Avoid making AstData depend on libxml2 to compile.
We have some functions inside the AstData API to get the tree
in XML form, but it is not required at the moment to compile
asterisk and we can disable that part of the API if we don't have
libxml2 support.
Ensure channel state is not incorrectly set in the case of a very early answer.
The needringing bit was being read in dahdi_read after answering thereby
setting the state to ringing from up. This clears needringing upon answering
so that is no longer possible.
Richard Mudgett [Fri, 30 Apr 2010 22:24:28 +0000 (22:24 +0000)]
Separate the uses of NUM_DCHANS and MAX_CHANNELS into PRI, SS7, and MFCR2 users.
Created
SIG_PRI_MAX_CHANNELS, SIG_PRI_NUM_DCHANS
SIG_SS7_MAX_CHANNELS, SIG_SS7_NUM_DCHANS
SIG_MFCR2_MAX_CHANNELS
Also fixed the declaration of pollers[] in mfcr2_monitor(). It was
dimensioned to the number of bytes in struct dahdi_mfcr2.pvts[] and not to
the same dimension of the struct dahdi_mfcr2.pvts[].
Fix potential crash from race condition due to accessing channel data without the channel locked.
In res_musiconhold.c, there are several places where a channel's
stream's existence is checked prior to calling ast_closestream on it. The issue
here is that in several cases, the channel was not locked while checking the
stream. The result was that if two threads checked the state of the channel's
stream at approximately the same time, then there could be a situation where
both threads attempt to call ast_closestream on the channel's stream. The result
here is that the refcount for the stream would go below 0, resulting in a crash.
I have added proper channel locking to res_musiconhold.c to ensure that
we do not try to check chan->stream without the channel locked. A Digium customer
has been using this patch for several weeks and has not had any crashes since
applying the patch.
Mark Michelson [Fri, 30 Apr 2010 19:53:36 +0000 (19:53 +0000)]
Fix logic reversal error when queue callers join the queue.
When a specific position is specified for the queue, the idea
was that the caller cannot be placed ahead of higher-priority
callers. Unfortunately, the logic was reversed so that the caller
could ONLY be placed ahead of higher priority callers.
Don't allow file descriptors to go above 64k, when we're closing them in a fork(2).
This saves time, when, even though the system allows the process limit to be
that high, the practical limit is much lower. Also introduce an additional
optimization, in the form of using the CLOEXEC flag to close descriptors at
the right time.
The code handling DTMF CallerID drops digits on long CallerID numbers and
may timeout waiting for the first ring with shorter numbers.
The DTMF emulation mode was not turned off when processing DTMF CallerID.
When the emulation code gets behind in processing the DTMF digits it can
skip a digit.
For shorter numbers, the timeout may have been too short. I increased it
from 2 seconds to 4 seconds. Four seconds is a typical time between rings
for many countries.
(closes issue #16460)
Reported by: sum
Patches:
issue16460.patch uploaded by rmudgett (license 664)
issue16460_v1.6.2.patch uploaded by rmudgett (license 664)
Tested by: sum, rmudgett
The middle_frame in the audiohook_write_list function was
being freed if a audiohook manipulator returned a failure.
This is incorrect logic. This patch resolves this and
adds detailed descriptions of how this function should work
and why manipulator failures must be ignored.
Issue_1.
In the local_hangup() 3 locks must be held at the same time... pvt, pvt->chan,
and pvt->owner. Proper deadlock avoidance is done when the channel to hangup
is the outbound chan_local channel, but when it is not the outbound channel we
have an issue... We attempt to do deadlock avoidance only on the tech pvt, when
both the tech pvt and the pvt->owner are locked coming into that loop. By
never giving up the pvt->owner channel deadlock avoidance is not entirely possible.
This patch resolves that by doing deadlock avoidance on both the pvt->owner and the pvt
when trying to get the pvt->chan lock.
