Increase the size of led_names so it can fit any valid v4l2 device name.
Fixes:
drivers/media/radio/radio-shark2.c:197:17: warning: ‘%s’ directive output may be truncated writing up to 35 bytes into a region of size 32 [-Wformat-truncation=]
Building with W=1 shows that a couple of variables in this driver are only
used in certain configurations:
drivers/video/fbdev/sis/init301.c:239:28: error: 'SiS_Part2CLVX_6' defined but not used [-Werror=unused-const-variable=]
239 | static const unsigned char SiS_Part2CLVX_6[] = { /* 1080i */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:230:28: error: 'SiS_Part2CLVX_5' defined but not used [-Werror=unused-const-variable=]
230 | static const unsigned char SiS_Part2CLVX_5[] = { /* 750p */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:211:28: error: 'SiS_Part2CLVX_4' defined but not used [-Werror=unused-const-variable=]
211 | static const unsigned char SiS_Part2CLVX_4[] = { /* PAL */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:192:28: error: 'SiS_Part2CLVX_3' defined but not used [-Werror=unused-const-variable=]
192 | static const unsigned char SiS_Part2CLVX_3[] = { /* NTSC, 525i, 525p */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:184:28: error: 'SiS_Part2CLVX_2' defined but not used [-Werror=unused-const-variable=]
184 | static const unsigned char SiS_Part2CLVX_2[] = {
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:176:28: error: 'SiS_Part2CLVX_1' defined but not used [-Werror=unused-const-variable=]
176 | static const unsigned char SiS_Part2CLVX_1[] = {
| ^~~~~~~~~~~~~~~
This started showing up after the definitions were moved into the
source file from the header, which was not flagged by the compiler.
Move the definition into the appropriate #ifdef block that already
exists next to them.
vmpic_msi_feature is only used conditionally, which triggers a rare
-Werror=unused-const-variable= warning with gcc:
arch/powerpc/sysdev/fsl_msi.c:567:37: error: 'vmpic_msi_feature' defined but not used [-Werror=unused-const-variable=]
567 | static const struct fsl_msi_feature vmpic_msi_feature =
Hide this one in the same #ifdef as the reference so we can turn on
the warning by default.
Fixes: 305bcf26128e ("powerpc/fsl-soc: use CONFIG_EPAPR_PARAVIRT for hcalls") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240403080702.3509288-2-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a check to mtk_drm_gem_init if we attempt to allocate a GEM object
of 0 bytes. Currently, no such check exists and the kernel will panic if
a userspace application attempts to allocate a 0x0 GBM buffer.
Tested by attempting to allocate a 0x0 GBM buffer on an MT8188 and
verifying that we now return EINVAL.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Justin Green <greenjustin@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: CK Hu <ck.hu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20240307180051.4104425-1-greenjustin@chromium.org/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The name of the overlay does not fit into the fixed-length field:
drivers/video/fbdev/sh_mobile_lcdcfb.c:1577:2: error: 'snprintf' will always be truncated; specified size is 16, but format string expands to at least 25
The function hynix_nand_rr_init() should probably return an error code.
Judging by the usage, it seems that the return code is passed up
the call stack.
Right now, it always returns 0 and the function hynix_nand_cleanup()
in hynix_nand_init() has never been called.
Found by RASU JSC and Linux Verification Center (linuxtesting.org)
Topology files that are propagated to the world and utilized by the
skylake-driver carry shortcomings in their SectionGraphs.
Since commit daa480bde6b3 ("ASoC: soc-core: tidyup for
snd_soc_dapm_add_routes()") route checks are no longer permissive. Probe
failures for Intel boards have been partially addressed by commit a22ae72b86a4 ("ASoC: soc-core: disable route checks for legacy devices")
and its follow up but only skl_nau88l25_ssm4567.c is patched. Fix the
problem for the rest of the boards.
Fixes index out of bounds issue in the color transformation function.
The issue could occur when the index 'i' exceeds the number of transfer
function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, an error message is
logged and the function returns false to indicate an error.
When printk-indexing is enabled, each dev_printk() invocation emits a
pi_entry structure. This is even true when the dev_printk() is
protected by an always-false check, as is typically the case for debug
messages: while the actual code to print the message is optimized out by
the compiler, the pi_entry structure is still emitted.
Avoid emitting pi_entry structures for unavailable dev_printk() kernel
messages by:
1. Introducing a dev_no_printk() helper, mimicked after the existing
no_printk() helper, which calls _dev_printk() instead of
dev_printk(),
2. Replacing all "if (0) dev_printk(...)" constructs by calls to the
new helper.
This reduces the size of an arm64 defconfig kernel with
CONFIG_PRINTK_INDEX=y by 957 KiB.
Fixes: ad7d61f159db7397 ("printk: index: Add indexing support to dev_printk") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Chris Down <chris@chrisdown.name> Reviewed-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/8583d54f1687c801c6cda8edddf2cf0344c6e883.1709127473.git.geert+renesas@glider.be Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When printk-indexing is enabled, each printk() invocation emits a
pi_entry structure, containing the format string and other information
related to its location in the kernel sources. This is even true for
no_printk(): while the actual code to print the message is optimized out
by the compiler due to the always-false check, the pi_entry structure is
still emitted.
As the main purpose of no_printk() is to provide a helper to maintain
printf()-style format checking when debugging is disabled, this leads to
the inclusion in the index of lots of printk formats that cannot be
emitted by the current kernel.
Fix this by switching no_printk() from printk() to _printk().
This reduces the size of an arm64 defconfig kernel with
CONFIG_PRINTK_INDEX=y by 576 KiB.
Fixes: 337015573718b161 ("printk: Userspace format indexing support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Chris Down <chris@chrisdown.name> Reviewed-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/56cf92edccffea970e1f40a075334dd6cf5bb2a4.1709127473.git.geert+renesas@glider.be Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
SO_KEEPALIVE support has to be set on each subflow: on each TCP socket,
where sk_prot->keepalive is defined. Technically, nothing has to be done
on the MPTCP socket. That's why mptcp_sol_socket_sync_intval() was
called instead of mptcp_sol_socket_intval().
