A future change will move CLANG_FLAGS from KBUILD_{A,C}FLAGS to
KBUILD_CPPFLAGS so that '--target' is available while preprocessing.
When that occurs, the following error appears when building ARCH=mips
with clang (tip of tree error shown):
clang: error: unsupported option '-mabi=' for target 'x86_64-pc-linux-gnu'
Add KBUILD_CPPFLAGS in the CHECKFLAGS invocation to keep everything
working after the move.
When clang's -Qunused-arguments is dropped from KBUILD_CPPFLAGS, it
warns:
clang-16: error: argument unused during compilation: '-mhard-float' [-Werror,-Wunused-command-line-argument]
Similar to commit 84edc2eff827 ("selftest/fpu: avoid clang warning"),
just add this flag to GCC builds. Commit 0f0727d971f6 ("drm/amd/display:
readd -msse2 to prevent Clang from emitting libcalls to undefined SW FP
routines") added '-msse2' to prevent clang from emitting software
floating point routines.
Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case.
Update struct hid_descriptor to better reflect the mandatory and
optional parts of the HID Descriptor as per USB HID 1.11 specification.
Note: the kernel currently does not parse any optional HID class
descriptors, only the mandatory report descriptor.
Update all references to member element desc[0] to rpt_desc.
Add test to verify bLength and bNumDescriptors values are valid.
Replace the for loop with direct access to the mandatory HID class
descriptor member for the report descriptor. This eliminates the
possibility of getting an out-of-bounds fault.
Add a warning message if the HID descriptor contains any unsupported
optional HID class descriptors.
The RODE AI-1 audio interface requires implicit feedback sync between
playback endpoint 0x03 and feedback endpoint 0x84 on interface 3, but
doesn't advertise this in its USB descriptors.
Without this quirk, the device receives audio data but produces no output.
When cross compiling the kernel with clang, we need to override
CLANG_CROSS_FLAGS when preparing the step libraries.
Prior to commit d1d096312176 ("tools: fix annoying "mkdir -p ..." logs
when building tools in parallel"), MAKEFLAGS would have been set to a
value that wouldn't set a value for CLANG_CROSS_FLAGS, hiding the
fact that we weren't properly overriding it.
It is possible for physically contiguous folios to have discontiguous
struct pages if SPARSEMEM is enabled and SPARSEMEM_VMEMMAP is not.
This is correctly handled by folio_page_idx(), so remove this open-coded
implementation.
Ravi reported that the bpf_perf_link_attach() usage of
perf_event_set_bpf_prog() is not serialized by ctx->mutex, unlike the
PERF_EVENT_IOC_SET_BPF case.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lkml.kernel.org/r/20250307193305.486326750@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611111515.1983366-5-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: b05972f01e7d ("net: sched: tbf: don't call qdisc_put() while holding tree lock") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://patch.msgid.link/20250611111515.1983366-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 0c8d13ac9607 ("net: sched: red: delay destroying child qdisc on replace") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611111515.1983366-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock.
Fixes: 7b8e0b6e6599 ("net: sched: prio: delay destroying child qdiscs on change") Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg> Suggested-by: Gerrard Tai <gerrard.tai@starlabs.sg> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20250611111515.1983366-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Previously, a unique tunnel id was added for the matching on TC
non-zero chains, to support inner header rewrite with goto action.
Later, it was used to support VF tunnel offload for vxlan, then for
Geneve and GRE. To support VF tunnel, a temporary mlx5_flow_spec is
used to parse tunnel options. For Geneve, if there is TLV option, a
object is created, or refcnt is added if already exists. But the
temporary mlx5_flow_spec is directly freed after parsing, which causes
the leak because no information regarding the object is saved in
flow's mlx5_flow_spec, which is used to free the object when deleting
the flow.
To fix the leak, call mlx5_geneve_tlv_option_del() before free the
temporary spec if it has TLV object.
Fixes: 521933cdc4aa ("net/mlx5e: Support Geneve and GRE with VF tunnel offload") Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Alex Lazar <alazar@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-9-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When attempting to add a rule to an existing flow group, if a matching
flow group exists but is not active, the error code returned should be
EAGAIN, so that the rule can be added to the matching flow group once
it is active, rather than ENOENT, which indicates that no matching
flow group was found.
Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Gavi Teitz <gavi@nvidia.com> Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-4-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When firmware asks the driver to allocate more pages, using event of
give_pages, the driver should always allocate it from same NUMA, the
original device NUMA. Current code uses dev_to_node() which can result
in different NUMA as it is changed by other driver flows, such as
mlx5_dma_zalloc_coherent_node(). Instead, use saved numa node for
allocating firmware pages.
Fixes: 311c7c71c9bb ("net/mlx5e: Allocate DMA coherent memory on reader NUMA node") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Mark Bloch <mbloch@nvidia.com> Link: https://patch.msgid.link/20250610151514.1094735-2-mbloch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When using and existing adv_info instance for broadcast source it
needs to be updated to periodic first before it can be reused, also in
case the existing instance already have data hci_set_adv_instance_data
cannot be used directly since it would overwrite the existing data so
this reappend the original data after the Broadcast ID, if one was
generated.
Example:
bluetoothctl># Add PBP to EA so it can be later referenced as the BIS ID
bluetoothctl> advertise.service 0x1856 0x00 0x00
bluetoothctl> advertise on
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 13
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x09
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
...
bluetoothctl># Attempt to acquire Broadcast Source transport
bluetoothctl>transport.acquire /org/bluez/hci0/pac_bcast0/fd0
...
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 255
Handle: 0x01
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x0e
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID: 11371620 (0xad8464)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0000
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Link: https://github.com/bluez/bluez/issues/1117 Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The len parameter is considered optional so it can be NULL so it cannot
be used for skipping to next entry of EIR_SERVICE_DATA.
Fixes: 8f9ae5b3ae80 ("Bluetooth: eir: Add helpers for managing service data") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation.
