MEDIUM: server: Inherit CLI weight changes and agent-check weight responses
When agent-check or CLI command executes relative weight change this patch
propagates it to tracking server allowing grouping many backends running on
same server underneath. Additionaly in case with many src IPs many backends
can have shared state checker, so there won't be unnecessary health checks.
[wt: Note: this will induce some behaviour change on some setups]
BUG/MINOR: config: missing goto out after parsing an incorrect ACL character
The error doesn't prevent checking for other errors after an invalid
character was detected in an ACL name. Better quit ASAP to avoid risking
to emit garbled and confusing error messages if something else fails on
the same line.
BUILD/MINOR: tools: fix build warning in debug_hexdump()
Commit 0ebb511 ("MINOR: tools: add a generic hexdump function for debugging")
introduced debug_hexdump() which is used to dump a memory area during
debugging sessions. This function can start at an unaligned offset and
uses a signed comparison to know where to start dumping from. But the
operation mixes signed and unsigned, making the test incorrect and causing
the following warnings to be emitted under Clang :
src/standard.c:3775:14: warning: comparison of unsigned expression >= 0 is
always true [-Wtautological-compare]
if (b + j >= 0 && b + j < len)
~~~~~ ^ ~
Make "j" signed instead. At the moment this function is not used at all
so there's no impact. Thanks to Dmitry Sivachenko for reporting it. No
backport is needed.
BUILD/MINOR: stats: remove unexpected argument to stats_dump_json_header()
Commit 05ee213 ("MEDIUM: stats: Add JSON output option to show (info|stat)")
used to pass argument "uri" to the aforementionned function which doesn't
take any. It's probably a leftover from multiple iterations of the same
patchset. Spotted by Dmitry Sivachenko. No backport is needed.
David Carlier [Fri, 7 Apr 2017 19:48:00 +0000 (20:48 +0100)]
BUG/MINOR: server : no transparent proxy for DragonflyBSD
IP*_BINDANY is not defined under this system thus it is
necessary to make those fields access since CONFIG_HAP_TRANSPARENT
is not defined.
[wt: problem introduced late in 1.8-dev. The same fix was also reported
by Steven Davidovitz]
MINOR server: Restrict dynamic cookie check to the same proxy.
Each time we generate a dynamic cookie, we try to make sure the same
cookie hasn't been generated for another server, it's very unlikely, but
it may happen.
We only have to check that for the servers in the same proxy, no, need to
check in others, plus the code was buggy and would always check in the
first proxy of the proxy list.
Released version 1.8-dev1 with the following main changes :
- BUG/MEDIUM: proxy: return "none" and "unknown" for unknown LB algos
- BUG/MINOR: stats: make field_str() return an empty string on NULL
- DOC: Spelling fixes
- BUG/MEDIUM: http: Fix tunnel mode when the CONNECT method is used
- BUG/MINOR: http: Keep the same behavior between 1.6 and 1.7 for tunneled txn
- BUG/MINOR: filters: Protect args in macros HAS_DATA_FILTERS and IS_DATA_FILTER
- BUG/MINOR: filters: Invert evaluation order of HTTP_XFER_BODY and XFER_DATA analyzers
- BUG/MINOR: http: Call XFER_DATA analyzer when HTTP txn is switched in tunnel mode
- BUG/MAJOR: stream: fix session abort on resource shortage
- OPTIM: stream-int: don't disable polling anymore on DONT_READ
- BUG/MINOR: cli: allow the backslash to be escaped on the CLI
- BUG/MEDIUM: cli: fix "show stat resolvers" and "show tls-keys"
- DOC: Fix map table's format
- DOC: Added 51Degrees conv and fetch functions to documentation.
- BUG/MINOR: http: don't send an extra CRLF after a Set-Cookie in a redirect
- DOC: mention that req_tot is for both frontends and backends
- BUG/MEDIUM: variables: some variable name can hide another ones
- MINOR: lua: Allow argument for actions
- BUILD: rearrange target files by build time
- CLEANUP: hlua: just indent functions
- MINOR: lua: give HAProxy variable access to the applets
- BUG/MINOR: stats: fix be/sessions/max output in html stats
- MINOR: proxy: Add fe_name/be_name fetchers next to existing fe_id/be_id
- DOC: lua: Documentation about some entry missing
- DOC: lua: Add documentation about variable manipulation from applet
- MINOR: Do not forward the header "Expect: 100-continue" when the option http-buffer-request is set
- DOC: Add undocumented argument of the trace filter
- DOC: Fix some typo in SPOE documentation
- MINOR: cli: Remove useless call to bi_putchk
- BUG/MINOR: cli: be sure to always warn the cli applet when input buffer is full
- MINOR: applet: Count number of (active) applets
- MINOR: task: Rename run_queue and run_queue_cur counters
- BUG/MEDIUM: stream: Save unprocessed events for a stream
- BUG/MAJOR: Fix how the list of entities waiting for a buffer is handled
- BUILD/MEDIUM: Fixing the build using LibreSSL
- BUG/MEDIUM: lua: In some case, the return of sample-fetches is ignored (2)
- SCRIPTS: git-show-backports: fix a harmless typo
- SCRIPTS: git-show-backports: add -H to use the hash of the commit message
- BUG/MINOR: stream-int: automatically release SI_FL_WAIT_DATA on SHUTW_NOW
- CLEANUP: applet/lua: create a dedicated ->fcn entry in hlua_cli context
- CLEANUP: applet/table: add an "action" entry in ->table context
- CLEANUP: applet: remove the now unused appctx->private field
- DOC: lua: documentation about time parser functions
- DOC: lua: improve links
- DOC: lua: section declared twice
- MEDIUM: cli: 'show cli sockets' list the CLI sockets
- BUG/MINOR: cli: "show cli sockets" wouldn't list all processes
- BUG/MINOR: cli: "show cli sockets" would always report process 64
- CLEANUP: lua: rename one of the lua appctx union
- BUG/MINOR: lua/cli: bad error message
- MEDIUM: lua: use memory pool for hlua struct in applets
- MINOR: lua/signals: Remove Lua part from signals.