Except that when nothing is done on the MPTCP socket, the
getsockopt(SO_KEEPALIVE), handled in net/core/sock.c:sk_getsockopt(),
will not know if SO_KEEPALIVE has been set on the different subflows or
not.
The fix is simple: simply call mptcp_sol_socket_intval() which will end
up calling net/core/sock.c:sk_setsockopt() where the SOCK_KEEPOPEN flag
will be set, the one used in sk_getsockopt().
So now, getsockopt(SO_KEEPALIVE) on an MPTCP socket will return the same
value as the one previously set with setsockopt(SO_KEEPALIVE).
Fixes: 1b3e7ede1365 ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20240514011335.176158-2-martineau@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
BPF_ATOMIC_OP() macro documentation states that "BPF_ADD | BPF_FETCH"
should be the same as atomic_fetch_add(), which is currently not the
case on s390x: the serialization instruction "bcr 14,0" is missing.
This applies to "and", "or" and "xor" variants too.
s390x is allowed to reorder stores with subsequent fetches from
different addresses, so code relying on BPF_FETCH acting as a barrier,
for example:
stw [%r0], 1
afadd [%r1], %r2
ldxw %r3, [%r4]
may be broken. Fix it by emitting "bcr 14,0".
Note that a separate serialization instruction is not needed for
BPF_XCHG and BPF_CMPXCHG, because COMPARE AND SWAP performs
serialization itself.
Fix use after free when FW completion arrives while device is in
internal error state. Avoid calling completion handler in this case,
since the device will flush the command interface and trigger all
completions manually.
The error path of seg6_init() is wrong in case CONFIG_IPV6_SEG6_LWTUNNEL
is not defined. In that case if seg6_hmac_init() fails, the
genl_unregister_family() isn't called.
This issue exist since commit 46738b1317e1 ("ipv6: sr: add option to control
lwtunnel support"), and commit 5559cea2d5aa ("ipv6: sr: fix possible
use-after-free and null-ptr-deref") replaced unregister_pernet_subsys()
with genl_unregister_family() in this error path.
Fixes: 46738b1317e1 ("ipv6: sr: add option to control lwtunnel support") Reported-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240509131812.1662197-4-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and
null-ptr-deref") changed the register order in seg6_init(). But the
unregister order in seg6_exit() is not updated.
Fixes: 5559cea2d5aa ("ipv6: sr: fix possible use-after-free and null-ptr-deref") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240509131812.1662197-3-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
OVS_PACKET_CMD_EXECUTE has 3 main attributes:
- OVS_PACKET_ATTR_KEY - Packet metadata in a netlink format.
- OVS_PACKET_ATTR_PACKET - Binary packet content.
- OVS_PACKET_ATTR_ACTIONS - Actions to execute on the packet.
OVS_PACKET_ATTR_KEY is parsed first to populate sw_flow_key structure
with the metadata like conntrack state, input port, recirculation id,
etc. Then the packet itself gets parsed to populate the rest of the
keys from the packet headers.
Whenever the packet parsing code starts parsing the ICMPv6 header, it
first zeroes out fields in the key corresponding to Neighbor Discovery
information even if it is not an ND packet.
It is an 'ipv6.nd' field. However, the 'ipv6' is a union that shares
the space between 'nd' and 'ct_orig' that holds the original tuple
conntrack metadata parsed from the OVS_PACKET_ATTR_KEY.
ND packets should not normally have conntrack state, so it's fine to
share the space, but normal ICMPv6 Echo packets or maybe other types of
ICMPv6 can have the state attached and it should not be overwritten.
The issue results in all but the last 4 bytes of the destination
address being wiped from the original conntrack tuple leading to
incorrect packet matching and potentially executing wrong actions
in case this packet recirculates within the datapath or goes back
to userspace.
ND fields should not be accessed in non-ND packets, so not clearing
them should be fine. Executing memset() only for actual ND packets to
avoid the issue.
Initializing the whole thing before parsing is needed because ND packet
may not contain all the options.
The issue only affects the OVS_PACKET_CMD_EXECUTE path and doesn't
affect packets entering OVS datapath from network interfaces, because
in this case CT metadata is populated from skb after the packet is
already parsed.
Fixes: 9dd7f8907c37 ("openvswitch: Add original direction conntrack tuple to sw_flow_key.") Reported-by: Antonin Bas <antonin.bas@broadcom.com> Closes: https://github.com/openvswitch/ovs-issues/issues/327 Signed-off-by: Ilya Maximets <i.maximets@ovn.org> Acked-by: Aaron Conole <aconole@redhat.com> Acked-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/20240509094228.1035477-1-i.maximets@ovn.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some usb drivers try to set small skb->truesize and break
core networking stacks.
In this patch, I removed one of the skb->truesize override.
I also replaced one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize
in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a:
stop lying about skb->truesize")
v3: also fix a sparse error ( https://lore.kernel.org/oe-kbuild-all/202405091310.KvncIecx-lkp@intel.com/ )
v2: leave the skb_trim() game because smsc95xx_rx_csum_offload()
needs the csum part. (Jakub)
While we are it, use get_unaligned() in smsc95xx_rx_csum_offload().