Fixes: 080bb352fad00 ("net: phy: Maintain MDIO device and bus statistics") Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com> Reported-by: Wenjing Shan <wenjing.shan@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When performing a C22 operation, check that the bus driver actually
provides the methods, and return -EOPNOTSUPP if not. C45 only busses
do exist, and in future their C22 methods will be NULL.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 0e629694126c ("net/mdiobus: Fix potential out-of-bounds read/write access") Signed-off-by: Sasha Levin <sashal@kernel.org>
According to 802.1AE standard, when ES and SC flags in TCI are zero,
used SCI should be the current active SC_RX. Current code uses the
header MAC address. Without this patch, when ES flag is 0 (using a
bridge or switch), header MAC will not fit the SCI and MACSec frames
will be discarted.
In order to test this issue, MACsec link should be stablished between
two interfaces, setting SC and ES flags to zero and a port identifier
different than one. For example, using ip macsec tools:
ip link add link $ETH0 macsec0 type macsec port 11 send_sci off
end_station off
ip macsec add macsec0 tx sa 0 pn 2 on key 01 $ETH1_KEY
ip macsec add macsec0 rx port 11 address $ETH1_MAC
ip macsec add macsec0 rx port 11 address $ETH1_MAC sa 0 pn 2 on key 02
ip link set dev macsec0 up
ip link add link $ETH1 macsec1 type macsec port 11 send_sci off
end_station off
ip macsec add macsec1 tx sa 0 pn 2 on key 01 $ETH0_KEY
ip macsec add macsec1 rx port 11 address $ETH0_MAC
ip macsec add macsec1 rx port 11 address $ETH0_MAC sa 0 pn 2 on key 02
ip link set dev macsec1 up
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Co-developed-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de> Signed-off-by: Andreu Montiel <Andreu.Montiel@technica-engineering.de> Signed-off-by: Carlos Fernandez <carlos.fernandez@technica-engineering.de> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
sk->sk_prot->sock_is_readable is a valid function pointer when sk resides
in a sockmap. After the last sk_psock_put() (which usually happens when
socket is removed from sockmap), sk->sk_prot gets restored and
sk->sk_prot->sock_is_readable becomes NULL.
This makes sk_is_readable() racy, if the value of sk->sk_prot is reloaded
after the initial check. Which in turn may lead to a null pointer
dereference.
Ensure the function pointer does not turn NULL after the check.
Fixes: 8934ce2fd081 ("bpf: sockmap redirect ingress support") Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250609-skisreadable-toctou-v1-1-d0dfb2d62c37@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
With nosmp in cmdline, other CPUs are not brought up, leaving
their cpc_desc_ptr NULL. CPU0's iteration via for_each_possible_cpu()
dereferences these NULL pointers, causing panic.
Panic backtrace:
[ 0.401123] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b8
...
[ 0.403255] [<ffffffff809a5818>] cppc_allow_fast_switch+0x6a/0xd4
...
Kernel panic - not syncing: Attempted to kill init!
Fixes: 3cc30dd00a58 ("cpufreq: CPPC: Enable fast_switch") Reported-by: Xu Lu <luxu.kernel@bytedance.com> Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com> Link: https://patch.msgid.link/20250604023036.99553-1-cuiyunhui@bytedance.com
[ rjw: New subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a VFLR interrupt is received during a VF reset initiated from a
different source, the VFLR may be not fully handled. This can
leave the VF in an undefined state.
To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR
handling if the reset is not yet complete. This ensures the driver
will properly complete the VF reset in such scenarios.
Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Robert Malz <robert.malz@canonical.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function i40e_vc_reset_vf attempts, up to 20 times, to handle a
VF reset request, using the return value of i40e_reset_vf as an indicator
of whether the reset was successfully triggered. Currently, i40e_reset_vf
always returns true, which causes new reset requests to be ignored if a
different VF reset is already in progress.
This patch updates the return value of i40e_reset_vf to reflect when
another VF reset is in progress, allowing the caller to properly use
the retry mechanism.
Fixes: 52424f974bc5 ("i40e: Fix VF hang when reset is triggered on another VF") Signed-off-by: Robert Malz <robert.malz@canonical.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 1017560164b6 ("drm/meson: use unsigned long long / Hz for
frequency types") attempts to resolve video playback using 59.94Hz.
using YUV420 by changing the clock calculation to use
Hz instead of kHz (thus yielding more precision).
The basic calculation itself is correct, however the comparisions in
meson_vclk_vic_supported_freq() and meson_vclk_setup() don't work
anymore for 59.94Hz modes (using the freq * 1000 / 1001 logic). For
example, drm/edid specifies a 593407kHz clock for 3840x2160@59.94Hz.
With the mentioend commit we convert this to Hz. Then meson_vclk
tries to find a matchig "params" entry (as the clock setup code
currently only supports specific frequencies) by taking the venc_freq
from the params and calculating the "alt frequency" (used for the
59.94Hz modes) from it, which is:
(594000000Hz * 1000) / 1001 = 593406593Hz
Similar calculation is applied to the phy_freq (TMDS clock), which is 10
times the pixel clock.
Implement a new meson_vclk_freqs_are_matching_param() function whose
purpose is to compare if the requested and calculated frequencies. They
may not match exactly (for the reasons mentioned above). Allow the
clocks to deviate slightly to make the 59.94Hz modes again.
Fixes: 1017560164b6 ("drm/meson: use unsigned long long / Hz for frequency types") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250609202751.962208-1-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
meson_vclk_vic_supported_freq() has a debug print which includes the
pixel freq. However, within the whole function the pixel freq is
irrelevant, other than checking the end of the params array. Switch to
printing the vclk_freq which is being compared / matched against the
inputs to the function to avoid confusion when analyzing error reports
from users.
Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250606221031.3419353-1-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The "phy" and "vclk" frequency labels were swapped, making it more
difficult to debug driver errors. Swap the label order to make them
match with the actual frequencies printed to correct this.
Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250606203729.3311592-1-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The video clock requested by the drm framework is 593407kHz. This is
passed by meson_encoder_hdmi_atomic_enable() to
meson_encoder_hdmi_set_vclk() and the following formula is applied:
- the frequency is halved (which would be 296703.5kHz) and rounded down
to the next full integer, which is 296703kHz
- TMDS clock is calculated (296703kHz * 10)
- video encoder clock is calculated - this needs to match a table from
meson_vclk.c and so it doubles the previously halved value again
(resulting in 593406kHz)
- meson_vclk_setup() can't find (either directly, or by deriving it from
594000kHz * 1000 / 1001 and rounding to the closest integer value -
which is 593407kHz as originally requested by the drm framework) a
matching clock in it's internal table and errors out with "invalid
HDMI vclk freq"
Fix the division precision by switching the whole meson driver to use
unsigned long long (64-bit) Hz values for clock frequencies instead of
unsigned int (32-bit) kHz to fix the rouding error.
The user space calls mmap() to map VAS window paste address
and the kernel returns the complete mapped page for each
window. So return -EINVAL if non-zero is passed for offset
parameter to mmap().
See Documentation/arch/powerpc/vas-api.rst for mmap()
restrictions.
Co-developed-by: Jonathan Greental <yonatan02greental@gmail.com> Signed-off-by: Jonathan Greental <yonatan02greental@gmail.com> Reported-by: Jonathan Greental <yonatan02greental@gmail.com> Fixes: dda44eb29c23 ("powerpc/vas: Add VAS user space API") Signed-off-by: Haren Myneni <haren@linux.ibm.com> Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250610021227.361980-2-maddy@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
memtrace mmap issue has an out of bounds issue. This patch fixes the by
checking that the requested mapping region size should stay within the
allocated region size.
SFQ has an assumption of always being able to queue at least one packet.
However, after the blamed commit, sch->q.len can be inflated by packets
in sch->gso_skb, and an enqueue() on an empty SFQ qdisc can be followed
by an immediate drop.
Fix sfq_drop() to properly clear q->tail in this situation.
Tested:
ip netns add lb
ip link add dev to-lb type veth peer name in-lb netns lb
ethtool -K to-lb tso off # force qdisc to requeue gso_skb
ip netns exec lb ethtool -K in-lb gro on # enable NAPI
ip link set dev to-lb up
ip -netns lb link set dev in-lb up
ip addr add dev to-lb 192.168.20.1/24
ip -netns lb addr add dev in-lb 192.168.20.2/24
tc qdisc replace dev to-lb root sfq limit 100
scsi_host_put() is not required when shost is NULL, so jumping to the
correct label avoids unnecessary operations. These functions previously
jumped to the wrong goto label (put_host), which did not match the
intended cleanup logic.
Use the correct exit labels (exit_new_fnode, exit_del_fnode, etc.) to
ensure proper error handling. Also remove the unused put_host label
under iscsi_new_flashnode() as it is no longer needed.
No functional changes beyond accurate error path correction.
Fixes: c6a4bb2ef596 ("[SCSI] scsi_transport_iscsi: Add flash node mgmt support") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://lore.kernel.org/r/20250530193012.3312911-1-alok.a.tiwari@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
if ath11k_crypto_mode is invalid (not ATH11K_CRYPT_MODE_SW/ATH11K_CRYPT_MODE_HW),
ath11k_core_qmi_firmware_ready() will not undo some actions that was previously
started/configured. Do the validation as soon as possible in order to avoid
undoing actions in that case and also to fix the following smatch warning:
For WMI_REQUEST_VDEV_STAT request, firmware might split response into
multiple events dut to buffer limit, hence currently in
ath11k_debugfs_fw_stats_process() we wait until all events received.
In case there is no vdev started, this results in that below condition
would never get satisfied
Currently ath11k_debugfs_fw_stats_process() is using static variables to count
firmware stat events. Taking num_vdev as an example, if for whatever reason (
say ar->num_started_vdevs is 0 or firmware bug etc.) the following condition
(++num_vdev) == total_vdevs_started
is not met, is_end is not set thus num_vdev won't be cleared. Next time when
firmware stats is requested again, even if everything is working fine, we will
fail due to the condition above will never be satisfied.
The same applies to num_bcn as well.
Change to use non-static counters so that we have a chance to clear them each
time firmware stats is requested. Currently only ath11k_fw_stats_request() and
ath11k_debugfs_fw_stats_request() are requesting firmware stats, so clear
counters there.
This is because, if for whatever reason ar->fw_stats_done is not set by
ath11k_update_stats_event(), ath11k_debugfs_fw_stats_request() won't yield
CPU before an up to 3s timeout.
Change to completion mechanism to avoid CPU burning.
Commit b35108a51cf7 ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
Currently the soc_dp_stats debugfs file has the following permissions:
-rw------- 1 root root 0 Mar 4 15:04 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats
However this file does not actually support write operations -- no .write()
method is registered. Therefore use the correct permissions when creating
the file.
After the change:
-r-------- 1 root root 0 Mar 4 15:15 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats
In ath10k_snoc_hif_stop() we skip disabling the IRQs in the crash
recovery flow, but we still unconditionally call enable again in
ath10k_snoc_hif_start().
We can't check the ATH10K_FLAG_CRASH_FLUSH bit since it is cleared
before hif_start() is called, so instead check the
ATH10K_SNOC_FLAG_RECOVERY flag and skip enabling the IRQs during crash
recovery.
This fixes unbalanced IRQ enable splats that happen after recovering from
a crash.
Fixes: 0e622f67e041 ("ath10k: add support for WCN3990 firmware crash recovery") Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Tested-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Link: https://patch.msgid.link/20250318205043.1043148-1-caleb.connolly@linaro.org Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no disagreement that we should check both ptp->is_virtual_clock
and ptp->n_vclocks to check if the ptp virtual clock is in use.
