Märt Põder [Mon, 15 Aug 2016 09:46:21 +0000 (11:46 +0200)]
locales: et_EE: locale has wrong {p,n}_cs_precedes value [BZ #20459]
According to "Requirements of information technology in Estonian
language and cultural environment" the monetary symbol should be
written after the amount number:
Joseph Myers [Fri, 12 Aug 2016 17:34:01 +0000 (17:34 +0000)]
Fix test-fexcept when "inexact" implicitly raised.
ISO C allows feraiseexcept to raise "inexact", in addition to the
requested exceptions, when requested to raise "overflow" or
"underflow". Testing on ARM and PowerPC e500 (where glibc's
feraiseexcept has this property) showed that the new test-fexcept test
failed to allow for this; this patch fixes it, by wrapping
feraiseexcept to clear FE_INEXACT if implicitly raised and not raised
before the call. (It would also be possible to do this with
fesetexcept, which always affects exactly the requested flags, but
this patch avoids making this fix depend on the fesetexcept changes.)
Tested for x86_64, x86, arm and e500.
* math/test-fexcept.c (feraiseexcept_exact): New function.
(test_set): Call feraiseexcept_exact instead of feraiseexcept.
(test_except): Likewise.
As shown by the test math/test-fexcept, the powerpc fesetexceptflag
implementation fails to clear a previously set FE_INVALID flag, when
that flag is clear in the saved exceptions and FE_INVALID is included
in the mask of flags to restore, because it fails to mask out the
sub-exceptions of FE_INVALID from the FPSCR state. This patch fixes
the masking logic accordingly.
Tested for powerpc.
[BZ #20455]
* sysdeps/powerpc/fpu/fsetexcptflg.c (__fesetexceptflag): Mask out
all FE_INVALID sub-exceptions from FPSCR when FE_INVALID specified
to be restored.
Joseph Myers [Wed, 10 Aug 2016 21:01:08 +0000 (21:01 +0000)]
Add tests for fegetexceptflag, fesetexceptflag.
I noticed that there was no meaningful test coverage for
fegetexceptflag and fesetexceptflag (one test ensures that calls to
them compile and link, but nothing to verify they work correctly).
This patch adds tests for these functions.
fesetexceptflag is meant to set the relevant exception flag bits to
the saved state without causing enabled traps to be taken. On some
architectures, it is not possible to set exception flag bits without
causing enabled traps to occur. Such architectures need to define
EXCEPTION_SET_FORCES_TRAP to 1 in their math-tests.h, as is done in
this patch for powerpc. x86 avoids needing to define this because the
traps resulting from setting exception bits don't occur until the next
floating-point operation or fwait instruction.
Tested for x86_64, x86 and powerpc. Note that test-fexcept fails for
powerpc because of a pre-existing bug in fesetexceptflag for powerpc,
which I'll fix separately.
* math/test-fexcept-traps.c: New file.
* math/test-fexcept.c: Likewise.
* math/Makefile (tests): Add test-fexcept and test-fexcept-traps.
* sysdeps/generic/math-tests.h (EXCEPTION_SET_FORCES_TRAP): New
macro.
* sysdeps/powerpc/math-tests.h [!__NO_FPRS__]
(EXCEPTION_SET_FORCES_TRAP): Likewise.
Martin Pitt [Fri, 14 Aug 2015 05:22:37 +0000 (01:22 -0400)]
locales: en_CA: update d_fmt [BZ #9842]
The date format in en_CA/LC_TIME specifies the date format as "%d/%m/%y".
However, it should be "%Y-%m-%d". This is the standard date format in
Canada as specified by the Canadian Standards Association in CSA Z234.5:1989,
which adopts the ISO 8601 standard.
Here's the web page from the National Research Council of Canada
citing ISO 8601 as the standard date/time format in Canada:
http://www.nrc-cnrc.gc.ca/eng/services/time/faq/#Q8
International Standard ISO 8601 specifies numeric representations
of date and time. The recommended full format is of the form
2001-12-31 23:59:28.73 UTC. The intent of this standard is to avoid
confusion in international communications which can arise with the
many different national notations. This format has the advantage
that it permits dates to be readily sorted in chronological order
by computer systems.
Aurelien Jarno [Fri, 5 Aug 2016 20:35:01 +0000 (22:35 +0200)]
sparc32/sparcv9: add a VIS3 version of fdim
sparc32 passes floating point values in the integer registers. VIS3
instructions gives access to the movwtos instruction to directly
transfer a value from an integer register to a floating point register.
Therefore it makes sense to provide a VIS3 version consisting in the
generic version compiled with -mvis3.
Changelog:
* math/s_fdim.c: Avoid alias renamed.
* math/s_fdimf.c: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
Add s_fdimf-vis3, s_fdim-vis3.
(CFLAGS-s_fdimf-vis3.c): New. Set to -Wa,-Av9d -mvis3.
(CFLAGS-s_fdim-vis3.c): Likewise.
sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim-vis3.c: New file.
sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_fdim.c: Likewise.
Aurelien Jarno [Fri, 5 Aug 2016 20:35:01 +0000 (22:35 +0200)]
sparc: remove fdim sparc specific implementations
The fdim and fdimf functions on sparc do not fully follow the standard
and do not set errno to ERANGE when the result overflows. Since glibc
2.24 this causes the two following tests to fail:
Failure: fdim (max_value, -max_value): errno set to 0, expected 34 (ERANGE)
Failure: fdim_upward (max_value, -max_value): errno set to 0, expected 34 (ERANGE)
It happens that using GCC with the generic C code generates very similar
code to the sparc specific implementations. Therefore this patches
remove them. Note it might still worth adding a vis3 specific version of
fdim on sparc32/sparcv9, this is done in a following patch to ease
backporting.
Aurelien Jarno [Fri, 5 Aug 2016 20:35:01 +0000 (22:35 +0200)]
sparc: build with -mvis on sparc32/sparcv9 and sparc64
When building for sparc32/sparcv9 or sparc64, we assume that VIS
instructions are available and use them in the sparc specific assembly
code. However we do not tell GCC to use such instructions, resulting in
slightly suboptimal code.
