kcalloc() may fail. When WS is non-zero and allocation fails, ectx.ws
remains NULL while ectx.ws_size is set, leading to a potential NULL
pointer dereference in atom_get_src_int() when accessing WS entries.
Return -ENOMEM on allocation failure to avoid the NULL dereference.
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The transaction manager initialization in txInit() was not properly
initializing TxBlock[0].waitor waitqueue, causing a crash when
txEnd(0) is called on read-only filesystems.
When a filesystem is mounted read-only, txBegin() returns tid=0 to
indicate no transaction. However, txEnd(0) still gets called and
tries to access TxBlock[0].waitor via tid_to_tblock(0), but this
waitqueue was never initialized because the initialization loop
started at index 1 instead of 0.
This causes a 'non-static key' lockdep warning and system crash:
INFO: trying to register non-static key in txEnd
Fix by ensuring all transaction blocks including TxBlock[0] have
their waitqueues properly initialized during txInit().
Reported-by: syzbot+c4f3462d8b2ad7977bea@syzkaller.appspotmail.com Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, all master upper netdevices (e.g., bond, VRF) are treated
equally.
When a VRF netdevice is used over an IPoIB netdevice, the expected
netdev resolution is on the lower IPoIB device which has the IP address
assigned to it and not the VRF device.
The rdma_cm module (CMA) tries to match incoming requests to a
particular netdevice. When successful, it also validates that the return
path points to the same device by performing a routing table lookup.
Currently, the former would resolve to the VRF netdevice, while the
latter to the correct lower IPoIB netdevice, leading to failure in
rdma_cm.
Improve this by ignoring the VRF master netdevice, if it exists, and
instead return the lower IPoIB device.
Add READ_ONCE() annotations because np->rxpmtu can be changed
while udpv6_recvmsg() and rawv6_recvmsg() read it.
Since this is a very rarely used feature, and that udpv6_recvmsg()
and rawv6_recvmsg() read np->rxopt anyway, change the test order
so that np->rxpmtu does not need to be in a hot cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20250916160951.541279-4-edumazet@google.com Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add xhci support for PCI hosts that have zero USB3 ports.
Avoid creating a shared Host Controller Driver (HCD) when there is only
one root hub. Additionally, all references to 'xhci->shared_hcd' are now
checked before use.
Only xhci-pci.c requires modification to accommodate this change, as the
xhci core already supports configurations with zero USB3 ports. This
capability was introduced when xHCI Platform and MediaTek added support
for zero USB3 ports.
Logically before a waiting side which has already timed out turns the
atomic status back to idle, a completing side could still pass atomic
condition and call complete. It will make the following H2C commands,
waiting C2H events, get a completion unexpectedly early. Hence, renew
a completion for each H2C command waiting a C2H event.
When we get wrong extent info data, and look up extent_node in rb tree,
it will cause infinite loop (CONFIG_F2FS_CHECK_FS=n). Avoiding this by
return NULL and print some kernel messages in that case.
Allow autosuspend to be used by xhci plat device. For Qualcomm SoCs,
when in host mode, it is intended that the controller goes to suspend
state to save power and wait for interrupts from connected peripheral
to wake it up. This is particularly used in cases where a HID or Audio
device is connected. In such scenarios, the usb controller can enter
auto suspend and resume action after getting interrupts from the
connected device.
The usbmon binary interface currently truncates captures of large
transfers from higher-speed USB devices. Because a single event capture
is limited to one-fifth of the total buffer size, the current maximum
size of a captured URB is around 240 KiB. This is insufficient when
capturing traffic from modern devices that use transfers of several
hundred kilobytes or more, as truncated URBs can make it impossible for
user-space USB analysis tools like Wireshark to properly defragment and
reassemble higher-level protocol packets in the captured data.
The root cause of this issue is the 1200 KiB BUFF_MAX limit, which has
not been changed since the binary interface was introduced in 2006.
To resolve this issue, this patch increases BUFF_MAX to 64 MiB. The
original comment for BUFF_MAX based the limit's calculation on a
saturated 480 Mbit/s bus. Applying the same logic to a modern USB 3.2
Gen 2×2 20 Gbit/s bus (~2500 MB/s over a 20ms window) indicates the
buffer should be at least 50 MB. The new limit of 64 MiB covers that,
plus a little extra for any overhead.
With this change, both users and developers should now be able to debug
and reverse engineer modern USB devices even when running unmodified
distro kernels.
