Alec L Davis [Mon, 10 Jun 2013 07:32:51 +0000 (07:32 +0000)]
IAX2: fix race condition with nativebridge transfers.
1). When touching the bridgecallno, we need to lock it.
2). stop_stuff() which calls iax2_destroy_helper()
Assumes the lock on the pvt is already held, when iax2_destroy_helper() is called.
Thus we need to lock the bridgecallno pvt before we call stop_stuff(iaxs[fr->callno]->bridgecallno);
3). When evaluating the state of 'callno->transferring' of the current leg,
we can't change it to READY unless the bridgecallno is locked.
Why, if we are interrupted by the other call leg before 'transferring = TRANSFER_RELEASED',
the interrupt will find that it is READY and that the bridgecallno is also READY so Releases the legs.
Richard Mudgett [Wed, 29 May 2013 20:18:01 +0000 (20:18 +0000)]
Fix segfault when dealing with chan_agent channels.
Check the returned bridged pointer for NULL to avoid a crash. It looks
like chan_agent is returning a NULL pointer when it probably should be
returning a pointer to the channel the Agent channel is pretending to be.
(closes issue ASTERISK-21793)
Reported by: Rodrigo P. Telles
Patches:
jira_asterisk_21793_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Rodrigo P. Telles
........
Merged revisions 390044 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Jonathan Rose [Tue, 28 May 2013 17:43:23 +0000 (17:43 +0000)]
Fix a memory copying bug in slinfactory which was causing mixmonitor issues.
Reported by: Michael Walton
Tested by: Jonathan Rose
Patches:
slinfactory.c.ASTERISK-21799.patch uploaded by Michael Walton (license 6502)
(closes issue ASTERISK-21799)
........
Merged revisions 389895 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Fri, 24 May 2013 11:49:08 +0000 (11:49 +0000)]
Print all logger messages on shutdown
When Asterisk shuts down and shuts down the loggin gsubsystem, any
messages currently in flight will not get logged. This patch prevents the
loop writing messages from breaking out prematurely, such that all of the
messages are logged.
Kevin Harwell [Wed, 15 May 2013 15:57:25 +0000 (15:57 +0000)]
Fix for segfault in __ast_rwlock_destroy with DEBUG_THREADS
If DEBUG_THREADS is enabled __ast_rwlock_destroy causes a segfault while trying
to access a possible NULL t->track object. A NULL check has been added before
trying to access the memory.
Jason Parker [Wed, 15 May 2013 14:25:35 +0000 (14:25 +0000)]
Fix VM snapshot handling for combined INBOX.
The snapshot API contains an option that allow for combining of new
and old messages within a single snapshot. New messages, however,
include options beyond just 'INBOX' - it also includes the Urgent
folder. A previous patch that combined INBOX and Urgent accidentally
impacted snapshots that attempted to gain messages from just the Old
folder. This patch fixes the snapshot gathering such that the API
returns the appropriate messages for the folder selected, with and
without the combine option.
This should make it more clear about what's happening.
Michael L. Young [Mon, 13 May 2013 21:17:44 +0000 (21:17 +0000)]
Fix Missing CALL-ID When Logging Through Syslog
The CALL-ID (ie [C-00000074]) is missing when logging to syslog. This was just
an oversight when this feature was added.
* Add CALL-IDs when using syslog
(closes issue ASTERISK-21430)
Reported by: Nikola Ciprich
Tested by: Nikola Ciprich, Michael L. Young
Patches:
asterisk-21430-syslog-callid_trunk.diff by Michael L. Young (license 5026)
Michael L. Young [Mon, 13 May 2013 21:05:38 +0000 (21:05 +0000)]
Fix Crash Caused By One-way Audio With auto_* NAT Settings Fix
The prior code committed, r385473, failed to take into consideration that not
all outgoing calls will be to a peer. My fault.
This patch does the following:
* Check if there is a related peer involved. If there is, check and set NAT
settings according to the peer's settings.
* Fix a problem with realtime peers. If the global setting has auto_force_rport
set and we issued a "sip reload" while a peer is still registered, the peer's
flags for NAT are reset to off. When this happens, we were always setting the
contact address of the peer to that of the full contact info that we had.
(closes issue ASTERISK-21374)
Reported by: jmls
Tested by: Michael L. Young
Patches:
asterisk-21374-fix-crash-and-rt-peers.diff by Michael L. Young (license 5026)
Richard Mudgett [Fri, 10 May 2013 22:11:12 +0000 (22:11 +0000)]
Allow mISDN to send PROGRESS messsage.
* Made isdn_msg_parser.c build a progress message with the mandatory
progress indicator IE. (The mISDNuser NT state machine rejected sending
the incomplete message.)
Note: The associated mISDN and mISDNuser patches respectively are viewable
here:
http://svnview.digium.com/svn/thirdparty?view=rev&rev=200
http://svnview.digium.com/svn/thirdparty?view=rev&rev=201
Fix The Payload Being Set On CN Packets And Do Not Set Marker Bit
When we send out a CN packet (for instance, in the case of using rtpkeepalives),
we are not setting the payload code properly. Also, we are setting the marker
bit when we shouldn't be according to RFC 3389, section 4.
