Wang Mingyu [Tue, 19 Dec 2023 09:28:20 +0000 (17:28 +0800)]
libatomic-ops: upgrade 7.8.0 -> 7.8.2
Changelog:
=========
* Eliminate 'atomic_thread_fence is unsupported with tsan' gcc-11 warning
* Eliminate 'comparing signed/unsigned values' lcc warning in add_chunk_as
* Fix 'undefined reference to AO_pt_lock' if configure is using clang-16
* Fix 'undefined reference to __atomic_load/store/cas_16' Mingw64-gcc error
* Fix 'undefined reference' linker errors if shared build on OpenBSD (CMake)
* Fix get_chunk for case of mmap area is located before AO_initial_heap
* Fix typo in AO_HAVE_compare_and_swap_double name in atomic_ops_stack.h
* Fix typo in comment of run_one_test of test_stack
* Fix typos in comments of atomic_ops_malloc.c and atomic_ops_stack.c/h
* Update cmake minimum required version to 3.5
Signed-off-by: Wang Mingyu <wangmy@fujitsu.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lee Chee Yang [Fri, 15 Dec 2023 09:40:21 +0000 (17:40 +0800)]
curl: update to 8.5.0
update include fix for CVE-2023-46218.
skip test 1477 which check that libcurl-errors.3 and the public
header files have the same set of error codes.
Notes: This test is not included in the source tarball.
https://github.com/curl/curl/issues/12462
Release Notes:
curl and libcurl 8.5.0
Public curl releases: 253
Command line options: 258
curl_easy_setopt() options: 303
Public functions in libcurl: 93
Contributors: 3039
This release includes the following changes:
o gnutls: support CURLSSLOPT_NATIVE_CA [31]
o HTTP3: ngtcp2 builds are no longer experimental [77]
This release includes the following bugfixes:
o appveyor: make VS2008-built curl tool runnable [93]
o asyn-thread: use pipe instead of socketpair for IPC when available [4]
o autotools: accept linker flags via `CURL_LDFLAGS_{LIB,BIN}` [128]
o autotools: avoid passing `LDFLAGS` twice to libcurl [127]
o autotools: delete LCC compiler support bits [137]
o autotools: fix/improve gcc and Apple clang version detection [136]
o autotools: stop setting `-std=gnu89` with `--enable-warnings` [135]
o autotools: update references to deleted `crypt-auth` option [46]
o BINDINGS: add V binding [54]
o build: add `src/.checksrc` to source tarball [1]
o build: add more picky warnings and fix them [172]
o build: always revert `#pragma GCC diagnostic` after use [143]
o build: delete `HAVE_STDINT_H` and `HAVE_INTTYPES_H` [107]
o build: delete support bits for obsolete Windows compilers [106]
o build: fix 'threadsafe' feature detection for older gcc [19]
o build: fix builds that disable protocols but not digest auth [174]
o build: fix compiler warning with auths disabled [85]
o build: fix libssh2 + `CURL_DISABLE_DIGEST_AUTH` + `CURL_DISABLE_AWS` [120]
o build: picky warning updates [125]
o build: require Windows XP or newer [86]
o cfilter: provide call to tell connection to forget a socket [65]
o checksrc.pl: support #line instructions
o CI: add autotools, out-of-tree, debug build to distro check job [14]
o CI: ignore test 286 on Appveyor gcc 9 build [6]
o cmake: add `CURL_DISABLE_BINDLOCAL` option [146]
o cmake: add test for `DISABLE` options, add `CURL_DISABLE_HEADERS_API` [138]
o cmake: dedupe Windows system libs [114]
o cmake: fix `HAVE_H_ERRNO_ASSIGNABLE` detection [2]
o cmake: fix CURL_DISABLE_GETOPTIONS [12]
o cmake: fix multiple include of CURL package [96]
o cmake: fix OpenSSL quic detection in quiche builds [56]
o cmake: option to disable install & drop `curlu` target when unused [72]
o cmake: pre-fill rest of detection values for Windows [50]
o cmake: replace `check_library_exists_concat()` [23]
o cmake: speed up threads setup for Windows [68]
o cmake: speed up zstd detection [69]
o config-win32: set `HAVE_SNPRINTF` for mingw-w64 [123]
o configure: better --disable-http [80]
o configure: check for the fseeko declaration too [55]
o conncache: use the closure handle when disconnecting surplus connections [173]
