Linus Torvalds [Sun, 15 Feb 2026 18:47:59 +0000 (10:47 -0800)]
Merge tag 'docs-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of small, late-arriving documentation fixes"
* tag 'docs-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: toshiba_haps: fix grammar error in SSD warning
Docs/mm: fix typos and grammar in page_tables.rst
Docs/core-api: fix typos in rbtree.rst
docs: clarify wording in programming-language.rst
docs: process: maintainer-pgp-guide: update kernel.org docs link
docs: kdoc_parser: allow __exit in function prototypes
Linus Torvalds [Sun, 15 Feb 2026 18:24:46 +0000 (10:24 -0800)]
Merge tag '9p-for-7.0-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- 9p/xen racy double-free fix
- track 9p RPC waiting time as IO
* tag '9p-for-7.0-rc1' of https://github.com/martinetd/linux:
9p/xen: protect xen_9pfs_front_free against concurrent calls
9p: Track 9P RPC waiting time as IO
wait: Introduce io_wait_event_killable()
Linus Torvalds [Sun, 15 Feb 2026 18:20:37 +0000 (10:20 -0800)]
Merge tag 'tsm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull TSM updates from Dan Williams:
"A couple of updates to the maximum buffer sizes supported for the
configfs-tsm-reports interface.
This interface is a common transport that conveys the varied
architecture specific launch attestation reports for confidential VMs.
- Prepare the configfs-tsm-reports interface for passing larger
attestation evidence blobs for "Device Identifier Composition
Engine" (DICE) and Post Quantum Crypto (PQC)
- Update the tdx-guest driver for DICE evidence (larger certificate
chains and the CBOR Web Token schema)"
* tag 'tsm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
configfs-tsm-report: tdx_guest: Increase Quote buffer size to 128KB
configfs-tsm-report: Increase TSM_REPORT_OUTBLOB_MAX to 16MB
configfs-tsm-report: Document size limits for outblob attributes
Linus Torvalds [Sun, 15 Feb 2026 16:29:26 +0000 (08:29 -0800)]
Merge tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware:
- use a dedicated algorithm for AMD Navi
- replace magic numbers with named constants
- replace min_t() with min() to avoid u8 truncation
- refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
- at24 i2c eeprom:
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
* tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
i2c: imx-lpi2c: fix SMBus block read NACK after byte count
i2c: designware: Remove an unnecessary condition
i2c: designware: Enable mode swapping
i2c: designware: Combine the init functions
i2c: designware: Combine some of the common functions
i2c: designware: Use device_is_compatible() instead of custom approach
dt-bindings: eeprom: at24: Add compatible for Puya P24C128F
drivers/i2c/busses: use min() instead of min_t()
i2c: imx-lpi2c: Add runtime PM support for IRQ and clock management on i.MX8QXP/8QM
i2c: amd-mp2: clean up amd_mp2_find_device()
i2c: designware: Replace magic numbers with named constants
i2c: rtl9300: use of instead of fwnode
i2c: rtl9300: remove const cast
i2c: tegra: remove unused rst
i2c: designware: Remove not-going-to-be-supported code for Baikal SoC
i2c: spacemit: drop useless spaces
i2c: mlxbf: Use HZ_PER_KHZ in the driver
i2c: mlxbf: Remove unused bus speed definitions
i2c: core: Use dev_fwnode()
i2c: core: Replace custom implementation of device_match_fwnode()
...
Linus Torvalds [Sun, 15 Feb 2026 16:24:19 +0000 (08:24 -0800)]
Merge tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for FocalTech FT8112 added to i2c-hid driver
- support for FocalTech FT3518 added to edt-ft5x06 driver
- support for power buttons in TWL603x chips added to twl4030-pwrbutton
driver
- an update to gpio-decoder driver to make it usable on non-OF
platforms and to clean up the code
- an update to synaptics_i2c driver switching it to use managed
resources and a fix to restarting polling after resume
- an update to gpio-keys driver to fall back to getting IRQ from
resources if not specified using other means
- an update to ili210x driver to support polling mode
- a number of input drivers switched to scnprintf() to suppress
truncation warnings
- a number of updates and conversions of device tree bindings to yaml
format
- fixes to spelling in comments and messages in several drivers
- other assorted fixups
* tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU
dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038
Input: apbps2 - fix comment style and typos
Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys
Input: novatek-nvt-ts - drop wake_type check
dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells'
Input: ili210x - add support for polling mode
dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek
Input: appletouch - fix potential race between resume and open
HID: i2c-hid: Add FocalTech FT8112
dt-bindings: input: i2c-hid: Introduce FocalTech FT8112
Input: synaptics_i2c - switch to using managed resources
Input: synaptics_i2c - guard polling restart in resume
Input: gpio_decoder - don't use "proxy" headers
Input: gpio_decoder - make use of the macros from bits.h
Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep()
Input: gpio_decoder - unify messages with help of dev_err_probe()
Input: gpio_decoder - make use of device properties
Input: serio - complete sizeof(*pointer) conversions
Input: wdt87xx_i2c - switch to use dev_err_probe()
...
Linus Torvalds [Sun, 15 Feb 2026 16:18:57 +0000 (08:18 -0800)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
Helge Deller [Sat, 14 Feb 2026 21:16:34 +0000 (22:16 +0100)]
Partly revert "drm/hyperv: Remove reference to hyperv_fb driver"
This partly reverts commit 8f582bcd132c ("drm/hyperv: Remove reference
to hyperv_fb driver") which was messed up by me while trying to fix a
merge conflict.
Linus Torvalds [Sat, 14 Feb 2026 20:47:15 +0000 (12:47 -0800)]
Merge tag 'loongarch-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Select HAVE_CMPXCHG_{LOCAL,DOUBLE}
- Add 128-bit atomic cmpxchg support
- Add HOTPLUG_SMT implementation
- Wire up memfd_secret system call
- Fix boot errors and unwind errors for KASAN
- Use BPF prog pack allocator and add BPF arena support
- Update dts files to add nand controllers
- Some bug fixes and other small changes
* tag 'loongarch-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: dts: loongson-2k1000: Add nand controller support
LoongArch: dts: loongson-2k0500: Add nand controller support
LoongArch: BPF: Implement bpf_addr_space_cast instruction
LoongArch: BPF: Implement PROBE_MEM32 pseudo instructions
LoongArch: BPF: Use BPF prog pack allocator
LoongArch: Use IS_ERR_PCPU() macro for KGDB
LoongArch: Rework KASAN initialization for PTW-enabled systems
LoongArch: Disable instrumentation for setup_ptwalker()
LoongArch: Remove some extern variables in source files
LoongArch: Guard percpu handler under !CONFIG_PREEMPT_RT
LoongArch: Handle percpu handler address for ORC unwinder
LoongArch: Use %px to print unmodified unwinding address
LoongArch: Prefer top-down allocation after arch_mem_init()
LoongArch: Add HOTPLUG_SMT implementation
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
LoongArch: Wire up memfd_secret system call
LoongArch: Replace seq_printf() with seq_puts() for simple strings
LoongArch: Add 128-bit atomic cmpxchg support
LoongArch: Add detection for SC.Q support
LoongArch: Select HAVE_CMPXCHG_LOCAL in Kconfig
Linus Torvalds [Sat, 14 Feb 2026 20:39:34 +0000 (12:39 -0800)]
Merge tag 'memblock-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- update tools/include/linux/mm.h to fix memblock tests compilation
- drop redundant struct page* parameter from memblock_free_pages() and
get struct page from the pfn
- add underflow detection for size calculation in memtest and warn
about underflow when VM_DEBUG is enabled
* tag 'memblock-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm/memtest: add underflow detection for size calculation
memblock: drop redundant 'struct page *' argument from memblock_free_pages()
memblock test: include <linux/sizes.h> from tools mm.h stub
Linus Torvalds [Sat, 14 Feb 2026 19:54:12 +0000 (11:54 -0800)]
Merge tag 'fbdev-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"It's now easily possible to replace the framebuffer penguin boot logo
with an own logo at compile time (Vincent Mailhol)
The hyperv framebuffer driver has been removed, since the hyperv DRM
driver now seems to provide equal functionality.
Various console_conditional_schedule() calls across the console
drivers (fbcon, printk, vt) have been removed since they are no longer
necessary.
All other patches are either fixes in au1100fb, au1200fb, ffb, rivafb,
vt8500lcdfb and of_display_timing, or minor cleanups in the fbcon and
omapfb drivers"
* tag 'fbdev-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (32 commits)
fbcon: Declare struct fb_info.fbcon_par as of type struct fbcon_par
fbcon: Remove struct fbcon_display.inverse
fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe()
fbdev: ffb: fix corrupted video output on Sun FFB1
fbdev: of_display_timing: Fix device node reference leak in of_get_display_timings()
staging: fbtft: Make framebuffer registration message debug-only
staging: fbtft: Fix build failure when CONFIG_FB_DEVICE=n
fbdev: au1100fb: Check return value of clk_enable() in .resume()
printk, vt, fbcon: Remove console_conditional_schedule()
fbdev: fix fb_pad_unaligned_buffer mask
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
fbdev: vt8500lcdfb: fix missing dma_free_coherent()
video/logo: don't select LOGO_LINUX_MONO and LOGO_LINUX_VGA16 by default
video/logo: move logo selection logic to Kconfig
video/logo: remove logo_mac_clut224
sh: defconfig: remove CONFIG_LOGO_SUPERH_*
newport_con: depend on LOGO_LINUX_CLUT224 instead of LOGO_SGI_CLUT224
video/logo: allow custom logo
video/logo: add a type parameter to the logo makefile function
video/logo: remove orphan .pgm Makefile rule
...