AST_RTP_CN is not defined by AST_FORMAT codes. Therefore, we should be using
ast_rtp_codecs_payload_code() rather than ast_rtp_codecs_payload_lookup().
11 and trunk already use the appropriate function.
* In 1.8, use ast_rtp_codecs_payload_code()
* Remove the setting of the marker bit
* Fix the debug message by incrementing the seqno after the debug message is set
in order to display the correct seqno that was sent out
(closes issue ASTERISK-21246)
Reported by: Peter Katzmann
Tested by: Peter Katzmann, Michael L. Young
Patches:
asterisk-21246-rtp-cng-payload-error_1.8_v2.diff
uploaded by Michael L. Young (license 5026)
Fix Segfault In app_queue When "persistentmembers" Is Enabled And Using Realtime
When the "ignorebusy" setting was deprecated, we added some code to allow us to
be compatible with older setups that are still using the "ignorebusy" setting
instead of "ringinuse". We set a char *variable with the column name to use,
which helps the realtime functions to use the correct column in their SQL
queries. When "persistentmembers" is enabled, we are not setting this variable
before the realtime functions were called to load members. This results in the
variable being NULL and therefore causing a segfault when loading members during
the module's process of loading.
The solution was to move the code that sets that variable to be before these
realtime functions are called during the loading of the module.
(closes issue ASTERISK-21738)
Reported by: JoshE
Tested by: JoshE
Patches:
asterisk-21738-rt-ringinuse-field-not-set.diff
uploaded by Michael L. Young (license 5026)
Alec L Davis [Wed, 8 May 2013 07:19:11 +0000 (07:19 +0000)]
chan_sip: NOTIFYs for BLF start queuing up and fail to be sent out after retries fail
RFC6665 4.2.2: ... after a failed State NOTIFY transaction remove the subscription
The problem is that the State Notify requests rely on the 200OK reponse for pacing control
and to not confuse the notify susbsystem.
The issue is, the pendinginvite isn't cleared if a response isn't received,
thus further notify's are never sent.
The solution, follow RFC 6665 4.2.2's 'SHOULD' and remove the subscription after failure.
(closes issue ASTERISK-21677)
Reported by: Dan Martens
Tested by: Dan Martens, David Brillert, alecdavis
alecdavis (license 585)
Russell Bryant [Mon, 6 May 2013 15:55:27 +0000 (15:55 +0000)]
Make SLA reload more paranoid.
Reload support was originally not included for SLA. It was added later,
but in a fairly non-traditional way. It basically sets a flag
indicating that a reload is pending, and then waits for a time where it
thinks everything SLA related is idle and unused, and *then* executes
the reload. It does this because the reload process is destructive. It
starts by throwing everything away and starting over.
There are a number of problems with this approach. One of them is that
the check to see if anything in use was incomplete. This patch makes it
more complete and thus less likely for a crash to occur during reload
processing. However, this approach still has problems so some much more
significant reworking of this code will need to come in as a next step.
Patch credit and testing by CoreDial, LLC.
........
Merged revisions 387688 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Thu, 2 May 2013 17:15:04 +0000 (17:15 +0000)]
Update utils Makefile to handle r387294
Alec's patch that added the Asterisk version to 'core show locks' angered the
items in utils, as they exist somewhat outside of the Asterisk build system.
Some day, this Makefile should get nuked from high orbit, but for now, include
version.c in its list of stuff to pile in.
........
Merged revisions 387421 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Alec L Davis [Thu, 2 May 2013 08:09:59 +0000 (08:09 +0000)]
chan_sip: Session-Expires: Set timer to correctly expire at (~2/3) of the interval when not the refresher
RFC 4028 Section 10
if the side not performing refreshes does not receive a
session refresh request before the session expiration, it SHOULD send
a BYE to terminate the session, slightly before the session
expiration. The minimum of 32 seconds and one third of the session
interval is RECOMMENDED.
Prior to this asterisk would refresh at 1/2 the Session-Expires interval,
or if the remote device was the refresher, asterisk would timeout at interval end.
Now, when not refresher, timeout as per RFC noted above.
Alec L Davis [Thu, 2 May 2013 07:22:59 +0000 (07:22 +0000)]
chan_sip: Honor Session-Expires in 200OK response when it's a RE-INVITE when asterisk is the refresher.
RFC 4028 Section 7.2
"UACs MUST be prepared to receive a Session-Expires header field in a
response, even if none were present in the request."
What changed
After ASTERISK-20787, inbound calls to asterisk with no Session-Expires in the INVITE are now are offered
a Session-Expires (1800 asterisk default) in the response, with asterisk as the refresher.
Symptom:
After 900 seconds (asterisk default refresher period 1800), asterisk RE-INVITEs the device, the device
may respond with a much lower Session-Expires (180 in our case) value that it is now using.