o content_encoding: make Curl_all_content_encodings allocless [101]
o cookie: lowercase the domain names before PSL checks [160]
o curl.h: delete Symbian OS references [162]
o curl.h: on FreeBSD include sys/param.h instead of osreldate.h [21]
o curl.rc: switch out the copyright symbol for plain ASCII [167]
o curl: improved IPFS and IPNS URL support [87]
o curl_easy_duphandle.3: clarify how HSTS and alt-svc are duped [99]
o Curl_http_body: cleanup properly when Curl_getformdata errors [152]
o curl_setup: disallow Windows IPv6 builds missing getaddrinfo [57]
o curl_sspi: support more revocation error names in error messages [95]
o CURLINFO_PRETRANSFER_TIME_T.3: fix time explanation [181]
o CURLMOPT_MAX_CONCURRENT_STREAMS: make sure the set value is within range [165]
o CURLOPT_CAINFO_BLOB.3: explain what CURL_BLOB_COPY does [113]
o CURLOPT_WRITEFUNCTION.3: clarify libcurl returns for CURL_WRITEFUNC_ERROR [45]
o CURPOST_POSTFIELDS.3: add CURLOPT_COPYPOSTFIELDS in SEE ALSO
o docs/example/keepalive.c: show TCP keep-alive options [73]
o docs/example/localport.c: show off CURLOPT_LOCALPORT [83]
o docs/examples/interface.c: show CURLOPT_INTERFACE use [84]
o docs/libcurl: fix three minor man page format mistakes [26]
o docs/libcurl: SYNSOPSIS cleanup [150]
o docs: add supported version for the json write-out [92]
o docs: clarify that curl passes on input unfiltered [47]
o docs: fix function typo in curl_easy_option_next.3 [36]
o docs: KNOWN_BUGS cleanup
o docs: make all examples in all libcurl man pages compile [175]
o docs: preserve the modification date when copying the prebuilt man page [89]
o docs: remove bold from some man page SYNOPSIS sections [90]
o docs: use SOURCE_DATE_EPOCH for generated manpages [16]
o doh: provide better return code for responses w/o addresses [133]
o doh: use PIPEWAIT when HTTP/2 is attempted [63]
o duphandle: also free 'outcurl->cookies' in error path [122]
o duphandle: make dupset() not return with pointers to old alloced data [109]
o duphandle: use strdup to clone *COPYPOSTFIELDS if size is not set [132]
o easy: in duphandle, init the cookies for the new handle [131]
o easy: remove duplicate wolfSSH init call [37]
o easy_lock: add a pthread_mutex_t fallback [13]
o examples/rtsp-options.c: add [157]
o fopen: create new file using old file's mode [153]
o fopen: create short(er) temporary file name [155]
o getenv: PlayStation doesn't have getenv() [41]
o GHA: move mod_h2 version in CI to v2.0.25 [43]
o hostip: show the list of IPs when resolving is done [35]
o hostip: silence compiler warning `-Wparentheses-equality` [62]
o hsts: skip single-dot hostname [67]
o HTTP/2, HTTP/3: handle detach of onoing transfers [134]
o http2: header conversion tightening [33]
o http2: provide an error callback and failf the message [53]
o http2: safer invocation of populate_binsettings [8]
o http: allow longer HTTP/2 request method names [112]
o http: avoid Expect: 100-continue if Upgrade: is used [15]
o http: consider resume with CURLOPT_FAILONERRROR and 416 to be fine [81]
o http: fix `-Wunused-parameter` with no auth and no proxy [149]
o http: fix `-Wunused-variable` compiler warning [115]
o http: fix empty-body warning [76]
o http_aws_sigv4: canonicalise valueless query params [88]
o hyper: temporarily remove HTTP/2 support [139]
o INSTALL: update list of ports and CPU archs
o IPFS: fix IPFS_PATH and file parsing [119]
o keylog: disable if unused [145]
o lib: add and use Curl_strndup() [97]
o lib: apache style infof and trace macros/functions [71]
o lib: fix gcc warning in printf call [7]
o libcurl-errors.3: sync with current public headers [156]
o libcurl-thread.3: simplify the TLS section [79]
o Makefile.am: drop vc10, vc11 and vc12 projects from dist [103]
o Makefile.mk: fix `-rtmp` option for non-Windows
o mime: store "form escape" as a single bit [170]
o misc: fix -Walloc-size warnings [118]
o msh3: error when built with CURL_DISABLE_SOCKETPAIR set [61]