- DOC: cli: show cli sockets
- MINOR: cli: automatically enable a CLI I/O handler when there's no parser
- CLEANUP: memory: remove the now unused cli_parse_show_pools() function
- CLEANUP: applet: group all CLI contexts together
- CLEANUP: stats: move a misplaced stats context initialization
- MINOR: cli: add two general purpose pointers and integers in the CLI struct
- MINOR: appctx/cli: remove the cli_socket entry from the appctx union
- MINOR: appctx/cli: remove the env entry from the appctx union
- MINOR: appctx/cli: remove the "be" entry from the appctx union
- MINOR: appctx/cli: remove the "dns" entry from the appctx union
- MINOR: appctx/cli: remove the "server_state" entry from the appctx union
- MINOR: appctx/cli: remove the "tlskeys" entry from the appctx union
- CONTRIB: tcploop: add limits.h to fix build issue with some compilers
- MINOR/DOC: lua: just precise one thing
- DOC: fix small typo in fe_id (backend instead of frontend)
- BUG/MINOR: Fix the sending function in Lua's cosocket
- BUG/MINOR: lua: memory leak executing tasks
- BUG/MINOR: lua: bad return code
- BUG/MINOR: lua: memleak when Lua/cli fails
- MEDIUM: lua: remove Lua struct from session, and allocate it with memory pools
- CLEANUP: haproxy: statify unexported functions
- MINOR: haproxy: add a registration for build options
- CLEANUP: wurfl: use the build options list to report it
- CLEANUP: 51d: use the build options list to report it
- CLEANUP: da: use the build options list to report it
- CLEANUP: namespaces: use the build options list to report it
- CLEANUP: tcp: use the build options list to report transparent modes
- CLEANUP: lua: use the build options list to report it
- CLEANUP: regex: use the build options list to report the regex type
- CLEANUP: ssl: use the build options list to report the SSL details
- CLEANUP: compression: use the build options list to report the algos
- CLEANUP: auth: use the build options list to report its support
- MINOR: haproxy: add a registration for post-check functions
- CLEANUP: checks: make use of the post-init registration to start checks
- CLEANUP: filters: use the function registration to initialize all proxies
- CLEANUP: wurfl: make use of the late init registration
- CLEANUP: 51d: make use of the late init registration
- CLEANUP: da: make use of the late init registration code
- MINOR: haproxy: add a registration for post-deinit functions
- CLEANUP: wurfl: register the deinit function via the dedicated list
- CLEANUP: 51d: register the deinitialization function
- CLEANUP: da: register the deinitialization function
- CLEANUP: wurfl: move global settings out of the global section
- CLEANUP: 51d: move global settings out of the global section
- CLEANUP: da: move global settings out of the global section
- MINOR: cfgparse: add two new functions to check arguments count
- MINOR: cfgparse: move parsing of "ca-base" and "crt-base" to ssl_sock
- MEDIUM: cfgparse: move all tune.ssl.* keywords to ssl_sock
- MEDIUM: cfgparse: move maxsslconn parsing to ssl_sock
- MINOR: cfgparse: move parsing of ssl-default-{bind,server}-ciphers to ssl_sock
- MEDIUM: cfgparse: move ssl-dh-param-file parsing to ssl_sock
- MEDIUM: compression: move the zlib-specific stuff from global.h to compression.c
- BUG/MEDIUM: ssl: properly reset the reused_sess during a forced handshake
- BUG/MEDIUM: ssl: avoid double free when releasing bind_confs
- BUG/MINOR: stats: fix be/sessions/current out in typed stats
- MINOR: tcp-rules: check that the listener exists before updating its counters
- MEDIUM: spoe: don't create a dummy listener for outgoing connections
- MINOR: listener: move the transport layer pointer to the bind_conf
- MEDIUM: move listener->frontend to bind_conf->frontend
- MEDIUM: ssl: remote the proxy argument from most functions
- MINOR: connection: add a new prepare_bind_conf() entry to xprt_ops
- MEDIUM: ssl_sock: implement ssl_sock_prepare_bind_conf()
- MINOR: connection: add a new destroy_bind_conf() entry to xprt_ops
- MINOR: ssl_sock: implement ssl_sock_destroy_bind_conf()
- MINOR: server: move the use_ssl field out of the ifdef USE_OPENSSL
- MINOR: connection: add a minimal transport layer registration system
- CLEANUP: connection: remove all direct references to raw_sock and ssl_sock
- CLEANUP: connection: unexport raw_sock and ssl_sock
- MINOR: connection: add new prepare_srv()/destroy_srv() entries to xprt_ops
- MINOR: ssl_sock: implement and use prepare_srv()/destroy_srv()
- CLEANUP: ssl: move tlskeys_finalize_config() to a post_check callback
- CLEANUP: ssl: move most ssl-specific global settings to ssl_sock.c
- BUG/MINOR: backend: nbsrv() should return 0 if backend is disabled
- BUG/MEDIUM: ssl: for a handshake when server-side SNI changes
- BUG/MINOR: systemd: potential zombie processes
- DOC: Add timings events schemas
- BUILD: lua: build failed on FreeBSD.
- MINOR: samples: add xx-hash functions
- MEDIUM: regex: pcre2 support
- BUG/MINOR: option prefer-last-server must be ignored in some case
- MINOR: stats: Support "select all" for backend actions
- BUG/MINOR: sample-fetches/stick-tables: bad type for the sample fetches sc*_get_gpt0
- BUG/MAJOR: channel: Fix the definition order of channel analyzers
- BUG/MINOR: http: report real parser state in error captures
- BUILD: scripts: automatically update the branch in version.h when releasing
- MINOR: tools: add a generic hexdump function for debugging
- BUG/MAJOR: http: fix risk of getting invalid reports of bad requests
- MINOR: http: custom status reason.
- MINOR: connection: add sample fetch "fc_rcvd_proxy"
- BUG/MINOR: config: emit a warning if http-reuse is enabled with incompatible options
- BUG/MINOR: tools: fix off-by-one in port size check
- BUG/MEDIUM: server: consider AF_UNSPEC as a valid address family
- MEDIUM: server: split the address and the port into two different fields
- MINOR: tools: make str2sa_range() return the port in a separate argument
- MINOR: server: take the destination port from the port field, not the addr
- MEDIUM: server: disable protocol validations when the server doesn't resolve
- BUG/MEDIUM: tools: do not force an unresolved address to AF_INET:0.0.0.0
- BUG/MINOR: ssl: EVP_PKEY must be freed after X509_get_pubkey usage
- BUG/MINOR: ssl: assert on SSL_set_shutdown with BoringSSL
- MINOR: Use "500 Internal Server Error" for 500 error/status code message.
- MINOR: proto_http.c 502 error txt typo.
- DOC: add deprecation notice to "block"
- MINOR: compression: fix -vv output without zlib/slz
- BUG/MINOR: Reset errno variable before calling strtol(3)
- MINOR: ssl: don't show prefer-server-ciphers output
- OPTIM/MINOR: config: Optimize fullconn automatic computation loading configuration
- BUG/MINOR: stream: Fix how backend-specific analyzers are set on a stream
- MAJOR: ssl: bind configuration per certificat
- MINOR: ssl: add curve suite for ECDHE negotiation
- MINOR: checks: Add agent-addr config directive
- MINOR: cli: Add possiblity to change agent config via CLI/socket
- MINOR: doc: Add docs for agent-addr configuration variable
- MINOR: doc: Add docs for agent-addr and agent-send CLI commands
- BUILD: ssl: fix to build (again) with boringssl
- BUILD: ssl: fix build on OpenSSL 1.0.0
- BUILD: ssl: silence a warning reported for ERR_remove_state()
- BUILD: ssl: eliminate warning with OpenSSL 1.1.0 regarding RAND_pseudo_bytes()
- BUILD: ssl: kill a build warning introduced by BoringSSL compatibility
- BUG/MEDIUM: tcp: don't poll for write when connect() succeeds
- BUG/MINOR: unix: fix connect's polling in case no data are scheduled
- MINOR: server: extend the flags to 32 bits
- BUG/MINOR: lua: Map.end are not reliable because "end" is a reserved keyword
- MINOR: dns: give ability to dns_init_resolvers() to close a socket when requested
- BUG/MAJOR: dns: restart sockets after fork()
- MINOR: chunks: implement a simple dynamic allocator for trash buffers
- BUG/MEDIUM: http: prevent redirect from overwriting a buffer
- BUG/MEDIUM: filters: Do not truncate HTTP response when body length is undefined
- BUG/MEDIUM: http: Prevent replace-header from overwriting a buffer
- BUG/MINOR: http: Return an error when a replace-header rule failed on the response
- BUG/MINOR: sendmail: The return of vsnprintf is not cleanly tested
- BUG/MAJOR: ssl: fix a regression in ssl_sock_shutw()
- BUG/MAJOR: lua segmentation fault when the request is like 'GET ?arg=val HTTP/1.1'
- BUG/MEDIUM: config: reject anything but "if" or "unless" after a use-backend rule
- MINOR: http: don't close when redirect location doesn't start with "/"
- MEDIUM: boringssl: support native multi-cert selection without bundling
- BUG/MEDIUM: ssl: fix verify/ca-file per certificate
- BUG/MEDIUM: ssl: switchctx should not return SSL_TLSEXT_ERR_ALERT_WARNING
- MINOR: ssl: removes SSL_CTX_set_ssl_version call and cleanup CTX creation.