Fixes: 2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: UNGLinuxDriver@microchip.com Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509083313.2113832-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A data-race condition has been identified in af_unix. In one data path,
the write function unix_release_sock() atomically writes to
sk->sk_shutdown using WRITE_ONCE. However, on the reader side,
unix_stream_sendmsg() does not read it atomically. Consequently, this
issue is causing the following KCSAN splat to occur:
BUG: KCSAN: data-race in unix_release_sock / unix_stream_sendmsg
write (marked) to 0xffff88867256ddbb of 1 bytes by task 7270 on cpu 28:
unix_release_sock (net/unix/af_unix.c:640)
unix_release (net/unix/af_unix.c:1050)
sock_close (net/socket.c:659 net/socket.c:1421)
__fput (fs/file_table.c:422)
__fput_sync (fs/file_table.c:508)
__se_sys_close (fs/open.c:1559 fs/open.c:1541)
__x64_sys_close (fs/open.c:1541)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
read to 0xffff88867256ddbb of 1 bytes by task 989 on cpu 14:
unix_stream_sendmsg (net/unix/af_unix.c:2273)
__sock_sendmsg (net/socket.c:730 net/socket.c:745)
____sys_sendmsg (net/socket.c:2584)
__sys_sendmmsg (net/socket.c:2638 net/socket.c:2724)
__x64_sys_sendmmsg (net/socket.c:2753 net/socket.c:2750 net/socket.c:2750)
x64_sys_call (arch/x86/entry/syscall_64.c:33)
do_syscall_64 (arch/x86/entry/common.c:?)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
value changed: 0x01 -> 0x03
The line numbers are related to commit dd5a440a31fa ("Linux 6.9-rc7").
Commit e1d09c2c2f57 ("af_unix: Fix data races around sk->sk_shutdown.")
addressed a comparable issue in the past regarding sk->sk_shutdown.
However, it overlooked resolving this particular data path.
This patch only offending unix_stream_sendmsg() function, since the
other reads seem to be protected by unix_state_lock() as discussed in Link: https://lore.kernel.org/all/20240508173324.53565-1-kuniyu@amazon.com/ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240509081459.2807828-1-leitao@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This fixes a probably long standing problem in the Cortina
Gemini ethernet driver: there are some paths in the code
where the IRQ registers are written without taking the proper
locks.
Fixes: 4d5ae32f5e1e ("net: ethernet: Add a driver for Gemini gigabit ethernet") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240509-gemini-ethernet-locking-v1-1-afd00a528b95@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (gem_start_xmit+0x0/0x398)
WARNING: CPU: 1 PID: 1 at net/core/netpoll.c:370 netpoll_send_skb+0x1fc/0x20c
gem_poll_controller() disables interrupts, which may sleep.
We can't sleep in netpoll, it has interrupts disabled completely.
Strangely, gem_poll_controller() doesn't even poll the completions,
and instead acts as if an interrupt has fired so it just schedules
NAPI and exits. None of this has been necessary for years, since
netpoll invokes NAPI directly.
In IPv6, ipv6_rcv_core will parse the hop-by-hop type extension header and increase skb->transport_header by one extension header length.
But if there are more other extension headers like fragment header at this time, the skb->transport_header points to the second extension header,
not the transport layer header or the first extension header.
This will result in the start and nexthdrp variable not pointing to the same position in ipv6frag_thdr_trunced,
and ipv6_skip_exthdr returning incorrect offset and frag_off.Sometimes,the length of the last sharded packet is smaller than the calculated incorrect offset, resulting in packet loss.
We can use network header to offset and calculate the correct position to solve this problem.
Fixes: 9d9e937b1c8b (ipv6/netfilter: Discard first fragment not including all headers) Signed-off-by: Gao Xingwang <gaoxingwang1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Calling mac_reset() on a Mac IIci does reset the system, but what
follows is a POST failure that requires a manual reset to resolve.
Avoid that by using the 68030 asm implementation instead of the C
implementation.
Apparently the SE/30 has a similar problem as it has used the asm
implementation since before git. This patch extends that solution to
other systems with a similar ROM.
After this patch, the only systems still using the C implementation are
68040 systems where adb_type is either MAC_ADB_IOP or MAC_ADB_II. This
implies a 1 MiB Quadra ROM.
This now includes the Quadra 900/950, which previously fell through to
the "should never get here" catch-all.
Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@linux-m68k.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/480ebd1249d229c6dc1f3f1c6d599b8505483fd8.1714797072.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Context switching does take care to retain the correct lock owner across
the switch from 'prev' to 'next' tasks. This does rely on interrupts
remaining disabled for the entire duration of the switch.
This condition is guaranteed for normal process creation and context
switching between already running processes, because both 'prev' and
'next' already have interrupts disabled in their saved copies of the
status register.
The situation is different for newly created kernel threads. The status
register is set to PS_S in copy_thread(), which does leave the IPL at 0.
Upon restoring the 'next' thread's status register in switch_to() aka
resume(), interrupts then become enabled prematurely. resume() then
returns via ret_from_kernel_thread() and schedule_tail() where run queue
lock is released (see finish_task_switch() and finish_lock_switch()).
A timer interrupt calling scheduler_tick() before the lock is released
in finish_task_switch() will find the lock already taken, with the
current task as lock owner. This causes a spinlock recursion warning as
reported by Guenter Roeck.
As far as I can ascertain, this race has been opened in commit 533e6903bea0 ("m68k: split ret_from_fork(), simplify kernel_thread()")
but I haven't done a detailed study of kernel history so it may well
predate that commit.
Interrupts cannot be disabled in the saved status register copy for
kernel threads (init will complain about interrupts disabled when
finally starting user space). Disable interrupts temporarily when
switching the tasks' register sets in resume().
Note that a simple oriw 0x700,%sr after restoring sr is not enough here
- this leaves enough of a race for the 'spinlock recursion' warning to
still be observed.
Some usb drivers set small skb->truesize and break
core networking stacks.
In this patch, I removed one of the skb->truesize override.
I also replaced one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize
in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a:
stop lying about skb->truesize")
Fixes: c9b37458e956 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240506143939.3673865-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some usb drivers try to set small skb->truesize and break
core networking stacks.
