MAJOR: stream: don't initialize the stream anymore in stream_accept
The function now only initializes a session, calls the tcp req connection
rules, and calls stream_complete() to finish initialization. If a handshake
is needed, it is done without allocating the stream at all.
Temporarily, in order to limit the amount of changes, the task allocated
is put into sess->task, and it is used by the connection for the handshake
or is offered to the stream. At this point we set the relation between
sess/task/conn this way :
orig -- sess <-- context
| ^ +- task -+ |
v | v |
conn -- owner task
The task must not remain in the session and ultimately it is planned to
remove this task pointer from the session because it can be found by
having conn->owner = task, and looping back from sess to conn, and to
find the session from the connection via the task.
MEDIUM: stream: move all the session-specific stuff of stream_accept() earlier
Since the tcp-request connection rules don't need the stream anymore, we
can safely move the session-specific stuff earlier and prepare for a split
of session and stream initialization. Some work remains to be done.
MEDIUM: stream: don't call stream_store_counters() in kill_mini_session() nor session_accept()
This one is not needed anymore since we cannot track the stream counters
prior to reaching these locations. Only session counters may be tracked
and they're properly committed during session_free().
MAJOR: tcp: make tcp_exec_req_rules() only rely on the session
It passes a NULL wherever a stream was needed (acl_exec_cond() and
action_ptr mainly). It can still track the connection rate correctly
and block based on ACLs.
MEDIUM: streams: support looking up stkctr in the session
In order to support sessions tracking counters, we first ensure that there
is no overlap between streams' stkctr and sessions', and we allow an
automatic lookup into the session's counters when the stream doesn't
have a counter or when the stream doesn't exist during an access via
a sample fetch. The functions used to update the stream counters only
update them and not the session counters however.
MINOR: session: add stick counters to the struct session
The stick counters in the session will be used for everything not related
to contents, hence the connections / concurrent sessions / etc. They will
be usable by "tcp-request connection" rules even without a stream. For now
they're just allocated and initialized.
Doing so ensures we don't need to use the stream anymore to prepare the
log information to report a failed handshake on an embryonic session.
Thus, prepare_mini_sess_log_prefix() now takes a session in argument.
CLEANUP: stream: don't set ->target to the incoming connection anymore
Now that we have sess->origin to carry that information along, we don't
need to put that into strm->target anymore, so we remove one dependence
on the stream in embryonic connections.
MAJOR: sample: pass a pointer to the session to each sample fetch function
Many such function need a session, and till now they used to dereference
the stream. Once we remove the stream from the embryonic session, this
will not be possible anymore.
So as of now, sample fetch functions will be called with this :
MEDIUM: http: remove the now useless http_txn from {req/res} rules
The registerable http_req_rules / http_res_rules used to require a
struct http_txn at the end. It's redundant with struct stream and
propagates very deep into some parts (ie: it was the reason for lua
requiring l7). Let's remove it now.
MAJOR: sample: don't pass l7 anymore to sample fetch functions
All of them can now retrieve the HTTP transaction *if it exists* from
the stream and be sure to get NULL there when called with an embryonic
session.
The patch is a bit large because many locations were touched (all fetch
functions had to have their prototype adjusted). The opportunity was
taken to also uniformize the call names (the stream is now always "strm"
instead of "l4") and to fix indent where it was broken. This way when
we later introduce the session here there will be less confusion.
Now this one is dynamically allocated. It means that 280 bytes of memory
are saved per TCP stream, but more importantly that it will become
possible to remove the l7 pointer from fetches and converters since
it will be deduced from the stream and will support being null.
A lot of care was taken because it's easy to forget a test somewhere,
and the previous code used to always trust s->txn for being valid, but
all places seem to have been visited.
All HTTP fetch functions check the txn first so we shouldn't have any
issue there even when called from TCP. When branching from a TCP frontend
to an HTTP backend, the txn is properly allocated at the same time as the
hdr_idx.
This one will not necessarily be allocated for each stream, and we want
to use the fact that it equals null to know it's not present so that we
can always deduce its presence from the stream pointer.
MEDIUM: http: move header captures from http_txn to struct stream
The header captures are now general purpose captures since tcp rules
can use them to capture various contents. That removes a dependency
on http_txn that appeared in some sample fetch functions and in the
order by which captures and http_txn were allocated.
Interestingly the reset of the header captures were done at too many
places as http_init_txn() used to do it while it was done previously
in every call place.
CLEANUP: sample: remove useless tests in fetch functions for l4 != NULL
The stream may never be null given that all these functions are called
from sample_process(). Let's remove this now confusing test which
sometimes happens after a dereference was already done.
MEDIUM: session: use the pointer to the origin instead of s->si[0].end
When s->si[0].end was dereferenced as a connection or anything in
order to retrieve information about the originating session, we'll
now use sess->origin instead so that when we have to chain multiple
streams in HTTP/2, we'll keep accessing the same origin.
MEDIUM: stream: move the frontend's pointer to the session
Just like for the listener, the frontend is session-wide so let's move
it to the session. There are a lot of places which were changed but the
changes are minimal in fact.
MINOR: session: start to reintroduce struct session
There is now a pointer to the session in the stream, which is NULL
for now. The session pool is created as well. Some parts will move
from the stream to the session now.
REORG/MAJOR: session: rename the "session" entity to "stream"
With HTTP/2, we'll have to support multiplexed streams. A stream is in
fact the largest part of what we currently call a session, it has buffers,
logs, etc.
In order to catch any error, this commit removes any reference to the
struct session and tries to rename most "session" occurrences in function
names to "stream" and "sess" to "strm" when that's related to a session.
The files stream.{c,h} were added and session.{c,h} removed.
The session will be reintroduced later and a few parts of the stream
will progressively be moved overthere. It will more or less contain
only what we need in an embryonic session.
Sample fetch functions and converters will have to change a bit so
that they'll use an L5 (session) instead of what's currently called
"L4" which is in fact L6 for now.
Once all changes are completed, we should see approximately this :
There will be at most one http_txn per stream, and a same session will
possibly be referenced by multiple streams. A connection will point to
a session and to a stream. The session will hold all the information
we need to keep even when we don't yet have a stream.
Some more cleanup is needed because some code was already far from
being clean. The server queue management still refers to sessions at
many places while comments talk about connections. This will have to
be cleaned up once we have a server-side connection pool manager.
Stream flags "SN_*" still need to be renamed, it doesn't seem like
any of them will need to move to the session.
CLEANUP: lua: rename last occurrences of "*s" to "*htxn" for hlua_txn
These ones were found in the actions to set the query/path/method/uri.
Where it's used, "s" makes one think about session or something like
this, especially when mixed with http_txn.