Please note that this change does not affect the default buffer size. A
larger buffer is only allocated when a user explicitly requests it via
the MON_IOCT_RING_SIZE ioctl, so the change to the maximum buffer size
should not unduly increase memory usage for users that don't
deliberately request a larger buffer.
There is a timing race condition when a PRLI may be sent on the wire
before PLOGI_ACC in Point to Point topology. Fix by deferring REG_RPI
mbox completion handling to after PLOGI_ACC's CQE completion. Because
the discovery state machine only sends PRLI after REG_RPI mbox
completion, PRLI is now guaranteed to be sent after PLOGI_ACC.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-8-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
To assist in debugging lpfc_xri_rebalancing driver parameter, a debugfs
entry is used. The debugfs file operations for xri rebalancing have
been previously implemented, but lack definition for its information
buffer size. Similar to other pre-existing debugfs entry buffers,
define LPFC_HDWQINFO_SIZE as 8192 bytes.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-9-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In lpfc_cleanup, there is an extraneous nlp_put for NPIV ports on the
F_Port_Ctrl ndlp object. In cases when an ABTS is issued, the
outstanding kref is needed for when a second XRI_ABORTED CQE is
received. The final kref for the ndlp is designed to be decremented in
lpfc_sli4_els_xri_aborted instead. Also, add a new log message to allow
for future diagnostics when debugging related issues.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-5-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If lpfc_reset_flush_io_context fails to execute, then the wrong return
status code may be passed back to upper layers when issuing a target
reset TMF command. Fix by checking the return status from
lpfc_reset_flush_io_context() first in order to properly return FAILED
or FAST_IO_FAIL.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-7-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kref for Fabric_DID ndlps is not decremented after repeated FDISC
failures and exhausting maximum allowed retries. This can leave the
ndlp lingering unnecessarily. Add a test and set bit operation for the
NLP_DROPPED flag. If not previously set, then a kref is decremented. The
ndlp is freed when the remaining reference for the completing ELS is
put.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-6-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
lpfc_sli4_queue_setup() does not allocate memory and is used for
submitting CREATE_QUEUE mailbox commands. Thus, if such mailbox
commands fail we should clean up by also freeing the memory allocated
for the queues with lpfc_sli4_queue_destroy(). Change the intended
clean up label for the lpfc_sli4_queue_setup() error case to
out_destroy_queue.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Message-ID: <20250915180811.137530-4-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some Kioxia UFS 4 devices do not support the qTimestamp attribute. Set
the UFS_DEVICE_QUIRK_NO_TIMESTAMP_SUPPORT for these devices such that no
error messages appear in the kernel log about failures to set the
qTimestamp attribute.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Avri Altman <avri.altman@sandisk.com> Tested-by: Nitin Rawat <quic_nitirawa@quicinc.com> # on SM8650-QRD Reviewed-by: Nitin Rawat <quic_nitirawa@quicinc.com> Reviewed-by: Peter Wang <peter.wang@mediatek.com> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Message-ID: <20250909190614.3531435-1-bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The selftests 'make clean' does not clean the net/lib because it only
processes $(TARGETS) and ignores $(INSTALL_DEP_TARGETS). This leaves
compiled objects in net/lib after cleaning, requiring manual cleanup.
Include $(INSTALL_DEP_TARGETS) in clean target to ensure net/lib
dependency is properly cleaned.
Signed-off-by: Nai-Chen Cheng <bleach1827@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://patch.msgid.link/20250910-selftests-makefile-clean-v1-1-29e7f496cd87@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Gang submission means that the kernel driver guarantees that multiple
submissions are executed on the HW at the same time on different engines.
Background is that those submissions then depend on each other and each
can't finish stand alone.
SRIOV now uses world switch to preempt submissions on the engines to allow
sharing the HW resources between multiple VFs.
The problem is now that the SRIOV world switch can't know about such inter
dependencies and will cause a timeout if it waits for a partially running
gang submission.
To conclude SRIOV and gang submissions are fundamentally incompatible at
the moment. For now just disable them.
Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to multiple explosion issues in the early days of the Xe driver,
the GuC load was hacked to never return a failure. That prevented
kernel panics and such initially, but now all it achieves is creating
more confusing errors when the driver tries to submit commands to a
GuC it already knows is not there. So fix that up.