- BUILD: ssl: fix build with -DOPENSSL_NO_DH
- MEDIUM: ssl: add new sample-fetch which captures the cipherlist
- MEDIUM: ssl: remove ssl-options from crt-list
- BUG/MEDIUM: ssl: in bind line, ssl-options after 'crt' are ignored.
- BUG/MINOR: ssl: fix cipherlist captures with sustainable SSL calls
- MINOR: ssl: improved cipherlist captures
- BUG/MINOR: spoe: Fix soft stop handler using a specific id for spoe filters
- BUG/MINOR: spoe: Fix parsing of arguments in spoe-message section
- MAJOR: spoe: Add support of pipelined and asynchronous exchanges with agents
- MINOR: spoe: Add support for pipelining/async capabilities in the SPOA example
- MINOR: spoe: Remove SPOE details from the appctx structure
- MINOR: spoe: Add status code in error variable instead of hardcoded value
- MINOR: spoe: Send a log message when an error occurred during event processing
- MINOR: spoe: Check the scope of sample fetches used in SPOE messages
- MEDIUM: spoe: Be sure to wakeup the good entity waiting for a buffer
- MINOR: spoe: Use the min of all known max_frame_size to encode messages
- MAJOR: spoe: Add support of payload fragmentation in NOTIFY frames
- MINOR: spoe: Add support for fragmentation capability in the SPOA example
- MAJOR: spoe: refactor the filter to clean up the code
- MINOR: spoe: Handle NOTIFY frames cancellation using ABORT bit in ACK frames
- REORG: spoe: Move struct and enum definitions in dedicated header file
- REORG: spoe: Move low-level encoding/decoding functions in dedicated header file
- MINOR: spoe: Improve implementation of the payload fragmentation
- MINOR: spoe: Add support of negation for options in SPOE configuration file
- MINOR: spoe: Add "pipelining" and "async" options in spoe-agent section
- MINOR: spoe: Rely on alertif_too_many_arg during configuration parsing
- MINOR: spoe: Add "send-frag-payload" option in spoe-agent section
- MINOR: spoe: Add "max-frame-size" statement in spoe-agent section
- DOC: spoe: Update SPOE documentation to reflect recent changes
- MINOR: config: warn when some HTTP rules are used in a TCP proxy
- BUG/MEDIUM: ssl: Clear OpenSSL error stack after trying to parse OCSP file
- BUG/MEDIUM: cli: Prevent double free in CLI ACL lookup
- BUG/MINOR: Fix "get map <map> <value>" CLI command
- MINOR: Add nbsrv sample converter
- CLEANUP: Replace repeated code to count usable servers with be_usable_srv()
- MINOR: Add hostname sample fetch
- CLEANUP: Remove comment that's no longer valid
- MEDIUM: http_error_message: txn->status / http_get_status_idx.
- MINOR: http-request tarpit deny_status.
- CLEANUP: http: make http_server_error() not set the status anymore
- MEDIUM: stats: Add JSON output option to show (info|stat)
- MEDIUM: stats: Add show json schema
- BUG/MAJOR: connection: update CO_FL_CONNECTED before calling the data layer
- MINOR: server: Add dynamic session cookies.
- MINOR: cli: Let configure the dynamic cookies from the cli.
- BUG/MINOR: checks: attempt clean shutw for SSL check
- CONTRIB: tcploop: make it build on FreeBSD
- CONTRIB: tcploop: fix time format to silence build warnings
- CONTRIB: tcploop: report action 'K' (kill) in usage message
- CONTRIB: tcploop: fix connect's address length
- CONTRIB: tcploop: use the trash instead of NULL for recv()
- BUG/MEDIUM: listener: do not try to rebind another process' socket
- BUG/MEDIUM server: Fix crash when dynamic is defined, but not key is provided.
- CLEANUP: config: Typo in comment.
- BUG/MEDIUM: filters: Fix channels synchronization in flt_end_analyze
- TESTS: add a test configuration to stress handshake combinations
- BUG/MAJOR: stream-int: do not depend on connection flags to detect connection
- BUG/MEDIUM: connection: ensure to always report the end of handshakes
- MEDIUM: connection: don't test for CO_FL_WAKE_DATA
- CLEANUP: connection: completely remove CO_FL_WAKE_DATA
- BUG: payload: fix payload not retrieving arbitrary lengths
- BUILD: ssl: simplify SSL_CTX_set_ecdh_auto compatibility
- BUILD: ssl: fix OPENSSL_NO_SSL_TRACE for boringssl and libressl
- BUG/MAJOR: http: fix typo in http_apply_redirect_rule
- MINOR: doc: 2.4. Examples should be 2.5. Examples
- BUG/MEDIUM: stream: fix client-fin/server-fin handling
- MINOR: fd: add a new flag HAP_POLL_F_RDHUP to struct poller
- BUG/MINOR: raw_sock: always perfom the last recv if RDHUP is not available
- OPTIM: poll: enable support for POLLRDHUP
- MINOR: kqueue: exclusively rely on the kqueue returned status
- MEDIUM: kqueue: take care of EV_EOF to improve polling status accuracy
- MEDIUM: kqueue: only set FD_POLL_IN when there are pending data
- DOC/MINOR: Fix typos in proxy protocol doc
- DOC: Protocol doc: add checksum, TLV type ranges
- DOC: Protocol doc: add SSL TLVs, rename CHECKSUM
- DOC: Protocol doc: add noop TLV
- MEDIUM: global: add a 'hard-stop-after' option to cap the soft-stop time
- MINOR: dns: improve DNS response parsing to use as many available records as possible
- BUG/MINOR: cfgparse: loop in tracked servers lists not detected by check_config_validity().
- MINOR: server: irrelevant error message with 'default-server' config file keyword.
- MINOR: server: Make 'default-server' support 'backup' keyword.
- MINOR: server: Make 'default-server' support 'check-send-proxy' keyword.
- CLEANUP: server: code alignement.
- MINOR: server: Make 'default-server' support 'non-stick' keyword.
- MINOR: server: Make 'default-server' support 'send-proxy' and 'send-proxy-v2 keywords.
- MINOR: server: Make 'default-server' support 'check-ssl' keyword.
- MINOR: server: Make 'default-server' support 'force-sslv3' and 'force-tlsv1[0-2]' keywords.
- CLEANUP: server: code alignement.
- MINOR: server: Make 'default-server' support 'no-ssl*' and 'no-tlsv*' keywords.
- MINOR: server: Make 'default-server' support 'ssl' keyword.
- MINOR: server: Make 'default-server' support 'send-proxy-v2-ssl*' keywords.
- CLEANUP: server: code alignement.
- MINOR: server: Make 'default-server' support 'verify' keyword.
- MINOR: server: Make 'default-server' support 'verifyhost' setting.
- MINOR: server: Make 'default-server' support 'check' keyword.
- MINOR: server: Make 'default-server' support 'track' setting.
- MINOR: server: Make 'default-server' support 'ca-file', 'crl-file' and 'crt' settings.