CLEANUP: hlua: stop using variable name "s" alternately for hlua_txn and hlua_smp
hlua_run_sample_fetch() uses "struct hlua_smp *s" which starts to become
confusing when "s->s" is used, then hlua_txn_close() uses this for struct
hlua_txn with the same "s->s" everywhere. Let's uniformize everything with
htxn and hsmp as in other places.
CLEANUP: lua: fix confusing local variable naming in hlua_txn_new()
Struct hlua_txn is called "htxn" or "ht" everywhere, while here it's
called "hs" which is the name used everywhere for struct "hlua_smp".
Such confusion participate to the dangers of copy-pasting code, so
let's fix the name here.
CLEANUP: lua: remove hard-coded sizeof() in object creations and mallocs
Last bug was an example of a side effect of abuse of copy-paste, but
there are other places at risk, so better fix all occurrences of sizeof
to really reference the object size in order to limit the risks in the
future.
BUG/MAJOR: lua: use correct object size when initializing a new converter
In hlua_converters_new(), we used to allocate the size of an hlua_txn
instead of hlua_smp, resulting in random crashes with one integer being
randomly overwritten at the end, even when no converter is being used.
BUG/MAJOR: http: null-terminate the http actions keywords list
Commit a0dc23f ("MEDIUM: http: implement http-request set-{method,path,query,uri}")
forgot to null-terminate the list, resulting in crashes when these actions
are used if the platform doesn't pad the struct with nulls.
Thanks to Gunay Arslan for reporting a detailed trace showing the
origin of this bug.
BUG/MEDIUM: http: hdr_cnt would not count any header when called without name
It's documented that these sample fetch functions should count all headers
and/or all values when called with no name but in practice it's not what is
being done as a missing name causes an immediate return and an absence of
result.
This bug is present in 1.5 as well and must be backported.
Willy Tarreau [Sun, 29 Mar 2015 01:32:06 +0000 (03:32 +0200)]
MAJOR: compression: integrate support for libslz
This library is designed to emit a zlib-compatible stream with no
memory usage and to favor resource savings over compression ratio.
While zlib requires 256 kB of RAM per compression context (and can only
support 4000 connections per GB of RAM), the stateless compression
offered by libslz does not need to retain buffers between subsequent
calls. In theory this slightly reduces the compression ratio but in
practice it does not have that much of an effect since the zlib
window is limited to 32kB.
Libslz is available at :
http://git.1wt.eu/web?p=libslz.git
It was designed for web compression and provides a lot of savings
over zlib in haproxy. Here are the preliminary results on a single
core of a core2-quad 3.0 GHz in 32-bit for only 300 concurrent
sessions visiting the home page of www.haproxy.org (76 kB) with
the default 16kB buffers :
So while the compression ratio is lower, the bandwidth savings are
much more important due to the significantly lower compression cost
which allows to consume even more data from the servers. In the
example above, zlib became the bottleneck at 24% of the output
bandwidth. Also the difference in memory usage is obvious.
More tests run on a single core of a core i5-3320M, with 500 concurrent
users and the default 16kB buffers :
At 100% CPU (no limit) :
BW In BW Out BW Saved Ratio memory VSZ/RSS hits/s
zlib 480 Mbps 188 Mbps 292 Mbps 2.55 130M / 101M 744
slz 1700 Mbps 810 Mbps 890 Mbps 2.10 23.7M / 9.7M 2382
At 85% CPU (limited) :
BW In BW Out BW Saved Ratio memory VSZ/RSS hits/s
zlib 1240 Mbps 976 Mbps 264 Mbps 1.27 130M / 100M 1738
slz 1600 Mbps 976 Mbps 624 Mbps 1.64 23.7M / 9.7M 2210
The most important benefit really happens when the CPU usage is
limited by "maxcompcpuusage" or the BW limited by "maxcomprate" :
in order to preserve resources, haproxy throttles the compression
ratio until usage is within limits. Since slz is much cheaper, the
average compression ratio is much higher and the input bandwidth
is quite higher for one Gbps output.
Other tests made with some reference files :
BW In BW Out BW Saved Ratio hits/s
daniels.html zlib 1320 Mbps 163 Mbps 1157 Mbps 8.10 1925
slz 3600 Mbps 580 Mbps 3020 Mbps 6.20 5300
So on top of saving a lot of memory, slz is constantly 2.5-3.5 times
faster than zlib and results in providing more savings for a fixed CPU
usage. For links smaller than 100 Mbps, zlib still provides a better
compression ratio, at the expense of a much higher CPU usage.
Larger input files provide slightly higher bandwidth for both libs, at
the expense of a bit more memory usage for zlib (it converges to 256kB
per connection).
Willy Tarreau [Sat, 28 Mar 2015 18:17:31 +0000 (19:17 +0100)]
MEDIUM: compression: split deflate_flush() into flush and finish
This function used to take a zlib-specific flag as argument to indicate
whether a buffer flush or end of contents was met, let's split it in two
so that we don't depend on zlib anymore.
Willy Tarreau [Sat, 28 Mar 2015 16:00:39 +0000 (17:00 +0100)]
MEDIUM: compression: add new "raw-deflate" compression algorithm
This algorithm is exactly the same as "deflate" without the zlib wrapper,
and used as an alternative when the browser wants "deflate". All major
browsers understand it and despite violating the standards, it is known
to work better than "deflate", at least on MSIE and some versions of
Safari. Do not use it in conjunction with "deflate", use either one or
the other since both react to the same Accept-Encoding token. Note that
the lack of Adler32 checksum makes it slightly faster.
Willy Tarreau [Sat, 28 Mar 2015 15:40:46 +0000 (16:40 +0100)]
MEDIUM: compression: add a distinction between UA- and config- algorithms
Thanks to MSIE/IIS, the "deflate" name is ambigous. According to the RFC
it's a zlib-wrapped deflate stream, but IIS used to send only a raw deflate
stream, which is the only format MSIE understands for "deflate". The other
widely used browsers do support both formats. For this reason some people
prefer to emit a raw deflate stream on "deflate" to serve more users even
it that means violating the standards. Haproxy only follows the standard,
so they cannot do this.
This patch makes it possible to have one algorithm name in the configuration
and another one in the protocol. This will make it possible to have a new
configuration token to add a different algorithm so that users can decide if
they want a raw deflate or the standard one.
Willy Tarreau [Sat, 28 Mar 2015 14:46:00 +0000 (15:46 +0100)]
CLEANUP: compression: statify all algo-specific functions
There's no reason for exporting identity_* nor deflate_*, they're only
used in the same file. Mark them static, it will make it easier to add
other algorithms.
Willy Tarreau [Sat, 28 Mar 2015 11:20:33 +0000 (12:20 +0100)]
BUG/MINOR: compression: consider the expansion factor in init
When checking if the buffer is large enough, we used to rely on a fixed
size that was "apparently" enough. We need to consider the expansion
factor of deflate-encoded streams instead, which is of 5 bytes per 32kB.