I replace one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize
in rx path") and 4ce62d5b2f7a ("net: usb: ax88179_178a:
stop lying about skb->truesize")
Fixes: 361459cd9642 ("net: usb: aqc111: Implement RX data path") Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240506135546.3641185-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This loop is supposed to copy the mac address to cmd->addr but the
i++ increment is missing so it copies everything to cmd->addr[0] and
only the last address is recorded.
Fixes: 22bedad3ce11 ("net: convert multicast list to list_head") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/b788be9a-15f5-4cca-a3fe-79df4c8ce7b2@moroto.mountain Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, we allocate a count-sized kernel buffer and copy count from
userspace to that buffer. Later, we use kstrtouint on this buffer but we
don't ensure that the string is terminated inside the buffer, this can
lead to OOB read when using kstrtouint. Fix this issue by using
memdup_user_nul instead of memdup_user.
Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from
userspace to that buffer. Later, we use sscanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using sscanf. Fix this issue by using memdup_user_nul instead
of memdup_user.
Fixes: 9f30b674759b ("bfa: replace 2 kzalloc/copy_from_user by memdup_user") Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-3-f1f1b53a10f4@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
Fix this by using selftests/lib.mk facilities for tracking local header
file dependencies: add them to LOCAL_HDRS, leaving only the .c files to
be passed to the compiler.
First of all, in order to build with clang at all, one must first apply
Valentin Obst's build fix for LLVM [1]. Once that is done, then when
building with clang, via:
make LLVM=1 -C tools/testing/selftests
...the following error occurs:
clang: error: cannot specify -o when generating multiple output files
This is because clang, unlike gcc, won't accept invocations of this
form:
clang file1.c header2.h
While trying to fix this, I noticed that:
a) selftests/lib.mk already avoids the problem, and
b) The binderfs Makefile indavertently bypasses the selftests/lib.mk
build system, and quitely uses Make's implicit build rules for .c files
instead.
The Makefile attempts to set up both a dependency and a source file,
neither of which was needed, because lib.mk is able to automatically
handle both. This line:
binderfs_test: binderfs_test.c
...causes Make's implicit rules to run, which builds binderfs_test
without ever looking at lib.mk.
Fix this by simply deleting the "binderfs_test:" Makefile target and
letting lib.mk handle it instead.
Fixes: 6e29225af902 ("binderfs: port tests to test harness infrastructure") Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit cadc4e1a2b4d ("sh: Handle calling csum_partial with misaligned
data") causes bad checksum calculations on unaligned data. Reverting
it fixes the problem.
# Subtest: checksum
# module: checksum_kunit
1..5
# test_csum_fixed_random_inputs: ASSERTION FAILED at lib/checksum_kunit.c:500
Expected ( u64)result == ( u64)expec, but
( u64)result == 53378 (0xd082)
( u64)expec == 33488 (0x82d0)
# test_csum_fixed_random_inputs: pass:0 fail:1 skip:0 total:1
not ok 1 test_csum_fixed_random_inputs
# test_csum_all_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:525
Expected ( u64)result == ( u64)expec, but
( u64)result == 65281 (0xff01)
( u64)expec == 65280 (0xff00)
# test_csum_all_carry_inputs: pass:0 fail:1 skip:0 total:1
not ok 2 test_csum_all_carry_inputs
# test_csum_no_carry_inputs: ASSERTION FAILED at lib/checksum_kunit.c:573
Expected ( u64)result == ( u64)expec, but
( u64)result == 65535 (0xffff)
( u64)expec == 65534 (0xfffe)
# test_csum_no_carry_inputs: pass:0 fail:1 skip:0 total:1
not ok 3 test_csum_no_carry_inputs
# test_ip_fast_csum: pass:1 fail:0 skip:0 total:1
ok 4 test_ip_fast_csum
# test_csum_ipv6_magic: pass:1 fail:0 skip:0 total:1
ok 5 test_csum_ipv6_magic
# checksum: pass:2 fail:3 skip:0 total:5
# Totals: pass:2 fail:3 skip:0 total:5
not ok 22 checksum
Fixes: cadc4e1a2b4d ("sh: Handle calling csum_partial with misaligned data") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Link: https://lore.kernel.org/r/20240324231804.841099-1-linux@roeck-us.net Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzkaller reports [1] hitting a warning which is caused by presence
of a wrong endpoint type at the URB sumbitting stage. While there
was a check for a specific 4th endpoint, since it can switch types
between bulk and interrupt, other endpoints are trusted implicitly.
Similar warning is triggered in a couple of other syzbot issues [2].
Fix the issue by doing a comprehensive check of all endpoints
taking into account difference between high- and full-speed
configuration.
The via-macii ADB driver calls request_irq() after disabling hard
interrupts. But disabling interrupts isn't necessary here because the
VIA shift register interrupt was masked during VIA1 initialization.
This came while reviewing commit c4e86b4363ac ("net: add two more
call_rcu_hurry()").
Paolo asked if adding one synchronize_rcu() would help.
While synchronize_rcu() does not help, making sure to call
rcu_barrier() before msleep(wait) is definitely helping
to make sure lazy call_rcu() are completed.
Instead of waiting ~100 seconds in my tests, the ref_tracker
splats occurs one time only, and netdev_wait_allrefs_any()
latency is reduced to the strict minimum.
Ideally we should audit our call_rcu() users to make sure
no refcount (or cascading call_rcu()) is held too long,
because rcu_barrier() is quite expensive.
Instead of of_clk_get_by_name() use devm_clk_get_prepared() which has
several advantages:
- Combines getting the clock and a call to clk_prepare(). The latter
can be dropped from sti_pwm_probe() accordingly.
- Cares for calling clk_put() which is missing in both probe's error
path and the remove function.
- Cares for calling clk_unprepare() which can be dropped from the error
paths and the remove function. (Note that not all error path got this
right.)
With additionally using devm_pwmchip_add() instead of pwmchip_add() the
remove callback can be dropped completely. With it the last user of
platform_get_drvdata() goes away and so platform_set_drvdata() can be
dropped from the probe function, too.
