Casey Connolly [Tue, 18 Nov 2025 14:52:25 +0000 (15:52 +0100)]
arm64: dts: qcom: sdm845-oneplus: Don't mark ts supply boot-on
The touchscreen isn't enabled by bootloader and doesn't need to be
enabled at boot, only when the driver probes, thus remove the
regulator-boot-on property.
If the OS does not support recovering the state left by the
bootloader it needs a way to reset display hardware, so that it can
start from a clean state. Add a reference to the relevant reset.
It fixes display init issue appeared in Linux v6.17: without reset
device boots into black screen and you need to turn display off/on
to "fix" it. Also sometimes it can boot into solid blue color
with these messages in kernel log:
hw recovery is not complete for ctl:2
[drm:dpu_encoder_phys_vid_prepare_for_kickoff:569] [dpu error]enc33
intf1 ctl 2 reset failure: -22
[drm:dpu_encoder_frame_done_timeout:2727] [dpu error]enc33 frame
done timeout
Riccardo Mereu [Thu, 20 Nov 2025 15:58:25 +0000 (16:58 +0100)]
arm64: dts: qcom: qrb2210: add dts for Arduino unoq
Arduino UnoQ is a single-board computer combining Qualcomm
Dragonwing™ QRB2210 microprocessor with STMicroelectronics STM32U585
microcontroller.
Support to a simply boot to shell environment includes:
- UART, I2C, SPI
- onboard LEDS
- eMMC
- WLAN and BT
Krishna Kurapati [Fri, 28 Nov 2025 10:25:07 +0000 (15:55 +0530)]
arm64: dts: qcom: lemans-evk: Add OTG support for primary USB controller
Enable OTG support for primary USB controller on EVK Platform. Add
HD3SS3220 Type-C port controller present between Type-C port and SoC
that provides role switch notifications to controller.
Like the OnePlus 6, the Pixel 3 requires 1 kB of reserved memory on either
side of the rmtfs region to work around an XPU bug that would otherwise
cause erroneous violations when accessing the rmtfs_mem region.
Dmitry Baryshkov [Sat, 13 Dec 2025 09:28:01 +0000 (11:28 +0200)]
arm64: dts: qcom: sm8250-hdk: specify ZAP firmware name
The DT file has GPU node enabled, but doesn't specify the file name of
the ZAP firmware, which means using a default file name. Specify the
name to the ZAP shader firmware, pointing to the file in the
linux-firmware repo.
Dmitry Baryshkov [Sat, 13 Dec 2025 09:28:00 +0000 (11:28 +0200)]
arm64: dts: qcom: sm8150-hdk,mtp: specify ZAP firmware name
The DT file has GPU node enabled, but doesn't specify the file name of
the ZAP firmware, which means using a default file name. Specify the
name to the ZAP shader firmware, pointing to the file in the
linux-firmware repo.
Dmitry Baryshkov [Thu, 11 Dec 2025 01:27:45 +0000 (03:27 +0200)]
arm64: dts: qcom: sdm630: fix gpu_speed_bin size
Historically sdm630.dtsi has used 1 byte length for the gpu_speed_bin
cell, although it spans two bytes (offset 5, size 7 bits). It was being
accepted by the kernel because before the commit 7a06ef751077 ("nvmem:
core: fix bit offsets of more than one byte") the kernel didn't have
length check. After this commit nvmem core rejects QFPROM on sdm630 /
sdm660, making GPU and USB unusable on those platforms.
Set the size of the gpu_speed_bin cell to 2 bytes, fixing the parsing
error. While we are at it, update the length to 8 bits as pointed out by
Alexey Minnekhanov.
SDM845-based SHIFTPHONES SHIFT6mq has its own calibration files
for the WCN3990 WiFi/Bluetooth radio with the ath10k driver.
Add the calibration variant name to the DTS to reflect this to
allow using the calibration files from linux-firmware.
[David] Adjust the compatible as ath10k-calibration-variant is deprecated
SDM845-based Xiaomi POCOPHONE F1 has its own calibration files
for the WCN3990 WiFi/Bluetooth radio with the ath10k driver.
Add the calibration variant name to the DTS to reflect this to
allow using the calibration files from linux-firmware.
[David] Adjust the compatible as ath10k-calibration-variant is deprecated
SDM845-based Oneplus 6 and 6T have their own calibration files
for the WCN3990 WiFi/Bluetooth radio with the ath10k driver.
