IH is not working after switching a new gpu index for the first time.
During VM resume, QEMU programming of VF MSIX table (register GFXMSIX_VECT0_ADDR_LO)
may not work.The access could be blocked by nBIF protection as VF isn't in
exclusive access mode. Exclusive access is enabled now, disable/enable MSIX
so that QEMU reprograms MSIX table.
call amdgpu_restore_msix on resume to restore msix table.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com> Acked-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samuel Zhang [Fri, 11 Apr 2025 08:19:09 +0000 (16:19 +0800)]
drm/amdgpu: enable pdb0 for hibernation on SRIOV
When switching to new GPU index after hibernation and then resume,
VRAM offset of each VRAM BO will be changed, and the cached gpu
addresses needed to updated.
This is to enable pdb0 and switch to use pdb0-based virtual gpu
address by default in amdgpu_bo_create_reserved(). since the virtual
addresses do not change, this can avoid the need to update all
cached gpu addresses all over the codebase.
Signed-off-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samuel Zhang [Fri, 11 Apr 2025 08:10:20 +0000 (16:10 +0800)]
drm/amdgpu: update GPU addresses for SMU and PSP
add amdgpu_bo_fb_aper_addr() and update the cached GPU addresses to use
the FB aperture address for SMU and PSP.
2 reasons for this change:
1. when pdb0 is enabled, gpu addr from amdgpu_bo_create_kernel() is GART
aperture address, it is not compatible with SMU and PSP, it need to be
updated to use FB aperture address.
2. Since FB aperture address will change after switching to new GPU
index after hibernation, it need to be updated on resume.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jesse.Zhang [Thu, 29 May 2025 03:27:37 +0000 (11:27 +0800)]
drm/amdkfd: move SDMA queue reset capability check to node_show
Relocate the per-SDMA queue reset capability check from
kfd_topology_set_capabilities() to node_show() to ensure we read the
latest value of sdma.supported_reset after all IP blocks are initialized.
Fixes: ceb7114c961b ("drm/amdkfd: flag per-sdma queue reset supported to user space") Reviewed-by: Jonathan Kim <jonathan.kim@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samuel Zhang [Fri, 11 Apr 2025 07:59:34 +0000 (15:59 +0800)]
drm/amdgpu: update xgmi info and vram_base_offset on resume
For SRIOV VM env with XGMI enabled systems, XGMI physical node id may
change when hibernate and resume with different VF.
Update XGMI info and vram_base_offset on resume for gfx444 SRIOV env.
Add amdgpu_virt_xgmi_migrate_enabled() as the feature flag.
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com> Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Mon, 26 May 2025 19:47:08 +0000 (14:47 -0500)]
drm/amd/display: Promote DAL to 3.2.336
This version brings along following fixes:
- Fix brightness relevant settings
- Fix calling blanking stream twice
- Extend dc mode validation types to support more scenarios
- Update DMCUB loading sequence for DCN3.5
Acked-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yan Li [Wed, 14 May 2025 15:54:49 +0000 (11:54 -0400)]
drm/amd/display: replace fast_validate with enum dc_validate_mode
[Why]
The boolean fast_validate is used as an
input parameter in multiple functions. To
support more scenarios, we are
replacing it with enum dc_validate_mode.
[How]
The enum dc_validate_mode introduces three
possible values:
1) DC_VALIDATE_MODE_AND_PROGRAMMING:
Apply the mode to hardware
2) DC_VALIDATE_MODE_ONLY:
Check whether the mode can be supported
3) DC_VALIDATE_MODE_AND_STATE_INDEX:
Check if the mode can be supported, and
determine the optimal voltage level
needed to support it.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Yan Li <yan.li@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Update DMCUB loading sequence for DCN3.5
[Why]
New sequence from HW for reset and firmware reloading has been
provided that aims to stabilize the reload sequence in the case the
firmware is hung or has outstanding requests.