Paul E. Murphy [Fri, 15 Jul 2016 15:57:07 +0000 (10:57 -0500)]
Improve gen-libm-test.pl LIT() application
When bootstrapping float128, this exposed a number of areas where
the L suffix is incorrectly applied to simple expressions when it
should be applied to each constant in the expression.
In order to stave off more macros in libm-test.inc, apply_lit is
made slightly more intelligent. It will now split expressions
based on space characters, and attempt to apply LIT() to each
token.
Having done this, there are numerous spacing issues within
libm-test.inc which have been fixed.
The above is problematic when the L real suffix is not the most
expressive modifier, and the compiler complains (i.e ppc64) or
silently truncates a value (i.e ppc64).
Joseph Myers [Fri, 5 Aug 2016 18:15:00 +0000 (18:15 +0000)]
Fix math.h comment about bits/mathdef.h.
math.h has a comment about definitions from <bits/mathdef.h>. This
comment is in the wrong place in math.h, far below the inclusion of
<bits/mathdef.h>. It was originally above the inclusion, but the
inclusion was moved by
1998-11-05 Ulrich Drepper <drepper@cygnus.com>
* math/math.h: Unconditionally include bits/mathdef.h. Declare
long double functions only if __NO_LONG_DOUBLE_MATH is not
defined.
[...]
without moving the comment. Furthermore, the comment refers
incorrectly to FLT_EVAL_METHOD and DECIMAL_DIG, which are actually
<float.h> macros, and INFINITY, which is in <bits/inf.h>.
This patch moves the comment back above the include it refers to and
removes the description of macros not defined by the header.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* math/math.h: Move comment about <bits/mathdef.h> definitions
above inclusion of <bits/mathdef.h>. Do not mention
FLT_EVAL_METHOD, INFINITY or DECIMAL_DIG in that comment.
Joseph Myers [Thu, 4 Aug 2016 20:50:31 +0000 (20:50 +0000)]
Do not call __nan in scalb functions.
When libm functions return a NaN: if it is for NaN input, it should be
computed from that input (e.g. adding it to itself), so that payloads
are propagated and signaling NaNs quieted, while if it is for non-NaN
input, it should be produced by a computation such as
(x - x) / (x - x), which raises "invalid" at the same time as
producing an appropriate NaN, so avoiding any need for a call to
feraiseexcept.
Various libm functions, however, call __nan ("") (or __nanf or __nanl)
to determine the NaN to return, together with using feraiseexcept
(FE_INVALID) to raise the exception. sysdeps/generic/math_private.h
has an optimization for those functions with constant "" argument so
this doesn't actually involve a call to the __nan function, but it is
still not the preferred approach for producing NaNs. (The optimized
code also always uses the NAN macro, i.e. produces a default NaN for
float converted to whatever the target type is, and on some
architectures that may not be the same as the preferred default NaN
for double or long double.)
This patch fixes the scalb functions to use the conventional method of
generating NaNs and raising "invalid" with an appropriate
computation. (Most instances of this issue are in the complex
functions, where it can more readily be fixed once they have been made
type-generic and so only a third as many places need fixing. Some of
the complex functions use __nan ("") + __nan (""), where the addition
serves no purpose whatsoever.)
Tested for x86_64 and x86.
* math/e_scalb.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
* math/e_scalbf.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
* math/e_scalbl.c: Do not include <fenv.h>.
(invalid_fn): Do calculation resulting in NaN instead of raising
FE_INVALID and returning a NaN explicitly.
Florian Weimer [Thu, 4 Aug 2016 09:10:57 +0000 (11:10 +0200)]
x86: Use sysdep.o from libc.a in static libraries
Static libraries can use the sysdep.o copy in libc.a without
a performance penalty. This results in a visible difference
if libpthread.a is relinked into a single object file (which
is needed to support libraries which check for the presence
of certain symbols to enable threading support, which generally
fails with static linking unless libpthread.a is relinked).
Joseph Myers [Wed, 3 Aug 2016 22:56:54 +0000 (22:56 +0000)]
Also handle __STDC_WANT_IEC_60559_BFP_EXT__ in <tgmath.h>.
My __STDC_WANT_IEC_60559_BFP_EXT__ patch omitted to update the
conditions on the nextup and nextdown type-generic macros in
<tgmath.h>. This patch updates those conditions accordingly. (As
glibc doesn't currently have an exp10 type-generic macro, no such
changes are needed relating to __STDC_WANT_IEC_60559_FUNCS_EXT__;
adding such a type-generic macro would be a new feature.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch). Committed.
* math/tgmath.h (nextdown): Define if
[__GLIBC_USE (IEC_60559_BFP_EXT)], not if [__USE_GNU].
(nextup): Likewise.
Joseph Myers [Wed, 3 Aug 2016 22:21:37 +0000 (22:21 +0000)]
Support __STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro.
This patch implements support for the
__STDC_WANT_IEC_60559_FUNCS_EXT__ feature test macro, following the
__GLIBC_USE approach used for other ISO C feature test macros.
Currently this only affects the exp10 functions (which glibc has had
for a long time).
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_FUNCS_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document.
* manual/creature.texi (__STDC_WANT_IEC_60559_FUNCS_EXT__):
Document macro.
* manual/math.texi (exp10): Document as ISO from TS 18661-4:2015.
(exp10f): Likewise.
(exp10l): Likewise.
* math/bits/mathcalls.h (exp10): Declare if
[__GLIBC_USE (IEC_60559_FUNCS_EXT)], not [__USE_GNU].
