Thorsten Blum [Mon, 26 Jan 2026 17:47:03 +0000 (18:47 +0100)]
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
Replace multiple for loops with calls to crypto_unregister_aeads(),
crypto_unregister_ahashes(), and crypto_unregister_skciphers().
Remove the definition of atmel_tdes_unregister_algs() because it is
equivalent to calling crypto_unregister_skciphers() directly, and the
function parameter 'struct atmel_tdes_dev *' is unused anyway.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: ccp - Add sysfs attribute for boot integrity
The boot integrity attribute represents that the CPU or APU is used for the
hardware root of trust in the boot process. This bit only represents the
CPU/APU and some vendors have other hardware root of trust implementations
specific to their designs.
Link: https://github.com/fwupd/fwupd/pull/9825 Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jianpeng Chang [Tue, 20 Jan 2026 01:55:24 +0000 (09:55 +0800)]
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
When commit 0e1a4d427f58 ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios.
Weili Qian [Sat, 17 Jan 2026 10:18:06 +0000 (18:18 +0800)]
crypto: hisilicon/qm - increase wait time for mailbox
The device requires more time to process queue stop and function stop
mailbox commands compared to other mailbox commands . In the current
driver, the mailbox processing wait time for queue stop and function
stop is less than the device timeout, which may cause the driver to
incorrectly assume that the mailbox processing has failed. Therefore,
the driver wait time for queue stop and function stop should be set to
be greater than the device timeout. And PF and VF communication
relies on mailbox, the communication wait time should also be modified.
Weili Qian [Sat, 17 Jan 2026 10:18:05 +0000 (18:18 +0800)]
crypto: hisilicon/qm - obtain the mailbox configuration at one time
The malibox needs to be triggered by a 128bit atomic operation.
The reason is that the PF and VFs of the device share the mmio memory
of the mailbox, and the mutex cannot lock mailbox operations in
different functions, especially when passing through VFs to
virtual machines.
Currently, the write operation to the mailbox is already a 128-bit
atomic write. The read operation also needs to be modified to a
128-bit atomic read. Since there is no general 128-bit IO memory
access API in the current ARM64 architecture, and the stp and ldp
instructions do not guarantee atomic access to device memory, they
cannot be extracted as a general API. Therefore, the 128-bit atomic
read and write operations need to be implemented in the driver.
Weili Qian [Sat, 17 Jan 2026 10:18:04 +0000 (18:18 +0800)]
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
Since the HiSilicon accelerator is used only on the
ARM64 architectures, the implementations for other
architectures are not needed, so remove the unnecessary code.
Chenghai Huang [Sat, 17 Jan 2026 10:18:03 +0000 (18:18 +0800)]
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
Before sending the data via the mailbox to the hardware, to ensure
that the data accessed by the hardware is the most up-to-date,
a write barrier should be added before writing to the mailbox register.
The current memory barrier is placed after writing to the register,
the barrier order should be modified to be before writing to the register.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Weili Qian [Sat, 17 Jan 2026 07:18:21 +0000 (15:18 +0800)]
crypto: hisilicon/trng - support tfms sharing the device
Since the number of devices is limited, and the number
of tfms may exceed the number of devices, to ensure that
tfms can be successfully allocated, support tfms
sharing the same device.
Fixes: e4d9d10ef4be ("crypto: hisilicon/trng - add support for PRNG") Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Sat, 17 Jan 2026 02:34:35 +0000 (10:34 +0800)]
crypto: hisilicon/zip - add lz4 algorithm for hisi_zip
Add the "hisi-lz4-acomp" algorithm by the crypto acomp. When the
8th bit of the capability register is 1, the lz4 algorithm will
register to crypto acomp, and the window length is configured to
16K by default.
Since the "hisi-lz4-acomp" currently only support compression
direction, decompression is completed by the soft lz4 algorithm.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: s390/paes - Refuse clear key material by default
This patch exploits the new xflag PKEY_XFLAG_NOCLEARKEY from the pkey
layer. So now by default all the paes algorithms refuse the use of
clear key material ("clear key tokens") in the setkey function with
-EINVAL.
With a new kernel module parameter "clrkey" this behavior can be
controlled. By default clrkey is 'N' but for testing purpose on module
load a true value (1, 'Y') may be given to accept clear key tokens.
