* Revert the -r341580 and -r341599 changes adding the queues.conf
check_state_unknown option as it was added in an attempt to fix this
problem. The fix did not need to be optional. The fix should not have
tried to explicitly set the device state. Setting the device state by
something other than the device introduces a race condition. I also could
not see how the change would be effective other than delaying the
app_queue code long enough for the device state to propagate to app_queue.
........
Merged revisions 378663 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378683 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378687 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378691 | rmudgett | 2013-01-08 18:05:35 -0600 (Tue, 08 Jan 2013) | 10 lines
app_queue: Fix incorrect assertion.
(issue ASTERISK-16115)
........
Merged revisions 378689 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 378690 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Mark Michelson [Mon, 7 Jan 2013 22:16:06 +0000 (22:16 +0000)]
Address review board feedback from Matt and Richard
* Remove extraneous whitespace
* Bump up debug levels of messages and add identifying info to messages.
* Account for potential failures of ao2_link()
* Add additional test and some more test data
* Add some comments in places where they could be useful
* Make threadpool listeners and their callbacks optional
Rewrite skinny dialing to remove threaded simpleswitch
This rewrite changes skinny dialing from the threaded simpleswitch
to a scheduled timeout approach. There were some underlying issues
with the threaded simple switch with occasional corruption and
possible segfaults.
res_srtp: Prevent a crash from occurring due to srtp_create failures in srtp_create
Under some circumstances, libsrtp's srtp_create function deallocates memory that
it wasn't initially responsible for allocating. Because we weren't initially
aware of this behavior, this memory was still used in spite of being unallocated
during the course of the srtp_unprotect function. A while back I made a patch
which would set this value to NULL, but that exposed a possible condition where
we would then try to check a member of the struct which would cause a segfault.
In order to address these problems, ast_srtp_unprotect will now set an error value
when it ends without a valid SRTP session which will result in the caller of
srtp_unprotect observing this error and hanging up the relevant channel instead of
trying to keep using the invalid session address.
Fix SIP Notify Messages To Have The Proper IP Address In The FROM Field
On a multihomed server when sending a NOTIFY message, we were not figuring out
which network should be used to contact the peer.
This patch fixes the problem by calling ast_sip_ouraddrfor() and then
build_via() so that our NOTIFY message contains the correct IP address.
Also, a debug message is being added to help follow the call-id changes that
occur. This was helpful for confirming that the IP address was set properly
since the call-id contains the IP address. It also will be helpful for
troubleshooting purposes when following a call in the debug logs.
(closes issue ASTERISK-20805)
Reported by: Bryan Hunt
Tested by: Bryan Hunt, Michael L. Young
Patches:
asterisk-20805-notify-ip-v2.diff uploaded by Michael L. Young (license 5026)
Merged revisions 378554 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378559 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378585 | kmoore | 2013-01-04 16:19:16 -0600 (Fri, 04 Jan 2013) | 13 lines
Fix pjproject compilation in certain circumstances
On a fresh checkout of Asterisk 11, running make before ./configure
could cause the pjproject subdirectory to get in an odd state that
would prevent compilation. This patch by Tilghman prevents that from
occurring.
Fix Queue Log Reporting Every Call COMPLETECALLER With "h" Extension Present
When the "h" extension is present within the context of the queue, all calls
are being reported COMPLETECALLER even when the agent is hanging up the call.
This patch checks to see if the agent hung-up or not instead of only relying on
checking if the queue (caller) channel hung-up or not. It would appear that
having the h extension in the mix, the pbx goes to the h extension,
"hanging-up" the queue channel and triggering the reporting of COMPLETECALLER.
(closes issue ASTERISK-20743)
Reported by: call
Tested by: call, Michael L. Young
Patches:
asterisk-20743-q-cmplt-caller.diff
uploaded by Michael L. Young (license 5026)
* Made agent_cont_sleep() and agent_ack_sleep() stop waiting if the wrapup
time expires. agent_cont_sleep() had tried but returned the wrong value
to stop waiting.