Add the calibration variant name to the DTS to reflect this to
allow using the calibration files from linux-firmware.
[David] Adjust the compatible as ath10k-calibration-variant is deprecated
Luca Weiss [Wed, 10 Dec 2025 01:05:28 +0000 (10:05 +0900)]
arm64: dts: qcom: sm7225-fairphone-fp4: Add camera EEPROMs
Add notes for the EEPROMs found on the main rear camera, ultra-wide rear
camera and front camera. Also add some comments that act as placeholders
for other nodes that will be added in the future, for the camera sensors
and some VCM drivers.
Document CPU Control Processor (CPUCP) mailbox controller for Qualcomm
SM8750 SoCs. It is software compatible with X1E80100 CPUCP mailbox
controller hence fallback to it.
Erikas Bitovtas [Mon, 8 Dec 2025 14:59:20 +0000 (16:59 +0200)]
arm64: dts: qcom: msm8939-asus-z00t: add battery
This device tracks remaining battery capacity percentage using voltage
mode BMS. This commit enables the pm8916_bms node and adds a battery
node to track its capacity. Battery properties were taken from the
information printed on the battery itself and downstream device tree
for a battery named "nvt+atl_3000mah" [1]
arm64: dts: qcom: x1e78100-t14s: Add audio playback over DisplayPort
Add necessary DAI links and DAI name prefixes to enable audio playback
over USB/DisplayPort and HDMI. The HDMI port is not yet enabled, but it
should carry respective DAI name prefix regardless.
arm64: dts: qcom: hamoa: Add sound DAI prefixes for DP
Sound DAI devices exposing same set of mixers, e.g. each DisplayPort
controller, need to add dedicated prefix for these mixers to avoid
conflicts and to allow ALSA to properly configure given instance.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251217120051.98198-3-krzysztof.kozlowski@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable IRIS to allow using the hardware-accelerated video codecs. The
firmware is not upstream in linux-firmware yet, so users need to copy it
from Windows to qcom/x1e80100/ASUSTeK/vivobook-s15/qcvss8380.mbn (just like
GPU/ADSP/CDSP firmware).
The Asus vivobook s15 has two usb type c ports on the left side, these
use parade ps8830 retimers like the others, enable them to also enable
dp altmode
Samsung S5K3M5 image sensor supports only 4-lane MIPI CSI-2 interface,
which makes the sensor data-lanes property redundant, and it can be
safely removed from the board dts file. Noteworthy that the property
value is incorrect, because conventionally lanes enumeration of image
sensors starts from index 1.
At first voltage supply properties of Samsung S5K3M5 image sensor got
names following a pad name convention for Omnivision image sensors. Now
the property names were corrected in the sensor dt bindings documentation,
and it should be updated in the SM8550-HDK with the Rear Camera Card
board dts file.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Link: https://lore.kernel.org/r/20251222023834.3284370-4-vladimir.zapolskiy@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
arm64: dts: qcom: sm8550-qrd: remove data-lanes property of image sensor
Samsung S5K3M5 image sensor supports only 4-lane MIPI CSI-2 interface,
which makes the sensor data-lanes property redundant, and it can be
safely removed from the board dts file. Noteworthy that the property
value is incorrect, because conventionally lanes enumeration of image
sensors starts from index 1.
At first voltage supply properties of Samsung S5K3M5 image sensor got
names following a pad name convention for Omnivision image sensors. Now
the property names were corrected in the sensor dt bindings documentation,
and it should be updated in the SM8550-QRD board dts file.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Link: https://lore.kernel.org/r/20251222023834.3284370-2-vladimir.zapolskiy@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Dale Whinham [Sat, 20 Dec 2025 15:26:32 +0000 (16:26 +0100)]
arm64: dts: qcom: Add support for X1-based Surface Pro 11
Add device trees for the Qualcomm X1E and X1P-based Microsoft Surface
Pro 11 machines (codenamed 'Denali').
This device is very similar to the Surface Laptop 7 ('Romulus').
Use a similar strategy to x1-asus-zenbook-a14.dtsi so that we can create
x1e and x1p-specific flavors of the device tree without too much code
duplication.
