Chong Lu [Tue, 22 Jul 2014 03:16:52 +0000 (11:16 +0800)]
adt-installer: fix sed input file error
When use default install directory, we can't get the environment setup
script path. The reason is that opkg-cl list incorrect files paths.
This patch sets env_script variable to make us get correct environment
setup script path.
When building out a systemd based image, the udev-hwdb postinstall
script always fails at rootfs time. This is because that the 'udevadm'
command used in udev-hwdb postinstall script is now in the udev
package and udev recommends udev-hwdb.
Instead of letting udev recommends udev-hwdb, we let systemd do it
and make udev-hwdb rdepend on udev.
In systems where bash is not installed and /bin/sh is provided by
busybox. Commands like `su -l -c '/home/root/test' xuser' would fail
complaining the the 'su' applet could not be found.
This patch references the old version of shadow to keep the behaviour
the way it was in old version so that we would avoid the problem mentioned
above.
Darren Hart [Mon, 21 Jul 2014 23:46:50 +0000 (23:46 +0000)]
mkefidisk.sh: Add signal handling
Add basic signal handling to unmount and remove any temporary files.
Correct a quoting issue with the die() function caught testing signal
handling.
Fix a minor typo in "formatting" output.
Ben Shelton [Mon, 21 Jul 2014 16:53:47 +0000 (11:53 -0500)]
busybox: mdev: Ensure /dev/initctl exists after tmpfs mount
During boot, there is a brief window during which /dev/initctl is
missing, which breaks initscripts that would need to access it. This
occurs because /etc/init.d/mountall.sh (rcS.d/S02...) attempts to ensure
/dev/initctl is present, but /etc/init.d/mdev (rcS.d/S06...) mounts over
/dev and clobbers the work done by mountall, and then does not wait
synchronously until initctl is ready before continuing.
To close this window, in /etc/init.d/mdev, we check whether /dev/initctl
is present, and if not, we remove it and recreate it. This is the same
thing that is done by /etc/init.d/mountall.sh, and we have verified that
any writers of /dev/initctl will wait synchronously until sysvinit
notices the change in fd and does the read, so no race exists.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bill Pittman [Mon, 21 Jul 2014 16:53:46 +0000 (11:53 -0500)]
busybox: mdev: Use mdev.seq
/dev/mdev.seq exists to synchronize concurrently running instances of
mdev and to ensure that they execute in the proper order. Without this
synchronization, it is possible to have inconsistent mount points, to
leak device nodes, or to have a node erroneously removed in rapid
hotplug scenarios.
Enable the use of mdev.seq by creating an empty /dev/mdev.seq at boot.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren Hart [Mon, 21 Jul 2014 16:12:48 +0000 (09:12 -0700)]
mkefidisk.sh: Remove initrd entry for gummiboot
My previous patch adding gummiboot support was missing the line to
remove the initrd line from the boot config. This was an oversight in
copying over the grub setup to gummiboot. Add the necessary logic to
remove it.
image.bbclass/rootfs.py: add variables to rootfs[vardeps]
Added base variables and package backend specific variables to
rootfs[vardeps] in order for rootfs to rebuild when changes are made.
Set some variables as [func] to inform bitbake that they are shell
scripts, so that it invokes its shell dependency parsing. Without
marking them as functions, changes in the actual function body would
not trigger rootfs rebuilds.
Alexandru DAMIAN [Fri, 18 Jul 2014 11:07:22 +0000 (12:07 +0100)]
bitbake: toasterui: fixing event.data clash
This patch fixes a name collision on the event.data
in the MetadataEvent class. event.data is used in the
event system as a copy of "d" in certain situations,
and this collision triggered a bug leading to data loss.
Alexandru DAMIAN [Thu, 17 Jul 2014 14:30:17 +0000 (15:30 +0100)]
bitbake: toaster-requirements.txt: document requirements for the python environment
Since Toaster adds a number of specific requirements managed
by pip, we document these requirements in order to be able
to run bitbake and toaster under virtualenv. The target here
is to break the dependency on distro packages for specific
python libraries.
In order to start bitbake/Toaster in a distro-independent manner,
we use virtualenv and pip. We add venv to the .gitignore list
to make room for the virtualenv deployment in this directory.
Use this command sequence to setup the virtualenv:
bitbake and Toaster will then run normally under virtualenv.