Linus Torvalds [Sat, 14 Feb 2026 19:30:05 +0000 (11:30 -0800)]
Merge tag 'caps-pr-20260213' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities updates from Serge Hallyn:
- add KUnit tests for some core capabilities helpers
- avoid emitting IPC audit messages when there's not
actually a permission being denied
* tag 'caps-pr-20260213' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
ipc: don't audit capability check in ipc_permissions()
security: Add KUnit tests for kuid_root_in_ns and vfsuid_root_in_currentns
Linus Torvalds [Sat, 14 Feb 2026 19:20:26 +0000 (11:20 -0800)]
Merge tag 'rpmsg-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Fix a race in rpmsg driver_override_show() and use the existing
helper to implement the store()
- Implement support for EPOLLOUT in the virtio rpmsg driver
* tag 'rpmsg-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: core: fix race in driver_override_show() and use core helper
rpmsg: virtio: EPOLLOUT support
Linus Torvalds [Sat, 14 Feb 2026 19:17:54 +0000 (11:17 -0800)]
Merge tag 'rproc-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Fix a memory remapping issue and make a few life-cycle improvements
in the i.MX HiFi remoteproc driver
- Add support the System Manager CPU and LMM APIs and use this to
support i.MX95
- Rework the handling of the Mediatek SCP clock to avoid a potential
circular deadlock in the clock providers
- Refactor the Qualcomm secure-world helpers and add support in the
Qualcomm PAS remoteproc driver for reading a resource-table from
secure world. Use this to configure the IOMMU on newer targets where
Linux runs in EL2
* tag 'rproc-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
remoteproc: mediatek: Break lock dependency to `prepare_lock`
remoteproc: imx_rproc: Add support for i.MX95
remoteproc: imx_rproc: Add support for System Manager CPU API
remoteproc: imx_rproc: Add support for System Manager LMM API
remoteproc: imx_rproc: Introduce prepare ops for imx_rproc_dcfg
remoteproc: imx_rproc: Add runtime ops copy to support dynamic behavior
dt-bindings: remoteproc: fsl,imx-rproc: Add support for i.MX95
dt-bindings: remoteproc: Add HSM M4F core on TI K3 SoCs
remoteproc: xlnx_r5: Simplify with scoped for each OF child loop
remoteproc: mtk_scp: Simplify with scoped for each OF child loop
remoteproc: imx_dsp_rproc: Only reset carveout memory at RPROC_OFFLINE state
dt-bindings: remoteproc: qcom,sm8550-pas: Drop SM8750 ADSP from if-branch
dt-bindings: remoteproc: qcom,adsp: Allow cx-supply on qcom,sdm845-slpi-pas
remoteproc: imx_dsp_rproc: Fix multiple start/stop operations
remoteproc: imx_rproc: Use strstarts for "rsc-table" check
remoteproc: imx_dsp_rproc: Wait for suspend ACK only if WAIT_FW_CONFIRMATION is set
remoteproc: imx_dsp_rproc: Rename macro to reflect multiple contexts
remoteproc: imx_dsp_rproc: Skip RP_MBOX_SUSPEND_SYSTEM when mailbox TX channel is uninitialized
dt-bindings: remoteproc: Fix dead link to Keystone DSP GPIO binding
Linus Torvalds [Sat, 14 Feb 2026 19:13:32 +0000 (11:13 -0800)]
Merge tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Platform and core updates
PCC:
- Updates to transmission and interrupt handling, including dynamic
txdone configuration, ->last_tx_done() wiring, and SHMEM
initialization fixes. Reverted previous shared buffer patch
MediaTek
- Introduce mtk-vcp-mailbox driver and bindings for MT8196 VCP
- Expand mtk-cmdq for MT8196 with GCE virtualization, mminfra_offset,
and instruction generation data
Spreadtrum (SPRD)
- Add Mailbox Revision 2 support and UMS9230 bindings
- Fix unhandled interrupt masking and TX done delivery flags
Microchip
- Add pic64gx compatibility to MPFS
- Fix out-of-bounds access and smatch warnings in mchp-ipc-sbi
Core & Misc Platform Updates
- Prevent out-of-bounds access in fw_mbox_index_xlate()
- Add bindings for Qualcomm CPUCP (Kaanapali)
- Simplify mtk-cmdq and zynqmp-ipi with scoped OF child iterators
- Consolidate various minor fixes, dead code removal, and typo
corrections across Broadcom, NXP, Samsung, Xilinx, ARM, and core
headers"
* tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (34 commits)
mailbox: sprd: mask interrupts that are not handled
mailbox: sprd: add support for mailbox revision 2
mailbox: sprd: clear delivery flag before handling TX done
dt-bindings: mailbox: sprd: add compatible for UMS9230
mailbox: bcm-ferxrm-mailbox: Use default primary handler
mailbox: Remove mailbox_client.h from controller drivers
mailbox: zynqmp-ipi: Simplify with scoped for each OF child loop
mailbox: mtk-cmdq: Simplify with scoped for each OF child loop
dt-bindings: mailbox: xlnx,zynqmp-ipi-mailbox: Document msg region requirement
mailbox: Improve RISCV_SBI_MPXY_MBOX guidance
mailbox: mchp-ipc-sbi: fix uninitialized symbol and other smatch warnings
mailbox: arm_mhuv3: fix typo in comment
mailbox: cix: fix typo in error message
mailbox: imx: Skip the suspend flag for i.MX7ULP
mailbox: exynos: drop unneeded runtime pointer (pclk)
mailbox: pcc: Remove spurious IRQF_ONESHOT usage
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
...
Linus Torvalds [Sat, 14 Feb 2026 18:50:31 +0000 (10:50 -0800)]
Merge tag 'exfat-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Improve error code handling and four cleanups
- Reduce unnecessary valid_size extension during mmap write to avoid
over-extending writes
- Optimize consecutive FAT entry reads by caching buffer heads in
__exfat_ent_get to significantly reduce sb_bread() calls
- Add multi-cluster (contiguous cluster) support to exfat_get_cluster()
and exfat_map_cluster() for better sequential read performance,
especially on small cluster sizes
* tag 'exfat-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add blank line after declarations
exfat: remove unnecessary else after return statement
exfat: support multi-cluster for exfat_get_cluster
exfat: return the start of next cache in exfat_cache_lookup
exfat: tweak cluster cache to support zero offset
exfat: support multi-cluster for exfat_map_cluster
exfat: remove handling of non-file types in exfat_map_cluster
exfat: reuse cache to improve exfat_get_cluster
exfat: reduce the number of parameters for exfat_get_cluster()
exfat: remove the unreachable warning for cache miss cases
exfat: remove the check for infinite cluster chain loop
exfat: improve exfat_find_last_cluster
exfat: improve exfat_count_num_clusters
exfat: support reuse buffer head for exfat_ent_get
exfat: add cache option for __exfat_ent_get
exfat: reduce unnecessary writes during mmap write
exfat: improve error code handling in exfat_find_empty_entry()
Stephen Boyd [Sat, 14 Feb 2026 18:23:59 +0000 (10:23 -0800)]
Merge branches 'clk-aspeed' and 'clk-qcom' into clk-next
* clk-aspeed:
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
* clk-qcom: (49 commits)
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: qcom: gfx3d: add parent to parent request map
clk: qcom: dispcc-sm7150: Fix dispcc_mdss_pclk1_clk_src
clk: qcom: dispcc-sdm845: Enable parents for pixel clocks
clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()
clk: qcom: regmap-divider: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: qcom: alpha-pll: convert from divider_round_rate() to divider_determine_rate()
clk: qcom: Add support for GPUCC and GXCLK for Kaanapali
clk: qcom: Add support for VideoCC driver for Kaanapali
clk: qcom: camcc: Add support for camera clock controller for Kaanapali
clk: qcom: dispcc: Add support for display clock controller Kaanapali
clk: qcom: clk-alpha-pll: Add support for controlling Pongo EKO_T PLL
clk: qcom: clk-alpha-pll: Update the PLL support for cal_l
clk: qcom: camcc: Add camera clock controller driver for SM8750 SoC
clk: qcom: clk-alpha-pll: Add support for controlling Rivian PLL
dt-bindings: clock: qcom: document the Kaanapali GPU Clock Controller
dt-bindings: clock: qcom: Add Kaanapali video clock controller
dt-bindings: clock: qcom: Add support for CAMCC for Kaanapali
dt-bindings: clock: qcom: document Kaanapali DISPCC clock controller
dt-bindings: clock: qcom: Add camera clock controller for SM8750 SoC
...
Stephen Boyd [Sat, 14 Feb 2026 18:23:51 +0000 (10:23 -0800)]
Merge branches 'clk-imx', 'clk-divider', 'clk-rockchip' and 'clk-microchip' into clk-next
* clk-imx:
clk: imx: fracn-gppll: Add 241.90 MHz Support
clk: imx: fracn-gppll: Add 332.60 MHz Support
* clk-divider:
rtc: ac100: convert from divider_round_rate() to divider_determine_rate()
clk: zynqmp: divider: convert from divider_round_rate() to divider_determine_rate()
clk: x86: cgu: convert from divider_round_rate() to divider_determine_rate()
clk: versaclock3: convert from divider_round_rate() to divider_determine_rate()
clk: stm32: stm32-core: convert from divider_round_rate_parent() to divider_determine_rate()
clk: stm32: stm32-core: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: sprd: div: convert from divider_round_rate() to divider_determine_rate()
clk: sophgo: sg2042-clkgen: convert from divider_round_rate() to divider_determine_rate()
clk: nxp: lpc32xx: convert from divider_round_rate() to divider_determine_rate()
clk: nuvoton: ma35d1-divider: convert from divider_round_rate() to divider_determine_rate()
clk: milbeaut: convert from divider_round_rate() to divider_determine_rate()
clk: milbeaut: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: loongson1: convert from divider_round_rate() to divider_determine_rate()
clk: hisilicon: clkdivider-hi6220: convert from divider_round_rate() to divider_determine_rate()
clk: bm1880: convert from divider_round_rate() to divider_determine_rate()
clk: bm1880: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: actions: owl-divider: convert from divider_round_rate() to divider_determine_rate()
clk: actions: owl-composite: convert from owl_divider_helper_round_rate() to divider_determine_rate()
clk: sunxi-ng: convert from divider_round_rate_parent() to divider_determine_rate()
clk: sophgo: cv18xx-ip: convert from divider_round_rate() to divider_determine_rate()
* clk-rockchip:
clk: rockchip: Fix error pointer check after rockchip_clk_register_gate_link()
* clk-microchip:
dt-bindings: clock: mpfs-clkcfg: Add pic64gx compatibility
dt-bindings: clock: mpfs-ccc: Add pic64gx compatibility
clk: microchip: drop POLARFIRE from ARCH_MICROCHIP_POLARFIRE
clk: microchip: core: remove unused include asm/traps.h
clk: microchip: core: correct return value on *_get_parent()
clk: microchip: core: remove duplicate determine_rate on pic32_sclk_ops
Stephen Boyd [Sat, 14 Feb 2026 18:23:37 +0000 (10:23 -0800)]
Merge branches 'clk-amlogic', 'clk-thead', 'clk-mediatek' and 'clk-samsung' into clk-next
* clk-amlogic:
clk: meson: gxbb: use the existing HHI_HDMI_PLL_CNTL3 macro
clk: meson: g12a: Limit the HDMI PLL OD to /4
clk: meson: gxbb: Limit the HDMI PLL OD to /4 on GXL/GXM SoCs
clk: amlogic: remove potentially unsafe flags from S4 video clocks
clk: amlogic: add video-related clocks for S4 SoC
dt-bindings: clock: add video clock indices for Amlogic S4 SoC
clk: meson: t7: add t7 clock peripherals controller driver
clk: meson: t7: add support for the T7 SoC PLL clock
dt-bindings: clock: add Amlogic T7 peripherals clock controller
dt-bindings: clock: add Amlogic T7 SCMI clock controller
dt-bindings: clock: add Amlogic T7 PLL clock controller
* clk-thead:
clk: thead: th1520-ap: Support CPU frequency scaling
clk: thead: th1520-ap: Add macro to define multiplexers with flags
clk: thead: th1520-ap: Support setting PLL rates
clk: thead: th1520-ap: Add C910 bus clock
clk: thead: th1520-ap: Poll for PLL lock and wait for stability
dt-bindings: clock: thead,th1520-clk-ap: Add ID for C910 bus clock
* clk-mediatek:
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
dt-bindings: clock: mediatek,mt7622-pciesys: Remove syscon compatible
clk: mediatek: Drop __initconst from gates
* clk-samsung:
clk: samsung: gs101: add support for Display Process Unit (DPU) clocks
dt-bindings: samsung: exynos-sysreg: add gs101 dpu compatible
dt-bindings: clock: google,gs101-clock: Add DPU clock management unit
dt-bindings: clock: google,gs101-clock: fix alphanumeric ordering
clk: samsung: fix sysreg save/restore when PM is enabled for CMU
clk: samsung: avoid warning message on legacy Exynos (auto clock gating)
clk: samsung: gs101: Enable auto_clock_gate mode for each gs101 CMU
clk: samsung: Implement automatic clock gating mode for CMUs
dt-bindings: clock: google,gs101-clock: add samsung,sysreg property as required
clk: samsung: exynosautov920: add clock support
dt-bindings: clock: exynosautov920: add MFD clock definitions
Stephen Boyd [Sat, 14 Feb 2026 18:23:04 +0000 (10:23 -0800)]
Merge branches 'clk-renesas', 'clk-cleanup', 'clk-spacemit' and 'clk-tegra' into clk-next
* clk-renesas: (25 commits)
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: renesas: Add missing log message terminators
clk: renesas: rzg2l: Remove DSI clock rate restrictions
clk: renesas: rzv2h: Deassert reset on assert timeout
clk: renesas: rzg2l: Deassert reset on assert timeout
clk: renesas: cpg-mssr: Unlock before reset verification
clk: renesas: r9a09g056: Add entries for CANFD
clk: renesas: r9a09g057: Add entries for CANFD
clk: renesas: r9a09g077: Add CANFD clocks
clk: renesas: cpg-mssr: Handle RZ/T2H register layout in PM callbacks
dt-bindings: clock: renesas,r9a09g077/87: Add PCLKCAN ID
clk: renesas: cpg-mssr: Simplify pointer math in cpg_rzt2h_mstp_read()
clk: renesas: r9a09g056: Add clock and reset entries for TSU
clk: renesas: r9a09g057: Add entries for RSCIs
clk: renesas: r9a09g056: Add entries for RSCIs
clk: renesas: r9a09g056: Add entries for the RSPIs
clk: renesas: r9a09g056: Add entries for ICU
clk: renesas: r9a09g056: Add entries for the DMACs
...