The previous value was OK till 128kB buffers but became wrong past that.
It's totally harmless since we always keep the reserve when compressiong,
so there's 1kB or so available, which is enough for buffers as large as
6.5 MB, but better fix the check anyway.
This fix could be backported into 1.5 since compression was added there.
Willy Tarreau [Sat, 28 Mar 2015 11:05:47 +0000 (12:05 +0100)]
MEDIUM: compression: don't send leading zeroes with chunk size
Till now we used to rely on a fixed maximum chunk size. Thanks to last
commit we're now free to adjust the chunk's length before sending the
data, so we don't have to use 6 digits all the time anymore, and if
one wants buffers larger than 16 MB it is now possible.
Willy Tarreau [Sat, 28 Mar 2015 10:10:56 +0000 (11:10 +0100)]
MEDIUM: compression: postpone buffer adjustments after compression
Till now we used to copy the pending outgoing data into the new buffer,
then compute the chunk size, then compress, then fix the chunk size,
then copy the remaining data into the destination buffer. If the
compression would fail for whatever reason (eg: not enough input bytes
to push an extra block), this work still had to be performed for no
added value. It also presents the disadvantage of having to use a fixed
length to encode the chunk size.
Thanks to the body parser changes that went late into 1.5, the buffers
are not modified anymore during these operations. So this patch rearranges
operations so that they're more optimal :
1) init() prepares a new buffer and reserves space in it for pending
outgoing data (no copy) and for chunk size
2) data are compressed
3) only if data were added to the buffer, then the old data are copied
and the chunk size is set.
A few optimisations are still possible to go further :
- decide whether we prefer to copy pending outgoing data from the
old buffer to the new one, or pending incoming compressed data
from the new one to the old one, based on the amount of outgoing
data available. Given that pending outgoing data are rare and the
operation could be complex in the presence of extra input data,
it's probably better to ignore this one ;
- compute the needed length for the chunk size. This would avoid
sending lots of leading zeroes when not needed.
Joseph Lynch [Fri, 16 Jan 2015 01:52:59 +0000 (17:52 -0800)]
MEDIUM: check: include server address and port in the send-state header
This fixes an issue that occurs when backend servers run on different
addresses or ports and you wish to healthcheck them via a consistent
port. For example, if you allocate backends dynamically as containers
that expose different ports and you use an inetd based healthchecking
component that runs on a dedicated port.
By adding the server address and port to the send-state header, the
healthcheck component can deduce which address and port to check by
reading the X-Haproxy-Server-State header out of the healthcheck and
parsing out the address and port.
Willy Tarreau [Wed, 18 Mar 2015 16:54:59 +0000 (17:54 +0100)]
MEDIUM: lua: implement a simple memory allocator
Lua supports a memory allocator. This is very important as it's the
only way we can control the amount of memory allocatable by Lua scripts.
That avoids prevents bogus scripts from eating all of the system's memory.
The value can be enforced using tune.lua.maxmem in the global section.
Thierry FOURNIER [Tue, 17 Mar 2015 00:09:57 +0000 (01:09 +0100)]
MINOR: lua: add log functions
Thispatch adds global log function. Each log message is writed on
the stderr and is sent to the default syslog server. These two
actions are done according the configuration.
Thierry FOURNIER [Sat, 14 Mar 2015 12:55:46 +0000 (13:55 +0100)]
MINOR: http: split the function http_action_set_req_line() in two parts
The first part is the replacement engine. It take a replacement action
number and a replacement string and process the action.
The second part is the function which is called by the 'http-request
action' to replace a request line part. This function makes the
string used as replacement.
This split permits to use the replacement engine in other parts of the
code than the request action. The Lua use it for his own http action.
Willy Tarreau [Tue, 17 Mar 2015 13:33:22 +0000 (14:33 +0100)]
BUILD: fix automatic inclusion of libdl.
Last commit ecc9547 ("BUILD: lua: it miss the '-ldl' directive") broke
build on systems without libdl (eg: FreeBSD). Since lua requires libdl
on some systems, let's simplify this by adding a USE_DL build directive
to enable/disable use of libdl. It's set by default on all linux flavors.
Thierry FOURNIER [Mon, 16 Mar 2015 22:23:53 +0000 (23:23 +0100)]
BUG/MEDIUM: http: the function "(req|res)-replace-value" doesn't respect the HTTP syntax
These function used an invalid header parser.
- The trailing white-spaces were embedded in the replacement regex,
- The double-quote (") containing comma (,) were not respected.
This patch replace this parser by the "official" parser http_find_header2().
Thierry FOURNIER [Mon, 16 Mar 2015 10:14:41 +0000 (11:14 +0100)]
BUG/MAJOR: http: don't read past buffer's end in http_replace_value
The function http_replace_value use bad variable to detect the end
of the input string.
Regression introduced by the patch "MEDIUM: regex: Remove null
terminated strings." (c9c2daf2)
We need to backport this patch int the 1.5 stable branch.
WT: there is no possibility to overwrite existing data as we only read
past the end of the request buffer, to copy into the trash. The copy
is bounded by buffer_replace2(), just like the replacement performed
by exp_replace(). However if a buffer happens to contain non-zero data
up to the next unmapped page boundary, there's a theorical risk of
crashing the process despite this not being reproducible in tests.
The risk is low because "http-request replace-value" did not work due
to this bug so that probably means it's not used yet.
Thierry FOURNIER [Fri, 13 Mar 2015 13:50:06 +0000 (14:50 +0100)]
BUG/MEDIUM: lua: undetected infinite loop
If the Lua code causes an infinite loop without yield possible, the
clock is not updated. This patch check the clock when the Lua control
code cannot yield.
Willy Tarreau [Fri, 13 Mar 2015 15:43:12 +0000 (16:43 +0100)]
MEDIUM: listener: store the default target per listener
This will be useful later to state that some listeners have to use
certain decoders (typically an HTTP/2 decoder) regardless of the
regular processing applied to other listeners. For now it simply
defaults to the frontend's default target, and it is used by the
session.
Willy Tarreau [Fri, 13 Mar 2015 15:25:15 +0000 (16:25 +0100)]
CLEANUP: listeners: remove unused timeout
Listerner->timeout is a vestigal thing going back to 2007 or so. It
used to only be used by stats and peers frontends to hold a pointer
to the proxy's client timeout. Now that we use regular frontends, we
don't use it anymore.
Willy Tarreau [Fri, 13 Mar 2015 14:55:16 +0000 (15:55 +0100)]
MINOR: proxy: store the default target into the frontend's configuration
Some services such as peers and CLI pre-set the target applet immediately
during accept(), and for this reason they're forced to have a dedicated
accept() function which does not even properly follow everything the regular
one does (eg: sndbuf/rcvbuf/linger/nodelay are not set, etc).