Hardware support is similar to other X1 machines. The most notable
missing features are:
- Touchscreen and pen
- Cameras (and status LEDs)
Signed-off-by: Dale Whinham <daleyo@gmail.com> Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251220-surface-sp11-for-next-v6-4-81f7451edb77@gmail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
dt-bindings: arm: qcom: Document Microsoft Surface Pro 11
Add the compatibles for the Qualcomm-based Microsoft Surface Pro 11,
using its Denali codename.
The LCD models are using the Qualcomm Snapdragon X1 Plus (X1P64100),
the OLED ones are using the Qualcomm Snapdragon X1 Elite (X1E80100).
Due to the difference in how the built-in panel is being handled
between the OLED variant and LCD one, it is required to have two
separate DTBs, so document the compatible string for both variants.
Krishna Kurapati [Fri, 19 Dec 2025 16:14:07 +0000 (21:44 +0530)]
arm64: dts: qcom: hamoa-iot-evk: Add vbus regulator support for Type-A ports
The Multiport controller on Hamoa EVK platform is connected to Two Type-A
ports. VBUS for each of these ports are provided by a TPS2559QWDRCTQ1
regulator, controlled from PMIC GPIOs.
Add the necessary regulators and GPIO configuration to power these.
Implement connector nodes to embed the vbus supply within them. Since
there is no entity currently that can read vbus supply from a Type-A
connector and control it, mark the supplies as always on.
arm64: dts: qcom: sm8650-hdk: Add support for the Rear Camera Card overlay
To provide access to camera sensors a Rear Camera Card can be connected
to SM8650-HDK board, the camera sensors are:
* Samsung S5K33D ToF camera sensor, connected to CSI0 over MIPI D-PHY,
* Sony IMX766 Wide camera sensor, connected to CSI1 over MIPI C-PHY,
* Omnivision OV64B Ultrawide camera sensor, connected to CSI2 over MIPI C-PHY,
* Samsung S5KJN1 Tele camera sensor, connected to CSI3 over MIPI D-PHY).
Get the initial support of Samsung S5KJN1 camera sensor and two flash leds
on the Rear Camera Card board by adding a board overlay.
arm64: dts: qcom: sm8650: Add CAMSS device tree node
Add Qualcomm SM8650 CAMSS device tree node to the platform dtsi file,
the SM8650 CAMSS IP contains
* 6 x CSIPHY,
* 3 x CSID, 2 x CSID Lite,
* 3 x IFE, 2 x IFE Lite.
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20251204041505.131891-2-vladimir.zapolskiy@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Jens Glathe [Sat, 3 Jan 2026 09:00:24 +0000 (10:00 +0100)]
arm64: dts: qcom: x1p42100-lenovo-thinkbook-16: add hdmi bridge with enable pin
Add TLMM 120 for hdmi bridge enable.
In general this is the same setup as on the T14s. Since its using simple-bridge
and also is Lenovo, we also use the same realtek,rtd2171 compatible.
The real chip identity is not known yet. The bridge is wired with un-swapped
lanes, though.
Jens Glathe [Sat, 3 Jan 2026 09:00:23 +0000 (10:00 +0100)]
arm64: dts: qcom: x1p42100-lenovo-thinkbook-16: force usb2-only mode on usb_1_ss2_dwc3
The usb_1_ss2 complex has 2 phys, usb_1_ss2_hsphy and usb_1_ss2_qmpphy. On this
laptop, they are used for different peripherals: The hsphy for the fingerprint
reader, the qmpphy to drive a hdmi bridge. The normal logical wiring for the dwc3
controller is to both phys. Delete the port@1 to the qmpphy.
Bjorn Andersson [Sat, 3 Jan 2026 14:41:23 +0000 (08:41 -0600)]
Merge branch '20260103-ufs_symbol_clk-v2-1-51828cc76236@oss.qualcomm.com' into arm64-for-6.20
Merge the addition of UFS PHY clocks to the Hamoa GCC binding through a
topic branch, to avoid DeviceTree validation warnings, and later allow
referencing the added clock constants.
Jingyi Wang [Mon, 15 Dec 2025 09:07:23 +0000 (01:07 -0800)]
arm64: dts: qcom: Introduce Kaanapali SoC
Kaanapali is Snapdragon SoC from Qualcomm.