However, when we acquire ptp->n_vclocks_mux to read ptp->n_vclocks in
ptp_vclock_in_use(), we observe a recursive lock in the call trace
starting from n_vclocks_store().
============================================
WARNING: possible recursive locking detected
6.15.0-rc6 #1 Not tainted
--------------------------------------------
syz.0.1540/13807 is trying to acquire lock: ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_vclock_in_use drivers/ptp/ptp_private.h:103 [inline] ffff888035a24868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
ptp_clock_unregister+0x21/0x250 drivers/ptp/ptp_clock.c:415
but task is already holding lock: ffff888030704868 (&ptp->n_vclocks_mux){+.+.}-{4:4}, at:
n_vclocks_store+0xf1/0x6d0 drivers/ptp/ptp_sysfs.c:215
other info that might help us debug this:
Possible unsafe locking scenario:
The best way to solve this is to remove the logic that checks
ptp->n_vclocks in ptp_vclock_in_use().
The reason why this is appropriate is that any path that uses
ptp->n_vclocks must unconditionally check if ptp->n_vclocks is greater
than 0 before unregistering vclocks, and all functions are already
written this way. And in the function that uses ptp->n_vclocks, we
already get ptp->n_vclocks_mux before unregistering vclocks.
Therefore, we need to remove the redundant check for ptp->n_vclocks in
ptp_vclock_in_use() to prevent recursive locking.
Fixes: 73f37068d540 ("ptp: support ptp physical/virtual clocks conversion") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://patch.msgid.link/20250520160717.7350-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This reworks MGMT_OP_REMOVE_ADV_MONITOR to not use mgmt_pending_add to
avoid crashes like bellow:
==================================================================
BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_complete+0xe5/0x540 net/bluetooth/mgmt.c:5406
Read of size 8 at addr ffff88801c53f318 by task kworker/u5:5/5341
ufshcd_err_handling_prepare() calls ufshcd_rpm_get_sync(). The latter
function can only succeed if UFSHCD_EH_IN_PROGRESS is not set because
resuming involves submitting a SCSI command and ufshcd_queuecommand()
returns SCSI_MLQUEUE_HOST_BUSY if UFSHCD_EH_IN_PROGRESS is set. Fix this
hang by setting UFSHCD_EH_IN_PROGRESS after ufshcd_rpm_get_sync() has
been called instead of before.
The early_console_setup() function initializes sci_ports[0].port with an
object of type struct uart_port obtained from the struct earlycon_device
passed as an argument to early_console_setup().
Later, during serial port probing, the serial port used as earlycon
(e.g., port A) might be remapped to a different position in the sci_ports[]
array, and a different serial port (e.g., port B) might be assigned to slot
0. For example:
sci_ports[0] = port B
sci_ports[X] = port A
In this scenario, the new port mapped at index zero (port B) retains the
data associated with the earlycon configuration. Consequently, after the
Linux boot process, any access to the serial port now mapped to
sci_ports[0] (port B) will block the original earlycon port (port A).
To address this, introduce an early_console_exit() function to clean up
sci_ports[0] when earlycon is exited.
To prevent the cleanup of sci_ports[0] while the serial device is still
being used by earlycon, introduce the struct sci_port::probing flag and
account for it in early_console_exit().
Relocate the runtime PM enable operation to sci_probe_single(). This change
prepares the codebase for upcoming fixes.
While at it, replace the existing logic with a direct call to
devm_pm_runtime_enable() and remove sci_cleanup_single(). The
devm_pm_runtime_enable() function automatically handles disabling runtime
PM during driver removal.
On the Renesas RZ/G3S, when doing suspend to RAM, the uart_suspend_port()
is called. The uart_suspend_port() calls 3 times the
struct uart_port::ops::tx_empty() before shutting down the port.
According to the documentation, the struct uart_port::ops::tx_empty()
API tests whether the transmitter FIFO and shifter for the port is
empty.
The Renesas RZ/G3S SCIFA IP reports the number of data units stored in the
transmit FIFO through the FDR (FIFO Data Count Register). The data units
in the FIFOs are written in the shift register and transmitted from there.
The TEND bit in the Serial Status Register reports if the data was
transmitted from the shift register.
In the previous code, in the tx_empty() API implemented by the sh-sci
driver, it is considered that the TX is empty if the hardware reports the
TEND bit set and the number of data units in the FIFO is zero.
According to the HW manual, the TEND bit has the following meaning:
0: Transmission is in the waiting state or in progress.
1: Transmission is completed.
It has been noticed that when opening the serial device w/o using it and
then switch to a power saving mode, the tx_empty() call in the
uart_port_suspend() function fails, leading to the "Unable to drain
transmitter" message being printed on the console. This is because the
TEND=0 if nothing has been transmitted and the FIFOs are empty. As the
TEND=0 has double meaning (waiting state, in progress) we can't
determined the scenario described above.
Add a software workaround for this. This sets a variable if any data has
been sent on the serial console (when using PIO) or if the DMA callback has
been called (meaning something has been transmitted). In the tx_empty()
API the status of the DMA transaction is also checked and if it is
completed or in progress the code falls back in checking the hardware
registers instead of relying on the software variable.
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de> Fixes: 29fd0ec2bdbe ("Input: synaptics-rmi4 - add support for F34 device reflash") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The two alarm LEDs of on the uDPU board are stopped working since
commit 78efa53e715e ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge
GPIO controller. These pins are part of the 'spi_quad' pin group
for which the 'spi' function is selected via the default pinctrl
state of the 'spi' node. This is wrong however, since in order to
allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected
first by the pinctrl core before probing the spi driver, but then
it gets overridden to 'gpio' implicitly via the
devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the
SPI subsystem, so the function of the pin group remains 'spi'
which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is
that the pinctrl state definition is wrong since its initial commit 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins'
node to 'gpio' and move the pinctrl state definition from the
'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1 Fixes: 0d45062cfc89 ("arm64: dts: marvell: Add device tree for uDPU board") Signed-off-by: Gabor Juhos <j4g8y7@gmail.com> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The error checking for of_count_phandle_with_args() does not handle
negative error codes correctly. The problem is that "index" is a u32 so
in the condition "if (index >= num_domains)" negative error codes stored
in "num_domains" are type promoted to very high positive values and
"index" is always going to be valid.