Let's store the default target when known into the frontend's config so that
it's session_accept() which automatically sets it.
Willy Tarreau [Fri, 13 Mar 2015 15:18:25 +0000 (16:18 +0100)]
BUG/MEDIUM: peers: correctly configure the client timeout
The peers frontend timeout was mistakenly set on timeout.connect instead
of timeout.client, resulting in no timeout being applied to the peers
connections. The impact is just that peers can establish connections and
remain connected until they speak. Once they start speaking, only one of
them will still be accepted, and old sessions will be killed, so the
problem is limited. This fix should however be backported to 1.5 since
it was introduced in 1.5-dev3 with peers.
Willy Tarreau [Fri, 13 Mar 2015 13:19:06 +0000 (14:19 +0100)]
CLEANUP: lua: don't use si_ic/si_oc on known stream-ints
When we explicitly write si[0] or si[1], we know whether we're working
with s->req or s->res, so better use that instead of si_ic/si_oc(), to
make the code simpler and more readable.
Thierry FOURNIER [Fri, 13 Mar 2015 12:38:17 +0000 (13:38 +0100)]
BUG/MINOR: lua: set current proxy as default value if it is possible
Some fetches uses a proxy name as first parameter. This is used to identify
frontend, backend or table. This first argument is declared as mandatory,
but the documentation says that is optional.
The behavior of the function smp_resolve_args() is to use the current proxy
if it match the required argument.
This patch implements the same behavior in the Lua argument checker for
sample-fetches and sample-converters.
Thierry FOURNIER [Thu, 12 Mar 2015 23:10:16 +0000 (00:10 +0100)]
MEDIUM: map: uses HAProxy facilities to store default value
The default value is stored in a special struct that describe the
map. This default value is parsed with special parser. This is
useless because HAProxy provides a space to store the default
value (the args) and HAProxy provides also standard parser for
the input types (args again).
This patch remove this special storage and replace it by an argument.
In other way the args of maps are declared as the expected type in
place of strings.
Thierry FOURNIER [Thu, 12 Mar 2015 17:27:10 +0000 (18:27 +0100)]
BUG/MEDIUM: lua: bad argument number in analyser and in error message
The first argument in the stack is 1 and not 0. So the analyzer
starts at bad argument number, and the error message contains
also bad argument number.
Willy Tarreau [Fri, 13 Mar 2015 13:00:47 +0000 (14:00 +0100)]
MEDIUM: channel: don't always set CF_WAKE_WRITE on bi_put*
It was inappropriate to put this flag on every failed write into an
input buffer because it depends where it happens. When it's in the
context of an analyser (eg: hlua) it makes sense. When it's in the
context of an applet (eg: dumpstats), it does not make sense, and
it only happens to work because currently applets are scheduled by
the sessions. The proper solution for applets would be to add the
flag SI_FL_WAIT_ROOM on the stream interface.
Thus, we now don't set any flag anymore in bi_put* and it's up to the
caller to either set CF_WAKE_WRITE on the channel or SI_FL_WAIT_ROOM
on the stream interface. Changes were applied to hlua, peers and
dumpstats.
Willy Tarreau [Thu, 12 Mar 2015 23:40:28 +0000 (00:40 +0100)]
REORG: connection: move conn_drain() to connection.c and rename it
It's now called conn_sock_drain() to make it clear that it only reads
at the sock layer and not at the data layer. The function was too big
to remain inlined and it's used at a few places where size counts.
Willy Tarreau [Thu, 12 Mar 2015 23:32:20 +0000 (00:32 +0100)]
MEDIUM: connection: make conn_drain() perform more controls
Currently si_idle_conn_null_cb() has to perform some low-level checks
over the file descriptor and the connection configuration that should
only belong to conn_drain(). Let's move these controls there. The
function now automatically checks for errors and hangups on the file
descriptor for example, and disables recv polling if there's no drain
function at the control layer.
Willy Tarreau [Thu, 12 Mar 2015 22:56:52 +0000 (23:56 +0100)]
MINOR: connection: implement conn_sock_send()
This function is an equivalent to send() which operates over a connection
instead of a file descriptor. It checks that the control layer is ready
and that it's allowed to send. If automatically enables polling if it
cannot send. It simplifies the return checks by returning zero in all
cases where it cannot send so that the caller only has to care about
negative values indicating errors.
Willy Tarreau [Thu, 12 Mar 2015 22:11:26 +0000 (23:11 +0100)]
MINOR: checks: use conn_data_shutw_hard() instead of call via xprt
Now we only rely on the connection to do the job. This makes the code
cleaner as we don't have any references to the transport shutdown
outside of the connection anymore.
Willy Tarreau [Thu, 12 Mar 2015 22:04:07 +0000 (23:04 +0100)]
MEDIUM: stream-int: replace xprt->shutw calls with conn_data_shutw()
Now that the connection performs the correct controls when shutting down,
use that in the few places where conn->xprt->shutw() was called. The calls
were split between conn_data_shutw() and conn_data_shutw_hard() depending
on the argument. Since the connection flags are updated, we don't need to
call conn_data_stop_send() anymore, instead we just have to call
conn_cond_update_polling().
Willy Tarreau [Thu, 12 Mar 2015 21:51:10 +0000 (22:51 +0100)]
MINOR: connection: perform the call to xprt->shutw() in conn_data_shutw()
This will save callers from having to care about conn->xprt and xprt->shutw.
Note that shutw() takes a second argument indicating whether it's a clean or
a hard shutw. This is used by SSL which tries to close cleanly in most cases.
Here we provide two versions, conn_data_shutw() which performs the clean
close, and conn_data_shutw_hard() which does the unclean one.
Willy Tarreau [Thu, 12 Mar 2015 21:44:53 +0000 (22:44 +0100)]
MINOR: stream-int: use conn_sock_shutw() to shutdown a connection
Stop calling shutdown() on the connection's fd. Note, this also seems
to fix a bug which was harmless, but which consisted in not marking
the connection as shutdown at the socket level until the other side
was shut as well.
Willy Tarreau [Thu, 12 Mar 2015 21:42:29 +0000 (22:42 +0100)]
MINOR: connection: make conn_sock_shutw() actually perform the shutdown() call
This function was not used yet and was only supposed to mark the connection
as shutdown for write. Unfortunately at other places in stream_interface.c,
we're seeing a bit of layering violations with attempts to perform the shutdown
on the fd directly. Let's make this function call shutdown() itself so that
the callers only have to care about the connection.
Willy Tarreau [Thu, 12 Mar 2015 21:32:27 +0000 (22:32 +0100)]
CLEANUP: stream-int: remove a redundant clearing of the linger_risk flag
In stream_sock_read0(), we used to clear this flag. But the only case
where stream_sock_read0() is called is in reaction with a conn_sock_read0()
event coming from the lower layers, which already clears this flag. So let's
remove this duplicate one and clear one of the few remaining layering
violations in this area.