This prepares the driver for further changes that will drop struct
pwm_chip chip from struct sti_pwm_chip. Use the pwm_chip as driver data
instead of the sti_pwm_chip to get access to the pwm_chip in
sti_pwm_remove() without using pc->chip.
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
88E6250-family switches have the quirk that the EEPROM Running flag can
get stuck at 1 when no EEPROM is connected, causing
mv88e6xxx_g2_eeprom_wait() to time out. We still want to wait for the
EEPROM however, to avoid interrupting a transfer and leaving the EEPROM
in an invalid state.
The condition to wait for recommended by the hardware spec is the EEInt
flag, however this flag is cleared on read, so before the hardware reset,
is may have been cleared already even though the EEPROM has been read
successfully.
For this reason, we revive the mv88e6xxx_g1_wait_eeprom_done() function
that was removed in commit 6ccf50d4d474
("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent") in a
slightly refactored form, and introduce a new
mv88e6xxx_g1_wait_eeprom_done_prereset() that additionally handles this
case by triggering another EEPROM reload that can be waited on.
On other switch models without this quirk, mv88e6xxx_g2_eeprom_wait() is
kept, as it avoids the additional reload.
Fixes: 6ccf50d4d474 ("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of calling mv88e6xxx_g2_eeprom_wait() directly from
mv88e6xxx_hardware_reset(), add configurable pre- and post-reset hard
reset handlers. Initially, the handlers are set to
mv88e6xxx_g2_eeprom_wait() for all families that have get/set_eeprom()
to match the existing behavior. No functional change intended (except
for additional error messages on failure).
Fixes: 6ccf50d4d474 ("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/net/wireless/ath/ath10k/debugfs_sta.c:line 429, column 3
Value stored to 'ret' is never read.
Return 'ret' rather than 'count' when 'ret' stores an error code.
Fixes: ee8b08a1be82 ("ath10k: add debugfs support to get per peer tids log via tracing") Signed-off-by: Su Hui <suhui@nfschina.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240422034243.938962-1-suhui@nfschina.com Signed-off-by: Sasha Levin <sashal@kernel.org>
compute_intercept_slope() is called from calibrate_8960() (in tsens-8960.c)
as compute_intercept_slope(priv, p1, NULL, ONE_PT_CALIB) which lead to null
pointer dereference (if DEBUG or DYNAMIC_DEBUG set).
Fix this bug by adding null pointer check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfc1193d4dbd ("thermal/drivers/tsens: Replace custom 8960 apis with generic apis") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240411114021.12203-1-amishin@t-argos.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
On x86, the ordinary, position dependent small and kernel code models
only support placement of the executable in 32-bit addressable memory,
due to the use of 32-bit signed immediates to generate references to
global variables. For the kernel, this implies that all global variables
must reside in the top 2 GiB of the kernel virtual address space, where
the implicit address bits 63:32 are equal to sign bit 31.
This means the kernel code model is not suitable for other bare metal
executables such as the kexec purgatory, which can be placed arbitrarily
in the physical address space, where its address may no longer be
representable as a sign extended 32-bit quantity. For this reason,
commit
e16c2983fba0 ("x86/purgatory: Change compiler flags from -mcmodel=kernel to -mcmodel=large to fix kexec relocation errors")
switched to the large code model, which uses 64-bit immediates for all
symbol references, including function calls, in order to avoid relying
on any assumptions regarding proximity of symbols in the final
executable.
The large code model is rarely used, clunky and the least likely to
operate in a similar fashion when comparing GCC and Clang, so it is best
avoided. This is especially true now that Clang 18 has started to emit
executable code in two separate sections (.text and .ltext), which
triggers an issue in the kexec loading code at runtime.
The SUSE bugzilla fixes tag points to gcc 13 having issues with the
large model too and that perhaps the large model should simply not be
used at all.
Instead, use the position independent small code model, which makes no
assumptions about placement but only about proximity, where all
referenced symbols must be within -/+ 2 GiB, i.e., in range for a
RIP-relative reference. Use hidden visibility to suppress the use of a
GOT, which carries absolute addresses that are not covered by static ELF
relocations, and is therefore incompatible with the kexec loader's
relocation logic.
[ bp: Massage commit message. ]
Fixes: e16c2983fba0 ("x86/purgatory: Change compiler flags from -mcmodel=kernel to -mcmodel=large to fix kexec relocation errors") Fixes: https://bugzilla.suse.com/show_bug.cgi?id=1211853 Closes: https://github.com/ClangBuiltLinux/linux/issues/2016 Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/all/20240417-x86-fix-kexec-with-llvm-18-v1-0-5383121e8fb7@kernel.org/ Signed-off-by: Sasha Levin <sashal@kernel.org>
As of commit 7d1d86518118 ("[SCSI] libsas: fix false positive 'device
attached' conditions"), reset the phy->entacted_sas_addr address to a
zero-address when the link rate is less than 1.5G.
Currently we find that when a new device is attached, and the link rate is
less than 1.5G, but the device type is not NO_DEVICE, for example: the link
rate is SAS_PHY_RESET_IN_PROGRESS and the device type is stp. After setting
the phy->entacted_sas_addr address to the zero address, the port will
continue to be created for the phy with the zero-address, and other phys
with the zero-address will be tried to be added to the new port:
[562240.051197] sas: ex 500e004aaaaaaa1f phy19:U:0 attached: 0000000000000000 (no device)
// phy19 is deleted but still on the parent port's phy_list
[562240.062536] sas: ex 500e004aaaaaaa1f phy0 new device attached
[562240.062616] sas: ex 500e004aaaaaaa1f phy00:U:5 attached: 0000000000000000 (stp)
[562240.062680] port-7:7:0: trying to add phy phy-7:7:19 fails: it's already part of another port
Therefore, it should be the same as sas_get_phy_attached_dev(). Only when
device_type is SAS_PHY_UNUSED, sas_address is set to the 0 address.