Test for negative error codes first and then test if "index" is valid.
Fixes: 3ccf3f0cd197 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If growfsrt is run on a filesystem that doesn't have a rt volume, it's
possible to change the rt extent size. If the root directory was
previously set up with an inherited extent size hint and rtinherit, it's
possible that the hint is no longer a multiple of the rt extent size.
Although the verifiers don't complain about this, xfs_repair will, so if
we detect this situation, log the root directory to clean it up. This
is still racy, but it's better than nothing.
Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bug:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 0 3' /mnt
[root@fedora ~]#
Normally, we should be able to get one record, but we got nothing.
The root cause of this problem lies in the incorrect setting of rm_owner in
the rmap query. In the case of the initial query where the owner is not
set, __xfs_getfsmap_datadev() first sets info->high.rm_owner to ULLONG_MAX.
This is done to prevent any omissions when comparing rmap items. However,
if the current ag is detected to be the last one, the function sets info's
high_irec based on the provided key. If high->rm_owner is not specified, it
should continue to be set to ULLONG_MAX; otherwise, there will be issues
with interval omissions. For example, consider "start" and "end" within the
same block. If high->rm_owner == 0, it will be smaller than the founded
record in rmapbt, resulting in a query with no records. The main call stack
is as follows:
xfs_ioc_getfsmap
xfs_getfsmap
xfs_getfsmap_datadev_rmapbt
__xfs_getfsmap_datadev
info->high.rm_owner = ULLONG_MAX
if (pag->pag_agno == end_ag)
xfs_fsmap_owner_to_rmap
// set info->high.rm_owner = 0 because fmr_owner == -1ULL
dest->rm_owner = 0
// get nothing
xfs_getfsmap_datadev_rmapbt_query
The problem can be resolved by simply modify the xfs_fsmap_owner_to_rmap
function internal logic to achieve.
After applying this patch, the above problem have been solved:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 0 3' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [0..7]: static fs metadata 0 (0..7) 8
Fixes: e89c041338ed ("xfs: implement the GETFSMAP ioctl") Signed-off-by: Zizhi Wo <wozizhi@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a file has the S_DAX flag (aka fsdax access mode) set, we cannot
allow users to change the realtime flag unless the datadev and rtdev
both support fsdax access modes. Even if there are no extents allocated
to the file, the setattr thread could be racing with another thread
that has already started down the write code paths.
Fixes: ba23cba9b3bdc ("fs: allow per-device dax status checking for filesystems") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It turns out that I misunderstood the difference between the attr and
attr2 feature bits. "attr" means that at some point an attr fork was
created somewhere in the filesystem. "attr2" means that inodes have
variable-sized forks, but says nothing about whether or not there
actually /are/ attr forks in the system.
If we have an attr fork, we only need to check that attr is set.
Fixes: 99d9d8d05da26 ("xfs: scrub inode block mappings") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry
to make sure don't stray beyond valid memory region. Before patching, the
loop simply checks that the start offset of the dup and dep is within the
range. So in a crafted image, if last entry is xfs_dir2_data_unused, we
can change dup->length to dup->length-1 and leave 1 byte of space. In the
next traversal, this space will be considered as dup or dep. We may
encounter an out of bound read when accessing the fixed members.
In the patch, we make sure that the remaining bytes large enough to hold
an unused entry before accessing xfs_dir2_data_unused and
xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make
sure that the remaining bytes large enough to hold a dirent with a
single-byte name before accessing xfs_dir2_data_entry.
Signed-off-by: lei lu <llfamsec@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Create a new helper function to calculate the fundamental allocation
unit (i.e. the smallest unit of space we can allocate) of a file.
Things are going to get hairy with range-exchange on the realtime
device, so prepare for this now.
Remove the static attribute from xfs_is_falloc_aligned since the next
patch will need it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Move the two public symbols in xfs_file.c to xfs_file.h. We're about to
add more public symbols in that source file, so let's finally create the
header file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ 6.1: resolved conflicts in xfs_inode.c and xfs_symlink.c due to 6.1
not having switched to idmap yet ]
I noticed that callers of xfs_qm_vop_dqalloc use the following code to
compute the anticipated uid of the new file:
mapped_fsuid(idmap, &init_user_ns);
whereas the VFS uses a slightly different computation for actually
assigning i_uid:
mapped_fsuid(idmap, i_user_ns(inode));
Technically, these are not the same things. According to Christian
Brauner, the only time that inode->i_sb->s_user_ns != &init_user_ns is
when the filesystem was mounted in a new mount namespace by an
unpriviledged user. XFS does not allow this, which is why we've never
seen bug reports about quotas being incorrect or the uid checks in
xfs_qm_vop_create_dqattach tripping debug assertions.
However, this /is/ a logic bomb, so let's make the code consistent.
Link: https://lore.kernel.org/linux-fsdevel/20240617-weitblick-gefertigt-4a41f37119fa@brauner/ Fixes: c14329d39f2d ("fs: port fs{g,u}id helpers to mnt_idmap") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com> Acked-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This inode log item recovery failing the dinode verifier after
replaying the contents of the inode log item into the ondisk inode.
Looking back into what the kernel was doing at the time of the fs
shutdown, a thread was in the middle of running a series of
transactions, each of which committed changes to the inode.
At some point in the middle of that chain, an invalid (at least
according to the verifier) change was committed. Had the filesystem not
shut down in the middle of the chain, a subsequent transaction would
have corrected the invalid state and nobody would have noticed. But
that's not what happened here. Instead, the invalid inode state was
committed to the ondisk log, so log recovery tripped over it.
