This patch addresses an issue where authentication failures were being
erroneously reported due to negative test failures in the "ccm(aes)"
selftest.
pr_debug suppress unnecessary screaming of these tests.
The script previously assumed --file was always the first argument,
which caused issues when it appeared later. This patch updates the
parsing logic to scan all arguments to find --file, sets the config
file correctly, and resets the argument list with the remaining
commands.
It also fixes --refresh to respect --file by passing KCONFIG_CONFIG=$FN
to make oldconfig.
Add a stub for mt6359_accdet_enable_jack_detect() to prevent linker
failures in the machine sound drivers calling it when
CONFIG_SND_SOC_MT6359_ACCDET is not enabled.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://patch.msgid.link/20250306-mt8188-accdet-v3-3-7828e835ff4b@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is only used to write a new NVM in order to upgrade the retimer
firmware. It does not make sense to expose it if upgrade is disabled.
This also makes it consistent with the router NVM upgrade.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
- Move tcp_count_delivered() earlier and split tcp_count_delivered_ce()
out of it
- Move tcp_in_ack_event() later
- While at it, remove the inline from tcp_in_ack_event() and let
the compiler to decide
Accurate ECN's heuristics does not know if there is going
to be ACE field based CE counter increase or not until after
rtx queue has been processed. Only then the number of ACKed
bytes/pkts is available. As CE or not affects presence of
FLAG_ECE, that information for tcp_in_ack_event is not yet
available in the old location of the call to tcp_in_ack_event().
Signed-off-by: Ilpo Järvinen <ij@kernel.org> Signed-off-by: Chia-Yu Chang <chia-yu.chang@nokia-bell-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Return prog's btf_id from bpf_prog_get_info_by_fd regardless of capable
check. This patch enables scenario, when freplace program, running
from user namespace, requires to query target prog's btf.
Some systems report INTx as not routed by setting pdev->irq to
IRQ_NOTCONNECTED, resulting in a -ENOTCONN error when trying to
setup eventfd signaling. Include this in the set of conditions
for which the PIN register is virtualized to zero.
Additionally consolidate vfio_pci_get_irq_count() to use this
virtualized value in reporting INTx support via ioctl and sanity
checking ioctl paths since pdev->irq is re-used when the device
is in MSI mode.
The combination of these results in both the config space of the
device and the ioctl interface behaving as if the device does not
support INTx.
In the days when SCSI-2 was emerging, some drives did claim SCSI-2 but did
not correctly implement it. The st driver first tries MODE SELECT with the
page format bit set to set the block descriptor. If not successful, the
non-page format is tried.
The test only tests the sense code and this triggers also from illegal
parameter in the parameter list. The test is limited to "old" devices and
made more strict to remove false alarms.
capable() calls refer to enabled LSMs whether to permit or deny the
request. This is relevant in connection with SELinux, where a
capability check results in a policy decision and by default a denial
message on insufficient permission is issued.
It can lead to three undesired cases:
1. A denial message is generated, even in case the operation was an
unprivileged one and thus the syscall succeeded, creating noise.
2. To avoid the noise from 1. the policy writer adds a rule to ignore
those denial messages, hiding future syscalls, where the task
performs an actual privileged operation, leading to hidden limited
functionality of that task.
3. To avoid the noise from 1. the policy writer adds a rule to permit
the task the requested capability, while it does not need it,
violating the principle of least privilege.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250302160657.127253-2-cgoettsche@seltendoof.de Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
When uml_reserved is updated, min_low_pfn must also be updated
accordingly. Otherwise, min_low_pfn will not accurately reflect
the lowest available PFN.
Doing this allows using registers as retrieved from an mcontext to be
pushed to a process using PTRACE_SETREGS.
It is not entirely clear to me why CSGSFS was masked. Doing so creates
issues when using the mcontext as process state in seccomp and simply
copying the register appears to work perfectly fine for ptrace.
The controller driver nacked the master request but didn't emit a
STOP to end the transaction. The driver shall refuse the unsupported
requests and return the controller state to IDLE by emitting a STOP.
Signed-off-by: Stanley Chu <yschu@nuvoton.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250318053606.3087121-4-yschu@nuvoton.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[WHY]
We should never apply a minimum dispclk value while in
prepare_bandwidth or while displays are active. This is
always an optimizaiton for when all displays are disabled.
[HOW]
Defer dispclk optimization until safe_to_lower = true
and display_count reaches 0.
Since 0 has a special value in this logic (ie. no dispclk
required) we also need adjust the logic that clamps it for
the actual request to PMFW.
Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <chris.park@amd.com> Reviewed-by: Eric Yang <eric.yang@amd.com> Signed-off-by: Jing Zhou <Jing.Zhou@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When attempting to build a too long path we are currently returning
-ENOMEM, which is very odd and misleading. So update fs_path_ensure_buf()
to return -ENAMETOOLONG instead. Also, while at it, move the WARN_ON()
into the if statement's expression, as it makes it clear what is being
tested and also has the effect of adding 'unlikely' to the statement,
which allows the compiler to generate better code as this condition is
never expected to happen.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At btrfs_reclaim_bgs_work(), we are grabbing a block group's zone unusable
bytes while not under the protection of the block group's spinlock, so
this can trigger race reports from KCSAN (or similar tools) since that
field is typically updated while holding the lock, such as at
__btrfs_add_free_space_zoned() for example.
Fix this by grabbing the zone unusable bytes while we are still in the
critical section holding the block group's spinlock, which is right above
where we are currently grabbing it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
At close_ctree() after we have ran delayed iputs either explicitly through
calling btrfs_run_delayed_iputs() or later during the call to
btrfs_commit_super() or btrfs_error_commit_super(), we assert that the
delayed iputs list is empty.
We have (another) race where this assertion might fail because we have
queued an async write into the fs_info->workers workqueue. Here's how it
happens:
1) We are submitting a data bio for an inode that is not the data
relocation inode, so we call btrfs_wq_submit_bio();
2) btrfs_wq_submit_bio() submits a work for the fs_info->workers queue
that will run run_one_async_done();
3) We enter close_ctree(), flush several work queues except
fs_info->workers, explicitly run delayed iputs with a call to
btrfs_run_delayed_iputs() and then again shortly after by calling
btrfs_commit_super() or btrfs_error_commit_super(), which also run
delayed iputs;
4) run_one_async_done() is executed in the work queue, and because there
was an IO error (bio->bi_status is not 0) it calls btrfs_bio_end_io(),
which drops the final reference on the associated ordered extent by
calling btrfs_put_ordered_extent() - and that adds a delayed iput for
the inode;
5) At close_ctree() we find that after stopping the cleaner and
transaction kthreads the delayed iputs list is not empty, failing the
following assertion:
ASSERT(list_empty(&fs_info->delayed_iputs));
Fix this by flushing the fs_info->workers workqueue before running delayed
iputs at close_ctree().
David reported this when running generic/648, which exercises IO error
paths by using the DM error table.
Reported-by: David Sterba <dsterba@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[BUG]
Even after all the error fixes related the
"ASSERT(list_empty(&fs_info->delayed_iputs));" in close_ctree(), I can
still hit it reliably with my experimental 2K block size.
[CAUSE]
In my case, all the error is triggered after the fs is already in error
status.
I find the following call trace to be the cause of race:
The root cause is that, btrfs_wait_ordered_roots() only wait for
ordered extents to finish their IOs, not to wait for them to finish and
removed.
[FIX]
Since btrfs_error_commit_super() will flush and wait for all ordered
extents, it should be executed early, before we start flushing the
workqueues.
And since btrfs_error_commit_super() now runs early, there is no need to
run btrfs_run_delayed_iputs() inside it, so just remove the
btrfs_run_delayed_iputs() call from btrfs_error_commit_super().
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The inline function btrfs_is_testing() is hardcoded to return 0 if
CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set. Currently we're relying on
the compiler optimizing out the call to alloc_test_extent_buffer() in
btrfs_find_create_tree_block(), as it's not been defined (it's behind an
#ifdef).
Add a stub version of alloc_test_extent_buffer() to avoid linker errors
on non-standard optimization levels. This problem was seen on GCC 14
with -O0 and is helps to see symbols that would be otherwise optimized
out.
Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Mark Harmstone <maharmstone@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the async discard machinery owns a ref to the block_group
when the block_group is queued on a discard list. However, to handle
races with discard cancellation and the discard workfn, we have a
specific logic to detect that the block_group is *currently* running in
the workfn, to protect the workfn's usage amidst cancellation.
As far as I can tell, this doesn't have any overt bugs (though
finish_discard_pass() and remove_from_discard_list() racing can have a
surprising outcome for the caller of remove_from_discard_list() in that
it is again added at the end).
But it is needlessly complicated to rely on locking and the nullity of
discard_ctl->block_group. Simplify this significantly by just taking a
refcount while we are in the workfn and unconditionally drop it in both
the remove and workfn paths, regardless of if they race.
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Boris Burkov <boris@bur.io> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the I2C QUP controller is used together with a DMA engine it needs
to vote for the interconnect path to the DRAM. Otherwise it may be
unable to access the memory quickly enough.
The requested peak bandwidth is dependent on the I2C core clock.
To avoid sending votes too often the bandwidth is always requested when
a DMA transfer starts, but dropped only on runtime suspend. Runtime
suspend should only happen if no transfer is active. After resumption we
can defer the next vote until the first DMA transfer actually happens.
The implementation is largely identical to the one introduced for
spi-qup in commit ecdaa9473019 ("spi: qup: Vote for interconnect
bandwidth to DRAM") since both drivers represent the same hardware
block.
At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of
contiguous free memory available at this point, the kernel will crash
and burn because memblock_phys_alloc_range() returns 0 on failure,
which leads memblock_phys_free() to throw the first 4 MiB of physical
memory to the wolves.
At a minimum it should fail gracefully with a meaningful diagnostic,
but in fact everything seems to work fine without the weird reserve
allocation.