Fixes: 7d1d86518118 ("[SCSI] libsas: fix false positive 'device attached' conditions") Signed-off-by: Xingui Yang <yangxingui@huawei.com> Link: https://lore.kernel.org/r/20240312141103.31358-5-yangxingui@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
cppc_cpufreq_get_rate() and hisi_cppc_cpufreq_get_rate() can be called from
different places with various parameters. So cpufreq_cpu_get() can return
null as 'policy' in some circumstances.
Fix this bug by adding null return check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a28b2bfc099c ("cppc_cpufreq: replace per-cpu data array with a list") Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We've observed a 7-12% performance regression in iperf3 UDP ipv4 and
ipv6 tests with multiple sockets on Zen3 cpus, which we traced back to
commit f0ea27e7bfe1 ("udp: re-score reuseport groups when connected
sockets are present"). The failing tests were those that would spawn
UDP sockets per-cpu on systems that have a high number of cpus.
Unsurprisingly, it is not caused by the extra re-scoring of the reused
socket, but due to the compiler no longer inlining compute_score, once
it has the extra call site in udp4_lib_lookup2. This is augmented by
the "Safe RET" mitigation for SRSO, needed in our Zen3 cpus.
We could just explicitly inline it, but compute_score() is quite a large
function, around 300b. Inlining in two sites would almost double
udp4_lib_lookup2, which is a silly thing to do just to workaround a
mitigation. Instead, this patch shuffles the code a bit to avoid the
multiple calls to compute_score. Since it is a static function used in
one spot, the compiler can safely fold it in, as it did before, without
increasing the text size.
With this patch applied I ran my original iperf3 testcases. The failing
cases all looked like this (ipv4):
iperf3 -c 127.0.0.1 --udp -4 -f K -b $R -l 8920 -t 30 -i 5 -P 64 -O 2
where $R is either 1G/10G/0 (max, unlimited). I ran 3 times each.
baseline is v6.9-rc3. harmean == harmonic mean; CV == coefficient of
variation.
This restores the performance we had before the change above with this
benchmark. We obviously don't expect any real impact when mitigations
are disabled, but just to be sure it also doesn't regresses:
Cc: Lorenz Bauer <lmb@isovalent.com> Fixes: f0ea27e7bfe1 ("udp: re-score reuseport groups when connected sockets are present") Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are currently four copies of reuseport_lookup: one each for
(TCP, UDP)x(IPv4, IPv6). This forces us to duplicate all callers of
those functions as well. This is already the case for sk_lookup
helpers (inet,inet6,udp4,udp6)_lookup_run_bpf.
There are two differences between the reuseport_lookup helpers:
1. They call different hash functions depending on protocol
2. UDP reuseport_lookup checks that sk_state != TCP_ESTABLISHED
Move the check for sk_state into the caller and use the INDIRECT_CALL
infrastructure to cut down the helpers to one per IP version.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-4-7021b683cdae@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: 50aee97d1511 ("udp: Avoid call to compute_score on multiple sites") Signed-off-by: Sasha Levin <sashal@kernel.org>
Rename the existing reuseport helpers for IPv4 and IPv6 so that they
can be invoked in the follow up commit. Export them so that building
DCCP and IPv6 as a module works.
No change in functionality.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-3-7021b683cdae@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Stable-dep-of: 50aee97d1511 ("udp: Avoid call to compute_score on multiple sites") Signed-off-by: Sasha Levin <sashal@kernel.org>
The exit() callback is optional and shouldn't be called without checking
a valid pointer first.
Also, we must clear freq_table pointer even if the exit() callback isn't
present.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Fixes: 91a12e91dc39 ("cpufreq: Allow light-weight tear down and bring up of CPUs") Fixes: f339f3541701 ("cpufreq: Rearrange locking in cpufreq_remove_dev()") Reported-by: Lizhe <sensor1010@163.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, cpufreq_remove_dev() invokes the ->exit() driver callback
without holding the policy rwsem which is inconsistent with what
happens if ->exit() is invoked directly from cpufreq_offline().
It also manipulates the real_cpus mask and removes the CPU device
symlink without holding the policy rwsem, but cpufreq_offline() holds
the rwsem around the modifications thereof.
For consistency, modify cpufreq_remove_dev() to hold the policy rwsem
until the ->exit() callback has been called (or it has been determined
that it is not necessary to call it).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: b8f85833c057 ("cpufreq: exit() callback is optional") Signed-off-by: Sasha Levin <sashal@kernel.org>
Split the "core" part running under the policy rwsem out of
cpufreq_offline() to allow the locking in cpufreq_remove_dev() to be
rearranged more easily.
As a side-effect this eliminates the unlock label that's not needed
any more.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Stable-dep-of: b8f85833c057 ("cpufreq: exit() callback is optional") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 3e11e53041502 tries to suppress dlm_lock() lock conversion errors
that occur when the lockspace has already been released.
It does that by setting and checking the SDF_SKIP_DLM_UNLOCK flag. This
conflicts with the intended meaning of the SDF_SKIP_DLM_UNLOCK flag, so
check whether the lockspace is still allocated instead.
(Given the current DLM API, checking for this kind of error after the
fact seems easier that than to make sure that the lockspace is still
allocated before calling dlm_lock(). Changing the DLM API so that users
maintain the lockspace references themselves would be an option.)
Fixes: 3e11e53041502 ("GFS2: ignore unlock failures after withdraw") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit fffe9bee14b0 ("gfs2: Delay withdraw from atomic context")
switched from gfs2_withdraw() to gfs2_withdraw_delayed() in
gfs2_ail_error(), but failed to then check if a delayed withdraw had
occurred. Fix that by adding the missing check in __gfs2_ail_flush(),
where the spin locks are already dropped and a withdraw is possible.
Fixes: fffe9bee14b0 ("gfs2: Delay withdraw from atomic context") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The code works as intended, and the warning could be addressed by using
a memcpy(), but turning the warning off for this file works equally well
and may be easier to merge.
