Fix skinny to recognise vmexten in general section of conf
Fixup the vmexten so if globally set in general section will be honored by
chan_skinny. Also get rid of the 'global_' part of variable name to match
regexten.
Make generate_exchange_uuid() always return the passed ast_str pointer.
I changed this code earlier to return NULL if it wasn't able to generate a UUID,
whereas the earlier code would always return the ast_str that was passed in.
Switch back to returning the ast_str, only set it to the empty string instead if
UUID generation fails. We still do a validity check later which will catch this
and blow up if necessary.
................
r378001 | wedhorn | 2012-12-13 15:25:31 -0600 (Thu, 13 Dec 2012) | 9 lines
Minor fixes for chan_skinny
Whitespace, change SUBSTATE_ONHOOK to correct SKINNY_ONHOOK and
correct len of 2 strcmp in skinny_setdebug(). (see opticron's review
on https://reviewboard.asterisk.org/r/2240/)
........
Merged revisions 377991 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378002 | rmudgett | 2012-12-13 15:28:15 -0600 (Thu, 13 Dec 2012) | 35 lines
confbridge: Fix MOH on simultaneous user entry to a new conference.
When two users entered a new conference simultaneously, one of the callers
hears MOH. This happened if two unmarked users entered simultaneously and
also if a waitmarked and a marked user entered simultaneously.
* Created a confbridge internal MOH API to eliminate the inlined MOH
handling code. Note that the conference mixing bridge needs to be locked
when actually starting/stopping MOH because there is a small window
between the conference join unsuspend MOH and actually joining the mixing
bridge.
* Created the concept of suspended MOH so it can be interrupted while
conference join announcements to the user and DTMF features can operate.
* Suspend any MOH until the user is about to actually join the mixing
bridge of the conference. This way any pre-join file playback does not
need to worry about MOH.
* Made post-join actions only play deferred entry announcement files.
Changing the user/conference state during that time is not protected or
controlled by the state machine.
Asterisk now includes Min-SE in outbound INVITEs when the value is not
90 (the default) and session timers are not disabled. This has the
effect of Asterisk following RFC4028 more closely with regard to 422
responses and preventing situations in which Asterisk would be forced
to temporarily accept a call to tear it down based on a Session-Expires
below the locally configured Min-SE.
(issue SWP-5051)
Review: https://reviewboard.asterisk.org/r/2222/ Reported-by: Kinsey Moore Patch-by: Kinsey Moore
........
Merged revisions 377946 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377947 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377948 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Currently, the buffer for the dynamic features list is set to a fixed size of
128. If the list is bigger than that, it results in the dynamic feature(s) not
being recognized.
This patch changes the buffer from a fixed size to a dynamic one.
(closes issue ASTERISK-20680)
Reported by: Clod Patry
Tested by: Michael L. Young
Patches:
asterisk-20680-dynamic-features-v2.diff
uploaded by Michael L. Young (license 5026)
Fix a potential deadlock in chan_sip during transfers.
The issue comes from the fact that transfers may perform
a redirecting update on a channel. The issue is that lock
inversion between the channel and its tech_pvt occurs since
the channel lock is released during the transfer process.
The fix is to move when the redirecting update occurs to a
place where neither the tech_pvt or the channel is locked so
that the two can be locked in the proper order.
(closes issue ASTERISK-20708)
reported by Mark Michelson
patches:
ASTERISK-20708-3.patch uploaded by Mark Michelson (License #5049)
Tested by:
Tim Ringenbach at Asteria Solutions Group
........
Merged revisions 377910 from http://svn.asterisk.org/svn/asterisk/branches/11
................
* Made ast_unregister_indication_country() unlink the found tone zone
before selecting a new default_tone_zone to make it impossible to select
the tone zone being unregistered again.
* Ringcadence is no longer parsed twice in store_config_tone_zone().
* Cleanup CLI commands and destroy default_tone_zone on exit.