We also fix bugs related to toaster starting in managed mode
through this script:
* toaster will not use bldcontrol application in interactive mode
* a proper message will be displayed if toaster detects a managed
start request in a build environment
Alexandru DAMIAN [Tue, 15 Jul 2014 18:31:10 +0000 (19:31 +0100)]
bitbake: toaster: properly set layers when running a build
This patch enables the localhost build controller to
properly set the layers before the build runs.
It creates the checkout directories under BuildEnvironment
sourcedir directory, and runs the build in the buildir
directory.
Build launch errors are tracked in the newly added BRError table.
These are different from build errors, in the sense that the
build can't start due to these errors.
Alexandru DAMIAN [Mon, 30 Jun 2014 17:33:04 +0000 (18:33 +0100)]
bitbake: toaster: add project main edit page
This is the first commit on the project main edit page.
At this point we have:
* the default settings for a newly created project
* the ability to add targets
* the ability to trigger a build command, and have
the build executed
Project layers now have an optional field, allowing for
removal. Default meta, meta-yocto and meta-yocto-bsp
layers cannot be optional.
We add XHR calls for interactivity in the main page.
Alexandru DAMIAN [Tue, 15 Jul 2014 11:35:43 +0000 (12:35 +0100)]
bitbake: toaster: add fields for sourcedir and builddir paths
We add explicit absolute paths for a directory where
the layer sources will be checked out (sourcedir) and
where the build activities will take place.
Adding minimal checking when starting the application in
order to make sure that BuildEnvironment (BE) settings are
usable. This check is ran by the toaster script at startup.
Modify the localhost bbcontroller to use the BE settings
instead of trying to self-configure on checked out sources.
Scott Rifenbark [Wed, 23 Jul 2014 06:28:16 +0000 (09:28 +0300)]
dev-manual: Added the section on "Creating Partitioned Images"
This is the section on 'wic'. I have dropped in the same exact
section from the 1.5.3 (dora branch) release as a starting point
for Tom Zanussi to scrub and update for the master branch.
Scott Rifenbark [Mon, 7 Jul 2014 06:11:34 +0000 (09:11 +0300)]
bitbake: Updated the the example 'bitbake -h' output to match the actual output, which has been recently patched to fix the '-S SIGNATURE_HANDLER, --dump-signatures=SIGNATURE_HANDLER' option.
Note also, that I have added a new option that has since appeared
in the output but was not in the manual's example. That option
added is '--token=XMLRPCTOKEN'.
The fetcher uses the rcleartool or cleartool remote client, depending on which one is available.
Supported SRC_URI options are:
- vob
(required) The name of the clearcase VOB (with prepending "/")
- module
The module in the selected VOB (with prepending "/")
The module and vob parameters are combined to create
the following load rule in the view config spec:
load <vob><module>
- proto
http or https
Related variables:
CCASE_CUSTOM_CONFIG_SPEC
Write a config spec to this variable in your recipe to use it instead
of the default config spec generated by this fetcher.
Please note that the SRCREV loses its functionality if you specify
this variable. SRCREV is still used to label the archive after a fetch,
but it doesn't define what's fetched.
User credentials:
When using cleartool:
The login of cleartool is handled by the system. No special steps needed.
When using rcleartool:
In order to use rcleartool with authenticated users an `rcleartool login` is
necessary before using the fetcher.
Richard Purdie [Mon, 21 Jul 2014 08:35:53 +0000 (09:35 +0100)]
bitbake: command/runqueue: Fix shutdown logic
If you hit Ctrl+C at the right point, the system processes the request
but merrily continues building. It turns out finish_runqueue() is called
but this doesn't stop the later generation and execution of the
runqueue.
This patch adjusts some of the conditionals to ensure the build really
does stop.
Scott Rifenbark [Mon, 7 Jul 2014 06:41:24 +0000 (09:41 +0300)]
ref-manuala: Updates to support links to BB manual
Discovered that the sed file was processing the bitbake-user-manual
just like the others, which was wrong. the BB manual is not included
in the mega-manual so the links there need to be left alone. The fix
included specially creating substitution lines to handle all the YP
docs while excluding the BB manual.
Otavio Salvador [Fri, 18 Jul 2014 16:47:06 +0000 (13:47 -0300)]
alsa-tools: Disable use of GTK+ when not using X11
The GTK+3 does not provide support for DirectFB backend so we cannot
enable GTK+ features of alsa-tools in this case; GTK+2 does not provide
support for Wayland.
This patch changes GTK+ support to be enabled only when X11 support is
enabled.
buildtools-tarball: Add wget to buildtools-tarball
GNU Wget cannot be upgrated to a newer that 1.12 version on supported
Centos distro. GNU Wget 1.12 and earlier uses a server-provided filename
instead of the original URL to determine the destination filename of a
download.