Note that during selftest clear keys are always used and thus the
xflag PKEY_XFLAG_NOCLEARKEY is NOT set as long as the algorithm is in
a larval state indicated by crypto_skcipher_tested() returning false.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: s390/phmac - Refuse clear key material by default
This patch exploits the new xflag PKEY_XFLAG_NOCLEARKEY from the pkey
layer. So now by default the phmac refuses the use of clear key
material ("clear key tokens") in the setkey function with
-EINVAL.
With a new kernel module parameter "clrkey" this behavior can be
controlled. By default clrkey is 'N' but for testing purpose on module
load a true value (1, 'Y') may be given to accept clear key tokens.
Note that during selftest clear keys are always used and thus the
xflag PKEY_XFLAG_NOCLEARKEY is NOT set as long as the algorithm is in
a larval state indicated by crypto_ahash_tested() returning false.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
s390/pkey: Support new xflag PKEY_XFLAG_NOCLEARKEY
Introduce a new xflag PKEY_XFLAG_NOCLEARKEY which when given refuses
the conversion of "clear key tokens" to protected key material.
Some algorithms (PAES, PHMAC) have the need to construct "clear key
tokens" to be used during selftest. But in general these algorithms
should only support clear key material for testing purpose. So now the
algorithm implementation can signal via xflag PKEY_XFLAG_NOCLEARKEY
that a conversion of clear key material to protected key is not
acceptable and thus the pkey layer (usually one of the handler
modules) refuses clear key material with -EINVAL.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Tue, 13 Jan 2026 08:31:28 +0000 (09:31 +0100)]
crypto: stm32 - Replace min_t(size_t) with just min()
In most cases, min_t(size_t) and explicit casting are unnecessary
because the values ->hw_blocksize, ->payload_{in,out}, and ->header_in
are already of type 'size_t'. Use the simpler min() macro instead.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Bibo Mao [Tue, 13 Jan 2026 03:05:56 +0000 (11:05 +0800)]
crypto: virtio - Replace package id with numa node id
With multiple virtio crypto devices supported with different NUMA
nodes, when crypto session is created, it will search virtio crypto
device with the same numa node of current CPU.
Here API topology_physical_package_id() is replaced with cpu_to_node()
since package id is physical concept, and one package id have multiple
memory numa id.
Signed-off-by: Bibo Mao <maobibo@loongson.cn> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Bibo Mao [Tue, 13 Jan 2026 03:05:55 +0000 (11:05 +0800)]
crypto: virtio - Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req
With function virtio_crypto_skcipher_crypt_req(), there is already
virtqueue_kick() call with spinlock held in function
__virtio_crypto_skcipher_do_req(). Remove duplicated virtqueue_kick()
function call here.
Fixes: d79b5d0bbf2e ("crypto: virtio - support crypto engine framework") Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Bibo Mao [Tue, 13 Jan 2026 03:05:54 +0000 (11:05 +0800)]
crypto: virtio - Add spinlock protection with virtqueue notification
When VM boots with one virtio-crypto PCI device and builtin backend,
run openssl benchmark command with multiple processes, such as
openssl speed -evp aes-128-cbc -engine afalg -seconds 10 -multi 32
openssl processes will hangup and there is error reported like this:
virtio_crypto virtio0: dataq.0:id 3 is not a head!
It seems that the data virtqueue need protection when it is handled
for virtio done notification. If the spinlock protection is added
in virtcrypto_done_task(), openssl benchmark with multiple processes
works well.
Fixes: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet") Cc: stable@vger.kernel.org Signed-off-by: Bibo Mao <maobibo@loongson.cn> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto: inside-secure/eip93 - unregister only available algorithm
EIP93 has an options register. This register indicates which crypto
algorithms are implemented in silicon. Supported algorithms are
registered on this basis. Unregister algorithms on the same basis.
Currently, all algorithms are unregistered, even those not supported
by HW. This results in panic on platforms that don't have all options
implemented in silicon.
Fixes: 9739f5f93b78 ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Ella Ma [Fri, 9 Jan 2026 15:17:24 +0000 (16:17 +0100)]
crypto: ccp - Fix a crash due to incorrect cleanup usage of kfree
Annotating a local pointer variable, which will be assigned with the
kmalloc-family functions, with the `__cleanup(kfree)` attribute will
make the address of the local variable, rather than the address returned
by kmalloc, passed to kfree directly and lead to a crash due to invalid
deallocation of stack address. According to other places in the repo,
the correct usage should be `__free(kfree)`. The code coincidentally
compiled because the parameter type `void *` of kfree is compatible with
the desired type `struct { ... } **`.