Zack Weinberg [Tue, 10 May 2016 15:07:42 +0000 (11:07 -0400)]
Deprecate inclusion of <sys/sysmacros.h> by <sys/types.h>
The macros defined by <sys/sysmacros.h> are not part of POSIX nor XSI, and
their names frequently collide with user code; see for instance glibc bug
19239 and Red Hat bug 130601. <stdlib.h> includes <sys/types.h> under
_GNU_SOURCE, and C++ code presently cannot avoid being compiled under
_GNU_SOURCE, exacerbating the problem.
* NEWS: Inclusion of <sys/sysmacros.h> by <sys/types.h> is deprecated.
* misc/sys/sysmacros.h: If __SYSMACROS_DEPRECATED_INCLUSION is defined,
define major, minor, and makedev to issue deprecation warnings on use.
If __SYSMACROS_DEPRECATED_INCLUSION is *not* defined, suppress
previously-activated deprecation warnings for these macros and prevent
subsequent inclusions of this header from having any effect.
* posix/sys/types.h: Define __SYSMACROS_DEPRECATED_INCLUSION before
including <sys/sysmacros.h>, and undefine it again afterward.
Minimize sysdeps code involved in defining major/minor/makedev.
Presently sys/sysmacros.h is entirely defined in sysdeps. This would
mean that the deprecation logic coming up in the next patch would have
to be written twice (in generic/ and unix/sysv/linux/). To avoid that,
hoist all but the unavoidably system-dependent logic to misc/, leaving a
bits/ header behind. This also promotes the Linux-specific encoding of
dev_t, which accommodates 32-bit major and minor numbers in a 64-bit dev_t,
to generic, as glibc's dev_t is always 64 bits wide.
The former Linux implementation used inline functions to avoid evaluating
arguments more than once. After this change, all platforms use inline
functions, which means that three new symbols are added to the generic ABI.
(These symbols are in the user namespace, which is how they have always
been on Linux. They begin with "gnu_dev_", so collisions with user code
are pretty unlikely.)
New ports henceforth need only provide a bits/sysmacros.h defining
internal macros __SYSMACROS_{DECLARE,DEFINE}_{MAJOR,MINOR,MAKEDEV}.
This is only necessary if the kernel encoding is incompatible with
the now-generic encoding (for instance, it would be necessary for
FreeBSD).
While I was at it, I added a basic round-trip test for these functions.
* sysdeps/generic/sys/sysmacros.h: Delete file.
* sysdeps/unix/sysv/linux/makedev.c: Delete file.
* sysdeps/unix/sysv/linux/sys/sysmacros.h: Move file ...
* bits/sysmacros.h: ... here; this encoding is now the generic
encoding. Now defines only the following macros:
__SYSMACROS_DECLARE_MAJOR, __SYSMACROS_DEFINE_MAJOR,
__SYSMACROS_DECLARE_MINOR, __SYSMACROS_DEFINE_MINOR,
__SYSMACROS_DECLARE_MAKEDEV, __SYSMACROS_DEFINE_MAKEDEV.
* misc/sys/sysmacros.h, misc/makedev.c: New files that use
bits/sysmacros.h and the above new macros to generate the
public implementations of major, minor, and makedev.
* misc/tst-makedev.c: New test.
* include/sys/sysmacros.h: New wrapper.
Add utility macros for clang detection, and deprecation with messages.
There are three new macros added to features.h and sys/cdefs.h:
* __glibc_clang_prereq: just like __GNUC_PREREQ, but for clang.
* __glibc_clang_has_extension: wraps clang's intrinsic __has_extension.
Writing "#if defined __clang__ && __has_extension (...)" doesn't work,
because compilers other than clang will object to the unknown macro
__has_extension even though they don't need to evaluate it.
Instead, write "#if __glibc_clang_has_extension (...)".
* __attribute_deprecated_msg__(msg): like __attribute_deprecated__, but
if possible, prints a message.
The first two are used to define the third. The third will be used
in subsequent patches.
* include/features.h (__glibc_clang_prereq): New macro.
* misc/sys/cdefs.h (__glibc_clang_has_extension)
(__attribute_deprecated_msg__): New macros.
Joseph Myers [Wed, 3 Aug 2016 17:30:41 +0000 (17:30 +0000)]
Support __STDC_WANT_IEC_60559_BFP_EXT__ feature test macro.
This patch implements support for the __STDC_WANT_IEC_60559_BFP_EXT__
feature test macro from ISO/IEC 18661-1:2014, following the
__GLIBC_USE approach now used for __STDC_WANT_LIB_EXT2__. For this
macro, the relevant consideration is whether it is defined or
undefined when an affected header is included (not what its value is
if defined, and not whether it's defined or undefined when any other
unaffected system header is included).
Currently this macro only affects the issignaling macro and the nextup
and nextdown functions (so they can be enabled by defining this macro,
not just by defining _GNU_SOURCE as previously). Any further features
from this TS added in future would also be conditioned on this macro.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h (__GLIBC_USE_IEC_60559_BFP_EXT): New
macro.
* include/features.h (__STDC_WANT_IEC_60559_BFP_EXT__): Document.
* manual/arith.texi (issignaling): Document as ISO from TS
18661-1:2014.
(nextup): Likewise.
(nextupf): Likewise.
(nextupl): Likewise.
(nextdown): Likewise.
(nextdownf): Likewise.
(nextdownl): Likewise.
* manual/creature.texi (__STDC_WANT_IEC_60559_BFP_EXT__): Document
macro.
* math/math.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(issignaling): Define if [__GLIBC_USE (IEC_60559_BFP_EXT)], not
[__USE_GNU].
* math/bits/mathcalls.h (nextdown): Declare if
[__GLIBC_USE (IEC_60559_BFP_EXT)], not [__USE_GNU].
(nextup): Likewise.
(__issignaling): Likewise.
Paul E. Murphy [Fri, 1 Jul 2016 18:17:09 +0000 (13:17 -0500)]
Unify drift between _Complex function type variants
While trying to convert the _Complex function wrappers
into a single generic implementation, a few minor
variations between identical versions emerged.
Paul E. Murphy [Fri, 3 Jun 2016 20:44:12 +0000 (15:44 -0500)]
Refactor part of math Makefile
In order to support more types, the Makefile needs a few bits
shuffled.