As a stop-gap and to help with debug of load failures due to invalid
GuC init params, a wedge call had been added to the inner GuC load
function. The reason being that it leaves the GuC log accessible via
debugfs. However, for an end user, simply aborting the module load is
much cleaner than wedging and trying to continue. The wedge blocks
user submissions but it seems that various bits of the driver itself
still try to submit to a dead GuC and lots of subsequent errors occur.
And with regards to developers debugging why their particular code
change is being rejected by the GuC, it is trivial to either add the
wedge back in and hack the return code to zero again or to just do a
GuC log dump to dmesg.
v2: Add support for error injection testing and drop the now redundant
wedge call.
Dell systems utilize an EC-based touchpad emulation when the ACPI
touchpad _DSM is not invoked. This emulation acts as a secondary
master on the I2C bus, designed for scenarios where the I2C touchpad
driver is absent, such as in BIOS menus. Typically, loading the
i2c-hid module triggers the _DSM at initialization, disabling the
EC-based emulation.
However, if the i2c-hid module is missing from the boot kernel
used for hibernation snapshot restoration, the _DSM remains
uncalled, resulting in dual masters on the I2C bus and
subsequent arbitration errors. This issue arises when i2c-hid
resides in the rootfs instead of the kernel or initramfs.
To address this, switch from using the SYSTEM_SLEEP_PM_OPS()
macro to dedicated callbacks, introducing a specific
callback for restoring the S4 image. This callback ensures
the _DSM is invoked.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Benjamin Tissoires <bentiss@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A lot of modern SoC have the ability to store MAC addresses in their
NVMEM. So extend the generic function device_get_mac_address() to
obtain the MAC address from an nvmem cell named 'mac-address' in
case there is no firmware node which contains the MAC address directly.
Driver authors often forget to add GFP_NOWARN for page allocation
from the datapath. This is annoying to users as OOMs are a fact
of life, and we pretty much expect network Rx to hit page allocation
failures during OOM. Make page pool add GFP_NOWARN for ATOMIC allocations
by default.
dml21_map_dc_state_into_dml_display_cfg calls (the call is usually
inlined by the compiler) populate_dml21_surface_config_from_plane_state
and populate_dml21_plane_config_from_plane_state which may use FPU. In
a x86-64 build:
Thus it needs to be guarded with DC_FP_START. But we must note that the
current code quality of the in-kernel FPU use in AMD dml2 is very much
problematic: we are actually calling DC_FP_START in dml21_wrapper.c
here, and this translation unit is built with CC_FLAGS_FPU. Strictly
speaking this does not make any sense: with CC_FLAGS_FPU the compiler is
allowed to generate FPU uses anywhere in the translated code, perhaps
out of the DC_FP_START guard. This problematic pattern also occurs in
at least dml2_wrapper.c, dcn35_fpu.c, and dcn351_fpu.c. Thus we really
need a careful audit and refactor for the in-kernel FPU uses, and this
patch is simply whacking a mole. However per the reporter, whacking
this mole is enough to make a 9060XT "just work."
Reported-by: Asiacn <710187964@qq.com> Closes: https://github.com/loongson-community/discussions/issues/102 Tested-by: Asiacn <710187964@qq.com> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Reviewed-by: Huacai Chen <chenhuacai@loongson.cn> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the EDID has the HDMI bit, we should simply select
the HDMI signal type even on DVI ports.
For reference see, the legacy amdgpu display code:
amdgpu_atombios_encoder_get_encoder_mode
which selects ATOM_ENCODER_MODE_HDMI for the same case.
This commit fixes DVI connectors to work with DVI-D/HDMI
adapters so that they can now produce output over these
connectors for HDMI monitors with higher bandwidth modes.
With this change, even HDMI audio works through DVI.
For testing, I used a CAA-DMDHFD3 DVI-D/HDMI adapter
with the following GPUs:
Tahiti (DCE 6) - DC can now output 4K 30 Hz over DVI
Polaris 10 (DCE 11.2) - DC can now output 4K 60 Hz over DVI
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Normally resources are evicted on dGPUs at suspend or hibernate and
on APUs at hibernate. These steps are unnecessary when using the S4
callbacks to put the system into S5.
Cc: AceLan Kao <acelan.kao@canonical.com> Cc: Kai-Heng Feng <kaihengf@nvidia.com> Cc: Mark Pearson <mpearson-lenovo@squebb.ca> Cc: Denis Benato <benato.denis96@gmail.com> Cc: Merthan Karakaş <m3rthn.k@gmail.com> Tested-by: Eric Naim <dnaim@cachyos.org> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[why&how]
small error in order of operations in immediateflipbytes
calculation on dml ms side that can result in dml ms
and mp mismatch immediateflip support for a given pipe
and thus an invalid hw state, correct the order to align
with mp.
