just
powered off, and ensure that they preserve the virtual environment
appropriately to allow the guest to resume safely (or bump the
hardware_signature in the FACS to trigger a clean reboot instead).
This feature is safe to enable unconditionally (in a subsequent commit)
because it is exposed to userspace through the existing
KVM_SYSTEM_EVENT_SHUTDOWN event, just with an additional flag which
userspace can use to know that the instance intended hibernation instead
of a plain power-off.
As with SYSTEM_RESET2, there is only one type available (in this case
HIBERNATE_OFF), and it is not explicitly reported to userspace through
the event; userspace can get it from the registers if it cares).
Linus Torvalds [Thu, 24 Oct 2024 23:31:58 +0000 (16:31 -0700)]
Merge tag 'hid-for-linus-20241024' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
"Device-specific functionality quirks for Thinkpad X1 Gen3, Logitech
Bolt and some Goodix touchpads (Bartłomiej Maryńczak, Hans de Goede
and Kenneth Albanowski)"
* tag 'hid-for-linus-20241024' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: lenovo: Add support for Thinkpad X1 Tablet Gen 3 keyboard
HID: multitouch: Add quirk for Logitech Bolt receiver w/ Casa touchpad
HID: i2c-hid: Delayed i2c resume wakeup for 0x0d42 Goodix touchpad
David Woodhouse [Sat, 19 Oct 2024 17:15:42 +0000 (18:15 +0100)]
firmware/psci: Add definitions for PSCI v1.3 specification
The v1.3 PSCI spec (https://developer.arm.com/documentation/den0022) adds
the SYSTEM_OFF2 function. Add definitions for it and its hibernation type
parameter.
This code simplification introduced significant regressions on servers
that do not remap inode numbers when exporting multiple underlying
filesystems with colliding inodes, as can be illustrated with simple
tmpfs exports in qemu with remapping disabled:
```
# host side
cd /tmp/linux-test
mkdir m1 m2
mount -t tmpfs tmpfs m1
mount -t tmpfs tmpfs m2
mkdir m1/dir m2/dir
echo foo > m1/dir/foo
echo bar > m2/dir/bar
# guest side
# started with -virtfs local,path=/tmp/linux-test,mount_tag=tmp,security_model=mapped-file
mount -t 9p -o trans=virtio,debug=1 tmp /mnt/t
ls /mnt/t/m1/dir
# foo
ls /mnt/t/m2/dir
# bar (works ok if directry isn't open)
# cd to keep first dir's inode alive
cd /mnt/t/m1/dir
ls /mnt/t/m2/dir
# foo (should be bar)
```
Other examples can be crafted with regular files with fscache enabled,
in which case I/Os just happen to the wrong file leading to
corruptions, or guest failing to boot with:
| VFS: Lookup of 'com.android.runtime' in 9p 9p would have caused loop
In theory, we'd want the servers to be smart enough and ensure they
never send us two different files with the same 'qid.path', but while
qemu has an option to remap that is recommended (and qemu prints a
warning if this case happens), there are many other servers which do
not (kvmtool, nfs-ganesha, probably diod...), we should at least ensure
we don't cause regressions on this:
- assume servers can't be trusted and operations that should get a 'new'
inode properly do so. commit d05dcfdf5e16 (" fs/9p: mitigate inode
collisions") attempted to do this, but v9fs_fid_iget_dotl() was not
called so some higher level of caching got in the way; this needs to be
fixed properly before we can re-apply the patches.
- if we ever want to really simplify this code, we will need to add some
negotiation with the server at mount time where the server could claim
they handle this properly, at which point we could optimize this out.
(but that might not be needed at all if we properly handle the 'new'
check?)
Linus Torvalds [Thu, 24 Oct 2024 21:17:34 +0000 (14:17 -0700)]
Merge tag 'loongarch-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Get correct cores_per_package for SMT systems, enable IRQ if do_ale()
triggered in irq-enabled context, and fix some bugs about vDSO, memory
managenent, hrtimer in KVM, etc"
* tag 'loongarch-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Mark hrtimer to expire in hard interrupt context
LoongArch: Make KASAN usable for variable cpu_vabits
LoongArch: Set initial pte entry with PAGE_GLOBAL for kernel space
LoongArch: Don't crash in stack_top() for tasks without vDSO
LoongArch: Set correct size for vDSO code mapping
LoongArch: Enable IRQ if do_ale() triggered in irq-enabled context
LoongArch: Get correct cores_per_package for SMT systems
LoongArch: Use "Exception return address" to comment ERA
Linus Torvalds [Thu, 24 Oct 2024 20:51:58 +0000 (13:51 -0700)]
Merge tag 'probes-fixes-v6.12-rc4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixes from Masami Hiramatsu:
- objpool: Fix choosing allocation for percpu slots
Fixes to allocate objpool's percpu slots correctly according to the
GFP flag. It checks whether "any bit" in GFP_ATOMIC is set to choose
the vmalloc source, but it should check "all bits" in GFP_ATOMIC flag
is set, because GFP_ATOMIC is a combined flag.