o multi: during ratelimit multi_getsock should return no sockets [182]
o multi: use pipe instead of socketpair to *wakeup() [18]
o ngtcp2: fix races in stream handling [178]
o ngtcp2: ignore errors on unknown streams [158]
o ntlm_wb: use pipe instead of socketpair when possible [44]
o openldap: move the alloc of ldapconninfo to *connect() [29]
o openldap: set the callback argument in oldap_do [30]
o openssl: avoid BN_num_bits() NULL pointer derefs [9]
o openssl: fix building with v3 `no-deprecated` + add CI test [161]
o openssl: fix infof() to avoid compiler warning for %s with null [70]
o openssl: identify the "quictls" backend correctly [82]
o openssl: include SIG and KEM algorithms in verbose [52]
o openssl: make CURLSSLOPT_NATIVE_CA import Windows intermediate CAs [58]
o openssl: two multi pointer checks should probably rather be asserts [91]
o openssl: when a session-ID is reused, skip OCSP stapling [142]
o page-footer: clarify exit code 25 [51]
o projects: add VC14.20 project files [104]
o pytest: use lower count in repeat tests [98]
o quic: make eyeballers connect retries stop at weird replies [140]
o quic: manage connection idle timeouts [5]
o quiche: use quiche_conn_peer_transport_params() [116]
o rand: fix build error with autotools + LibreSSL [111]
o resolve.d: drop a multi use-sentence [100]
o RTSP: improved RTP parser [32]
o rustls: implement connect_blocking [154]
o sasl: fix `-Wunused-function` compiler warning [124]
o schannel: add CA cache support for files and memory blobs [121]
o setopt: check CURLOPT_TFTP_BLKSIZE range on set [171]
o setopt: remove outdated cookie comment [64]
o setopt: remove superfluous use of ternary expressions [169]
o socks: better buffer size checks for socks4a user and hostname [20]
o socks: make SOCKS5 use the CURLOPT_IPRESOLVE choice [38]
o symbols-in-versions: the CLOSEPOLICY options are deprecated
o test1683: remove commented-out check alternatives
o test3103: add missing quotes around a test tag attribute
o test613: stop showing an error on missing output file
o tests/README: SOCKS tests are not using OpenSSH, it has its own server [48]
o tests/server: add more SOCKS5 handshake error checking [27]
o tests: Fix Windows test helper tool search & use it for handle64 [17]
o tidy-up: casing typos, delete unused Windows version aliases [144]
o tool: fix --capath when proxy support is disabled [28]
o tool: support bold headers in Windows [117]
o tool_cb_hdr: add an additional parsing check [129]
o tool_cb_prg: make the carriage return fit for wide progress bars [159]
o tool_cb_wrt: fix write output for very old Windows versions [24]
o tool_getparam: limit --rate to be smaller than number of ms [3]
o tool_operate: do not mix memory models [108]
o tool_operate: fix links in ipfs errors [22]
o tool_parsecfg: make warning output propose double-quoting [164]
o tool_urlglob: fix build for old gcc versions [25]
o tool_urlglob: make multiply() bail out on negative values [11]
o tool_writeout_json: fix JSON encoding of non-ascii bytes [179]
o transfer: abort pause send when connection is marked for closing [183]
o transfer: avoid calling the read callback again after EOF [130]
o transfer: only reset the FTP wildcard engine in CLEAR state [42]
o url: don't touch the multi handle when closing internal handles [40]
o url: find scheme with a "perfect hash" [141]
o url: fix `-Wzero-length-array` with no protocols [147]
o url: fix builds with `CURL_DISABLE_HTTP` [148]
o url: protocol handler lookup tidy-up [66]
o url: proxy ssl connection reuse fix [94]
o urlapi: avoid null deref if setting blank host to url encode [75]
o urlapi: skip appending NULL pointer query [74]
o urlapi: when URL encoding the fragment, pass in the right length [59]
o urldata: make maxconnects a 32 bit value [166]
o urldata: move async resolver state from easy handle to connectdata [34]