Willy Tarreau [Wed, 11 Mar 2015 22:57:23 +0000 (23:57 +0100)]
[RELEASE] Released version 1.6-dev1
Released version 1.6-dev1 with the following main changes :
- CLEANUP: extract temporary $CFG to eliminate duplication
- CLEANUP: extract temporary $BIN to eliminate duplication
- CLEANUP: extract temporary $PIDFILE to eliminate duplication
- CLEANUP: extract temporary $LOCKFILE to eliminate duplication
- CLEANUP: extract quiet_check() to avoid duplication
- BUG/MINOR: don't start haproxy on reload
- DOC: Address issue where documentation is excluded due to a gitignore rule.
- BUG/MEDIUM: systemd: set KillMode to 'mixed'
- BUILD: fix "make install" to support spaces in the install dirs
- BUG/MINOR: config: http-request replace-header arg typo
- BUG: config: error in http-response replace-header number of arguments
- DOC: missing track-sc* in http-request rules
- BUILD: lua: missing ifdef related to SSL when enabling LUA
- BUG/MEDIUM: regex: fix pcre_study error handling
- MEDIUM: regex: Use pcre_study always when PCRE is used, regardless of JIT
- BUG/MINOR: Fix search for -p argument in systemd wrapper.
- MEDIUM: Improve signal handling in systemd wrapper.
- DOC: fix typo in Unix Socket commands
- BUG/MEDIUM: checks: external checks can't change server status to UP
- BUG/MEDIUM: checks: segfault with external checks in a backend section
- BUG/MINOR: checks: external checks shouldn't wait for timeout to return the result
- BUG/MEDIUM: auth: fix segfault with http-auth and a configuration with an unknown encryption algorithm
- BUG/MEDIUM: config: userlists should ensure that encrypted passwords are supported
- BUG/MINOR: config: don't propagate process binding for dynamic use_backend
- BUG/MINOR: log: fix request flags when keep-alive is enabled
- BUG/MEDIUM: checks: fix conflicts between agent checks and ssl healthchecks
- MINOR: checks: allow external checks in backend sections
- MEDIUM: checks: provide environment variables to the external checks
- MINOR: checks: update dynamic environment variables in external checks
- DOC: checks: environment variables used by "external-check command"
- BUG/MEDIUM: backend: correctly detect the domain when use_domain_only is used
- MINOR: ssl: load certificates in alphabetical order
- BUG/MINOR: checks: prevent http keep-alive with http-check expect
- MINOR: lua: typo in an error message
- MINOR: report the Lua version in -vv
- MINOR: lua: add a compilation error message when compiled with an incompatible version
- BUG/MEDIUM: lua: segfault when calling haproxy sample fetches from lua
- BUILD: try to automatically detect the Lua library name
- BUILD/CLEANUP: systemd: avoid a warning due to mixed code and declaration
- BUG/MEDIUM: backend: Update hash to use unsigned int throughout
- BUG/MEDIUM: connection: fix memory corruption when building a proxy v2 header
- MEDIUM: connection: add new bit in Proxy Protocol V2
- BUG/MINOR: ssl: rejects OCSP response without nextupdate.
- BUG/MEDIUM: ssl: Fix to not serve expired OCSP responses.
- BUG/MINOR: ssl: Fix OCSP resp update fails with the same certificate configured twice.
- BUG/MINOR: ssl: Fix external function in order not to return a pointer on an internal trash buffer.
- MINOR: add fetchs 'ssl_c_der' and 'ssl_f_der' to return DER formatted certs
- MINOR: ssl: add statement to force some ssl options in global.
- BUG/MINOR: ssl: correctly initialize ssl ctx for invalid certificates
- BUG/MEDIUM: ssl: fix bad ssl context init can cause segfault in case of OOM.
- BUG/MINOR: samples: fix unnecessary memcopy converting binary to string.
- MINOR: samples: adds the bytes converter.
- MINOR: samples: adds the field converter.
- MINOR: samples: add the word converter.
- BUG/MINOR: server: move the directive #endif to the end of file
- BUG/MAJOR: buffer: check the space left is enough or not when input data in a buffer is wrapped
- DOC: fix a few typos
- CLEANUP: epoll: epoll_events should be allocated according to global.tune.maxpollevents
- BUG/MINOR: http: fix typo: "401 Unauthorized" => "407 Unauthorized"
- BUG/MINOR: parse: refer curproxy instead of proxy
- BUG/MINOR: parse: check the validity of size string in a more strict way
- BUILD: add new target 'make uninstall' to support uninstalling haproxy from OS
- DOC: expand the docs for the provided stats.
- BUG/MEDIUM: unix: do not unlink() abstract namespace sockets upon failure.
- MEDIUM: ssl: Certificate Transparency support
- MEDIUM: stats: proxied stats admin forms fix
- MEDIUM: http: Compress HTTP responses with status codes 201,202,203 in addition to 200
- BUG/MEDIUM: connection: sanitize PPv2 header length before parsing address information
- MAJOR: namespace: add Linux network namespace support
- MINOR: systemd: Check configuration before start
- BUILD: ssl: handle boringssl in openssl version detection
- BUILD: ssl: disable OCSP when using boringssl
- BUILD: ssl: don't call get_rfc2409_prime when using boringssl
- MINOR: ssl: don't use boringssl's cipher_list
- BUILD: ssl: use OPENSSL_NO_OCSP to detect OCSP support
- MINOR: stats: fix minor typo in HTML page
- MINOR: Also accept SIGHUP/SIGTERM in systemd-wrapper
- MEDIUM: Add support for configurable TLS ticket keys
- DOC: Document the new tls-ticket-keys bind keyword
- DOC: clearly state that the "show sess" output format is not fixed
- MINOR: stats: fix minor typo fix in stats_dump_errors_to_buffer()
- DOC: httplog does not support 'no'
- BUG/MEDIUM: ssl: Fix a memory leak in DHE key exchange
- MINOR: ssl: use SSL_get_ciphers() instead of directly accessing the cipher list.
- BUG/MEDIUM: Consistently use 'check' in process_chk
- MEDIUM: Add external check
- BUG/MEDIUM: Do not set agent health to zero if server is disabled in config
- MEDIUM/BUG: Only explicitly report "DOWN (agent)" if the agent health is zero
- MEDIUM: Remove connect_chk
- MEDIUM: Refactor init_check and move to checks.c
- MEDIUM: Add free_check() helper
- MEDIUM: Move proto and addr fields struct check
- MEDIUM: Attach tcpcheck_rules to check
- MEDIUM: Add parsing of mailers section
- MEDIUM: Allow configuration of email alerts
- MEDIUM: Support sending email alerts
- DOC: Document email alerts
- MINOR: Remove trailing '.' from email alert messages
- MEDIUM: Allow suppression of email alerts by log level
- BUG/MEDIUM: Do not consider an agent check as failed on L7 error
- MINOR: deinit: fix memory leak
- MINOR: http: export the function 'smp_fetch_base32'
- BUG/MEDIUM: http: tarpit timeout is reset
- MINOR: sample: add "json" converter
- BUG/MEDIUM: pattern: don't load more than once a pattern list.