Currently, the UIC_COMMAND_COMPL interrupt is disabled and a wmb() is used
to complete the register write before any following writes.
wmb() ensures the writes complete in that order, but completion doesn't
mean that it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read back
to force it to make it all the way to the device. This is documented in
device-io.rst and a talk by Will Deacon on this can be seen over here:
Let's do that to ensure the bit hits the device. Because the wmb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d75f7fe495cf ("scsi: ufs: reduce the interrupts for power mode change requests") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Can Guo <quic_cang@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-9-181252004586@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, interrupts are cleared and disabled prior to registering the
interrupt. An mb() is used to complete the clear/disable writes before the
interrupt is registered.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring these
bits have taken effect on the device is to perform a read back to force it
to make it all the way to the device. This is documented in device-io.rst
and a talk by Will Deacon on this can be seen over here:
Let's do that to ensure these bits hit the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: 199ef13cac7d ("scsi: ufs: avoid spurious UFS host controller interrupts") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-8-181252004586@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, HCLKDIV is written to and then completed with an mb().
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: d90996dae8e4 ("scsi: ufs: Add UFS platform driver for Cadence UFS") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-6-181252004586@redhat.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the CGC enable bit is written and then an mb() is used to ensure
that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Can Guo <quic_cang@quicinc.com> Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-5-181252004586@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the QUNIPRO_SEL bit is written to and then an mb() is used to
ensure that completes before continuing.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
But, there's really no reason to even ensure completion before
continuing. The only requirement here is that this write is ordered to this
endpoint (which readl()/writel() guarantees already). For that reason the
mb() can be dropped altogether without anything forcing completion.
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-4-181252004586@redhat.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On SM8550, depending on the Qunipro, we can run with G5 or G4. For now,
when the major version is 5 or above, we go with G5. Therefore, we need to
specifically tell UFS HC that.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 823150ecf04f ("scsi: ufs: qcom: Perform read back after writing unipro mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
On newer UFS revisions, the register at offset 0xD0 is called,
REG_UFS_PARAM0. Since the existing register, RETRY_TIMER_REG is not used
anywhere, it is safe to use the new name.
Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Asutosh Das <quic_asutoshd@quicinc.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> # Qdrive3/sa8540p-ride Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 823150ecf04f ("scsi: ufs: qcom: Perform read back after writing unipro mode") Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
that write has gone through to the device.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
Let's do that to ensure the bit hits the device. Because the mb()'s purpose
wasn't to add extra ordering (on top of the ordering guaranteed by
writel()/readl()), it can safely be removed.
Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations") Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-2-181252004586@redhat.com Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the reset bit for the UFS provided reset controller (used by its
phy) is written to, and then a mb() happens to try and ensure that hit the
device. Immediately afterwards a usleep_range() occurs.
mb() ensures that the write completes, but completion doesn't mean that it
isn't stored in a buffer somewhere. The recommendation for ensuring this
bit has taken effect on the device is to perform a read back to force it to
make it all the way to the device. This is documented in device-io.rst and
a talk by Will Deacon on this can be seen over here:
Let's do that to ensure the bit hits the device. By doing so and
guaranteeing the ordering against the immediately following usleep_range(),
the mb() can safely be removed.
Fixes: 81c0fc51b7a7 ("ufs-qcom: add support for Qualcomm Technologies Inc platforms") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Can Guo <quic_cang@quicinc.com> Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240329-ufs-reset-ensure-effect-before-delay-v5-1-181252004586@redhat.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The struct bpf_fib_lookup is supposed to be of size 64. A recent commit 59b418c7063d ("bpf: Add a check for struct bpf_fib_lookup size") added
a static assertion to check this property so that future changes to the
structure will not accidentally break this assumption.
As it immediately turned out, on some 32-bit arm systems, when AEABI=n,
the total size of the structure was equal to 68, see [1]. This happened
because the bpf_fib_lookup structure contains a union of two 16-bit
fields:
union {
__u16 tot_len;
__u16 mtu_result;
};
which was supposed to compile to a 16-bit-aligned 16-bit field. On the
aforementioned setups it was instead both aligned and padded to 32-bits.
Declare this inner union as __attribute__((packed, aligned(2))) such
that it always is of size 2 and is aligned to 16 bits.
clang complains that the temporary string for the name passed into
alloc_workqueue() is too short for its contents:
drivers/net/ethernet/qlogic/qed/qed_main.c:1218:3: error: 'snprintf' will always be truncated; specified size is 16, but format string expands to at least 18 [-Werror,-Wformat-truncation]
There is no need for a temporary buffer, and the actual name of a workqueue
is 32 bytes (WQ_NAME_LEN), so just use the interface as intended to avoid
the truncation.
root_domain::overutilized is only used for EAS(energy aware scheduler)
to decide whether to do load balance or not. It is not used if EAS
not possible.
Currently enqueue_task_fair and task_tick_fair accesses, sometime updates
this field. In update_sd_lb_stats it is updated often. This causes cache
contention due to true sharing and burns a lot of cycles. ::overload and
::overutilized are part of the same cacheline. Updating it often invalidates
the cacheline. That causes access to ::overload to slow down due to
false sharing. Hence add EAS check before accessing/updating this field.
EAS check is optimized at compile time or it is a static branch.
Hence it shouldn't cost much.
With the patch, both enqueue_task_fair and newidle_balance don't show
up as hot routines in perf profile.
aaa8736370db ("x86, relocs: Ignore relocations in .notes section")
... only started ignoring the .notes sections in print_absolute_relocs(),
but the same logic should also by applied in walk_relocs() to avoid
such relocations.
[ mingo: Fixed various typos in the changelog, removed extra curly braces from the code. ]
Currently host relies on CE interrupts to get notified that
the service ready message is ready. This results in timeout
issue if the interrupt is not fired, due to some unknown
reasons. See below logs:
[76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received
...