Asterisk ignores this response, as it's deemed both an INBOUND CALL, and a RE-INVITE.
After 180 seconds the device times out and sends BYE (hangs up), asterisk is still working with the
refresher period of 1800 as it ignored the 'Session Expires: 180' in the previous 200OK response.
Fix:
handle_response_invite() when 200OK, remove check for outbound and reinvite.
Matthew Jordan [Wed, 1 May 2013 21:17:38 +0000 (21:17 +0000)]
Clear the DTMF sending digit tracking on off nominal paths
In certain situations, when the RTP engine goes to send a DTMF end digit
it may be in a situation where the remote address is no longer available,
or the digit that was supposed to be sent is invalid. In such cases, we
need to clear the RTP counters appropriately. Otherwise, when the RTP
source is set again, we'll continue to think that we're in the middle of
sending a DTMF digit, which can confuse the remote party (signficantly).
Matthew Jordan [Wed, 1 May 2013 18:35:46 +0000 (18:35 +0000)]
Prevent crash in 'sip show peers' when the number of peers on a system is large
When you have lots of SIP peers (according to the issue reporter, around 3500),
the 'sip show peers' CLI command or AMI action can crash due to a poorly placed
string duplication that occurs on the stack. This patch refactors the command
to not allocate the string on the stack, and handles the formatting of a single
peer in a separate function call.
Matthew Jordan [Tue, 30 Apr 2013 22:46:16 +0000 (22:46 +0000)]
Fix CDR not being created during an externally initiated blind transfer
Way back when in the dark days of Asterisk 1.8.9, blind transferring a call
in a context that included the 'h' extension would inadvertently execute the
hangup code logic on the transferred channel. This was a "bad thing". The fix
was to properly check for the softhangup flags on the channel and only execute
the 'h' extension logic (and, in later versions, hangup handler logic) if the
channel was well and truly dead (Jim).
Unfortunately, CDRs are fickle. Setting the softhangup flag when we detected
that the channel was leaving the bridge (but not to die) caused some crucial
snippet of CDR code, lying in ambush in the middle of the bridging code, to
not get executed. This had the effect of blowing away one of the CDRs that is
typically created during a blind transfer.
While we live and die by the adage "don't touch CDRs in release branches", this
was our bad. The attached patch restores the CDR behavior, and still manages to
not run the 'h' extension during a blind transfer (at least not when it's
supposed to).
Thanks to Steve Davies for diagnosing this and providing a fix.
Review: https://reviewboard.asterisk.org/r/2476
(closes issue ASTERISK-21394)
Reported by: Ishfaq Malik
Tested by: Ishfaq Malik, mjordan
patches:
fix_missing_blindXfer_cdr2 uploaded by one47 (License 5012)
........
Merged revisions 387036 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Fri, 26 Apr 2013 21:27:32 +0000 (21:27 +0000)]
Clean up memory leak in config file on off nominal paths when glob is allowed
If a system allows for its usage, Asterisk will use glob to help parse
Asterisk .conf files. The config file loading routine was leaking the memory
allocated by the glob() routine when the config file was in an unmodified
or invalid state.
This patch properly calls globfree in those off nominal paths.
Matthew Jordan [Fri, 26 Apr 2013 21:13:36 +0000 (21:13 +0000)]
Clean up resources in features on exit
This patch cleans up two things features:
* It properly unregisters the CLI commands that features registered
* It cancels and performs a pthread_join on the created parking thread. This
not only properly joins a non-detached thread, but also prevents disposing
of the parking lots prior to the parking thread completely exiting.
Richard Mudgett [Mon, 22 Apr 2013 16:30:53 +0000 (16:30 +0000)]
Fix crash when AMI redirect action redirects two channels out of a bridge.
The two party bridging loops were changing the bridge peer pointers
without the channel locks held. Thus when ast_channel_massquerade()
tested and used the pointer there is a small window of opportunity for the
pointers to become NULL even though the masquerade code has the channels
locked.
(closes issue ASTERISK-21356)
Reported by: William luke
Patches:
jira_asterisk_21356_v11.patch (license #5621) patch uploaded by rmudgett
Tested by: William luke
........
Merged revisions 386256 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Fri, 19 Apr 2013 22:25:49 +0000 (22:25 +0000)]
Prevent res_timing_pthread from blocking callers
There were several reports of deadlock when using
res_timing_pthread. Backtraces indicated that one thread was blocked
waiting for the write to the pipe to complete and this thread held
the container lock for the timers. Therefore any thread that wanted
to create a new timer or read an existing timer would block waiting
for either the timer lock or the container lock and deadlock ensued.
This patch changes the way the pipe is used to eliminate this source
of deadlocks:
1) The pipe is placed in non-blocking mode so that it would never
block even if the following changes someone fail...
2) Instead of writing bytes into the pipe for each "tick" that's
fired the pipe now has two states--signaled and unsignaled. If
signaled, the pipe is hot and any pollers of the read side
filedescriptor will be woken up. If unsigned the pipe is idle. This
eliminates even the chance of filling up the pipe and reduces the
potential overhead of calling unnecessary writes.
