Matt Hammerly [Mon, 15 Apr 2024 16:54:38 +0000 (18:54 +0200)]
patch 9.1.0331: make install does not install all files
Problem: make install does not install all files (Nick Jensen)
Solution: Adjust the Makefile rule to install and uninstall cargo and
rust directories (Matt Hammerly)
fixes: #14551
closes: #14552
closes: #14557
Signed-off-by: Matt Hammerly <hammerly.matt@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0329: String interpolation fails for Dict type
Problem: String interpolation fails for Dict type
Solution: Support Dict data type properly, also support :put =Dict
(without having to convert it to string() first)
(Yegappan Lakshmanan)
fixes: #14529
closes: #14541
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI fails with t_?? test
Solution: use assert_match instead of assert_equal
and test only until t_xo, depending on system
there may be several more termcap codes coming
patch 9.1.0326: filetype: some requirements files are not recognized
Problem: filetype: some requirements files are not recognized
Solution: Detect '*-requirements.txt', 'constraints.txt',
'requirements.in', 'requirements/*.txt' and 'requires/*.txt'
as requirements filetype, include pip compiler, include
requirements filetype and syntax plugin
(Wu, Zhenyu, @raimon49)
patch 9.1.0322: filetype: some mail tools not recognized
Problem: filetype: some mail tools not recognized
Solution: Detect '.mbsncrc' as conf, '.msmtprc' as msmtp
and '.notmuch-config' as ini filetype
(Shane-XB-Qian)
closes: #14533
Signed-off-by: shane.xb.qian <shane.qian@foxmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Anton Sharonov [Sun, 14 Apr 2024 18:02:24 +0000 (20:02 +0200)]
patch 9.1.0321: Garbled output on serial terminals with XON/XOFF flow control
Problem: When used terminal with XON/XOFF flow control, vim tries to
still make CTRL-S mapping available, which results in severe
screen corruption, especially on large redraws, and even
spurious inputs (John Tsiombikas)
Solution: Disallow CTRL-S mapping if such terminal is recognized.
Don't remove IXON from the bitmask inversion.
(Anton Sharonov)
*** When started like this:
TERM=vt420 vim
:set termcap
shows "t_xon=y"
map <C-S> :echo "abc"<CR>
does nothing (after <C-S> output freezes and subsequent <C-Q>
unfreezes it)
*** When started like this:
TERM=xterm vim
:set termcap
shows "t_xon="
map <C-S> :echo "abc"<CR>
works (after <C-S> one see "abc" string echo-ed)
fixes: #12674
closes: #14542
Signed-off-by: Anton Sharonov <anton.sharonov@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
- Remove the already commented out and less general in its
definition javaFuncDef alternative.
- Stop recognising some bespoke {p,trace} debugging API.
Non-ASCII identifiers have been supported from the outset
of the Java language.
> An _identifier_ is an unlimited-length sequence of _Java
> letters_ and _Java digits_, the first of which must be a
> Java letter. An identifier cannot have the same spelling
> (Unicode character sequence) as a keyword . . . Boolean
> literal . . . or the null literal . . .
> . . . . . . . .
> Letters and digits may be drawn from the entire Unicode
> character set . . .
> . . . . . . . .
> A Java letter is a character for which the method
> Character.isJavaLetter . . . returns true. A Java
> letter-or-digit is a character for which the method
> Character.isJavaLetterOrDigit . . . returns true.
> . . . . . . . .
> The Java letters include . . . for historical reasons, the
> ASCII underscore (_) . . . and dollar sign ($) . . .
(Separate syntax tests will be written when particular parts
now touched will have been further improved.)
patch 9.1.0318: filetype: translate shell config files are not recognized
Problem: filetype: translate shell config files are not recognized
Solution: Detect 'init.trans', 'translate-shell' and '.trans' files as
clojure (Wu, Zhenyu)
patch 9.1.0316: filetype: some sh and confini files not recognized
Problem: filetype: some sh and confini files not recognized
Solution: Detect neofetch, '.xprofile', XDG-User-Dirs files,
paru and makepkg config files
(Wu, Zhenyu)
patch 9.1.0315: filetype: a few more dosini files are not recognized
Problem: filetype: a few more dosini files are not recognized
Solution: Detect wakatime, reply config files, flatpak, nfs config files
and a few more python tools as dosini (or toml)
(Wu, Zhenyu)
runtime(i3config): Line continuation is not detected for 'set' command (#14531)
Problem: Valid i3config syntax is highlighted as error.