Signed-off-by: Philip Redkin <me@rarity.fan> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Link: https://lore.kernel.org/r/94b3e98f-96a7-3560-1f76-349eb95ccf7f@rarity.fan Signed-off-by: Sasha Levin <sashal@kernel.org>
The SD spec version 6.0 section 6.4.1.5 requires that Vdd must be
lowered to less than 0.5V for a minimum of 1 ms when powering off a
card. Increase wait to 15 ms so that voltage has time to drain down
to 0.5V and cards can power off correctly. Issues with voltage drain
time were only observed on Apollo Lake and Bay Trail host controllers
so this fix is limited to those devices.
If a faulty CXL memory device returns a broken zero LSA size in its
memory device information (Identify Memory Device (Opcode 4000h), CXL
spec. 3.1, 8.2.9.9.1.1), a divide error occurs in the libnvdimm
driver:
MSI remapping bypass (directly configuring MSI entries for devices on the
VMD bus) won't work under Xen, as Xen is not aware of devices in such bus,
and hence cannot configure the entries using the pIRQ interface in the PV
case, and in the PVH case traps won't be setup for MSI entries for such
devices.
Until Xen is aware of devices in the VMD bus prevent the
VMD_FEAT_CAN_BYPASS_MSI_REMAP capability from being used when running as
any kind of Xen guest.
The MSI remapping bypass is an optional feature of VMD bridges, and hence
when running under Xen it will be masked and devices will be forced to
redirect its interrupts from the VMD bridge. That mode of operation must
always be supported by VMD bridges and works when Xen is not aware of
devices behind the VMD bridge.
If the client should see an ENETDOWN when trying to connect to the data
server, it might still be able to talk to the metadata server through
another NIC. If so, report the error.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Jeff Layton <jlayton@kernel.org> Acked-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Most systems' PCIe outbound map windows have non-zero physical addresses,
but the possibility of encountering zero increased after following commit
("PCI: dwc: Use parent_bus_offset").
'ep->outbound_addr[n]', representing 'parent_bus_address', might be 0 on
some hardware, which trims high address bits through bus fabric before
sending to the PCIe controller.
Replace the iteration logic with 'for_each_set_bit()' to ensure only
allocated map windows are iterated when determining the ATU index from a
given address.
If opts.uaccess isn't set, the uaccess validation is disabled, but only
partially: it doesn't read the uaccess_safe_builtin list but still tries
to do the validation. Disable it completely to prevent false warnings.
0c1d7a2c2d32 ("lockdep: Remove softirq accounting on PREEMPT_RT.")
the wait context test for mutex usage within "in softirq context" fails
as it references @softirq_context:
| wait context tests |
--------------------------------------------------------------------------
| rcu | raw | spin |mutex |
--------------------------------------------------------------------------
in hardirq context: ok | ok | ok | ok |
in hardirq context (not threaded): ok | ok | ok | ok |
in softirq context: ok | ok | ok |FAILED|
As a fix, add lockdep map for BH disabled section. This fixes the
issue by letting us catch cases when local_bh_disable() gets called
with preemption disabled where local_lock doesn't get acquired.
In the case of "in softirq context" selftest, local_bh_disable() was
being called with preemption disable as it's early in the boot.
[ boqun: Move the lockdep annotations into __local_bh_*() to avoid false
positives because of unpaired local_bh_disable() reported by
Borislav Petkov and Peter Zijlstra, and make bh_lock_map
only exist for PREEMPT_RT. ]
[ mingo: Restored authorship and improved the bh_lock_map definition. ]
Executing dql_reset after setting a non-zero value for limit_min can
lead to an unreasonable situation where dql->limit is less than
dql->limit_min.
For instance, after setting
/sys/class/net/eth*/queues/tx-0/byte_queue_limits/limit_min,
an ifconfig down/up operation might cause the ethernet driver to call
netdev_tx_reset_queue, which in turn invokes dql_reset.
In this case, dql->limit is reset to 0 while dql->limit_min remains
non-zero value, which is unexpected. The limit should always be
greater than or equal to limit_min.
Enable power-down of TMU (Thermal Management Unit) for TMU version 2 during
system suspend to save power. Save approximately 4.3mW on VDD_ANA_1P8 on
i.MX93 platforms.
The autobind setting was supposed to be determined in rpc_create(),
since commit c2866763b402 ("SUNRPC: use sockaddr + size when creating
remote transport endpoints").
Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a containerised process is killed and causes an ENETUNREACH or
ENETDOWN error to be propagated to the state manager, then mark the
nfs_client as being dead so that we don't loop in functions that are
expecting recovery to succeed.
Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Function ip_rfc1001_connect() which establish NetBIOS session for SMB
connections, currently uses smb_send() function for sending NetBIOS Session
Request packet. This function expects that the passed buffer is SMB packet
and for SMB2+ connections it mangles packet header, which breaks prepared
NetBIOS Session Request packet. Result is that this function send garbage
packet for SMB2+ connection, which SMB2+ server cannot parse. That function
is not mangling packets for SMB1 connections, so it somehow works for SMB1.