Reviewed-by: Leo Chen <leo.chen@amd.com> Signed-off-by: Ausef Yousof <Ausef.Yousof@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why]
fill_stream_properties_from_drm_display_mode() will not configure pixel
encoding to YCBCR422 when the DRM color format supports YCBCR422 but not
YCBCR420 or YCBCR4444. Instead it will fallback to RGB.
[How]
Add support for YCBCR422 in pixel encoding mapping.
Suggested-by: Mauri Carvalho <mcarvalho3@lenovo.com> Reviewed-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Mario Limonciello <Mario.Limonciello@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If multiple instances of this driver are instantiated and try to send
concurrently then the single static buffer snd_serial_generic_tx_work()
will cause corruption in the data output.
Move the buffer into the per-instance driver data to avoid this.
EPCS is not yet ready, so do not claim to support it.
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20250904-mt7996-mlo-more-fixes-v1-4-89d8fed67f20@kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Enable 160MHz beamformee support on mt7922 by updating HE capability
element configuration. Previously, only 160MHz channel width was set,
but beamformee for 160MHz was not properly advertised. This patch
adds BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 capability to allow devices
to utilize 160MHz BW for beamforming.
Tested by connecting to 160MHz-bandwidth beamforming AP and verified
HE capability.
During recent testing with the netem qdisc to inject delays into TCP
traffic, we observed that our CLS BPF program failed to function correctly
due to incorrect classid retrieval from task_get_classid(). The issue
manifests in the following call stack:
The problem occurs when multiple tasks share a single qdisc. In such cases,
__qdisc_run() may transmit skbs created by different tasks. Consequently,
task_get_classid() retrieves an incorrect classid since it references the
current task's context rather than the skb's originating task.
Given that dev_queue_xmit() always executes with bh disabled, we can use
softirq_count() instead to obtain the correct classid.
The simple steps to reproduce this issue:
1. Add network delay to the network interface:
such as: tc qdisc add dev bond0 root netem delay 1.5ms
2. Build two distinct net_cls cgroups, each with a network-intensive task
3. Initiate parallel TCP streams from both tasks to external servers.
Under this specific condition, the issue reliably occurs. The kernel
eventually dequeues an SKB that originated from Task-A while executing in
the context of Task-B.
It is worth noting that it will change the established behavior for a
slightly different scenario:
<sock S is created by task A>
<class ID for task A is changed>
<skb is created by sock S xmit and classified>
prior to this patch the skb will be classified with the 'new' task A
classid, now with the old/original one. The bpf_get_cgroup_classid_curr()
function is a more appropriate choice for this case.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Thomas Graf <tgraf@suug.ch> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250902062933.30087-1-laoar.shao@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
during entropy evaluation, if the generated samples fail
any statistical test, then, all of the bits will be discarded,
and a second set of samples will be generated and tested.
the entropy delay interval should be doubled before performing the
retry.
also, ctrlpriv->rng4_sh_init and inst_handles both reads RNG DRNG
status register, but only inst_handles is updated before every retry.
so only check inst_handles and removing ctrlpriv->rng4_sh_init
payload_size field of the request header is incorrectly calculated using
sizeof(req). Since 'req' is a pointer (struct hsti_request *), sizeof(req)
returns the size of the pointer itself (e.g., 8 bytes on a 64-bit system),
rather than the size of the structure it points to. This leads to an
incorrect payload size being sent to the Platform Security Processor (PSP),
potentially causing the HSTI query command to fail.
Fix this by using sizeof(*req) to correctly calculate the size of the
struct hsti_request.
Signed-off-by: Yunseong Kim <ysk@kzalloc.com> Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>> --- Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
dw_pcie_edma_irq_verify() is supposed to verify the eDMA IRQs in devicetree
by fetching them using either 'dma' or 'dmaX' IRQ names. Former is used
when the platform uses a single IRQ for all eDMA channels and latter is
used when the platform uses separate IRQ per channel. But currently,
dw_pcie_edma_irq_verify() bails out early if edma::nr_irqs is 1, i.e., when
a single IRQ is used. This gives an impression that the driver could work
with any single IRQ in devicetree, not necessarily with name 'dma'.