[How]
Update the sequence to remove the DMUIF reset and the redundant
writes in the release.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Sun, 18 May 2025 17:37:53 +0000 (12:37 -0500)]
drm/amd/display: Promote DAL to 3.2.335
This version brings along following fixes:
- Fixes for DML21
- Support OLED SDR with AMD ABC
- Indirect buffer transport for FAMS2 commands
- Correct non-OLED pre_T11_delay
- Optime boot-up consuming time
- Add support for 2nd sharpening range
- Fix on chroma planes scaling
Acked-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Sun, 18 May 2025 15:28:38 +0000 (11:28 -0400)]
drm/amd/display: [FW Promotion] Release 0.1.12.0
Add dmub command to support LSDMA
Acked-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ray Wu [Thu, 8 May 2025 09:51:11 +0000 (17:51 +0800)]
drm/amd/display: Move vmalloc include to header file
[Why & How]
Move vmalloc.h include code to header file.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samson Tam [Fri, 9 May 2025 15:19:28 +0000 (11:19 -0400)]
drm/amd/display: Add support for 2nd sharpening range
[Why & How]
Add support for 2nd sharpening range for cases where we want
override existing DCN sharpening range
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Do not bypass chroma scaling in 1:1 case
[Why]
When doing 2:1 downscaling on a YUV sub-sampled format, the chroma
scaling ratio is 1:1. Since chroma has cositing, it is needed to do
scaling on the chroma plane(s) and not to bypass chroma scaling.
[How]
Do not set the chroma taps to one when the chroma ratio is identity
and the input format is a sub-sampled YUV format.
Reviewed-by: Samson Tam <samson.tam@amd.com> Signed-off-by: Navid Assadian <Navid.Assadian@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oleh Kuzhylnyi [Wed, 14 May 2025 12:21:15 +0000 (14:21 +0200)]
drm/amd/display: Add DML path for FAMS methods
[Why]
DML needs a path for FAMS methods.
[How]
Apply instance of fams2_stream_sub_params_v2 structure with
a FAMS placeholder for DML.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jingwen Zhu [Thu, 8 May 2025 03:19:49 +0000 (11:19 +0800)]
drm/amd/display: Add disconnect case on dongle check
[why]
In the case of an external monitor disconnection,
the kernel mode will attempt to post new timing
validation with two path counts (eDP + external
monitor removed to virtual).
[how]
Skip validating color depth and pixel encoding in the
scenario involving a DP to HDMI active converter dongle.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Jingwen Zhu <Jingwen.Zhu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wayne Lin [Tue, 13 May 2025 08:06:50 +0000 (16:06 +0800)]
drm/amd/display: Avoid trying AUX transactions on disconnected ports
[Why & How]
Observe that we try to access DPCD 0x600h of disconnected DP ports.
In order not to wasting time on retrying these ports, call
dpcd_write_rx_power_ctrl() after checking its connection status.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The `drm_*()` print macros will handle including the driver in the print
already. The extra print of the word `amdgpu` is unnecessary.
[How]
Modify all prints to drop `amdgpu: `.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Oleh Kuzhylnyi [Thu, 24 Apr 2025 12:40:09 +0000 (14:40 +0200)]
drm/amd/display: Indirect buffer transport for FAMS2 commands
[Why]
The quantity and duration of FAMS2 commands are set to increase
in future products. This necessitates the implementation of a new
mechanism for chaining commands together, allowing all commands
to be processed within a single transaction.
[How]
The indirect buffer acts as a shared buffer on the driver side,
mapped to DMUB's internal CW7 address. Its source address and
size are sent through mailbox command to DMUB, triggering the
transaction.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yihan Zhu [Wed, 7 May 2025 18:25:07 +0000 (14:25 -0400)]
drm/amd/display: move RMCM programming
[WHY & HOW]
Move only RMCM programming outside of dcn401. Extended HW
definition in dc for memory layout to extend support.
Reviewed-by: Jun Lei <jun.lei@amd.com> Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Camille Cho [Wed, 7 May 2025 11:00:54 +0000 (19:00 +0800)]
drm/amd/display: Support OLED SDR with AMD ABC
[Why]
Nits programming for SDR panel is only supported by VESA ABC.
[How]
1. Loose nits programming for OLED SDR panel with AMD ABC.
2. We support two ABC methods. Disable one before we program the other
in case panel freaks out.
3. Update HDR judgement in setBR with a solider condition.
Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Store state related info inside mode_lib.
- Fix bad DCFCLK deep sleep
- Update FAMS structure in DMUB header
Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alvin Lee [Tue, 13 May 2025 19:00:47 +0000 (15:00 -0400)]
drm/amd/display: Re-order FAMS2 sub commands
[Why & How]
New enums need to be added to the end to avoid
back compat issues.
Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Taimur Hassan [Mon, 12 May 2025 00:18:48 +0000 (20:18 -0400)]
drm/amd/display: [FW Promotion] Release 0.1.11.0
Refactoring some DMUB related structs and enum.
Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC and AC levels are advertised in a percentage, not a luminance.