o urldata: move cookielist from UserDefined to UrlState [126]
o urldata: move hstslist from 'set' to 'state' [105]
o urldata: move the 'internal' boolean to the state struct [39]
o vssh: remove the #ifdef for Curl_ssh_init, use empty macro
o vtls: cleanup SSL config management [78]
o vtls: consistently use typedef names for OpenSSL structs [176]
o vtls: late clone of connection ssl config [60]
o vtls: use ALPN "http/1.1" for HTTP/1.x, including HTTP/1.0 [102]
o VULN-DISCLOSURE-POLICY: escape sequences are not a security flaw [110]
o windows: use built-in `_WIN32` macro to detect Windows [163]
o wolfssh: remove redundant static prototypes [168]
o wolfssl: add default case for wolfssl_connect_step1 switch [49]
o wolfssl: require WOLFSSL_SYS_CA_CERTS for loading system CA [10]
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Bennée [Wed, 20 Dec 2023 16:14:50 +0000 (16:14 +0000)]
qemurunner: more cleanups for output blocking
If we are only tracking stdout and are not using self.readsock we end
up throwing an exception blocking further action from the thread. Fix
this by checking self.readsock is not None first.
While we are at it split even into fd, event to make things clearer
and handle the fail path of stringify_event by echoing the hex value
of the unknown flag.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Cc: Mikko Rapeli <mikko.rapeli@linaro.org> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 19 Dec 2023 21:24:57 +0000 (21:24 +0000)]
qemu: Ensure pip and the python venv aren't used for meson
Qemu wants to use a supported python version and a specific meson version
to "help" users and uses pip and creates a venv to do this. This is a nightmare
for us. Our versions stay up to date and should be supported so we don't
really need/want this wrapping. Tweak things to disable it.
which would crash. The issue is the change in configuration removes pieces
from the sysroot but pyc files remainm as do pieces of pip which causes
problems.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The PGO (Profile-guided Optimization) collect data about the typical execution of a program
and then use this data to inform optimizations such as inlining, machine-code layout,
register allocation, etc.
This optimization is by default disabled in rust sources but enabled in Yocto and causing
the reproducibility issue in rustdoc binary. To fix the issue this optimization is set to
it's default 'false'.
More about the optimization: https://doc.rust-lang.org/rustc/profile-guided-optimization.html
With the reproducibility issue fixed, we can enable the reproducibility tests again.
Signed-off-by: Sundeep KOKKONDA <sundeep.kokkonda@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Watt [Mon, 18 Dec 2023 22:23:48 +0000 (15:23 -0700)]
libinput: Add packageconfig for tests
Add packageconfig to control if tests are installed or not. Doing this
allows the libcheck dependency to be optional. The packageconfig
defaults to having tests enabled when PTEST_ENABLED == 1 to match the
previous behavior
Peter Marko [Sat, 16 Dec 2023 18:55:04 +0000 (19:55 +0100)]
dtc: preserve version also from shallow git clones
Since switch from Makefile to meson based build,
the version is no longer hardcoded but queried from git tag.
This works only if git history is available.
When shallow tarballs are used, tag is not available.
Example error for trusted-firmware-a from meta-arm:
dtc version too old (039a994), you need at least version 1.4.4
Backport also patch to fix version in meson file.
Signed-off-by: Peter Marko <peter.marko@siemens.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mingli Yu [Tue, 19 Dec 2023 02:47:14 +0000 (10:47 +0800)]
python3-license-expression: Fix the ptest failure
Fix the below ptest failure:
self = <test_skeleton_codestyle.BaseTests testMethod=test_skeleton_codestyle>
def test_skeleton_codestyle(self):
"""
This test shouldn't run in proliferated repositories.