But dw_pcie_edma_irq_vector(), which actually requests the IRQ, does
require the single IRQ to be named as 'dma'. So this creates inconsistency
between dw_pcie_edma_irq_verify() and dw_pcie_edma_irq_vector().
Thus, to fix this inconsistency, make sure dw_pcie_edma_irq_verify() also
verifies the single IRQ name by removing the bail out code.
Fix the issue of max_timeout being calculated larger than actual value.
The calculation result of freq / (S3C2410_WTCON_PRESCALE_MAX + 1) /
S3C2410_WTCON_MAXDIV is smaller than the actual value because the remainder
is discarded during the calculation process. This leads to a larger
calculated value for max_timeout compared to the actual settable value.
To resolve this issue, the order of calculations in the computation process
has been adjusted.
The Asus Z13 folio has a multitouch touchpad that needs to bind
to the hid-multitouch driver in order to work properly. So bind
it to the HID_GROUP_GENERIC group to release the touchpad and
move it to the bottom so that the comment applies to it.
While at it, change the generic KEYBOARD3 name to Z13_FOLIO.
Reviewed-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
netdev_WARN() uses WARN/WARN_ON to print a backtrace along with
file and line information. In this case, udp_tunnel_nic_register()
returning an error is just a failed operation, not a kernel bug.
udp_tunnel_nic_register() can fail due to a memory allocation
failure (kzalloc() or udp_tunnel_nic_alloc()).
This is a normal runtime error and not a kernel bug.
Replace netdev_WARN() with netdev_warn() accordingly.
tcp_recvmsg_dmabuf can export the following errors:
- EFAULT when linear copy fails
- ETOOSMALL when cmsg put fails
- ENODEV if one of the frags is readable
- ENOMEM on xarray failures
But they are all ignored and replaced by EFAULT in the caller
(tcp_recvmsg_locked). Expose real error to the userspace to
add more transparency on what specifically fails.
In non-devmem case (skb_copy_datagram_msg) doing `if (!copied)
copied=-EFAULT` is ok because skb_copy_datagram_msg can return only EFAULT.
Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250910162429.4127997-1-sdf@fomichev.me Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When 8139too is probing and 8139TOO_PIO=y it will call pci_iomap_range()
and from there __pci_ioport_map() for the PCI IO space.
If HAS_IOPORT_MAP=n and NO_GENERIC_PCI_IOPORT_MAP=n, like it is on my
m68k config, __pci_ioport_map() becomes NULL, pci_iomap_range() will
always fail and the driver will complain it couldn't map the PIO space
and return an error.
NO_IOPORT_MAP seems to cover the case where what 8139too is trying
to do cannot ever work so make 8139TOO_PIO depend on being it false
and avoid creating an unusable driver.
The commit b2798ba0b876 ("KVM: X86: Choose qspinlock when dedicated
physical CPUs are available") states that when PV_DEDICATED=1
(vCPU has dedicated pCPU), qspinlock should be preferred regardless of
PV_UNHALT. However, the current implementation doesn't reflect this: when
PV_UNHALT=0, we still use virt_spin_lock() even with dedicated pCPUs.
This is suboptimal because:
1. Native qspinlocks should outperform virt_spin_lock() for dedicated
vCPUs irrespective of HALT exiting
2. virt_spin_lock() should only be preferred when vCPUs may be preempted
(non-dedicated case)
So reorder the PV spinlock checks to:
1. First handle dedicated pCPU case (disable virt_spin_lock_key)
2. Second check single CPU, and nopvspin configuration
3. Only then check PV_UNHALT support
This ensures we always use native qspinlock for dedicated vCPUs, delivering
pretty performance gains at high contention levels.
Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Tested-by: Wangyang Guo <wangyang.guo@intel.com> Link: https://lore.kernel.org/r/20250722110005.4988-1-lirongqing@baidu.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
But the icmp reject 'netdev' family versions will reply to icmp
dst-unreach errors, unlike icmp_send() and icmp6_send() which are used
by the inet family implementation (and internally by the REJECT target).
Check for the icmp(6) type and do not respond if its an unreachable error.
Without this, something like 'ip protocol icmp reject', when used
in a netdev chain attached to 'lo', cause a packet loop.
Same for two hosts that both use such a rule: each error packet
will be replied to.
Such situation persist until the (bogus) rule is amended to ratelimit or
checks the icmp type before the reject statement.
As the inet versions don't do this make the netdev ones follow along.