* clk-cleanup:
clk: Disable KUNIT_UML_PCI
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: tegra: tegra124-emc: fix device leak on set_rate()
clk: Annotate #else and #endif
clk: Merge prepare and unprepare sections
clk: Move clk_{save,restore}_context() to COMMON_CLK section
clk: clk-apple-nco: Add "apple,t8103-nco" compatible
clk: versatile: impd1: Simplify with scoped for each OF child loop
clk: scpi: Simplify with scoped for each OF child loop
clk: lmk04832: Simplify with scoped for each OF child loop
* clk-spacemit:
clk: spacemit: k3: add the clock tree
clk: spacemit: k3: extract common header
clk: spacemit: ccu_pll: add plla type clock
clk: spacemit: ccu_mix: add inverted enable gate clock
dt-bindings: soc: spacemit: k3: add clock support
clk: spacemit: add platform SoC prefix to reset name
clk: spacemit: extract common ccu functions
reset: spacemit: fix auxiliary device id
clk: spacemit: prepare common ccu header
clk: spacemit: Hide common clock driver from user controller
clk: spacemit: Respect Kconfig setting when building modules
* clk-tegra:
clk: tegra30: Add CSI pad clock gates
clk: tegra: Set CSUS as vi_sensor's gate for Tegra20, Tegra30 and Tegra114
clk: tegra20: Reparent dsi clock to pll_d_out0
clk: tegra: tegra124-emc: Simplify with scoped for each OF child loop
clk: tegra: Adjust callbacks in tegra_clock_pm
clk: tegra: tegra124-emc: Fix potential memory leak in tegra124_clk_register_emc()
Linus Torvalds [Sat, 14 Feb 2026 17:48:10 +0000 (09:48 -0800)]
Merge tag 'f2fs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this development cycle, we focused on several key performance
optimizations:
- introducing large folio support to enhance read speeds for
immutable files
- reducing checkpoint=enable latency by flushing only committed dirty
pages
- implementing tracepoints to diagnose and resolve lock priority
inversion.
Additionally, we introduced the packed_ssa feature to optimize the SSA
footprint when utilizing large block sizes.
Detail summary:
Enhancements:
- support large folio for immutable non-compressed case
- support non-4KB block size without packed_ssa feature
- optimize f2fs_enable_checkpoint() to avoid long delay
- optimize f2fs_overwrite_io() for f2fs_iomap_begin
- optimize NAT block loading during checkpoint write
- add write latency stats for NAT and SIT blocks in
f2fs_write_checkpoint
- pin files do not require sbi->writepages lock for ordering
- avoid f2fs_map_blocks() for consecutive holes in readpages
- flush plug periodically during GC to maximize readahead effect
- add tracepoints to catch lock overheads
- add several sysfs entries to tune internal lock priorities
Fixes:
- fix lock priority inversion issue
- fix incomplete block usage in compact SSA summaries
- fix to show simulate_lock_timeout correctly
- fix to avoid mapping wrong physical block for swapfile
- fix IS_CHECKPOINTED flag inconsistency issue caused by
concurrent atomic commit and checkpoint writes
- fix to avoid UAF in f2fs_write_end_io()"
* tag 'f2fs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (61 commits)
f2fs: sysfs: introduce critical_task_priority
f2fs: introduce trace_f2fs_priority_update
f2fs: fix lock priority inversion issue
f2fs: optimize f2fs_overwrite_io() for f2fs_iomap_begin
f2fs: fix incomplete block usage in compact SSA summaries
f2fs: decrease maximum flush retry count in f2fs_enable_checkpoint()
f2fs: optimize NAT block loading during checkpoint write
f2fs: change size parameter of __has_cursum_space() to unsigned int
f2fs: add write latency stats for NAT and SIT blocks in f2fs_write_checkpoint
f2fs: pin files do not require sbi->writepages lock for ordering
f2fs: fix to show simulate_lock_timeout correctly
f2fs: introduce FAULT_SKIP_WRITE
f2fs: check skipped write in f2fs_enable_checkpoint()
Revert "f2fs: add timeout in f2fs_enable_checkpoint()"
f2fs: fix to unlock folio in f2fs_read_data_large_folio()
f2fs: fix error path handling in f2fs_read_data_large_folio()
f2fs: use folio_end_read
f2fs: fix to avoid mapping wrong physical block for swapfile
f2fs: avoid f2fs_map_blocks() for consecutive holes in readpages
f2fs: advance index and offset after zeroing in large folio read
...
Min-Hsun Chang [Mon, 9 Feb 2026 14:56:03 +0000 (22:56 +0800)]
Docs/mm: fix typos and grammar in page_tables.rst
Correct several spelling and grammatical errors in the page tables
documentation. This includes:
- Fixing "a address" to "an address"
- Fixing "pfs" to "pfns"
- Correcting the possessive "Torvald's" to "Torvalds's"
- Fixing "instruction that want" to "instruction that wants"
- Fixing "code path" to "code paths"
Signed-off-by: Min-Hsun Chang <chmh0624@gmail.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260209145603.96664-1-chmh0624@gmail.com>
Min-Hsun Chang [Tue, 10 Feb 2026 06:08:29 +0000 (14:08 +0800)]
Docs/core-api: fix typos in rbtree.rst
Correct minor typographical errors in the red-black tree documentation:
- Remove redundant "a" in the cached rbtrees section.
- Fix "updated" to "update" in the augmented rbtrees section.
- Fix "be looking" to "by looking" in the interval tree sample usage.
Signed-off-by: Min-Hsun Chang <chmh0624@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260210060829.42975-1-chmh0624@gmail.com>
fbdev: ffb: fix corrupted video output on Sun FFB1
Fix Sun FFB1 corrupted video out ([1] and [2]) by disabling overlay and
initializing window mode to a known state. The issue never appeared on
my FFB2+/vertical nor Elite3D/M6. It could also depend on the PROM
version.
/SUNW,ffb@1e,0: FFB at 000001fc00000000, type 11, DAC pnum[236c] rev[10] manuf_rev[4]
X (II) /dev/fb0: Detected FFB1, Z-buffer, Single-buffered.
X (II) /dev/fb0: BT9068 (PAC1) ramdac detected (with normal cursor control)
X (II) /dev/fb0: Detected Creator/Creator3D
Felix Gu [Sat, 31 Jan 2026 12:48:33 +0000 (20:48 +0800)]
fbdev: of_display_timing: Fix device node reference leak in of_get_display_timings()
Use for_each_child_of_node_scoped instead of for_each_child_of_node
to ensure automatic of_node_put on early exit paths, preventing
device node reference leak.
Fixes: cc3f414cf2e4 ("video: add of helper for display timings/videomode") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
Chintan Patel [Thu, 22 Jan 2026 03:16:35 +0000 (19:16 -0800)]
staging: fbtft: Make framebuffer registration message debug-only
The framebuffer registration message is informational only and not
useful during normal operation. Convert it to debug-level logging to
keep the driver quiet when working correctly.
Chintan Patel [Thu, 22 Jan 2026 03:16:34 +0000 (19:16 -0800)]
staging: fbtft: Fix build failure when CONFIG_FB_DEVICE=n
When CONFIG_FB_DEVICE is disabled, struct fb_info does
not provide a valid dev pointer. Direct dereferences of
fb_info->dev therefore result in build failures.
Fix this by avoiding direct accesses to fb_info->dev and
switching the affected debug logging to framebuffer helpers
that do not rely on a device pointer.
This fixes the following build failure reported by the
kernel test robot.
Fixes: a06d03f9f238 ("staging: fbtft: Make FB_DEVICE dependency optional") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202601110740.Y9XK5HtN-lkp@intel.com Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Chintan Patel <chintanlike@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
Chen Ni [Thu, 29 Jan 2026 04:07:14 +0000 (12:07 +0800)]
fbdev: au1100fb: Check return value of clk_enable() in .resume()
Check the return value of clk_enable() in au1100fb_drv_resume() and
return the error on failure.
This ensures the system is aware of the resume failure and can track
its state accurately.
do_con_write(), fbcon_redraw.*() invoke console_conditional_schedule()
which is a conditional scheduling point based on printk's internal
variables console_may_schedule. It may only be used if the console lock
is acquired for instance via console_lock() or console_trylock().
Prinkt sets the internal variable to 1 (and allows to schedule)
if the console lock has been acquired via console_lock(). The trylock
does not allow it.
The console_conditional_schedule() invocation in do_con_write() is
invoked shortly before console_unlock().
The console_conditional_schedule() invocation in fbcon_redraw.*()
original from fbcon_scroll() / vt's con_scroll() which originate from a
line feed.
In console_unlock() the variable is set to 0 (forbids to schedule) and
it tries to schedule while making progress printing. This is brand new
compared to when console_conditional_schedule() was added in v2.4.9.11.
In v2.6.38-rc3, console_unlock() (started its existence) iterated over
all consoles and flushed them with disabled interrupts. A scheduling
attempt here was not possible, it relied that a long print scheduled
before console_unlock().
Since commit 8d91f8b15361d ("printk: do cond_resched() between lines
while outputting to consoles"), which appeared in v4.5-rc1,
console_unlock() attempts to schedule if it was allowed to schedule
while during console_lock(). Each record is idealy one line so after
every line feed.
This console_conditional_schedule() is also only relevant on
PREEMPT_NONE and PREEMPT_VOLUNTARY builds. In other configurations
cond_resched() becomes a nop and has no impact.
I'm bringing this all up just proof that it is not required anymore. It
becomes a problem on a PREEMPT_RT build with debug code enabled because
that might_sleep() in cond_resched() remains and triggers a warnings.
This is due to
and vt_console_print() acquires a spinlock_t which does not allow a
voluntary schedule. There is no need to fb_scroll() to schedule since
console_flush_one_record() attempts to schedule after each line.
!PREEMPT_RT is not affected because the legacy printing thread is only
enabled on PREEMPT_RT builds.
Therefore I suggest to remove console_conditional_schedule().
Cc: Simona Vetter <simona@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Fixes: 5f53ca3ff83b4 ("printk: Implement legacy printer kthread for PREEMPT_RT") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Petr Mladek <pmladek@suse.com> # from printk() POV Signed-off-by: Helge Deller <deller@gmx.de>
Weigang He [Fri, 16 Jan 2026 09:57:51 +0000 (09:57 +0000)]
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
of_parse_phandle() returns a device_node with refcount incremented,
which is stored in 'entry' and then copied to 'native_mode'. When the
error paths at lines 184 or 192 jump to 'entryfail', native_mode's
refcount is not decremented, causing a refcount leak.
Fix this by changing the goto target from 'entryfail' to 'timingfail',
which properly calls of_node_put(native_mode) before cleanup.
Fixes: cc3f414cf2e4 ("video: add of helper for display timings/videomode") Cc: stable@vger.kernel.org Signed-off-by: Weigang He <geoffreyhe2@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
Vincent Mailhol [Sat, 10 Jan 2026 12:23:24 +0000 (13:23 +0100)]
video/logo: don't select LOGO_LINUX_MONO and LOGO_LINUX_VGA16 by default
Nowadays, nearly all systems have a color depth of eight or more and
are thus able to display the clut224 logo. This means that the
monochrome and vga16 logos will never be displayed on an average
machine and are thus just a waste of bytes.
Set CONFIG_LOGO_LINUX_MONO and CONFIG_LOGO_LINUX_VGA16 configuration
symbols to no by default.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
Vincent Mailhol [Thu, 8 Jan 2026 19:04:55 +0000 (20:04 +0100)]
video/logo: move logo selection logic to Kconfig
Now that the path to the logo file can be directly entered in Kbuild,
there is no more need to handle all the logo file selection in the
Makefile and the C files.
The only exception is the logo_spe_clut224 which is only used by the
Cell processor (found for example in the Playstation 3) [1]. This
extra logo uses its own different image which shows up on a separate
line just below the normal logo. Because the extra logo uses a
different image, it can not be factorized under the custom logo logic.
Move all the logo file selection logic to Kbuild (except from the
logo_spe_clut224.ppm), this done, clean-up the C code to only leave
one entry for each logo type (monochrome, 16-colors and 224-colors).