- MINOR: server: Make 'default-server' support 'redir' keyword.
- MINOR: server: Make 'default-server' support 'observe' keyword.
- MINOR: server: Make 'default-server' support 'cookie' keyword.
- MINOR: server: Make 'default-server' support 'ciphers' keyword.
- MINOR: server: Make 'default-server' support 'tcp-ut' keyword.
- MINOR: server: Make 'default-server' support 'namespace' keyword.
- MINOR: server: Make 'default-server' support 'source' keyword.
- MINOR: server: Make 'default-server' support 'sni' keyword.
- MINOR: server: Make 'default-server' support 'addr' keyword.
- MINOR: server: Make 'default-server' support 'disabled' keyword.
- MINOR: server: Add 'no-agent-check' server keyword.
- DOC: server: Add docs for "server" and "default-server" new "no-*" and other settings.
- MINOR: doc: fix use-server example (imap vs mail)
- BUG/MEDIUM: tcp: don't require privileges to bind to device
- BUILD: make the release script use shortlog for the final changelog
- BUILD: scripts: fix typo in announce-release error message
- CLEANUP: time: curr_sec_ms doesn't need to be exported
- BUG/MEDIUM: server: Wrong server default CRT filenames initialization.
- BUG/MEDIUM: peers: fix buffer overflow control in intdecode.
- BUG/MEDIUM: buffers: Fix how input/output data are injected into buffers
- BUG/MINOR: http: Fix conditions to clean up a txn and to handle the next request
- CLEANUP: http: Remove channel_congested function
- CLEANUP: buffers: Remove buffer_bounce_realign function
- CLEANUP: buffers: Remove buffer_contig_area and buffer_work_area functions
- MINOR: http: remove useless check on HTTP_MSGF_XFER_LEN for the request
- MINOR: http: Add debug messages when HTTP body analyzers are called
- BUG/MEDIUM: http: Fix blocked HTTP/1.0 responses when compression is enabled
- BUG/MINOR: filters: Don't force the stream's wakeup when we wait in flt_end_analyze
- DOC: fix parenthesis and add missing "Example" tags
- DOC: update the contributing file
- DOC: log-format/tcplog/httplog update
- MINOR: config parsing: add warning when log-format/tcplog/httplog is overriden in "defaults" sections
Jarno Huuskonen [Thu, 30 Mar 2017 06:19:45 +0000 (09:19 +0300)]
DOC: fix parenthesis and add missing "Example" tags
- urlp_val had unbalanced parenthesis / square brackets
- src_clr_gpc0,src_inc_gpc0,sc2_clr_gpc0,sc2_inc_gpc0,ssl_c_sha1 had
examples not tagged as such.
BUG/MINOR: filters: Don't force the stream's wakeup when we wait in flt_end_analyze
In flt_end_analyze, we wait that the anlayze is finished for both the request
and the response. In this case, because of a task_wakeup, some streams can
consume too much CPU to do nothing. So now, this is the filter's responsibility
to know if this wakeup is needed.
BUG/MEDIUM: http: Fix blocked HTTP/1.0 responses when compression is enabled
When the compression filter is enabled, if a HTTP/1.0 response is received (no
content-length and no transfer-encoding), no data are forwarded to the client
because of a bug and the transaction is blocked indefinitly.
The bug comes from the fact we need to synchronize the end of the request and
the response because of the compression filter. This inhibits the infinite
forwarding of data. But for these responses, the compression is not
activated. So the response body is not analyzed. This leads to a deadlock.
The solution is to enable the analyze of the response body in all cases and
handle this one to enable the infinite forwarding. All other cases should
already by handled.
BUG/MINOR: http: Fix conditions to clean up a txn and to handle the next request
To finish a HTTP transaction and to start the new one, we check, among other
things, that there is enough space in the reponse buffer to eventually inject a
message during the parsing of the next request. Because these messages can reach
the maximum buffers size, it is mandatory to have an empty response
buffer. Remaining input data are trimmed during the txn cleanup (in
http_reset_txn), so we just need to check that the output data were flushed.
The current implementation depends on channel_congested, which does check the
reserved area is available. That's not of course good enough. There are other
tests on the reponse buffer is http_wait_for_request. But conditions to move on
are almost the same. So, we can imagine some scenarii where some output data
remaining in the reponse buffer during the request parsing prevent any messages
injection.
To fix this bug, we just wait that output data were flushed before cleaning up
the HTTP txn (ie. s->res.buf->o == 0). In addition, in http_reset_txn we realign
the response buffer (note the buffer is empty at this step).
Thanks to this changes, there is no more need to set CF_EXPECT_MORE on the
response channel in http_end_txn_clean_session. And more important, there is no
more need to check the response buffer state in http_wait_for_request. This
remove a workaround on response analysers to handle HTTP pipelining.
BUG/MEDIUM: buffers: Fix how input/output data are injected into buffers
The function buffer_contig_space is buggy and could lead to pernicious bugs
(never hitted until now, AFAIK). This function should return the number of bytes
that can be written into the buffer at once (without wrapping).
First, this function is used to inject input data (bi_putblk) and to inject
output data (bo_putblk and bo_inject). But there is no context. So it cannot
decide where contiguous space should placed. For input data, it should be after
bi_end(buf) (ie, buf->p + buf->i modulo wrapping calculation). For output data,
it should be after bo_end(buf) (ie, buf->p) and input data are assumed to not
exist (else there is no space at all).
Then, considering we need to inject input data, this function does not always
returns the right value. And when we need to inject output data, we must be sure
to have no input data at all (buf->i == 0), else the result can also be wrong
(but this is the caller responsibility, so everything should be fine here).
The buffer can be in 3 different states:
1) no wrapping
<---- o ----><----- i ----->
+------------+------------+-------------+------------+
| |oooooooooooo|iiiiiiiiiiiii|xxxxxxxxxxxx|
+------------+------------+-------------+------------+
^ <contig_space>
p ^ ^
l r
2) input wrapping
...---> <---- o ----><-------- i -------...
+-----+------------+------------+--------------------+
|iiiii|xxxxxxxxxxxx|oooooooooooo|iiiiiiiiiiiiiiiiiiii|
+-----+------------+------------+--------------------+
<contig_space> ^
^ ^ p
l r
3) output wrapping
...------ o ------><----- i -----> <----...
+------------------+-------------+------------+------+
|oooooooooooooooooo|iiiiiiiiiiiii|xxxxxxxxxxxx|oooooo|
+------------------+-------------+------------+------+
^ <contig_space>
p ^ ^
l r
buffer_contig_space returns (l - r). The cases 1 and 3 are correctly
handled. But for the second case, r is wrong. It points on the buffer's end
(buf->data + buf->size). It should be bo_end(buf) (ie, buf->p - buf->o).
To fix the bug, the function has been splitted. Now, bi_contig_space and
bo_contig_space should be used to know the contiguous space available to insert,
respectively, input data and output data. For bo_contig_space, input data are
assumed to not exist. And the right version is used, depending what we want to
do.
In addition, to clarify the buffer's API, buffer_realign does not return value
anymore. So it has the same API than buffer_slow_realign.
Emeric Brun [Wed, 29 Mar 2017 14:32:53 +0000 (16:32 +0200)]
BUG/MEDIUM: peers: fix buffer overflow control in intdecode.
A buffer overflow could happen if an integer is badly encoded in
the data part of a msg received from a peer. It should not happen
with authenticated peers (the handshake do not use this function).