F is explictly used as a placeholder to substitute for the
appropriate type suffix. This removes the need to demangle
_r suffixed objects.
The variable libm-compat-calls is added to house any objects which
are only built to provide compat symbols within libm. That is,
no newly added type should ever attempt building these. Note,
k_standard* files have been added there. By consensus they are
deprecated; in practice, we haven't gotten there yet.
New types would be added as noted in the comments preceding
type-TYPE-{suffix,routines,yes} variables. However, some manual
additions will still need to be done to add appropriate flags
when building the various variants of libm-test.c for a new type.
Likewise, test-ildoubl is renamed test-ildouble for consistency's
sake.
Paul E. Murphy [Tue, 2 Aug 2016 18:32:06 +0000 (13:32 -0500)]
Remove tacit double usage in ldbl-128
There is quiet truncation to double arithmetic in several
files. I noticed them when building ldbl-128 in a
soft-fp context. This did not change any test results.
Tom Tromey [Wed, 3 Aug 2016 14:26:32 +0000 (16:26 +0200)]
Update and install proc_service.h [BZ #20311]
This adds an include guard and __BEGIN/__END_DECLS to proc_service.h,
removes some extraneous "const"s, and then arranges to install the
header. The idea here is to make it more convenient to implement the
proc_service.h API.
Florian Weimer [Wed, 3 Aug 2016 14:16:57 +0000 (16:16 +0200)]
elf: Do not use memalign for TCB/TLS blocks allocation [BZ #17730]
Instead, call malloc and explicitly align the pointer.
There is no external location to store the original (unaligned)
pointer, and this commit increases the allocation size to store
the pointer at a fixed location relative to the TCB pointer.
The manual alignment means that some space goes unused which
was previously made available for subsequent allocations.
However, in the TLS_DTV_AT_TP case, the manual alignment code
avoids aligning the pre-TCB to the TLS block alignment. (Even
while using memalign, the allocation had some unused padding
in front.)
This concludes the removal of memalign calls from the TLS code,
and the new tst-tls3-malloc test verifies that only core malloc
routines are used.
Florian Weimer [Wed, 3 Aug 2016 14:15:38 +0000 (16:15 +0200)]
elf: Avoid using memalign for TLS allocations [BZ #17730]
Instead of a flag which indicates the pointer can be freed, dtv_t
now includes the pointer which should be freed. Due to padding,
the size of dtv_t does not increase.
To avoid using memalign, the new allocate_dtv_entry function
allocates a sufficiently large buffer so that a sub-buffer
can be found in it which starts with an aligned pointer. Both
the aligned and original pointers are kept, the latter for calling
free later.
Florian Weimer [Wed, 3 Aug 2016 14:11:01 +0000 (16:11 +0200)]
elf: dl-minimal malloc needs to respect fundamental alignment
The dynamic linker currently uses __libc_memalign for TLS-related
allocations. The goal is to switch to malloc instead. If the minimal
malloc follows the ABI fundamental alignment, we can assume that malloc
provides this alignment, and thus skip explicit alignment in a few
cases as an optimization.
It was requested on libc-alpha that MALLOC_ALIGNMENT should be used,
although this results in wasted space if MALLOC_ALIGNMENT is larger
than the fundamental alignment. (The dynamic linker cannot assume
that the non-minimal malloc will provide an alignment of
MALLOC_ALIGNMENT; the ABI provides _Alignof (max_align_t) only.)
sparc64: add a VIS3 version of ceil, floor and trunc
sparc64 passes floating point values in the floating point registers.
As the the generic ceil, floor and trunc functions use integer
instructions, it makes sense to provide a VIS3 version consisting in
the the generic version compiled with -mvis3. GCC will then use
movdtox, movxtod, movwtos and movstow instructions.
sparc32 passes the floating point values in the integer registers, so it
doesn't make sense to do the same.
Aurelien Jarno [Tue, 2 Aug 2016 22:22:44 +0000 (00:22 +0200)]
powerpc: fix ifunc-sel.h fix asm constraints and clobber list
As pointer out on the mailing list, the inline assembly code in
sysdeps/powerpc/ifunc-sel.h doesn't have a list of clobbered registers
and used wrong constraints.
This patch fixes that. I verified it doesn't introduce any change in the
generated code.
Changelog:
* sysdeps/powerpc/ifunc-sel.h (ifunc_sel): Add "11", "12", "cr0" to the
clobber list. Use "i" constraint instead of "X".
(ifunc_one): Add "12" to the clobber list. Use "i" constraint instead
of "X".
Aurelien Jarno [Tue, 2 Aug 2016 22:22:44 +0000 (00:22 +0200)]
powerpc: fix ifunc-sel.h with GCC 6
On 32-bit PowerPC GCC 6 always saves the PIC register on the stack in
the prologue and adjust the stack in the epilogue. It is therefore not
possible anymore to just exit the function in the inline asm code,
otherwise it corrupts the stack pointer. This causes the following tests
to fail when using GCC 6:
Joseph Myers [Tue, 2 Aug 2016 17:40:35 +0000 (17:40 +0000)]
Support __STDC_WANT_LIB_EXT2__ feature test macro.
This patch implements support for the __STDC_WANT_LIB_EXT2__ feature
test macro from ISO/IEC TR 24731-2:2010, thereby implementing one
possible approach for supporting ISO C feature test macros.
Recall that, as described in
<https://sourceware.org/ml/libc-alpha/2016-05/msg00486.html>, these
macros work based on the definition when affected headers are
included, so cannot be handled once when the first system header is
included because that might not be one of the headers the particular
macro in question affects.
<https://sourceware.org/ml/libc-alpha/2016-05/msg00680.html> expresses
views on possible approaches for implementation and
<https://sourceware.org/ml/libc-alpha/2016-06/msg00039.html> follows
up on that.
