During socket release, sock_orphan() is called without considering that it
sets sk->sk_wq to NULL. Later, if SO_LINGER is enabled, this leads to a
null pointer dereferenced in virtio_transport_wait_close().
Orphan the socket only after transport release.
Partially reverts the 'Fixes:' commit.
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
lock_acquire+0x19e/0x500
_raw_spin_lock_irqsave+0x47/0x70
add_wait_queue+0x46/0x230
virtio_transport_release+0x4e7/0x7f0
__vsock_release+0xfd/0x490
vsock_release+0x90/0x120
__sock_release+0xa3/0x250
sock_close+0x14/0x20
__fput+0x35e/0xa90
__x64_sys_close+0x78/0xd0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Reported-by: syzbot+9d55b199192a4be7d02c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=9d55b199192a4be7d02c Fixes: fcdd2242c023 ("vsock: Keep the binding until socket destruction") Tested-by: Luigi Leonardi <leonardi@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Signed-off-by: Michal Luczaj <mhal@rbox.co> Link: https://patch.msgid.link/20250210-vsock-linger-nullderef-v3-1-ef6244d02b54@rbox.co Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Preserve sockets bindings; this includes both resulting from an explicit
bind() and those implicitly bound through autobind during connect().
Prevents socket unbinding during a transport reassignment, which fixes a
use-after-free:
1. vsock_create() (refcnt=1) calls vsock_insert_unbound() (refcnt=2)
2. transport->release() calls vsock_remove_bound() without checking if
sk was bound and moved to bound list (refcnt=1)
3. vsock_bind() assumes sk is in unbound list and before
__vsock_insert_bound(vsock_bound_sockets()) calls
__vsock_remove_bound() which does:
list_del_init(&vsk->bound_table); // nop
sock_put(&vsk->sk); // refcnt=0
BUG: KASAN: slab-use-after-free in __vsock_bind+0x62e/0x730
Read of size 4 at addr ffff88816b46a74c by task a.out/2057
dump_stack_lvl+0x68/0x90
print_report+0x174/0x4f6
kasan_report+0xb9/0x190
__vsock_bind+0x62e/0x730
vsock_bind+0x97/0xe0
__sys_bind+0x154/0x1f0
__x64_sys_bind+0x6e/0xb0
do_syscall_64+0x93/0x1b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
IORING_REGISTER_PBUF_RING can reuse an old struct io_buffer_list if it
was created for legacy selected buffer and has been emptied. It violates
the requirement that most of the field should stay stable after publish.
Always reallocate it instead.
To fix this issue, ensure that the spinlock is only used after it has been
properly initialized before using it in ufshcd_setup_clocks(). Do that
unconditionally as initializing a spinlock is a fast operation.
Fixes: 209f4e43b806 ("scsi: ufs: core: Introduce a new clock_gating lock") Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20250128071207.75494-2-avri.altman@wdc.com Reviewed-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With newly merged code the uprobe behaviour is slightly different
and affects uprobe consumer test.
We no longer need to check if the uprobe object is still preserved
after removing last uretprobe, because it stays as long as there's
pending/installed uretprobe instance.
This allows to run uretprobe consumers registered 'after' uprobe was
hit even if previous uretprobe got unregistered before being hit.
The uprobe object will be now removed after the last uprobe ref is
released and in such case it's held by ri->uprobe (return instance)
which is released after the uretprobe is hit.
Reported-by: Ihor Solodrai <ihor.solodrai@pm.me> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Ihor Solodrai <ihor.solodrai@pm.me> Closes: https://lore.kernel.org/bpf/w6U8Z9fdhjnkSp2UaFaV1fGqJXvfLEtDKEUyGDkwmoruDJ_AgF_c0FFhrkeKW18OqiP-05s9yDKiT6X-Ns-avN_ABf0dcUkXqbSJN1TQSXo=@pm.me/ Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we can see from the title, when I compiled the selftests/bpf, I
saw the error:
implicit declaration of function ‘gettid’ ; did you mean ‘getgid’? [-Werror=implicit-function-declaration]
skel->bss->tid = gettid();
^~~~~~
getgid
Directly call the syscall solves this issue.
Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Tested-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/r/20241029074627.80289-1-kerneljasonxing@gmail.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Cc: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__static_call_update_early() has a check for early_boot_irqs_disabled, but
is used before early_boot_irqs_disabled is set up in start_kernel().
Xen PV has always special cased early_boot_irqs_disabled, but Xen PVH does
not and falls over the BUG when booting as dom0.
It is very suspect that early_boot_irqs_disabled starts as 0, becomes 1 for
a time, then becomes 0 again, but as this needs backporting to fix a
breakage in a security fix, dropping the BUG_ON() is the far safer option.
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219620 Reported-by: Alex Zenla <alex@edera.dev> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Juergen Gross <jgross@suse.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Alex Zenla <alex@edera.dev> Link: https://lore.kernel.org/r/20241221211046.6475-1-andrew.cooper3@citrix.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After the netdevsim update to use human-readable IP address formats for
IPsec, we can now use the source and destination IPs directly in testing.
Here is the result:
# ./rtnetlink.sh -t kci_test_ipsec_offload
PASS: ipsec_offload
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20241010040027.21440-4-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit afd2627f727b ("tracing: Check "%s" dereference via the field and not the TP_printk format")
exposes potential UAFs in the xe_bo_move trace event.
Fix those by avoiding dereferencing the
xe_mem_type_to_name[] array at TP_printk time.
Since some code refactoring has taken place, explicit backporting may
be needed for kernels older than 6.10.
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit 7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed").
During suspend/resume process all connectors are explicitly disabled and
then reenabled. However resume fails because of the connector_status check:
[dpu error]connector not connected 3
[drm:drm_mode_config_helper_resume [drm_kms_helper]] *ERROR* Failed to resume (-22)
It doesn't make sense to check for the Writeback connected status (and
other drivers don't perform such check), so drop the check.