Vincent Mailhol [Thu, 8 Jan 2026 19:04:54 +0000 (20:04 +0100)]
video/logo: remove logo_mac_clut224
The logo_mac_clut224 depends on the runtime value MACH_IS_MAC being
true to be displayed. This makes that logo a one-of-a-kind, as it is
the only one whose selection can not be decided at compile time.
This dynamic logo selection logic conflicts with our upcoming plans to
simplify the logo selection code.
Considering that the logo_mac_clut224 is only used by the Macintosh
68k, a machine whose sales ended some thirty years ago and which thus
represents a very small user base, it is preferable to resolve the
conflict in favour of code simplicity.
Remove the logo_mac_clut224 so that the logo selection can be
statically determined at compile time.
The users who wish to continue using that logo can still download it
from [1] and add:
Vincent Mailhol [Thu, 8 Jan 2026 19:04:53 +0000 (20:04 +0100)]
sh: defconfig: remove CONFIG_LOGO_SUPERH_*
CONFIG_LOGO_SUPERH_MONO, CONFIG_LOGO_SUPERH_VGA16 and
CONFIG_LOGO_SUPERH_CLUT224 will be removed in an upcoming change but
are still referenced in some of the defconfig.
Remove all the occurrences of CONFIG_LOGO_SUPERH_*.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
Vincent Mailhol [Thu, 8 Jan 2026 19:04:52 +0000 (20:04 +0100)]
newport_con: depend on LOGO_LINUX_CLUT224 instead of LOGO_SGI_CLUT224
newport_show_logo() is only activated if CONFIG_LOGO_SGI_CLUT224 is
set (otherwise it is a NOP). This configuration item will be removed
in an upcoming change so instead, make it depend on LOGO_LINUX_CLUT224.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
Vincent Mailhol [Thu, 8 Jan 2026 19:04:51 +0000 (20:04 +0100)]
video/logo: allow custom logo
Some people like to replace the default Tux boot logo by an image of
their own. There exist a few tutorials here [1] and there [2]. But
this requires modifying the source tree which is a bit cumbersome.
Add a string entry in Kbuild for each of the logo categories
(monochrome, 16-colors, 224-colors). The string entry takes a path to
a .pbm or .ppm image allowing the user to more easily provide a custom
logo without having to modify the sources.
Add an help entry with a short hint on how to convert images to the
portable pixmap file format.
Update the Makefile accordingly. When converted to .c file, the logo
will have one of these fixed file name:
depending on the image type and this regardless of the name of the
.pgm/.ppm source filename. This will allow for further simplifications
in an upcoming change.
Vincent Mailhol [Thu, 8 Jan 2026 19:04:50 +0000 (20:04 +0100)]
video/logo: add a type parameter to the logo makefile function
When translating a portable pixmap file into a .c file, the pnmtologo
tool expects to receive the image type (either mono, vga16 or clut224)
as an argument under the -t option.
Currently, this information is stored in the file name. Because we
will allow for custom logo in an upcoming change, it is preferable to
decouple the image name from its type.
Add a new $2 parameter to the Makefile logo function which contains
the image type.
Update all the individual targets to provide this new argument.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
Vincent Mailhol [Thu, 8 Jan 2026 19:04:49 +0000 (20:04 +0100)]
video/logo: remove orphan .pgm Makefile rule
The kernel has no actual grey-scale logos. And looking at the git
history, it seems that there never was one (or maybe there was in the
pre-git history? I did not check that far…)
Remove the Makefile rule for the .pgm grey scale images.
Chintan Patel [Wed, 7 Jan 2026 04:42:57 +0000 (20:42 -0800)]
fbdev: sh_mobile_lcdc: Make FB_DEVICE dependency optional
The sh_mobile_lcdc driver exposes overlay configuration via sysfs, but the
core driver does not require CONFIG_FB_DEVICE.
Make overlay sysfs optional so that the driver can build and operate
even when FB_DEVICE is disabled. The kernel naturally ignores the
missing attribute group, preserving buildability and type safety.
Chintan Patel [Wed, 7 Jan 2026 04:42:56 +0000 (20:42 -0800)]
fbdev: omapfb: Make FB_DEVICE dependency optional
omapfb provides several sysfs interfaces for framebuffer configuration
and debugging, but these are not required for the core driver.
Remove the hard dependency on CONFIG_FB_DEVICE and make sysfs support
optional by using dev_of_fbinfo() to obtain the backing device at runtime.
When FB_DEVICE is disabled, sysfs operations are skipped while the code
still builds and is type-checked.
Chintan Patel [Wed, 7 Jan 2026 04:42:55 +0000 (20:42 -0800)]
staging: fbtft: Make FB_DEVICE dependency optional
fbtft provides sysfs interfaces for debugging and gamma configuration,
but these are not required for the core driver.
Drop the hard dependency on CONFIG_FB_DEVICE and make sysfs support
optional by using dev_of_fbinfo() at runtime. When FB_DEVICE is disabled,
sysfs operations are skipped while the code remains buildable and
type-checked.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Suggested-by: Helge Deller <deller@gmx.de> Reviewed-by: Helge Deller <deller@gmx.de> Signed-off-by: Chintan Patel <chintanlike@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de>
Chintan Patel [Wed, 7 Jan 2026 04:42:54 +0000 (20:42 -0800)]
fb: Add dev_of_fbinfo() helper for optional sysfs support
Add dev_of_fbinfo() to return the framebuffer struct device when
CONFIG_FB_DEVICE is enabled, or NULL otherwise.
This allows fbdev drivers to use sysfs interfaces via runtime checks
instead of CONFIG_FB_DEVICE ifdefs, keeping the code clean while
remaining fully buildable.
Hans de Goede [Sun, 21 Dec 2025 16:57:40 +0000 (17:57 +0100)]
fbdev: Use device_create_with_groups() to fix sysfs groups registration race
The fbdev sysfs attributes are registered after sending the uevent for
the device creation, leaving a race window where e.g. udev rules may
not be able to access the sysfs attributes because the registration is
not done yet.
Fix this by switching to device_create_with_groups(). This also results in
a nice cleanup. After switching to device_create_with_groups() all that
is left of fb_init_device() is setting the drvdata and that can be passed
to device_create[_with_groups]() too. After which fb_init_device() can
be completely removed.
Dropping fb_init_device() + fb_cleanup_device() in turn allows removing
fb_info.class_flag as they were the only user of this field.
Fixes: 5fc830d6aca1 ("fbdev: Register sysfs groups through device_add_group") Cc: stable@vger.kernel.org Cc: Shixiong Ou <oushixiong@kylinos.cn> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: smscufx: properly copy ioctl memory to kernelspace
The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from
userspace to kernelspace, and instead directly references the memory,
which can cause problems if invalid data is passed from userspace. Fix
this all up by correctly copying the memory before accessing it within
the kernel.
Guangshuo Li [Sun, 7 Dec 2025 07:25:32 +0000 (15:25 +0800)]
fbdev: rivafb: fix divide error in nv3_arb()
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
Linus Torvalds [Sat, 14 Feb 2026 03:33:39 +0000 (19:33 -0800)]
Merge tag 'bootconfig-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- Update the bootconfig parser to stop searching for a value when it
encounters a newline character
- Update the tests for bootconfig parser to ensure the good examples to
be parsed correctly by comparing the expected results
* tag 'bootconfig-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Check the parsed output of the good examples
bootconfig: Terminate value search if it hits a newline
Linus Torvalds [Sat, 14 Feb 2026 03:25:16 +0000 (19:25 -0800)]
Merge tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To
differentiate that code from the C code, add entries in for the
RUST version (with "[RUST]" around it) so that the right
maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active
filters enabled in the trace instance, the file show_event_filters
will list them so that there's only one file that needs to be
examined to see if any filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active
triggers enabled in the trace instance, the file
show_event_triggers will list them so that there's only one file
that needs to be examined to see if any triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace
instances instead of the top level instance. But if
traceoff_on_warning triggers, it doesn't stop the buffer with
trace_printk() and that data can easily be lost by being
overwritten. Have traceoff_on_warning also disable the instance
that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file
exists for every event. This displays the internal data of any
histogram enabled for that event. But it is lacking the function
that is called to process one of its fields. This is very useful
information that was missing when debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently
the size of the stack that is stored is limited to just 16 entries.
But the storage space in the histogram is 256 bytes, meaning that
it can store up to 31 entries (plus one for the count of entries).
Instead of letting that space go to waste, up the limit from 16 to
31. This makes the keys much more useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only
in a previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring
buffer if it contains data from a previous boot. It is cleared when
recording starts again, but it is not cleared when the buffer is
reset. The data is useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some
updates to the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because
it expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run
completely on the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event
happens, an irq work is triggered to wake up that waiter. This is
noisy on isolated CPUs (running NO_HZ_FULL). Trigger an IPI to a
house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after
it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into
their numbers in the trace event format files. This work queue can
also be used for other aspects of tracing that takes some time and
shouldn't be called by the init call code.
The blk_trace initialization takes a bit of time. Have the
initialization code moved to the new tracing generic work queue
function.
- Skip kprobe boot event creation call if there's no kprobes defined
on cmdline
The kprobe initialization to set up kprobes if they are defined on
the cmdline requires taking the event_mutex lock. This can be held
by other tracing code doing initialization for a long time. Since
kprobes added to the kernel command line need to be setup
immediately, as they may be tracing early initialization code, they
cannot be postponed in a work queue and must be setup in the
initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to
take the mutex and slow down the boot up code waiting to get the
lock only to find out there's nothing to do. Simply exit out early
if there's no kprobes on the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about
tracing over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more
difficult to maintain. Start splitting it up so that related code
is in their own files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of
the main buffer and gets swapped with it when a new high latency is
detected. This keeps the trace up to the highest latency around
where this max_latency buffer is never written to. It is only used
to save the last max latency trace.
A while ago a snapshot feature was added to tracefs to allow user
space to perform the same logic. It could also enable events to
trigger a "snapshot" if one of their fields hit a new high. This
was built on top of the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency
tracers to be enabled. In reality, the latency tracers depend on
the snapshot code and not the other way around. It was just that
they came first.
Restructure the code and the kconfigs to have the latency tracers
depend on snapshot code instead. This actually simplifies the logic
a bit and allows to disable more when the latency tracers are not
defined and the snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable
that could be changed by user space for each sample. If the user
change this variable, it could cause a bus contention, and reading
that variable can show up as a large latency in the trace causing a
false positive. Read this variable at the start of the sample with
a READ_ONCE() into a local variable and keep the code from sharing
cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses
a static branch to call that tracer directly. When another tracer
is added, it goes into loop logic to call all the registered
callbacks.
The code was incorrect when going back to one tracer and never
re-enabled the static branch again to do the optimization code.
- And other small fixes and cleanups"
* tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (46 commits)
function_graph: Restore direct mode when callbacks drop to one
tracing: Fix indentation of return statement in print_trace_fmt()
tracing: Reset last_boot_info if ring buffer is reset
tracing: Fix to set write permission to per-cpu buffer_size_kb
tracing: Fix false sharing in hwlat get_sample()
tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection
tracing: Better separate SNAPSHOT and MAX_TRACE options
tracing: Add tracer_uses_snapshot() helper to remove #ifdefs
tracing: Rename trace_array field max_buffer to snapshot_buffer
tracing: Move pid filtering into trace_pid.c
tracing: Move trace_printk functions out of trace.c and into trace_printk.c
tracing: Use system_state in trace_printk_init_buffers()
tracing: Have trace_printk functions use flags instead of using global_trace
tracing: Make tracing_update_buffers() take NULL for global_trace
tracing: Make printk_trace global for tracing system
tracing: Move ftrace_trace_stack() out of trace.c and into trace.h
tracing: Move __trace_buffer_{un}lock_*() functions to trace.h
tracing: Make tracing_selftest_running global to the tracing subsystem
tracing: Make tracing_disabled global for tracing system
tracing: Clean up use of trace_create_maxlat_file()
...
