On ELF, (NOLOAD) sets the section type to SHT_NOBITS[1]. It is conceptually
inappropriate for .plt and .text.* sections which are always
SHT_PROGBITS.
In GNU ld, if PLT entries are needed, .plt will be SHT_PROGBITS anyway
and (NOLOAD) will be essentially ignored. In ld.lld, since
https://reviews.llvm.org/D118840 ("[ELF] Support (TYPE=<value>) to
customize the output section type"), ld.lld will report a `section type
mismatch` error. Just remove (NOLOAD) to fix the error.
[1] https://lld.llvm.org/ELF/linker_script.html As of today, "The
section should be marked as not loadable" on
https://sourceware.org/binutils/docs/ld/Output-Section-Type.html is
outdated for ELF.
The release function does not reset the per cpu variable when it is
called. That will prevent creation again as the variable will be
already from the previous creation.
security_sid_to_context() expects a pointer to an u32 as the address
where to store the length of the computed context.
Reported by sparse:
security/selinux/xfrm.c:359:39: warning: incorrect type in arg 4
(different signedness)
security/selinux/xfrm.c:359:39: expected unsigned int
[usertype] *scontext_len
security/selinux/xfrm.c:359:39: got int *
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: wrapped commit description] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The xts module needs ecb to be present as it's meant to work
on top of ecb. This patch adds a softdep so ecb can be included
automatically into the initramfs.
Use set_disk_ro to propagate the read-only state to the block layer
instead of checking for it in ->open and leaking a reference in case
of a read-only device.
Commit 111be8839817 ("block-throttle: avoid double charge") marks bio as
BIO_THROTTLED unconditionally if __blk_throtl_bio() is called on this bio,
then this bio won't be called into __blk_throtl_bio() any more. This way
is to avoid double charge in case of bio splitting. It is reasonable for
read/write throughput limit, but not reasonable for IOPS limit because
block layer provides io accounting against split bio.
Chunguang Xu has already observed this issue and fixed it in commit 4f1e9630afe6 ("blk-throtl: optimize IOPS throttle for large IO scenarios").
However, that patch only covers bio splitting in __blk_queue_split(), and
we have other kind of bio splitting, such as bio_split() &
submit_bio_noacct() and other ways.
This patch tries to fix the issue in one generic way by always charging
the bio for iops limit in blk_throtl_bio(). This way is reasonable:
re-submission & fast-cloned bio is charged if it is submitted to same
disk/queue, and BIO_THROTTLED will be cleared if bio->bi_bdev is changed.
This new approach can get much more smooth/stable iops limit compared with
commit 4f1e9630afe6 ("blk-throtl: optimize IOPS throttle for large IO
scenarios") since that commit can't throttle current split bios actually.
Also this way won't cause new double bio iops charge in
blk_throtl_dispatch_work_fn() in which blk_throtl_bio() won't be called
any more.
Reported-by: Ning Li <lining2020x@163.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Chunguang Xu <brookxu@tencent.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20220216044514.2903784-7-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
KCSAN reports data races between the rcu_segcblist_clear_flags() and
rcu_segcblist_set_flags() functions, though misreporting the latter
as a call to rcu_segcblist_is_enabled() from call_rcu(). This commit
converts the updates of this field to WRITE_ONCE(), relying on the
resulting unmarked reads to continue to detect buggy concurrent writes
to this field.
Reported-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The npcm driver has a bunch of references to the irq_chip parent_device
field, but never sets it.
Fix it by fishing that reference from somewhere else, but it is
obvious that these debug statements were never used. Also remove
an unused field in a local data structure.
If we allow architectures to bring APs online in parallel, then we end
up requiring rcu_cpu_starting() to be reentrant. But currently, the
manipulation of rnp->ofl_seq is not thread-safe.
However, rnp->ofl_seq is also fairly much pointless anyway since both
rcu_cpu_starting() and rcu_report_dead() hold rcu_state.ofl_lock for
fairly much the whole time that rnp->ofl_seq is set to an odd number
to indicate that an operation is in progress.
So drop rnp->ofl_seq completely, and use only rcu_state.ofl_lock.
This has a couple of minor complexities: lockdep will complain when we
take rcu_state.ofl_lock, and currently accepts the 'excuse' of having
an odd value in rnp->ofl_seq. So switch it to an arch_spinlock_t to
avoid that false positive complaint. Since we're killing rnp->ofl_seq
of course that 'excuse' has to be changed too, so make it check for
arch_spin_is_locked(rcu_state.ofl_lock).
There's no arch_spin_lock_irqsave() so we have to manually save and
restore local interrupts around the locking.