It wasn't a problem before the commit 71174f362d67 ("drm/msm/dpu: move
writeback's atomic_check to dpu_writeback.c"), since encoder's
atomic_check() is called under a different conditions that the
connector's atomic_check() (e.g. it is not called if there is no
connected CRTC or if the corresponding connector is not a part of the
new state).
Fixes: 71174f362d67 ("drm/msm/dpu: move writeback's atomic_check to dpu_writeback.c") Cc: stable@vger.kernel.org Reported-by: Leonard Lausen <leonard@lausen.nl> Closes: https://gitlab.freedesktop.org/drm/msm/-/issues/57 Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor Tested-by: György Kurucz <me@kuruczgy.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (sc7180)
Patchwork: https://patchwork.freedesktop.org/patch/627828/ Link: https://lore.kernel.org/r/20241209-dpu-fix-wb-v4-1-7fe93059f9e0@linaro.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IRQ indexes for the intf_6 underrun/vsync interrupts are swapped.
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16) is the actual underrun interrupt and
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17) is the vsync interrupt.
This causes timeout errors when using the DP2 controller, e.g.
[dpu error]enc37 frame done timeout
*ERROR* irq timeout id=37, intf_mode=INTF_MODE_VIDEO intf=6 wb=-1, pp=2, intr=0
*ERROR* wait disable failed: id:37 intf:6 ret:-110
Correct them to fix these errors and make DP2 work properly.
The driver checks for bit 16 (using CLOCKSET1_LOCK define) in CLOCKSET1
register when waiting for the PPI clock. However, the right bit to check
is bit 17 (CLOCKSET1_LOCK_PHY define). Not only that, but there's
nothing in the documents for bit 16 for V3U nor V4H.
So, fix the check to use bit 17, and drop the define for bit 16.
Fixes: 155358310f01 ("drm: rcar-du: Add R-Car DSI driver") Fixes: 11696c5e8924 ("drm: Place Renesas drivers in a separate dir") Cc: stable@vger.kernel.org Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241217-rcar-gh-dsi-v5-1-e77421093c05@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32
values that come from the user via the submit_lookup_cmds() function.
This addition could lead to an integer wrapping bug so use size_add()
to prevent that.
Fixes: 198725337ef1 ("drm/msm: fix cmdstream size check") Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/624696/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver does not touch the irqstatus register when it is disabling
interrupts. This might cause an interrupt to trigger for an interrupt
that was just disabled.
To fix the issue, clear the irqstatus registers right after disabling
the interrupts.
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org Reported-by: Jonathan Cormier <jcormier@criticallink.com> Closes: https://e2e.ti.com/support/processors-group/processors/f/processors-forum/1394222/am625-issue-about-tidss-rcu_preempt-self-detected-stall-on-cpu/5424479#5424479 Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
[Tomi: mostly rewrote the patch] Reviewed-by: Jonathan Cormier <jcormier@criticallink.com> Tested-by: Jonathan Cormier <jcormier@criticallink.com> Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-5-82ddaec94e4a@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver has a spinlock for protecting the irq_masks field and irq
enable registers. However, the driver misses protecting the irq status
registers which can lead to races.
Take the spinlock when accessing irqstatus too.
Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
[Tomi: updated the desc] Reviewed-by: Jonathan Cormier <jcormier@criticallink.com> Tested-by: Jonathan Cormier <jcormier@criticallink.com> Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-6-82ddaec94e4a@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It has been observed that sometimes DSS will trigger an interrupt and
the top level interrupt (DISPC_IRQSTATUS) is not zero, but the VP and
VID level interrupt-statuses are zero.
As the top level irqstatus is supposed to tell whether we have VP/VID
interrupts, the thinking of the driver authors was that this particular
case could never happen. Thus the driver only clears the DISPC_IRQSTATUS
bits which has corresponding interrupts in VP/VID status. So when this
issue happens, the driver will not clear DISPC_IRQSTATUS, and we get an
interrupt flood.
It is unclear why the issue happens. It could be a race issue in the
driver, but no such race has been found. It could also be an issue with
the HW. However a similar case can be easily triggered by manually
writing to DISPC_IRQSTATUS_RAW. This will forcibly set a bit in the
DISPC_IRQSTATUS and trigger an interrupt, and as the driver never clears
the bit, we get an interrupt flood.
To fix the issue, always clear DISPC_IRQSTATUS. The concern with this
solution is that if the top level irqstatus is the one that triggers the
interrupt, always clearing DISPC_IRQSTATUS might leave some interrupts
unhandled if VP/VID interrupt statuses have bits set. However, testing
shows that if any of the irqstatuses is set (i.e. even if
DISPC_IRQSTATUS == 0, but a VID irqstatus has a bit set), we will get an
interrupt.
Co-developed-by: Bin Liu <b-liu@ti.com> Signed-off-by: Bin Liu <b-liu@ti.com> Co-developed-by: Devarsh Thakkar <devarsht@ti.com> Signed-off-by: Devarsh Thakkar <devarsht@ti.com> Co-developed-by: Jonathan Cormier <jcormier@criticallink.com> Signed-off-by: Jonathan Cormier <jcormier@criticallink.com> Fixes: 32a1795f57ee ("drm/tidss: New driver for TI Keystone platform Display SubSystem") Cc: stable@vger.kernel.org Tested-by: Jonathan Cormier <jcormier@criticallink.com> Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-1-82ddaec94e4a@ideasonboard.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit ac325fc2aad5 ("btrfs: do not hold the extent lock for entire
read") we can now trigger a race between a task doing a direct IO write
and readahead. When this race is triggered it results in tasks getting
stale data when they attempt do a buffered read (including the task that
did the direct IO write).