The actual defect here was an overzealous inode verifier, which was
fixed in a separate patch. This patch adds some transaction precommit
functions for CONFIG_XFS_DEBUG=y mode so that we can detect these kinds
of transient errors at transaction commit time, where it's much easier
to find the root cause.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Chinner reported that xfs/273 fails if the AG size happens to be an
exact power of two. I traced this to an agbno integer overflow when the
current GETFSMAP call is a continuation of a previous GETFSMAP call, and
the last record returned was non-shareable space at the end of an AG.
__xfs_getfsmap_datadev sets up a data device query by converting the
incoming fmr_physical into an xfs_fsblock_t and cracking it into an agno
and agbno pair. In the (failing) case of where fmr_blockcount of the
low key is nonzero and the record was for a non-shareable extent, it
will add fmr_blockcount to start_fsb and info->low.rm_startblock.
If the low key was actually the last record for that AG, then this
addition causes info->low.rm_startblock to point beyond EOAG. When the
rmapbt range query starts, it'll return an empty set, and fsmap moves on
to the next AG.
Or so I thought. Remember how we added to start_fsb?
If agsize < 1<<agblklog, start_fsb points to the same AG as the original
fmr_physical from the low key. We run the rmapbt query, which returns
nothing, so getfsmap zeroes info->low and moves on to the next AG.
If agsize == 1<<agblklog, start_fsb now points to the next AG. We run
the rmapbt query on the next AG with the excessively large
rm_startblock. If this next AG is actually the last AG, we'll set
info->high to EOFS (which is now has a lower rm_startblock than
info->low), and the ranged btree query code will return -EINVAL. If
it's not the last AG, we ignore all records for the intermediate AGs.
Oops.
Fix this by decoding start_fsb into agno and agbno only after making
adjustments to start_fsb. This means that info->low.rm_startblock will
always be set to a valid agbno, and we always start the rmapbt iteration
in the correct AG.
While we're at it, fix the predicate for determining if an fsmap record
represents non-shareable space to include file data on pre-reflink
filesystems.
Reported-by: Dave Chinner <david@fromorbit.com> Fixes: 63ef7a35912dd ("xfs: fix interval filtering in multi-step fsmap queries") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use struct initializers to ensure that the xfs_btree_irecs passed into
the query_range function are completely initialized. No functional
changes, just closing some sloppy hygiene.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Improve the validation of the fsmap offset fields in the query keys and
move the validation to the top of the function now that we have pushed
the low key adjustment code downwards.
Also fix some indenting issues that aren't worth a separate patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The external log device fsmap backend doesn't have an rmapbt to query,
so it's wasteful to spend time initializing the rmap_irec objects.
Worse yet, the log could (someday) be longer than 2^32 fsblocks, so
using the rmap irec structure will result in integer overflows.
Fix this mess by computing the start address that we want from keys[0]
directly, and use the daddr-based record filtering algorithm that we
also use for rtbitmap queries.
Fixes: e89c041338ed ("xfs: implement the GETFSMAP ioctl") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The rtbitmap fsmap backend doesn't query the rmapbt, so it's wasteful to
spend time initializing the rmap_irec objects. Worse yet, the logic to
query the rtbitmap is spread across three separate functions, which is
unnecessarily difficult to follow.
Compute the start rtextent that we want from keys[0] directly and
combine the functions to avoid passing parameters around everywhere, and
consolidate all the logic into a single function. At one point many
years ago I intended to use __xfs_getfsmap_rtdev as the launching point
for realtime rmapbt queries, but this hasn't been the case for a long
time.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The realtime section ends at the last rt extent. If the user configures
the rt geometry with an extent size that is not an integer factor of the
number of rt blocks, it's possible for there to be rt blocks past the
end of the last rt extent. These tail blocks cannot ever be allocated
and will cause corruption reports if the last extent coincides with the
end of an rt bitmap block, so do not report consider them for the
GETFSMAP output.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's not correct to use the rmap irec structure to hold query key
information to query the rtbitmap because the realtime volume can be
longer than 2^32 fsblocks in length. Because the rt volume doesn't have
allocation groups, introduce a daddr-based record filtering algorithm
and compute the rtextent values using 64-bit variables. The same
problem exists in the external log device fsmap implementation, so use
the same solution to fix it too.
After this patch, all the code that touches info->low and info->high
under xfs_getfsmap_logdev and __xfs_getfsmap_rtdev are unnecessary.
Cleaning this up will be done in subsequent patches.
Fixes: 4c934c7dd60c ("xfs: report realtime space information via the rtbitmap") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
That's not right -- we asked what block maps block 208, and we should've
received a mapping for inode 137 offset 16. Instead, we get nothing.
The root cause of this problem is a mis-interaction between the fsmap
code and how btree ranged queries work. xfs_btree_query_range returns
any btree record that overlaps with the query interval, even if the
record starts before or ends after the interval. Similarly, GETFSMAP is
supposed to return a recordset containing all records that overlap the
range queried.
However, it's possible that the recordset is larger than the buffer that
the caller provided to convey mappings to userspace. In /that/ case,
userspace is supposed to copy the last record returned to fmh_keys[0]
and call GETFSMAP again. In this case, we do not want to return
mappings that we have already supplied to the caller. The call to
xfs_btree_query_range is the same, but now we ignore any records that
start before fmh_keys[0].
Unfortunately, we didn't implement the filtering predicate correctly.
The predicate should only be called when we're calling back for more
records. Accomplish this by setting info->low.rm_blockcount to a
nonzero value and ensuring that it is cleared as necessary. As a
result, we no longer want to adjust dkeys[0] in the main setup function
because that's confusing.
This patch doesn't touch the logdev/rtbitmap backends because they have
bigger problems that will be addressed by subsequent patches.
Found via xfs/556 with parent pointers enabled.