Mark Michelson [Mon, 10 Dec 2012 20:14:23 +0000 (20:14 +0000)]
Solve the issue about the "CHANGE THIS" and "XXX CHANGE THIS XXX" taskprocessor names.
Unfortunately, this required a taskprocessor listener change that makes listener allocation
utterly silly. I'm going to change the scheme so that allocation of taskprocessor listeners
is done internally within taskprocessor code. This will make it parallel with threadpool
code, which is a good thing.
When using res_fax_digium, the T.38 CED tone was not being provided
properly which would cause some incoming faxes to fail. This was not an
issue with res_fax_spandsp since it does not strictly honor the
send_ced flag and sends the CED tone whenever receiving a T.38 fax.
(closes issue FAX-343) Reported-by: Benjamin Tietz Patch-by: Kinsey Moore
........
Merged revisions 377655 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377656 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377657 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Handle Session-Expires less than local Min-SE in 200 OK
Ensure that a call is immediately torn down if a Session-Expires value
received in a 200 OK is less than the local Min-SE. This also prevents
Asterisk from allowing calls with Session-Expires below the
RFC4028-mandated minimum (90s).
(closes issue ASTERISK-20653)
Review: https://reviewboard.asterisk.org/r/2237/ Patch-by: Kinsey Moore
........
Merged revisions 377623 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377624 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377625 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Fix code to send in both rx and tx open stream messages correct codecs. Found that on phase 0/1 phones wrong codecs cause to no audio in some situations.
(issue ASTERISK-20183)
........
Merged revisions 377591 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377592 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377593 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r377595 | igorg | 2012-12-10 01:03:48 -0600 (Mon, 10 Dec 2012) | 3 lines
Add firmware information to CLI devices listing
................
Mark Michelson [Mon, 10 Dec 2012 06:13:09 +0000 (06:13 +0000)]
Add threadpool options and accompanying test.
The only test added so far is an idle thread timeout
option. This will greatly aid threadpool users who wish
to maintain a threadpool by allowing for idle threads to
die out as necessary.
Mark Michelson [Mon, 10 Dec 2012 05:25:38 +0000 (05:25 +0000)]
Improve shutdown procedure.
This helps tests to pass more often than before.
They are far less likely to queue extra processes
into the control taskprocessor since they are prevented
once the threadpool begins to shut down.
Remove some dead code and additionally handle a case that wasn't handled.
........
Merged revisions 377487 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377504 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377505 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r377512 | tilghman | 2012-12-09 19:41:50 -0600 (Sun, 09 Dec 2012) | 22 lines
Improve documentation by making all of the colors used readable,
no matter what the background color is.
Dark blue on a black background is unreadable, as is yellow on a
light background. This patch turns on the bright attribute for
colors when on a dark background and turns *off* the bright
attribute when the -W command line option is used (indicating a
_light_ background). This ensures that text is readable in both
cases.
Mark Michelson [Sun, 9 Dec 2012 18:56:25 +0000 (18:56 +0000)]
Create longer thread destruction test.
This one involves shrinking the threadpool in such
a way that both idle and active threads are affected.
This test made me re-realize why the zombie state exists,
so I re-added it. We don't want to clog up the control
taskprocessor by waiting on active threads to complete
what they are doing. Instead, we mark them as zombies so
that when they are done, they can clean themselves up
properly.
Without the zombie state available, the new test actually
will deadlock.
Fix order of SIP allow/disallow in MySQL contrib script.
Using the contrib sippeers.sql script to create the sippeers MySQL table
would result in being unable to place calls if you set the disallow value
to all.
(closes issue ASTERISK-20756)
Reported by: Andre Luis
Patches:
sippeers.patch patch uploaded by Andre Luis
........
Merged revisions 377431 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377432 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377433 from http://svn.asterisk.org/svn/asterisk/branches/11
................
codec_dahdi: Fix output of "transcoder show" CLI command.