At Paul's request based on Neeraj's analysis, make rcu_gp_init not just
wait but *exclude* any CPU online/offline activity, which was fairly
much true already by virtue of it holding rcu_state.ofl_lock.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since STRING_CST may not be NUL terminated, strncmp() was used for check
for equality. However, this may lead to mismatches for longer section
names where the start matches the tested-for string. Test for exact
equality by checking for the presences of NUL termination.
The kernel test rebot report this warning: Uninitialized variable: ret.
The code flow may return value of ret directly. This value is an
uninitialized variable, here is fix it.
Signed-off-by: Kai Ye <yekai13@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Atmel is doing some things in the I2C ISR, during which
period it will not respond to further commands. This is
particularly true of the POWERON command.
Increase delays appropriately, and retry should I2C errors be
reported.
The usual LSM hook "bail on fail" scheme doesn't work for cases where
a security module may return an error code indicating that it does not
recognize an input. In this particular case Smack sees a mount option
that it recognizes, and returns 0. A call to a BPF hook follows, which
returns -ENOPARAM, which confuses the caller because Smack has processed
its data.
The SELinux hook incorrectly returns 1 on success. There was a time
when this was correct, however the current expectation is that it
return 0 on success. This is repaired.
Reported-by: syzbot+d1e3b1d92d25abf97943@syzkaller.appspotmail.com Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Acked-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Jason Donenfeld reports that my commit 1c24a186398f ("fs: fd tables have
to be multiples of BITS_PER_LONG") doesn't work, and the reason is an
embarrassing brown-paper-bag bug.
Yes, we want to align the number of fds to BITS_PER_LONG, and yes, the
reason they might not be aligned is because the incoming 'max_fd'
argument might not be aligned.
But aligining the argument - while simple - will cause a "infinitely
big" maxfd (eg NR_OPEN_MAX) to just overflow to zero. Which most
definitely isn't what we want either.
The obvious fix was always just to do the alignment last, but I had
moved it earlier just to make the patch smaller and the code look
simpler. Duh. It certainly made _me_ look simple.
Fixes: 1c24a186398f ("fs: fd tables have to be multiples of BITS_PER_LONG") Reported-and-tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Fedor Pchelkin <aissur0002@gmail.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "test_dev" pointer is freed but then returned to the caller.
Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This has always been the rule: fdtables have several bitmaps in them,
and as a result they have to be sized properly for bitmaps. We walk
those bitmaps in chunks of 'unsigned long' in serveral cases, but even
when we don't, we use the regular kernel bitops that are defined to work
on arrays of 'unsigned long', not on some byte array.
Now, the distinction between arrays of bytes and 'unsigned long'
normally only really ends up being noticeable on big-endian systems, but
Fedor Pchelkin and Alexey Khoroshilov reported that copy_fd_bitmaps()
could be called with an argument that wasn't even a multiple of
BITS_PER_BYTE. And then it fails to do the proper copy even on
little-endian machines.
The bug wasn't in copy_fd_bitmap(), but in sane_fdtable_size(), which
didn't actually sanitize the fdtable size sufficiently, and never made
sure it had the proper BITS_PER_LONG alignment.
That's partly because the alignment historically came not from having to
explicitly align things, but simply from previous fdtable sizes, and
from count_open_files(), which counts the file descriptors by walking
them one 'unsigned long' word at a time and thus naturally ends up doing
sizing in the proper 'chunks of unsigned long'.
But with the introduction of close_range(), we now have an external
source of "this is how many files we want to have", and so
sane_fdtable_size() needs to do a better job.
This also adds that explicit alignment to alloc_fdtable(), although
there it is mainly just for documentation at a source code level. The
arithmetic we do there to pick a reasonable fdtable size already aligns
the result sufficiently.
In fact,clang notices that the added ALIGN() in that function doesn't
actually do anything, and does not generate any extra code for it.
It turns out that gcc ends up confusing itself by combining a previous
constant-sized shift operation with the variable-sized shift operations
in roundup_pow_of_two(). And probably due to that doesn't notice that
the ALIGN() is a no-op. But that's a (tiny) gcc misfeature that doesn't
matter. Having the explicit alignment makes sense, and would actually
matter on a 128-bit architecture if we ever go there.
This also adds big comments above both functions about how fdtable sizes
have to have that BITS_PER_LONG alignment.
The list iterator value 'rule' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, return 'rule' when found, otherwise return NULL.
In nfs4_callback_devicenotify(), if we don't find a matching entry for
the deviceid, we're left with a pointer to 'struct nfs_server' that
actually points to the list of super blocks associated with our struct
nfs_client.