Fixes: a71475582ada ("crypto: ccp - reduce stack usage in ccp_run_aes_gcm_cmd") Signed-off-by: Ella Ma <alansnape3058@gmail.com> Acked-by: Tom Lendacky <thomas.lendacky@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Fri, 9 Jan 2026 12:36:40 +0000 (13:36 +0100)]
crypto: omap - Use sysfs_emit in sysfs show functions
Replace sprintf() with sysfs_emit() in sysfs show functions.
sysfs_emit() is preferred to format sysfs output as it provides better
bounds checking. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Mon, 5 Jan 2026 22:21:53 +0000 (23:21 +0100)]
crypto: ecc - Streamline alloc_point and remove {alloc,free}_digits_space
Check 'ndigits' before allocating 'struct ecc_point' to return early if
needed. Inline the code from and remove ecc_alloc_digits_space() and
ecc_free_digits_space(), respectively.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Airoha uses RAW mode to collect noise from the TRNG. These appear to
be unprocessed oscillations from the tero loop. For this reason, they
do not have a perfect distribution and entropy. Simple noise compression
reduces its size by 9%, so setting the quality to 900 seems reasonable.
The same value is used by the downstream driver.
Compare the size before and after compression:
$ ls -l random_airoha*
-rw-r--r-- 1 aleksander aleksander 76546048 Jan 3 23:43 random_airoha
-rw-rw-r-- 1 aleksander aleksander 69783562 Jan 5 20:23 random_airoha.zip
FIPS test results:
$ cat random_airoha | rngtest -c 10000
rngtest 2.6
Copyright (c) 2004 by Henrique de Moraes Holschuh
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
rngtest: starting FIPS tests...
rngtest: bits received from input: 200000032
rngtest: FIPS 140-2 successes: 0
rngtest: FIPS 140-2 failures: 10000
rngtest: FIPS 140-2(2001-10-10) Monobit: 9957
rngtest: FIPS 140-2(2001-10-10) Poker: 10000
rngtest: FIPS 140-2(2001-10-10) Runs: 10000
rngtest: FIPS 140-2(2001-10-10) Long run: 4249
rngtest: FIPS 140-2(2001-10-10) Continuous run: 0
rngtest: input channel speed: (min=953.674; avg=27698.935; max=19073.486)Mibits/s
rngtest: FIPS tests speed: (min=59.791; avg=298.028; max=328.853)Mibits/s
rngtest: Program run time: 647638 microseconds
In general, these data look like real noise, but with lower entropy
than expected.
Fixes: e53ca8efcc5e ("hwrng: airoha - add support for Airoha EN7581 TRNG") Suggested-by: Benjamin Larsson <benjamin.larsson@genexis.eu> Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
snp_range_list is only used in __sev_snp_init_locked() in the SNP_INIT_EX
case, move the declaration there and add a __free() cleanup helper for it
instead of waiting until shutdown.
Fixes: 1ca5614b84ee ("crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP") Reviewed-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tom Lendacky [Mon, 5 Jan 2026 17:22:17 +0000 (10:22 -0700)]
crypto: ccp - Fix a case where SNP_SHUTDOWN is missed
If page reclaim fails in sev_ioctl_do_snp_platform_status() and SNP was
moved from UNINIT to INIT for the function, SNP is not moved back to
UNINIT state. Additionally, SNP is not required to be initialized in order
to execute the SNP_PLATFORM_STATUS command, so don't attempt to move to
INIT state and let SNP_PLATFORM_STATUS report the status as is.
Fixes: ceac7fb89e8d ("crypto: ccp - Ensure implicit SEV/SNP init and shutdown in ioctls") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Tycho Andersen (AMD) <tycho@kernel.org> Reviewed-by: Alexey Kardashevskiy <aik@amd.com> Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Fri, 19 Dec 2025 14:51:22 +0000 (15:51 +0100)]
crypto: engine - Use unregister_* in register_{aeads,ahashes,skciphers}
Replace the for loops with calls to unregister_aeads(),
unregister_ahashes(), and unregister_skciphers(), respectively. Return
'ret' immediately and remove the goto statements to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Fri, 19 Dec 2025 14:51:21 +0000 (15:51 +0100)]
crypto: lskcipher - Use unregister_lskciphers in register_lskciphers
Replace the for loop with a call to crypto_unregister_lskciphers().