Linus Torvalds [Fri, 13 Feb 2026 23:39:15 +0000 (15:39 -0800)]
Merge tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
Linus Torvalds [Fri, 13 Feb 2026 23:06:58 +0000 (15:06 -0800)]
Merge tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- prioritize ofpart in physmap-core probing
- conversions to scoped for each OF child loops
Bindings:
- The bulk of the changes consists of binding fixes/updates to
restrict the use of undefined properties, which was mostly
ineffective in the current form because of the nesting of partition
nodes and the lack of compatible strings
- YAML conversions and the addition of a dma-coherent property in the
cdns,hp-nfc driver
SPI NAND:
- support for octal DTR modes (8D-8D-8D)
- support for Foresee F35SQB002G chips
And small misc fixes"
* tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (65 commits)
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all()
mtd: spinand: fix NULL pointer dereference in spinand_support_vendor_ops()
mtd: rawnand: pl353: Add message about ECC mode
mtd: rawnand: pl353: Fix software ECC support
mtd: spinand: winbond: Remove unneeded semicolon
dt-bindings: mtd: cdns,hp-nfc: Add dma-coherent property
mtd: spinand: Disable continuous read during probe
mtd: spinand: add Foresee F35SQB002G flash support
mtd: spinand: winbond: W35N octal DTR support
mtd: spinand: Add octal DTR support
mtd: spinand: Warn if using SSDR-only vendor commands in a non SSDR mode
mtd: spinand: Give the bus interface to the configuration helper
mtd: spinand: Propagate the bus interface across core helpers
mtd: spinand: Add support for setting a bus interface
mtd: spinand: Gather all the bus interface steps in one single function
mtd: spinand: winbond: Configure the IO mode after the dummy cycles
mtd: spinand: winbond: Rename IO_MODE register macro
mtd: spinand: winbond: Fix style
mtd: spinand: winbond: Register W35N vendor specific operation
mtd: spinand: winbond: Register W25N vendor specific operation
...
Linus Torvalds [Fri, 13 Feb 2026 20:13:27 +0000 (12:13 -0800)]
Merge tag 'mm-hotfixes-stable-2026-02-13-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"Three MM hotfixes, all three are cc:stable"
* tag 'mm-hotfixes-stable-2026-02-13-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
procfs: fix possible double mmput() in do_procmap_query()
mm/page_alloc: skip debug_check_no_{obj,locks}_freed with FPI_TRYLOCK
mm/hugetlb: restore failed global reservations to subpool
Linus Torvalds [Fri, 13 Feb 2026 20:02:18 +0000 (12:02 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- in-order support in virtio core
- multiple address space support in vduse
- fixes, cleanups all over the place, notably dma alignment fixes for
non-cache-coherent systems
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits)
vduse: avoid adding implicit padding
vhost: fix caching attributes of MMIO regions by setting them explicitly
vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr()
vdpa/mlx5: reuse common function for MAC address updates
vdpa/mlx5: update mlx_features with driver state check
crypto: virtio: Replace package id with numa node id
crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req
crypto: virtio: Add spinlock protection with virtqueue notification
Documentation: Add documentation for VDUSE Address Space IDs
vduse: bump version number
vduse: add vq group asid support
vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls
vduse: take out allocations from vduse_dev_alloc_coherent
vduse: remove unused vaddr parameter of vduse_domain_free_coherent
vduse: refactor vdpa_dev_add for goto err handling
vhost: forbid change vq groups ASID if DRIVER_OK is set
vdpa: document set_group_asid thread safety
vduse: return internal vq group struct as map token
vduse: add vq group support
vduse: add v1 API definition
...
Linus Torvalds [Fri, 13 Feb 2026 19:31:15 +0000 (11:31 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Loongarch:
- Add more CPUCFG mask bits
- Improve feature detection
- Add lazy load support for FPU and binary translation (LBT) register
state
- Fix return value for memory reads from and writes to in-kernel
devices
- Add support for detecting preemption from within a guest
- Add KVM steal time test case to tools/selftests
ARM:
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers
- More pKVM fixes for features that are not supposed to be exposed to
guests
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest
- Preliminary work for guest GICv5 support
- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures
- A small set of FPSIMD cleanups
- Selftest fixes addressing the incorrect alignment of page
allocation
- Other assorted low-impact fixes and spelling fixes
RISC-V:
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Transparent huge page support for hypervisor page tables
- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables
- Add RISC-V specific paging modes to KVM selftests
- Detect paging mode at runtime for selftests
s390:
- Performance improvement for vSIE (aka nested virtualization)
- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host
- Maintainership change for s390 vfio-pci
- Small quality of life improvement for protected guests
x86:
- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).
KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.
For more information, see the commit message for merge commit bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...")
- Disallow changing the virtual CPU model if L2 is active, for all
the same reasons KVM disallows change the model after the first
KVM_RUN
- Fix a bug where KVM would incorrectly reject host accesses to PV
MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
even if those were advertised as supported to userspace,
- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
where KVM would attempt to read CR3 configuring an async #PF entry
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
(for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
Only a few exports that are intended for external usage, and those
are allowed explicitly
- When checking nested events after a vCPU is unblocked, ignore
-EBUSY instead of WARNing. Userspace can sometimes put the vCPU
into what should be an impossible state, and spurious exit to
userspace on -EBUSY does not really do anything to solve the issue
- Also throw in the towel and drop the WARN on INIT/SIPI being
blocked when vCPU is in Wait-For-SIPI, which also resulted in
playing whack-a-mole with syzkaller stuffing architecturally
impossible states into KVM
- Add support for new Intel instructions that don't require anything
beyond enumerating feature flags to userspace
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2
- Add WARNs to guard against modifying KVM's CPU caps outside of the
intended setup flow, as nested VMX in particular is sensitive to
unexpected changes in KVM's golden configuration
- Add a quirk to allow userspace to opt-in to actually suppress EOI
broadcasts when the suppression feature is enabled by the guest
(currently limited to split IRQCHIP, i.e. userspace I/O APIC).
Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
option as some userspaces have come to rely on KVM's buggy behavior
(KVM advertises Supress EOI Broadcast irrespective of whether or
not userspace I/O APIC supports Directed EOIs)
- Clean up KVM's handling of marking mapped vCPU pages dirty
- Drop a pile of *ancient* sanity checks hidden behind in KVM's
unused ASSERT() macro, most of which could be trivially triggered
by the guest and/or user, and all of which were useless
- Fold "struct dest_map" into its sole user, "struct rtc_status", to
make it more obvious what the weird parameter is used for, and to
allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n
- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y
- Add a regression test for recent APICv update fixes
- Handle "hardware APIC ISR", a.k.a. SVI, updates in
kvm_apic_update_apicv() to consolidate the updates, and to
co-locate SVI updates with the updates for KVM's own cache of ISR
information
- Drop a dead function declaration
- Minor cleanups
x86 (Intel):
- Rework KVM's handling of VMCS updates while L2 is active to
temporarily switch to vmcs01 instead of deferring the update until
the next nested VM-Exit.
The deferred updates approach directly contributed to several bugs,
was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans
- Fix an SGX bug where KVM would incorrectly try to handle EPCM page
faults, and instead always reflect them into the guest. Since KVM
doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
interference and can't be resolved by KVM
- Fix a bug where KVM would register its posted interrupt wakeup
handler even if loading kvm-intel.ko ultimately failed
- Disallow access to vmcb12 fields that aren't fully supported,
mostly to avoid weirdness and complexity for FRED and other
features, where KVM wants enable VMCS shadowing for fields that
conditionally exist
- Print out the "bad" offsets and values if kvm-intel.ko refuses to
load (or refuses to online a CPU) due to a VMCS config mismatch
x86 (AMD):
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure
- Add support for virtualizing ERAPS. Note, correct virtualization of
ERAPS relies on an upcoming, publicly announced change in the APM
to reduce the set of conditions where hardware (i.e. KVM) *must*
flush the RAP
- Ignore nSVM intercepts for instructions that are not supported
according to L1's virtual CPU model
- Add support for expedited writes to the fast MMIO bus, a la VMX's
fastpath for EPT Misconfig
- Don't set GIF when clearing EFER.SVME, as GIF exists independently
of SVM, and allow userspace to restore nested state with GIF=0
- Treat exit_code as an unsigned 64-bit value through all of KVM
- Add support for fetching SNP certificates from userspace
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when
emulating VMLOAD or VMSAVE on behalf of L2
- Misc fixes and cleanups
x86 selftests:
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
support, and extend x86's infrastructure to support EPT and NPT
(for L2 guests)
- Extend several nested VMX tests to also cover nested SVM
- Add a selftest for nested VMLOAD/VMSAVE
- Rework the nested dirty log test, originally added as a regression
test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
improve test coverage and to hopefully make the test easier to
understand and maintain
guest_memfd:
- Remove kvm_gmem_populate()'s preparation tracking and half-baked
hugepage handling. SEV/SNP was the only user of the tracking and it
can do it via the RMP
- Retroactively document and enforce (for SNP) that
KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
source page to be 4KiB aligned, to avoid non-trivial complexity for
something that no known VMM seems to be doing and to avoid an API
special case for in-place conversion, which simply can't support
unaligned sources
- When populating guest_memfd memory, GUP the source page in common
code and pass the refcounted page to the vendor callback, instead
of letting vendor code do the heavy lifting. Doing so avoids a
looming deadlock bug with in-place due an AB-BA conflict betwee
mmap_lock and guest_memfd's filemap invalidate lock
Generic:
- Fix a bug where KVM would ignore the vCPU's selected address space
when creating a vCPU-specific mapping of guest memory. Actually
this bug could not be hit even on x86, the only architecture with
multiple address spaces, but it's a bug nevertheless"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
KVM: s390: Increase permitted SE header size to 1 MiB
MAINTAINERS: Replace backup for s390 vfio-pci
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
KVM: s390: vsie: Fix race in walk_guest_tables()
KVM: s390: Use guest address to mark guest page dirty
irqchip/riscv-imsic: Adjust the number of available guest irq files
RISC-V: KVM: Transparent huge page support
RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
RISC-V: KVM: Allow Zalasr extensions for Guest/VM
KVM: riscv: selftests: Add riscv vm satp modes
KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
RISC-V: KVM: Remove unnecessary 'ret' assignment
KVM: s390: Add explicit padding to struct kvm_s390_keyop
KVM: LoongArch: selftests: Add steal time test case
LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
LoongArch: KVM: Add paravirt preempt feature in hypervisor side
...
Linus Torvalds [Fri, 13 Feb 2026 19:24:38 +0000 (11:24 -0800)]
Merge tag 'uml-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Johannes Berg:
"UML was _really_ quiet, with just four small commits:
- two signal handling fixes
- dynamic addition of virtio devices
- a single code cleanup"
* tag 'uml-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
arch/um: remove unused varible err in remove_files_and_dir()
um: virtio_uml: Support adding devices via mconsole
um: Handle SIGCHLD in seccomp mode like other IRQ signals
um: Preserve errno within signal handler
The current logic to split the 64-bit argument into its 32-bit halves is
byte-order specific and a bit clunky. Use a union instead which is
easier to read and works in all cases.
GCC still generates the same machine code.
While at it, rename the arguments of the __memset64() prototype to
actually reflect their semantics.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alpha: add missing address argument in call to page_table_check_pte_clear()
After the merge of the alpha and mm trees, this code does not compile,
as a parameter is missing in a call to page_table_check_pte_clear().
The parameter was re-added in commit d7b4b67eb6b3 ("mm/page_table_check:
reinstate address parameter in [__]page_table_check_pte_clear()").
The alpha-specific code was newly added in commit dd5712f3379c ("alpha:
fix user-space corruption during memory compaction").
Fixes: 4cff5c05e076 ("Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Magnus Lindholm <linmag7@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miquel Raynal [Fri, 13 Feb 2026 17:10:09 +0000 (18:10 +0100)]
Merge tag 'nand/for-7.0' into mtd/next
SPI NAND
- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.
Shengming Hu [Fri, 13 Feb 2026 06:29:32 +0000 (14:29 +0800)]
function_graph: Restore direct mode when callbacks drop to one
When registering a second fgraph callback, direct path is disabled and
array loop is used instead. When ftrace_graph_active falls back to one,
we try to re-enable direct mode via ftrace_graph_enable_direct(true, ...).
But ftrace_graph_enable_direct() incorrectly disables the static key
rather than enabling it. This leaves fgraph_do_direct permanently off
after first multi-callback transition, so direct fast mode is never
restored.
Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260213142932519cuWSpEXeS4-UnCvNXnK2P@zte.com.cn Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function") Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Fri, 13 Feb 2026 03:17:44 +0000 (19:17 -0800)]
Merge tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Add support for control flow integrity for userspace processes.
This is based on the standard RISC-V ISA extensions Zicfiss and
Zicfilp
- Improve ptrace behavior regarding vector registers, and add some
selftests
- Optimize our strlen() assembly
- Enable the ISO-8859-1 code page as built-in, similar to ARM64, for
EFI volume mounting
- Clean up some code slightly, including defining copy_user_page() as
copy_page() rather than memcpy(), aligning us with other
architectures; and using max3() to slightly simplify an expression
in riscv_iommu_init_check()
* tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: lib: optimize strlen loop efficiency
selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function
selftests: riscv: verify ptrace accepts valid vector csr values
selftests: riscv: verify ptrace rejects invalid vector csr inputs
selftests: riscv: verify syscalls discard vector context
selftests: riscv: verify initial vector state with ptrace
selftests: riscv: test ptrace vector interface
riscv: ptrace: validate input vector csr registers
riscv: csr: define vtype register elements
riscv: vector: init vector context with proper vlenb
riscv: ptrace: return ENODATA for inactive vector extension
kselftest/riscv: add kselftest for user mode CFI
riscv: add documentation for shadow stack
riscv: add documentation for landing pad / indirect branch tracking
riscv: create a Kconfig fragment for shadow stack and landing pad support
arch/riscv: add dual vdso creation logic and select vdso based on hw
arch/riscv: compile vdso with landing pad and shadow stack note
riscv: enable kernel access to shadow stack memory via the FWFT SBI call
riscv: add kernel command line option to opt out of user CFI
riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe
...
Linus Torvalds [Fri, 13 Feb 2026 02:24:37 +0000 (18:24 -0800)]
Merge tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"power-supply core:
- sysfs: constify pointer passed to dev_attr_psp
- extend DT binding documentation for battery cells to allow
describing voltage drop behaviour
power-supply drivers:
- multiple: Remove unused gpio include header
- multiple: Fix potential IRQ use-after-free on driver unload
- bd71828: Add support for ROHM BD72720
- misc small fixes
reset drivers:
- tdx-ec-poweroff: fix restart"
* tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: bd71828: Use dev_err_probe()
dt-bindings: power: supply: google,goldfish-battery: Convert to DT schema
power: supply: qcom_battmgr: Recognize "LiP" as lithium-polymer
power: supply: wm97xx: Use devm_power_supply_register()
power: supply: wm97xx: Use devm_kcalloc()
power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler
power: reset: tdx-ec-poweroff: fix restart
docs: power: update documentation about removed function
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
MAINTAINERS: adjust file entry in ROHM BD71828 CHARGER
power: supply: ab8500_chargalg: improve kernel-doc
power: supply: sysfs: Constify pointer passed to dev_attr_psp()
power: supply: bq27xxx: fix wrong errno when bus ops are unsupported
power: reset: nvmem-reboot-mode: respect cell size for nvmem_cell_write
power: supply: sbs-battery: Fix use-after-free in power_supply_changed()
power: supply: rt9455: Fix use-after-free in power_supply_changed()
power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed()
power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed()
power: supply: pf1550: Fix use-after-free in power_supply_changed()
power: supply: goldfish: Fix use-after-free in power_supply_changed()
...
Linus Torvalds [Fri, 13 Feb 2026 01:49:33 +0000 (17:49 -0800)]
Merge tag 'nfs-for-7.0-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Use an LRU list for returning unused delegations
- Introduce a KConfig option to disable NFS v4.0 and make NFS v4.1
the default
Bugfixes:
- NFS/localio:
- Handle short writes by retrying
- Prevent direct reclaim recursion into NFS via nfs_writepages
- Use GFP_NOIO and non-memreclaim workqueue in nfs_local_commit
- Remove -EAGAIN handling in nfs_local_doio()
- pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN
- fs/nfs: Fix a readdir slow-start regression
- SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Other cleanups and improvements:
- A few other NFS/localio cleanups
- Various other delegation handling cleanups from Christoph
- Unify security_inode_listsecurity() calls
- Improvements to NFSv4 lease handling
- Clean up SUNRPC *_debug fields when CONFIG_SUNRPC_DEBUG is not set"
* tag 'nfs-for-7.0-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (60 commits)
SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
nfs: nfs4proc: Convert comma to semicolon
SUNRPC: Change list definition method
sunrpc: rpc_debug and others are defined even if CONFIG_SUNRPC_DEBUG unset
NFSv4: limit lease period in nfs4_set_lease_period()
NFSv4: pass lease period in seconds to nfs4_set_lease_period()
nfs: unify security_inode_listsecurity() calls
fs/nfs: Fix readdir slow-start regression
pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN
NFS: fix delayed delegation return handling
NFS: simplify error handling in nfs_end_delegation_return
NFS: fold nfs_abort_delegation_return into nfs_end_delegation_return
NFS: remove the delegation == NULL check in nfs_end_delegation_return
NFS: use bool for the issync argument to nfs_end_delegation_return
NFS: return void from ->return_delegation
NFS: return void from nfs4_inode_make_writeable
NFS: Merge CONFIG_NFS_V4_1 with CONFIG_NFS_V4
NFS: Add a way to disable NFS v4.0 via KConfig
NFS: Move sequence slot operations into minorversion operations
NFS: Pass a struct nfs_client to nfs4_init_sequence()
...
Linus Torvalds [Fri, 13 Feb 2026 01:19:36 +0000 (17:19 -0800)]
tools/testing: keep legacy generated files around in .gitignore file
People keep removing generated files from .gitignore files even when the
files stay around. Please don't do that: just because the file is no
longer being generated doesn't make it magically go away, and doesn't
make it suddenly be something that should now not be ignored any more.
Fixes: dd2c6ec24fca ("selftests/mm: remove virtual_address_range test") Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: SeongJae Park <sj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 13 Feb 2026 01:12:43 +0000 (17:12 -0800)]
Merge tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ATA updates from Damien Le Moal:
- Cleanup IRQ masking in the handling of completed report zones
commands (Niklas)
- Improve the handling of Thunderbolt attached devices to speed up
device removal (Henry)
- Several patches to generalize the existing max_sec quirks to
facilitates quirking the maximum command size of buggy drives, many
of which have recently showed up with the recent increase of the
default max_sectors block limit (Niklas)
- Cleanup the ahci-platform and sata dt-bindings schema (Rob,
Manivannan)
- Improve device node scan in the ahci-dwc driver (Krzysztof)
- Remove clang W=1 warnings with the ahci-imx and ahci-xgene drivers
(Krzysztof)
- Fix a long standing potential command starvation situation with
non-NCQ commands issued when NCQ commands are on-going (me)
- Limit max_sectors to 8191 on the INTEL SSDSC2KG480G8 SSD (Niklas)
- Remove Vesa Local Bus (VLB) support in the pata_legacy driver (Ethan)
- Simple fixes in the pata_cypress (typo) and pata_ftide010 (timing)
drivers (Ethan, Linus W)
* tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_ftide010: Fix some DMA timings
ata: pata_cypress: fix typo in error message
ata: pata_legacy: remove VLB support
ata: libata-core: Quirk INTEL SSDSC2KG480G8 max_sectors
dt-bindings: ata: sata: Document the graph port
ata: libata-scsi: avoid Non-NCQ command starvation
ata: libata-scsi: refactor ata_scsi_translate()
ata: ahci-xgene: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-imx: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-dwc: Simplify with scoped for each OF child loop
dt-bindings: ata: ahci-platform: Drop unnecessary select schema
ata: libata: Allow more quirks
ata: libata: Add libata.force parameter max_sec
ata: libata: Add support to parse equal sign in libata.force
ata: libata: Change libata.force to use the generic ATA_QUIRK_MAX_SEC quirk
ata: libata: Add ata_force_get_fe_for_dev() helper
ata: libata: Add ATA_QUIRK_MAX_SEC and convert all device quirks
ata: libata: avoid long timeouts on hot-unplugged SATA DAS
ata: libata-scsi: Remove superfluous local_irq_save()
Linus Torvalds [Fri, 13 Feb 2026 01:05:20 +0000 (17:05 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual smallish cycle. The NFS biovec work to push it down into RDMA
instead of indirecting through a scatterlist is pretty nice to see,
been talked about for a long time now.
- Various code improvements in irdma, rtrs, qedr, ocrdma, irdma, rxe
- Small driver improvements and minor bug fixes to hns, mlx5, rxe,
mana, mlx5, irdma
- Robusness improvements in completion processing for EFA
- New query_port_speed() verb to move past limited IBA defined speed
steps
- Support for SG_GAPS in rts and many other small improvements
- Rare list corruption fix in iwcm
- Better support different page sizes in rxe
- Device memory support for mana
- Direct bio vec to kernel MR for use by NFS-RDMA
- QP rate limiting for bnxt_re
- Remote triggerable NULL pointer crash in siw
- DMA-buf exporter support for RDMA mmaps like doorbells"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/mlx5: Implement DMABUF export ops
RDMA/uverbs: Add DMABUF object type and operations
RDMA/uverbs: Support external FD uobjects
RDMA/siw: Fix potential NULL pointer dereference in header processing
RDMA/umad: Reject negative data_len in ib_umad_write
IB/core: Extend rate limit support for RC QPs
RDMA/mlx5: Support rate limit only for Raw Packet QP
RDMA/bnxt_re: Report QP rate limit in debugfs
RDMA/bnxt_re: Report packet pacing capabilities when querying device
RDMA/bnxt_re: Add support for QP rate limiting
MAINTAINERS: Drop RDMA files from Hyper-V section
RDMA/uverbs: Add __GFP_NOWARN to ib_uverbs_unmarshall_recv() kmalloc
svcrdma: use bvec-based RDMA read/write API
RDMA/core: add rdma_rw_max_sge() helper for SQ sizing
RDMA/core: add MR support for bvec-based RDMA operations
RDMA/core: use IOVA-based DMA mapping for bvec RDMA operations
RDMA/core: add bio_vec based RDMA read/write API
RDMA/irdma: Use kvzalloc for paged memory DMA address array
RDMA/rxe: Fix race condition in QP timer handlers
RDMA/mana_ib: Add device‑memory support
...
Linus Torvalds [Fri, 13 Feb 2026 00:33:05 +0000 (16:33 -0800)]
Merge tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
- Introduce cxl_memdev_attach and pave way for soft reserved handling,
type2 accelerator enabling, and LSA 2.0 enabling. All these series
require the endpoint driver to settle before continuing the memdev
driver probe.
- Address CXL port error protocol handling and reporting.
The large patch series was split into three parts. The first two
parts are included here with the final part coming later.
The first part consists of a series of code refactoring to PCI AER
sub-system that addresses CXL and also CXL RAS code to prepare for
port error handling.
The second part refactors the CXL code to move management of
component registers to cxl_port objects to allow all CXL AER errors
to be handled through the cxl_port hierarchy.
- Provide AMD Zen5 platform address translation for CXL using ACPI
PRMT. This includes a conventions document to explain why this is
needed and how it's implemented.
- Misc CXL patches of fixes, cleanups, and updates. Including CXL
address translation for unaligned MOD3 regions.
[ TLA service: CXL is "Compute Express Link" ]
* tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (59 commits)
cxl: Disable HPA/SPA translation handlers for Normalized Addressing
cxl/region: Factor out code into cxl_region_setup_poison()
cxl/atl: Lock decoders that need address translation
cxl: Enable AMD Zen5 address translation using ACPI PRMT
cxl/acpi: Prepare use of EFI runtime services
cxl: Introduce callback for HPA address ranges translation
cxl/region: Use region data to get the root decoder
cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos()
cxl/region: Separate region parameter setup and region construction
cxl: Simplify cxl_root_ops allocation and handling
cxl/region: Store HPA range in struct cxl_region
cxl/region: Store root decoder in struct cxl_region
cxl/region: Rename misleading variable name @hpa to @hpa_range
Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement
cxl, doc: Moving conventions in separate files
cxl, doc: Remove isonum.txt inclusion
cxl/port: Unify endpoint and switch port lookup
cxl/port: Move endpoint component register management to cxl_port
cxl/port: Map Port RAS registers
cxl/port: Move dport RAS setup to dport add time
...
