Douglas Bagnall [Sat, 7 Dec 2019 09:56:00 +0000 (22:56 +1300)]
selftest/s4: remove illegal function signature
The character ':' has no meaning in function signatures. Perhaps ';' was
intended, which would have marked the later arguments as optional --
which is the default with no signature. All callers always provide all
the arguments anyway.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz> Reviewed-by: Gary Lockyer <gary@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Douglas Bagnall [Sat, 7 Dec 2019 09:48:42 +0000 (22:48 +1300)]
selftest/s4: don't put pcap file in / by default
If the SOCKET_WRAPPER_PCAP_DIR is not defined, let's assume it wasn't
wanted rather than choosing /.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz> Reviewed-by: Gary Lockyer <gary@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Douglas Bagnall [Sat, 7 Dec 2019 09:45:47 +0000 (22:45 +1300)]
selftest/s4: properly initialise an empty hash
The '%ret = {}' construction was bad because '{}' is a hash-ref, which
counts as a single scalar value, but a true hash like '%ret' must be
initialised with an even number of scalar values (usually in pairs, like
'($a => $b, $c => $d)').
I think this meant %ret was initialised as something harmless like
'(<HASH(0x55ce39781278)> => undef)'.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz> Reviewed-by: Gary Lockyer <gary@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Douglas Bagnall [Sat, 7 Dec 2019 09:38:30 +0000 (22:38 +1300)]
selftest: avoid redeclaring perl variables
None of these ones are doing any harm, we just want to silence these
warnings.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz> Reviewed-by: Gary Lockyer <gary@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
We were declaring the same variable twice with two different paths,
"$cadir/Users/$pkinitprincipalname" here and
"$ctx->{prefix_abs}/pkinit" about 5 lines down.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz> Reviewed-by: Gary Lockyer <gary@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Douglas Bagnall [Sat, 7 Dec 2019 09:37:00 +0000 (22:37 +1300)]
selftest: enable perl warnings
After this we will see more noise with each test run, and these
warnings will be addressed in following commits.
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz> Reviewed-by: Gary Lockyer <gary@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Ralph Wuerthner [Tue, 28 Jan 2020 14:42:03 +0000 (15:42 +0100)]
vfs_gpfs: Remove discard_const_p() from gpfswrap_quotactl() calls
Signed-off-by: Ralph Wuerthner <ralph.wuerthner@de.ibm.com> Reviewed-by: Christof Schmitt <cs@samba.org> Reviewed-by: Gary Lockyer <gary@catalyst.net.nz>
Autobuild-User(master): Christof Schmitt <cs@samba.org>
Autobuild-Date(master): Mon Feb 3 21:53:05 UTC 2020 on sn-devel-184
Signed-off-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Sun Feb 2 10:09:11 UTC 2020 on sn-devel-184
Jeremy Allison [Tue, 28 Jan 2020 22:59:46 +0000 (14:59 -0800)]
s3: VFS: Implement create_dfs_pathat() in catia.
Now we use this instead of symlinks to create
DFS links, it's needed in cap.
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Ralph Böhme <slow@samba.org>
Autobuild-Date(master): Thu Jan 30 18:21:47 UTC 2020 on sn-devel-184
Signed-off-by: Andreas Schneider <asn@samba.org> Reviewed-by: Ralph Boehme <slow@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Jan 30 16:54:33 UTC 2020 on sn-devel-184
Volker Lendecke [Tue, 28 Jan 2020 16:42:13 +0000 (17:42 +0100)]
ctdb-test: Fix a typo
Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Thu Jan 30 13:53:22 UTC 2020 on sn-devel-184
David Mulder [Tue, 10 Dec 2019 19:06:13 +0000 (12:06 -0700)]
s4:torture: Convert samba4.base.charset test to smb2
The partial surrogate test is known to fail (in
both smb1 and smb2).
Signed-off-by: David Mulder <dmulder@suse.com> Signed-off-by: Noel Power <noel.power@suse.com> Reviewed-by: Ralph Böhme <slow@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Noel Power <npower@samba.org>
Autobuild-Date(master): Thu Jan 30 12:05:13 UTC 2020 on sn-devel-184
Volker Lendecke [Tue, 28 Jan 2020 13:46:09 +0000 (14:46 +0100)]
selftest: Exit skipped daemons on close(STDIN)
Without this, teardown_env() will take ages for environments with
skipped daemons
Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Autobuild-User(master): Andrew Bartlett <abartlet@samba.org>
Autobuild-Date(master): Wed Jan 29 11:06:53 UTC 2020 on sn-devel-184
Volker Lendecke [Tue, 28 Jan 2020 13:41:11 +0000 (14:41 +0100)]
selftest: Close STDIN_PIPE's write end for skipped daemons
Without this, any environment that skips any daemon will not shut down
properly. If a copy of a pipe's write end remains, closing one of them
won't cause the read end to be readable, i.e. the daemons waiting for
that won't exit properly.
Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Andrew Bartlett <abartlet@samba.org>
Signed-off-by: Jeremy Allison <jra@samba.org> Reviewed-by: Douglas Bagnall <dbagnall@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Wed Jan 29 01:02:04 UTC 2020 on sn-devel-184
Martin Schwenke [Mon, 13 Jan 2020 23:58:15 +0000 (10:58 +1100)]
ctdb-tests: Enable job control when keeping stdin open
POSIX says:
If job control is disabled (see set, -m), the standard input for an
asynchronous list, before any explicit redirections are performed,
shall be considered to be assigned to a file that has the same
properties as /dev/null. This shall not happen if job control is
enabled. In all cases, explicit redirection of standard input shall
override this activity.
ctdbd is backgrounded at startup, so the above causes stdin to be
redirected from /dev/null. Enable job control to work around this.
Signed-off-by: Martin Schwenke <martin@meltin.net> Reviewed-by: Amitay Isaacs <amitay@gmail.com>
Autobuild-User(master): Martin Schwenke <martins@samba.org>
Autobuild-Date(master): Tue Jan 28 11:24:35 UTC 2020 on sn-devel-184
Martin Schwenke [Mon, 13 Jan 2020 10:04:54 +0000 (21:04 +1100)]
ctdb-daemon: Shut down if interactive and stdin is closed
This allows a test environment to simply close its end of a pipe to
cleanly shutdown ctdbd. Like in smbd, this is only done if stdin is a
pipe or a socket.
Signed-off-by: Martin Schwenke <martin@meltin.net> Reviewed-by: Amitay Isaacs <amitay@gmail.com>
For smbd we want an error and for smbclient we only want it in NOTICE
debug level.
The default log level of smbclient is log level 1 so we need notice to
not spam the user.
Signed-off-by: Guenther Deschner <gd@samba.org> Reviewed-by: Andreas Schneider <asn@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Jan 24 20:38:53 UTC 2020 on sn-devel-184
nsswitch:tests: Add test to check correct group lookup with samlogon cache
TEST FOR: https://bugzilla.samba.org/show_bug.cgi?id=14124
Signed-off-by: Andreas Schneider <asn@samba.org> Reviewed-by: Günther Deschner <gd@samba.org>
Autobuild-User(master): Andreas Schneider <asn@cryptomilk.org>
Autobuild-Date(master): Fri Jan 24 17:18:38 UTC 2020 on sn-devel-184
Volker Lendecke [Wed, 22 Jan 2020 10:47:55 +0000 (11:47 +0100)]
tdb: Align integer types
Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Thu Jan 23 20:41:46 UTC 2020 on sn-devel-184
Signed-off-by: Jeremy Allison <jra@samba.org>
Pair programmed with: Douglas Bagnall <douglas.bagnall@catalyst.net.nz> Reviewed-by: Douglas Bagnall <douglas.bagnall@catalyst.net.nz>
Autobuild-User(master): Jeremy Allison <jra@samba.org>
Autobuild-Date(master): Tue Jan 21 23:33:41 UTC 2020 on sn-devel-184
Christof Schmitt [Thu, 16 Jan 2020 19:17:46 +0000 (12:17 -0700)]
vfs_gpfs: Change lease helper function to only provide mapping
The set_gpfs_lease function first maps the lease argument to the GPFS
version and then issues the API call. Change this to only do the mapping
in the helper function.
Signed-off-by: Christof Schmitt <cs@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
Christof Schmitt [Thu, 16 Jan 2020 19:12:53 +0000 (12:12 -0700)]
vfs_gpfs: Remove call to linux_set_lease_capability
The API call is already done as root user (become_root), so that the
lease contains the root user. The lease capability is already implied by
the root user, so the explicit call to linux_set_lease_capability is not
required.
Signed-off-by: Christof Schmitt <cs@samba.org> Reviewed-by: Jeremy Allison <jra@samba.org>
WHATSNEW: Start release notes for Samba 4.13.0pre1.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Autobuild-User(master): Stefan Metzmacher <metze@samba.org>
Autobuild-Date(master): Tue Jan 21 16:04:29 UTC 2020 on sn-devel-184
Björn Baumbach [Tue, 17 Dec 2019 15:26:23 +0000 (16:26 +0100)]
samba-tool group addmembers: add --member-dn option
The --member-dn option allows to specify an object by it's DN.
This is required to select a specific object if there are more than one
with the same name. Multiple contacts can exist with the same name in
different OUs.
Signed-off-by: Björn Baumbach <bb@sernet.de> Reviewed-by: Ralph Boehme <slow@samba.org>
Björn Baumbach [Fri, 9 Aug 2019 15:07:07 +0000 (17:07 +0200)]
samba-tool group addmembers: add new option --object-types
With this option the admin can specify the object types of the group
members which will be added to the group. The search filter for the objects
will be created according to the types.
Signed-off-by: Björn Baumbach <bb@sernet.de> Reviewed-by: Ralph Boehme <slow@samba.org>
Björn Baumbach [Fri, 9 Aug 2019 14:19:52 +0000 (16:19 +0200)]
python/samdb: add option to specify types of group members
The option can be used to specify the type of the object which have to
be added to (or removed) from a group. The search filter for the objects
will be created according to the types.
Signed-off-by: Björn Baumbach <bb@sernet.de> Reviewed-by: Ralph Boehme <slow@samba.org>
projects / thirdparty / samba.git / log