Issue_2.
ast_prod() is used in ast_activate_generator() to queue a frame on the channel
and make the channel's read function get called. This function is used in
ast_activate_generator() while the channel is locked, which mean's the channel
will have a lock both from the generator code and the frame_queue code by the
time it gets to chan_local.c's local_queue_frame code... local_queue_frame
contains some of the same crazy deadlock avoidance that local_hangup requires,
and this recursive lock prevents that deadlock avoidance from happening correctly.
This patch removes ast_prod() from the channel lock so only one lock is held during
the local_queue_frame function.
Updating config.guess because after installing Ubuntu Server 9.10 and
running all the update scripts, running ./configure would not continue
because it was unable to determine what kind of system I had. After
updating config.guess things started working again.
........
Remove usage of `id` since it isn't useful and was causing breakge.
Solaris `id` doesn't support the -u argument. Instead of figuring out how to
fix this to work on Solaris, I decided to check why it was necessary and where
else it was used. It was only used in one place, and it hasn't been needed
for a very long time (I question whether it was ever needed).
........
Changed the warning to "Failed to decode CallerID on channel 'name'". The
message before it is likely more specific about why the CallerID decode
failed.
* Add additional sounds prompts for say_enumeration
* Update the English conference sounds prompts so they are better
quality and all sound more consistent
* Clean up the core-sounds-XX.txt and extra-sounds-XX.txt files to
include all present sound files
Both core (en, fr, es) and extra (en, fr) sounds files have been updated.
Issue #7321 implements a new chan_dahdi configuration option. However, a
change mentioned in the issue was never implemented. This is the change
that will allow the feature to work.
I added a note to chan_dahdi.conf.sample about the feature.
(closes issue #17143)
Reported by: djensen99
Patches:
diff.txt uploaded by djensen99 (license NA) (One line change)
Tested by: djensen99
........
Prevent Newchannel manager events for dummy channels.
No Newchannel manager event will be fired for channels that are
allocated to not match a registered technology type. Thus bogus
channels allocated solely for variable substitution or CDR
operations do not result in a Newchannel event.
Update res_fax and res_fax_spandsp to be compatible with Fax For Asterisk 1.2.
The fax session initilization code for T.38 faxes has been rewritten. T.38 session initialization was removed from generic_fax_exec, and split into two different code paths for receive and send. Also the 'z' option (to send a T.38 reinvite if we do not receive one) was added to sendfax.
In the output of 'fax show sessions', the 'Type' column has been renamed to 'Tech' and replaced with a new 'Tech' column that will report 'G.711' or 'T.38'.
Control of ECM defaults has been added to res_fax
A 'fax show settings' CLI command has been added.
Support of the new AST_T38_REQUEST_PARMS control method request to handle channels that have already received a T.38 reinvite before the FAX application is start has been added.
Support for the 'fax show settings' command has been added to res_fax_spandsp and handling of the ECM flag has been slightly altered.
When StopMonitor is called, ensure that it will not be restarted by a channel event.
(closes issue #16590)
Reported by: kkm
Patches:
resmonitor-16590-trunk.239289.diff uploaded by kkm (license 888)
........
This change allows a CDR record previously marked with disposition ANSWERED to be set as BUSY or NO ANSWER.
Additionally this change partially reverts r235635 and does not set the AST_CDR_FLAG_ORIGINATED flag on CDRs generated from ast_call(). To preserve proper CDR behavior, the AST_CDR_FLAG_DIALED flag is now cleared from all brige CDRs in ast_bridge_call().
Russell Bryant [Thu, 22 Apr 2010 21:06:53 +0000 (21:06 +0000)]
Add ast_event subscription unit test and fix some ast_event API bugs.
This patch introduces another test in test_event.c that exercises most of the
subscription related ast_event API calls. I made some minor additions to the
existing event allocation test to increase API coverage by the test code.
Finally, I made a list in a comment of API calls not yet touched by the test
module as a to-do list for future test development.
During the development of this test code, I discovered a number of bugs in
the event API.