* Made agent_ack_sleep() take a struct agent_pvt pointer instead of a void
pointer for better type safety.
........
Merged revisions 378486 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378487 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Merged revisions 378456 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378457 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378460 | kmoore | 2013-01-03 12:51:43 -0600 (Thu, 03 Jan 2013) | 13 lines
Add missing test event
This test event was missing from channel.c causing the dial_LS_options
test to fail intermittently because of a race condition where most code
paths emitted the test event but this one did not. The dial_LS_options
test should stop bouncing now.
........
Merged revisions 378455 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378459 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Prevent crashes in res_xmpp when receiving large messages
Similar to r378287, res_xmpp was marshaling data read from an external source
onto the stack. For a sufficiently large message, this could cause a stack
overflow. This patch modifies res_xmpp in a similar fashion to res_jabber by
removing the stack allocation, as it was unnecessary.
Merged revisions 378411 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378414 | tilghman | 2013-01-03 10:04:11 -0600 (Thu, 03 Jan 2013) | 11 lines
Add aliases to the Directory.
This is an interesting feature that allows additional strings to be used to
search the Directory, primarily intended to be used with nicknames, but could
be used with affiliations and the like. Because the name field is used in
more than one place (such as email notifications), it is important that these
additional strings not be placed in the name field, but be specified
separately.
Fix AMI redirect action with two channels failing to redirect both channels.
The AMI redirect action can fail to redirect two channels that are bridged
together. There is a race between the AMI thread redirecting the two
channels and the bridge thread noticing that a channel is hungup from the
redirects.
* Made the bridge wait for both channels to be redirected before exiting.
* Made the AMI redirect check that all required headers are present before
proceeding with the redirection.
* Made the AMI redirect require that any supplied ExtraChannel exist
before proceeding. Previously the code fell back to a single channel
redirect operation.
(closes issue ASTERISK-18975)
Reported by: Ben Klang
Merged revisions 378356 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378358 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378377 | mjordan | 2013-01-02 16:10:32 -0600 (Wed, 02 Jan 2013) | 24 lines
Prevent crashes from occurring when reading from data sources with large values
When reading configuration data from an Asterisk .conf file or when pulling
data from an Asterisk RealTime backend, Asterisk was copying the data on the
stack for manipulation. Unfortunately, it is possible to read configuration
data or realtime data from some data source that provides a large blob of
characters. This could potentially cause a crash via a stack overflow.
This patch prevents large sets of data from being read from an ARA backend or
from an Asterisk conf file.
Merged revisions 378375 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378376 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378384 | mjordan | 2013-01-02 16:19:32 -0600 (Wed, 02 Jan 2013) | 11 lines
Clean up app_mysql's application entry points to properly parse arguments
When parsing arguments, application entry points should not attempt to
directly modify the parameters to the function. This patch properly duplicates
the passed in parameters before attempting to parse them.
Prevent exhaustion of system resources through exploitation of event cache
Asterisk maintains an internal cache for devices in the event subsystem. The
device state cache holds the state of each device known to Asterisk, such that
consumers of device state information can query for the last known state for
a particular device, even if it is not part of an active call. The concept of
a device in Asterisk can include entities that do not have a physical
representation. One way that this occurred was when anonymous calls are allowed
in Asterisk. A device was automatically created and stored in the cache for
each anonymous call that occurred; this was possible in the SIP and IAX2
channel drivers and through channel drivers that utilized the
res_jabber/res_xmpp resource modules (Gtalk, Jingle, and Motif). These devices
are never removed from the system, allowing anonymous calls to potentially
exhaust a system's resources.
This patch changes the event cache subsystem and device state management to
no longer cache devices that are not associated with a physical entity.
Resolve crashes due to large stack allocations when using TCP
Asterisk had several places where messages received over various network
transports may be copied in a single stack allocation. In the case of TCP,
since multiple packets in a stream may be concatenated together, this can
lead to large allocations that overflow the stack.