3) Since we're tracking the signaled / unsignaled state, we can
eliminate the exta poll system call for every firing because we know
that there is data to be read.
(closes issue ASTERISK-21389)
Reported by: Matt Jordan
Tested by: Shaun Ruffell, Matt Jordan, Tony Lewis
patches:
0001-res_timing_pthread-Reduce-probability-of-deadlocking.patch uploaded by sruffell (License 5417)
(closes issue ASTERISK-19754)
Reported by: Nikola Ciprich
(closes issue ASTERISK-20577)
Reported by: Kien Kennedy
(closes issue ASTERISK-17436)
Reported by: Henry Fernandes
David M. Lee [Thu, 18 Apr 2013 16:07:03 +0000 (16:07 +0000)]
Fix lock errors on startup.
In messages.c, there are several places in the code where we create a
tmp_tech_holder and pass that into an ao2_find call. Unfortunately, we
weren't initializing the rwlock on the tmp_tech_holder, which the hash
function was locking. It's apparently harmless, but still not the best
code.
This patch extracts all that copy/pasted code into two functions,
msg_find_by_tech and msg_find_by_tech_name, which properly initialize
and destroy the rwlock on the tmp_tech_holder.
Alec L Davis [Tue, 16 Apr 2013 23:27:51 +0000 (23:27 +0000)]
Distributed Device State broken at sites using res_xmpp or res_jabber where Secuity Advisory AST-2012-015 is inplace
res_xmpp was not adding AST_EVENT_IE_CACHABLE to the event as each message came in,
then devstate_change_collector_cb() was unable to find AST_EVENT_IE_CACHABLE in the event,
so defaulted incorrectly to AST_DEVSTATE_NOT_CACHABLE.
Alec L Davis [Tue, 16 Apr 2013 23:13:58 +0000 (23:13 +0000)]
Distributed Device State broken at sites using res_xmpp or res_jabber where Secuity Advisory AST-2012-015 is inplace
res_jabber/res_xmpp were not adding AST_EVENT_IE_CACHABLE to the event as each message came in,
then devstate_change_collector_cb() was unable to find AST_EVENT_IE_CACHABLE in the event,
so defaulted incorrectly to AST_DEVSTATE_NOT_CACHABLE.
David M. Lee [Mon, 15 Apr 2013 15:18:54 +0000 (15:18 +0000)]
Fix the svn:keywords property on several files.
Normally I think keyword expansion is silly, but the one time it would have
been good, it didn't work because the property had quotes in it. This patch
fixes obviously busted svn:keywords properties.
........
Merged revisions 385683 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Sun, 14 Apr 2013 03:00:27 +0000 (03:00 +0000)]
Calculate the timestamp for outbound RTP if we don't have timing information
This patch calculates the timestamp for outbound RTP when we don't have timing
information. This uses the same approach in res_rtp_asterisk. Thanks to both
Pietro and Tzafrir for providing patches.
(closes issue ASTERISK-19883)
Reported by: Giacomo Trovato
Tested by: Pietro Bertera, Tzafrir Cohen
patches:
rtp-timestamp-1.8.patch uploaded by tzafrir (License 5035)
rtp-timestamp.patch uploaded by pbertera (License 5943)
........
Merged revisions 385636 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Sun, 14 Apr 2013 02:30:19 +0000 (02:30 +0000)]
Don't attempt to create a voice frame on a read error
Prior to this patch, a read error in snd_pcm_readi would still be treated as a
nominal result when constructing a voice frame from the expected data. Since
the value returned is negative, as opposed to the number of samples read,
this could result in a crash. With this patch, we now return a null frame
when a read error is detected.
Note that the patch on ASTERISK-21329 was modified slightly for this commit,
in that we bail immediately on detecting the read error, rather than bypassing
the construction of the voice frame.
Michael L. Young [Fri, 12 Apr 2013 22:37:46 +0000 (22:37 +0000)]
Fix Manager Segfault When app_queue Is Unloaded
When app_queue is unloaded, some manager commands are not being unregistered
which result in a segfault. This patch corrects this.
(closes issue ASTERISK-21397)
Reported by: Peter Katzmann, Corey Farrell
Tested by: Corey Farrell
Patches:
asterisk-21397-missing-unreg-manager-cmd_1.8.diff
Michael L. Young (license 5026)
asterisk-21397-missing-unreg-manager-cmd_11.diff
Michael L. Young (license 5026)
Michael L. Young [Fri, 12 Apr 2013 22:18:42 +0000 (22:18 +0000)]
Fix app_voicemail Segfault And A Few Memory Leaks
The original report was that app_voicemail would crash. This was caused by
ast_config_load() returning CONFIG_STATUS_FILEINVALID but no checks being
performed for that return status. After adding the initial patch to fix this
issue, Jaco Kroon (jkroon) added some fixes to memory leaks he had discovered.
During review, Walter Doekes (wdoekes) suggested adding a helper function in
order to determine if we had a valid configuration or not.