This race can be sporadically triggered with test case generic/418, failing
like this:
generic/418 14s ... - output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad)
# --- tests/generic/418.out 2020-06-10 19:29:03.850519863 +0100
# +++ /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad 2025-02-03 15:42:36.974609476 +0000
@@ -1,2 +1,5 @@
QA output created by 418
+cmpbuf: offset 0: Expected: 0x1, got 0x0
+[6:0] FAIL - comparison failed, offset 24576
+diotest -wp -b 4096 -n 8 -i 4 failed at loop 3
Silence is golden
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/418.out /home/fdmanana/git/hub/xfstests/results//generic/418.out.bad' to see the entire diff)
Ran: generic/418
Failures: generic/418
Failed 1 of 1 tests
The race happens like this:
1) A file has a prealloc extent for the range [16K, 28K);
2) Task A starts a direct IO write against file range [24K, 28K).
At the start of the direct IO write it invalidates the page cache at
__iomap_dio_rw() with kiocb_invalidate_pages() for the 4K page at file
offset 24K;
3) Task A enters btrfs_dio_iomap_begin() and locks the extent range
[24K, 28K);
4) Task B starts a readahead for file range [16K, 28K), entering
btrfs_readahead().
First it attempts to read the page at offset 16K by entering
btrfs_do_readpage(), where it calls get_extent_map(), locks the range
[16K, 20K) and gets the extent map for the range [16K, 28K), caching
it into the 'em_cached' variable declared in the local stack of
btrfs_readahead(), and then unlocks the range [16K, 20K).
Since the extent map has the prealloc flag, at btrfs_do_readpage() we
zero out the page's content and don't submit any bio to read the page
from the extent.
Then it attempts to read the page at offset 20K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous page, we zero out the page's content since
the extent map has the prealloc flag set.
Then it attempts to read the page at offset 24K entering
btrfs_do_readpage() where we reuse the previously cached extent map
(decided by get_extent_map()) since it spans the page's range and
it's still in the inode's extent map tree.
Just like for the previous pages, we zero out the page's content since
the extent map has the prealloc flag set. Note that we didn't lock the
extent range [24K, 28K), so we didn't synchronize with the ongoing
direct IO write being performed by task A;
5) Task A enters btrfs_create_dio_extent() and creates an ordered extent
for the range [24K, 28K), with the flags BTRFS_ORDERED_DIRECT and
BTRFS_ORDERED_PREALLOC set;
6) Task A unlocks the range [24K, 28K) at btrfs_dio_iomap_begin();
7) The ordered extent enters btrfs_finish_one_ordered() and locks the
range [24K, 28K);
8) Task A enters fs/iomap/direct-io.c:iomap_dio_complete() and it tries
to invalidate the page at offset 24K by calling
kiocb_invalidate_post_direct_write(), resulting in a call chain that
ends up at btrfs_release_folio().
The btrfs_release_folio() call ends up returning false because the range
for the page at file offset 24K is currently locked by the task doing
the ordered extent completion in the previous step (7), so we have:
This last function checking that the range is locked and returning false
and propagating it up to btrfs_release_folio().
So this results in a failure to invalidate the page and
kiocb_invalidate_post_direct_write() triggers this message logged in
dmesg:
Page cache invalidation failure on direct I/O. Possible data corruption due to collision with buffered I/O!
After this we leave the page cache with stale data for the file range
[24K, 28K), filled with zeroes instead of the data written by direct IO
write (all bytes with a 0x01 value), so any task attempting to read with
buffered IO, including the task that did the direct IO write, will get
all bytes in the range with a 0x00 value instead of the written data.
Fix this by locking the range, with btrfs_lock_and_flush_ordered_range(),
at the two callers of btrfs_do_readpage() instead of doing it at
get_extent_map(), just like we did before commit ac325fc2aad5 ("btrfs: do
not hold the extent lock for entire read"), and unlocking the range after
all the calls to btrfs_do_readpage(). This way we never reuse a cached
extent map without flushing any pending ordered extents from a concurrent
direct IO write.
Fixes: ac325fc2aad5 ("btrfs: do not hold the extent lock for entire read") Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The double underscore naming scheme does not apply here, there's only
only get_extent_map(). As the definition is changed also pass the struct
btrfs_inode.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: acc18e1c1d8c ("btrfs: fix stale page cache after race between readahead and direct IO write") Signed-off-by: Sasha Levin <sashal@kernel.org>
Due to an interplay between locking in the input and hid transport subsystems,
attempting to register or deregister the relevant input devices during the
hidraw open/close events can lead to a lock ordering issue. Though this
shouldn't cause a deadlock, this commit moves the input device manipulation to
deferred work to sidestep the issue.
Fixes: 385a4886778f6 ("HID: steam: remove input device when a hid client is running.") Signed-off-by: Vicki Pfau <vi@endrift.com> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a force feedback command is sent from userspace, work is scheduled to pass
this data to the controller without blocking userspace itself. However, in
theory, this work might not be properly canceled if the controller is removed
at the exact right time. This patch ensures the work is properly canceled when
the device is removed.
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 139512191bd0 ("ipv4: use RCU protection in __ip_rt_update_pmtu()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Only amd_pstate_epp driver (i.e. cppc_state = ACTIVE) enters the
amd_pstate_epp_offline() and amd_pstate_epp_cpu_online() functions,
so remove the unnecessary if condition checking if cppc_state is
equal to AMD_PSTATE_ACTIVE.
Signed-off-by: Dhananjay Ugwekar <Dhananjay.Ugwekar@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://lore.kernel.org/r/20241204144842.164178-5-Dhananjay.Ugwekar@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Stable-dep-of: 3ace20038e19 ("cpufreq/amd-pstate: Fix cpufreq_policy ref counting") Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit addresses an issue where clk_gating.state is being toggled in
ufshcd_setup_clocks() even if clock gating is not allowed.
The fix is to add a check for hba->clk_gating.is_initialized before toggling
clk_gating.state in ufshcd_setup_clocks().