This patch modifies those portions of Asterisk using TCP to either
favor heap allocations or use an upper bound to ensure that the stack will not
overflow:
* For SIP, the allocation now has an upper limit
* For HTTP, the allocation is now a heap allocation instead of a stack
allocation
* For XMPP (in res_jabber), the allocation has been eliminated since it was
unnecesary.
Note that the HTTP portion of this issue was independently found by Brandon
Edwards of Exodus Intelligence.
Bail out early when building an ast_trans_pvt and the translator doesn't supply a 'newpvt'
........
r378249 | seanbright | 2013-01-01 11:10:42 -0600 (Tue, 01 Jan 2013) | 2 lines
Revert 378248. I changed the logic of this function unitentionally, pointed out by file.
........
Ensure chan_sip rejects encrypted streams without crypto info
This ensures that Asterisk rejects encrypted media streams (RTP/SAVP
audio and video) that are missing cryptographic keys and ensures that
the incoming SDP is consistent with RFC4568 as far as having a crypto
attribute present for any SAVP streams.
* awesome_locking() does not need to thrash the pvt lock as much.
* local_setoption() does not need to check for NULL pvt on cleanup since
it will never be NULL.
* Made ref the pvt before locking for consistency.
................
r378074 | qwell | 2012-12-17 14:59:51 -0600 (Mon, 17 Dec 2012) | 10 lines
Make libasteriskssl.so symlink use a relative path.
This was causing issues when using DESTDIR, since the path to which the link
pointed is not likely to exist (and not useful to exist) on the target system.
(issue ASTNOW-284)
........
Merged revisions 378073 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Features: BRIDGE_FEATURES variable automixmonitor support and use proper party
BRIDGE_FEATURES did not previously support the automixmonitor feature. Now it
does. In addition, the BRIDGE_FEATURES variable would not apply features to
the proper party based on whether the feature option letter was in caps or
in lowercase (both ways would apply it to the caller). Now uppercase applies
to the caller while lowercase applies to the callee (like with the dial option)
........
r378064 | rmudgett | 2012-12-14 16:45:03 -0600 (Fri, 14 Dec 2012) | 4 lines
chan_agent: Remove some duplicated code.
No need to check for an agent twice. Santa does that.
........
With the option ringinuse=no set, the patch committed for ASTERISK-16115
causes non-SIP queue members to never be called because the device state
is checked after a channel is created to determine if the member is busy.
These queue members always get the "Member %s is busy, cannot dial"
message.
Most channel drivers other than chan_sip use the default device state
handling. The default device-state state is considered in use or unknown
if the channel exists or not respectively.
Fix skinny to recognise vmexten in general section of conf
Fixup the vmexten so if globally set in general section will be honored by
chan_skinny. Also get rid of the 'global_' part of variable name to match
regexten.
Make generate_exchange_uuid() always return the passed ast_str pointer.
I changed this code earlier to return NULL if it wasn't able to generate a UUID,
whereas the earlier code would always return the ast_str that was passed in.
Switch back to returning the ast_str, only set it to the empty string instead if
UUID generation fails. We still do a validity check later which will catch this
and blow up if necessary.
................
r378001 | wedhorn | 2012-12-13 15:25:31 -0600 (Thu, 13 Dec 2012) | 9 lines
Minor fixes for chan_skinny
Whitespace, change SUBSTATE_ONHOOK to correct SKINNY_ONHOOK and
correct len of 2 strcmp in skinny_setdebug(). (see opticron's review
on https://reviewboard.asterisk.org/r/2240/)
........
Merged revisions 377991 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r378002 | rmudgett | 2012-12-13 15:28:15 -0600 (Thu, 13 Dec 2012) | 35 lines
confbridge: Fix MOH on simultaneous user entry to a new conference.
When two users entered a new conference simultaneously, one of the callers
hears MOH. This happened if two unmarked users entered simultaneously and
also if a waitmarked and a marked user entered simultaneously.
