Bill Schmidt [Wed, 24 Jan 2018 21:12:55 +0000 (21:12 +0000)]
backport: rs6000-p8swap.c (swap_feeds_both_load_and_store): New function.
2018-01-24 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2018-01-02 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
* config/rs6000/rs6000-p8swap.c (swap_feeds_both_load_and_store):
New function.
(rs6000_analyze_swaps): Mark a web unoptimizable if it contains a
swap associated with both a load and a store.
Max Filippov [Tue, 23 Jan 2018 21:54:09 +0000 (21:54 +0000)]
libgcc: xtensa: fix NaN return from add/sub/mul/div helpers
libgcc/
2018-01-23 Max Filippov <jcmvbkbc@gmail.com>
Backport from mainline
2018-01-23 Max Filippov <jcmvbkbc@gmail.com>
* config/xtensa/ieee754-df.S (__addsf3, __subsf3, __mulsf3)
(__divsf3): Make NaN return value quiet.
* config/xtensa/ieee754-sf.S (__adddf3, __subdf3, __muldf3)
(__divdf3): Make NaN return value quiet.
Michael Meissner [Tue, 23 Jan 2018 15:07:00 +0000 (15:07 +0000)]
backport: re PR target/83862 (powerpc: ICE in signbit testcase)
[gcc]
2018-01-23 Michael Meissner <meissner@linux.vnet.ibm.com>
Back port from trunk
2018-01-22 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/83862
* config/rs6000/rs6000-protos.h (rs6000_split_signbit): Delete,
no longer used.
* config/rs6000/rs6000.c (rs6000_split_signbit): Likewise.
* config/rs6000/rs6000.md (signbit<mode>2): Change code for IEEE
128-bit to produce an UNSPEC move to get the double word with the
signbit and then a shift directly to do signbit.
(signbit<mode>2_dm): Replace old IEEE 128-bit signbit
implementation with a new version that just does either a direct
move or a regular move. Move memory interface to separate insns.
Move insns so they are next to the expander.
(signbit<mode>2_dm_mem_be): New combiner insns to combine load
with signbit move. Split big and little endian case.
(signbit<mode>2_dm_mem_le): Likewise.
(signbit<mode>2_dm_<su>ext): Delete, no longer used.
(signbit<mode>2_dm2): Likewise.
[gcc/testsuite]
2018-01-23 Michael Meissner <meissner@linux.vnet.ibm.com>
Back port from trunk
2018-01-22 Michael Meissner <meissner@linux.vnet.ibm.com>
PR target/83862
* gcc.target/powerpc/pr83862.c: New test.
rtlanal: dead_or_set_regno_p should handle CLOBBER (PR83424)
In PR83424 combine's move_deaths puts a REG_DEAD note in the wrong place
because dead_or_set_regno_p does not account for CLOBBER insns. This
fixes it.
PR rtl-optimization/83424
* rtlanal.c (dead_or_set_regno_p): Handle CLOBBER just like SET.
gcc/testsuite/
PR rtl-optimization/83424
* gcc.dg/pr83424.c: New testsuite.
Jonathan Wakely [Mon, 15 Jan 2018 12:38:56 +0000 (12:38 +0000)]
Fix type printers for Library Fundamentals types
* python/libstdcxx/v6/printers.py (register_type_printers): Remove
printer for experimental::any. Fix printers for experimental::optional
and experimental::basic_string_view.
Jonathan Wakely [Mon, 15 Jan 2018 12:38:52 +0000 (12:38 +0000)]
PR libstdc++/83626 Don't throw for remove("") and remove_all("")
Backport from mainline
2018-01-04 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/83626
* src/filesystem/ops.cc (remove(const path&, error_code&))): Do not
return an error for non-existent paths. Remove unnecessary
symlink_status call.
(remove_all(const path&)): Fix type of result variable.
(remove_all(const path&, error_code&))): Use non-throwing increment
for directory iterator. Do not return an error for non-existent paths.
* testsuite/experimental/filesystem/operations/remove.cc: New test.
* testsuite/experimental/filesystem/operations/remove_all.cc: Fix
expected results for non-existent paths.
Bill Schmidt [Sun, 14 Jan 2018 17:49:39 +0000 (17:49 +0000)]
backport: re PR target/83677 (PPC: The xxpermr instruction is not generated correctly)
[gcc]
2018-01-14 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2018-01-08 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
PR target/83677
* config/rs6000/altivec.md (*altivec_vpermr_<mode>_internal):
Reverse order of second and third operands in first alternative.