Since clk_gating.lock is now initialized unconditionally, it can no longer
lead to the spinlock being used before it is properly initialized, but
instead it is mostly for documentation purposes.
Fixes: 1ab27c9cf8b6 ("ufs: Add support for clock gating") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20250128071207.75494-3-avri.altman@wdc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Introduce a new clock gating lock to serialize access to some of the clock
gating members instead of the host_lock.
While at it, simplify the code with the guard() macro and co for automatic
cleanup of the new lock. There are some explicit
spin_lock_irqsave()/spin_unlock_irqrestore() snaking instances I left
behind because I couldn't make heads or tails of it.
Additionally, move the trace_ufshcd_clk_gating() call from inside the
region protected by the lock as it doesn't needs protection.
Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241124070808.194860-4-avri.altman@wdc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 839a74b5649c ("scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed") Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove hba->clk_gating.active_reqs check from ufshcd_is_ufs_dev_busy()
function to separate clock gating logic from general device busy checks.
Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241124070808.194860-3-avri.altman@wdc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 839a74b5649c ("scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed") Signed-off-by: Sasha Levin <sashal@kernel.org>
Prepare to remove hba->clk_gating.active_reqs check from
ufshcd_is_ufs_dev_busy().
Signed-off-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20241124070808.194860-2-avri.altman@wdc.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: 839a74b5649c ("scsi: ufs: Fix toggling of clk_gating.state when clock gating is not allowed") Signed-off-by: Sasha Levin <sashal@kernel.org>
The following bug report happened with a PREEMPT_RT kernel:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2012, name: kwatchdog
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
get_random_u32+0x4f/0x110
clocksource_verify_choose_cpus+0xab/0x1a0
clocksource_verify_percpu.part.0+0x6b/0x330
clocksource_watchdog_kthread+0x193/0x1a0
It is due to the fact that clocksource_verify_choose_cpus() is invoked with
preemption disabled. This function invokes get_random_u32() to obtain
random numbers for choosing CPUs. The batched_entropy_32 local lock and/or
the base_crng.lock spinlock in driver/char/random.c will be acquired during
the call. In PREEMPT_RT kernel, they are both sleeping locks and so cannot
be acquired in atomic context.
Fix this problem by using migrate_disable() to allow smp_processor_id() to
be reliably used without introducing atomic context. preempt_disable() is
then called after clocksource_verify_choose_cpus() but before the
clocksource measurement is being run to avoid introducing unexpected
latency.
Fixes: 7560c02bdffb ("clocksource: Check per-CPU clock synchronization when marked unstable") Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/all/20250131173323.891943-2-longman@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The "Checking clocksource synchronization" message is normally printed
when clocksource_verify_percpu() is called for a given clocksource if
both the CLOCK_SOURCE_UNSTABLE and CLOCK_SOURCE_VERIFY_PERCPU flags
are set.
It is an informational message and so pr_info() is the correct choice.
Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Acked-by: John Stultz <jstultz@google.com> Link: https://lore.kernel.org/all/20250125015442.3740588-1-longman@redhat.com
Stable-dep-of: 6bb05a33337b ("clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context") Signed-off-by: Sasha Levin <sashal@kernel.org>
Some lwtunnels have a dst cache for post-transformation dst.
If the packet destination did not change we may end up recording
a reference to the lwtunnel in its own cache, and the lwtunnel
state will never be freed.
Discovered by the ioam6.sh test, kmemleak was recently fixed
to catch per-cpu memory leaks. I'm not sure if rpl and seg6
can actually hit this, but in principle I don't see why not.
Fixes: 8cb3bf8bff3c ("ipv6: ioam: Add support for the ip6ip6 encapsulation") Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Fixes: a7a29f9c361f ("net: ipv6: add rpl sr tunnel") Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250130031519.2716843-2-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch mitigates the two-reallocations issue with rpl_iptunnel by
providing the dst_entry (in the cache) to the first call to
skb_cow_head(). As a result, the very first iteration would still
trigger two reallocations (i.e., empty cache), while next iterations
would only trigger a single reallocation.
Performance tests before/after applying this patch, which clearly shows
there is no impact (it even shows improvement):
- before: https://ibb.co/nQJhqwc
- after: https://ibb.co/4ZvW6wV
Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Cc: Alexander Aring <aahringo@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels") Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch mitigates the two-reallocations issue with seg6_iptunnel by
providing the dst_entry (in the cache) to the first call to
skb_cow_head(). As a result, the very first iteration would still
trigger two reallocations (i.e., empty cache), while next iterations
would only trigger a single reallocation.
Performance tests before/after applying this patch, which clearly shows
the improvement:
- before: https://ibb.co/3Cg4sNH
- after: https://ibb.co/8rQ350r
Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Cc: David Lebrun <dlebrun@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels") Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch mitigates the two-reallocations issue with ioam6_iptunnel by
providing the dst_entry (in the cache) to the first call to
skb_cow_head(). As a result, the very first iteration may still trigger
two reallocations (i.e., empty cache), while next iterations would only
trigger a single reallocation.