"""
setup_cfg = configparser.ConfigParser()
setup_cfg.read("setup.cfg")
> if setup_cfg["metadata"]["name"] != "skeleton":
tests/test_skeleton_codestyle.py:22:
self = <configparser.ConfigParser object at 0x7fd87cf55110>, key = 'metadata'
def _getitem_(self, key):
if key != self.default_section and not self.has_section(key):
> raise KeyError(key)
E KeyError: 'metadata'
Robert Yang [Fri, 15 Dec 2023 13:47:27 +0000 (05:47 -0800)]
nfs-utils: Update Upstream-Status
Update Upstream-Status for 0001-reexport.h-Include-unistd.h-to-compile-with-musl.patch.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lucas Stach [Fri, 15 Dec 2023 13:37:36 +0000 (14:37 +0100)]
mesa: upgrade 23.2.1 -> 23.3.1
- build amd vulkan driver for x86 platforms
- drop included patch
[https://gitlab.freedesktop.org/mesa/mesa/-/blob/1fbdd37d4c1133ced5eb9812daa1fff04cbf5daa/meson.build#L1711]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libcap-ng-python: depend on setuptools to obtain distutils copy
Upstream has made the needed fixes (not easy to backport), but
hasn't released a new version with them. Distutils has been
removed from the core python library in 3.12.0.
Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gobject-introspection: depend on setuptools to obtain distutils module
g-i still uses distutils in various places, and upstream MRs and tickets
aren't getting a lot of traction. As distutils is gone from the core
library in python 3.12, rely on setuptools copy.
Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 14 Dec 2023 17:18:06 +0000 (17:18 +0000)]
python3: re-enable profile guided optimisation
This was accidentally disabled in the 3.7.2 upgrade in 2019[1] where PGO
was made target-only. Change the wrapper script generation so that it
happens in all environments but class-native.
Ross Burton [Thu, 14 Dec 2023 14:55:59 +0000 (14:55 +0000)]
machine/arch-armv9: remove crc and sve tunes, they are mandatory
As per the Arm ARM section A2.3.2, FEAT_CRC32 is mandatory in Armv8.1
onwards, so there's no need to have an explicit optional tune for it.
SVE (which was a choice here) and SVE2 (which was not) are both optional
with v9.0, but GCC's -march=armv9-a defaults to enabling both SVE and
SVE2 on the grounds that there are no implementations of Armv9 that
don't support SVE2. This means there's no point having an explicit sve
feature as it's enabled out of the box.
Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Wed, 13 Dec 2023 20:40:55 +0000 (12:40 -0800)]
qemu: Add packageconfig knob to enable pipewire support
This gets into a quessing mode if not specified and it it probelamactic
for native version since it maybe built on a machine having pipewire
installed and used on another where pipewire is not installed (
minimal CI builder ) it ends up with
runqemu - ERROR - Failed to run qemu: /mnt/b/yoe/master/build/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-x86_64: error while loading shared libraries: libpipewire-0.3.so.0: cannot open shared object file: No such file or directory
Ross Burton [Wed, 13 Dec 2023 18:22:37 +0000 (18:22 +0000)]
images: add core-image-initramfs-boot
Add a minimal initramfs image recipe that just contains enough initramfs
to find the real root filesystem and pivot to it.
BSPs can use MACHINE_EXTRA_RRECOMMENDS to pull in any kernel module
packages that are required to bring up the hardware so that the rootfs
can be found.
Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lee Chee Yang [Wed, 13 Dec 2023 01:10:54 +0000 (09:10 +0800)]
perl: 5.38.0 -> 5.38.2
update include fix for CVE-2023-47100.
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Lee Chee Yang <chee.yang.lee@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Fri, 8 Dec 2023 03:04:10 +0000 (19:04 -0800)]
gdb: Update to gdb 14.1 release
* Drop add-missing-ldflags.patch, its already applied to gdb 14
* Add dependency on mpfr for cross/cross-canadian/target recipe
* Remove gcc-only complier restriction, clang can compile it just fine
* Notable changes are here [1] [2]
Richard Purdie [Tue, 19 Dec 2023 16:04:24 +0000 (16:04 +0000)]
testimage: Drop target_dumper and most of monitor_dumper
The target_dumper code is basically broken. It has been reading binary files
over the text base serial communication and runs at every command failure which
makes no sense. Each run might overwrite files from the previous run and the
output appears corrupted due to confusion from the binary data.