* Created a confbridge internal MOH API to eliminate the inlined MOH
handling code. Note that the conference mixing bridge needs to be locked
when actually starting/stopping MOH because there is a small window
between the conference join unsuspend MOH and actually joining the mixing
bridge.
* Created the concept of suspended MOH so it can be interrupted while
conference join announcements to the user and DTMF features can operate.
* Suspend any MOH until the user is about to actually join the mixing
bridge of the conference. This way any pre-join file playback does not
need to worry about MOH.
* Made post-join actions only play deferred entry announcement files.
Changing the user/conference state during that time is not protected or
controlled by the state machine.
Asterisk now includes Min-SE in outbound INVITEs when the value is not
90 (the default) and session timers are not disabled. This has the
effect of Asterisk following RFC4028 more closely with regard to 422
responses and preventing situations in which Asterisk would be forced
to temporarily accept a call to tear it down based on a Session-Expires
below the locally configured Min-SE.
(issue SWP-5051)
Review: https://reviewboard.asterisk.org/r/2222/ Reported-by: Kinsey Moore Patch-by: Kinsey Moore
........
Merged revisions 377946 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377947 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377948 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Currently, the buffer for the dynamic features list is set to a fixed size of
128. If the list is bigger than that, it results in the dynamic feature(s) not
being recognized.
This patch changes the buffer from a fixed size to a dynamic one.
(closes issue ASTERISK-20680)
Reported by: Clod Patry
Tested by: Michael L. Young
Patches:
asterisk-20680-dynamic-features-v2.diff
uploaded by Michael L. Young (license 5026)
Fix a potential deadlock in chan_sip during transfers.
The issue comes from the fact that transfers may perform
a redirecting update on a channel. The issue is that lock
inversion between the channel and its tech_pvt occurs since
the channel lock is released during the transfer process.
The fix is to move when the redirecting update occurs to a
place where neither the tech_pvt or the channel is locked so
that the two can be locked in the proper order.
(closes issue ASTERISK-20708)
reported by Mark Michelson
patches:
ASTERISK-20708-3.patch uploaded by Mark Michelson (License #5049)
Tested by:
Tim Ringenbach at Asteria Solutions Group
........
Merged revisions 377910 from http://svn.asterisk.org/svn/asterisk/branches/11
................
* Made ast_unregister_indication_country() unlink the found tone zone
before selecting a new default_tone_zone to make it impossible to select
the tone zone being unregistered again.
* Ringcadence is no longer parsed twice in store_config_tone_zone().
* Cleanup CLI commands and destroy default_tone_zone on exit.
Mark Michelson [Mon, 10 Dec 2012 20:14:23 +0000 (20:14 +0000)]
Solve the issue about the "CHANGE THIS" and "XXX CHANGE THIS XXX" taskprocessor names.
Unfortunately, this required a taskprocessor listener change that makes listener allocation
utterly silly. I'm going to change the scheme so that allocation of taskprocessor listeners
is done internally within taskprocessor code. This will make it parallel with threadpool
code, which is a good thing.
When using res_fax_digium, the T.38 CED tone was not being provided
properly which would cause some incoming faxes to fail. This was not an
issue with res_fax_spandsp since it does not strictly honor the
send_ced flag and sends the CED tone whenever receiving a T.38 fax.
(closes issue FAX-343) Reported-by: Benjamin Tietz Patch-by: Kinsey Moore
........
Merged revisions 377655 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377656 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377657 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Handle Session-Expires less than local Min-SE in 200 OK
Ensure that a call is immediately torn down if a Session-Expires value
received in a 200 OK is less than the local Min-SE. This also prevents
Asterisk from allowing calls with Session-Expires below the
RFC4028-mandated minimum (90s).
(closes issue ASTERISK-20653)
Review: https://reviewboard.asterisk.org/r/2237/ Patch-by: Kinsey Moore
........
Merged revisions 377623 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377624 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377625 from http://svn.asterisk.org/svn/asterisk/branches/11
................