This patch arranges things so that the relevant condition is
__GLIBC_USE (LIB_EXT2), following one of the suggestions given.
Headers using these macros include <bits/libc-header-start.h>, which
in turn includes <features.h>. Headers must define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION before including
<bits/libc-header-start.h>, to discourage inclusion outside glibc as
requested. __USE_GNU conditions on affected functions are changed to
__GLIBC_USE (LIB_EXT2), while it's added as an additional alternative
on the conditions for functions already enabled for some POSIX
versions.
It would be possible to convert existing __USE_* conditionals to
__GLIBC_USE (with the relevant __GLIBC_USE_* being defined in
<features.h> where __USE_* are presently defined), and so make them
typo-proof (given -Wundef -Werror in glibc builds) because __GLIBC_USE
is used with #if not #ifdef / #if defined.
No attempt is made to enforce the rule about diagnosing different
definitions of __STDC_WANT_LIB_EXT2__ when affected headers are
included; such a diagnostic is incompatible with multiple-include
guards on the affected headers, unless compiler extensions are added
to support it.
As previously noted, glibc does not implement all features from TR
24731-2:2010: the functions aswprintf vaswprintf getwdelim getwline
are not in glibc, although they would be appropriate to add if someone
wished to do so. But I think it makes sense to support the feature
test macro if *any* of the controlled features are present in glibc.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* bits/libc-header-start.h: New file.
* Makefile (headers): Add bits/libc-header-start.h.
* include/features.h (__STDC_WANT_LIB_EXT2__): Document.
(__GLIBC_USE): New macro.
* libio/stdio.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(fmemopen): Declare also if [__GLIBC_USE (LIB_EXT2)].
(open_memstream): Likewise.
(vasprintf): Declare if [__GLIBC_USE (LIB_EXT2)], not [__USE_GNU].
(__asprintf): Likewise.
(asprintf): Likewise.
(__getdelim): Declare also if [__GLIBC_USE (LIB_EXT2)].
(getdelim): Likewise.
(getline): Likewise.
* string/string.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(strdup): Declare also if [__GLIBC_USE (LIB_EXT2)]
(strndup): Likewise.
* wcsmbs/wchar.h: Define
__GLIBC_INTERNAL_STARTING_HEADER_IMPLEMENTATION and include
<bits/libc-header-start.h> instead of including <features.h>.
(open_wmemstream): Declare also if [__GLIBC_USE (LIB_EXT2)].
* manual/creature.texi (__STDC_WANT_LIB_EXT2__): Document macro.
Vector math functions require -ffast-math which sets -ffinite-math-only,
so it is needed to call finite scalar versions (which are called from
vector functions in some cases).
Since finite version of pow() returns qNaN instead of 1.0 for several
inputs, those inputs are excluded for tests of vector math functions.
It is necessary to preserve the invariant that if an arena is
on the free list, it has thread attach count zero. Otherwise,
when arena_thread_freeres sees the zero attach count, it will
add it, and without the invariant, an arena could get pushed
to the list twice, resulting in a cycle.
One possible execution trace looks like this:
Thread 1 examines free list and observes it as empty.
Thread 2 exits and adds its arena to the free list,
with attached_threads == 0).
Thread 1 selects this arena in reused_arena (not from the free list).
Thread 1 increments attached_threads and attaches itself.
(The arena remains on the free list.)
Thread 1 exits, decrements attached_threads,
and adds the arena to the free list.
The final step creates a cycle in the usual way (by overwriting the
next_free member with the former list head, while there is another
list item pointing to the arena structure).
tst-malloc-thread-exit exhibits this issue, but it was only visible
with a debugger because the incorrect fix in bug 19243 removed
the assert from get_free_list.
Aurelien Jarno [Tue, 2 Aug 2016 07:18:59 +0000 (09:18 +0200)]
alpha: fix trunc for big input values
The alpha specific version of trunc and truncf always add and subtract
0x1.0p23 or 0x1.0p52 even for big values. This causes this kind of
errors in the testsuite:
Change this by returning the input value when its absolute value is
greater than 0x1.0p23 or 0x1.0p52. NaN have to go through the add and
subtract operations to get possibly silenced.
Finally remove the code to handle inexact exception, trunc should never
generate such an exception.
Changelog:
* sysdeps/alpha/fpu/s_trunc.c (__trunc): Return the input value
when its absolute value is greater than 0x1.0p52.
[_IEEE_FP_INEXACT] Remove.
* sysdeps/alpha/fpu/s_truncf.c (__truncf): Return the input value
when its absolute value is greater than 0x1.0p23.
[_IEEE_FP_INEXACT] Remove.
Aurelien Jarno [Tue, 2 Aug 2016 07:18:59 +0000 (09:18 +0200)]
alpha: fix rint on sNaN input
The alpha version of rint wrongly return sNaN for sNaN input. Fix that
by checking for NaN and by returning the input value added with itself
in that case.
Changelog:
* sysdeps/alpha/fpu/s_rint.c (__rint): Add argument with itself
when it is a NaN.
* sysdeps/alpha/fpu/s_rintf.c (__rintf): Likewise.
Aurelien Jarno [Tue, 2 Aug 2016 07:18:59 +0000 (09:18 +0200)]
alpha: fix floor on sNaN input
The alpha version of floor wrongly return sNaN for sNaN input. Fix that
by checking for NaN and by returning the input value added with itself
in that case.
Finally remove the code to handle inexact exception, floor should never
generate such an exception.
Changelog:
* sysdeps/alpha/fpu/s_floor.c (__floor): Add argument with itself
when it is a NaN.
[_IEEE_FP_INEXACT] Remove.
* sysdeps/alpha/fpu/s_floorf.c (__floorf): Likewise.
Aurelien Jarno [Tue, 2 Aug 2016 07:18:59 +0000 (09:18 +0200)]
alpha: fix ceil on sNaN input
The alpha version of ceil wrongly return sNaN for sNaN input. Fix that
by checking for NaN and by returning the input value added with itself
in that case.