* config/rs6000/rs6000.c (rs6000_expand_vector_set): Reverse order
of first and second elements in UNSPEC_VPERMR vector.
(altivec_expand_vec_perm_le): Likewise.
[gcc/testsuite]
2018-01-14 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
Backport from mainline
2018-01-08 Bill Schmidt <wschmidt@linux.vnet.ibm.com>
PR target/83677
* gcc.target/powerpc/pr83677.c: New file.
Jonathan Wakely [Fri, 5 Jan 2018 22:48:28 +0000 (22:48 +0000)]
Improve tests for error reporting in Filesystem TS
Backport from mainline
2017-10-19 Jonathan Wakely <jwakely@redhat.com>
* testsuite/experimental/filesystem/iterators/
recursive_directory_iterator.cc: Ensure that error_code arguments are
cleared when required.
* testsuite/experimental/filesystem/operations/create_directory.cc:
Remove redundant check.
* testsuite/experimental/filesystem/operations/temp_directory_path.cc:
Ensure that error_code argument is cleared when required.
Jonathan Wakely [Fri, 5 Jan 2018 22:48:00 +0000 (22:48 +0000)]
PR libstdc++/83600 fix end iterator for unready std::match_results
Backport from mainline
2017-12-27 Jonathan Wakely <jwakely@redhat.com>
PR libstdc++/83600
* include/bits/regex.h (match_results::end()): Return valid iterator
when not ready.
* testsuite/28_regex/match_results/ctors/char/default.cc: Check that
unready objects are empty and have equal begin and end iterators.
* testsuite/28_regex/match_results/ctors/wchar_t/default.cc: Likewise.
Janne Blomqvist [Wed, 3 Jan 2018 12:08:05 +0000 (14:08 +0200)]
PR libgfortran/83649 Chunk large reads and writes
Backport from trunk.
It turns out that Linux never reads or writes more than 2147479552
bytes in a single syscall. For writes this is not a problem as
libgfortran already contains a loop around write() to handle short
writes. But for reads we cannot do this, since then read will hang if
we have a short read when reading from the terminal. Also, there are
reports that macOS fails I/O's larger than 2 GB. Thus, to work around
these issues do large reads/writes in chunks.
The testcase from the PR
program largewr
integer(kind=1) :: a(2_8**31+1)
a = 0
a(size(a, kind=8)) = 1
open(10, file="largewr.dat", access="stream", form="unformatted")
write (10) a
close(10)
a(size(a, kind=8)) = 2
open(10, file="largewr.dat", access="stream", form="unformatted")
read (10) a
if (a(size(a, kind=8)) == 1) then
print *, "All is well"
else
print *, "Oh no"
end if
end program largewr
fails on trunk but works with the patch.
Regtested on x86_64-pc-linux-gnu, committed to trunk.
libgfortran/ChangeLog:
2018-01-03 Janne Blomqvist <jb@gcc.gnu.org>
PR libgfortran/83649
* io/unix.c (MAX_CHUNK): New define.
(raw_read): For reads larger than MAX_CHUNK, loop.
(raw_write): Write no more than MAX_CHUNK bytes per iteration.
backport: pa.c (pa_legitimate_address_p): For scaled indexing...
Backport from mainline
2017-12-03 John David Anglin <danglin@gcc.gnu.org>
* config/pa/pa.c (pa_legitimate_address_p): For scaled indexing,
require base operand is a REG_POINTER prior to reload on targets
with non-equivalent space registers.
Jerry DeLisle [Sat, 16 Dec 2017 22:41:13 +0000 (22:41 +0000)]
backport: re PR libfortran/81937 (stack-buffer-overflow on memcpy in libgfortran/io/unix.c on character(kind=4))
2017-12-16 Jerry DeLisle <jvdelisle@gcc.gnu.org>
Backport from trunk
PR libgfortran/81937
* io/list_read.c (next_char_internal): Don't attempt to read
from the internal unit stream if no bytes are left. Decrement
bytes_left in the right place.
Peter Bergner [Fri, 15 Dec 2017 03:41:16 +0000 (21:41 -0600)]
backport: re PR target/80210 (ICE in in extract_insn, at recog.c:2311 on ppc64 for with __builtin_pow)
gcc/
Backport from mainline
2017-10-02 Peter Bergner <bergner@vnet.ibm.com>
PR target/80210
* config/rs6000/rs6000.c (rs6000_option_override_internal): Rewrite
function to not use the have_cpu variable. Do not set cpu_index,
rs6000_cpu_index or rs6000_tune_index if we end up using TARGET_DEFAULT
or the default cpu.