To ensure the proper functioning of the jump_label test module, this patch
adds support for the R_OR1K_32_PCREL relocation type for any modules. The
implementation calculates the PC-relative offset by subtracting the
instruction location from the target value and stores the result at the
specified location.
The test always returns success even if some tests were modified to
fail. Fix by converting the test to use the appropriate library
functions instead of using its own functions.
Change "ret" from u8 to int type in redrat3_enable_detector() to store
negative error codes or zero returned by redrat3_send_cmd() and
usb_submit_urb() - this better aligns with the coding standards and
maintains code consistency.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
fcnal-test.sh already includes lib.sh, use relevant helpers
instead of sleeping. Replace sleep after starting nettest
as a server with wait_local_port_listen.
The upstream mesa copy of the GPU regs has shifted more things to reg64
instead of seperate 32b HI/LO reg32's. This works better with the "new-
style" c++ builders that mesa has been migrating to for a6xx+ (to better
handle register shuffling between gens), but it leaves the C builders
with missing _HI/LO builders.
So handle the special case of reg64, automatically generating the
missing _HI/LO builders.
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/673559/ Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver for the Rockchip MIPI CSI-2 DPHY uses GRF register offset
value 0 to sort out undefined registers. However, the RK3588 CSIDPHY GRF
this offset is perfectly fine (in fact, register 0 is the only one in
this register file).
Introduce a boolean variable to indicate valid registers and allow writes
to register 0.
When compiled without CONFIG_VIDEO the architecture specific
implementations of video_is_primary_device() include prototypes and
assume that video-common.c will be linked. Guard against this so that the
fallback inline implementation that returns false will be used when
compiled without CONFIG_VIDEO.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202506221312.49Fy1aNA-lkp@intel.com/ Link: https://lore.kernel.org/r/20250811162606.587759-2-superm1@kernel.org Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Enable support for data lane rates between 80-160 Mbps cdns dphy
as mentioned in TRM [0] by setting the pll_opdiv field to 16.
This change enables lower resolutions like 640x480 at 60Hz.
[0]: https://www.ti.com/lit/zip/spruil1
(Table 12-552. DPHY_TX_PLL_CTRL Register Field Descriptions)
Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()")
requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/
S_IFIFO/S_IFSOCK type, use S_IFREG for $Extend records.
Disable auto-hibern8 during power mode transitions to prevent unintended
entry into auto-hibern8. Restore the original auto-hibern8 timer value
after completing the power mode change to maintain system stability and
prevent potential issues during power state transitions.
Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Refine the system power management (PM) flow by skipping low power mode
(LPM) and MTCMOS settings if runtime PM is already applied. Prevent
redundant operations to ensure a more efficient PM process.
Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 88e1510 PHY has an erratum where the phy downshift counter is not
cleared after phy being suspended(BMCR_PDOWN set) and then later
resumed(BMCR_PDOWN cleared). This can cause the gigabit link to
intermittently downshift to a lower speed.
Disabling and re-enabling the downshift feature clears the counter,
allowing the PHY to retry gigabit link negotiation up to the programmed
retry count times before downshifting. This behavior has been observed
on copper links.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com> Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20250906-marvell_fix-v2-1-f6efb286937f@altera.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Improve the recovery process for hibernation exit failures. Trigger the
error handler and break the suspend operation to ensure effective
recovery from hibernation errors. Activate the error handling mechanism
by ufshcd_force_error_recovery and scheduling the error handler work.
Signed-off-by: Peter Wang <peter.wang@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Resolve the issue of unbalanced IRQ enablement by setting the
'is_mcq_intr_enabled' flag after the first successful IRQ enablement.
Ensure proper tracking of the IRQ state and prevent potential mismatches
in IRQ handling.
Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Improve the recovery process for failed resume operations. Log the
device's power status and return 0 if both resume and recovery fail to
prevent I/O hang.
Signed-off-by: Peter Wang <peter.wang@mediatek.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When many ADD_ADDR need to be sent, it can take some time to send each
of them, and create new subflows. Some CIs seem to occasionally have
issues with these tests, especially with "debug" kernels.
Two subtests will now run for a slightly longer time: the last two where
3 or more ADD_ADDR are sent during the test.
The OmniVision OG01A1B image sensor is a monochrome sensor, it supports
8-bit and 10-bit RAW output formats only.
That said the planar greyscale Y8/Y10 media formats are more appropriate
for the sensor instead of the originally and arbitrary selected SGRBG one,
since there is no red, green or blue color components.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The datasheet of ov08x40 doesn't match the hardware behavior.