Fixes: e89c041338ed ("xfs: implement the GETFSMAP ioctl") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com> Acked-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure that propagation settings can only be changed for mounts located
in the caller's mount namespace. This change aligns permission checking
with the rest of mount(2).
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 07b20889e305 ("beginning of the shared-subtree proper") Reported-by: "Orlando, Noah" <Noah.Orlando@deshaw.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
9ffb14ef61ba "move_mount: allow to add a mount into an existing group"
breaks assertions on ->mnt_share/->mnt_slave. For once, the data structures
in question are actually documented.
Documentation/filesystem/sharedsubtree.rst:
All vfsmounts in a peer group have the same ->mnt_master. If it is
non-NULL, they form a contiguous (ordered) segment of slave list.
do_set_group() puts a mount into the same place in propagation graph
as the old one. As the result, if old mount gets events from somewhere
and is not a pure event sink, new one needs to be placed next to the
old one in the slave list the old one's on. If it is a pure event
sink, we only need to make sure the new one doesn't end up in the
middle of some peer group.
"move_mount: allow to add a mount into an existing group" ends up putting
the new one in the beginning of list; that's definitely not going to be
in the middle of anything, so that's fine for case when old is not marked
shared. In case when old one _is_ marked shared (i.e. is not a pure event
sink), that breaks the assumptions of propagation graph iterators.
Put the new mount next to the old one on the list - that does the right thing
in "old is marked shared" case and is just as correct as the current behaviour
if old is not marked shared (kudos to Pavel for pointing that out - my original
suggested fix changed behaviour in the "nor marked" case, which complicated
things for no good reason).
Reviewed-by: Christian Brauner <brauner@kernel.org> Fixes: 9ffb14ef61ba ("move_mount: allow to add a mount into an existing group") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
The procedure handling IPC timeouts and EXCEPTION_CAUGHT notification
shall cancel any D0IX work before proceeding with DSP recovery. If
SET_D0IX called from delayed_work is the failing IPC the procedure will
deadlock. Conditionally skip cancelling the work to fix that.
Fixes: 335c4cbd201d ("ASoC: Intel: avs: D0ix power state support") Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://patch.msgid.link/20250530141025.2942936-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
RPM manipulation in hda_codec_probe_complete()'s error path is
superfluous and leads to RPM usage count underflow if the
build-controls operation fails.
hda_codec_probe_complete() is called in:
1) hda_codec_probe() for all non-HDMI codecs
2) in card->late_probe() for HDMI codecs
Error path for hda_codec_probe() takes care of bus' RPM already.
For 2) if late_probe() fails, ASoC performs card cleanup what
triggers hda_codec_remote() - same treatment is in 1).
The kernel currently validates that the length of the provided nexthop
address does not exceed the specified length. This can lead to the
kernel reading uninitialized memory if user space provided a shorter
length than the specified one.
Fix by validating that the provided length exactly matches the specified
one.
Fixes: d1df6fd8a1d2 ("ipv6: sr: define core operations for seg6local lightweight tunnel") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20250604113252.371528-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Enable threaded NAPI by default for WireGuard devices in response to low
performance behavior that we observed when multiple tunnels (and thus
multiple wg devices) are deployed on a single host. This affects any
kind of multi-tunnel deployment, regardless of whether the tunnels share
the same endpoints or not (i.e., a VPN concentrator type of gateway
would also be affected).
The problem is caused by the fact that, in case of a traffic surge that
involves multiple tunnels at the same time, the polling of the NAPI
instance of all these wg devices tends to converge onto the same core,
causing underutilization of the CPU and bottlenecking performance.
This happens because NAPI polling is hosted by default in softirq
context, but the WireGuard driver only raises this softirq after the rx
peer queue has been drained, which doesn't happen during high traffic.
In this case, the softirq already active on a core is reused instead of
raising a new one.
As a result, once two or more tunnel softirqs have been scheduled on
the same core, they remain pinned there until the surge ends.
In our experiments, this almost always leads to all tunnel NAPIs being
handled on a single core shortly after a surge begins, limiting
scalability to less than 3× the performance of a single tunnel, despite
plenty of unused CPU cores being available.
The proposed mitigation is to enable threaded NAPI for all WireGuard
devices. This moves the NAPI polling context to a dedicated per-device
kernel thread, allowing the scheduler to balance the load across all
available cores.
On our 32-core gateways, enabling threaded NAPI yields a ~4× performance
improvement with 16 tunnels, increasing throughput from ~13 Gbps to
~48 Gbps. Meanwhile, CPU usage on the receiver (which is the bottleneck)
jumps from 20% to 100%.
We have found no performance regressions in any scenario we tested.
Single-tunnel throughput remains unchanged.
Commit 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete
set on errors") caused power.is_suspended to be set for devices with
power.direct_complete set, but it forgot to ensure the clearing of that
flag for them in device_resume(), so power.is_suspended is still set for
them during the next system suspend-resume cycle.
If that cycle is aborted in dpm_suspend(), the subsequent invocation of
dpm_resume() will trigger a device_resume() call for every device and
because power.is_suspended is set for the devices in question, they will
not be skipped by device_resume() as expected which causes scary error
messages to be logged (as appropriate).
To address this issue, move the clearing of power.is_suspended in
device_resume() immediately after the power.is_suspended check so it
will be always cleared for all devices processed by that function.
Fixes: 03f1444016b7 ("PM: sleep: Fix handling devices with direct_complete set on errors") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4280 Reported-and-tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/4990586.GXAFRqVoOG@rjwysocki.net Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 3d010c8031e3 ("udp: do not accept non-tunnel GSO skbs landing
in a tunnel") added checks in linux stack to not accept non-tunnel
GRO packets landing in a tunnel. This exposed an issue in vmxnet3
which was not correctly reporting GRO packets for tunnel packets.
This patch fixes this issue by setting correct GSO type for the
tunnel packets.