(rs6000_valid_attribute_p): Remove duplicate initializations of
old_optimize and func_optimize.
(rs6000_pragma_target_parse): Call rs6000_activate_target_options ().
(rs6000_activate_target_options): Make global.
* config/rs6000/rs6000-protos.h (rs6000_activate_target_options): Add
prototype.
gcc/testsuite/
Backport from mainline
2017-10-02 Peter Bergner <bergner@vnet.ibm.com>
PR target/80210
* gcc.target/powerpc/pr80210-2.c: New test.
Jonathan Wakely [Thu, 14 Dec 2017 12:01:40 +0000 (12:01 +0000)]
PR libstdc++/59568 don't use putback or update value when extraction fails
PR libstdc++/59568
* include/std/complex (operator>>): Only use putback if a character
was successfully extracted and only set the value if a number was
successfully extracted.
* testsuite/26_numerics/complex/inserters_extractors/char/59568.cc:
New test.
Thomas Schwinge [Mon, 11 Dec 2017 09:49:25 +0000 (10:49 +0100)]
[PR c++/83301] cgraph.c segfault
Backport trunk r243377:
gcc/
2016-12-07 Jakub Jelinek <jakub@redhat.com>
PR c++/78692
* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Set lhs
var to lhs of new_stmt right before noreturn handling rather than to
lhs of e->call_stmt early.
gcc/testsuite/
2016-12-07 Jakub Jelinek <jakub@redhat.com>
PR c++/78692
* g++.dg/torture/pr78692.C: New test.
Sebastian Peryt [Mon, 4 Dec 2017 11:40:44 +0000 (12:40 +0100)]
Fix PR82941 and PR82942 by adding proper vzeroupper generation on SKX.
Add X86_TUNE_EMIT_VZEROUPPER to indicate if vzeroupper instruction should
be inserted before a transfer of control flow out of the function. It is
turned on by default unless we are tuning for KNL. Users can always use
-mzeroupper or -mno-zeroupper to override X86_TUNE_EMIT_VZEROUPPER.
2017-12-04 Sebastian Peryt <sebastian.peryt@intel.com>
H.J. Lu <hongjiu.lu@intel.com>
gcc/
Bakcported from trunk
PR target/82941
PR target/82942
PR target/82990
* config/i386/i386.c (pass_insert_vzeroupper): Remove
TARGET_AVX512F check from gate condition.
(ix86_check_avx256_register): Changed to ...
(ix86_check_avx_upper_register): ... this. Add extra check for
VALID_AVX512F_REG_OR_XI_MODE.
(ix86_avx_u128_mode_needed): Changed
ix86_check_avx256_register to ix86_check_avx_upper_register.
(ix86_check_avx256_stores): Changed to ...
(ix86_check_avx_upper_stores): ... this. Changed
ix86_check_avx256_register to ix86_check_avx_upper_register.
(ix86_avx_u128_mode_after): Changed
avx_reg256_found to avx_upper_reg_found. Changed
ix86_check_avx256_stores to ix86_check_avx_upper_stores.
(ix86_avx_u128_mode_entry): Changed
ix86_check_avx256_register to ix86_check_avx_upper_register.
(ix86_avx_u128_mode_exit): Ditto.
(ix86_option_override_internal): Set MASK_VZEROUPPER if
neither -mzeroupper nor -mno-zeroupper is used and
TARGET_EMIT_VZEROUPPER is set.
* config/i386/i386.h: (host_detect_local_cpu): New define.
(TARGET_EMIT_VZEROUPPER): New.
* config/i386/x86-tune.def: Add X86_TUNE_EMIT_VZEROUPPER.
The current rs6000 rtx_cost for comparisons against 0 is very high if
TARGET_ISEL && !TARGET_MFCRF, much higher than for reg-reg comparisons,
much higher than a load of 0 and such a reg-reg-comparison. This leads
to infinite recursion in CSE (see PR81288).
This patch removes the too-high cost, also simplifying this code.
PR 81288/target
* config/rs6000/rs6000.c (rs6000_rtx_costs): Do not handle
TARGET_ISEL && !TARGET_MFCRF differently. Simplify code.
projects / thirdparty / gcc.git / log