This means the files downloaded when fetching cannot be properly used:
$ wget http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz
$ ls
eventlog_0.2.13.tar.gz?AWSAccessKeyId=AKIAICTJ5MANGPMOH7JA&Expires=1400838672&Signature=TjakOBpOvHtEKKDgF14iVinWpY0=
This in turn lead to build errors like:
WARNING: Failed to fetch URL http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz, attempting MIRRORS if available
ERROR: Fetcher failure for URL: 'http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz'. The fetch command returned success for url http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz but /path/to/downloads/eventlog_0.2.13.tar.gz doesn't exist?!
ERROR: Function failed: Fetcher failure for URL: 'http://www.balabit.com/downloads/files/syslog-ng/open-source-edition/3.4.2/source/eventlog_0.2.13.tar.gz'. Unable to fetch URL from any source.
ERROR: Logfile of failure stored in: /path/to/tmp/work/ppce500v2-enea-linux-gnuspe/eventlog/0.2.13-r0/temp/log.do_fetch.28302
ERROR: Task 4 (/path/to/poky/meta-openembedded/meta-oe/recipes-support/eventlog/eventlog_0.2.13.bb, do_fetch) failed with exit code '1'
The so files installed by libomxil are not versioned and should
be installed without version-based symlinks so that omxregister-bellagio
can properly find and register them.
Robert Yang [Fri, 4 Jul 2014 05:39:04 +0000 (22:39 -0700)]
bitbake: bitbake: update help message for dump-signatures
The bitbake -S had been updated which always reuires an argument, so
update the help info:
- Add the two args in the help message: none and printdiff
- Use type="choice" so that we can get more friendly error messages,
for example:
bitbake: error: option -S: invalid choice: 'printdiffX' (choose from 'none', 'printdiff')
Scott Rifenbark [Thu, 10 Jul 2014 07:38:39 +0000 (10:38 +0300)]
bitbake: bitbake-user-manual-metadata.xml: KERNEL_FEATURES example updated.
I added text to separate this example code from the general
BitBake User Manual's spirit of standing alone and away from
YP or OE stuff. Also, added another space to move the examples
code so that 5 spaces are used for literal indentation.
Robert P. J. Day [Thu, 10 Jul 2014 07:23:32 +0000 (10:23 +0300)]
bitbake: bitbake-user-manual-metadata.xml: Added second conditional metadata example.
I think having a couple real-life examples here would make a huge
difference.
Comment from Scott: I modified the example description to indicate
that it is from an OpenEmbedded metadata-based recipe (i.e from
YP). We have been trying very hard to keep the BitBake User
Manual as separate as possible from the YP docs.
Peter Seebach [Fri, 18 Jul 2014 18:49:25 +0000 (13:49 -0500)]
pseudo: uprev to 1.6.1
Pseudo now automatically tries to shut down the server after running
single commands under pseudo ("pseudo <cmd>"), which means it can
print a useless "server already offline" message in some cases. The
message has been changed to a debugging message only.
The glibc symbol versions for memcpy were being applied to non-x86
targets, unintentionally, which broke builds for at least some targets.
(But pseudo doesn't usually get built for targets so it didn't
get noticed right away.)
Darren Hart [Fri, 18 Jul 2014 23:01:52 +0000 (23:01 +0000)]
kernelshark: Remove trace-cmd from the kernelshark package
Fixes [YOCTO 6550]
Images installing both trace-cmd and kernelshark would fail with:
error: file /usr/bin/trace-cmd conflicts between attempted installs of
kernelshark-1.2+git0+7055ffd37b-r3.core2_32 and
trace-cmd-1.2+git0+7055ffd37b-r3.core2_32
This patch removes ${bindir}/trace-cmd from the install prior to
packaging, as is already done with the ${datadir}.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
(cherry picked from commit eb08ae8f729ef77329892d19b23ddfdaa7953de0) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Thu, 17 Jul 2014 16:41:18 +0000 (17:41 +0100)]
xf86-video-intel: disable non-deterministic tests for libX11
libX11 et al are checked for at confgure time and tests optionally built. As
these don't get installed we don't want to add build dependencies, but the
non-determinism means that builds can fail.
Ming Liu [Tue, 15 Jul 2014 05:26:59 +0000 (13:26 +0800)]
insane.bbclass: avoid QA errors for n32 kernel
A series of commits had been integrated to avoid qa checking code
throwing the bitsize not matched error for x32 kernel files, the
same logic is also needed by n32 kernel which was not addressed in
that series.