- MINOR: map/acl/dumpstats: remove the "Done." message
- BUG/MAJOR: ns: HAProxy segfault if the cli_conn is not from a network connection
- BUG/MINOR: pattern: error message missing
- BUG/MEDIUM: pattern: some entries are not deleted with case insensitive match
- BUG/MINOR: ARG6 and ARG7 don't fit in a 32 bits word
- MAJOR: poll: only rely on wake_expired_tasks() to compute the wait delay
- MEDIUM: task: call session analyzers if the task is woken by a message.
- MEDIUM: protocol: automatically pick the proto associated to the connection.
- MEDIUM: channel: wake up any request analyzer on response activity
- MINOR: converters: add a "void *private" argument to converters
- MINOR: converters: give the session pointer as converter argument
- MINOR: sample: add private argument to the struct sample_fetch
- MINOR: global: export function and permits to not resolve DNS names
- MINOR: sample: add function for browsing samples.
- MINOR: global: export many symbols.
- MINOR: includes: fix a lot of missing or useless includes
- MEDIUM: tcp: add register keyword system.
- MEDIUM: buffer: make bo_putblk/bo_putstr/bo_putchk return the number of bytes copied.
- MEDIUM: http: change the code returned by the response processing rule functions
- MEDIUM: http/tcp: permit to resume http and tcp custom actions
- MINOR: channel: functions to get data from a buffer without copy
- MEDIUM: lua: lua integration in the build and init system.
- MINOR: lua: add ease functions
- MINOR: lua: add runtime execution context
- MEDIUM: lua: "com" signals
- MINOR: lua: add the configuration directive "lua-load"
- MINOR: lua: core: create "core" class and object
- MINOR: lua: post initialisation bindings
- MEDIUM: lua: add coroutine as tasks.
- MINOR: lua: add sample and args type converters
- MINOR: lua: txn: create class TXN associated with the transaction.
- MINOR: lua: add shared context in the lua stack
- MINOR: lua: txn: import existing sample-fetches in the class TXN
- MINOR: lua: txn: add lua function in TXN that returns an array of http headers
- MINOR: lua: register and execute sample-fetches in LUA
- MINOR: lua: register and execute converters in LUA
- MINOR: lua: add bindings for tcp and http actions
- MINOR: lua: core: add sleep functions
- MEDIUM: lua: socket: add "socket" class for TCP I/O
- MINOR: lua: core: pattern and acl manipulation
- MINOR: lua: channel: add "channel" class
- MINOR: lua: txn: object "txn" provides two objects "channel"
- MINOR: lua: core: can set the nice of the current task
- MINOR: lua: core: can yield an execution stack
- MINOR: lua: txn: add binding for closing the client connection.
- MEDIUM: lua: Lua initialisation "on demand"
- BUG/MAJOR: lua: send function fails and return bad bytes
- MINOR: remove unused declaration.
- MINOR: lua: remove some #define
- MINOR: lua: use bitfield and macro in place of integer and enum
- MINOR: lua: set skeleton for Lua execution expiration
- MEDIUM: lua: each yielding function returns a wake up time.
- MINOR: lua: adds "forced yield" flag
- MEDIUM: lua: interrupt the Lua execution for running other process
- MEDIUM: lua: change the sleep function core
- BUG/MEDIUM: lua: the execution timeout is ignored in yield case
- DOC: lua: Lua configuration documentation
- MINOR: lua: add the struct session in the lua channel struct
- BUG/MINOR: lua: set buffer if it is nnot avalaible.
- BUG/MEDIUM: lua: reset flags before resuming execution
- BUG/MEDIUM: lua: fix infinite loop about channel
- BUG/MEDIUM: lua: the Lua process is not waked up after sending data on requests side
- BUG/MEDIUM: lua: many errors when we try to send data with the channel API
- MEDIUM: lua: use the Lua-5.3 version of the library
- BUG/MAJOR: lua: some function are not yieldable, the forced yield causes errors
- BUG/MEDIUM: lua: can't handle the response bytes
- BUG/MEDIUM: lua: segfault with buffer_replace2
- BUG/MINOR: lua: check buffers before initializing socket
- BUG/MINOR: log: segfault if there are no proxy reference
- BUG/MEDIUM: lua: sockets don't have buffer to write data
- BUG/MEDIUM: lua: cannot connect socket
- BUG/MINOR: lua: sockets receive behavior doesn't follows the specs
- BUG/BUILD: lua: The strict Lua 5.3 version check is not done.
- BUG/MEDIUM: buffer: one byte miss in buffer free space check
- MEDIUM: lua: make the functions hlua_gethlua() and hlua_sethlua() faster
- MINOR: replace the Core object by a simple model.
- MEDIUM: lua: change the objects configuration
- MEDIUM: lua: create a namespace for the fetches
- MINOR: converters: add function to browse converters
- MINOR: lua: wrapper for converters
- MINOR: lua: replace function (req|get)_channel by a variable
- MINOR: lua: fetches and converters can return an empty string in place of nil
- DOC: lua api
- BUG/MEDIUM: sample: fix random number upper-bound
- BUG/MINOR: stats:Fix incorrect printf type.