Furthermore, even if we have a valid pointer, nothing pins the super
block, and so the struct nfs_server could end up getting freed while
we're using it.
Since all we want is a pointer to the struct pnfs_layoutdriver_type,
let's skip all the iteration over super blocks, and just use APIs to
find the layout driver directly.
When switching zones or network namespaces without doing a ct clear in
between, it is now leaking a reference to the old ct entry. That's
because tcf_ct_skb_nfct_cached() returns false and
tcf_ct_flow_table_lookup() may simply overwrite it.
The fix is to, as the ct entry is not reusable, free it already at
tcf_ct_skb_nfct_cached().
Reported-by: Florian Westphal <fw@strlen.de> Fixes: 2f131de361f6 ("net/sched: act_ct: Fix flow table lookup after ct clear or switching zones") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Its the same as nf_conntrack_put(), but without the
need for an indirect call. The downside is a module dependency on
nf_conntrack, but all of these already depend on conntrack anyway.
Cc: Paul Blakey <paulb@mellanox.com> Cc: dev@openvswitch.org Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
These are negative tests, testing TLS code rejects certain
operations. They won't pass without TLS enabled, pure TCP
accepts those operations.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Fixes: d87d67fd61ef ("selftests: tls: test splicing cmsgs") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Clang static analysis reports this representative issue
rvu_npc.c:898:15: warning: Assigned value is garbage
or undefined
req.match_id = action.match_id;
^ ~~~~~~~~~~~~~~~
The initial setting of action is conditional on
if (is_mcam_entry_enabled(...))
The later check of action.op will sometimes be garbage.
So initialize action.
Reduce setting of
*(u64 *)&action = 0x00;
to
*(u64 *)&action = 0;
Fixes: 967db3529eca ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
As the possible failure of the allocation, devm_kzalloc() may return NULL
pointer.
Therefore, it should be better to check the 'db' in order to prevent
the dereference of NULL pointer.
Fixes: 10615907e9b51 ("net: sparx5: switchdev: adding frame DMA functionality") Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the link layer is terminating, x25->neighbour will be set to NULL
in x25_disconnect(). As a result, it could cause null-ptr-deref bugs in
x25_sendmsg(),x25_recvmsg() and x25_connect(). One of the bugs is
shown below.
The code sets NULL to x25->neighbour in position (1) and dereferences
x25->neighbour in position (2), which could cause null-ptr-deref bug.
This patch adds lock_sock() in x25_kill_by_neigh() in order to synchronize
with x25_sendmsg(), x25_recvmsg() and x25_connect(). What`s more, the
sock held by lock_sock() is not NULL, because it is extracted from x25_list
and uses x25_list_lock to synchronize.
Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix build errors when PTP_1588_CLOCK=m and SPARX5_SWTICH=y.
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ethtool.o: in function `sparx5_get_ts_info':
sparx5_ethtool.c:(.text+0x146): undefined reference to `ptp_clock_index'
arc-linux-ld: sparx5_ethtool.c:(.text+0x146): undefined reference to `ptp_clock_index'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o: in function `sparx5_ptp_init':
sparx5_ptp.c:(.text+0xd56): undefined reference to `ptp_clock_register'
arc-linux-ld: sparx5_ptp.c:(.text+0xd56): undefined reference to `ptp_clock_register'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o: in function `sparx5_ptp_deinit':
sparx5_ptp.c:(.text+0xf30): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf30): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf38): undefined reference to `ptp_clock_unregister'
arc-linux-ld: sparx5_ptp.c:(.text+0xf46): undefined reference to `ptp_clock_unregister'
arc-linux-ld: drivers/net/ethernet/microchip/sparx5/sparx5_ptp.o:sparx5_ptp.c:(.text+0xf46): more undefined references to `ptp_clock_unregister' follow
Fixes: 3cfa11bac9bb ("net: sparx5: add the basic sparx5 driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Steen Hegelund <steen.hegelund@microchip.com> Cc: Bjarni Jonasson <bjarni.jonasson@microchip.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
After disable sriov, VF still has some config and info need to be
cleaned, which configured by PF. This patch clean the HW config
and SW struct vport->vf_info.
Fixes: fa8d82e853e8 ("net: hns3: Add support of .sriov_configure in HNS3 driver") Signed-off-by: Peng Li<lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If __nfs_pageio_add_request() fails to add the request, it will return
with either desc->pg_error < 0, or mirror->pg_recoalesce will be set, so
we are guaranteed either to exit the function altogether, or to loop.
However if there is nothing left in mirror->pg_list to coalesce, we must
exit, so make sure that we clear mirror->pg_recoalesce every time we
loop.