Solution: Skip over line-breaks correctly.
Signed-off-by: Julio B <julio.bacel@gmail.com> Signed-off-by: Josef Litoš <54900518+JosefLitos@users.noreply.github.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0314: Vim9: Can define a class in a function
Problem: Vim9: Can define a class in a function
(Doug Kearns)
Solution: Give an error for a class defined in a function,
slightly reword some public error messages
(Yegappan Lakshmanan)
fixes: #13184
fixes: #13326
closes: #14537
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0313: Crash when using heredoc with comment in command block
Problem: Crash when using heredoc with comment in command block.
Solution: Handle a newline more like the end of the line, fix coverity
warning (zeertzjq).
patch 9.1.0310: Filler lines not checked properly in get_scroll_overlap()
Problem: Filler lines not checked properly in get_scroll_overlap().
Solution: Add missing parentheses (zeertzjq).
The missing parentheses causes the second argument to diff_check_fill()
to always be 0 as it is the result of a comparison between a positive
integer and -1 (the value of BACKWARD), in which case diff_check_fill()
always returns 0 instead of the number of filler lines above a line.
It's very hard to add a test for this, because this mistake at most
leads to 2 screen lines of difference in scrolling behavior, and in
cases where it may indeed lead to a difference in behavior, neither
behavior achieves complete symmetry between CTRL-F and CTRL-B.
closes: #14527
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Overlong translation files may cause repo to become "dirty"
Problem: Overlong translation files may cause repo to become "dirty"
Solution: Add a test into check.vim to warn for lines being longer than
80 virt columns
runtime(vim): Improve Vim9 and legacy-script comment highlighting (#13104)
This is a first-pass attempt to limit matching of Vim9 and legacy-script
comments to the appropriate syntactic contexts.
Vim9-script comments are highlighted at top level in a Vim9-script file,
in all :def functions, and in all :autocmd and :commmand command blocks.
Legacy-script comments are highlighted at top level in a legacy script
file, in all :func functions and in the Vim9-script preamble before the
:vim9script marker command.
Fixes #13047, #11307 and #9587.
Signed-off-by: Doug Kearns <dougkearns@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0299: Vim9: return type not set for a lambda assigned to script var
Problem: Vim9: return type not set for a lambda assigned to script var
(Ernie Rael)
Solution: Correctly determine the return type (Yegappan Lakshmanan)
fixes: #14445
closes: #14473
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0298: MS-Windows: GETTEXT_PATH hard-coded in src/po/Make_mvc.mak
Problem: MS-Windows: GETTEXT_PATH hard-coded in src/po/Make_mvc.mak
Solution: Add IFNDEF/ENDIF around the definition of GETTEXT_PATH
(Cthulhux)
It makes no sense to enforce modifying Vim source files just because
your build stuff is not where it's expected. My change is supposed to
add support for a locally-defined %GETTEXT_PATH%.
closes: #14480
Signed-off-by: Cthulhux <github@tuxproject.de> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0296: regexp: engines do not handle case-folding well
Problem: Regex engines do not handle case-folding well
Solution: Correctly calculate byte length of characters to skip
When the regexp engine compares two utf-8 codepoints case insensitively
it may match an adjacent character, because it assumes it can step over
as many bytes as the pattern contains.
This however is not necessarily true because of case-folding, a
multi-byte UTF-8 character can be considered equal to some single-byte
value.
Let's consider the pattern 'ſ' and the string 's'. When comparing and
ignoring case, the single character 's' matches, and since it matches
Vim will try to step over the match (by the amount of bytes of the
pattern), assuming that since it matches, the length of both strings is
the same.
However in that case, it should only step over the single byte
value 's' so by 1 byte and try to start matching after it again. So for the
backtracking engine we need to ensure:
- we try to match the correct length for the pattern and the text
- in case of a match, we step over it correctly
The same thing can happen for the NFA engine, when skipping to the next
character to test for a match. We are skipping over the regstart
pointer, however we do not consider the case that because of
case-folding we may need to adjust the number of bytes to skip over. So
this needs to be adjusted in find_match_text() as well.
A related issue turned out, when prog->match_text is actually empty. In
that case we should try to find the next match and skip this condition.
patch 9.1.0294: Text height function does not respect it's argument
Problem: plines_m_win() does not take into account it's "limit_winheight"
argument for filler lines below the last line of the buffer.