1) subscriptions to AST_EVENT_ALL were not handled appropriately in a couple
of different places. The API allows a subscription to all event types,
but with IE parameters, just as if it was a subscription to a specific
event type. However, the parameters were being ignored. This affected
ast_event_check_subscriber() and event distribution to subscribers.
2) Some of the logic in ast_event_check_subscriber() for checking subscriptions
against query parameters was wrong.
Jason Parker [Thu, 22 Apr 2010 19:08:01 +0000 (19:08 +0000)]
Remove ABI differences that occured when compiling with DEBUG_THREADS.
"Bad Things" would happen if Asterisk was compiled with DEBUG_THREADS, but a
loaded module was not (or vice versa). This also immensely simplifies the
lock code, since there are no longer 2 separate versions of them.
This module implements an abstraction for retrieving and exporting
asterisk data.
Developed by:
Brett Bryant <brettbryant@gmail.com>
Eliel C. Sardanons (LU1ALY) <eliels@gmail.com>
For the Google Summer of code 2009 Project.
Documentation can be found in doxygen format and inside the
header include/asterisk/data.h
Fix looping forever when no input received in certain voicemail menu scenarios.
Specifically, prompting for an extension (when leaving or forwarding a message)
or when prompting for a digit (when saving a message or changing folders).
Add ability to generate ASCII documentation from the TeX files.
These changes add the ability to run 'make asterisk.txt' just like the existing
'make asterisk.pdf' commands to generate a text document from the TeX files we
have in the doc/tex/ directory. I've also updated a few of the .tex files because
they weren't properly escaping certain characters so they would show up as Unicode
characters (like [U+021C]). Made changes to the configure scripts so it would
detect the catdvi program which is required to convert the .dvi file generated
by latex.
I've also added a few lines to the build_tools/prep_tarball script so that the
text documentation gets generated and added to future tarballs of Asterisk
releases.
David Vossel [Wed, 21 Apr 2010 18:13:36 +0000 (18:13 +0000)]
fixes issue with double "sip:" in header field
This is a clear mistake in logic. Future discussions
about how to avoid having to handle uri's like this
should take place in the future, but this fix needs
to go in for now.
Added a new manager command to mute/unmute MixMonitor audio on a channel.
Added a new feature to audiohooks so that you can mute either read / write
(or both) types of frames - this allows for MixMonitor to mute either side
of the conversation without affecting the conversation itself.
Play correct prompt when voicemail store failure occurs after attempted forward.
If a user's mailbox was full and a message was attempted to be forwarded to
said box, warnings on the console would indicate failure. However, the played
prompt was that of success (vm-msgsaved). Now storage failure is taken into
account and the correct prompt (vm-mailboxfull) is played when appropriate.
Updated the doxygen \arg line after looking at the file for some other Asterisk documentation
and noticing they weren't up to date. Thanks to seanbright for looking at the code for me :)
Jason Parker [Mon, 19 Apr 2010 21:49:30 +0000 (21:49 +0000)]
Don't consider a missing indications.conf to be a critical error.
There were many changes in revision 176627 which would avoid the error that a
missing config would have caused. Other than this, there are no other config
files (including asterisk.conf, surprisingly) that are required.
Mark Michelson [Mon, 19 Apr 2010 18:42:31 +0000 (18:42 +0000)]
Commit compromise I suggested on review 608.
This allows for multiple SRV queries to be done
from the dialplan for the same service on a single call while
still allowing one to bypass the call to SRVQUERY if they so
please.
Taking action since no comments had been left for a while.
This can easily be reverted if needed. External tests
still pass.
Make the mixmonitor thread process audio frames faster
Mantis issue 17078 reports MixMonitor recordings have shorter durations than
the call duration. This was because the mixmonitor thread was not processing
frames from the audiohook fast enough. The mixmonitor thread would slowly fall
behind the most recent audio frame and when the channel hangs up, the mixmonitor
thread would exit without processing the same number of frames as the channel;
leaving the mixmonitor recording shorter than actual call duration.