Fix this problem and instead of smb_send(), use smb_send_kvec() function
which does not mangle prepared packet, this function send them as is. Just
API of this function takes struct msghdr (kvec) instead of packet buffer.
[MS-SMB2] specification allows SMB2 protocol to use NetBIOS as a transport
protocol. NetBIOS can be used over TCP via port 139. So this is a valid
configuration, just not so common. And even recent Windows versions (e.g.
Windows Server 2022) still supports this configuration: SMB over TCP port
139, including for modern SMB2 and SMB3 dialects.
This change fixes SMB2 and SMB3 connections over TCP port 139 which
requires establishing of NetBIOS session. Tested that this change fixes
establishing of SMB2 and SMB3 connections with Windows Server 2022.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
I was wondering why there's garbage at the bottom of the screen when
tile blitting is used with an odd mode like 1080, 600 or 200. Sure there's
only space for half a tile but the same area is clean when the buffer
is bitmap.
Then later I found that it's supposed to be cleaned but that's not
implemented. So I took what's in bitblit and adapted it for tileblit.
This implementation was tested for both the horizontal and vertical case,
and now does the same as what's done for bitmap buffers.
If anyone is interested to reproduce the problem then I could bet that'd
be on a S3 or Ark. Just set up a mode with an odd line count and make
sure that the virtual size covers the complete tile at the bottom. E.g.
for 600 lines that's 608 virtual lines for a 16 tall tile. Then the
bottom area should be cleaned.
For the right side it's more difficult as there the drivers won't let an
odd size happen, unless the code is modified. But once it reports back a
few pixel columns short then fbcon won't use the last column. With the
patch that column is now clean.
Btw. the virtual size should be rounded up by the driver for both axes
(not only the horizontal) so that it's dividable by the tile size.
That's a driver bug but correcting it is not in scope for this patch.
The erase colour calculation for fbcon clearing should use get_color instead
of attr_col_ec, like everything else. The latter is similar but is not correct.
For example it's missing the depth dependent remapping and doesn't care about
blanking.
The problem can be reproduced by setting up the background colour to grey
(vt.color=0x70) and having an fbcon console set to 2bpp (4 shades of gray).
Now the background attribute should be 1 (dark gray) on the console.
If the screen is scrolled when pressing enter in a shell prompt at the bottom
line then the new line is cleared using colour 7 instead of 1. That's not
something fillrect likes (at 2bbp it expect 0-3) so the result is interesting.
This patch switches to get_color with vc_video_erase_char to determine the
erase colour from attr_col_ec. That makes the latter function redundant as
no other users were left.
In case of error, of_parse_phandle_with_args() returns -EINVAL when the
passed index is negative, or -ENOENT when the index is for an empty
phandle. The mailbox core overwrote the error return code with a less
precise -ENODEV. Use the error returned code from
of_parse_phandle_with_args().
Binary printing functions are using printf() type of format, and compiler
is not happy about them as is:
kernel/trace/trace.c:3292:9: error: function ‘trace_vbprintk’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
kernel/trace/trace_seq.c:182:9: error: function ‘trace_seq_bprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
Fix the compilation errors by adding __printf() attribute.
While at it, move existing __printf() attributes from the implementations
to the declarations. IT also fixes incorrect attribute parameters that are
used for trace_array_printk().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Kees Cook <kees@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20250321144822.324050-4-andriy.shevchenko@linux.intel.com Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The HIP09 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of HIP09
to the list for software mitigation.
SMB negotiate retry functionality in cifs_negotiate() is currently broken
and does not work when doing socket reconnect. Caller of this function,
which is cifs_negotiate_protocol() requires that tcpStatus after successful
execution of negotiate callback stay in CifsInNegotiate. But if the
CIFSSMBNegotiate() called from cifs_negotiate() fails due to connection
issues then tcpStatus is changed as so repeated CIFSSMBNegotiate() call
does not help.
Fix this problem by moving retrying code from negotiate callback (which is
either cifs_negotiate() or smb2_negotiate()) to cifs_negotiate_protocol()
which is caller of those callbacks. This allows to properly handle and
implement correct transistions between tcpStatus states as function
cifs_negotiate_protocol() already handles it.
With this change, cifs_negotiate_protocol() now handles also -EAGAIN error
set by the RFC1002_NEGATIVE_SESSION_RESPONSE processing after reconnecting
with NetBIOS session.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Old SMB1 servers without CAP_NT_SMBS do not support CIFS_open() function
and instead SMBLegacyOpen() needs to be used. This logic is already handled
in cifs_open_file() function, which is server->ops->open callback function.
So for querying and creating MF symlinks use open callback function instead
of CIFS_open() function directly.
This change fixes querying and creating new MF symlinks on Windows 98.
Currently cifs_query_mf_symlink() is not able to detect MF symlink and
cifs_create_mf_symlink() is failing with EIO error.