Finally remove the code to handle inexact exception, ceil should never
generate such an exception.
Changelog:
* sysdeps/alpha/fpu/s_ceil.c (__ceil): Add argument with itself
when it is a NaN.
[_IEEE_FP_INEXACT] Remove.
* sysdeps/alpha/fpu/s_ceilf.c (__ceilf): Likewise.
sparc: remove ceil, floor, trunc sparc specific implementations
The ceil, floor and trunc functions on sparc do not fully follow the
standard and trigger an inexact exception when presented a value which
is not an integer. Since glibc 2.24 this causes a few tests to fail,
for instance:
testing double (without inline functions)
Failure: ceil (lit_pi): Exception "Inexact" set
Failure: ceil (-lit_pi): Exception "Inexact" set
Failure: ceil (min_subnorm_value): Exception "Inexact" set
Failure: ceil (min_value): Exception "Inexact" set
Failure: ceil (0.1): Exception "Inexact" set
Failure: ceil (0.25): Exception "Inexact" set
Failure: ceil (0.625): Exception "Inexact" set
Failure: ceil (-min_subnorm_value): Exception "Inexact" set
Failure: ceil (-min_value): Exception "Inexact" set
Failure: ceil (-0.1): Exception "Inexact" set
Failure: ceil (-0.25): Exception "Inexact" set
Failure: ceil (-0.625): Exception "Inexact" set
I tried to fix that by using the same strategy than used on other
architectures, that is by saving the FSR register at the beginning
and restoring it at the end of the function. When doing so I noticed
a comment that this operation might be very costly, so I decided to
do some benchmarks.
The benchmarks below represent the time required to run each of the
function 60 millions of times with different input value. I have done
that in the basic V9 code, the VIS2 code, and using the default C
implementation of the libc, for both sparc32 and sparc64, on a Niagara
T1 based machine and an UltraSparc IIIi. Given I don't have access to a
more recent machine), I haven't been able to test the VIS3 version. Also
it should be noted that it doesn't make sense to do this benchmark for
V8 or earlier as in that case we use the default C implementation. The
results are available in the table below, the "+ fix" version correspond
to the one saving and restoring the FSR.
The first thing that should be noted is that the C implementation is
always faster on the Niagara T1 based machine. On the UltraSparc IIIi
the float version on sparc32 is also faster.
Coming back about the fix saving and restoring the FSR, it appears
it has a big impact as expected. In that case the C implementation is
always faster than the fixed implementations.
This patch therefore removes the sparc specific implementations in
favor of the generic ones.
H.J. Lu [Wed, 27 Jul 2016 18:51:33 +0000 (11:51 -0700)]
Don't compile do_test with -mavx/-mavx/-mavx512
Don't compile do_test with -mavx, -mavx nor -mavx512 since they won't run
on non-AVX machines.
[BZ #20384]
* sysdeps/x86_64/fpu/Makefile (extra-test-objs): Add
test-double-libmvec-sincos-avx-main.o,
test-double-libmvec-sincos-avx2-main.o,
test-double-libmvec-sincos-main.o,
test-float-libmvec-sincosf-avx-main.o,
test-float-libmvec-sincosf-avx2-main.o and
test-float-libmvec-sincosf-main.o.
test-float-libmvec-sincosf-avx512-main.o.
($(objpfx)test-double-libmvec-sincos): Also link with
$(objpfx)test-double-libmvec-sincos-main.o.
($(objpfx)test-double-libmvec-sincos-avx): Also link with
$(objpfx)test-double-libmvec-sincos-avx-main.o.
($(objpfx)test-double-libmvec-sincos-avx2): Also link with
$(objpfx)test-double-libmvec-sincos-avx2-main.o.
($(objpfx)test-float-libmvec-sincosf): Also link with
$(objpfx)test-float-libmvec-sincosf-main.o.
($(objpfx)test-float-libmvec-sincosf-avx): Also link with
$(objpfx)test-float-libmvec-sincosf-avx2-main.o.
[$(config-cflags-avx512) == yes] (extra-test-objs): Add
test-double-libmvec-sincos-avx512-main.o and
($(objpfx)test-double-libmvec-sincos-avx512): Also link with
$(objpfx)test-double-libmvec-sincos-avx512-main.o.
($(objpfx)test-float-libmvec-sincosf-avx512): Also link with
$(objpfx)test-float-libmvec-sincosf-avx512-main.o.
(CFLAGS-test-double-libmvec-sincos.c): Removed.
(CFLAGS-test-float-libmvec-sincosf.c): Likewise.
(CFLAGS-test-double-libmvec-sincos-main.c): New.
(CFLAGS-test-double-libmvec-sincos-avx-main.c): Likewise.
(CFLAGS-test-double-libmvec-sincos-avx2-main.c): Likewise.
(CFLAGS-test-float-libmvec-sincosf-main.c): Likewise.
(CFLAGS-test-float-libmvec-sincosf-avx-main.c): Likewise.
(CFLAGS-test-float-libmvec-sincosf-avx2-main.c): Likewise.
(CFLAGS-test-float-libmvec-sincosf-avx512-main.c): Likewise.
(CFLAGS-test-double-libmvec-sincos-avx.c): Set to -DREQUIRE_AVX.
(CFLAGS-test-float-libmvec-sincosf-avx.c ): Likewise.
(CFLAGS-test-double-libmvec-sincos-avx2.c): Set to
-DREQUIRE_AVX2.
(CFLAGS-test-float-libmvec-sincosf-avx2.c ): Likewise.
(CFLAGS-test-double-libmvec-sincos-avx512.c): Set to
-DREQUIRE_AVX512F.
(CFLAGS-test-float-libmvec-sincosf-avx512.c): Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos.c: Rewritten.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf.c: Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx-main.c: New
file.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx2-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-avx512-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-double-libmvec-sincos-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx2-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-avx512-main.c:
Likewise.
* sysdeps/x86_64/fpu/test-float-libmvec-sincosf-main.c:
Likewise.