Performance tests before/after applying this patch, which clearly shows
the improvement:
- inline mode:
- before: https://ibb.co/LhQ8V63
- after: https://ibb.co/x5YT2bS
- encap mode:
- before: https://ibb.co/3Cjm5m0
- after: https://ibb.co/TwpsxTC
- encap mode with tunsrc:
- before: https://ibb.co/Gpy9QPg
- after: https://ibb.co/PW1bZFT
This patch also fixes an incorrect behavior: after the insertion, the
second call to skb_cow_head() makes sure that the dev has enough
headroom in the skb for layer 2 and stuff. In that case, the "old"
dst_entry was used, which is now fixed. After discussing with Paolo, it
appears that both patches can be merged into a single one -this one-
(for the sake of readability) and target net-next.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels") Signed-off-by: Sasha Levin <sashal@kernel.org>
Add static inline dst_dev_overhead() function to include/net/dst.h. This
helper function is used by ioam6_iptunnel, rpl_iptunnel and
seg6_iptunnel to get the dev's overhead based on a cache entry
(dst_entry). If the cache is empty, the default and generic value
skb->mac_len is returned. Otherwise, LL_RESERVED_SPACE() over dst's dev
is returned.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be> Cc: Alexander Lobakin <aleksander.lobakin@intel.com> Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and ioam6 lwtunnels") Signed-off-by: Sasha Levin <sashal@kernel.org>
At btrfs_write_check() if our file's i_size is not sector size aligned and
we have a write that starts at an offset larger than the i_size that falls
within the same page of the i_size, then we end up not zeroing the file
range [i_size, write_offset).
ret = btrfs_cont_expand(BTRFS_I(inode), oldsize, end_pos);
if (ret)
return ret;
}
So if our file's i_size is 90269 bytes and a write at offset 90365 bytes
comes in, we get 'start_pos' set to 90112 bytes, which is less than the
i_size and therefore we don't zero out the range [90269, 90365) by
calling btrfs_cont_expand().
This is an old bug introduced in commit 9036c10208e1 ("Btrfs: update hole
handling v2"), from 2008, and the buggy code got moved around over the
years.
Fix this by discarding 'start_pos' and comparing against the write offset
('pos') without any alignment.
This bug was recently exposed by test case generic/363 which tests this
scenario by polluting ranges beyond EOF with an mmap write and than verify
that after a file increases we get zeroes for the range which is supposed
to be a hole and not what we wrote with the previous mmaped write.
We're only seeing this exposed now because generic/363 used to run only
on xfs until last Sunday's fstests update.
generic/363 0s ... [failed, exit status 1]- output mismatch (see /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad)
# --- tests/generic/363.out 2025-02-05 15:31:14.013646509 +0000
# +++ /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad 2025-02-05 17:25:33.112630781 +0000
@@ -1 +1,46 @@
QA output created by 363
+READ BAD DATA: offset = 0xdcad, size = 0xd921, fname = /home/fdmanana/btrfs-tests/dev/junk
+OFFSET GOOD BAD RANGE
+0x1609d 0x0000 0x3104 0x0
+operation# (mod 256) for the bad data may be 4
+0x1609e 0x0000 0x0472 0x1
+operation# (mod 256) for the bad data may be 4
...
(Run 'diff -u /home/fdmanana/git/hub/xfstests/tests/generic/363.out /home/fdmanana/git/hub/xfstests/results//generic/363.out.bad' to see the entire diff)
Ran: generic/363
Failures: generic/363
Failed 1 of 1 tests
Add a check for the return value of mlxsw_sp_port_get_stats_raw()
in __mlxsw_sp_port_get_stats(). If mlxsw_sp_port_get_stats_raw()
returns an error, exit the function to prevent further processing
with potentially invalid data.
Fixes: 614d509aa1e7 ("mlxsw: Move ethtool_ops to spectrum_ethtool.c") Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://patch.msgid.link/20250212152311.1332-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The netfs library could break down a read request into
multiple subrequests. When multichannel is used, there is
potential to improve performance when each of these
subrequests pick a different channel.
Today we call cifs_pick_channel when the main read request
is initialized in cifs_init_request. This change moves this to
cifs_prepare_read, which is the right place to pick channel since
it gets called for each subrequest.
Interestingly cifs_prepare_write already does channel selection
for individual subreq, but looks like it was missed for read.
This is especially important when multichannel is used with
increased rasize.
In my test setup, with rasize set to 8MB, a sequential read
of large file was taking 11.5s without this change. With the
change, it completed in 9s. The difference is even more signigicant
with bigger rasize.
Cc: <stable@vger.kernel.org> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set the buffer type to IGC_TX_BUFFER_TYPE_SKB for empty frame in the
igc_init_empty_frame function. This ensures that the buffer type is
correctly identified and handled during Tx ring cleanup.
Fixes: db0b124f02ba ("igc: Enhance Qbv scheduling by using first flag bit") Cc: stable@vger.kernel.org # 6.2+ Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For hs400(es) mode, the 'hs400-ds-delay' is typically configured in the
dts. However, some projects may only define 'mediatek,hs400-ds-dly3',
which can lead to initialization failures in hs400es mode. CMD13 reported
response crc error in the mmc_switch_status() just after switching to
hs400es mode.
Currently, the hs400_ds_dly3 value is set within the tuning function. This
means that the PAD_DS_DLY3 field is not configured before tuning process,
which is the reason for the above-mentioned CMD13 response crc error.
Move the PAD_DS_DLY3 field configuration into msdc_prepare_hs400_tuning(),
and add a value check of hs400_ds_delay to prevent overwriting by zero when
the 'hs400-ds-delay' is not set in the dts. In addition, since hs400(es)
only tune the PAD_DS_DLY1, the PAD_DS_DLY2_SEL bit should be cleared to
bypass it.
Fixes: c4ac38c6539b ("mmc: mtk-sd: Add HS400 online tuning support") Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250123092644.7359-1-andy-ld.lu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent LLVM commit [1] started generating an .ARM.attributes section
similar to the one that exists for 32-bit, which results in orphan
section warnings (or errors if CONFIG_WERROR is enabled) from the linker
because it is not handled in the arm64 linker scripts.
ld.lld: error: arch/arm64/kernel/vdso/vgettimeofday.o:(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: arch/arm64/kernel/vdso/vgetrandom.o:(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: vmlinux.a(lib/vsprintf.o):(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: vmlinux.a(lib/win_minmax.o):(.ARM.attributes) is being placed in '.ARM.attributes'
ld.lld: error: vmlinux.a(lib/xarray.o):(.ARM.attributes) is being placed in '.ARM.attributes'
Discard the new sections in the necessary linker scripts to resolve the
warnings, as the kernel and vDSO do not need to retain it, similar to
the .note.gnu.property section.