Linus Torvalds [Thu, 12 Feb 2026 23:52:39 +0000 (15:52 -0800)]
Merge tag 'vfio-v7.0-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
"A small cycle with the bulk in selftests and reintroducing poison
handling in the nvgrace-gpu driver. The rest are fixes, cleanups, and
some dmabuf structure consolidation.
- Update outdated mdev comment referencing the renamed
mdev_type_add() function (Julia Lawall)
- Introduce selftest support for IOMMU mapping of PCI MMIO BARs (Alex
Mastro)
- Relax selftest assertion relative to differences in huge page
handling between legacy (v1) TYPE1 IOMMU mapping behavior and the
compatibility mode supported by IOMMUFD (David Matlack)
- Reintroduce memory poison handling support for non-struct-page-
backed memory in the nvgrace-gpu variant driver (Ankit Agrawal)
- Replace dma_buf_phys_vec with phys_vec to avoid duplicate structure
and semantics (Leon Romanovsky)
- Add missing upstream bridge locking across PCI function reset,
resolving an assertion failure when secondary bus reset is used to
provide that reset (Anthony Pighin)
- Fixes to hisi_acc vfio-pci variant driver to resolve corner case
issues related to resets, repeated migration, and error injection
scenarios (Longfang Liu, Weili Qian)
- Restrict vfio selftest builds to arm64 and x86_64, resolving
compiler warnings on 32-bit archs (Ted Logan)
- Un-deprecate the fsl-mc vfio bus driver as a new maintainer has
stepped up (Ioana Ciornei)"
* tag 'vfio-v7.0-rc1' of https://github.com/awilliam/linux-vfio:
vfio/fsl-mc: add myself as maintainer
vfio: selftests: only build tests on arm64 and x86_64
hisi_acc_vfio_pci: fix the queue parameter anomaly issue
hisi_acc_vfio_pci: resolve duplicate migration states
hisi_acc_vfio_pci: update status after RAS error
hisi_acc_vfio_pci: fix VF reset timeout issue
vfio/pci: Lock upstream bridge for vfio_pci_core_disable()
types: reuse common phys_vec type instead of DMABUF open‑coded variant
vfio/nvgrace-gpu: register device memory for poison handling
mm: add stubs for PFNMAP memory failure registration functions
vfio: selftests: Drop IOMMU mapping size assertions for VFIO_TYPE1_IOMMU
vfio: selftests: Add vfio_dma_mapping_mmio_test
vfio: selftests: Align BAR mmaps for efficient IOMMU mapping
vfio: selftests: Centralize IOMMU mode name definitions
vfio/mdev: update outdated comment
Linus Torvalds [Thu, 12 Feb 2026 23:43:02 +0000 (15:43 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
Andrii Nakryiko [Tue, 10 Feb 2026 19:27:38 +0000 (11:27 -0800)]
procfs: fix possible double mmput() in do_procmap_query()
When user provides incorrectly sized buffer for build ID for PROCMAP_QUERY
we return with -ENAMETOOLONG error. After recent changes this condition
happens later, after we unlocked mmap_lock/per-VMA lock and did mmput(),
so original goto out is now wrong and will double-mmput() mm_struct. Fix
by jumping further to clean up only vm_file and name_buf.
Link: https://lkml.kernel.org/r/20260210192738.3041609-1-andrii@kernel.org Fixes: b5cbacd7f86f ("procfs: avoid fetching build ID while holding VMA lock") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reported-by: Ruikai Peng <ruikai@pwno.io> Reported-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Reported-by: syzbot+237b5b985b78c1da9600@syzkaller.appspotmail.com Cc: Ruikai Peng <ruikai@pwno.io> Closes: https://lkml.kernel.org/r/CAFD3drOJANTZPuyiqMdqpiRwOKnHwv5QgMNZghCDr-WxdiHvMg@mail.gmail.com Closes: https://lore.kernel.org/all/698aaf3c.050a0220.3b3015.0088.GAE@google.com/T/#u Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename free_pages_prepare() to __free_pages_prepare(), add an fpi_t
parameter, and skip those checks if FPI_TRYLOCK is set. To keep the fpi_t
definition in mm/page_alloc.c, add a wrapper function free_pages_prepare()
that always passes FPI_NONE and use it in mm/compaction.c.
Link: https://lkml.kernel.org/r/20260209062639.16577-1-harry.yoo@oracle.com Fixes: 8c57b687e833 ("mm, bpf: Introduce free_pages_nolock()") Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Zi Yan <ziy@nvidia.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joshua Hahn [Fri, 16 Jan 2026 20:40:36 +0000 (15:40 -0500)]
mm/hugetlb: restore failed global reservations to subpool
Commit a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool")
fixed an underflow error for hstate->resv_huge_pages caused by incorrectly
attributing globally requested pages to the subpool's reservation.
Unfortunately, this fix also introduced the opposite problem, which would
leave spool->used_hpages elevated if the globally requested pages could
not be acquired. This is because while a subpool's reserve pages only
accounts for what is requested and allocated from the subpool, its "used"
counter keeps track of what is consumed in total, both from the subpool
and globally. Thus, we need to adjust spool->used_hpages in the other
direction, and make sure that globally requested pages are uncharged from
the subpool's used counter.
Each failed allocation attempt increments the used_hpages counter by how
many pages were requested from the global pool. Ultimately, this renders
the subpool unusable, as used_hpages approaches the max limit.
The issue can be reproduced as follows:
1. Allocate 4 hugetlb pages
2. Create a hugetlb mount with max=4, min=2
3. Consume 2 pages globally
4. Request 3 pages from the subpool (2 from subpool + 1 from global)
4.1 hugepage_subpool_get_pages(spool, 3) succeeds.
used_hpages += 3
4.2 hugetlb_acct_memory(h, 1) fails: no global pages left
used_hpages -= 2
5. Subpool now has used_hpages = 1, despite not being able to
successfully allocate any hugepages. It believes it can now only
allocate 3 more hugepages, not 4.
With each failed allocation attempt incrementing the used counter, the
subpool eventually reaches a point where its used counter equals its
max counter. At that point, any future allocations that try to
allocate hugeTLB pages from the subpool will fail, despite the subpool
not having any of its hugeTLB pages consumed by any user.
Once this happens, there is no way to make the subpool usable again,
since there is no way to decrement the used counter as no process is
really consuming the hugeTLB pages.
The underflow issue that the original commit fixes still remains fixed
as well.
Without this fix, used_hpages would keep on leaking if
hugetlb_acct_memory() fails.
Link: https://lkml.kernel.org/r/20260116204037.2270096-1-joshua.hahnjy@gmail.com Fixes: a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool") Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com> Acked-by: Usama Arif <usama.arif@linux.dev> Cc: David Hildenbrand <david@kernel.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Ma Wupeng <mawupeng1@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Waiman Long <longman@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Thu, 12 Feb 2026 23:07:50 +0000 (15:07 -0800)]
Merge tag 'for-7.0/io_uring-zcrx-large-buffers-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring large rx buffer support from Jens Axboe:
"Now that the networking updates are upstream, here's the support for
large buffers for zcrx.
Using larger (bigger than 4K) rx buffers can increase the effiency of
zcrx. For example, it's been shown that using 32K buffers can decrease
CPU usage by ~30% compared to 4K buffers"
* tag 'for-7.0/io_uring-zcrx-large-buffers-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: implement large rx buffer support
Linus Torvalds [Thu, 12 Feb 2026 22:47:35 +0000 (14:47 -0800)]
Merge tag 'libnvdimm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
"A kmap conversion and a bug fix this go around:
- drivers/nvdimm: Use local kmaps
- nvdimm: virtio_pmem: serialize flush requests"
* tag 'libnvdimm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: virtio_pmem: serialize flush requests
drivers/nvdimm: Use local kmaps
Linus Torvalds [Thu, 12 Feb 2026 22:31:02 +0000 (14:31 -0800)]
Merge tag 'trace-rtla-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull RTLA updates from Steven Rostedt:
- Remove unused function declarations
Some functions were removed in recent code consolidation 6.18, but
their prototypes were not removed from headers. Remove them.
- Set stop threshold after enabling instances
Prefer recording samples without stopping on them on the start of
tracing to stopping on samples that are never recorded. This fixes
flakiness of some RTLA tests and unifies behavior of sample
collection between tracefs mode and BPF mode.
- Consolidate usage help message implementation
RTLA tools (osnoise-top, osnoise-hist, timerlat-top, timerlat-hist)
each implement usage help individually. Move common logic between
them into a new function to reduce code duplication.
- Add BPF actions feature
Add option --bpf-action to attach a BPF program (passed as filename
of its ELF representation) to be executed via BPF tail call at
latency threshold.
- Consolidate command line option parsing
Each RTLA tool implements the parsing of command line options
individually. Now that we have a common structure for parameters,
unify the parsing of those options common among all four tools into
one function.
- De-duplicate cgroup common code
Two functions in utils.c, setting cgroup for comm and setting cgroup
for pid, duplicate code for constructing the cgroup path. Extract it
to a new helper function.
- String and error handling fixes and cleanups
There were several instances of unsafe string and error handling that
could cause invalid memory access; fix them. Also, remove a few
unused headers, update .gitignore, and deduplicate code.
* tag 'trace-rtla-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (30 commits)
rtla: Fix parse_cpu_set() bug introduced by strtoi()
rtla: Fix parse_cpu_set() return value documentation
rtla: Ensure null termination after read operations in utils.c
rtla: Make stop_tracing variable volatile
rtla: Add generated output files to gitignore
rtla: Fix NULL pointer dereference in actions_parse
rtla: Remove unused headers
rtla: Remove redundant memset after calloc
rtla: Use standard exit codes for result enum
rtla: Replace atoi() with a robust strtoi()
rtla: Introduce for_each_action() helper
tools/rtla: Deduplicate cgroup path opening code
tools/rtla: Consolidate -H/--house-keeping option parsing
tools/rtla: Consolidate -P/--priority option parsing
tools/rtla: Consolidate -e/--event option parsing
tools/rtla: Consolidate -d/--duration option parsing
tools/rtla: Consolidate -D/--debug option parsing
tools/rtla: Consolidate -C/--cgroup option parsing
tools/rtla: Consolidate -c/--cpus option parsing
tools/rtla: Add common_parse_options()
...
Linus Torvalds [Thu, 12 Feb 2026 22:08:49 +0000 (14:08 -0800)]
Merge tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier updates from Steven Rostedt:
- Refactor da_monitor to minimize macros
Complete refactor of da_monitor.h to reduce reliance on macros
generating functions. Use generic static functions and uses the
preprocessor only when strictly necessary (e.g. for tracepoint
handlers).
The change essentially relies on functions with generic names (e.g.
da_handle) instead of monitor-specific as well adding the need to
define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including
the header rather than calling macros that would define functions.
Also adapt monitors and documentation accordingly.
- Cleanup DA code generation scripts
Clean up functions in dot2c removing reimplementations of trivial
library functions (__buff_to_string) and removing some other unused
intermediate steps.
- Annotate functions with types in the rvgen python scripts
- Remove superfluous assignments and cleanup generated code
The rvgen scripts generate a superfluous assignment to 0 for enum
variables and don't add commas to the last elements, which is against
the kernel coding standards. Change the generation process for a
better compliance and slightly simpler logic.
- Remove superfluous declarations from generated code
The monitor container source files contained a declaration and a
definition for the rv_monitor variable. The former is superfluous and
was removed.
- Fix reference to outdated documentation
s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in
da_monitor.h
* tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix documentation reference in da_monitor.h
verification/rvgen: Remove unused variable declaration from containers
verification/dot2c: Remove superfluous enum assignment and add last comma
verification/dot2c: Remove __buff_to_string() and cleanup
verification/rvgen: Annotate DA functions with types
verification/rvgen: Adapt dot2k and templates after refactoring da_monitor.h
Documentation/rv: Adapt documentation after da_monitor refactoring
rv: Cleanup da_monitor after refactor
rv: Refactor da_monitor to minimise macros
Linus Torvalds [Thu, 12 Feb 2026 22:04:43 +0000 (14:04 -0800)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"The main focus for this series has been to improve OpenRISC kernel
out-of-the-box support for FPGA dev boards.