[How]
Scale DC and AC levels to supported values.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4221 Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add debugging message for brightness caps
[Why]
Default BIOS brightness caps are buried in ACPI.
[How]
Add extra dynamic debug that can show default brightness caps.
Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cruise Hung [Thu, 22 May 2025 10:02:14 +0000 (18:02 +0800)]
drm/amd/display: Use DC log instead of using DM error msg
[Why & How]
It sent an error msg when it failed to read the DP tunneling DPCD field.
This should just be a warning msg. Use a DC log instead of a DM error msg.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Cruise Hung <Cruise.Hung@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We've made fix for garbage in dcn31_reset_back_end_for_pipe(), adding
blank_stream() before disable_crtc(). And set_dpms_off() will call
blank_stream() again.
[How]
Add flag to avoid calling blank_stream() twice.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhongwei Zhang [Tue, 13 May 2025 08:45:59 +0000 (16:45 +0800)]
drm/amd/display: Correct non-OLED pre_T11_delay.
[Why]
Only OLED panels require non-zero pre_T11_delay defaultly.
Others should be controlled by power sequence.
[How]
For non OLED, pre_T11_delay delay in code should be zero.
Also post_T7_delay.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add userq fence support to SDMAv7.0.
- GFX12's user fence irq src id differs from GFX11's,
hence we need create a new irq srcid header file for GFX12.
User fence irq src id information-
GFX11 and SDMA6.0 - 0x43
GFX12 and SDMA7.0 - 0x46
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Fri, 23 May 2025 16:09:52 +0000 (19:09 +0300)]
drm/amdgpu: Fix integer overflow in amdgpu_gem_add_input_fence()
The "num_syncobj_handles" is a u32 value that comes from the user via the
ioctl. On 32bit systems the "sizeof(uint32_t) * num_syncobj_handles"
multiplication can have an integer overflow. Use size_mul() to fix that.
Fixes: 38c67ec9aa4b ("drm/amdgpu: Add input fence to sync bo map/unmap") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Fri, 23 May 2025 16:05:58 +0000 (19:05 +0300)]
drm/amdgpu: Fix integer overflow issues in amdgpu_userq_fence.c
This patch only affects 32bit systems. There are several integer
overflows bugs here but only the "sizeof(u32) * num_syncobj"
multiplication is a problem at runtime. (The last lines of this patch).
These variables are u32 variables that come from the user. The issue
is the multiplications can overflow leading to us allocating a smaller
buffer than intended. For the first couple integer overflows, the
syncobj_handles = memdup_user() allocation is immediately followed by
a kmalloc_array():
In that situation the kmalloc_array() works as a bounds check and we
haven't accessed the syncobj_handlesp[] array yet so the integer overflow
is harmless.
But the "num_syncobj" multiplication doesn't have that and the integer
overflow could lead to an out of bounds access.
Fixes: a292fdecd728 ("drm/amdgpu: Implement userqueue signal/wait IOCTL") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Tue, 27 May 2025 14:13:31 +0000 (10:13 -0400)]
drm/amdgpu: disable workload profile switching when OD is enabled
Users have reported that they have to reduce the level of undervolting
to acheive stability when dynamic workload profiles are enabled on
GC 10.3.x. Disable dynamic workload profiles if the user has enabled
OD.
Vitaly Prosyak [Tue, 6 May 2025 20:45:33 +0000 (16:45 -0400)]
drm/amdgpu/gfx10: Refine Cleaner Shader for GFX10.1.10
This patch updates the cleaner shader, which is responsible for
initializing GPU resources such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs). Changes include adjustments to register clearing and shader
configuration.
- Updated GPU resource initialization addresses in the cleaner shader
from `be803080` to `be803000`.
- Simplified the logic in the SGPR clearing section, ensuring all SGPRs
are set to zero.
Fixes: 25961bad9212 ("drm/amdgpu/gfx10: Add cleaner shader for GFX10.1.10") Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Manu Rastogi <manu.rastogi@amd.com> Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xuemei Liu [Thu, 29 May 2025 02:25:11 +0000 (10:25 +0800)]
drm/amdkfd: enable kfd on RISCV systems
KFD has been confirmed that can run on RISCV systems. It's necessary to
support CONFIG_HSA_AMD on RISCV.
Signed-off-by: Xuemei Liu <liu.xuemei1@zte.com.cn> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lang Yu [Fri, 23 May 2025 02:04:54 +0000 (10:04 +0800)]
drm/amdkfd: Map wptr BO to GART unconditionally
For simulation C models that don't run CP FW where adev->mes.sched_version
is not populated correctly. This causes NULL dereference in
amdgpu_amdkfd_free_gtt_mem(dev->adev, (void **)&pqn->q->wptr_bo_gart)
and warning on unpinned BO in amdgpu_bo_gpu_offset(q->properties.wptr_bo).