The iopf_queue_remove_device() helper removes a device from the per-iommu
iopf queue when PRI is disabled on the device. It responds to all
outstanding iopf's with an IOMMU_PAGE_RESP_INVALID code and detaches the
device from the queue.
However, it fails to release the group structure that represents a group
of iopf's awaiting for a response after responding to the hardware. This
can cause a memory leak if iopf_queue_remove_device() is called with
pending iopf's.
Fix it by calling iopf_free_group() after the iopf group is responded.
Fixes: 199112327135 ("iommu: Track iopf group instead of last fault") Cc: stable@vger.kernel.org Suggested-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20250117055800.782462-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
scx_move_task() is called from sched_move_task() and tells the BPF scheduler
that cgroup migration is being committed. sched_move_task() is used by both
cgroup and autogroup migrations and scx_move_task() tried to filter out
autogroup migrations by testing the destination cgroup and PF_EXITING but
this is not enough. In fact, without explicitly tagging the thread which is
doing the cgroup migration, there is no good way to tell apart
scx_move_task() invocations for racing migration to the root cgroup and an
autogroup migration.
This led to scx_move_task() incorrectly ignoring a migration from non-root
cgroup to an autogroup of the root cgroup triggering the following warning:
Fix it by adding an argument to sched_move_task() that indicates whether the
moving is for a cgroup or autogroup migration. After the change,
scx_move_task() is called only for cgroup migrations and renamed to
scx_cgroup_move_task().
- The bailout for a bad partoffset must use put_dev_sector(), since the
preceding read_part_sector() succeeded.
- If the partition table claims a silly sector size like 0xfff bytes
(which results in partition table entries straddling sector boundaries),
bail out instead of accessing out-of-bounds memory.
- We must not assume that the partition table contains proper NUL
termination - use strnlen() and strncmp() instead of strlen() and
strcmp().
The stmpe_reg_read function can fail, but its return value is not checked
in stmpe_gpio_irq_sync_unlock. This can lead to silent failures and
incorrect behavior if the hardware access fails.
This patch adds checks for the return value of stmpe_reg_read. If the
function fails, an error message is logged and the function returns
early to avoid further issues.
Fixes: b888fb6f2a27 ("gpio: stmpe: i2c transfer are forbiden in atomic context") Cc: stable@vger.kernel.org # 4.16+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20250212021849.275-1-vulab@iscas.ac.cn Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spurious immediate wake up events are reported on Acer Nitro ANV14. GPIO 11 is
specified as an edge triggered input and also a wake source but this pin is
supposed to be an output pin for an LED, so it's effectively floating.
Block the interrupt from getting set up for this GPIO on this device.
In contrast to the commit message of the fixed commit VFs whose parent
PF is not configured are not always isolated, that is put on their own
PCI domain. This is because for VFs to be added to an existing PCI
domain it is enough for that PCI domain to share the same topology ID or
PCHID. Such a matching PCI domain without a parent PF may exist when
a PF from the same PCI card created the domain with the VF being a child
of a different, non accessible, PF. While not causing technical issues
it makes the rules which VFs are isolated inconsistent.
Fix this by explicitly checking that the parent PF exists on the PCI
domain determined by the topology ID or PCHID before registering the VF.
This works because a parent PF which is under control of this Linux
instance must be enabled and configured at the point where its child VFs
appear because otherwise SR-IOV could not have been enabled on the
parent.
This creates a new zpci_iov_find_parent_pf() function which a future
commit can use to find if a VF has a configured parent PF. Use
zdev->rid instead of zdev->devfn such that the new function can be used
before it has been decided if the RID will be exposed and zdev->devfn is
set. Also handle the hypotheical case that the RID is not available but
there is an otherwise matching zbus.
do_page_fault() and do_entUna() are special because they use
non-standard stack frame layout. Fix them manually.
Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Magnus Lindholm <linmag7@gmail.com> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows the assembly in entry.S to automatically keep in sync with
changes in the stack layout (struct pt_regs and struct switch_stack).
Cc: stable@vger.kernel.org Tested-by: Maciej W. Rozycki <macro@orcam.me.uk> Tested-by: Matt Turner <mattst88@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Ivan Kokshaysky <ink@unseen.parts> Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
The documentation of the __uart_read_properties() states that
->iotype member is always altered after the function call, but
the code doesn't do that in the case when use_defaults == false
and the value of reg-io-width is unsupported. Make sure the code
follows the documentation.
Note, the current users of the uart_read_and_validate_port_properties()
will fail and the change doesn't affect their behaviour, neither
users of uart_read_port_properties() will be affected since the
alteration happens there even in the current code flow.
Fixes: e894b6005dce ("serial: port: Introduce a common helper to read properties") Cc: stable <stable@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250124161530.398361-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the ->iotype is always assigned to the UPIO_MEM when
the respective property is not found. However, this will not
support the cases when user wants to have UPIO_PORT to be set
or preserved. Support this scenario by checking ->iobase value
and default the ->iotype respectively.
Fixes: 1117a6fdc7c1 ("serial: 8250_of: Switch to use uart_read_port_properties()") Fixes: e894b6005dce ("serial: port: Introduce a common helper to read properties") Cc: stable <stable@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250124161530.398361-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun reported the following race between fork() and cgroup.kill at [1].
Tejun:
I was looking at cgroup.kill implementation and wondering whether there
could be a race window. So, __cgroup_kill() does the following:
k1. Set CGRP_KILL.
k2. Iterate tasks and deliver SIGKILL.
k3. Clear CGRP_KILL.
The copy_process() does the following:
c1. Copy a bunch of stuff.
c2. Grab siglock.
c3. Check fatal_signal_pending().
c4. Commit to forking.
c5. Release siglock.
c6. Call cgroup_post_fork() which puts the task on the css_set and tests
CGRP_KILL.