[76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110
And finally it causes WLAN interface bring up failure.
Change to give it one more chance here by polling CE rings,
before failing directly.
md_do_sync
j = mddev->resync_min
while (j < max_sectors)
sectors = raid10_sync_request(mddev, j, &skipped)
if (!md_bitmap_start_sync(..., &sync_blocks))
// md_bitmap_start_sync set sync_blocks to 0
return sync_blocks + sectors_skippe;
// sectors = 0;
j += sectors;
// j never change
Root cause is that commit 301867b1c168 ("md/raid10: check
slab-out-of-bounds in md_bitmap_get_counter") return early from
md_bitmap_get_counter(), without setting returned blocks.
Fix this problem by always set returned blocks from
md_bitmap_get_counter"(), as it used to be.
Noted that this patch just fix the softlockup problem in kernel, the
case that bitmap size doesn't match array size still need to be fixed.
Fixes: 301867b1c168 ("md/raid10: check slab-out-of-bounds in md_bitmap_get_counter") Reported-and-tested-by: Nigel Croxon <ncroxon@redhat.com> Closes: https://lore.kernel.org/all/71ba5272-ab07-43ba-8232-d2da642acb4e@redhat.com/ Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240422065824.2516-1-yukuai1@huaweicloud.com Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
For cmdq jump command, offset 0 means relative jump and offset 1
means absolute jump. cmdq_pkt_jump() is absolute jump, so fix the
typo of CMDQ_JUMP_RELATIVE in cmdq_pkt_jump().
Fixes: 946f1792d3d7 ("soc: mediatek: cmdq: add jump function") Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240222154120.16959-2-chunkuang.hu@kernel.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: aa98d7cf59b5 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)") Signed-off-by: Ilya Denisyev <dev@elkcl.ru> Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The subchannel-type field "st" of s390_cio_stsch and s390_cio_msch
tracepoints is incorrectly filled with the subchannel-enabled SCHIB
value "ena". Fix this by assigning the correct value.
Fixes: d1de8633d96a ("s390 cio: Rewrite trace point class s390_class_schib") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since sha512_transform_rorx() uses ymm registers, execute vzeroupper
before returning from it. This is necessary to avoid reducing the
performance of SSE code.
Fixes: e01d69cb0195 ("crypto: sha512 - Optimized SHA512 x86_64 assembly routine using AVX instructions.") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since sha256_transform_rorx() uses ymm registers, execute vzeroupper
before returning from it. This is necessary to avoid reducing the
performance of SSE code.
Fixes: d34a460092d8 ("crypto: sha256 - Optimized sha256 x86_64 routine using AVX2's RORX instructions") Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is not a useful configuration, and there is not much point in saving
a few bytes when only one of the two is enabled, so just remove all
these ifdef checks and rely on of_match_node() and acpi_match_device()
returning NULL when these subsystems are disabled.
__cmpxchg_u8() had been added (initially) for the sake of
drivers/phy/ti/phy-tusb1210.c; the thing is, that drivers is
modular, so we need an export
Fixes: b344d6a83d01 "parisc: add support for cmpxchg on u8 pointers" Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
clang-14 points out that v_size is always smaller than a 64KB
page size if that is configured by the CPU architecture:
fs/nilfs2/ioctl.c:63:19: error: result of comparison of constant 65536 with expression of type '__u16' (aka 'unsigned short') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (argv->v_size > PAGE_SIZE)
~~~~~~~~~~~~ ^ ~~~~~~~~~
This is ok, so just shut up that warning with a cast.
The 'TAG 66 Packet Format' description is missing the cipher code and
checksum fields that are packed into the message packet. As a result,
the buffer allocated for the packet is 3 bytes too small and
write_tag_66_packet() will write up to 3 bytes past the end of the
buffer.
Fix this by increasing the size of the allocation so the whole packet
will always fit in the buffer.
This fixes the below kasan slab-out-of-bounds bug:
BUG: KASAN: slab-out-of-bounds in ecryptfs_generate_key_packet_set+0x7d6/0xde0
Write of size 1 at addr ffff88800afbb2a5 by task touch/181
The buffer used to transfer data over the mailbox interface is mapped
using the client's device. This is incorrect, as the device performing
the DMA transfer is the mailbox itself. Fix it by using the mailbox
controller device instead.
This requires including the mailbox_controller.h header to dereference
the mbox_chan and mbox_controller structures. The header is not meant to
be included by clients. This could be fixed by extending the client API
with a function to access the controller's device.
Fixes: 4e3d60656a72 ("ARM: bcm2835: Add the Raspberry Pi firmware driver") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Stefan Wahren <wahrenst@gmx.net> Tested-by: Ivan T. Ivanov <iivanov@suse.de> Link: https://lore.kernel.org/r/20240326195807.15163-3-laurent.pinchart@ideasonboard.com Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In spu2_dump_omd() value of ptr is increased by ciph_key_len
instead of hash_iv_len which could lead to going beyond the
buffer boundaries.
Fix this bug by changing ciph_key_len to hash_iv_len.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
The original mount API conversion inexplicably left out the change
from ->remount_fs to ->reconfigure; do that now.
Fixes: 7ab2fa7693c3 ("vfs: Convert openpromfs to use the new mount API") Signed-off-by: Eric Sandeen <sandeen@redhat.com> Link: https://lore.kernel.org/r/90b968aa-c979-420f-ba37-5acc3391b28f@redhat.com Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
epoll can call out to vfs_poll() with a file pointer that may race with
the last 'fput()'. That would make f_count go down to zero, and while
the ep->mtx locking means that the resulting file pointer tear-down will
be blocked until the poll returns, it means that f_count is already
dead, and any use of it won't actually get a reference to the file any
more: it's dead regardless.
Make sure we have a valid ref on the file pointer before we call down to
vfs_poll() from the epoll routines.
projects / thirdparty / kernel / stable.git / log