If more than MAX_TRACE_ARGS are passed for creating a probe event,
the entries over MAX_TRACE_ARG in trace_arg array are not
initialized. Thus if the kernel accesses those entries, it crashes.
This rejects creating event if the number of arguments is over
MAX_TRACE_ARGS.
- tracing: Consider the NUL character when validating the event length
A strlen() is used when parsing the event name, and the original code
does not consider the terminal null byte. Thus it can pass the name
one byte longer than the buffer. This fixes to check it correctly.
* tag 'probes-fixes-v6.12-rc4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Consider the NULL character when validating the event length
tracing/probes: Fix MAX_TRACE_ARGS limit handling
objpool: fix choosing allocation for percpu slots
Linus Torvalds [Thu, 24 Oct 2024 20:04:15 +0000 (13:04 -0700)]
Merge tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- mount option fixes:
- fix handling of compression mount options on remount
- reject rw remount in case there are options that don't work
in read-write mode (like rescue options)
- fix zone accounting of unusable space
- fix in-memory corruption when merging extent maps
- fix delalloc range locking for sector < page
- use more convenient default value of drop subtree threshold, clean
more subvolumes without the fallback to marking quotas inconsistent
- fix smatch warning about incorrect value passed to ERR_PTR
* tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix passing 0 to ERR_PTR in btrfs_search_dir_index_item()
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
btrfs: fix read corruption due to race with extent map merging
btrfs: fix the delalloc range locking if sector size < page size
btrfs: qgroup: set a more sane default value for subtree drop threshold
btrfs: clear force-compress on remount when compress mount option is given
btrfs: zoned: fix zone unusable accounting for freed reserved extent
Linus Torvalds [Thu, 24 Oct 2024 19:38:59 +0000 (12:38 -0700)]
Merge tag 'bcachefs-2024-10-22' of https://github.com/koverstreet/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Lots of hotfixes:
- transaction restart injection has been shaking out a few things
- fix a data corruption in the buffered write path on -ENOSPC, found
by xfstests generic/299
- Some small show_options fixes
- Repair mismatches in inode hash type, seed: different snapshot
versions of an inode must have the same hash/type seed, used for
directory entries and xattrs. We were checking the hash seed, but
not the type, and a user contributed a filesystem where the hash
type on one inode had somehow been flipped; these fixes allow his
filesystem to repair.
Additionally, the hash type flip made some directory entries
invisible, which were then recreated by userspace; so the hash
check code now checks for duplicate non dangling dirents, and
renames one of them if necessary.
- Don't use wait_event_interruptible() in recovery: this fixes some
filesystems failing to mount with -ERESTARTSYS
- Workaround for kvmalloc not supporting > INT_MAX allocations,
causing an -ENOMEM when allocating the sorted array of journal
keys: this allows a 75 TB filesystem to mount
- Make sure bch_inode_unpacked.bi_snapshot is set in the old inode
compat path: this alllows Marcin's filesystem (in use since before
6.7) to repair and mount"
* tag 'bcachefs-2024-10-22' of https://github.com/koverstreet/bcachefs: (26 commits)
bcachefs: Set bch_inode_unpacked.bi_snapshot in old inode path
bcachefs: Mark more errors as AUTOFIX
bcachefs: Workaround for kvmalloc() not supporting > INT_MAX allocations
bcachefs: Don't use wait_event_interruptible() in recovery
bcachefs: Fix __bch2_fsck_err() warning
bcachefs: fsck: Improve hash_check_key()
bcachefs: bch2_hash_set_or_get_in_snapshot()
bcachefs: Repair mismatches in inode hash seed, type
bcachefs: Add hash seed, type to inode_to_text()
bcachefs: INODE_STR_HASH() for bch_inode_unpacked
bcachefs: Run in-kernel offline fsck without ratelimit errors
bcachefs: skip mount option handle for empty string.
bcachefs: fix incorrect show_options results
bcachefs: Fix data corruption on -ENOSPC in buffered write path
bcachefs: bch2_folio_reservation_get_partial() is now better behaved
bcachefs: fix disk reservation accounting in bch2_folio_reservation_get()
bcachefS: ec: fix data type on stripe deletion
bcachefs: Don't use commit_do() unnecessarily
bcachefs: handle restarts in bch2_bucket_io_time_reset()
bcachefs: fix restart handling in __bch2_resume_logged_op_finsert()
...
Nirmoy Das [Tue, 22 Oct 2024 10:35:55 +0000 (12:35 +0200)]
drm/xe: Don't restart parallel queues multiple times on GT reset
In case of parallel submissions multiple GuC id will point to the
same exec queue and on GT reset such exec queues will get restarted
multiple times which is not desirable.
v2: don't use exec_queue_enabled() which could race,
do the same for xe_guc_submit_stop (Matt B)
projects / thirdparty / linux.git / log