The intention seems to be that either a forking task gets SIGKILL and
terminates on c3 or it sees CGRP_KILL on c6 and kills the child. However, I
don't see what guarantees that k3 can't happen before c6. ie. After a
forking task passes c5, k2 can take place and then before the forking task
reaches c6, k3 can happen. Then, nobody would send SIGKILL to the child.
What am I missing?
This is indeed a race. One way to fix this race is by taking
cgroup_threadgroup_rwsem in write mode in __cgroup_kill() as the fork()
side takes cgroup_threadgroup_rwsem in read mode from cgroup_can_fork()
to cgroup_post_fork(). However that would be heavy handed as this adds
one more potential stall scenario for cgroup.kill which is usually
called under extreme situation like memory pressure.
To fix this race, let's maintain a sequence number per cgroup which gets
incremented on __cgroup_kill() call. On the fork() side, the
cgroup_can_fork() will cache the sequence number locally and recheck it
against the cgroup's sequence number at cgroup_post_fork() site. If the
sequence numbers mismatch, it means __cgroup_kill() can been called and
we should send SIGKILL to the newly created task.
Starting with Rust 1.86.0 (to be released 2025-04-03), Clippy will have
a new lint, `doc_overindented_list_items` [1], which catches cases of
overindented list items.
The lint has been added by Yutaro Ohno, based on feedback from the kernel
[2] on a patch that fixed a similar case -- commit 0c5928deada1 ("rust:
block: fix formatting in GenDisk doc").
Clippy reports a few cases in the kernel, apart from the one already
fixed in the commit above. One is this one:
error: doc list item overindented
--> rust/kernel/rbtree.rs:1152:5
|
1152 | /// null, it is a pointer to the root of the [`RBTree`].
| ^^^^ help: try using ` ` (2 spaces)
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_overindented_list_items
= note: `-D clippy::doc-overindented-list-items` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::doc_overindented_list_items)]`
Starting with Rust 1.85.0 (currently in beta, to be released 2025-02-20),
under some kernel configurations with `CONFIG_RUST_DEBUG_ASSERTIONS=y`,
one may trigger a new `objtool` warning:
rust/kernel.o: warning: objtool: _R...securityNtB2_11SecurityCtx8as_bytes()
falls through to next function _R...core3ops4drop4Drop4drop()
due to a call to the `noreturn` symbol:
core::panicking::assert_failed::<usize, usize>
Thus add it to the list so that `objtool` knows it is actually `noreturn`.
Do so matching with `strstr` since it is a generic.
See commit 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs). Fixes: 56d680dd23c3 ("objtool/rust: list `noreturn` Rust functions") Reviewed-by: Gary Guo <gary@garyguo.net> Link: https://lore.kernel.org/r/20250112143951.751139-1-ojeda@kernel.org
[ Updated Cc: stable@ to include 6.13.y. - Miguel ] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Starting with Rust 1.85.0 (to be released 2025-02-20), `rustc` warns
[1] about disabling neon in the aarch64 hardfloat target:
warning: target feature `neon` cannot be toggled with
`-Ctarget-feature`: unsound on hard-float targets
because it changes float ABI
|
= note: this was previously accepted by the compiler but
is being phased out; it will become a hard error
in a future release!
= note: for more information, see issue #116344
<https://github.com/rust-lang/rust/issues/116344>
Thus, instead, use the softfloat target instead.
While trying it out, I found that the kernel sanitizers were not enabled
for that built-in target [2]. Upstream Rust agreed to backport
the enablement for the current beta so that it is ready for
the 1.85.0 release [3] -- thanks!
However, that still means that before Rust 1.85.0, we cannot switch
since sanitizers could be in use. Thus conditionally do so.
UEFI 2.11 introduced EFI_MEMORY_HOT_PLUGGABLE to annotate system memory
regions that are 'cold plugged' at boot, i.e., hot pluggable memory that
is available from early boot, and described as system RAM by the
firmware.
Existing loaders and EFI applications running in the boot context will
happily use this memory for allocating data structures that cannot be
freed or moved at runtime, and this prevents the memory from being
unplugged. Going forward, the new EFI_MEMORY_HOT_PLUGGABLE attribute
should be tested, and memory annotated as such should be avoided for
such allocations.
In the EFI stub, there are a couple of occurrences where, instead of the
high-level AllocatePages() UEFI boot service, a low-level code sequence
is used that traverses the EFI memory map and carves out the requested
number of pages from a free region. This is needed, e.g., for allocating
as low as possible, or for allocating pages at random.
While AllocatePages() should presumably avoid special purpose memory and
cold plugged regions, this manual approach needs to incorporate this
logic itself, in order to prevent the kernel itself from ending up in a
hot unpluggable region, preventing it from being unplugged.
So add the EFI_MEMORY_HOTPLUGGABLE macro definition, and check for it
where appropriate.
scripts/Makefile.clang was changed in the linked commit to move --target from
KBUILD_CFLAGS to KBUILD_CPPFLAGS, as that generally has a broader scope.
However that variable is not inspected by the userprogs logic,
breaking cross compilation on clang.
Use both variables to detect bitsize and target arguments for userprogs.
The Mediatek MT7922 WiFi device advertises FLR support, but it apparently
does not work, and all subsequent config reads return ~0:
pci 0000:01:00.0: [14c3:0616] type 00 class 0x028000 PCIe Endpoint
pciback 0000:01:00.0: not ready 65535ms after FLR; giving up
After an FLR, pci_dev_wait() waits for the device to become ready. Prior
to d591f6804e7e ("PCI: Wait for device readiness with Configuration RRS"),
it polls PCI_COMMAND until it is something other that PCI_POSSIBLE_ERROR
(~0). If it times out, pci_dev_wait() returns -ENOTTY and
__pci_reset_function_locked() tries the next available reset method.
Typically this is Secondary Bus Reset, which does work, so the MT7922 is
eventually usable.