Return 'ret' immediately and remove the goto statement to simplify the
error handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Fri, 19 Dec 2025 14:51:20 +0000 (15:51 +0100)]
crypto: skcipher - Use unregister_skciphers in register_skciphers
Replace the for loop with a call to crypto_unregister_skciphers().
Return 'ret' immediately and remove the goto statement to simplify the
error handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Fri, 19 Dec 2025 14:51:19 +0000 (15:51 +0100)]
crypto: shash - Use unregister_shashes in register_shashes
Replace the for loop with a call to crypto_unregister_shashes(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Fri, 19 Dec 2025 14:51:18 +0000 (15:51 +0100)]
crypto: ahash - Use unregister_ahashes in register_ahashes
Replace the for loop with a call to crypto_unregister_ahashes(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Fri, 19 Dec 2025 14:51:17 +0000 (15:51 +0100)]
crypto: acomp - Use unregister_acomps in register_acomps
Replace the for loop with a call to crypto_unregister_acomps(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Qi Tao [Thu, 18 Dec 2025 13:44:52 +0000 (21:44 +0800)]
crypto: hisilicon/sec2 - support skcipher/aead fallback for hardware queue unavailable
When all hardware queues are busy and no shareable queue,
new processes fail to apply for queues. To avoid affecting
tasks, support fallback mechanism when hardware queues are
unavailable.
Fixes: c16a70c1f253 ("crypto: hisilicon/sec - add new algorithm mode for AEAD") Signed-off-by: Qi Tao <taoqi10@huawei.com> Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Weili Qian [Thu, 18 Dec 2025 13:44:51 +0000 (21:44 +0800)]
crypto: hisilicon/hpre - support the hpre algorithm fallback
When all hardware queues are busy and no shareable queue,
new processes fail to apply for queues. To avoid affecting
tasks, support fallback mechanism when hardware queues are
unavailable.
HPRE driver supports DH algorithm, limited to prime numbers up to 4K.
It supports prime numbers larger than 4K via fallback mechanism.
Chenghai Huang [Thu, 18 Dec 2025 13:44:50 +0000 (21:44 +0800)]
crypto: hisilicon/zip - support fallback for zip
When the hardware queue resource busy(no shareable queue)
or memery alloc fail in initialization of acomp_alg, use
soft algorithm to complete the work.
Fixes: 1a9e6f59caee ("crypto: hisilicon/zip - remove zlib and gzip") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Thu, 18 Dec 2025 13:44:49 +0000 (21:44 +0800)]
crypto: hisilicon/qm - optimize device selection priority based on queue ref count and NUMA distance
Add device sorting criteria to prioritize devices with fewer
references and closer NUMA distances. Devices that are fully
occupied will not be prioritized for use.
Chenghai Huang [Thu, 18 Dec 2025 13:44:48 +0000 (21:44 +0800)]
crypto: hisilicon/qm - add reference counting to queues for tfm kernel reuse
Add reference counting to queues. When all queues are occupied, tfm
will reuse queues with the same algorithm type that have already
been allocated in the kernel. The corresponding queue will be
released when the reference count reaches 1.
Reviewed-by: Longfang Liu <liulongfang@huawei.com> Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Thu, 18 Dec 2025 13:44:47 +0000 (21:44 +0800)]
crypto: hisilicon - consolidate qp creation and start in hisi_qm_alloc_qps_node
Consolidate the creation and start of qp into the function
hisi_qm_alloc_qps_node. This change eliminates the need for
each module to perform these steps in two separate phases
(creation and start).
Chenghai Huang [Thu, 18 Dec 2025 13:44:46 +0000 (21:44 +0800)]
crypto: hisilicon/qm - centralize the sending locks of each module into qm
When a single queue used by multiple tfms, the protection of shared
resources by individual module driver programs is no longer
sufficient. The hisi_qp_send needs to be ensured by the lock in qp.
Fixes: 5fdb4b345cfb ("crypto: hisilicon - add a lock for the qp send operation") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Thu, 18 Dec 2025 13:44:45 +0000 (21:44 +0800)]
crypto: hisilicon/qm - enhance the configuration of req_type in queue attributes
Originally, when a queue was requested, it could only be configured
with the default algorithm type of 0. Now, when multiple tfms use
the same queue, the queue must be selected based on its attributes
to meet the requirements of tfm tasks. So the algorithm type
attribute of queue need to be distinguished. Just like a queue used
for compression in ZIP cannot be used for decompression tasks.