In r306010 "Asterisk media architecture conversion - no more format
bitfields", the logic for incrementing encoders and decoders when
opening transcoder channels was changed without making the corresponding
change when decrementing encoder / decoder channels. The result being
that when a channel was destroyed, codec_dahdi couldn't properly tell if
it was an encoder or decoder, and the default case is to assume it was a
decoder.
This could result in negative numbers for decoders in use like in:
VOIP6*CLI> transcoder show
2/-2 encoders/decoders of 92 channels are in use.
Mark Michelson [Fri, 7 Dec 2012 00:30:35 +0000 (00:30 +0000)]
Add new threadpool test and fix some taskprocessor bugs.
The new thread creation test fails because Asterisk locks up
while trying to lock a taskprocessor.
While trying to debug that, I found a race condition during taskprocessor
creation where a default taskprocessor listener could try to operate on
a partially started taskprocessor. This was fixed by adding a new callback
to taskprocessor listeners.
Then while testing that change, I found some bugs in the taskprocessor
tests where I was not properly unlocking when done with a lock. Scoped
locks have spoiled me a bit.
I still have not figured out why the threadpool thread creation test
is locking up.
Fix memory leak in 'manager show event' when command entered incorrectly
When the CLI command 'manager show event' was run incorrectly and its usage
instructions returned, a reference to the event container was leaked. This
would prevent the container from being reclaimed when Asterisk exits. We now
properly decrement the count on the ao2 object using the nifty RAII_VAR macro.
Thanks to Russell for helping me stumble on this, and Terry for writing that
ridiculously helpful macro.
........
Merged revisions 377319 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r377329 | russell | 2012-12-06 09:06:47 -0600 (Thu, 06 Dec 2012) | 7 lines
Add CLI tab completion to 'acl show'.
The 'acl show' CLI command allows you to show the details about a specific
named ACL in acl.conf. This patch adds tab completion to the command.
Review: https://reviewboard.asterisk.org/r/2230/
................
r377330 | russell | 2012-12-06 09:13:37 -0600 (Thu, 06 Dec 2012) | 6 lines
Minor code cleanup in named_acl.c.
This patch makes a few little cleanups to named_acl.c. A couple non-public
functions were made static and an opening brace for a function was moved to
its own line, per the coding guidelines.
................
Fix a SIP request memory leak with TLS connections.
During the TLS re-work in chan_sip some TLS specific code was moved
into a separate function. This function operates on a copy of the
incoming SIP request. This copy was never deinitialized causing a
memory leak for each request processed.
This function is now given a SIP request structure which it can use
to copy the incoming request into. This reduces the amount of memory
allocations done since the internal allocated components are reused
between packets and also ensures the SIP request structure is
deinitialized when the TLS connection is torn down.
(closes issue ASTERISK-20763)
Reported by: deti
........
Merged revisions 377257 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377258 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377259 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r377263 | jrose | 2012-12-05 11:17:06 -0600 (Wed, 05 Dec 2012) | 21 lines
res_srtp: Fix a crash caused by srtp_dealloc on an already dealloced session
When srtp_create fails, the session may be dealloced or just not alloced. At
the same time though, the session pointer might not be set to NULL in this
process and attempting to srtp_dealloc it again will cause a segfault. This
patch checks for failure of srtp_create and sets the session pointer to NULL
if it fails.
* Made func_confbridge_helper() allow an empty value when setting options.
You previously could not Set(CONFBRIDGE(user,pin)=) and clear the
configured pin from the dialplan.
* Made func_confbridge_helper() handle its datastore better if multiple
threads attempt to set the first CONFBRIDGE option value on the channel.
* Made the func_confbridge_helper() only output one diagnostic message
concerning the option.
* Made the bridge video_mode able to repeatedly change in the config file
and CONFBRIDGE dialplan function. The video_mode option values are an
enum and not independent of each other.
* Made handle_cli_confbridge_show_bridge_profile() better handle the
video_mode option.
* Simplified datastore handling code in conf_find_user_profile() and
conf_find_bridge_profile().