After d591f6804e7e, if Configuration Request Retry Status Software
Visibility (RRS SV) is enabled, pci_dev_wait() polls PCI_VENDOR_ID until it
is something other than the special 0x0001 Vendor ID that indicates a
completion with RRS status.
When RRS SV is enabled, reads of PCI_VENDOR_ID should return either 0x0001,
i.e., the config read was completed with RRS, or a valid Vendor ID. On the
MT7922, it seems that all config reads after FLR return ~0 indefinitely.
When pci_dev_wait() reads PCI_VENDOR_ID and gets 0xffff, it assumes that's
a valid Vendor ID and the device is now ready, so it returns with success.
After pci_dev_wait() returns success, we restore config space and continue.
Since the MT7922 is not actually ready after the FLR, the restore fails and
the device is unusable.
We considered changing pci_dev_wait() to continue polling if a
PCI_VENDOR_ID read returns either 0x0001 or 0xffff. This "works" as it did
before d591f6804e7e, although we have to wait for the timeout and then fall
back to SBR. But it doesn't work for SR-IOV VFs, which *always* return
0xffff as the Vendor ID.
Mark Mediatek MT7922 WiFi devices to avoid the use of FLR completely. This
will cause fallback to another reset method, such as SBR.
In the US country code, to avoid including 6 GHz rules in the 5 GHz rules
list, the number of 5 GHz rules is set to a default constant value of 4
(REG_US_5G_NUM_REG_RULES). However, if there are more than 4 valid 5 GHz
rules, the current logic will bypass the legitimate 6 GHz rules.
For example, if there are 5 valid 5 GHz rules and 1 valid 6 GHz rule, the
current logic will only consider 4 of the 5 GHz rules, treating the last
valid rule as a 6 GHz rule. Consequently, the actual 6 GHz rule is never
processed, leading to the eventual disabling of 6 GHz channels.
To fix this issue, instead of hardcoding the value to 4, use a helper
function to determine the number of 6 GHz rules present in the 5 GHz rules
list and ignore only those rules.
The problem is that GCC expects 16-byte alignment of the incoming stack
since early 2004, as Maciej found out [1]:
Having actually dug speculatively I can see that the psABI was changed in
GCC 3.5 with commit e5e10fb4a350 ("re PR target/14539 (128-bit long double
improperly aligned)") back in Mar 2004, when the stack pointer alignment
was increased from 8 bytes to 16 bytes, and arch/alpha/kernel/entry.S has
various suspicious stack pointer adjustments, starting with SP_OFF which
is not a whole multiple of 16.
Also, as Magnus noted, "ALPHA Calling Standard" [2] required the same:
D.3.1 Stack Alignment
This standard requires that stacks be octaword aligned at the time a
new procedure is invoked.
However:
- the "normal" kernel stack is always misaligned by 8 bytes, thanks to
the odd number of 64-bit words in 'struct pt_regs', which is the very
first thing pushed onto the kernel thread stack;
- syscall, fault, interrupt etc. handlers may, or may not, receive aligned
stack depending on numerous factors.
Somehow we got away with it until recently, when we ended up with
a stack corruption in kernel/smp.c:smp_call_function_single() due to
its use of 32-byte aligned local data and the compiler doing clever
things allocating it on the stack.
This adds padding between the PAL-saved and kernel-saved registers
so that 'struct pt_regs' have an even number of 64-bit words.
This makes the stack properly aligned for most of the kernel
code, except two handlers which need special threatment.
Note: struct pt_regs doesn't belong in uapi/asm; this should be fixed,
but let's put this off until later.
The driver assumed that es58x_dev->udev->serial could never be NULL.
While this is true on commercially available devices, an attacker
could spoof the device identity providing a NULL USB serial number.
That would trigger a NULL pointer dereference.
Add a check on es58x_dev->udev->serial before accessing it.
Reported-by: yan kang <kangyan91@outlook.com> Reported-by: yue sun <samsun1006219@gmail.com> Closes: https://lore.kernel.org/linux-can/SY8P300MB0421E0013C0EBD2AA46BA709A1F42@SY8P300MB0421.AUSP300.PROD.OUTLOOK.COM/ Fixes: 9f06631c3f1f ("can: etas_es58x: export product information through devlink_ops::info_get()") Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250204154859.9797-2-mailhol.vincent@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The J1939 standard requires the transmission of messages of length 0.
For example proprietary messages are specified with a data length of 0
to 1785. The transmission of such messages is not possible. Sending
results in no error being returned but no corresponding can frame
being generated.
Enable the transmission of zero length J1939 messages. In order to
facilitate this two changes are necessary:
1) If the transmission of a new message is requested from user space
the message is segmented in j1939_sk_send_loop(). Let the segmentation
take into account zero length messages, do not terminate immediately,
queue the corresponding skb.
2) j1939_session_skb_get_by_offset() selects the next skb to transmit
for a session. Take into account that there might be zero length skbs
in the queue.
Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250205174651.103238-1-alexander.hoelzl@gmx.net Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: stable@vger.kernel.org
[mkl: commit message rephrased] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Runtime PM is enabled as one of the last steps of probe(), so all
earlier gotos to "exit_free_device" label were not correct and were
leading to unbalanced runtime PM disable depth.
Fixes: 6e2fe01dd6f9 ("can: c_can: move runtime PM enable/disable to c_can_platform") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250112-syscon-phandle-args-can-v1-1-314d9549906f@linaro.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If skb allocation fails, the pointer to struct can_frame is NULL. This
is actually handled everywhere inside ctucan_err_interrupt() except for
the only place.
Add the missed NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Pavel Pisa <pisa@cmp.felk.cvut.cz> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://patch.msgid.link/20250114152138.139580-1-pchelkin@ispras.ru Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