Fixes: 3f1ec97aacf1 ("crypto: hisilicon/qm - Put device finding logic into QM") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
lizhi [Thu, 18 Dec 2025 13:44:44 +0000 (21:44 +0800)]
crypto: hisilicon/hpre: extend tag field to 64 bits for better performance
This commit expands the tag field in hpre_sqe structure from 16-bit
to 64-bit. The change enables storing request addresses directly
in the tag field, allowing callback functions to access request messages
without the previous indirection mechanism.
By eliminating the need for lookup tables, this modification reduces lock
contention and associated overhead, leading to improved efficiency and
simplified code.
Chenghai Huang [Thu, 18 Dec 2025 13:44:43 +0000 (21:44 +0800)]
crypto: hisilicon/sec - move backlog management to qp and store sqe in qp for callback
When multiple tfm use a same qp, the backlog data should be managed
centrally by the qp, rather than in the qp_ctx of each req.
Additionally, since SEC_BD_TYPE1 and SEC_BD_TYPE2 cannot use the
tag of the sqe to carry the virtual address of the req, the sent
sqe is stored in the qp. This allows the callback function to get
the req address. To handle the differences between hardware types,
the callback functions are split into two separate implementations.
Fixes: f0ae287c5045 ("crypto: hisilicon/sec2 - implement full backlog mode for sec") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Thu, 18 Dec 2025 13:44:42 +0000 (21:44 +0800)]
crypto: hisilicon/zip - adjust the way to obtain the req in the callback function
In the shared queue design, multiple tfms use same qp, and one qp
need to corresponds to multiple qp_ctx. So use tag to obtain the
req virtual address. Build a one-to-one relationship between tfm
and qp_ctx. finaly remove the old get_tag operation.
Fixes: 2bcf36348ce5 ("crypto: hisilicon/zip - initialize operations about 'sqe' in 'acomp_alg.init'") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Weili Qian <qianweili@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thomas Fourier [Thu, 18 Dec 2025 10:12:57 +0000 (11:12 +0100)]
crypto: octeontx - fix dma_free_coherent() size
The size of the buffer in alloc_command_queues() is
curr->size + OTX_CPT_NEXT_CHUNK_PTR_SIZE, so used that length for
dma_free_coherent().
Fixes: 10b4f09491bf ("crypto: marvell - add the Virtual Function driver for CPT") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thomas Fourier [Thu, 18 Dec 2025 09:56:45 +0000 (10:56 +0100)]
crypto: cavium - fix dma_free_coherent() size
The size of the buffer in alloc_command_queues() is
curr->size + CPT_NEXT_CHUNK_PTR_SIZE, so used that length for
dma_free_coherent().
Fixes: c694b233295b ("crypto: cavium - Add the Virtual Function driver for CPT") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sergey Shtylyov [Wed, 17 Dec 2025 20:21:45 +0000 (23:21 +0300)]
crypto: drbg - make drbg_get_random_bytes() return *void*
Now that drbg_get_random_bytes() always returns 0, checking its result at
the call sites stopped to make sense -- make this function return *void*
instead of *int*...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sergey Shtylyov [Wed, 17 Dec 2025 20:21:44 +0000 (23:21 +0300)]
crypto: drbg - make drbg_fips_continuous_test() return bool
Currently, drbg_fips_continuous_test() only returns 0 and -EAGAIN, so an
early return from the *do*/*while* loop in drbg_get_random_bytes() just
isn't possible. Make drbg_fips_continuous_test() return bool instead of
*int* (using true instead of 0 and false instead of -EAGAIN). This way,
we can further simplify drbg_get_random_bytes()...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sergey Shtylyov [Wed, 17 Dec 2025 20:21:43 +0000 (23:21 +0300)]
crypto: drbg - kill useless variable in drbg_fips_continuous_test()
In drbg_fips_continuous_test(), not only the initializer of the ret local
variable is useless, the variable itself does not seem needed as it only
stores the result of memcmp() until it's checked on the next line -- get
rid of the variable...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Mon, 15 Dec 2025 12:26:05 +0000 (13:26 +0100)]
crypto: octeontx2 - Use sysfs_emit in sysfs show functions
Replace sprintf() with sysfs_emit() in sso_pf_func_ovrd_show() and
kvf_limits_show(). sysfs_emit() is preferred for formatting sysfs output
as it performs proper bounds checking. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Mon, 15 Dec 2025 07:23:52 +0000 (08:23 +0100)]
crypto: iaa - Replace sprintf with sysfs_emit in sysfs show functions
Replace sprintf() with sysfs_emit() in verify_compress_show() and
sync_mode_show(). sysfs_emit() is preferred to format sysfs output as it
provides better bounds checking. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Thu, 11 Dec 2025 10:15:55 +0000 (11:15 +0100)]
crypto: algapi - Use crypto_unregister_algs in crypto_register_algs
Replace the for loop with a call to crypto_unregister_algs(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code.