Reported-by: Olga Kornievskaia <aglo@umich.edu> Fixes: 70536bf4eb07 ("NFS: Clean up reset of the mirror accounting variables") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The purpose of the last test case is to test VXLAN encapsulation and
decapsulation when the underlay lookup takes place in a non-default VRF.
This is achieved by enslaving the physical device of the tunnel to a
VRF.
The binding of the VXLAN UDP socket to the VRF happens when the VXLAN
device itself is opened, not when its physical device is opened. This
was also mentioned in the cited commit ("tests that moving the underlay
from a VRF to another works when down/up the VXLAN interface"), but the
test did something else.
Fix it by reopening the VXLAN device instead of its physical device.
Before:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
After:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [ OK ]
Fixes: 03f1c26b1c56 ("test/net: Add script for VXLAN underlay in a VRF") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220324200514.1638326-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A Broadcom AC201 PHY (same entry as 5241) would be flagged by the
Broadcom UniMAC MDIO controller as not completing the turn around
properly since the PHY expects 65 MDC clock cycles to complete a write
cycle, and the MDIO controller was only sending 64 MDC clock cycles as
determined by looking at a scope shot.
This would make the subsequent read fail with the UniMAC MDIO controller
command field having MDIO_READ_FAIL set and we would abort the
brcm_fet_config_init() function and thus not probe the PHY at all.
After issuing a software reset, wait for at least 1ms which is well
above the 1us reset delay advertised by the datasheet and issue a dummy
read to let the PHY turn around the line properly. This read
specifically ignores -EIO which would be returned by MDIO controllers
checking for the line being turned around.
If we have a genuine reaad failure, the next read of the interrupt
status register would pick it up anyway.
Currently, when PF set VF VLAN, it sends notify mailbox to VF
if VF alive. VF stop its traffic, and send request mailbox
to PF, then PF updates VF VLAN. It's a bit complex. If VF is
killed before sending request, PF will not set VF VLAN without
any log.
This patch refines the process, PF can set VF VLAN direclty,
and then notify the VF. If VF is resetting at that time, the
notify may be dropped, so VF should query it after reset finished.
Fixes: 92f11ea177cd ("net: hns3: fix set port based VLAN issue for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Printing the whole MAC addresse may bring security risks. Therefore,
the MAC address is partially encrypted to improve security.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When adding port base VLAN, vf VLAN need to remove from HW and modify
the vlan state in vf VLAN list as false. If the periodicity task is
freeing the same node, it may cause "use after free" error.
This patch adds a vlan list lock to protect the vlan list.
Currently, Port base vlan is initiated by PF and configured to its VFs,
by using command "ip link set <pf name> vf <vf id> vlan <vlan id>".
When a global reset was triggered, the hardware vlan table and the soft
recorded vlan information will be cleared by PF, and restored them until
VFs were ready. There is a short time window between the table had been
cleared and before table restored. If configured a new port base vlan tag
at this moment, driver will check the soft recorded vlan information,
and find there hasn't the old tag in it, which causing a warning print.
Due to the port base vlan is managed by PF, so the VFs's port base vlan
restoring should be handled by PF when PF was ready.
This patch fixes it.
Fixes: 039ba863e8d7 ("net: hns3: optimize the filter table entries handling when resetting") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the MAC address A is configured to vport A and then vport B. The MAC
address of vport A in the hardware becomes invalid. If the address of
vport A is changed to MAC address B, the driver needs to delete the MAC
address A of vport A. Due to the MAC address A of vport A has become
invalid in the hardware entry, so "-ENOENT" is returned. In this case, the
"used_umv_size" value recorded in driver is not updated. As a result, the
MAC entry status of the software is inconsistent with that of the hardware.
Therefore, the driver updates the umv size even if the MAC entry cannot be
found. Ensure that the software and hardware status is consistent.
Fixes: ee4bcd3b7ae4 ("net: hns3: refactor the MAC address configure") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
is_xen_pmu() is taking the cpu number as parameter, but it is not using
it. Instead it just tests whether the Xen PMU initialization on the
current cpu did succeed. As this test is done by checking a percpu
pointer, preemption needs to be disabled in order to avoid switching
the cpu while doing the test. While resuming from suspend() this seems
not to be the case:
[ 88.082751] ACPI: PM: Low-level resume complete
[ 88.087933] ACPI: EC: EC started
[ 88.091464] ACPI: PM: Restoring platform NVS memory
[ 88.097166] xen_acpi_processor: Uploading Xen processor PM info
[ 88.103850] Enabling non-boot CPUs ...