0x3821[2] == 1 is the original state and 0 the horizontal flip enabled.
Signed-off-by: Hao Yao <hao.yao@intel.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Tested-by: Hans de Goede <hansg@kernel.org> # ThinkPad X1 Carbon Gen 12 & Gen 13 Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the test allocates BAR sizes according to fixed table bar_size.
This does not work with controllers which have fixed size BARs that are
smaller than the requested BAR size. One such controller is Renesas R-Car
V4H PCIe controller, which has BAR4 size limited to 256 bytes, which is
much less than one of the BAR size, 131072 currently requested by this
test. A lot of controllers drivers in-tree have fixed size BARs, and they
do work perfectly fine, but it is only because their fixed size is larger
than the size requested by pci-epf-test.c
Adjust the test such that in case a fixed size BAR is detected, the fixed
BAR size is used, as that is the only possible option.
This helps with test failures reported as follows:
pci_epf_test pci_epf_test.0: requested BAR size is larger than fixed size
pci_epf_test pci_epf_test.0: Failed to allocate space for BAR4
Currently, misc_deregister() uses list_del() to remove the device
from the list. After list_del(), the list pointers are set to
LIST_POISON1 and LIST_POISON2, which may help catch use-after-free bugs,
but does not reset the list head.
If misc_deregister() is called more than once on the same device,
list_empty() will not return true, and list_del() may be called again,
leading to undefined behavior.
Replace list_del() with list_del_init() to reinitialize the list head
after deletion. This makes the code more robust against double
deregistration and allows safe usage of list_empty() on the miscdevice
after deregistration.
[ Note, this seems to keep broken out-of-tree drivers from doing foolish
things. While this does not matter for any in-kernel drivers,
external drivers could use a bit of help to show them they shouldn't
be doing stuff like re-registering misc devices - gregkh ]
In vt_ioctl(), the handler for VT_RESIZE always returns 0, which prevents
users from detecting errors. Add the missing return value so that errors
can be properly reported to users like vt_resizex().
In the __cdnsp_gadget_init() and cdnsp_gadget_exit() functions, the gadget
structure (pdev->gadget) was freed before its endpoints.
The endpoints are linked via the ep_list in the gadget structure.
Freeing the gadget first leaves dangling pointers in the endpoint list.
When the endpoints are subsequently freed, this results in a use-after-free.
Fix:
By separating the usb_del_gadget_udc() operation into distinct "del" and
"put" steps, cdnsp_gadget_free_endpoints() can be executed prior to the
final release of the gadget structure with usb_put_gadget().
A patch similar to bb9c74a5bd14("usb: dwc3: gadget: Free gadget structure
only after freeing endpoints").
Set the hid req->zero flag of ep0/in_ep to true by default,
then the UDC drivers can transfer a zero length packet at
the end if the hid transfer with size divisible to EPs max
packet size according to the USB 2.0 spec.
The "usxgmii" phy-mode that the Felix switch ports support on LS1028A is
not quite USXGMII, it is defined by the USXGMII multiport specification
document as 10G-QXGMII. It uses the same signaling as USXGMII, but it
multiplexes 4 ports over the link, resulting in a maximum speed of 2.5G
per port.
This change is needed in preparation for the lynx-10g SerDes driver on
LS1028A, which will make a more clear distinction between usxgmii
(supported on lane 0) and 10g-qxgmii (supported on lane 1). These
protocols have their configuration in different PCCR registers (PCCRB vs
PCCR9).
Continue parsing and supporting single-port-per-lane USXGMII when found
in the device tree as usual (because it works), but add support for
10G-QXGMII too. Using phy-mode = "10g-qxgmii" will be required when
modifying the device trees to specify a "phys" phandle to the SerDes
lane. The result when the "phys" phandle is present but the phy-mode is
wrong is undefined.
The only PHY driver in known use with this phy-mode, AQR412C, will gain
logic to transition from "usxgmii" to "10g-qxgmii" in a future change.
Prepare the driver by also setting PHY_INTERFACE_MODE_10G_QXGMII in
supported_interfaces when PHY_INTERFACE_MODE_USXGMII is there, to
prevent breakage with existing device trees.
[Why]
dm_mst_get_pbn_divider() returns value integer coming from
the cast from fixed point, but the casted integer will then be used
in dfixed_const to be multiplied by 4096. The cast from fixed point to integer
causes the calculation error becomes bigger when multiplied by 4096.