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some operations, like WRITE, does not require FILE_READ_ATTRIBUTES access.
So when FILE_READ_ATTRIBUTES is not explicitly requested for
smb2_open_file() then first try to do SMB2 CREATE with FILE_READ_ATTRIBUTES
access (like it was before) and then fallback to SMB2 CREATE without
FILE_READ_ATTRIBUTES access (less common case).
This change allows to complete WRITE operation to a file when it does not
grant FILE_READ_ATTRIBUTES permission and its parent directory does not
grant READ_DATA permission (parent directory READ_DATA is implicit grant of
child FILE_READ_ATTRIBUTES permission).
Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
An erroneous message is written to the kernel log when either of the
following actions are taken by a user:
1. Assign an adapter or domain to a vfio_ap mediated device via its sysfs
assign_adapter or assign_domain attributes that would result in one or
more AP queues being assigned that are already assigned to a different
mediated device. Sharing of queues between mdevs is not allowed.
2. Reserve an adapter or domain for the host device driver via the AP bus
driver's sysfs apmask or aqmask attribute that would result in providing
host access to an AP queue that is in use by a vfio_ap mediated device.
Reserving a queue for a host driver that is in use by an mdev is not
allowed.
In both cases, the assignment will return an error; however, a message like
the following is written to the kernel log:
Notice the mdev reporting the error is the same as the mdev identified
in the message as the one to which the queue is being assigned.
It is perfectly okay to assign a queue to an mdev to which it is
already assigned; the assignment is simply ignored by the vfio_ap device
driver.
This patch logs more descriptive and accurate messages for both 1 and 2
above to the kernel log:
Example for 1:
vfio_ap_mdev 0fe903a0-a323-44db-9daf-134c68627d61: Userspace may not assign
queue 00.0033 to mdev: already assigned to \ 62177883-f1bb-47f0-914d-32a22e3a8804
Example for 2:
vfio_ap_mdev 62177883-f1bb-47f0-914d-32a22e3a8804: Can not reserve queue
00.0033 for host driver: in use by mdev
The scripts/kconfig/merge_config.sh script requires an existing
$INITFILE (or the $1 argument) as a base file for merging Kconfig
fragments. However, an empty $INITFILE can serve as an initial starting
point, later referenced by the KCONFIG_ALLCONFIG Makefile variable
if -m is not used. This variable can point to any configuration file
containing preset config symbols (the merged output) as stated in
Documentation/kbuild/kconfig.rst. When -m is used $INITFILE will
contain just the merge output requiring the user to run make (i.e.
KCONFIG_ALLCONFIG=<$INITFILE> make <allnoconfig/alldefconfig> or make
olddefconfig).
Instead of failing when `$INITFILE` is missing, create an empty file and
use it as the starting point for merges.
When building the latest samples/bpf on LoongArch Fedora
make M=samples/bpf
There are compilation errors as follows:
In file included from ./linux/samples/bpf/sockex2_kern.c:2:
In file included from ./include/uapi/linux/in.h:25:
In file included from ./include/linux/socket.h:8:
In file included from ./include/linux/uio.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/loongarch/include/asm/thread_info.h:15:
In file included from ./arch/loongarch/include/asm/processor.h:13:
In file included from ./arch/loongarch/include/asm/cpu-info.h:11:
./arch/loongarch/include/asm/loongarch.h:13:10: fatal error: 'larchintrin.h' file not found
^~~~~~~~~~~~~~~
1 error generated.
larchintrin.h is included in /usr/lib64/clang/14.0.6/include,
and the header file location is specified at compile time.
Test on LoongArch Fedora:
https://github.com/fedora-remix-loongarch/releases-info
"sockmap_ktls disconnect_after_delete" test has been failing on BPF CI
after recent merges from netdev:
* https://github.com/kernel-patches/bpf/actions/runs/14458537639
* https://github.com/kernel-patches/bpf/actions/runs/14457178732
It happens because disconnect has been disabled for TLS [1], and it
renders the test case invalid.
Removing all the test code creates a conflict between bpf and
bpf-next, so for now only remove the offending assert [2].
This small snippet of code ensures that we do something with the array
of RX software buffer descriptor elements after passing the skb to the
stack. In this case, we see if the other half of the page is reusable,
and if so, we "turn around" the buffers, making them directly usable by
enetc_refill_rx_ring() without going to enetc_new_page().
We will need to perform this kind of buffer flipping from a new code
path, i.e. from XDP_PASS. Currently, enetc_build_skb() does it there
buffer by buffer, but in a subsequent change we will stop using
enetc_build_skb() for XDP_PASS.
When adding folio_memcg function call in the zram module for
Android16-6.12, the following error occurs during compilation:
ERROR: modpost: "cgroup_mutex" [../soc-repo/zram.ko] undefined!
This error is caused by the indirect call to lockdep_is_held(&cgroup_mutex)
within folio_memcg. The export setting for cgroup_mutex is controlled by
the CONFIG_PROVE_RCU macro. If CONFIG_LOCKDEP is enabled while
CONFIG_PROVE_RCU is not, this compilation error will occur.