[ 88.108128] installing Xen timer for CPU 1
[ 88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138
[ 88.122256] caller is is_xen_pmu+0x12/0x30
[ 88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G W 5.16.13-2.fc32.qubes.x86_64 #1
[ 88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022
[ 88.145930] Call Trace:
[ 88.148757] <TASK>
[ 88.151193] dump_stack_lvl+0x48/0x5e
[ 88.155381] check_preemption_disabled+0xde/0xe0
[ 88.160641] is_xen_pmu+0x12/0x30
[ 88.164441] xen_smp_intr_init_pv+0x75/0x100
Fix that by replacing is_xen_pmu() by a simple boolean variable which
reflects the Xen PMU initialization state on cpu 0.
Modify xen_pmu_init() to return early in case it is being called for a
cpu other than cpu 0 and the boolean variable not being set.
Fixes: bf6dfb154d93 ("xen/PMU: PMU emulation code") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220325142002.31789-1-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When registering a clock that doesn't have a recalc_rate implementation,
and doesn't have its parent registered yet, we initialize the clk_core
rate and 'req_rate' fields to 0.
The rate field is later updated when the parent is registered in
clk_core_reparent_orphans_nolock() using __clk_recalc_rates(), but the
'req_rate' field is never updated.
This leads to an issue in clk_set_rate_range() and clk_put(), since
those functions will call clk_set_rate() with the content of 'req_rate'
to provide drivers with the opportunity to change the rate based on the
new boundaries. In this case, we would call clk_set_rate() with a rate
of 0, effectively enforcing the minimum allowed for this clock whenever
we would call one of those two functions, even though the actual rate
might be within range.
Let's fix this by setting 'req_rate' in
clk_core_reparent_orphans_nolock() with the rate field content just
updated by the call to __clk_recalc_rates().
virtio spec requires drivers to set DRIVER_OK before using VQs.
This is set automatically after probe returns, but virtio-vsock
driver uses VQs in the probe function to fill rx and event VQs
with new buffers.
Let's fix this, calling virtio_device_ready() before using VQs
in the probe function.
Fixes: 0ea9e1d3a9e3 ("VSOCK: Introduce virtio_transport.ko") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Complete the driver configuration, reading the negotiated features,
before using the VQs in the virtio_vsock_probe().
Fixes: 53efbba12cc7 ("virtio/vsock: enable SEQPACKET for transport") Suggested-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we fill VQs with empty buffers and kick the host, it may send
an interrupt. `vdev->priv` must be initialized before this since it
is used in the virtqueue callbacks.
Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock") Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: aec89f78cf01 ("clk: qcom: Add support for msm8994 global clock controller") Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20220319174940.341137-1-konrad.dybcio@somainline.org Tested-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The new PMU for s390 counts the execution of certain CPU instructions.
The root cause is the extremely small run time of the mytest program. It
just executes some assembly instructions and then exits.
In above invocation the instruction is executed exactly one time (-c1
option). The PMU is expected to report this one time execution by a
counter value of one, but fails to do so in some cases, not all.
Debugging reveals the invocation of the child process is done
*before* the counter events are installed and enabled.
Tracing reveals that sometimes the child process starts and exits before
the event is installed on all CPUs. The more CPUs the machine has, the
more often this miscount happens.
Fix this by reversing the start of the work load after the events have
been installed on the specified CPUs. Now the comment also matches the
code.
Output after:
# perf stat -a -e new_pmu/INSTRUCTION_7/ -- mytest -c1 7
Currently kdb_putarea_size() uses copy_from_kernel_nofault() to write *to*
arbitrary kernel memory. This is obviously wrong and means the memory
modify ('mm') command is a serious risk to debugger stability: if we poke
to a bad address we'll double-fault and lose our debug session.
Fix this the (very) obvious way.
Note that there are two Fixes: tags because the API was renamed and this
patch will only trivially backport as far as the rename (and this is
probably enough). Nevertheless Christoph's rename did not introduce this
problem so I wanted to record that!
Fixes: fe557319aa06 ("maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault") Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)") Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20220128144055.207267-1-daniel.thompson@linaro.org Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios
coming before the TCP window tracking, otherwise such connections will
fail in the window check.
Update tcp_options() to leave this flag in place and add a new helper
function to reset the tcp window state.
Based on patch from Sven Auhagen.
Fixes: c4832c7bbc3f ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking") Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Avoid socket state races due to repeated calls to ->connect() using the
same socket. If connect() returns 0 due to the connection having
completed, but we are in fact in a closing state, then we may leave the
XPRT_CONNECTING flag set on the transport.
rpc tasks can be marked as RPC_TASK_SWAPPER. This causes GFP_MEMALLOC
to be used for some allocations. This is needed in some cases, but not
in all where it is currently provided, and in some where it isn't
provided.