- Add device tree configurations for De0 Nano single and multicore
configurations
- Fix bug in OpenRISC SMP preventing the kernel from running on FPGA
boards, due to IPIs not being unmasked on secondary CPUs in some
configurations
- Pick up a fix from Brian Masney defining the nop() macro to fix
build failures on OpenRISC for drivers using it"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: define arch-specific version of nop()
openrisc: dts: Add de0 nano multicore config and devicetree
openrisc: dts: Split simple smp dts to dts and dtsi
openrisc: Fix IPIs on simple multicore systems
openrisc: dts: Add de0 nano config and devicetree
Linus Torvalds [Thu, 12 Feb 2026 22:01:38 +0000 (14:01 -0800)]
Merge tag 'configfs-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux
Pull configfs updates from Andreas Hindborg:
- Switch the configfs rust bindings to use c string literals provided
by the compiler, rather than a macro
- A follow up on constifying `configfs_item_operations`, applying the
change to the configfs sample
* tag 'configfs-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux:
samples: configfs: Constify struct configfs_item_operations and configfs_group_operations
rust: configfs: replace `kernel::c_str!` with C-Strings
Linus Torvalds [Thu, 12 Feb 2026 20:13:01 +0000 (12:13 -0800)]
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Linus Torvalds [Thu, 12 Feb 2026 19:32:37 +0000 (11:32 -0800)]
Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
Linus Torvalds [Thu, 12 Feb 2026 18:57:57 +0000 (10:57 -0800)]
Merge tag 'fs_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and isofs updates from Jan Kara:
- a fix for quotactl livelock during filesystem freezing
- a small improvement for isofs
- a documentation fix for ext2
* tag 'fs_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: support full length file names (255 instead of 253)
quota: fix livelock between quotactl and freeze_super
doc : fix a broken link in ext2.rst
Linus Torvalds [Thu, 12 Feb 2026 18:52:46 +0000 (10:52 -0800)]
Merge tag 'fsnotify_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"A set of fixes to shutdown fsnotify subsystem before invalidating
dcache thus addressing some nasty possible races"
* tag 'fsnotify_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Shutdown fsnotify before destroying sb's dcache
fsnotify: Use connector list for destroying inode marks
fsnotify: Track inode connectors for a superblock
Linus Torvalds [Thu, 12 Feb 2026 18:41:34 +0000 (10:41 -0800)]
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity updates from Eric Biggers:
"fsverity cleanups, speedup, and memory usage optimization from
Christoph Hellwig:
- Move some logic into common code
- Fix btrfs to reject truncates of fsverity files
- Improve the readahead implementation
- Store each inode's fsverity_info in a hash table instead of using a
pointer in the filesystem-specific part of the inode.
This optimizes for memory usage in the usual case where most files
don't have fsverity enabled.
- Look up the fsverity_info fewer times during verification, to
amortize the hash table overhead"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: remove inode from fsverity_verification_ctx
fsverity: use a hashtable to find the fsverity_info
btrfs: consolidate fsverity_info lookup
f2fs: consolidate fsverity_info lookup
ext4: consolidate fsverity_info lookup
fs: consolidate fsverity_info lookup in buffer.c
fsverity: push out fsverity_info lookup
fsverity: deconstify the inode pointer in struct fsverity_info
fsverity: kick off hash readahead at data I/O submission time
ext4: move ->read_folio and ->readahead to readpage.c
readahead: push invalidate_lock out of page_cache_ra_unbounded
fsverity: don't issue readahead for non-ENOENT errors from __filemap_get_folio
fsverity: start consolidating pagecache code
fsverity: pass struct file to ->write_merkle_tree_block
f2fs: don't build the fsverity work handler for !CONFIG_FS_VERITY
ext4: don't build the fsverity work handler for !CONFIG_FS_VERITY
fs,fsverity: clear out fsverity_info from common code
fs,fsverity: reject size changes on fsverity files in setattr_prepare
Linus Torvalds [Thu, 12 Feb 2026 18:19:58 +0000 (10:19 -0800)]
Merge tag 'ext4_for_linus-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New features and improvements for the ext4 file system
- Avoid unnecessary cache invalidation in the extent status cache
(es_cache) when adding extents to be cached in the es_cache and we
are not changing the extent tree
- Add a sysfs parameter, err_report_sec, to control how frequently to
log a warning message that file system inconsistency has been
detected (Previously we logged the warning message every 24 hours)
- Avoid unnecessary forced ordered writes when appending to a file
when delayed allocation is enabled
- Defer splitting unwritten extents to I/O completion to improve
write performance of concurrent direct I/O writes to multiple files
- Refactor and add kunit tests to the extent splitting and conversion
code paths
Various Bug Fixes:
- Fix a panic when the debugging DOUBLE_CHECK macro is defined
- Avoid using fast commit for rare and complex file system operations
to make fast commit easier to reason about. This can also avoid
some corner cases that could result in file system inconsistency if
there is a crash between the fast commit before a subsequent full
commit
- Fix memory leaks in error paths
- Fix a false positive reports caused when running stress tests using
mixed huge-page workloads caused by a race between page migration
and bitmap updates
- Fix a potential recursion into file system reclaim when evicting an
inode when fast commit is enabled
- Fix a warning caused by a potential double decrement to the dirty
clusters counter when executing FS_IOC_SHUTDOWN when running a
stress test
- Enable mballoc optimized scanning regardless whether the inode is
using indirect blocks or extent trees to map blocks"
* tag 'ext4_for_linus-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (45 commits)
et4: allow zeroout when doing written to unwritten split
ext4: refactor split and convert extents
ext4: refactor zeroout path and handle all cases
ext4: propagate flags to ext4_convert_unwritten_extents_endio()
ext4: propagate flags to convert_initialized_extent()
ext4: add extent status cache support to kunit tests
ext4: kunit tests for higher level extent manipulation functions
ext4: kunit tests for extent splitting and conversion
ext4: use optimized mballoc scanning regardless of inode format
ext4: always allocate blocks only from groups inode can use
ext4: fix dirtyclusters double decrement on fs shutdown
ext4: fast commit: make s_fc_lock reclaim-safe
ext4: fix e4b bitmap inconsistency reports
ext4: remove redundant NULL check after __GFP_NOFAIL
ext4: remove EXT4_GET_BLOCKS_IO_CREATE_EXT
ext4: simplify the mapping query logic in ext4_iomap_begin()
ext4: remove unused unwritten parameter in ext4_dio_write_iter()
ext4: remove useless ext4_iomap_overwrite_ops
ext4: avoid starting handle when dio writing an unwritten extent
ext4: don't split extent before submitting I/O
...
Linus Torvalds [Thu, 12 Feb 2026 16:57:31 +0000 (08:57 -0800)]
Merge tag 'for-linus-7.0-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
- Fixes for string handling in orangefs-debugfs.c and xattr.c (Thorsten
Blum)
* tag 'for-linus-7.0-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
fs/orangefs: Replace deprecated strcpy with memcpy + strscpy
orangefs: Replace deprecated strcpy with strscpy
Linus Torvalds [Thu, 12 Feb 2026 16:31:12 +0000 (08:31 -0800)]
Merge tag 'v7.0-rc-part1-ksmbd-and-smbdirect-fixes' of git://git.samba.org/ksmbd
Pull smb server and smbdirect updates from Steve French:
- Fix tcp connection leak
- Fix potential use after free when freeing multichannel
- Fix locking problem in showing channel list
- Locking improvement for tree connection
- Fix infinite loop when signing errors
- Add /proc interface for monitoring server state
- Fixes to avoid mixing iWarp and InfiniBand/RoCEv1/RoCEv2
port ranges used for smbdirect
- Fixes for smbdirect credit handling problems, these make
the connections more reliable
* tag 'v7.0-rc-part1-ksmbd-and-smbdirect-fixes' of git://git.samba.org/ksmbd: (32 commits)
ksmbd: fix non-IPv6 build
ksmbd: convert tree_conns_lock to rw_semaphore
ksmbd: fix missing chann_lock while iterating session channel list
ksmbd: add chann_lock to protect ksmbd_chann_list xarray
smb: server: correct value for smb_direct_max_fragmented_recv_size
smb: client: correct value for smbd_max_fragmented_recv_size
smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()
ksmbd: add procfs interface for runtime monitoring and statistics
ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths
smb: server: make use of rdma_restrict_node_type()
smb: client: make use of rdma_restrict_node_type()
RDMA/core: introduce rdma_restrict_node_type()
smb: client: let send_done handle a completion without IB_SEND_SIGNALED
smb: client: let smbd_post_send_negotiate_req() use smbd_post_send()
smb: client: fix last send credit problem causing disconnects
smb: client: make use of smbdirect_socket.send_io.bcredits
smb: client: use smbdirect_send_batch processing
smb: client: introduce and use smbd_{alloc, free}_send_io()
smb: client: split out smbd_ib_post_send()
smb: client: port and use the wait_for_credits logic used by server
...
Linus Torvalds [Thu, 12 Feb 2026 16:23:53 +0000 (08:23 -0800)]
Merge tag 'nfsd-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Neil Brown and Jeff Layton contributed a dynamic thread pool sizing
mechanism for NFSD. The sunrpc layer now tracks minimum and maximum
thread counts per pool, and NFSD adjusts running thread counts based
on workload: idle threads exit after a timeout when the pool exceeds
its minimum, and new threads spawn automatically when all threads are
busy. Administrators control this behavior via the nfsdctl netlink
interface.
Rick Macklem, FreeBSD NFS maintainer, generously contributed server-
side support for the POSIX ACL extension to NFSv4, as specified in
draft-ietf-nfsv4-posix-acls. This extension allows NFSv4 clients to
get and set POSIX access and default ACLs using native NFSv4
operations, eliminating the need for sideband protocols. The feature
is gated by a Kconfig option since the IETF draft has not yet been
ratified.
Chuck Lever delivered numerous improvements to the xdrgen tool. Error
reporting now covers parsing, AST transformation, and invalid
declarations. Generated enum decoders validate incoming values against
valid enumerator lists. New features include pass-through line support
for embedding C directives in XDR specifications, 16-bit integer
types, and program number definitions. Several code generation issues
were also addressed.
When an administrator revokes NFSv4 state for a filesystem via the
unlock_fs interface, ongoing async COPY operations referencing that
filesystem are now cancelled, with CB_OFFLOAD callbacks notifying
affected clients.
The remaining patches in this pull request are clean-ups and minor
optimizations. Sincere thanks to all contributors, reviewers, testers,
and bug reporters who participated in the v7.0 NFSD development cycle"
* tag 'nfsd-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits)
NFSD: Add POSIX ACL file attributes to SUPPATTR bitmasks
NFSD: Add POSIX draft ACL support to the NFSv4 SETATTR operation
NFSD: Add support for POSIX draft ACLs for file creation
NFSD: Add support for XDR decoding POSIX draft ACLs
NFSD: Refactor nfsd_setattr()'s ACL error reporting
NFSD: Do not allow NFSv4 (N)VERIFY to check POSIX ACL attributes
NFSD: Add nfsd4_encode_fattr4_posix_access_acl
NFSD: Add nfsd4_encode_fattr4_posix_default_acl
NFSD: Add nfsd4_encode_fattr4_acl_trueform_scope
NFSD: Add nfsd4_encode_fattr4_acl_trueform
Add RPC language definition of NFSv4 POSIX ACL extension
NFSD: Add a Kconfig setting to enable support for NFSv4 POSIX ACLs
xdrgen: Implement pass-through lines in specifications
nfsd: cancel async COPY operations when admin revokes filesystem state
nfsd: add controls to set the minimum number of threads per pool
nfsd: adjust number of running nfsd threads based on activity
sunrpc: allow svc_recv() to return -ETIMEDOUT and -EBUSY
sunrpc: split new thread creation into a separate function
sunrpc: introduce the concept of a minimum number of threads per pool
sunrpc: track the max number of requested threads in a pool
...
Add a blank line after variable declarations in fatent.c and file.c.
This improves readability and makes code style more consistent
across the exfat subsystem.
Signed-off-by: William Hansen-Baird <william.hansen.baird@gmail.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
projects / thirdparty / linux.git / log