Szabolcs Nagy [Thu, 21 Jul 2016 08:48:45 +0000 (09:48 +0100)]
[AArch64] Update libm-test-ulps
This partly reverts commit f8238ae3c7701dbd9c04028861916de64e578114
that regenerated the ulps, to make the max ulps good for gcc-5,
gcc-6 and gcc-trunk as well.
DJ Delorie [Wed, 20 Jul 2016 21:16:50 +0000 (17:16 -0400)]
Reschedule trace record commits to avoid inversion.
This change decouples "collecting trace data" from "allocating
a trace record" so that the record can be inserted into the
trace buffer in the correct sequence wrt when it "owns" the pointers
being recorded (i.e. malloc should record its event after it does
its allocation, but free should record its event before it returns
the memory to the arena). It splits starting a trace record
(function entry) with committing to the buffer (trace recording)
so that path data can be accumulated easily.
Trace inversion happens when one thread records a malloc, but
before it can actually do the allocation, the kernel schedules
a thread that free's a block, which the malloc later returns.
The events are free->malloc, but the trace records are malloc->free.
Stefan Liebler [Wed, 20 Jul 2016 06:29:43 +0000 (08:29 +0200)]
S390: Do not clobber r13 with memcpy on 31bit with copies >1MB.
If the default memcpy variant is called with a length of >1MB on 31bit,
r13 is clobbered as the algorithm is switching to mvcle. The mvcle code
returns without restoring r13. All other cases are restoring r13.
If memcpy is called from outside libc the ifunc resolver will only select
this variant if running on machines older than z10.
Otherwise or if memcpy is called from inside libc, this default memcpy
variant is called.
The testcase timezone/tst-tzset is triggering this issue in some combinations
of gcc versions and optimization levels.
This patch removes the usage of r13 at all. Thus it is not saved and restored.
The base address for execute-instruction is now stored in r5 which is obtained
after r5 is not needed anymore as 256byte block counter.
ChangeLog:
* sysdeps/s390/s390-32/memcpy.S (memcpy): Eliminate the usage
of r13 as it is not restored in mvcle case.
Mike Frysinger [Tue, 19 Jul 2016 16:09:36 +0000 (21:39 +0530)]
microblaze: fix variable name collision with syscall macros
If a function passes in a variable named "ret", the code will miscompile
when it declares a local ret variable. In some cases, it's even a build
failure like so:
../sysdeps/unix/sysv/linux/spawni.c: In function '__spawni_child':
../sysdeps/unix/sysv/linux/spawni.c:289:5: error: address of register variable 'ret' requested
while (write_not_cancel (p, &ret, sizeof ret) < 0)
DJ Delorie [Tue, 19 Jul 2016 02:24:13 +0000 (22:24 -0400)]
Change trace_run from mmap to read
To avoid huge memory requirements for huge workloads, and unreliable
RSS size due to unmlock'able maps, switch trace_run to a read-as-you-go
design. Data is read per-thread in 4k or 64k chunks (based on workload
size) into a fixed buffer.
H.J. Lu [Mon, 18 Jul 2016 22:16:11 +0000 (15:16 -0700)]
i386: Compile rtld-*.os with -mno-sse -mno-mmx -mfpmath=387
Compile i386 rtld-*.os with -mno-sse -mno-mmx -mfpmath=387 so that no
code in ld.so uses mm/xmm/ymm/zmm registers on i386 since the first 3
mm/xmm/ymm/zmm registers are used to pass vector parameters which must
be preserved.
Fix cos computation for multiple precision fallback (bz #20357)
During the sincos consolidation I made two mistakes, one was a logical
error due to which cos(0x1.8475e5afd4481p+0) returned
sin(0x1.8475e5afd4481p+0) instead.
The second issue was an error in negating inputs for the correct
quadrants for sine. I could not find a suitable test case for this
despite running a program to search for such an input for a couple of
hours.
Following patch fixes both issues. Tested on x86_64. Thanks to Matt
Clay for identifying the issue.
[BZ #20357]
* sysdeps/ieee754/dbl-64/s_sin.c (sloww): Fix up condition
to call __mpsin/__mpcos and to negate values.
* math/auto-libm-test-in: Add test.
* math/auto-libm-test-out: Regenerate.
grp-merge.h was introduced in Stephen Gallagher's patch adding the
"group merging" feature to NSS. It declares two functions, __copy_grp
and __merge_grp, both of which are tagged 'internal_function', which
means that nobody can even compile the contents of the header without
access to libc-symbols.h, which is not installed. (Also, these
functions are GLIBC_PRIVATE exports from libc.so.) Hence I believe
grp-merge.h should not be installed either.
This really needs to be in 2.24, so that no released version of the
library installs this header.
I hope that what I did to the ChangeLog diff will allow it to be
applied without hassle.
* grp/Makefile: Don't install the internal header grp-merge.h.
Carlos O'Donell [Sun, 17 Jul 2016 02:19:03 +0000 (22:19 -0400)]
Enhance the tracer with new data and fixes.
* Increase trace entry to 64-bytes.
The following patch increases the trace entry to 64-bytes, still a
proper multiple of the shared memory window size. While we have doubled
the entry size the on-disk format is still smaller than the ASCII
version. In the future we may wish to add variable sized records, but
for now the simplicity of this method works well.
With the extra bytes we are going to:
- Record internal size information for incoming (free) and outgoing
chunks (malloc, calloc, realloc, etc).
- Simplifies accounting of RSS usage and provides an extra cross check
between malloc<->free based on internal chunk sizes.
- Record alignment information for memalign, and posix_memalign.
- Continues to extend the tracer to the full API.
- Leave 128-bits of padding for future path uses.
- Useful for more path information.
Additionally __MTB_TYPE_POSIX_MEMALIGN is added for the sole purpose of
recording the trace only so that we can hard-fail in the workload
converter when we see such an entry.
Lastly C_MEMALIGN, C_VALLOC, C_PVALLOC, and C_POSIX_MEMALIGN are added
for workload entries for the sake of completeness.