Currently *all* tasks associated with a rpc_client on which swap is
enabled get the flag and hence some GFP_MEMALLOC support.
GFP_MEMALLOC is provided for ->buf_alloc() but only swap-writes need it.
However xdr_alloc_bvec does not get GFP_MEMALLOC - though it often does
need it.
xdr_alloc_bvec is called while the XPRT_LOCK is held. If this blocks,
then it blocks all other queued tasks. So this allocation needs
GFP_MEMALLOC for *all* requests, not just writes, when the xprt is used
for any swap writes.
Similarly, if the transport is not connected, that will block all
requests including swap writes, so memory allocations should get
GFP_MEMALLOC if swap writes are possible.
So with this patch:
1/ we ONLY set RPC_TASK_SWAPPER for swap writes.
2/ __rpc_execute() sets PF_MEMALLOC while handling any task
with RPC_TASK_SWAPPER set, or when handling any task that
holds the XPRT_LOCKED lock on an xprt used for swap.
This removes the need for the RPC_IS_SWAPPER() test
in ->buf_alloc handlers.
3/ xprt_prepare_transmit() sets PF_MEMALLOC after locking
any task to a swapper xprt. __rpc_execute() will clear it.
3/ PF_MEMALLOC is set for all the connect workers.
When memory is short, new worker threads cannot be created and we depend
on the minimum one rpciod thread to be able to handle everything.
So it must not block waiting for memory.
mempools are particularly a problem as memory can only be released back
to the mempool by an async rpc task running. If all available
workqueue threads are waiting on the mempool, no thread is available to
return anything.
rpc_malloc() can block, and this might cause deadlocks.
So check RPC_IS_ASYNC(), rather than RPC_IS_SWAPPER() to determine if
blocking is acceptable.
Syzbot reported divide error in dbNextAG(). The problem was in missing
validation check for malicious image.
Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any
validation checks, but dbNextAG() blindly use bmp->db_numag in divide
expression
Fix it by validating bmp->db_numag in dbMount() and return an error if
image is malicious
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+46f5c25af73eb8330eb6@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When "driver_async_probe=nulltty" is used on the kernel boot command line,
it causes an Unknown parameter message and the string is added to init's
environment strings, polluting them.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6
driver_async_probe=nulltty", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc6
driver_async_probe=nulltty
Change the return value of the __setup function to 1 to indicate
that the __setup option has been handled.
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 1ea61b68d0f8 ("async: Add cmdline option to specify drivers to be async probed") Cc: Feng Tang <feng.tang@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Reviewed-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220301041829.15137-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Google Coreboot implementation requires IOMEM functions
(memmremap, memunmap, devm_memremap), but does not specify this is its
Kconfig. This results in build errors when HAS_IOMEM is not set, such as
on some UML configurations:
/usr/bin/ld: drivers/firmware/google/coreboot_table.o: in function `coreboot_table_probe':
coreboot_table.c:(.text+0x311): undefined reference to `memremap'
/usr/bin/ld: coreboot_table.c:(.text+0x34e): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/memconsole-coreboot.o: in function `memconsole_probe':
memconsole-coreboot.c:(.text+0x12d): undefined reference to `memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x17e): undefined reference to `devm_memremap'
/usr/bin/ld: memconsole-coreboot.c:(.text+0x191): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_destroy.isra.0':
vpd.c:(.text+0x300): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_section_init':
vpd.c:(.text+0x382): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x459): undefined reference to `memunmap'
/usr/bin/ld: drivers/firmware/google/vpd.o: in function `vpd_probe':
vpd.c:(.text+0x59d): undefined reference to `memremap'
/usr/bin/ld: vpd.c:(.text+0x5d3): undefined reference to `memunmap'
collect2: error: ld returned 1 exit status
Fixes: a28aad66da8b ("firmware: coreboot: Collapse platform drivers into bus core") Acked-By: anton ivanov <anton.ivanov@cambridgegreys.com> Acked-By: Julius Werner <jwerner@chromium.org> Signed-off-by: David Gow <davidgow@google.com> Link: https://lore.kernel.org/r/20220225041502.1901806-1-davidgow@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
__setup() handlers should return 1 to indicate that the boot option
has been handled. A return of 0 causes the boot option/value to be
listed as an Unknown kernel parameter and added to init's (limited)
environment strings. So return 1 from kgdbts_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite") Cc: kgdb-bugreport@lists.sourceforge.net Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220308033255.22118-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
acrn_vm_ram_map can't pin the user pages with VM_PFNMAP flag
by calling get_user_pages_fast(), the PA(physical pages)
may be mapped by kernel driver and set PFNMAP flag.