This commit extends the condition for n32 kernel files.
Signed-off-by: Ming Liu <ming.liu@windriver.com> Signed-off-by: Saul Wold <sgw@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ting Liu [Wed, 16 Jul 2014 10:35:58 +0000 (18:35 +0800)]
gcc: update *LIBC_* linker relocation reglex
* GLIBC_DYNAMIC_LINKER64 reglex does not work for rs6000/linux64.h,
update it.
* it turns out that UCLIBC_DYNAMIC_LINKER reglex will strip the 32/64
chars from UCLIBC_DYNAMIC_LINKER64/UCLIBC_DYNAMIC_LINKER32, add '\b'.
my two PCs: Centos 6.5 (python 2.7.5) and Fedora 13 (python 2.7.3)
Stopping sshd must only kill the listening (top-level) daemon; it must
not stop any other sshd process, because those are forked ssh
connections which may include e.g. the connection that called
/etc/init.d/sshd stop.
This initscript uses "start-stop-daemon -x <exe>" for starting/stopping.
When that is provided by busybox, this behavior is broken:
`/etc/init.d/sshd stop` stops *all* sshd processes. This was caused by a
fix to busybox 1.20: 17eedcad9406c43beddab3906c8c693626c351fb
"ssd: compat: match -x EXECUTABLE by /proc/pid/exe too".
The fix is to use a pidfile. All initscripts in upstream openssh do this,
as does dropbear.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
eglibc: rewritten tzselect as posix sh and move it to tzcode package
The problem is that this would cause bash installed to meta-toolchain,
the dependencies chain is:
meta-toolchain -> eglibc-utils -> bash
We should eliminate bash dependencies in anything core to a tiny system.
The eglibc-utils also provides eglibc-utils/usr/bin/zdump,
eglibc-utils/usr/bin/zic which all of them belonged to tzcode, so we
should split these three utils as tzcode package.
Darren Hart [Wed, 16 Jul 2014 14:16:02 +0000 (14:16 +0000)]
mkefidisk.sh: Add die() and cleanup() routines
Currently the script will attempt to continue even after a fatal error.
Add a die() routine which will abort in the case of a fatal error and
call a cleanup() routine to unmount any images or devices and remove the
TMPDIR.
Move the variable assignment and directory creation earlier in the
script, making it more obvious what we need to clean up.
Darren Hart [Wed, 16 Jul 2014 14:16:01 +0000 (14:16 +0000)]
mkefidisk.sh: Improve logging
Add logging functions: error, warn, info, and success, using tput to add
color highlighting.
Use these routines throughout the script, replacing echo statements and
adding "|| error" in several places to eliminate silent failures. Add a
simple exit block which checks for issues encountered while running.
Darren Hart [Wed, 16 Jul 2014 14:16:00 +0000 (14:16 +0000)]
mkefidisk.sh: Copy the EFI dir recursively
Rather than only copying the EFI/BOOT dir, copy the entire EFI dir
recursively. This allows for custom configurations to be enabled
implicitly with no extra work required.
Source /etc/default/urandom if present. This allows the rootfs to
remain read-only while enabling the user to override the location of the
random seed file.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initscripts: parametrize random seed file location
Currently, the random seed file location is hardcoded to
/var/lib/urandom/random-seed. Refactor it to a parameter
(RANDOM_SEED_FILE) so the file location is defined in only one place.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
initscripts: save /etc/timestamp with seconds accuracy
Currently, /etc/timestamp is saved with minutes accuracy. To increase
the accuracy, modify the save-rtc.sh and bootmisc.sh scripts to save and
read /etc/timestamp respectively with seconds accuracy.
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com> Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tim Orling [Thu, 17 Jul 2014 23:07:45 +0000 (16:07 -0700)]
libgpg-error: fix pkgconfig.patch
Typo in pkgconfig.patch:
-Libs: -L{libdir} -lgpg-error
vs.
+Libs: -L${libdir} -lgpg-error
This patch fixes failure in libgcrypt-native do_configure.
| ../x86_64-linux-libtool: line 6001: cd: {libdir}: No such file or directory
| x86_64-linux-libtool: link: cannot determine absolute directory name of `{libdir}'
common-mingw: force ac_cv_func_mmap_fixed_mapped=no
The expat mingw build breaks because ix86-common defines
ac_cv_func_mmap_fixed_mapped=yes, causing the build to think that
mmap(), mman.h actually exist. Fix this by always forcing the variable
to "no", which configure would have concluded without such interference.
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