This patch does the following:
* Creates a helper function to check if the configuration is valid
* Adds calls to the new helper function where appropiate
* Fixes memory leaks where the code returned without running
ast_config_destroy() on the configuration that was loaded
(closes issue ASTERISK-21302)
Reported by: Jaco Kroon
Tested by: Jaco Kroon, Michael L. Young
Patches:
asterisk-11.3.0-app_voicemail-ast_config-fixes.patch
Jaco Kroon (license 5671)
asterisk-21302-valid_cfg_and_mem_leaks_v3-1.8.diff
Michael L. Young (license 5026)
Michael L. Young [Fri, 12 Apr 2013 15:01:39 +0000 (15:01 +0000)]
Fix One-Way Audio With auto_* NAT Settings When SIP Calls Initiated By PBX
When we reload Asterisk or chan_sip, the flags force_rport and comedia that are
turned on and off when using the auto_force_rport and auto_comedia nat settings
go back to the default setting off. These flags are turned on when needed or
off when not needed at the time that a peer registers, re-registers or initiates
a call. This would apply even when only the default global setting
"nat=auto_force_rport" is being used, which in this case would only affect the
force_rport flag.
Everything is good except for the following: The nat setting is set to
auto_force_rport and auto_comedia. We reload Asterisk and the peer's
registration has not expired. We load in the settings for the peer which turns
force_rport and comedia back to off. Since the peer has not re-registered or
placed a call yet, those flags remain off. We then initiate a call to the peer
from the PBX. The force_rport and comedia flags stay off. If NAT is involved,
we end up with one-way audio since we never checked to see if the peer is behind
NAT or not.
This patch does the following:
* Moves the checking of whether a peer is behind NAT into its own function
* Create a function to set the peer's NAT flags if they are using the auto_* NAT
settings
* Adds calls in sip_request_call() to these new functions in order to setup the
dialog according to the peer's settings
(closes issue ASTERISK-21374)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
asterisk-21374-auto-nat-outgoing-fix_v2.diff Michael L. Young (license 5026)
Alec L Davis [Fri, 12 Apr 2013 08:16:15 +0000 (08:16 +0000)]
IAX2, prevent network thread starting before all helper threads are ready
On startup, it's possible for a frame to arrive before the processing threads were ready.
In iax2_process_thread() the first pass through falls into ast_cond_wait, should a frame arrive
before we are at ast_cond_wait, the signal will be ignored.
The result iax2_process_thread stays at ast_cond_wait forever, with deferred frames being queued.
Fix: When creating initial idle iax2_process_threads, wait for init_cond to be signalled
after each thread is started.
Matthew Jordan [Wed, 10 Apr 2013 14:25:44 +0000 (14:25 +0000)]
Use LDAP memory management functions instead of Asterisk's
When MALLOC_DEBUG is enabled with res_config_ldap, issues (munmap_chunk:
invalid pointer errors) can occur as the memory is being allocated with
Asterisk's wrappers around malloc/calloc/free/strdup, as opposed to the
LDAP library's wrappers.
This patch uses the LDAP library's wrappers where appropriate, so that
compiling with MALLOC_DEBUG doesn't cause more problems than it solves.
Note that the patch listed below was modified slightly for this commit
to account for some additional memory allocation/deallocations.
(closes issue ASTERISK-17386)
Reported by: John Covert
Tested by: Andrew Latham
patches:
issue18789-1.8-r316873.patch uploaded by seanbright (License 5060)
........
Merged revisions 385190 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Wed, 10 Apr 2013 14:05:07 +0000 (14:05 +0000)]
Fix crash in chan_sip when a core initiated op occurs at the same time as a BYE
When a BYE request is processed in chan_sip, the current SIP dialog is detached
from its associated Asterisk channel structure. The tech_pvt pointer in the
channel object is set to NULL, and the dialog persists for an RFC mandated
period of time to handle re-transmits.
While this process occurs, the channel is locked (which is good).
Unfortunately, operations that are initiated externally have no way of knowing
that the channel they've just obtained (which is still valid) and that they are
attempting to lock is about to have its tech_pvt pointer removed. By the time
they obtain the channel lock and call the channel technology callback, the
tech_pvt is NULL.
This patch adds a few checks to some channel callbacks that make sure the
tech_pvt isn't NULL before using it. Prime offenders were the DTMF digit
callbacks, which would crash if AMI initiated a DTMF on the channel at the
same time as a BYE was received from the UA. This patch also adds checks on
sip_transfer (as AMI can also cause a callback into this function), as well
as sip_indicate (as lots of things can queue an indication onto a channel).
Review: https://reviewboard.asterisk.org/r/2434/
(closes issue ASTERISK-20225)
Reported by: Jeff Hoppe
........
Merged revisions 385170 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Rusty Newton [Mon, 8 Apr 2013 23:36:32 +0000 (23:36 +0000)]
Modified the list of keys for the driver backends for sake of sample clarity
Added a line showing the mapping of "mysql" to res_config_mysql available in add-ons. We used "mysql" as an example driver key in the sample, but didn't show what module it mapped too. Also added a subtitle above the list of keys for driver backends.