That makes the calculated pbn_div value becomes smaller than
it should be, which leads to the req_slot number becomes bigger.
Such error is getting reflected in 8k30 timing,
where the correct and incorrect calculated req_slot 62.9 Vs 63.1.
That makes the wrong calculation failed to light up 8k30
after a dock under HBR3 x 4.
[How]
Restore the accuracy by keeping the fraction part
calculated for the left shift operation.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com> Signed-off-by: Wayne Lin <wayne.lin@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since SEV or SNP may already be initialized in the previous kernel,
attempting to initialize them again in the kdump kernel can result
in SNP initialization failures, which in turn lead to IOMMU
initialization failures. Moreover, SNP/SEV guests are not run under a
kdump kernel, so there is no need to initialize SEV or SNP during
kdump boot.
After a panic if SNP is enabled in the previous kernel then the kdump
kernel boots with IOMMU SNP enforcement still enabled.
IOMMU command buffers and event buffer registers remain locked and
exclusive to the previous kernel. Attempts to enable command and event
buffers in the kdump kernel will fail, as hardware ignores writes to
the locked MMIO registers as per AMD IOMMU spec Section 2.12.2.1.
Skip enabling command buffers and event buffers for kdump boot as they
are already enabled in the previous kernel.
After analysis, it appears this is because of the cond_resched()
call from __release_sock().
When current thread is yielding, while still holding the TCP socket lock,
it might regain the cpu after a very long time.
Other peer TLP/RTO is firing (multiple times) and packets are retransmit,
while the initial copy is waiting in the socket backlog or receive queue.
In this patch, I call cond_resched() only once every 16 packets.
Modern TCP stack now spends less time per packet in the backlog,
especially because ACK are no longer sent (commit 133c4c0d3717
"tcp: defer regular ACK while processing socket backlog")
The GuC communication protocol allows GuC to send NO_RESPONSE_RETRY
reply message to indicate that due to some interim condition it can
not handle incoming H2G request and the host shall resend it.
But in some cases, due to errors, this unsatisfied condition might
be final and this could lead to endless retries as it was recently
seen on the CI:
To avoid such dangerous loops allow only limited number of retries
(for now 50) and add some delays (n * 5ms) to slow down the rate of
resending this repeated request.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Stuart Summers <stuart.summers@intel.com> Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com> Link: https://lore.kernel.org/r/20250903223330.6408-1-michal.wajdeczko@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When the 3.3Vaux supply is present, fetch it at the probe time and keep it
enabled for the entire PCIe controller lifecycle so that the link can enter
L2 state and the devices can signal wakeup using either Beacon or WAKE#
mechanisms.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
[mani: reworded the subject, description and error message] Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250820022328.2143374-1-hongxing.zhu@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, when adding the 6 GHz Band Capabilities element, the channel
list of the wiphy is checked to determine if 6 GHz is supported for a given
virtual interface. However, in a multi-radio wiphy (e.g., one that has
both lower bands and 6 GHz combined), the wiphy advertises support for
all bands. As a result, the 6 GHz Band Capabilities element is incorrectly
included in mesh beacon and station's association request frames of
interfaces operating in lower bands, without verifying whether the
interface is actually operating in a 6 GHz channel.
Fix this by verifying if the interface operates on 6 GHz channel
before adding the element. Note that this check cannot be placed
directly in ieee80211_put_he_6ghz_cap() as the same function is used to
add probe request elements while initiating scan in which case the
interface may not be operating in any band's channel.
Call the dedicated v4l2_disable_ioctl helper instead of manually
checking whether the current context is an encoder for the selection
api ioctls.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The .querystd callback should not program the device with the detected
standard, it should only report the standard to user-space. User-space
may then use .s_std to set the standard, if it wants to use it.
All that is required of .querystd is to setup the auto detection of
standards and report its findings.
While at it add some documentation on why this can't happen while
streaming and improve the error handling using a scoped guard.
The .set_fmt callback should not write the new format directly do the
device, it should only store it and have it applied by .s_stream.
The .s_stream callback already calls adv7180_set_field_mode() so it's
safe to remove programming of the device and just store the format and
have .s_stream apply it.
The adv7180_set_power() utilizes adv7180_write() which in turn requires
the state mutex to be held, take it before calling adv7180_set_power()
to avoid tripping a lockdep_assert_held().
projects / thirdparty / kernel / stable.git / log