Compared with adding version check here and there,
always map wptr BO to GART simplifies things.
v2: Add NULL check in amdgpu_amdkfd_free_gtt_mem.(Philip)
Signed-off-by: Lang Yu <lang.yu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'struct timing_generator_funcs' are not modified in these drivers.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Wentao Liang [Mon, 26 May 2025 02:37:31 +0000 (10:37 +0800)]
drm/amd/display: Add null pointer check for get_first_active_display()
The function mod_hdcp_hdcp1_enable_encryption() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference in
mod_hdcp_hdcp2_enable_encryption().
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.
Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # v5.8
Yifan Zhang [Wed, 21 May 2025 10:06:28 +0000 (18:06 +0800)]
amd/amdkfd: fix a kfd_process ref leak
This patch is to fix a kfd_prcess ref leak.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sunday Clement [Fri, 23 May 2025 21:49:50 +0000 (17:49 -0400)]
drm/amdkfd: Identical code for different branches
This patch removes the if/else statement in the
cik_event_interrupt_wq function because it is redundant
with both branches resulting in identical outcomes,
this improves code readibility.
Asad Kamal [Wed, 21 May 2025 11:17:50 +0000 (19:17 +0800)]
drm/amd/pm: Optimize get gpu metrics data function
Optimize get gpu metrics data function for smu_v13_0_12 to
allocate metrics structure only once
v2: Free and alloc moved to same function(Kevin)
Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
V3: drop changes where readbacks have implemented. This patch set
is to add readbacks only.
V2: use common register UVD_STATUS for readback (standard PCI MMIO
behavior, i.e. readback post all writes to let the writes hit
the hardware)
add readback in ..._stop() for more coverage.
Similar to the changes made for VCN v4.0.5 where readback to post the
writes to avoid race with the doorbell, the addition of register
readback support in other VCN versions is intended to prevent potential
race conditions, even though such issues have not been observed yet.
This change ensures consistency across different VCN variants and helps
avoid similar issues. The overhead introduced is negligible.
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com> Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Aurabindo Pillai [Wed, 21 May 2025 20:05:39 +0000 (16:05 -0400)]
Revert "drm/amd/display: more liberal vmin/vmax update for freesync"
This reverts commit cfb2d41831ee5647a4ae0ea7c24971a92d5dfa0d since it
causes regressions on certain configs. Revert until the issue can be
isolated and debugged.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4238 Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
Aurabindo Pillai [Wed, 21 May 2025 19:59:56 +0000 (15:59 -0400)]
drm/amd/display: Add some missing register headers for DCN401
Add some HDCP related register headers for future use.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pratap Nirujogi [Sun, 9 Mar 2025 20:53:01 +0000 (16:53 -0400)]
drm/amd/amdgpu: Add GPIO resources required for amdisp
ISP is a child device to GFX, and its device specific information
is not available in ACPI. Adding the 2 GPIO resources required for
ISP_v4_1_1 in amdgpu_isp driver.
- GPIO 0 to allow sensor driver to enable and disable sensor module.
- GPIO 85 to allow ISP driver to enable and disable ISP RGB streaming mode.
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The IS_DGFX check was put in place because error capture of buffer
objects is expected to be broken on devices with VRAM.
Userspace fix[1] to the impacted media driver has been submitted, merged
and a new driver release is out as 25.2.3 where the capture flag is
dropped on DG1 thus unblocking the usage of media driver on DG1.
Imre Deak [Tue, 20 May 2025 14:22:19 +0000 (17:22 +0300)]
drm/i915/dp: Fix the enabling/disabling of audio SDP splitting
Adjust the enabling/disabling steps of the DP audio SDP splitting
according to a recent Bspec update. This moves the enabling to the audio
codec enable sequence after the transcoder is enabled and disables SDP
splitting explicitly during the audio disable sequence.
Bspec requires waiting for a vblank event after the transcoder is
enabled and before SDP splitting is enabled. There is no need for an
explicit wait for this, since after the transcoder is enabled this
vblank event is guaranteed to have happened via a flip done wait (see
intel_atomic_commit_tail() -> drm_atomic_helper_wait_for_flip_done()).
The bspec update is for LNL+ only, but the HW team clarified that this
has been always the intended sequence on all platforms and bspec will be
updated everywhere accordingly.