........
Merged revisions 385047 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Fix For Not Overriding The Default Settings In chan_sip
The initial report was that the "nat" setting in the [general] section was not
having any effect in overriding the default setting. Upon confirming that this
was happening and looking into what was causing this, it was discovered that
other default settings would not be overriden as well.
This patch works similar to what occurs in build_peer(). We create a temporary
ast_flags structure and using a mask, we override the default settings with
whatever is set in the [general] section.
In the bug report, the reporter who helped to test this patch noted that the
directmedia settings were being overriden properly as well as the nat settings.
(closes issue ASTERISK-21225)
Reported by: Alexandre Vezina
Tested by: Alexandre Vezina, Michael L. Young
Patches:
asterisk-21225-handle-options-default-prob_1.8_v4.diff.diff
Michael L. Young (license 5026)
Fix For Not Overriding The Default Settings In chan_sip
The initial report was that the "nat" setting in the [general] section was not
having any effect in overriding the default setting. Upon confirming that this
was happening and looking into what was causing this, it was discovered that
other default settings would not be overriden as well.
This patch works similar to what occurs in build_peer(). We create a temporary
ast_flags structure and using a mask, we override the default settings with
whatever is set in the [general] section.
In the bug report, the reporter who helped to test this patch noted that the
directmedia settings were being overriden properly as well as the nat settings.
This issue is also present in Asterisk 1.8 and a separate patch will be applied
to it.
(issue ASTERISK-21225)
Reported by: Alexandre Vezina
Tested by: Alexandre Vezina, Michael L. Young
Patches:
asterisk-21225-handle-options-default-prob_v4.diff
Michael L. Young (license 5026)
In ASTERISK-20904, the focus was around the changes to NAT that took place in
Asterisk 11. Since the report stated that 1.8 was fine, we didn't take a look
at 1.8 at the time.
While working on ASTERISK-21225, I could see that 1.8 would benefit from having
some of those changes applied to it.
This patch does the following:
* The important part of this patch is that it sets the peer's flags earlier in
build_peer so that the code properly uses the peer's flags based on the peer's
configuration.
* constify req parameter in check_via()
* update realtime schemas under the contrib directory to handle properly the NAT
settings available in 1.8 as well as to handle the changes made in 11 to make
upgrading easier when installing newer versions of Asterisk
(closes issue ASTERISK-21243)
Reported by: Michael L. Young
Patches:
asterisk-20904-changes_for_1.8.diff Michael L. Young (license 5026)
The new inband_on_proceeding option causes Asterisk to assume inband audio
may be present when a PROCEEDING message is received.
Q.931 Section 5.1.2 says the network cannot assume that the CPE side has
attached to the B channel at this time without explicitly sending the
progress indicator ie informing the CPE side to attach to the B channel
for audio. However, some non-compliant ISDN switches send a PROCEEDING
without the progress indicator ie indicating inband audio is available and
assume that the CPE device has connected the media path for listening to
ringback and other messages.
ASTERISK-17834 which causes this issue was dealing with a non-compliant
network switch.
David M. Lee [Tue, 2 Apr 2013 17:34:50 +0000 (17:34 +0000)]
Fixed spurious rebuilds of func_version.
func_version.so was being rebuilt every time, because build.h was
changing every build, because of the cleantest dependency that was
added in r384410 to fix parallel make bugs.
Now build.h will only be created if it does not exist, which was the
original behavior of the Makefile.
........
Merged revisions 384544 from http://svn.asterisk.org/svn/asterisk/branches/1.8
David M. Lee [Mon, 1 Apr 2013 13:28:02 +0000 (13:28 +0000)]
Fix parallel make problems.
Occasionally, make -j would fail due to missing includes, or other
unusual errors.
This was due to the 'cleantest' target, which was designed to force a
make clean when some change in the code would cause the typical
depedency checking to fail. Several targets in the main Makefile did
not depend upon cleantest, hence would run in parallel to it. By
adding the dependency, make -j runs happily now.
Jonathan Rose [Fri, 29 Mar 2013 16:31:45 +0000 (16:31 +0000)]
app_voicemail: Add blank argument to externnotify if no context argument
At least one call to run_externnotify provides a NULL context parameter and
because the snprintf statement doesn't account for a NULL context parameter,
it simply writes '(null)' to the arguments string instead. This patch makes
it write two quotes back to back for that argument instead in the event of
a NULL context.
(closes issue ASTERISK-18207)
Reported by: Barry L. Kline
Patches:
modified from patch-20130306 uploaded by Karsten Wemheuer (License 5930)
........
Merged revisions 384325 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Wed, 27 Mar 2013 18:51:11 +0000 (18:51 +0000)]
Fix a file descriptor leak in off nominal path
While looking at the security vulnerability in ASTERISK-20967, Walter noticed
a file descriptor leak and some other issues in off nominal code paths. This
patch corrects them.