Fix code to send in both rx and tx open stream messages correct codecs. Found that on phase 0/1 phones wrong codecs cause to no audio in some situations.
(issue ASTERISK-20183)
........
Merged revisions 377591 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377592 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377593 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r377595 | igorg | 2012-12-10 01:03:48 -0600 (Mon, 10 Dec 2012) | 3 lines
Add firmware information to CLI devices listing
................
Mark Michelson [Mon, 10 Dec 2012 06:13:09 +0000 (06:13 +0000)]
Add threadpool options and accompanying test.
The only test added so far is an idle thread timeout
option. This will greatly aid threadpool users who wish
to maintain a threadpool by allowing for idle threads to
die out as necessary.
Mark Michelson [Mon, 10 Dec 2012 05:25:38 +0000 (05:25 +0000)]
Improve shutdown procedure.
This helps tests to pass more often than before.
They are far less likely to queue extra processes
into the control taskprocessor since they are prevented
once the threadpool begins to shut down.
Remove some dead code and additionally handle a case that wasn't handled.
........
Merged revisions 377487 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377504 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377505 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r377512 | tilghman | 2012-12-09 19:41:50 -0600 (Sun, 09 Dec 2012) | 22 lines
Improve documentation by making all of the colors used readable,
no matter what the background color is.
Dark blue on a black background is unreadable, as is yellow on a
light background. This patch turns on the bright attribute for
colors when on a dark background and turns *off* the bright
attribute when the -W command line option is used (indicating a
_light_ background). This ensures that text is readable in both
cases.
Mark Michelson [Sun, 9 Dec 2012 18:56:25 +0000 (18:56 +0000)]
Create longer thread destruction test.
This one involves shrinking the threadpool in such
a way that both idle and active threads are affected.
This test made me re-realize why the zombie state exists,
so I re-added it. We don't want to clog up the control
taskprocessor by waiting on active threads to complete
what they are doing. Instead, we mark them as zombies so
that when they are done, they can clean themselves up
properly.
Without the zombie state available, the new test actually
will deadlock.
Fix order of SIP allow/disallow in MySQL contrib script.
Using the contrib sippeers.sql script to create the sippeers MySQL table
would result in being unable to place calls if you set the disallow value
to all.
(closes issue ASTERISK-20756)
Reported by: Andre Luis
Patches:
sippeers.patch patch uploaded by Andre Luis
........
Merged revisions 377431 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377432 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377433 from http://svn.asterisk.org/svn/asterisk/branches/11
................
codec_dahdi: Fix output of "transcoder show" CLI command.
In r306010 "Asterisk media architecture conversion - no more format
bitfields", the logic for incrementing encoders and decoders when
opening transcoder channels was changed without making the corresponding
change when decrementing encoder / decoder channels. The result being
that when a channel was destroyed, codec_dahdi couldn't properly tell if
it was an encoder or decoder, and the default case is to assume it was a
decoder.
This could result in negative numbers for decoders in use like in:
VOIP6*CLI> transcoder show
2/-2 encoders/decoders of 92 channels are in use.
Mark Michelson [Fri, 7 Dec 2012 00:30:35 +0000 (00:30 +0000)]
Add new threadpool test and fix some taskprocessor bugs.
The new thread creation test fails because Asterisk locks up
while trying to lock a taskprocessor.
While trying to debug that, I found a race condition during taskprocessor
creation where a default taskprocessor listener could try to operate on
a partially started taskprocessor. This was fixed by adding a new callback
to taskprocessor listeners.
Then while testing that change, I found some bugs in the taskprocessor
tests where I was not properly unlocking when done with a lock. Scoped
locks have spoiled me a bit.
I still have not figured out why the threadpool thread creation test
is locking up.
Fix memory leak in 'manager show event' when command entered incorrectly
When the CLI command 'manager show event' was run incorrectly and its usage
instructions returned, a reference to the event container was leaked. This
would prevent the container from being reclaimed when Asterisk exits. We now
properly decrement the count on the ao2 object using the nifty RAII_VAR macro.