Currently, vmxnet3 does not support reporting inner fields for LRO
tunnel packets. The issue is not seen for egress drivers that do not
use skb inner fields. The workaround is to enable tnl-segmentation
offload on the egress interfaces if the driver supports it. This
problem pre-exists this patch fix and can be addressed as a separate
future patch.
Fixes: dacce2be3312 ("vmxnet3: add geneve and vxlan tunnel offload support") Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com> Acked-by: Guolin Yang <guolin.yang@broadcom.com> Link: https://patch.msgid.link/20250530152701.70354-1-ronak.doshi@broadcom.com
[pabeni@redhat.com: dropped the changelog] Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit a1e40ac5b5e9 ("net: gso: fix udp gso fraglist segmentation after
pull from frag_list") detected invalid geometry in frag_list skbs and
redirects them from skb_segment_list to more robust skb_segment. But some
packets with modified geometry can also hit bugs in that code. We don't
know how many such cases exist. Addressing each one by one also requires
touching the complex skb_segment code, which risks introducing bugs for
other types of skbs. Instead, linearize all these packets that fail the
basic invariants on gso fraglist skbs. That is more robust.
If only part of the fraglist payload is pulled into head_skb, it will
always cause exception when splitting skbs by skb_segment. For detailed
call stack information, see below.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify fraglist skbs, breaking these invariants.
In extreme cases they pull one part of data into skb linear. For UDP,
this causes three payloads with lengths of (11,11,10) bytes were
pulled tail to become (12,10,10) bytes.
The skbs no longer meets the above SKB_GSO_FRAGLIST conditions because
payload was pulled into head_skb, it needs to be linearized before pass
to regular skb_segment.
Fixes: a1e40ac5b5e9 ("gso: fix udp gso fraglist segmentation after pull from frag_list") Signed-off-by: Shiming Cheng <shiming.cheng@mediatek.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The stmmac platform drivers that do not open-code the clk_ptp_rate value
after having retrieved the default one from the device-tree can end up
with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will
eventually propagate up to PTP initialization when bringing up the
interface, leading to a divide by 0:
Division by zero in kernel.
CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a #22
Hardware name: STM32 (Device Tree Support)
Call trace:
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x6c/0x8c
dump_stack_lvl from Ldiv0_64+0x8/0x18
Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4
stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c
stmmac_hw_setup from __stmmac_open+0x18c/0x434
__stmmac_open from stmmac_open+0x3c/0xbc
stmmac_open from __dev_open+0xf4/0x1ac
__dev_open from __dev_change_flags+0x1cc/0x224
__dev_change_flags from dev_change_flags+0x24/0x60
dev_change_flags from ip_auto_config+0x2e8/0x11a0
ip_auto_config from do_one_initcall+0x84/0x33c
do_one_initcall from kernel_init_freeable+0x1b8/0x214
kernel_init_freeable from kernel_init+0x24/0x140
kernel_init from ret_from_fork+0x14/0x28
Exception stack(0xe0815fb0 to 0xe0815ff8)
Prevent this division by 0 by adding an explicit check and error log
about the actual issue. While at it, remove the same check from
stmmac_ptp_register, which then becomes duplicate
Fixes: 19d857c9038e ("stmmac: Fix calculations for ptp counters when clock input = 50Mhz.") Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Yanteng Si <si.yanteng@linux.dev> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20250529-stmmac_tstamp_div-v4-1-d73340a794d5@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementation of the Tx scheduler allows the tree to be
rebuilt as the user adds more Tx queues to the VSI. In such a case,
additional child nodes are added to the tree to support the new number
of queues.
Unfortunately, this algorithm does not take into account that the limit
of the VSI support node may be exceeded, so an additional node in the
VSI layer may be required to handle all the requested queues.
Such a scenario occurs when adding XDP Tx queues on machines with many
CPUs. Although the driver still respects the queue limit returned by
the FW, the Tx scheduler was unable to add those queues to its tree
and returned one of the errors below.
Such a scenario occurs when adding XDP Tx queues on machines with many
CPUs (e.g. at least 321 CPUs, if there is already 128 Tx/Rx queue pairs).
Although the driver still respects the queue limit returned by the FW,
the Tx scheduler was unable to add those queues to its tree and returned
the following errors:
Failed VSI LAN queue config for XDP, error: -5
or:
Failed to set LAN Tx queue context, error: -22
Fix this problem by extending the tree rebuild algorithm to check if the
current VSI node can support the requested number of queues. If it
cannot, create as many additional VSI support nodes as necessary to
handle all the required Tx queues. Symmetrically, adjust the VSI node
removal algorithm to remove all nodes associated with the given VSI.
Also, make the search for the next free VSI node more restrictive. That is,
add queue group nodes only to the VSI support nodes that have a matching
VSI handle.
Finally, fix the comment describing the tree update algorithm to better
reflect the current scenario.
Fixes: b0153fdd7e8a ("ice: update VSI config dynamically") Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com> Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current implementation of the Tx scheduler tree attempts
to create nodes for all Tx queues, ignoring the fact that some
queues may already exist in the tree. For example, if the VSI
already has 128 Tx queues and the user requests for 16 new queues,
the Tx scheduler will compute the tree for 272 queues (128 existing
queues + 144 new queues), instead of 144 queues (128 existing queues
and 16 new queues).
Fix that by modifying the node count calculation algorithm to skip
the queues that already exist in the tree.
Fixes: 5513b920a4f7 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support") Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Kubiak <michal.kubiak@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com> Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Depending on the security set the response to L2CAP_LE_CONN_REQ shall be
just L2CAP_CR_LE_ENCRYPTION if only encryption when BT_SECURITY_MEDIUM
is selected since that means security mode 2 which doesn't require
authentication which is something that is covered in the qualification
test L2CAP/LE/CFC/BV-25-C.
Link: https://github.com/bluez/bluez/issues/1270 Fixes: 27e2d4c8d28b ("Bluetooth: Add basic LE L2CAP connect request receiving support") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