This patch makes the code of the 'intdecode' function more robust.
It also adds some comments about the intencode function.
BUG/MEDIUM: server: Wrong server default CRT filenames initialization.
This patch fixes a bug which came with 5e57643 commit where server
default CRT filenames were initialized to the same value as server
default CRL filenames.
Willy Tarreau [Mon, 27 Mar 2017 14:22:59 +0000 (16:22 +0200)]
BUG/MEDIUM: tcp: don't require privileges to bind to device
Ankit Malp reported a bug that we've had since binding to devices was
implemented. Haproxy wrongly checks that the process stays privileged
after startup when a binding to a device is specified via the bind
keyword "interface". This is wrong, because after startup we're not
binding any socket anymore, and during startup if there's a permission
issue it will be immediately reported ("permission denied"). More
importantly there's no way around it as the process exits on startup
when facing such an option.
This fix should be backported to 1.7, 1.6 and 1.5.
From now on, all server "settings" including the new ones above are supported by
"default-server" except "id" which is only supported on "server" lines.
MINOR: server: Add 'no-agent-check' server keyword.
This patch adds 'no-agent-check' setting supported both by 'default-server'
and 'server' directives to disable an agent check for a specific server which would
have 'agent-check' set as default value (inherited from 'default-server'
'agent-check' setting), or, on 'default-server' lines, to disable 'agent-check' setting
as default value for any further 'server' declarations.
For instance, provided this configuration:
default-server agent-check
server srv1
server srv2 no-agent-check
server srv3
default-server no-agent-check
server srv4
srv1 and srv3 would have an agent check enabled contrary to srv2 and srv4.
We do not allocate anymore anything when parsing 'default-server' 'agent-check'
setting.
MINOR: server: Make 'default-server' support 'disabled' keyword.
Before this patch, only 'server' directives could support 'disabled' setting.
This patch makes also 'default-server' directives support this setting.
It is used to disable a list of servers declared after a 'defaut-server' directive.
'enabled' new keyword has been added, both supported as 'default-server' and
'server' setting, to enable again a list of servers (so, declared after a
'default-server enabled' directive) or to explicitly enable a specific server declared
after a 'default-server disabled' directive.
For instance provided this configuration:
default-server disabled
server srv1...
server srv2...
server srv3... enabled
server srv4... enabled
srv1 and srv2 are disabled and srv3 and srv4 enabled.
This is equivalent to this configuration:
default-server disabled
server srv1...
server srv2...
default-server enabled
server srv3...
server srv4...
even if it would have been preferable/shorter to declare:
server srv3...
server srv4...
default-server disabled
server srv1...
server srv2...
MINOR: server: Make 'default-server' support 'addr' keyword.
This patch makes 'default-server' support 'addr' setting.
The code which was responsible of parsing 'server' 'addr' setting
has moved from parse_server() to implement a new parser
callable both as 'default-server' and 'server' 'addr' setting parser.
MINOR: server: Make 'default-server' support 'sni' keyword.
This patch makes 'default-server' directives support 'sni' settings.
A field 'sni_expr' has been added to 'struct server' to temporary
stores SNI expressions as strings during both 'default-server' and 'server'
lines parsing. So, to duplicate SNI expressions from 'default-server' 'sni' setting
for new 'server' instances we only have to "strdup" these strings as this is
often done for most of the 'server' settings.
Then, sample expressions are computed calling sample_parse_expr() (only for 'server'
instances).
A new function has been added to produce the same error output as before in case
of any error during 'sni' settings parsing (display_parser_err()).
Should not break anything.
MINOR: server: Make 'default-server' support 'source' keyword.
Before this patch, only 'server' directives could support 'source' setting.
This patch makes also 'default-server' directives support this setting.
To do so, we had to extract the code responsible of parsing 'source' setting
arguments from parse_server() function and make it callable both
as 'default-server' and 'server' 'source' setting parser. So, the code is mostly
the same as before except that before allocating anything for 'struct conn_src'
members, we must free the memory previously allocated.
MINOR: server: Make 'default-server' support 'cookie' keyword.
Before this patch, 'cookie' setting was only supported by 'server' directives.
This patch makes 'default-server' directive also support 'cookie' setting.
Should not break anything.
MINOR: server: Make 'default-server' support 'observe' keyword.
Before this path, 'observe' setting was only supported by 'server' directives.
This patch makes 'default-server' directives also support 'observe' setting.
Should not break anything.
MINOR: server: Make 'default-server' support 'redir' keyword.
Before this patch only 'server' directives could support 'redir' setting.
This patch makes also 'default-server' directives support 'redir' setting.
Should not break anything.
MINOR: server: Make 'default-server' support 'track' setting.
Before this patch only 'server' directives could support 'track' setting.
This patch makes 'default-server' directives also support this setting.
Should not break anything.
MINOR: server: Make 'default-server' support 'check' keyword.
Before this patch 'check' setting was only supported by 'server' directives.
This patch makes also 'default-server' directives support this setting.
A new 'no-check' keyword parser has been implemented to disable this setting both
in 'default-server' and 'server' directives.
Should not break anything.
MINOR: server: Make 'default-server' support 'verifyhost' setting.
This patch makes 'default-server' directive support 'verifyhost' setting.
Note: there was a little memory leak when several 'verifyhost' arguments were
supplied on the same 'server' line.
MINOR: server: Make 'default-server' support 'send-proxy-v2-ssl*' keywords.
This patch makes 'default-server' directive support 'send-proxy-v2-ssl'
(resp. 'send-proxy-v2-ssl-cn') setting.
A new keyword 'no-send-proxy-v2-ssl' (resp. 'no-send-proxy-v2-ssl-cn') has been
added to disable 'send-proxy-v2-ssl' (resp. 'send-proxy-v2-ssl-cn') setting both
in 'server' and 'default-server' directives.
MINOR: server: Make 'default-server' support 'ssl' keyword.
This patch makes 'default-server' directive support 'ssl' setting.
A new keyword 'no-ssl' has been added to disable this setting both
in 'server' and 'default-server' directives.
MINOR: server: Make 'default-server' support 'no-ssl*' and 'no-tlsv*' keywords.
This patch makes 'default-server' directive support 'no-sslv3' (resp. 'no-ssl-reuse',
'no-tlsv10', 'no-tlsv11', 'no-tlsv12', and 'no-tls-tickets') setting.
New keywords 'sslv3' (resp. 'ssl-reuse', 'tlsv10', 'tlsv11', 'tlsv12', and
'tls-no-tickets') have been added to disable these settings both in 'server' and
'default-server' directives.
MINOR: server: Make 'default-server' support 'force-sslv3' and 'force-tlsv1[0-2]' keywords.
This patch makes 'default-server' directive support 'force-sslv3'
and 'force-tlsv1[0-2]' settings.
New keywords 'no-force-sslv3' (resp. 'no-tlsv1[0-2]') have been added
to disable 'force-sslv3' (resp. 'force-tlsv1[0-2]') setting both in 'server' and
'default-server' directives.
MINOR: server: Make 'default-server' support 'check-ssl' keyword.
This patch makes 'default-server' directive support 'check-ssl' setting
to enable SSL for health checks.
A new keyword 'no-check-ssl' has been added to disable this setting both in
'server' and 'default-server' directives.
MINOR: server: Make 'default-server' support 'send-proxy' and 'send-proxy-v2 keywords.
This patch makes 'default-server' directive support 'send-proxy'
(resp. 'send-proxy-v2') setting.