Builds on x86_64, capture looks good and it works.
* Teach trace_dump about the new entries.
The following patch teaches trace_dump about the new posix_memalign
entry. It also teaches trace_dump about the new size2 and size3 fields.
Tested by tracing a program that uses malloc, free, and memalign and
verifying that the extra fields show the expected chunk sizes, and
alignments dumped with trace_dump.
Tested on x86_64 with no apparently problems.
* Teach trace2wl and trace_run about new entries
(a) trace2wl changes:
The following patch teaches trace2wl how to output entries for valloc
and pvalloc, it does so exactly the same way it does for malloc, since
from the perspective of the API they are identical.
Additionally trace2wl is taught how to output an event for memalign,
storing alignment and size in the event record.
Lastly posix_memalign is detected and the converter aborted if it's
seen. It is my opinion that we should not ignore this data during
conversion. If we see a need for it we should implement it later.
(b) trace_run changes:
Some cosmetic cleanup in printing 'pthread_t' which is always an address
of the struct pthread structure in memory, so to make debugging easier
we should print the value as a hex pointer.
Teach the simulator how to run memalign. With the newly recorded
alignment information we double check that the resulting memory is
correctly aligned.
We do not implement valloc and pvalloc, they will abort the simulator.
This is incremental progress.
Tested on x86_64 by converting and running a multithreaded test
application that calls calloc, malloc, free, and memalign.
* Disable recursive traces and save new data.
(a) Adds support for disabling recurisvely recorded traces e.g. realloc
calling malloc no longer produces a realloc and malloc trace event. We
solve this by using a per-thread variable to disable new trace creation,
but allow path bits to be set. This lets us record the code paths
taken, but only record one public API event.
(b) Save internal chunk size information into trace events for all APIs.
The most important is free where we record the free size, this allows
easier tooling to compute running idea RSS values.
Tested on x86_64 with some small applications and test programs.
DJ Delorie [Fri, 15 Jul 2016 22:26:14 +0000 (18:26 -0400)]
Fix NULL return value handling
Decided that a call that returns NULL should be encoded in the
workload but that the simulator should just skip those calls,
rather than skip them in the converter.
This patch changes both the nptl and libc Linux raise implementation
to avoid the issues described in BZ#15368. The strategy used is
summarized in bug report first comment:
1. Block all signals (including internal NPTL ones);
2. Get pid and tid directly from syscall (not relying on cached
values);
3. Call tgkill;
4. Restore old signal mask.
Tested on x86_64 and i686.
[BZ #15368]
* sysdeps/unix/sysv/linux/nptl-signals.h
(__nptl_clear_internal_signals): New function.
(__libc_signal_block_all): Likewise.
(__libc_signal_block_app): Likewise.
(__libc_signal_restore_set): Likewise.
* sysdeps/unix/sysv/linux/pt-raise.c (raise): Use Linux raise.c
implementation.
* sysdeps/unix/sysv/linux/raise.c (raise): Reimplement to not use
the cached pid/tid value in pthread structure.
DJ Delorie [Tue, 12 Jul 2016 00:50:34 +0000 (20:50 -0400)]
Update to new binary file-based trace file.
In order to not lose records, or need to guess ahead of time how
many records you need, this switches to a mmap'd file for the trace
buffer, and grows it as needed.
The trace2dat perl script is replaced with a trace2wl C++ program
that runs a lot faster and can handle the binary format.
H.J. Lu [Tue, 12 Jul 2016 16:21:36 +0000 (09:21 -0700)]
x86-64: Add p{read,write}[v]64 to syscalls.list [BZ #20348]
64-bit off_t in pread64, preadv, pwrite64 and pwritev syscalls is passed
in one 64-bit register for both x32 and x86-64. Since the inline
asm statement only passes long, which is 32-bit for x32, in registers,
64-bit off_t is truncated to 32-bit on x32. Since __ASSUME_PREADV and
__ASSUME_PWRITEV are defined unconditionally, these syscalls can be
implemented in syscalls.list to pass 64-bit off_t in one 64-bit register.
Tested on x86-64 and x32 with off_t > 4GB on pread64/pwrite64 and
preadv64/pwritev64.
[BZ #20348]
* sysdeps/unix/sysv/linux/x86_64/syscalls.list: Add pread64,
preadv64, pwrite64 and pwritev64.
H.J. Lu [Tue, 12 Jul 2016 15:29:06 +0000 (08:29 -0700)]
Test p{read,write}64 with offset > 4GB
Test p{read,write}64 with offset > 4GB. Since it is not an error for a
successful pread/pwrite call to transfer fewer bytes than requested, we
should check if the return value is -1. No need to close and unlink
temporary file, which is handled by test-skeleton.c.
[BZ #20350]
* posix/tst-preadwrite.c: Renamed to ...
* posix/tst-preadwrite-common.c: This.
(PREAD): Removed.
(PWRITE): Likewise.
(STRINGIFY): Likewise.
(STRINGIFY2): Likewise.
(do_prepare): Make it static and remove function arguments.
(do_test): Likewise.
(PREPARE): Updated.
(TEST_FUNCTION): New.
(name): Make it static.
(fd): Likewise.
(do_prepare): Use create_temp_file.
(do_test): Renamed to ...
(do_test_with_offset): This. Make it static and accept offset.
Properly check return value of PWRITE and PREAD. Return bytes
read. Don't close fd nor unlink name.
* posix/tst-preadwrite.c: Rewrite.
* posix/tst-preadwrite64.c: Likewise.
The change is not mature enough because it needs the following fixes:
1. Redirect test output to a file like other tests
2. Eliminate the need to use a .gdbinit because distributions will
break without it. I should have caught that but I was in too much
of a hurry to get the patch in :/
3. Feature checking during configure to determine things like minimum
required gdb version, python-pexpect version, etc. to make sure
that tests work correctly.
projects / thirdparty / glibc.git / log