- BUG/MAJOR: session: revert all the crappy client-side timeout changes
- BUG/MINOR: logs: properly initialize and count log sockets
- BUG/MEDIUM: http: fetch "base" is not compatible with set-header
- BUG/MINOR: counters: do not untrack counters before logging
- BUG/MAJOR: sample: correctly reinitialize sample fetch context before calling sample_process()
- MINOR: stick-table: make stktable_fetch_key() indicate why it failed
- BUG/MEDIUM: counters: fix track-sc* to wait on unstable contents
- BUILD: remove TODO from the spec file and add README
- MINOR: log: make MAX_SYSLOG_LEN overridable at build time
- MEDIUM: log: support a user-configurable max log line length
- DOC: provide an example of how to use ssl_c_sha1
- BUILD: checks: external checker needs signal.h
- BUILD: checks: kill a minor warning on Solaris in external checks
- BUILD: http: fix isdigit & isspace warnings on Solaris
- BUG/MINOR: listener: set the listener's fd to -1 after deletion
- BUG/MEDIUM: unix: failed abstract socket binding is retryable
- MEDIUM: listener: implement a per-protocol pause() function
- MEDIUM: listener: support rebinding during resume()
- BUG/MEDIUM: unix: completely unbind abstract sockets during a pause()
- DOC: explicitly mention the limits of abstract namespace sockets
- DOC: minor fix on {sc,src}_kbytes_{in,out}
- DOC: fix alphabetical sort of converters
- MEDIUM: stick-table: implement lookup from a sample fetch
- MEDIUM: stick-table: add new converters to fetch table data
- MINOR: samples: add two converters for the date format
- BUG/MAJOR: http: correctly rewind the request body after start of forwarding
- DOC: remove references to CPU=native in the README
- DOC: mention that "compression offload" is ignored in defaults section
- DOC: mention that Squid correctly responds 400 to PPv2 header
- BUILD: fix dependencies between config and compat.h
- MINOR: session: export the function 'smp_fetch_sc_stkctr'
- MEDIUM: stick-table: make it easier to register extra data types
- BUG/MINOR: http: base32+src should use the big endian version of base32
- MINOR: sample: allow IP address to cast to binary
- MINOR: sample: add new converters to hash input
- MINOR: sample: allow integers to cast to binary
- BUILD: report commit ID in git versions as well
- CLEANUP: session: move the stick counters declarations to stick_table.h
- MEDIUM: http: add the track-sc* actions to http-request rules
- BUG/MEDIUM: connection: fix proxy v2 header again!
- BUG/MAJOR: tcp: fix a possible busy spinning loop in content track-sc*
- OPTIM/MINOR: proxy: reduce struct proxy by 48 bytes on 64-bit archs
- MINOR: log: add a new field "%lc" to implement a per-frontend log counter
- BUG/MEDIUM: http: fix inverted condition in pat_match_meth()
- BUG/MEDIUM: http: fix improper parsing of HTTP methods for use with ACLs
- BUG/MINOR: pattern: remove useless allocation of unused trash in pat_parse_reg()
- BUG/MEDIUM: acl: correctly compute the output type when a converter is used
- CLEANUP: acl: cleanup some of the redundancy and spaghetti after last fix
- BUG/CRITICAL: http: don't update msg->sov once data start to leave the buffer
- MEDIUM: http: enable header manipulation for 101 responses
- BUG/MEDIUM: config: propagate frontend to backend process binding again.
- MEDIUM: config: properly propagate process binding between proxies
- MEDIUM: config: make the frontends automatically bind to the listeners' processes
- MEDIUM: config: compute the exact bind-process before listener's maxaccept
- MEDIUM: config: only warn if stats are attached to multi-process bind directives
- MEDIUM: config: report it when tcp-request rules are misplaced
- DOC: indicate in the doc that track-sc* can wait if data are missing
- MINOR: config: detect the case where a tcp-request content rule has no inspect-delay
- MEDIUM: systemd-wrapper: support multiple executable versions and names
- BUG/MEDIUM: remove debugging code from systemd-wrapper
- BUG/MEDIUM: http: adjust close mode when switching to backend
- BUG/MINOR: config: don't propagate process binding on fatal errors.
- BUG/MEDIUM: check: rule-less tcp-check must detect connect failures
- BUG/MINOR: tcp-check: report the correct failed step in the status
- DOC: indicate that weight zero is reported as DRAIN
- BUG/MEDIUM: config: avoid skipping disabled proxies
- BUG/MINOR: config: do not accept more track-sc than configured
- BUG/MEDIUM: backend: fix URI hash when a query string is present
- BUG/MEDIUM: http: don't dump debug headers on MSG_ERROR
- BUG/MAJOR: cli: explicitly call cli_release_handler() upon error
- BUG/MEDIUM: tcp: fix outgoing polling based on proxy protocol
- BUILD/MINOR: ssl: de-constify "ciphers" to avoid a warning on openssl-0.9.8
- BUG/MEDIUM: tcp: don't use SO_ORIGINAL_DST on non-AF_INET sockets
- BUG/BUILD: revert accidental change in the makefile from latest SSL fix
- BUG/MEDIUM: ssl: force a full GC in case of memory shortage
- MEDIUM: ssl: add support for smaller SSL records
- MINOR: session: release a few other pools when stopping
- MINOR: task: release the task pool when stopping
- BUG/MINOR: config: don't inherit the default balance algorithm in frontends
- BUG/MAJOR: frontend: initialize capture pointers earlier
- BUG/MINOR: stats: correctly set the request/response analysers
- MAJOR: polling: centralize calls to I/O callbacks
- DOC: fix typo in the body parser documentation for msg.sov
- BUG/MINOR: peers: the buffer size is global.tune.bufsize, not trash.size
- MINOR: sample: add a few basic internal fetches (nbproc, proc, stopping)
- DEBUG: pools: apply poisonning on every allocated pool
- BUG/MAJOR: sessions: unlink session from list on out of memory
- BUG/MEDIUM: patterns: previous fix was incomplete
- BUG/MEDIUM: payload: ensure that a request channel is available
- BUG/MINOR: tcp-check: don't condition data polling on check type
- BUG/MEDIUM: tcp-check: don't rely on random memory contents
- BUG/MEDIUM: tcp-checks: disable quick-ack unless next rule is an expect
- BUG/MINOR: config: fix typo in condition when propagating process binding
- BUG/MEDIUM: config: do not propagate processes between stopped processes
- BUG/MAJOR: stream-int: properly check the memory allocation return
- BUG/MEDIUM: memory: fix freeing logic in pool_gc2()
- BUG/MAJOR: namespaces: conn->target is not necessarily a server
- BUG/MEDIUM: compression: correctly report zlib_mem
- CLEANUP: lists: remove dead code
- CLEANUP: memory: remove dead code
- CLEANUP: memory: replace macros pool_alloc2/pool_free2 with functions
- MINOR: memory: cut pool allocator in 3 layers
- MEDIUM: memory: improve pool_refill_alloc() to pass a refill count
- MINOR: stream-int: retrieve session pointer from stream-int
- MINOR: buffer: reset a buffer in b_reset() and not channel_init()
- MEDIUM: buffer: use b_alloc() to allocate and initialize a buffer
- MINOR: buffer: move buffer initialization after channel initialization
- MINOR: buffer: only use b_free to release buffers