To resolve this issue, add a parallel macro CONFIG_LOCKDEP control to
ensure cgroup_mutex is properly exported when needed.
When CONFIG_NEED_DMA_MAP_STATE is not defined, dma-mapping clients might
report unused data compilation warnings for dma_unmap_*() calls
arguments. Redefine macros for those calls to let compiler to notice that
it is okay when the provided arguments are not used.
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250415075659.428549-1-m.szyprowski@samsung.com Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot reports a data-race when accessing the event_triggered, here is the
simplified stack when the issue occurred:
==================================================================
BUG: KCSAN: data-race in virtqueue_disable_cb / virtqueue_enable_cb_delayed
write to 0xffff8881025bc452 of 1 bytes by task 3288 on cpu 0:
virtqueue_enable_cb_delayed+0x42/0x3c0 drivers/virtio/virtio_ring.c:2653
start_xmit+0x230/0x1310 drivers/net/virtio_net.c:3264
__netdev_start_xmit include/linux/netdevice.h:5151 [inline]
netdev_start_xmit include/linux/netdevice.h:5160 [inline]
xmit_one net/core/dev.c:3800 [inline]
read to 0xffff8881025bc452 of 1 bytes by interrupt on cpu 1:
virtqueue_disable_cb_split drivers/virtio/virtio_ring.c:880 [inline]
virtqueue_disable_cb+0x92/0x180 drivers/virtio/virtio_ring.c:2566
skb_xmit_done+0x5f/0x140 drivers/net/virtio_net.c:777
vring_interrupt+0x161/0x190 drivers/virtio/virtio_ring.c:2715
__handle_irq_event_percpu+0x95/0x490 kernel/irq/handle.c:158
handle_irq_event_percpu kernel/irq/handle.c:193 [inline]
value changed: 0x01 -> 0x00
==================================================================
When the data race occurs, the function virtqueue_enable_cb_delayed() sets
event_triggered to false, and virtqueue_disable_cb_split/packed() reads it
as false due to the race condition. Since event_triggered is an unreliable
hint used for optimization, this should only cause the driver temporarily
suggest that the device not send an interrupt notification when the event
index is used.
Fix this KCSAN reported data-race issue by explicitly tagging the access as
data_racy.
Reported-by: syzbot+efe683d57990864b8c8e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67c7761a.050a0220.15b4b9.0018.GAE@google.com/ Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Message-Id: <20250312130412.3516307-1-quic_zhonhan@quicinc.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The phy-rcar-gen3-usb2 driver exposes four individual PHYs that are
requested and configured by PHY users. The struct phy_ops APIs access the
same set of registers to configure all PHYs. Additionally, PHY settings can
be modified through sysfs or an IRQ handler. While some struct phy_ops APIs
are protected by a driver-wide mutex, others rely on individual
PHY-specific mutexes.
This approach can lead to various issues, including:
1/ the IRQ handler may interrupt PHY settings in progress, racing with
hardware configuration protected by a mutex lock
2/ due to msleep(20) in rcar_gen3_init_otg(), while a configuration thread
suspends to wait for the delay, another thread may try to configure
another PHY (with phy_init() + phy_power_on()); re-running the
phy_init() goes to the exact same configuration code, re-running the
same hardware configuration on the same set of registers (and bits)
which might impact the result of the msleep for the 1st configuring
thread
3/ sysfs can configure the hardware (though role_store()) and it can
still race with the phy_init()/phy_power_on() APIs calling into the
drivers struct phy_ops
To address these issues, add a spinlock to protect hardware register access
and driver private data structures (e.g., calls to
rcar_gen3_is_any_rphy_initialized()). Checking driver-specific data remains
necessary as all PHY instances share common settings. With this change,
the existing mutex protection is removed and the cleanup.h helpers are
used.
While at it, to keep the code simpler, do not skip
regulator_enable()/regulator_disable() APIs in
rcar_gen3_phy_usb2_power_on()/rcar_gen3_phy_usb2_power_off() as the
regulators enable/disable operations are reference counted anyway.
Commit 08b0ad375ca6 ("phy: renesas: rcar-gen3-usb2: move IRQ registration
to init") moved the IRQ request operation from probe to
struct phy_ops::phy_init API to avoid triggering interrupts (which lead to
register accesses) while the PHY clocks (enabled through runtime PM APIs)
are not active. If this happens, it results in a synchronous abort.
One way to reproduce this issue is by enabling CONFIG_DEBUG_SHIRQ, which
calls free_irq() on driver removal.
Move the IRQ request and free operations back to probe, and take the
runtime PM state into account in IRQ handler. This commit is preparatory
for the subsequent fixes in this series.
The Renesas RZ/G3S need to initialize the USB BUS before transferring data
due to hardware limitation. As the register that need to be touched for
this is in the address space of the USB PHY, and the UBS PHY need to be
initialized before any other USB drivers handling data transfer, add
support to initialize the USB BUS.