Thanks to Russell for helping me stumble on this, and Terry for writing that
ridiculously helpful macro.
........
Merged revisions 377319 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r377329 | russell | 2012-12-06 09:06:47 -0600 (Thu, 06 Dec 2012) | 7 lines
Add CLI tab completion to 'acl show'.
The 'acl show' CLI command allows you to show the details about a specific
named ACL in acl.conf. This patch adds tab completion to the command.
Review: https://reviewboard.asterisk.org/r/2230/
................
r377330 | russell | 2012-12-06 09:13:37 -0600 (Thu, 06 Dec 2012) | 6 lines
Minor code cleanup in named_acl.c.
This patch makes a few little cleanups to named_acl.c. A couple non-public
functions were made static and an opening brace for a function was moved to
its own line, per the coding guidelines.
................
Fix a SIP request memory leak with TLS connections.
During the TLS re-work in chan_sip some TLS specific code was moved
into a separate function. This function operates on a copy of the
incoming SIP request. This copy was never deinitialized causing a
memory leak for each request processed.
This function is now given a SIP request structure which it can use
to copy the incoming request into. This reduces the amount of memory
allocations done since the internal allocated components are reused
between packets and also ensures the SIP request structure is
deinitialized when the TLS connection is torn down.
(closes issue ASTERISK-20763)
Reported by: deti
........
Merged revisions 377257 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 377258 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 377259 from http://svn.asterisk.org/svn/asterisk/branches/11
................
r377263 | jrose | 2012-12-05 11:17:06 -0600 (Wed, 05 Dec 2012) | 21 lines
res_srtp: Fix a crash caused by srtp_dealloc on an already dealloced session
When srtp_create fails, the session may be dealloced or just not alloced. At
the same time though, the session pointer might not be set to NULL in this
process and attempting to srtp_dealloc it again will cause a segfault. This
patch checks for failure of srtp_create and sets the session pointer to NULL
if it fails.
* Made func_confbridge_helper() allow an empty value when setting options.
You previously could not Set(CONFBRIDGE(user,pin)=) and clear the
configured pin from the dialplan.
* Made func_confbridge_helper() handle its datastore better if multiple
threads attempt to set the first CONFBRIDGE option value on the channel.
* Made the func_confbridge_helper() only output one diagnostic message
concerning the option.
* Made the bridge video_mode able to repeatedly change in the config file
and CONFBRIDGE dialplan function. The video_mode option values are an
enum and not independent of each other.
* Made handle_cli_confbridge_show_bridge_profile() better handle the
video_mode option.
* Simplified datastore handling code in conf_find_user_profile() and
conf_find_bridge_profile().
Mark Michelson [Tue, 4 Dec 2012 22:11:31 +0000 (22:11 +0000)]
Remove zombie state from threadpool altogether.
After giving it some consideration, there's no real
use for zombie threads. Listeners can't really use the
current number of zombie threads as a way of gauging activity,
zombifying threads is just an extra step before they die that
really serves no purpose, and since there's no way to re-animate
zombies, the operation does not need to be around.
I also fixed up some miscellaneous compilation errors that
were lingering from some past revisions.
Mark Michelson [Tue, 4 Dec 2012 21:21:15 +0000 (21:21 +0000)]
Simplify threadpool refcounting a bit.
Since threadpool shutdown is very strictly controlled,
there is no need to be so precise with reference counts
in queued operations. Since the threadpool shuts down its
own control taskprocessor before doing anything else destructive,
it can be guaranteed that all queued tasks will have a valid
pointer to the pool. This meant that some destructor functions
for helper structs could be removed entirely.
* Convert atexits list to a mutex instead of a rd/wr lock. The lock is
only write locked.
* Move CLI verbose Asterisk ending message to where AMI message is output
in really_quit() to avoid further surprises about using stuff already
shutdown.
projects / thirdparty / asterisk.git / log