Note that this patch is not related to the vulnerability in ASTERISK-20967,
but the patch was placed on that issue.
Kinsey Moore [Wed, 27 Mar 2013 17:06:07 +0000 (17:06 +0000)]
Fix white noise on SRTP decryption
When res_rtp_asterisk.c was altered to avoid attempting to apply
unprotect algorithms to non-audio RTP packets, the test used was
incorrect. This caused the audio packets to not be decrypted and
resulted in loud white noise on the other endpoint (or both endpoints
depending on the call legs involved). The test now properly checks the
version field in the RTP header to ensure that RTP and RTCP are
decrypted while other types of packets are not.
(closes issue ASTERISK-21323)
Reported by: andrea
Tested by: Kinsey Moore, andrea, John Bigelow
Patches:
whitenoise_fix.diff uploaded by Kinsey Moore
........
Merged revisions 384048 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Wed, 27 Mar 2013 15:23:08 +0000 (15:23 +0000)]
AST-2013-003: Prevent username disclosure in SIP channel driver
When authenticating a SIP request with alwaysauthreject enabled, allowguest
disabled, and autocreatepeer disabled, Asterisk discloses whether a user
exists for INVITE, SUBSCRIBE, and REGISTER transactions in multiple ways. The
information is disclosed when:
* A "407 Proxy Authentication Required" response is sent instead of a
"401 Unauthorized" response
* The presence or absence of additional tags occurs at the end of "403
Forbidden" (such as "(Bad Auth)")
* A "401 Unauthorized" response is sent instead of "403 Forbidden" response
after a retransmission
* Retransmission are sent when a matching peer did not exist, but not when a
matching peer did exist.
This patch resolves these various vectors by ensuring that the responses sent
in all scenarios is the same, regardless of the presence of a matching peer.
This issue was reported by Walter Doekes, OSSO B.V. A substantial portion of
the testing and the solution to this problem was done by Walter as well - a
huge thanks to his tireless efforts in finding all the ways in which this
setting didn't work, providing automated tests, and working with Kinsey on
getting this fixed.
Matthew Jordan [Wed, 27 Mar 2013 14:38:02 +0000 (14:38 +0000)]
AST-2013-002: Prevent denial of service in HTTP server
AST-2012-014, fixed in January of this year, contained a fix for Asterisk's
HTTP server for a remotely-triggered crash. While the fix put in place fixed
the possibility for the crash to be triggered, a denial of service vector still
exists with that solution if an attacker sends one or more HTTP POST requests
with very large Content-Length values. This patch resolves this by capping
the Content-Length at 1024 bytes. Any attempt to send an HTTP POST with
Content-Length greater than this cap will not result in any memory allocation.
The POST will be responded to with an HTTP 413 "Request Entity Too Large"
response.
This issue was reported by Christoph Hebeisen of TELUS Security Labs
(closes issue ASTERISK-20967)
Reported by: Christoph Hebeisen
patches:
AST-2013-002-1.8.diff uploaded by mmichelson (License 5049)
AST-2013-002-10.diff uploaded by mmichelson (License 5049)
AST-2013-002-11.diff uploaded by mmichelson (License 5049)
Matthew Jordan [Wed, 27 Mar 2013 14:26:44 +0000 (14:26 +0000)]
AST-2013-001: Prevent buffer overflow through H.264 format negotiation
The format attribute resource for H.264 video performs an unsafe read against a
media attribute when parsing the SDP. The value passed in with the format
attribute is not checked for its length when parsed into a fixed length buffer.
This patch resolves the vulnerability by only reading as many characters from
the SDP value as will fit into the buffer.
Matthew Jordan [Tue, 26 Mar 2013 02:28:31 +0000 (02:28 +0000)]
Resolve deadlock between SIP registration and channel based functions
In r373424, several reentrancy problems in chan_sip were addressed. As a
result, the SIP channel driver is now properly locking the channel driver
private information in certain operations that it wasn't previously. This
exposed two latent problems either in register_verify or by functions called
by register_verify. This includes:
* Holding the private lock while calling sip_send_mwi_to_peer. This can create
a new sip_pvt via sip_alloc, which will obtain the channel container lock.
This is a locking inversion, as any channel related lock must be obtained
prior to obtaining the SIP channel technology private lock.
Note that this issue was already fixed in Asterisk 11.
* Holding the private lock while calling sip_poke_peer. In the same vein as
sip_send_mwi_to_peer, sip_poke_peer can create a new SIP private, causing
the same locking inversion.
Note that this locking inversion typically occured when CLI commands were run
while a SIP REGISTER request was being processed, as many CLI commands (such
as 'sip show channels', 'core show channels', etc.) have to obtain the channel
container lock.