In crypto_unregister_algs(), unregister the algorithms in reverse order.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Thu, 11 Dec 2025 08:52:51 +0000 (09:52 +0100)]
crypto: scompress - Use crypto_unregister_scomps in crypto_register_scomps
Replace the for loop with a call to crypto_unregister_scomps(). Return
'ret' immediately and remove the goto statement to simplify the error
handling code. No functional changes.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Harshal Dev [Thu, 11 Dec 2025 08:44:59 +0000 (14:14 +0530)]
dt-bindings: crypto: qcom,prng: document x1e80100
Document x1e80100 compatible for the True Random Number Generator.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Can Peng [Mon, 8 Dec 2025 09:50:10 +0000 (17:50 +0800)]
crypto: fips - annotate fips_enable() with __init to free init memory after boot
The fips_enable() function is only invoked early during kernel boot via the
__setup() macro ("fips=" command line parameter), and is never used again
after initialization completes.
Annotating it with __init places the function in the .init.text section,
allowing the kernel to free its memory after init (when freeing_initmem()
runs), reducing runtime memory footprint.
This is a standard practice for setup/early-parse functions and has no
functional impact — the parsing logic, return values, and fips mode
setting behavior remain unchanged.
Signed-off-by: Can Peng <pengcan@kylinos.cn> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Fri, 28 Nov 2025 13:54:12 +0000 (14:54 +0100)]
crypto: iaa - Remove unreachable pr_debug from iaa_crypto_cleanup_module
iaa_unregister_compression_device() always returns 0, making the debug
log message unreachable. Remove the log statement and convert
iaa_unregister_compression_device() to a void function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Thu, 27 Nov 2025 14:01:57 +0000 (15:01 +0100)]
crypto: iaa - Fix out-of-bounds index in find_empty_iaa_compression_mode
The local variable 'i' is initialized with -EINVAL, but the for loop
immediately overwrites it and -EINVAL is never returned.
If no empty compression mode can be found, the function would return the
out-of-bounds index IAA_COMP_MODES_MAX, which would cause an invalid
array access in add_iaa_compression_mode().
Fix both issues by returning either a valid index or -EINVAL.
Cc: stable@vger.kernel.org Fixes: b190447e0fa3 ("crypto: iaa - Add compression mode management along with fixed mode") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Thorsten Blum [Wed, 26 Nov 2025 09:46:13 +0000 (10:46 +0100)]
crypto: octeontx - Fix length check to avoid truncation in ucode_load_store
OTX_CPT_UCODE_NAME_LENGTH limits the microcode name to 64 bytes. If a
user writes a string of exactly 64 characters, the original code used
'strlen(buf) > 64' to check the length, but then strscpy() copies only
63 characters before adding a NUL terminator, silently truncating the
copied string.
Fix this off-by-one error by using 'count' directly for the length check
to ensure long names are rejected early and copied without truncation.
Cc: stable@vger.kernel.org Fixes: d9110b0b01ff ("crypto: marvell - add support for OCTEON TX CPT engine") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ahash_request` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h:251:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the corresponding
structure. Notice that `struct ahash_request` is a flexible structure,
this is a structure that contains a flexible-array member.
With these changes fix the following warning:
drivers/crypto/starfive/jh7110-cryp.h:219:49: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 20 Nov 2025 16:30:46 +0000 (16:30 +0000)]
crypto: qat - fix warning on adf_pfvf_pf_proto.c
Building the QAT driver with -Wmaybe-uninitialized triggers warnings in
qat_common/adf_pfvf_pf_proto.c. Specifically, the variables blk_type,
blk_byte, and byte_max may be used uninitialized in handle_blkmsg_req():
make M=drivers/crypto/intel/qat W=1 C=2 "KCFLAGS=-Werror" \
KBUILD_CFLAGS_KERNEL=-Wmaybe-uninitialized \
CFLAGS_MODULE=-Wmaybe-uninitialized
...
warning: ‘byte_max’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_type’ may be used uninitialized [-Wmaybe-uninitialized]
warning: ‘blk_byte’ may be used uninitialized [-Wmaybe-uninitialized]
Although the caller of handle_blkmsg_req() always provides a req.type
that is handled by the switch, the compiler cannot guarantee this.