As the USB PHY is probed before any other USB drivers that enables
clocks and de-assert the reset signals and the BUS initialization is done
in the probe phase, we need to add code to de-assert reset signal and
runtime resume the device (which enables its clocks) before accessing
the registers.
As the reset signals are not required by the USB PHY driver for the other
USB PHY hardware variants, the reset signals and runtime PM was handled
only in the function that initialize the USB BUS.
The PHY initialization was done right after runtime PM enable to have
all in place when the PHYs are registered.
If an input changes state during wake-up and is used as an interrupt
source, the IRQ handler reads the volatile input register to clear the
interrupt mask and deassert the IRQ line. However, the IRQ handler is
triggered before access to the register is granted, causing the read
operation to fail.
As a result, the IRQ handler enters a loop, repeatedly printing the
"failed reading register" message, until `pca953x_resume()` is eventually
called, which restores the driver context and enables access to
registers.
Fix by disabling the IRQ line before entering suspend mode, and
re-enabling it after the driver context is restored in `pca953x_resume()`.
An IRQ can be disabled with disable_irq() and still wake the system as
long as the IRQ has wake enabled, so the wake-up functionality is
preserved.
Do not imply that some of the generic headers may be always included.
Instead, include explicitly what we are direct user of.
While at it, sort headers alphabetically.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Stable-dep-of: 3e38f946062b ("gpio: pca953x: fix IRQ storm on system wake up") Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of resetting permissions all over the place when freeing module
memory tell the vmalloc code to do so. Avoids the exercise for the next
upcoming user.
Set the s3/s0ix and s4 flags in the pm notifier so that we can skip
the resource evictions properly in pm prepare based on whether
we are suspending or hibernating. Drop the eviction as processes
are not frozen at this time, we we can end up getting stuck trying
to evict VRAM while applications continue to submit work which
causes the buffers to get pulled back into VRAM.
v2: Move suspend flags out of pm notifier (Mario)
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4178 Fixes: 2965e6355dcd ("drm/amd: Add Suspend/Hibernate notification callback support") Cc: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 06f2dcc241e7e5c681f81fbc46cacdf4bfd7d6d7) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_get_drvdata() gets used to acquire the pointer to cqspi and the SPI
controller. Neither embed the other; this lead to memory corruption.
On a given platform (Mobileye EyeQ5) the memory corruption is hidden
inside cqspi->f_pdata. Also, this uninitialised memory is used as a
mutex (ctlr->bus_lock_mutex) by spi_controller_suspend().
Fixes: 2087e85bb66e ("spi: cadence-quadspi: fix suspend-resume implementations") Reviewed-by: Dhruva Gole <d-gole@ti.com> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Link: https://msgid.link/r/20240222-cdns-qspi-pm-fix-v4-1-6b6af8bcbf59@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb()
tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a
race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL
while __ip_make_skb() is running, the function will access icmphdr in the
skb even if it is not included. This causes the issue reported by KMSAN.
Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL
on the socket.
Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These
are union in struct flowi4 and are implicitly initialized by
flowi4_init_output(), but we should not rely on specific union layout.
As it was done in commit fc1092f51567 ("ipv4: Fix uninit-value access in
__ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags
instead of testing HDRINCL on the socket to avoid a race condition which
causes uninit-value access.
Fixes: ea30388baebc ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()") Signed-off-by: Shigeru Yoshida <syoshida@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MTU setting at the time an XDP multi-buffer is attached
determines whether the aggregation ring will be used and the
rx_skb_func handler. This is done in bnxt_set_rx_skb_mode().
If the MTU is later changed, the aggregation ring setting may need
to be changed and it may become out-of-sync with the settings
initially done in bnxt_set_rx_skb_mode(). This may result in
random memory corruption and crashes as the HW may DMA data larger
than the allocated buffer size, such as:
To address the issue, we now call bnxt_set_rx_skb_mode() within
bnxt_change_mtu() to properly set the AGG rings configuration and
update rx_skb_func based on the new MTU value.
Additionally, BNXT_FLAG_NO_AGG_RINGS is cleared at the beginning of
bnxt_set_rx_skb_mode() to make sure it gets set or cleared based on
the current MTU.
Fixes: 08450ea98ae9 ("bnxt_en: Fix max_mtu setting for multi-buf XDP") Co-developed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Shravya KN <shravya.k-n@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wakeup for IRQ1 should be disabled only in cases where i8042 had
actually enabled it, otherwise "wake_depth" for this IRQ will try to
drop below zero and there will be an unpleasant WARN() logged:
kernel: atkbd serio0: Disabling IRQ1 wakeup source to avoid platform firmware bug
kernel: ------------[ cut here ]------------
kernel: Unbalanced IRQ 1 wake disable
kernel: WARNING: CPU: 10 PID: 6431 at kernel/irq/manage.c:920 irq_set_irq_wake+0x147/0x1a0
The PMC driver uses DEFINE_SIMPLE_DEV_PM_OPS() to define its dev_pm_ops
which sets amd_pmc_suspend_handler() to the .suspend, .freeze, and
.poweroff handlers. i8042_pm_suspend(), however, is only set as
the .suspend handler.