The way SDP splitting was originally enabled matched the version of
bspec at that time. Adding here the Fixes: line still, since this
change fixes a FIFO underrun on PTL during output enabling when DSC is
enabled.
Bspec: 49283, 68943 Fixes: 8853750dbad8 ("drm/i915: Enable SDP split for DP2.0") Cc: Vinod Govindapillai <vinod.govindapillai@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://lore.kernel.org/r/20250520142219.1688401-1-imre.deak@intel.com
(cherry picked from commit 56764c845aa5be14cd53702fc9f2da23e25857de) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Dan Carpenter [Fri, 23 May 2025 16:07:58 +0000 (19:07 +0300)]
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
The nvkm_device_tegra_resource() function returns a mix of error pointers
and NULL. The callers only expect it to return NULL on error. Change it
to only return NULL.
Dave Airlie [Fri, 23 May 2025 21:43:11 +0000 (07:43 +1000)]
Merge tag 'drm-intel-next-fixes-2025-05-22' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Fix for Thunderbolt sink disconnect on MTL/ARL/LNL
- Fix for DDI port clock select mask on PTL+
- Add error checks for alloc_ordered_workqueue() and alloc_workqueue() in display
Aradhya Bhatia [Fri, 16 May 2025 14:19:02 +0000 (14:19 +0000)]
drm/xe/guc: Make creation of SLPC debugfs files conditional
Platforms that do not support SLPC are exempted from the GuC PC support.
The GuC PC does not get initialized, and neither do its BOs get created.
This causes a problem because the GuC PC debugfs file is still being
created. Whenever the file is attempted to read, it causes a NULL
pointer dereference on the supposed BO of the GuC PC.
So, make the creation of SLPC debugfs files conditional to when SLPC
features are supported.
Fixes: aaab5404b16f ("drm/xe: Introduce GuC PC debugfs") Suggested-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Aradhya Bhatia <aradhya.bhatia@intel.com> Link: https://lore.kernel.org/r/20250516141902.5614-1-aradhya.bhatia@intel.com Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 17486cf3df5320752cc67ee8bcb2379d1b9de76c) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Revert "drm/amd: Keep display off while going into S4"
commit 68bfdc8dc0a1a ("drm/amd: Keep display off while going into S4")
attempted to keep displays off during the S4 sequence by not resuming
display IP. This however leads to hangs because DRM clients such as the
console can try to access registers and cause a hang.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4155 Fixes: 68bfdc8dc0a1a ("drm/amd: Keep display off while going into S4") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250522141328.115095-1-mario.limonciello@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To unmap and free seq64 memory when drm node close to free vm, if there
is signal accepted, then taking vm lock failed and leaking seq64 va
mapping, and then dmesg has error log "still active bo inside vm".
Change to use uninterruptible lock fix the mapping leaking and no dmesg
error log.
Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: no 3D and blnd LUT as DPP color caps for DCN401
Match what is declared as DPP color caps with hw caps. DCN401 has MPC
shaper + 3D LUTs that are movable before and after blending (get from
plane or stream), but no DPP blend LUTs.
Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Melissa Wen [Tue, 13 May 2025 21:38:17 +0000 (18:38 -0300)]
drm/amd/display: only collect data if debug gamut_remap is available
Color gamut_remap state log may be not available for some hw versions,
so prevent null pointer dereference by checking if there is a function
to collect data for this hw version.
Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tvrtko Ursulin [Mon, 19 May 2025 16:37:12 +0000 (17:37 +0100)]
drm/amdgpu: Remove duplicated "context still alive" check
When amdgpu_ctx_mgr_fini() calls amdgpu_ctx_mgr_entity_fini() it contains
the exact same "context still alive" check as it will do next. Remove the
duplicated copy.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tvrtko Ursulin [Mon, 19 May 2025 16:37:11 +0000 (17:37 +0100)]
drm/amdgpu: Make amdgpu_ctx_mgr_entity_fini static
Function amdgpu_ctx_mgr_entity_fini() only has a single local caller so
lets make it local.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lijo Lazar [Fri, 16 May 2025 14:46:57 +0000 (20:16 +0530)]
drm/amd/pm: Use external link order for xgmi data
xgmi_port_num interface reports external link number for port number. To
be consistent, use the external link number for reporting other XGMI
link data also.
v2: For invalid link number return -EINVAL (Kevin)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Yang Wang <kevinyang.wang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / thirdparty / kernel / linux.git / log