This revision fixes this issue by moving the ast_audiohook_trigger_wait() and
the subsequent audiohook.status check into the block where the
ast_audiohook_read_frame() function returns NULL.
Enable PRI SERVICE message support in chan_dahdi for the 'national' switchtype
Revision 1072 of libpri added SERVICE message support for the 'national'
switchtype. The attached patch enables the use of 'pri service' CLI commands
on dahdi channels that are configured for the 'national' switchtype.
Don't recreate peer, when responding to a repeated deregistration attempt.
When a reply to a deregistration is lost in transmit, the client retries the
deregistration. Previously, this would cause a realtime/autocreate peer to be
loaded back into memory, after it had already been correctly purged. Instead,
we just want to resend the reply without loading the peer.
Update the backtrace.txt documentation so it conforms to the same layout as
other documents we've been working on recently. Additionally, add a bunch of
new information about gathering backtraces for crashes and deadlocks, along
with ways of verifying your file before uploading it. Create a couple of one
line commands for people to generate the files we need.
Yet another issue where the conversion of the application delimiter to comma caused an issue.
Application arguments within the feature map could possibly contain a comma,
which conflicts with the syntax of the features.conf configuration file. This
patch allows the argument to be wrapped in parentheses or quoted, to allow the
application arguments to be interpreted as a single configuration parameter.
Add an option to restore past broken behavor of the Events manager action
Before r238915, certain values for the EventMask parameter of the Events action would result in no response being returned. This patch adds an option to restore that broken behavior. Also while fixing this bug I discovered that passing an empty EventMasks parameter would also result in no response being returned, this has been fixed as well while being preserved when the broken behavior is requested.
Mark Michelson [Mon, 12 Apr 2010 22:27:07 +0000 (22:27 +0000)]
Fix issue where recall would not happen when it should.
Specifically, the situation would happen when multiple
callers would request CC for a single generically-monitored
device. If the monitored device became available but the
caller did not answer the recall, then there was nothing
that would poke the CC core to let it know that it should
attempt to recall someone else instead.
After careful consideration, I came to the conclusion that
the only area of Asterisk that needed to be touched was the
generic CC monitor. All other types of CC would require something
outside of Asterisk to invoke a recall for a separate device.
This was accomplished by changing the generic monitor destructor
to poke other generic monitor instances if the device is currently
available and the specific instance was currently not suspended.
In order to not accidentally trigger recalls at bad times, the
fit_for_recall flag was also added to the generic_monitor_instance_list
struct. This gets set as soon as a monitored device becomes available.
It gets cleared if a CCNR request triggers the creation of a new
generic monitor instance. By doing this, we don't accidentally try
to recall a device when the monitored device was being monitored
for CCNR and never actually became available for recall in the first
place.
This error was discovered by Steve Pitts during in-house testing
at Digium.
Add How-To document on collecting debugging info for issues.asterisk.org
Paul Belanger has been helping a lot with bug tracking recently and created
this document that we can now point to when additional debugging information
is required. This document will help those filing issues to know how to get
the information required when filing their issues. This will make things
easier on the developers.
Initial text and changes by pabelanger. Tweaks and editing by myself.
David Vossel [Mon, 12 Apr 2010 14:47:16 +0000 (14:47 +0000)]
gives channel reference before unlocking it and using setvar helper.
To guarantee the channel is valid when calling setvar on the MASTER_CHANNEL
dialplan function, a channel reference must be taken before unlocking. Thanks
to russell for pointing out the error.
Mark Michelson [Fri, 9 Apr 2010 21:41:30 +0000 (21:41 +0000)]
Prevent crash when originating a call to a local channel.
Call completion code tries to grab the call completion parameters
from the requesting channel during local_request. When originating
a call to a local channel, however, this channel is NULL. This
was causing an issue for me when trying to run a test script.
projects / thirdparty / asterisk.git / log