(issue ASTERISK-21068)
Reported by: Nicolas Bouliane
(issue ASTERISK-20550)
Reported by: David Brillert
Matthew Jordan [Tue, 26 Mar 2013 01:52:21 +0000 (01:52 +0000)]
Resolve deadlock between pending CDR and batch CDR locks
r375757 attempted to resolve a race condition between multiple submissions of
CDRs while in batch mode from attempting to destroy the scheduled batch
submission by extending the batch CDR lock. Unfortunately, this causes a
deadlock between the pending CDR lock and the batch CDR lock. This patch
resolves the intent of r375757 by simply providing a new lock that protects
the scheduling of the batches. The original batch CDR lock is kept to protect
manipulation of the batch CDR settings, but has been placed such that it
is not held when the pending lock is held.
Thanks to Chase Venters for providing lock analysis on the issue.
Russell Bryant [Tue, 26 Mar 2013 01:36:27 +0000 (01:36 +0000)]
Fix multi-station answer race condition.
When an SLA trunk is ringing (inbound call on the trunk) Asterisk will
make outbound calls to the stations that have that trunk. If more than
one station answers the call at the same time, all channels other than
the first one to answer are left in a bad state. The channel gets
leaked, is not connected to anything, and there's no way to get rid of
it.
We now properly clean up these losing channels by hanging up on them.
Since they lost the race, as we process their answer, there is no
ringing trunk for them to answer.
........
Merged revisions 383835 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Richard Mudgett [Mon, 25 Mar 2013 23:24:29 +0000 (23:24 +0000)]
Set the CALLERID(dnid-num-plan) for incoming ISDN calls.
The CALLEDTON channel variable is set for incoming ISDN calls to the lower
7 bits of the Q.931 type-of-number/numbering-plan octet. The
CALLERID(dnid-num-plan) should have the same value.
Michael L. Young [Fri, 22 Mar 2013 20:41:40 +0000 (20:41 +0000)]
Fix StopMixMonitor Hanging Up When Unable To Stop MixMonitor On A Channel
A regression was accidentally introduced when allowing an optional ID to be used
when calling StopMixMonitor. When we are unable to stop MixMonitor on a
channel, -1 is being returned which triggers the hangup of the channel.
This patch restores the prior behavior by returning 0 whether we were successful
or not. It also allows the call from the manager to use the return code when
the action fails.
(closes issue ASTERISK-21294)
Reported by: daroz
Tested by: daroz
Patches:
asterisk-21294-stop_mixmonitor_hangingup.diff Michael L. Young (license 5026)
Kinsey Moore [Fri, 15 Mar 2013 12:51:34 +0000 (12:51 +0000)]
tcptls: Prevent unsupported options from being set
AMI, HTTP, and chan_sip all support TLS in some way, but none of them
support all the options that Asterisk's TLS core is capable of
interpreting. This prevents consumers of the TLS/SSL layer from setting
TLS/SSL options that they do not support.
This also gets tlsverifyclient closer to a working state by requesting
the client certificate when tlsverifyclient is set. Currently, there is
no consumer of main/tcptls.c in Asterisk that supports this feature and
so it can not be properly tested.
Review: https://reviewboard.asterisk.org/r/2370/ Reported-by: John Bigelow Patch-by: Kinsey Moore
(closes issue AST-1093)
........
Merged revisions 383165 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Fri, 15 Mar 2013 01:34:12 +0000 (01:34 +0000)]
When a session timer expires during a T.38 call, re-invite with correct SDP
When a session timer expires during a dialog that has re-negotiated to T.38
and Asterisk is the refresher, Asterisk will send a re-INVITE with an SDP
containing audio media only. This causes some hilarity with the poor fax
session under weigh.
This patch corrects that by sending T.38 parameters if we are in the middle of
a T.38 session.
Matthew Jordan [Fri, 15 Mar 2013 01:23:33 +0000 (01:23 +0000)]
Fix processing of call files when using KQueue on OS X
In certain situations, call files are not processed when using KQueue with
pbx_spool. Asterisk was sending an invalid timeout value when the spool
directory is empty, causing the call to kevent to error immediately. This
can create a tight loop, increasing the CPU load on the system.
Michael L. Young [Tue, 12 Mar 2013 21:17:17 +0000 (21:17 +0000)]
Fix Sorting Order For Parking Lots Stored In Static Realtime
When retrieving the parking lots from a MySQL database table, the current order
is "filename, cat_metric desc, var_metric asc, category". If there are multiple
parking lots with the same cat_metric but different categories, everything is
being sorted on cat_metric first resulting in errors when loading the parking
lots.
This patch fixes the problem by sorting on the category field first, then the
cat_metric field.
(closes issue ASTERISK-21035)
Reported by: Alex Epshteyn
Patches:
asterisk-21035-orderby.diff Michael L. Young (license 5026)
........
Merged revisions 382942 from http://svn.asterisk.org/svn/asterisk/branches/1.8
Matthew Jordan [Tue, 12 Mar 2013 16:23:16 +0000 (16:23 +0000)]
Include the Username field in SIP Registry events when Status is registered
In ASTERISK-17888, the AMI Registry event during SIP registrations was supposed
to include the Username field. Somehow, one of the events was missed. This
patch corrects that - the Username field should be included in all AMI Registry
events involving SIP registrations.
projects / thirdparty / asterisk.git / log