This patch fixes logic to setup EPT mapping for PFN mapped RAM region
by checking the memory attribute before adding EPT mapping for them.
When 8250 UART is using DMA, x_char (XON/XOFF) is never sent
to the wire. After this change, x_char is injected correctly.
Create uart_xchar_out() helper for sending the x_char out and
accounting related to it. It seems that almost every driver
does these same steps with x_char. Except for 8250, however,
almost all currently lack .serial_out so they cannot immediately
take advantage of this new helper.
The downside of this patch is that it might reintroduce
the problems some devices faced with mixed DMA/non-DMA transfer
which caused revert f967fc8f165f (Revert "serial: 8250_dma:
don't bother DMA with small transfers"). However, the impact
should be limited to cases with XON/XOFF (that didn't work
with DMA capable devices to begin with so this problem is not
very likely to cause a major issue, if any at all).
Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Reported-by: Gilles Buloz <gilles.buloz@kontron.com> Tested-by: Gilles Buloz <gilles.buloz@kontron.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220314091432.4288-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
So return 1 from kgdboc_option_setup().
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd kgdbts=", will be passed to user space.
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc7
kgdboc=kbd
kgdbts=
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic") Fixes: f2d937f3bf00 ("consoles: polling support, kgdboc") Cc: He Zhe <zhe.he@windriver.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: kgdb-bugreport@lists.sourceforge.net Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: linux-serial@vger.kernel.org Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20220309033018.17936-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
__setup() handlers should return 1 to indicate that the boot option
has been handled or 0 to indicate that it was not handled.
Add a pr_warn() message if the option value is invalid and then
always return 1.
The device_node pointer is returned by of_parse_phandle() with refcount
incremented. We should use of_node_put() on it when done.
Fixes: 1e747e59cc4d ("pinctrl: rockchip: base regmap supplied by a syscon") Fixes: 14dee8677e19 ("pinctrl: rockchip: let pmu registers be supplied by a syscon") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220307120234.28657-1-linmq006@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mtk_pconf_group_get(), used to read back pingroup pin config state,
simply returns a set of configs saved from a previous invocation of
mtk_pconf_group_set(). This is an unfiltered, unvalidated set passed
in from the pinconf core, which does not match the current hardware
state.
Since the driver library is designed to have one pin per group, pass
through mtk_pconf_group_get() to mtk_pinconf_get(), to read back the
current pin config state of the only pin in the group.
Also drop the assignment of pin config state to the group.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-5-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
For mtk_pinconf_get(), the "argument" argument is typically returned by
pinconf_to_config_argument(), which holds the value for a given pinconf
parameter. It certainly should not have the type of "enum pin_config_param",
which describes the type of the pinconf parameter itself.
Change the type to u32, which matches the return type of
pinconf_to_config_argument().
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-4-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When reading back pin bias settings, if the pin is not in the
corresponding bias state, the function should return -EINVAL.
Fix this in the mediatek-paris pinctrl library so that the read back
state is not littered with bogus a "input bias disabled" combined with
"pull up" or "pull down" states.
Fixes: 805250982bb5 ("pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220308100956.2750295-3-wenst@chromium.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the GB-PC2 devicetree. Refer to the schematics of the device for more
information.
GB-PC2 devicetree fixes:
- Include mt7621.dtsi instead of gbpc1.dts. Add the missing definitions.
- Remove gpio-leds node as the system LED is not wired to anywhere on
the board and the power LED is directly wired to GND.
- Remove uart3 pin group from gpio-pinmux node as it's not used as GPIO.
- Use reg 7 for the external phy to be on par with
Documentation/devicetree/bindings/net/dsa/mt7530.txt.
- Use the status value "okay".
Add pinctrl properties with rgmii1 & mdio pins under ethernet node which
was wrongfully put under an external phy node.
GMAC1 will start working with this fix.
Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the
schematics of the device for more information.
LED fixes:
- Change GPIO6 LED label from system to power as GPIO6 is connected to
PLED.
- Add default-on default-trigger to power LED.
- Change GPIO8 LED label from status to system as GPIO8 is connected to
SYS_LED.
- Add disk-activity default-trigger to system LED.
- Switch to the color:function naming scheme.
- Remove lan1 and lan2 LEDs as they don't exist.
Pinctrl fixes:
- Claim state_default node under pinctrl node.
- Change pinctrl0 node name to state-default.
- Change gpio node name to gpio-pinmux to respect
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml.
- Sort pin groups alphabetically.
Misc fixes:
- Fix formatting.