Features added in this patch:
- CPUs with PSCI idle states and cpufreq
- Interrupt-controller with PDC wakeup support
- Timers, TCSR Clock Controllers
- Reserved Shared memory
- GCC and RPMHCC
- TLMM
- Interconnect with CPU BWMONs
- QuP with UART
- SMMU
- RPMhPD
- UFS with Inline Crypto Engine
- LLCC
- Watchdog
- SD Card
- PCIe
Written with help from Raviteja Laggyshetty (added interconnect nodes),
Taniya Das (added Clock Controllers and cpufreq), Jishnu Prakash
(added RPMhPD), Nitin Rawat (added UFS), Gaurav Kashyap (added ICE),
Manish Pandey (added SD Card) and Qiang Yu (added PCIe).
Co-developed-by: Tengfei Fan <tengfei.fan@oss.qualcomm.com> Signed-off-by: Tengfei Fan <tengfei.fan@oss.qualcomm.com> Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251215-knp-dts-v4-3-1541bebeb89f@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On earlier platforms, Inter Process Communication Controller (IPCC) used
virtual client IDs and performed virtual-to-physical mapping in hardware,
so the IDs defined in dt-bindings/mailbox/qcom-ipcc.h are common across
platforms. Physical client IDs instead of virtual client IDs are used for
qcom new platforms like Kaanapali, which will be parsed by the devicetree
and passed to hardware to use Physical client IDs directly. Since physical
client IDs could vary across platforms, add a corresponding header file
for the Kaanapali platform.
Linus Torvalds [Sun, 14 Dec 2025 03:35:35 +0000 (15:35 +1200)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The only core fix is in doc; all the others are in drivers, with the
biggest impacts in libsas being the rollback on error handling and in
ufs coming from a couple of error handling fixes, one causing a crash
if it's activated before scanning and the other fixing W-LUN
resumption"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: qcom: Fix confusing cleanup.h syntax
scsi: libsas: Add rollback handling when an error occurs
scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()
scsi: ufs: core: Fix a deadlock in the frequency scaling code
scsi: ufs: core: Fix an error handler crash
scsi: Revert "scsi: libsas: Fix exp-attached device scan after probe failure scanned in again after probe failed"
scsi: ufs: core: Fix RPMB link error by reversing Kconfig dependencies
scsi: qla4xxx: Use time conversion macros
scsi: qla2xxx: Enable/disable IRQD_NO_BALANCING during reset
scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset
scsi: imm: Fix use-after-free bug caused by unfinished delayed work
scsi: target: sbp: Remove KMSG_COMPONENT macro
scsi: core: Correct documentation for scsi_device_quiesce()
scsi: mpi3mr: Prevent duplicate SAS/SATA device entries in channel 1
scsi: target: Reset t_task_cdb pointer in error case
scsi: ufs: core: Fix EH failure after W-LUN resume error
Linus Torvalds [Sun, 14 Dec 2025 03:24:10 +0000 (15:24 +1200)]
Merge tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"We have a patch that adds an initial set of tracepoints to the MDS
client from Max, a fix that hardens osdmap parsing code from myself
(marked for stable) and a few assorted fixups"
* tag 'ceph-for-6.19-rc1' of https://github.com/ceph/ceph-client:
rbd: stop selecting CRC32, CRYPTO, and CRYPTO_AES
ceph: stop selecting CRC32, CRYPTO, and CRYPTO_AES
libceph: make decode_pool() more resilient against corrupted osdmaps
libceph: Amend checking to fix `make W=1` build breakage
ceph: Amend checking to fix `make W=1` build breakage
ceph: add trace points to the MDS client
libceph: fix log output race condition in OSD client
Linus Torvalds [Sat, 13 Dec 2025 18:12:46 +0000 (06:12 +1200)]
Merge tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug fix from Ingo Molnar:
- Fix CPU hotplug callbacks to disable interrupts on UP kernels
* tag 'smp-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Make atomic hotplug callbacks run with interrupts disabled on UP
Linus Torvalds [Sat, 13 Dec 2025 18:10:35 +0000 (06:10 +1200)]
Merge tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
- Fix NULL pointer dereference crash in the Intel PMU driver
- Fix missing read event generation on task exit
- Fix AMD uncore driver init error handling
- Fix whitespace noise
* tag 'perf-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix NULL event dereference crash in handle_pmi_common()
perf/core: Fix missing read event generation on task exit
perf/x86/amd/uncore: Fix the return value of amd_uncore_df_event_init() on error
perf/uprobes: Remove <space><Tab> whitespace noise
projects / thirdparty / kernel / linux.git / log