For now, remove the commands and the target dumper code as the command
and execution point are problematic. Also remove the same pieces of the monitor
code but leave the command list since in theory this can be moved to a more
useful place in the code.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Whilst debugging an autobuilder failure, I wondered why it was rebuilding qemu-system-native
instead of reusing from sstate. The reason was it was overwriting DISTRO_FEATURES,
in this case removing opengl which caused much to rebuild.
The test doesn't need that so don't do it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 18 Dec 2023 15:14:08 +0000 (15:14 +0000)]
qemurunner: Improve handling of serial port output blocking
Similar to stdout in the previous commit, we need to ensure serial output
if written is read and put somewhere, else qemu might block on writes to
the serial port leading to hangs in the kernel. Use our existing logging
thread to log data when run_serial is not in use.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Mon, 18 Dec 2023 12:18:45 +0000 (12:18 +0000)]
qemurunner: Improve stdout logging handling
We need to ensure we read from and log the output from qemu stdout
as otherwise the buffers can fill and block, leading qemu to hang.
Use our existing logging thread to do this.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Tue, 19 Dec 2023 14:29:32 +0000 (14:29 +0000)]
testimage: Exclude wtmp from target-dumper commands
wtmp is filled with binary data which the run_serial command can't cope with.
Catting this results in confusion of the serial interface and potentially large
backlogs of data in the buffers which can hang qemu.
Exclude the problematic files from the command.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Victor Kamensky [Mon, 18 Dec 2023 06:07:57 +0000 (22:07 -0800)]
systemtap: fix libdebuginfod auto detection logic
Addresses an issue when systemtap is built in situation where debuginfod
is not part of DISTRO_FEATURES and latest SystemTap has problem of
auto detecting libdebuginfod library as it was reported by Martin
Jansa in [1].
After systemtap commit 2e67b053e3796ee7cf29a39f9698729b52078406
"configury: rework debuginfod searches" automatic detection of
libdebuginfod is broken. Let's handle it explicitly with debuginfod
package feature. It is good to have such feature anyway.
Signed-off-by: Victor Kamensky <victor.kamensky7@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Watt [Fri, 15 Dec 2023 20:34:04 +0000 (13:34 -0700)]
rpcbind: Specify state directory under /run
The state directory must be correctly specified as under /run because
RequiresMountsFor doesn't follow symbolic links which means the unit may
run before /run is mounted if the default of /var/run/rpcbind is kept
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joshua Watt [Mon, 18 Dec 2023 15:38:02 +0000 (08:38 -0700)]
bitbake.conf: Add runtimedir
Adds the path to the runtime state directory (/run). In particular,
systemd units need to have the correct path to the runtime directory
because RequiresMountsFor doesn't follow symbolic links. This means that
if a unit calls out a directory in /var/run (a symbolic link to /run),
it may actually start before /run is mounted. The fix is to have the
unit specify a directory in /run instead.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tim Orling [Sun, 17 Dec 2023 05:41:33 +0000 (21:41 -0800)]
oeqa: add "maturin develop" SDK test case
'maturin develop' first checks that a virtual environment
has been created, which is a good test for our python3 SDK
environment ;)
Source for guessing-game lifted from https://www.maturin.rs/tutorial
The test case is expected to fetch any necessary crates, build a
development version of the crate and package it as a wheel
Needs at a minimum the following in e.g. local.conf:
TOOLCHAIN_HOST_TASK:append = " nativesdk-python3-maturin"
SDK_INCLUDE_TOOLCHAIN = '1'
SDK_TOOLCHAIN_LANGS += 'rust'
The output of 'maturin develop' should be something like:
...
🔗 Found pyo3 bindings with abi3 support for Python ≥ 3.8
🐍 Not using a specific python interpreter
📡 Using build options features from pyproject.toml
...
Compiling guessing-game v0.1.0 (/path/to/guessing-game)
Finished dev [unoptimized + debuginfo] target(s) in 7.14s
📦 Built wheel for abi3 Python ≥ 3.8 to /path/to/tmpdir/guessing_game-0.1.0-cp38-abi3-linux_x86_64.whl
🛠 Installed guessing-game-0.1.0
Signed-off-by: Tim Orling <tim.orling@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tim Orling [Sun, 17 Dec 2023 05:41:28 +0000 (21:41 -0800)]
python3-maturin: bzip2-sys reproduciblility
The /usr/bin/.debug/maturin binary ends up with the path
to the bzip-sys (bzip2-1.0.8) source in the python3-maturin-dbg package
Fix this by mapping the debug path for CARGO_HOME
to TARGET_DBGSRC_DIR/cargo_home via CFLAGS. This is
required because the bzip-sys crate is compiled using
the cc crate and we override default CFLAGS.