- Use the status value "okay".
- Define hexadecimal addresses in lower case.
- Make hexadecimal addresses for memory easier to read.
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.
Any registered clk_core structure can have a NULL pointer in its dev
field. While never actually documented, this is evidenced by the wide
usage of clk_register and clk_hw_register with a NULL device pointer,
and the fact that the core of_clk_hw_register() function also passes a
NULL device pointer.
A call to clk_hw_get_clk() on a clk_hw struct whose clk_core is in that
case will result in a NULL pointer derefence when it calls dev_name() on
that NULL device pointer.
Add a test for this case and use NULL as the dev_id if the device
pointer is NULL.
Fixes: 30d6f8c15d2c ("clk: add api to get clk consumer from clk_hw") Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220225143534.405820-2-maxime@cerno.tech Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In preparation for removing BLK aperture support the NVDIMM unit tests
discovered that the default alignment can be set higher than the
capacity of the region. Fall back to PAGE_SIZE in that case.
Given this has not been seen in the wild, elide notifying -stable.
The device_node pointer is returned by of_parse_phandle() or
of_get_child_by_name() with refcount incremented.
We should use of_node_put() on it when done.
This function only call of_node_put(node) when of_address_to_resource
succeeds, missing error cases.
Remove the loaded hisi_dma driver and reload it, the driver fails
to work properly. The following error is reported in the kernel log:
[ 1475.597609] hisi_dma 0000:7b:00.0: Failed to allocate MSI vectors!
[ 1475.604915] hisi_dma: probe of 0000:7b:00.0 failed with error -28
As noted in "The MSI Driver Guide HOWTO"[1], the number of MSI
interrupt must be a power of two. The Kunpeng DMA driver allocates 30
MSI interrupts. As a result, no space left on device is reported
when the driver is reloaded and allocates interrupt vectors from the
interrupt domain.
This patch changes the number of interrupt vectors allocated by
hisi_dma driver to 32 to avoid this problem.
The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range.
The > needs to be >= to prevent an off by one access.
Fixes: d5f1e6a2bb61 ("clk: imx: imx8qxp-lpcg: add parsing clocks from device tree") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Link: https://lore.kernel.org/r/20220228075014.GD13685@kili Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The audio_mclk_root_clk was added as a gate with the CCGR121 (0x4790),
but according to the reference manual, there is no such gate. The
CCGR121 belongs to ECSPI2 and it is not shared.
Fixes: 8f6d8094b215b57 ("ARM: imx: add imx7d clk tree support") Reported-by: David Wolfe <david.wolfe@nxp.com> Signed-off-by: Abel Vesa <abel.vesa@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20220127141052.1900174-2-abel.vesa@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When valid kernel command line parameters
dma_debug=off dma_debug_entries=100
are used, they are reported as Unknown parameters and added to init's
environment strings, polluting it.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off dma_debug_entries=100", will be passed to user space.
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
dma_debug=off
dma_debug_entries=100
Return 1 from these __setup handlers to indicate that the command line
option has been handled.
Fixes: 59d3daafa1726 ("dma-debug: add kernel command line parameters") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Joerg Roedel <joro@8bytes.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: iommu@lists.linux-foundation.org Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix an endless loop in recv_func. If pending_frame is not NULL, we're
stuck in the while loop forever. We have to call rtw_alloc_recvframe
each time we loop.
Fixes: 15865124feed ("staging: r8188eu: introduce new core dir for RTL8188eu driver") Reported-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20220226181457.1138035-4-martin@kaiser.cx Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Set em485->active_timer = NULL isn't always enough to take out the stop
timer. While there is a check that it acts in the right state (i.e.
waiting for RTS-after-send to pass after sending some chars) but the
following might happen:
- CPU1: some chars send, shifter becomes empty, stop tx timer armed
- CPU0: more chars send before RTS-after-send expired
- CPU0: shifter empty irq, port lock taken
- CPU1: tx timer triggers, waits for port lock
- CPU0: em485->active_timer = &em485->stop_tx_timer, hrtimer_start(),
releases lock()
- CPU1: get lock, see em485->active_timer == &em485->stop_tx_timer,
tear down RTS too early
This fix bases on research done by Steffen Trumtrar.
The use of mapping_set_error() in conjunction with calls to
filemap_check_errors() is problematic because every error gets reported
as either an EIO or an ENOSPC by filemap_check_errors() in functions
such as filemap_write_and_wait() or filemap_write_and_wait_range().
In almost all cases, we prefer to use the more nuanced wb errors.
Fixes: b8946d7bfb94 ("NFS: Revalidate the file mapping on all fatal writeback errors") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