A new keyword 'no-send-proxy' (resp. 'no-send-proxy-v2') has been added
to disable 'send-proxy' (resp. 'send-proxy-v2') setting both in 'server' and
'default-server' directives.
MINOR: server: Make 'default-server' support 'non-stick' keyword.
This patch makes 'default-server' directive support 'non-stick' setting.
A new keyword 'stick' has been added so that to disable
'non-stick' setting both in 'server' and 'default-server' directives.
MINOR: server: Make 'default-server' support 'check-send-proxy' keyword.
This patch makes 'default-server' directive support 'check-send-proxy' setting.
A new keyword 'no-check-send-proxy' has been added so that to disable
'check-send-proxy' setting both in 'server' and 'default-server' directives.
MINOR: server: Make 'default-server' support 'backup' keyword.
At this time, only 'server' supported 'backup' keyword.
This patch makes also 'default-server' directive support this keyword.
A new keyword 'no-backup' has been added so that to disable 'backup' setting
both in 'server' and 'default-server' directives.
For instance, provided the following sequence of directives:
default-server backup
server srv1
server srv2 no-backup
default-server no-backup
server srv3
server srv4 backup
srv1 and srv4 are declared as backup servers,
srv2 and srv3 are declared as non-backup servers.
MINOR: server: irrelevant error message with 'default-server' config file keyword.
There is no reason to emit such an error message:
"'default-server' expects <name> and <addr>[:<port>] as arguments."
if less than two arguments are provided on 'default-server' lines.
This is a 'server' specific error message.
BUG/MINOR: cfgparse: loop in tracked servers lists not detected by check_config_validity().
There is a silly case where a loop is not detected in tracked servers lists:
when a server tracks itself.
Ex:
server srv1 127.0.0.1:8000 track srv1
Well, this never happens and this does not prevent haproxy from working.
But with this next following configuration:
server srv1 127.0.0.1:8000 track srv2
server srv2 127.0.0.1:8000 track srv2
server srv3 127.0.0.1:8000 track srv2
the code in charge of detecting such loops never returns (without any error message).
haproxy becomes stuck in an infinite loop because of this statement found
in check_config_validity():
Again, such a configuration is never accidentally used I guess.
This latter example seems silly, but as several 'default-server' directives may be used
in the same proxy section, and as 'default-server' settings are not resetted each a
new 'default-server' line is created, it will match the following configuration, in the future,
when 'track' setting will be supported by 'default-server':
default-server track srv3
server srv1 127.0.0.1:8000
server srv2 127.0.0.1:8000
.
.
.
default-server check
server srv3 127.0.0.1:8000
(cherry picked from commit 6528fc93d3c065fdac841f24e55cfe9674a67414)
Baptiste [Mon, 26 Dec 2016 22:21:08 +0000 (23:21 +0100)]
MINOR: dns: improve DNS response parsing to use as many available records as possible
A "weakness" exist in the first implementation of the parsing of the DNS
responses: HAProxy always choses the first IP available matching family
preference, or as a failover, the first IP.
It should be good enough, since most DNS servers do round robin on the
records they send back to clients.
That said, some servers does not do proper round robin, or we may be
unlucky too and deliver the same IP to all the servers sharing the same
hostname.
Let's take the simple configuration below:
backend bk
srv s1 www:80 check resolvers R
srv s2 www:80 check resolvers R
The DNS server configured with 2 IPs for 'www'.
If you're unlucky, then HAProxy may apply the same IP to both servers.
Current patch improves this situation by weighting the decision
algorithm to ensure we'll prefer use first an IP found in the response
which is not already affected to any server.
The new algorithm does not guarantee that the chosen IP is healthy,
neither a fair distribution of IPs amongst the servers in the farm,
etc...
It only guarantees that if the DNS server returns many records for a
hostname and that this hostname is being resolved by multiple servers in
the same backend, then we'll use as many records as possible.
If a server fails, HAProxy won't pick up an other record from the
response.
Cyril Bonté [Thu, 23 Mar 2017 21:44:13 +0000 (22:44 +0100)]
MEDIUM: global: add a 'hard-stop-after' option to cap the soft-stop time
When SIGUSR1 is received, haproxy enters in soft-stop and quits when no
connection remains.
It can happen that the instance remains alive for a long time, depending
on timeouts and traffic. This option ensures that soft-stop won't run
for too long.
Example:
global
hard-stop-after 30s # Once in soft-stop, the instance will remain
# alive for at most 30 seconds.
Add SSL-related TLV types PP2_SUBTYPE_SSL_CIPHER,
PP2_SUBTYPE_SSL_SIG_ALG and PP2_SUBTYPE_SSL_KEY_ALG. Rename
PP2_TYPE_CHECKSUM to PP2_TYPE_CRC32C to make it easier to add checksums
using other algorithms. Clarified encoding of the string fields.
Renamed ASCII to US-ASCII as recommended by
https://www.iana.org/assignments/character-sets/character-sets.xhtml.
Add the CRC32c checksum TLV PP2_TYPE_CHECKSUM. Reserve TLV type ranges
CUSTOM, EXPERIMENT and FUTURE. Clarify that only UNSPEC protocol byte is
mandatory to implement on the receiver.
Willy Tarreau [Mon, 13 Mar 2017 19:36:48 +0000 (20:36 +0100)]
MEDIUM: kqueue: take care of EV_EOF to improve polling status accuracy
kevent() always sets EV_EOF with EVFILT_READ to notify of a read shutdown
and EV_EOF with EVFILT_WRITE to notify of a write error. Let's check this
flag to properly update the FD's polled status (FD_POLL_HUP and FD_POLL_ERR
respectively).
It's worth noting that this one can be coupled with a regular read event
to notify about a pending read followed by a shutdown, but for now we only
use this to set the relevant flags (HUP and ERR).
The poller now exhibits the flag HAP_POLL_F_RDHUP to indicate this new
capability.
An improvement may consist in not setting FD_POLL_IN when the "data"
field is null since it normally only reflects the amount of pending
data.
Willy Tarreau [Mon, 13 Mar 2017 19:30:12 +0000 (20:30 +0100)]
MINOR: kqueue: exclusively rely on the kqueue returned status
After commit e852545 ("MEDIUM: polling: centralize polled events processing")
all pollers stopped to explicitly check the FD's polled status, except the
kqueue poller which is constructed a bit differently. It doesn't seem possible
to cause any issue such as missing an event however, but anyway it's better to
definitely get rid of this since the event filter already provides the event
direction.
Willy Tarreau [Mon, 13 Mar 2017 16:14:51 +0000 (17:14 +0100)]
OPTIM: poll: enable support for POLLRDHUP
On Linux since 2.6.17 poll() supports POLLRDHUP to notify of an upcoming
hangup after pending data. Making use of it allows us to avoid a useless
recv() after short responses on keep-alive connections. Note that we
automatically enable the feature once this flag has been met first in a
poll() status. Till now it was only enabled on epoll.
Willy Tarreau [Mon, 13 Mar 2017 11:04:34 +0000 (12:04 +0100)]
BUG/MINOR: raw_sock: always perfom the last recv if RDHUP is not available
Curu Wong reported a case where haproxy used to send RST to a server
after receiving its FIN. The problem is caused by the fact that being
a server connection, its fd is marked with linger_risk=1, and that the
poller didn't report POLLRDHUP, making haproxy unaware of a pending
shutdown that came after the data, so it used to resort to nolinger
for closing.
However when pollers support RDHUP we're pretty certain whether or not
a shutdown comes after the data and we don't need to perform that extra
recv() call.