Signed-off-by: Tim Orling <tim.orling@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tim Orling [Sun, 17 Dec 2023 05:41:27 +0000 (21:41 -0800)]
python3-maturin: add v1.4.0
Build and publish crates with pyo3, rust-cpython, cffi and uniffi bindings
as well as rust binaries as python packages.
This project is meant as a zero configuration replacement for setuptools-rust
and milksnake. It supports building wheels for python 3.7+ on windows, linux,
mac and freebsd, can upload them to pypi and has basic pypy and graalpy support.
https://github.com/pyo3/maturin
* Referesh -crates.inc for 1.4.0
Signed-off-by: Tim Orling <tim.orling@konsulko.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
oeqa/selftest/sstatetests: re-work CDN tests, add local cache tests
With the rework of printdiff, it is not longer useful for checking
absence of sstate objects in a remote http cache, as it would only
report the top level missing signatures, and leave the recursive
investigation to diffsigs (which relies on ability to list cache
files - not available over http).
The CDN check can be performed by simply running 'bitbake -DD -n'
which is very verbose, but neverthless reports the amount
of missing sstate objects and what they are in a way that can
be programmatically extracted and checked (as suggested by RP).
This also adds local sstate tests, as they can be useful to
determine whether the missing cdn objects were never created or
erroneously cleaned up, or if they were created but didn't propagate
to cdn.
[YOCTO #15303]
Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
devtool: modify: Handle recipes with a menuconfig task correctly
This avoids the following error when running `devtool modify` on a
recipe that has a menuconfig task, but does not have
KCONFIG_CONFIG_ENABLE_MENUCONFIG set.
.../temp/run.do_configure.4163366: line 152:
${@ oe.types.boolean('${KCONFIG_CONFIG_ENABLE_MENUCONFIG}') }: bad substitution
WARNING: .../temp/run.do_configure.4163366:152 exit 1 from
'[ ${@ oe.types.boolean('${KCONFIG_CONFIG_ENABLE_MENUCONFIG}') } = True ]'
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Khem Raj [Thu, 14 Dec 2023 19:34:36 +0000 (11:34 -0800)]
util-linux: Delete md-raid tests
These tests are marked as known failures upstream as well [1]
if we delete them then we can drop dependency on mdadm for ptests which
can further reduce the dependency chain for ptest enabled minimal images
Yoann Congal [Wed, 13 Dec 2023 08:56:58 +0000 (09:56 +0100)]
strace: Disable bluetooth support by default
The bluetooth support adds a bluez5 dependency (and,recursively, a lot
of other stuff). Disable it by default to avoid having to build all of
this when it is not needed.
This decrease the number of tasks run for a core-image-minimal build by
~1000 (-21%).
To re-enable bluetooth support in strace, add "bluez" to strace
PACKAGECONFIG. For example, in local.conf:
PACKAGECONFIG:append:pn-strace = " bluez"
Fixes [YOCTO #15323]
[RP: Tweaked to put a message about the change in the recipe] Signed-off-by: Yoann Congal <yoann.congal@smile.fr> Suggested-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Richard Purdie [Sun, 10 Dec 2023 09:33:17 +0000 (09:33 +0000)]
sstate: Fix dir ownership issues in SSTATE_DIR
We currently use mkdir -p to create missing parent directories within SSTATE_DIR.
Reading the man page for mkdir mentions that parent directories are created with
the current umask, *not* the mode passed upon the commandline.
We could fix this by setting and resetting the umask but since we already have
decent python code able to do this, move to using that injecting a python function
into the chain of functions already present.
This should help fix the occasional sstate directory creation with the wrong
permissions.
[YOCTO #14385]
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Wed, 13 Dec 2023 20:30:14 +0000 (20:30 +0000)]
runqemu: add qmp socket support
Add support for qmp sockets and defaults to unix:qmp.sock if unspecified
Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Eilís 'pidge' Ní Fhlannagáin <pidge@baylibre.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add new file for C and C++ build tools. The initial implemmentation
contains a class for CMake and one for Meson. At least these first
tests for the qemu-usermode share most of the code. That's why there
is only one c_ccp.py file and not for example a cmake.py and a
meson.py file.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This simple C++ project supports compilation with CMake and Meson.