Add a default case to the switch statement to handle an invalid req.type.
Fixes: 673184a2a58f ("crypto: qat - introduce support for PFVF block messages") Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 20 Nov 2025 16:30:19 +0000 (16:30 +0000)]
crypto: qat - add bank state save and restore for qat_420xx
Register the functions required to save and restore the state of a ring
bank on the qat_420xx device. Since this logic is shared across QAT
GEN4 devices, reuse the existing GEN4 implementation.
This functionality enables saving and restoring the state of a Virtual
Function (VF), which is required for supporting VM Live Migration.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Giovanni Cabiddu [Thu, 20 Nov 2025 16:29:23 +0000 (16:29 +0000)]
crypto: qat - fix parameter order used in ICP_QAT_FW_COMN_FLAGS_BUILD
The macro ICP_QAT_FW_COMN_FLAGS_BUILD sets flags in the firmware
descriptor to indicate:
* Whether the content descriptor is a pointer or contains embedded
data.
* Whether the source and destination buffers are scatter-gather lists
or flat buffers.
The correct parameter order is:
* First: content descriptor type
* Second: source/destination pointer type
In the asymmetric crypto code, the macro was used with the parameters
swapped. Although this does not cause functional issues, since both
macros currently evaluate to 0, it is incorrect.
Fix the parameter order in the Diffie-Hellman and RSA code paths.
Fixes: a990532023b9 ("crypto: qat - Add support for RSA algorithm") Fixes: c9839143ebbf ("crypto: qat - Add DH support") Reported-by: Qihua Dai <qihua.dai@intel.com> # off-list Reviewed-by: Ahsan Atta <ahsan.atta@intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chenghai Huang [Thu, 20 Nov 2025 13:21:24 +0000 (21:21 +0800)]
crypto: hisilicon/qm - fix incorrect judgment in qm_get_complete_eqe_num()
In qm_get_complete_eqe_num(), the function entry has already
checked whether the interrupt is valid, so the interrupt event
can be processed directly. Currently, the interrupt valid bit is
being checked again redundantly, and no interrupt processing is
performed. Therefore, the loop condition should be modified to
directly process the interrupt event, and use do while instead of
the current while loop, because the condition is always satisfied
on the first iteration.
Fixes: f5a332980a68 ("crypto: hisilicon/qm - add the save operation of eqe and aeqe") Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Herbert Xu [Wed, 17 Dec 2025 06:15:41 +0000 (14:15 +0800)]
crypto: seqiv - Do not use req->iv after crypto_aead_encrypt
As soon as crypto_aead_encrypt is called, the underlying request
may be freed by an asynchronous completion. Thus dereferencing
req->iv after it returns is invalid.
Instead of checking req->iv against info, create a new variable
unaligned_info and use it for that purpose instead.
Fixes: 0a270321dbf9 ("[CRYPTO] seqiv: Add Sequence Number IV Generator") Reported-by: Xiumei Mu <xmu@redhat.com> Reported-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds [Sun, 14 Dec 2025 03:35:35 +0000 (15:35 +1200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Linus Torvalds [Sun, 14 Dec 2025 03:24:10 +0000 (15:24 +1200)]
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Linus Torvalds [Sat, 13 Dec 2025 18:12:46 +0000 (06:12 +1200)]
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Linus Torvalds [Sat, 13 Dec 2025 18:10:35 +0000 (06:10 +1200)]
Merge tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
- Fix NULL pointer dereference crash in the Intel PMU driver
- Fix missing read event generation on task exit
- Fix AMD uncore driver init error handling
- Fix whitespace noise
* tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
perf/core: Fix missing read event generation on task exit
perf/x86/amd/uncore: Fix the return value of amd_uncore_df_event_init() on error
perf/uprobes: Remove <space><Tab> whitespace noise
Linus Torvalds [Sat, 13 Dec 2025 18:07:09 +0000 (06:07 +1200)]
Merge tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
projects / thirdparty / kernel / linux.git / log