Similarly when we're dealing with an inbound connection we don't care
and don't want to perform this extra recv after a request for a very
unlikely case, as in any case we'll have to deal with the client-facing
TIME_WAIT socket.
So this patch ensures that only when it's known that there's no risk with
lingering data, as well as in cases where it's known that the poller would
have detected a pending RDHUP, we perform the fd_done_recv() otherwise we
continue, trying a subsequent recv() to try to detect a pending shutdown.
This effectively results in an extra recv() call for keep-alive sockets
connected to a server when POLLRDHUP isn't known to be supported, but
it's the only way to know whether they're still alive or closed.
This fix should be backported to 1.7, 1.6 and 1.5. It relies on the
previous patch bringing support for the HAP_POLL_F_RDHUP flag.
Willy Tarreau [Mon, 13 Mar 2017 10:38:28 +0000 (11:38 +0100)]
MINOR: fd: add a new flag HAP_POLL_F_RDHUP to struct poller
We'll need to differenciate between pollers which can report hangup at
the same time as read (POLL_RDHUP) from the other ones, because only
these ones may benefit from the fd_done_recv() optimization. Epoll has
had support for EPOLLRDHUP since Linux 2.6.17 and has always been used
this way in haproxy, so now we only set the flag once we've observed it
once in a response. It means that some initial requests may try to
perform a second recv() call, but after the first closed connection it
will be enough to know that the second call is not needed anymore.
Later we may extend these flags to designate event-triggered pollers.
Ie timeout server-fin shorter than timeout server, the backend server
sends data, this package is left in the cache of haproxy, the backend
server continue sending fin package, haproxy recv fin package. this
time the session information is as follows:
time the session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=08 age=1s calls=3 rq[f=848000h,i=0,an=00h,rx=14m58s,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=,wx=14m58s,ax=] s0=[7,0h,fd=6,ex=]
s1=[7,18h,fd=7,ex=] exp=14m58s
rp has set the CF_SHUTR state, next, the client sends the fin package,
session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=08 age=38s calls=4 rq[f=84a020h,i=0,an=00h,rx=,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=1m11s,wx=14m21s,ax=] s0=[7,0h,fd=6,ex=]
s1=[9,10h,fd=7,ex=] exp=1m11s
After waiting 90s, session information is as follows:
0x2373470: proto=tcpv4 src=127.0.0.1:39513 fe=fe_api be=node2
srv=def ts=04 age=4m11s calls=718074391 rq[f=84a020h,i=0,an=00h,rx=,wx=,ax=]
rp[f=8004c020h,i=0,an=00h,rx=?,wx=10m49s,ax=] s0=[7,0h,fd=6,ex=]
s1=[9,10h,fd=7,ex=] exp=? run(nice=0)
cpu information:
6899 root 20 0 112224 21408 4260 R 100.0 0.7 3:04.96 haproxy
Buffering is set to ensure that there is data in the haproxy buffer, and haproxy
can receive the fin package, set the CF_SHUTR flag, If the CF_SHUTR flag has been
set, The following code does not clear the timeout message, causing cpu 100%:
stream.c:process_stream:
if (unlikely((res->flags & (CF_SHUTR|CF_READ_TIMEOUT)) == CF_READ_TIMEOUT)) {
if (si_b->flags & SI_FL_NOHALF)
si_b->flags |= SI_FL_NOLINGER;
si_shutr(si_b);
}
If you have closed the read, set the read timeout does not make sense.
With or without cf_shutr, read timeout is set:
After discussion on the mailing list, setting half-closed timeouts the
hard way here doesn't make sense. They should be set only at the moment
the shutdown() is performed. It will also solve a special case which was
already reported of some half-closed timeouts not working when the shutw()
is performed directly at the stream-interface layer (no analyser involved).
Since the stream interface layer cannot know the timeout values, we'll have
to store them directly in the stream interface so that they are used upon
shutw(). This patch does this, fixing the problem.
An easier reproducer to validate the fix is to keep the huge buffer and
shorten all timeouts, then call it under tcploop server and client, and
wait 3 seconds to see haproxy run at 100% CPU :
BUG/MAJOR: http: fix typo in http_apply_redirect_rule
Because of this typo, AN_RES_FLT_END was never called when a redirect rule is
applied on a keep-alive connection. In almost all cases, this bug has no
effect. But, it leads to a memory leak if a redirect is done on a http-response
rule when the HTTP compression is enabled.
Emmanuel Hocdet [Mon, 20 Mar 2017 10:39:57 +0000 (11:39 +0100)]
BUILD: ssl: fix OPENSSL_NO_SSL_TRACE for boringssl and libressl
"sample-fetch which captures the cipherlist" patch introduce #define
do deal with trace functions only available in openssl > 1.0.2.
Add this #define to libressl and boringssl environment.
Thanks to Piotr Kubaj for postponing and testing with libressl.
SSL_CTX_set_ecdh_auto is declared (when present) with #define. A simple #ifdef
avoid to list all cases of ssllibs. It's a placebo in new ssllibs. It's ok with
openssl 1.0.1, 1.0.2, 1.1.0, libressl and boringssl.
Thanks to Piotr Kubaj for postponing and testing with libressl.
BUG: payload: fix payload not retrieving arbitrary lengths
This fixes a regression introduced in d7bdcb874bcb, that removed the
ability to use req.payload(0,0) to read the whole buffer content. The
offending commit is present starting in version 1.6, so the patch
should be backported to versions 1.6 and 1.7.
Willy Tarreau [Sat, 18 Mar 2017 14:39:57 +0000 (15:39 +0100)]
MEDIUM: connection: don't test for CO_FL_WAKE_DATA
This flag is always set when we end up here, for each and every data
layer (idle, stream-interface, checks), and continuing to test it
leaves a big risk of forgetting to set it as happened once already
before 1.5-dev13.
It could make sense to backport this into stable branches as part of
the connection flag fixes, after some cool down period.
Willy Tarreau [Sun, 19 Mar 2017 06:54:28 +0000 (07:54 +0100)]
BUG/MEDIUM: connection: ensure to always report the end of handshakes
Despite the previous commit working fine on all tests, it's still not
sufficient to completely address the problem. If the connection handler
is called with an event validating an L4 connection but some handshakes
remain (eg: accept-proxy), it will still wake the function up, which
will not report the activity, and will not detect a change once the
handshake it complete so it will not notify the ->wake() handler.
In fact the only reason why the ->wake() handler is still called here
is because after dropping the last handshake, we try to call ->recv()
and ->send() in turn and change the flags in order to detect a data
activity. But if for any reason the data layer is not interested in
reading nor writing, it will not get these events.
A cleaner way to address this is to call the ->wake() handler only
on definitive status changes (shut, error), on real data activity,
and on a complete connection setup, measured as CONNECTED with no
more handshake pending.
It could be argued that the handshake flags have to be made part of
the condition to set CO_FL_CONNECTED but that would currently break
a part of the health checks. Also a handshake could appear at any
moment even after a connection is established so we'd lose the
ability to detect a second end of handshake.