(Autotool support could be added later on.)
It's supposed to be used with oe-selftest.
An artificial project has several advantages over compiling a normal
CMake or Meson based project for testing purposes:
- It is much faster because it can be kept minimalistic
- It can cover multiple odd corner cases
- No one will change it in an unpredictable way
- It can support multiple build tools with only one C++ codebase
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make the cmake-qemu.bbclass more usable:
- Drop the CMAKE_EXEWRAPPER_ENABLED variable (which does not make much
sense without the second commit of the original patch series).
- Inherit qemu to make the cmake-qemu a drop in replacement for cmake.
Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Alex Kiernan [Fri, 8 Dec 2023 14:03:44 +0000 (14:03 +0000)]
rust: Upgrade 1.70.0 -> 1.71.0
Switch libstd-rs to use the dummy `sysroot` crate which represents the
standard library crates. Target getrandom-open64.patch at 0.2.8 (merged
for 0.2.9). Drop bootstrap_fail.patch (backport merged).
Yash Shinde [Fri, 8 Dec 2023 14:03:43 +0000 (14:03 +0000)]
rust: Disable rust oe-selftest
After rust is upgraded to 1.71 and later versions, the rust oe-selftest gives
build errors due to unstable nightly options(see the error mentioned below). Thus, disable the test suite
until the issue is fixed
error: the option `Z` is only accepted on the nightly compiler
thread 'main' panicked at 'failed to gather the target spec for x86_64-poky-linux-gnu', synthetic_targets.rs:66:9
Following issues are created in Yocto bugzilla and rust upstream to track this issue-
Julien Stephan [Mon, 11 Dec 2023 17:01:38 +0000 (18:01 +0100)]
oeqa/selftest/recipetool: fix metadata corruption on meta layer
[YOCTO #15314]
test_recipetool_appendsrcfile_update_recipe_basic is using base-files as
test recipe but modifies it directly which can corrupt metadata for other
tests relying on this recipe.
So use mtd-utils-selftest as test recipe from meta-selftest to avoid
this kind of issues
Signed-off-by: Julien Stephan <jstephan@baylibre.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Robert Yang [Mon, 11 Dec 2023 15:13:17 +0000 (07:13 -0800)]
archiver.bbclass: Improve work-shared checking
There are other recipes except the listed ones which use work-shared, improve
the checking to make other recipes such as llvm-project-source work with
do_ar_patched.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Ross Burton [Mon, 11 Dec 2023 13:49:46 +0000 (13:49 +0000)]
go: set vendor in CVE_PRODUCT
It's not uncommon for specific third party modules to use "go" as the
product[1]. However, the canonical CPE for the official Go
language/runtime is always golang:go[2], so use that explicitly.
[1] e.g. https://nvd.nist.gov/vuln/detail/CVE-2023-49292
[2] e.g. https://nvd.nist.gov/vuln/detail/CVE-2023-39320
Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Dhairya Nagodra [Mon, 11 Dec 2023 10:05:00 +0000 (02:05 -0800)]
cve-update-nvd2-native: increase the delay between subsequent request failures
Sometimes NVD servers are unstable and return too many errors.
There is an option to have higher fetch attempts to increase the chances
of successfully fetching the CVE data.
Additionally, it also makes sense to progressively increase the delay
after a failed request to an already unstable or busy server.
The increase in delay is reset after every successful request and
the maximum delay is limited to 30 seconds.
Dhairya Nagodra [Mon, 11 Dec 2023 10:04:59 +0000 (02:04 -0800)]
cve-update-nvd2-native: faster requests with API keys
As per NVD, the public rate limit is 5 requests in 30s (6s delay).
Using an API key increases the limit to 50 requests in 30s (0.6s delay).
However, NVD still recommends sleeping for several seconds so that the
other legitimate requests are serviced without denial or interruption.
Keeping the default sleep at 6 seconds and 2 seconds with an API key.
For failures, the wait time is unchanged (6 seconds).
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