Mark Michelson [Tue, 4 Dec 2012 22:11:31 +0000 (22:11 +0000)]
Remove zombie state from threadpool altogether.
After giving it some consideration, there's no real
use for zombie threads. Listeners can't really use the
current number of zombie threads as a way of gauging activity,
zombifying threads is just an extra step before they die that
really serves no purpose, and since there's no way to re-animate
zombies, the operation does not need to be around.
I also fixed up some miscellaneous compilation errors that
were lingering from some past revisions.
Mark Michelson [Tue, 4 Dec 2012 21:21:15 +0000 (21:21 +0000)]
Simplify threadpool refcounting a bit.
Since threadpool shutdown is very strictly controlled,
there is no need to be so precise with reference counts
in queued operations. Since the threadpool shuts down its
own control taskprocessor before doing anything else destructive,
it can be guaranteed that all queued tasks will have a valid
pointer to the pool. This meant that some destructor functions
for helper structs could be removed entirely.
* Convert atexits list to a mutex instead of a rd/wr lock. The lock is
only write locked.
* Move CLI verbose Asterisk ending message to where AMI message is output
in really_quit() to avoid further surprises about using stuff already
shutdown.
Mark Michelson [Mon, 3 Dec 2012 17:24:11 +0000 (17:24 +0000)]
Fix a few miscellaneous things
* Renamed some taskprocessor listener callbacks
* Fixed what would become a refcounting issue for pools
* Removed some XXX comments from allocation failure points
Move functions to AFTER the block of forward declarations of functions.
It was a mess. The first part of chan_sip.c is constants, declarations, structures and stuff,
then forward declarations and then actual code. It's still a mess, but a bit less messy ;-)
................
r377022 | file | 2012-12-03 08:56:36 -0600 (Mon, 03 Dec 2012) | 13 lines
Fix an RTP instance reference count leak in chan_motif.
When setting up an RTP instance the RTCP portion of the instance
keeps a reference to the instance itself. In order to release this
reference and stop RTCP the stop API call must be called before
destroying the instance.
Tweak extension used for incoming calls received on Motif.
Based on feedback from numerous individuals this patch tweaks incoming calls
to first look for an extension with the name of the endpoint. If no such extension
exists the call will silently fall back to the "s" extension as it previously
did.
........
Merged revisions 376983 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Fix potential crashes during SIP attended transfers.
The principal behind this patch is simple. During a transfer,
we manipulate channels that are owned by a separate thread than
the one we currently are running in, so it makes sense that we
need to grab a reference to the channels so that they cannot
disappear out from under us.
In the wild, crashes were sometimes seen when the transferring
party would hang up the call before the transfer target answered
the call. The most common place to see the crash occur was when
attempting to send a connected line update to the transferer
channel.
(closes issue ASTERISK-20226)
Reported by Jared Smith
Patches:
ASTERISK-20226.patch uploaded by Mark Michelson (License #5049)
Tested by: Jared Smith
........
Merged revisions 376901 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376916 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376917 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r376922 | seanbright | 2012-11-30 11:08:41 -0600 (Fri, 30 Nov 2012) | 11 lines
Minor spelling fix to the VOLUME documentation.
........
Merged revisions 376919 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376920 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376921 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Improve Code Readability And Fix Setting natdetected Flag
For 1.8, 10, 11 and trunk we are are improving the code readability.
For 11 and trunk, auto nat detection was added. The natdetected flag was being
set to 1 when the host address in the VIA header did not specifiy a port. This
patch fixes this by setting the port on the temporary sock address used to
SIP_STANDARD_PORT in order for the sock address comparison to work properly.
(closes issue ASTERISK-20724)
Reported by: Michael L. Young
Patches:
asterisk-20724-set-port-v2.diff uploaded by Michael L. Young (license 5026)
Websocket by default doesn't return an ast_str for the payload received. When
converting it to an ast_str on chan_sip the last character was being omitted,
because ast_str functions expects that the given length includes the trailing
0x00. payload_len only has the actual string length without counting the
trailing zero.