For now the situation around CO_FL_CONNECTED is not clean :
- session_accept() only sets CO_FL_CONNECTED if there's no pending
handshake ;
- conn_fd_handler() will set it once L4 and L6 are complete, which
will do what session_accept() above refrained from doing even if
an accept_proxy handshake is still pending ;
- ssl_sock_infocbk() and ssl_sock_handshake() consider that a
handshake performed with CO_FL_CONNECTED set is a renegociation ;
=> they should instead filter on CO_FL_WAIT_L6_CONN
- all ssl_fc_* sample fetch functions wait for CO_FL_CONNECTED before
accepting to fetch information
=> they should also get rid of any pending handshake
- smp_fetch_fc_rcvd_proxy() uses !CO_FL_CONNECTED instead of
CO_FL_ACCEPT_PROXY
- health checks (standard and tcp-checks) don't check for HANDSHAKE
and may report a successful check based on CO_FL_CONNECTED while
not yet done (eg: send buffer full on send_proxy).
This patch aims at solving some of these side effects in a backportable
way before this is reworked in depth :
- we need to call ->wake() to report connection success, measure
connection time, notify that the data layer is ready and update
the data layer after activity ; this has to be done either if
we switch from pending {L4,L6}_CONN to nothing with no handshakes
left, or if we notice some handshakes were pending and are now
done.
- we document that CO_FL_CONNECTED exactly means "L4 connection
setup confirmed at least once, L6 connection setup confirmed
at least once or not necessary, all this regardless of any
possibly remaining handshakes or future L6 negociations".
This patch also renames CO_FL_CONN_STATUS to the more explicit
CO_FL_NOTIFY_DATA, and works around the previous flags trick consiting
in setting an impossible combination of flags to notify the data layer,
by simply clearing the current flags.
This fix should be backported to 1.7, 1.6 and 1.5.
Willy Tarreau [Sat, 18 Mar 2017 16:11:37 +0000 (17:11 +0100)]
BUG/MAJOR: stream-int: do not depend on connection flags to detect connection
Recent fix 7bf3fa3 ("BUG/MAJOR: connection: update CO_FL_CONNECTED before
calling the data layer") marked an end to a fragile situation where the
absence of CO_FL_{CONNECTED,L4,L6}* flags is used to mark the completion
of a connection setup. The problem is that by setting the CO_FL_CONNECTED
flag earlier, we can indeed call the ->wake() function from conn_fd_handler
but the stream-interface's wake function needs to see CO_FL_CONNECTED unset
to detect that a connection has just been established, so if there's no
pending data in the buffer, the connection times out. The other ->wake()
functions (health checks and idle connections) don't do this though.
So instead of trying to detect a subtle change in connection flags,
let's simply rely on the stream-interface's state and validate that the
connection is properly established and that handshakes are completed
before reporting the WRITE_NULL indicating that a pending connection was
just completed.
This patch passed all tests of handshake and non-handshake combinations,
with synchronous and asynchronous connect() and should be safe for backport
to 1.7, 1.6 and 1.5 when the fix above is already present.
Willy Tarreau [Sun, 19 Mar 2017 05:59:29 +0000 (06:59 +0100)]
TESTS: add a test configuration to stress handshake combinations
This config tries to involve the various possible combinations of connection
handshakes, on the accept side and on the connect side. It also produces logs
indicating the handshake time.
May be tested with tcploop as the server, both for TCP and HTTP mode :
- accept new connection
- pause 100ms
- send what looks like an HTTP response
- wait 500ms and close
Starting log server (mainly to check timers) :
$ socat udp-recvfrom:5514,fork -
Starting server :
$ tcploop 8000 L N A W P100 S:"HTTP/1.0 200 OK\r\nConnection: close\r\n\r\n" P500
Testing all combinations with server-speaks-first (tcp) :
$ nc 0 8007
Testing all combinations with client-speaks-first (tcp) :
$ (printf "GET / HTTP/1.0\r\n\r\n";sleep 1) | nc 0 8007
Testing all combinations with client-speaks-first after pause (tcp) :
$ (usleep 0.05 ; printf "GET / HTTP/1.0\r\n\r\n";sleep 1) | nc 0 8007
Testing all combinations with client-speaks-first (http) :
$ (printf "GET / HTTP/1.0\r\n\r\n";sleep 1) | nc 0 8017
Testing all combinations with client-speaks-first after pause (http) :
$ (usleep 0.05 ; printf "GET / HTTP/1.0\r\n\r\n";sleep 1) | nc 0 8017
Same tests must be redone after surrounding connect() in tcp_connect_server()
with fcntl(fd, F_SETFL, 0) and fcntl(fd, F_SETFL, O_NONBLOCK) for sycnhronous
connect().
BUG/MEDIUM: filters: Fix channels synchronization in flt_end_analyze
When a filter is used, there are 2 channel's analyzers to surround all the
others, flt_start_analyze and flt_end_analyze. This is the good place to acquire
and release resources used by filters, when needed. In addition, the last one is
used to synchronize the both channels, especially for HTTP streams. We must wait
that the analyze is finished for the both channels for an HTTP transaction
before restarting it for the next one.
But this part was buggy, leading to unexpected behaviours. First, depending on
which channel ends first, the request or the response can be switch in a
"forward forever" mode. Then, the HTTP transaction can be cleaned up too early,
while a processing is still in progress on a channel.
To fix the bug, the flag CF_FLT_ANALYZE has been added. It is set on channels in
flt_start_analyze and is kept if at least one filter is still analyzing the
channel. So, we can trigger the channel syncrhonization if this flag was removed
on the both channels. In addition, the flag TX_WAIT_CLEANUP has been added on
the transaction to know if the transaction must be cleaned up or not during
channels syncrhonization. This way, we are sure to reset everything once all the
processings are finished.
Willy Tarreau [Wed, 15 Mar 2017 11:47:46 +0000 (12:47 +0100)]
BUG/MEDIUM: listener: do not try to rebind another process' socket
When the "process" setting of a bind line limits the processes a
listening socket is enabled on, a "disable frontend" operation followed
by an "enable frontend" triggers a bug because all declared listeners
are attempted to be bound again regardless of their assigned processes.
This can at minima create new sockets not receiving traffic, and at worst
prevent from re-enabling a frontend if it's bound to a privileged port.
This bug was introduced by commit 1c4b814 ("MEDIUM: listener: support
rebinding during resume()") merged in 1.6-dev1, trying to perform the
bind() before checking the process list instead of after.
Just move the process check before the bind() operation to fix this.
This fix must be backported to 1.7 and 1.6.
Willy Tarreau [Tue, 14 Mar 2017 13:50:52 +0000 (14:50 +0100)]
CONTRIB: tcploop: use the trash instead of NULL for recv()
NULL is Linux-centric and we're not focused on performance here but
portability and reproducibility. Don't use NULL and use the trash
instead. It may lead to multiple recv() calls for large blocks but
as a benefit it will be possible to see the contents with strace.
BUG/MINOR: checks: attempt clean shutw for SSL check
Strict interpretation of TLS can cause SSL sessions to be thrown away
when the socket is shutdown without sending a "close notify", resulting
in each check to go through the complete handshake, eating more CPU on
the servers.
[wt: strictly speaking there's no guarantee that the close notify will
be delivered, it's only best effort, but that may be enough to ensure
that once at least one is received, next checks will be cheaper. This
should be backported to 1.7 and possibly 1.6]
Olivier Houchard [Tue, 14 Mar 2017 19:08:46 +0000 (20:08 +0100)]
MINOR: cli: Let configure the dynamic cookies from the cli.
This adds 3 new commands to the cli :
enable dynamic-cookie backend <backend> that enables dynamic cookies for a
specified backend
disable dynamic-cookie backend <backend> that disables dynamic cookies for a
specified backend
set dynamic-cookie-key backend <backend> that lets one change the dynamic
cookie secret key, for a specified backend.
projects / thirdparty / haproxy.git / log