(after v9.1.0280)
Solution: Check window height when "limit_winheight" is TRUE.
(Luuk van Baal)
closes: #14449
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0293: filetype: lxqt config files are not recognized
Problem: filetype: lxqt config files are not recognized
Solution: Detect {lxqt,screengrab}/*.conf files as dosini,
fix failing filetype test for */tex/latex/**.cfg
(Wu, Zhenyu)
closes: #14450
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0290: filetype: xilinx files are not recognized
Problem: filetype: xilinx files are not recognized
Solution: Add a few xilinx specific file patterns,
inspect lpr files for being xml/pascal
(Wu, Zhenyu)
closes: #14454
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0289: filetype: some TeX files are not recognized
Problem: filetype: some TeX files are not recognized
Solution: Add more patterns for TeX files and inspect
a few more files for being TeX files
(Wu, Zhenyu)
closes: #14456
Signed-off-by: Wu, Zhenyu <wuzhenyu@ustc.edu> Signed-off-by: Christian Brabandt <cb@256bit.org>
Mike Williams [Tue, 9 Apr 2024 20:04:54 +0000 (22:04 +0200)]
patch 9.1.0288: MS-Windows: compiler warning for size_t to int conversion
Problem: MS-Windows: compiler warning for size_t to int conversion
(after v9.1.0282)
Solution: Use size_t instead of int in highlight_set_termgui_attr
(Mike Williams)
closes: #14457
Signed-off-by: Mike Williams <mrmrdubya@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0286: Vim9: E1027 with defcompile for abstract methods
Problem: Vim9: E1027 with defcompile for abstract methods with
non-void return types, but still compiles it
(zzzyxwvut)
Solution: Don't compile abstract methods
(Yegappan Lakshmanan)
fixes: #14443
closes: #14447
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0282: Several small issues in doc and tests
Problem: Wrong doc style for pandoc syntax description,
Test_diff_eob_halfpage() may fail depending on
screen size, using braces in highlight.c when
not necessary
Solution: Fix pandoc documentation, make sure the window
for the test has 7 lines, remove the braces.
patch 9.1.0280: several issues with 'smoothscroll' support
Problem: Logic to make sure cursor is in visible part of the screen after
scrolling the text with 'smoothscroll' is scattered, asymmetric
and contains bugs.
Solution: Adjust and create helper function for 'smoothscroll' cursor logic.
(Luuk van Baal)
closes: #14410
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Mike Williams [Sun, 7 Apr 2024 16:26:22 +0000 (18:26 +0200)]
patch 9.1.0274: MS-Windows: a few compiler warnings
Problem: MS-Windows: a few compiler warnings
Solution: Change variable types to resolve compiler warnings
(Mike Williams)
Windows compiles were reporting a few size_t to signed integer
conversion warnings that can be resolved by changing the variable
declarations to be size_t to start with.
closes: #14429
Signed-off-by: Mike Williams <mrmrdubya@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0272: autocmd may change cwd after :tcd and :lcd
Problem: Autocommand may change currect directory after :tcd and :lcd.
Solution: Also clear tp_localdir and w_localdir when using aucmd_win.
(zeertzjq)
closes: #14435
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
The following is a collection of some small fixes:
- Problem: Vim9: funcref pointer pt leaks, when function is not found
Solution: Free funcref pointer in case of error (fixes: #14254)
- Problem: memory leak of crypt state pointer allocation fails
Solution: free crypt state pointer properly (fixes: #14253)
- Problem: Vim9: Leaking memory when compiling dict fails
Solution: Free the memory in case of error (fixes: #14252)
- Problem: Coverity complains about derefencing obj_members pointer
(after v9.1.0261)
Solution: Verify that obj_members ptr is non-null before accessing it
patch 9.1.0269: Test for TextChanged is still flaky with ASAN
Problem: Test for TextChanged is still flaky with ASAN.
Solution: Don't index the result of readfile().
(zeertzjq)
It turns out that with ASAN the file may become empty during a write
even if it's non-empty both before and after the write, in which case
indexing the result of readfile() will error, so use join() instead.
Also don't delete the file halfway the test, just in case it may cause
errors on the next read.
closes: #14421
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.0267: File name entered in GUI dialog is ignored
Problem: File name entered in GUI dialog is ignored (after v9.1.0265)
Solution: Only set file name to "Untitled" if GUI dialog didn't set it.
(zeertzjq)
closes: #14417
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
projects / thirdparty / vim.git / log