For most cases this passed unnoticed as most of SIP messages ends with \r\n.
* Adds the following CLI commands to control MALLOC_DEBUG reporting of
unreleased malloc memory when Asterisk is shut down.
memory atexit list on
memory atexit list off
memory atexit summary byline
memory atexit summary byfunc
memory atexit summary byfile
memory atexit summary off
* Made check all remaining allocated region blocks atexit for fence
violations.
* Increased the allocated region hash table size by about three times. It
still isn't large enough considering the number of malloced blocks
Asterisk uses.
* Made CLI "memory show allocations anomalies" use
regions_check_all_fences().
manager: Make challenge work with allowmultiplelogin=no
Prior to this patch, challenge would yield a multiple logins error if used
without providing the username (which isn't really supposed to be an argument
to challenge) if allowmultiplelogin was set to no because allowmultiplelogin
finds a user with a zero length login name. This check is simply disabled for
the challenge action when the username is empty by this patch.
(closes issue ASTERISK-20677)
Reported by: Vladimir
Patches:
challenge_action_nomultiplelogin.diff uploaded by Jonathan Rose (license 6182)
........
Merged revisions 376725 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376726 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376727 from http://svn.asterisk.org/svn/asterisk/branches/11
................
The '-' char is supposed to be ignored by the dialplan extension matching.
Unfortunately, it's treatment is not handled consistently throughout the
extension matching code.
* Made the old exten matching code consistently ignore '-' chars.
* Made the old exten matching code consistently handle case in the
matching.
* Made ignore empty character sets.
* Fixed ast_extension_cmp() to return -1, 0, or 1 as documented. The only
user of it in pbx_lua.c was testing for -1. It was originally returning
the strcmp() value for less than which is not usually going to be -1.
* Fix character set sorting if the sets have the same number of characters
and start with the same character. Character set [0-9] now sorts before
[02-9a] as originally intended.
* Updated some extension label and priority already in use warnings to
also indicate if the extension is aliased.
* Removed call to ast_module_user_hangup_all() in res_config_mysql.c since
it is effectively a noop. No channels can attach a reference to that
module.
* Removed call to ast_module_user_hangup_all() in app_celgenuserevent.c.
The caller of unload_module() has already called it.
* Removed redundant channel module references in pbx_dundi.c. The
registered dialplan function callback dispatchers for the read/read2/write
callbacks already reference the module before calling.
* pbx_dundi: Moved unregistering CLI commands, DUNDi switch, and dialplan
functions to the first thing the unload_module() does. This will reduce
the chance of new channels using DUNDi services while the module is being
torn down.
........
Merged revisions 376657 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376658 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 376659 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Re-initialize logmsgs mutex upon logger initialization to prevent lock errors
Similar to the patch that moved the fork earlier in the startup sequence to
prevent mutex errors in the recursive mutex surrounding the read/write thread
registration lock, this patch re-initializes the logmsgs mutex. Part of the
start up sequence before forking the process into the background includes
reading asterisk.conf; this has to occur prior to the call to daemon in order
to read startup parameters. When reading in a conf file, log statements can
be generated. Since this can't be avoided, the mutex instead is
re-initialized to ensure a reset of any thread tracking information.
This patch also includes some additional debugging to catch errors when
locking or unlocking the recursive mutex that surrounds locks when the
DEBUG_THREADS build option is enabled. DO_CRASH or THREAD_CRASH will
cause an abort() if a mutex error is detected.
Reduce CLI spam of "Extension Changed" device state messages.
Asterisk 11 follows RFC3265 that states that after every subscribe or resubscribe a notify should be sent.
Thus the console if filled continuously with the following after every subscribe;
== Extension Changed 8512[phones] new state IDLE for Notify User cisco1
In Asterisk 1.8 only changes would be sent. Thus only when a device state changed was anything emitted to the console.
fix:
Only print to console when device state isn't forced.
projects / thirdparty / asterisk.git / log