- MEDIUM: buffer: always assign a dummy empty buffer to channels
- MEDIUM: buffer: add a new buf_wanted dummy buffer to report failed allocations
- MEDIUM: channel: do not report full when buf_empty is present on a channel
- MINOR: session: group buffer allocations together
- MINOR: buffer: implement b_alloc_fast()
- MEDIUM: buffer: implement b_alloc_margin()
- MEDIUM: session: implement a basic atomic buffer allocator
- MAJOR: session: implement a wait-queue for sessions who need a buffer
- MAJOR: session: only allocate buffers when needed
- MINOR: stats: report a "waiting" flags for sessions
- MAJOR: session: only wake up as many sessions as available buffers permit
- MINOR: config: implement global setting tune.buffers.reserve
- MINOR: config: implement global setting tune.buffers.limit
- MEDIUM: channel: implement a zero-copy buffer transfer
- MEDIUM: stream-int: support splicing from applets
- OPTIM: stream-int: try to send pending spliced data
- CLEANUP: session: remove session_from_task()
- DOC: add missing entry for log-format and clarify the text
- MINOR: logs: add a new per-proxy "log-tag" directive
- BUG/MEDIUM: http: fix header removal when previous header ends with pure LF
- MINOR: config: extend the default max hostname length to 64 and beyond
- BUG/MEDIUM: channel: fix possible integer overflow on reserved size computation
- BUG/MINOR: channel: compare to_forward with buf->i, not buf->size
- MINOR: channel: add channel_in_transit()
- MEDIUM: channel: make buffer_reserved() use channel_in_transit()
- MEDIUM: channel: make bi_avail() use channel_in_transit()
- BUG/MEDIUM: channel: don't schedule data in transit for leaving until connected
- CLEANUP: channel: rename channel_reserved -> channel_is_rewritable
- MINOR: channel: rename channel_full() to !channel_may_recv()
- MINOR: channel: rename buffer_reserved() to channel_reserved()
- MINOR: channel: rename buffer_max_len() to channel_recv_limit()
- MINOR: channel: rename bi_avail() to channel_recv_max()
- MINOR: channel: rename bi_erase() to channel_truncate()
- BUG/MAJOR: log: don't try to emit a log if no logger is set
- MINOR: tools: add new round_2dig() function to round integers
- MINOR: global: always export some SSL-specific metrics
- MINOR: global: report information about the cost of SSL connections
- MAJOR: init: automatically set maxconn and/or maxsslconn when possible
- MINOR: http: add a new fetch "query" to extract the request's query string
- MINOR: hash: add new function hash_crc32
- MINOR: samples: provide a "crc32" converter
- MEDIUM: backend: add the crc32 hash algorithm for load balancing
- BUG/MINOR: args: add missing entry for ARGT_MAP in arg_type_names
- BUG/MEDIUM: http: make http-request set-header compute the string before removal
- MEDIUM: args: use #define to specify the number of bits used by arg types and counts
- MEDIUM: args: increase arg type to 5 bits and limit arg count to 5
- MINOR: args: add type-specific flags for each arg in a list
- MINOR: args: implement a new arg type for regex : ARGT_REG
- MEDIUM: regex: add support for passing regex flags to regex_exec_match()
- MEDIUM: samples: add a regsub converter to perform regex-based transformations
- BUG/MINOR: sample: fix case sensitivity for the regsub converter
- MEDIUM: http: implement http-request set-{method,path,query,uri}
- DOC: fix missing closing brackend on regsub
- MEDIUM: samples: provide basic arithmetic and bitwise operators
- MEDIUM: init: continue to enforce SYSTEM_MAXCONN with auto settings if set
- BUG/MINOR: http: fix incorrect header value offset in replace-hdr/replace-value
- BUG/MINOR: http: abort request processing on filter failure
- MEDIUM: tcp: implement tcp-ut bind option to set TCP_USER_TIMEOUT
- MINOR: ssl/server: add the "no-ssl-reuse" server option
- BUG/MAJOR: peers: initialize s->buffer_wait when creating the session
- MINOR: http: add a new function to iterate over each header line
- MINOR: http: add the new sample fetches req.hdr_names and res.hdr_names
- MEDIUM: task: always ensure that the run queue is consistent
- BUILD: Makefile: add -Wdeclaration-after-statement
- BUILD/CLEANUP: ssl: avoid a warning due to mixed code and declaration
- BUILD/CLEANUP: config: silent 3 warnings about mixed declarations with code
- MEDIUM: protocol: use a family array to index the protocol handlers
- BUILD: lua: cleanup many mixed occurrences declarations & code
- BUG/MEDIUM: task: fix recently introduced scheduler skew
- BUG/MINOR: lua: report the correct function name in an error message
- BUG/MAJOR: http: fix stats regression consecutive to HTTP_RULE_RES_YIELD
- Revert "BUG/MEDIUM: lua: can't handle the response bytes"
- MINOR: lua: convert IP addresses to type string
- CLEANUP: lua: use the same function names in C and Lua
- REORG/MAJOR: move session's req and resp channels back into the session
- CLEANUP: remove now unused channel pool
- REORG/MEDIUM: stream-int: introduce si_ic/si_oc to access channels
- MEDIUM: stream-int: add a flag indicating which side the SI is on
- MAJOR: stream-int: only rely on SI_FL_ISBACK to find the requested channel
- MEDIUM: stream-interface: remove now unused pointers to channels
- MEDIUM: stream-int: make si_sess() use the stream int's side
- MEDIUM: stream-int: use si_task() to retrieve the task from the stream int
- MEDIUM: stream-int: remove any reference to the owner
- CLEANUP: stream-int: add si_ib/si_ob to dereference the buffers
- CLEANUP: stream-int: add si_opposite() to find the other stream interface
- REORG/MEDIUM: channel: only use chn_prod / chn_cons to find stream-interfaces
- MEDIUM: channel: add a new flag "CF_ISRESP" for the response channel
- MAJOR: channel: only rely on the new CF_ISRESP flag to find the SI
- MEDIUM: channel: remove now unused ->prod and ->cons pointers
- CLEANUP: session: simplify references to chn_{prod,cons}(&s->{req,res})
- CLEANUP: session: use local variables to access channels / stream ints
- CLEANUP: session: don't needlessly pass a pointer to the stream-int
- CLEANUP: session: don't use si_{ic,oc} when we know the session.
- CLEANUP: stream-int: limit usage of si_ic/si_oc
- CLEANUP: lua: limit usage of si_ic/si_oc
- MINOR: channel: add chn_sess() helper to retrieve session from channel
- MEDIUM: session: simplify receive buffer allocator to only use the channel
- MEDIUM: lua: use CF_ISRESP to detect the channel's side
- CLEANUP: lua: remove the session pointer from hlua_channel
- CLEANUP: lua: hlua_channel_new() doesn't need the pointer to the session anymore
- MEDIUM: lua: remove struct hlua_channel
- MEDIUM: lua: remove hlua_sample_fetch
Jeff Buchbinder [Fri, 29 Aug 2014 20:10:08 +0000 (15:10 -0500)]
MEDIUM: stats: proxied stats admin forms fix
Patch for not using relative URLs for admin forms. This allows proxied instances
of the stats admin interface to continue to function, as the default FORM
action is to submit to the current URL.
projects / thirdparty / haproxy.git / log