Fix the issue by call PMC suspend handler only from the same set of
dev_pm_ops handlers as i8042_pm_suspend(), which currently means just
the .suspend handler.
To reproduce this issue try hibernating (S4) the machine after a fresh boot
without putting it into s2idle first.
Fixes: 8e60615e8932 ("platform/x86/amd: pmc: Disable IRQ1 wakeup for RN/CZN") Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Link: https://lore.kernel.org/r/c8f28c002ca3c66fbeeb850904a1f43118e17200.1736184606.git.mail@maciej.szmigiero.name
[ij: edited the commit message.] Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sme_alloc() is called with existing storage and we are not flushing we
will always allocate new storage, both leaking the existing storage and
corrupting the state. Fix this by separating the checks for flushing and
for existing storage as we do for SVE.
Callers that reallocate (eg, due to changing the vector length) should
call sme_free() themselves.
Fixes: 5d0a8d2fba50 ("arm64/ptrace: Ensure that SME is set up for target when writing SSVE state") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240115-arm64-sme-flush-v1-1-7472bd3459b7@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nf_tables_chain_destroy can sleep, it can't be used from call_rcu
callbacks.
Moreover, nf_tables_rule_release() is only safe for error unwinding,
while transaction mutex is held and the to-be-desroyed rule was not
exposed to either dataplane or dumps, as it deactives+frees without
the required synchronize_rcu() in-between.
nft_rule_expr_deactivate() callbacks will change ->use counters
of other chains/sets, see e.g. nft_lookup .deactivate callback, these
must be serialized via transaction mutex.
Also add a few lockdep asserts to make this more explicit.
Calling synchronize_rcu() isn't ideal, but fixing this without is hard
and way more intrusive. As-is, we can get:
In case the synchronize_rcu becomes an issue, we can explore alternatives.
One way would be to allocate nft_trans_rule objects + one nft_trans_chain
object, deactivate the rules + the chain and then defer the freeing to the
nft destroy workqueue. We'd still need to keep the synchronize_rcu path as
a fallback to handle -ENOMEM corner cases though.
Reported-by: syzbot+b26935466701e56cfdc2@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/67478d92.050a0220.253251.0062.GAE@google.com/T/ Fixes: c03d278fdf35 ("netfilter: nf_tables: wait for rcu grace period on net_device removal") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
8c873e219970 ("netfilter: core: free hooks with call_rcu") removed
synchronize_net() call when unregistering basechain hook, however,
net_device removal event handler for the NFPROTO_NETDEV was not updated
to wait for RCU grace period.
Note that 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks
on net_device removal") does not remove basechain rules on device
removal, I was hinted to remove rules on net_device removal later, see 5ebe0b0eec9d ("netfilter: nf_tables: destroy basechain and rules on
netdevice removal").
Although NETDEV_UNREGISTER event is guaranteed to be handled after
synchronize_net() call, this path needs to wait for rcu grace period via
rcu callback to release basechain hooks if netns is alive because an
ongoing netlink dump could be in progress (sockets hold a reference on
the netns).
Note that nf_tables_pre_exit_net() unregisters and releases basechain
hooks but it is possible to see NETDEV_UNREGISTER at a later stage in
the netns exit path, eg. veth peer device in another netns:
In this particular case, same rule of thumb applies: if netns is alive,
then wait for rcu grace period because netlink dump in the other netns
could be in progress. Otherwise, if the other netns is going away then
no netlink dump can be in progress and basechain hooks can be released
inmediately.
While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain
validation, which should not ever happen.
Fixes: 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It would be better to not store nft_ctx inside nft_trans object,
the netlink ctx strucutre is huge and most of its information is
never needed in places that use trans->ctx.
Avoid/reduce its usage if possible, no runtime behaviour change
intended.
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: c03d278fdf35 ("netfilter: nf_tables: wait for rcu grace period on net_device removal") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b15c87263a69 ("hwpoison, memory_hotplug: allow hwpoisoned pages to
be offlined) add page poison checks in do_migrate_range in order to make
offline hwpoisoned page possible by introducing isolate_lru_page and
try_to_unmap for hwpoisoned page. However folio lock must be held before
calling try_to_unmap. Add it to fix this problem.
Warning will be produced if folio is not locked during unmap:
LoongArch's toolchain may change the default code model from normal to
medium. This is unnecessary for kernel, and generates some relocations
which cannot be handled by the module loader. So explicitly specify the
code model to normal in Makefile (for Rust 'normal' is 'small').
When BPF_TRAMP_F_CALL_ORIG is enabled, the address of a bpf_tramp_image
struct on the stack is passed during the size calculation pass and
an address on the heap is passed during code generation. This may
cause a heap buffer overflow if the heap address is tagged because
emit_a64_mov_i64() will emit longer code than it did during the size
calculation pass. The same problem could occur without tag-based
KASAN if one of the 16-bit words of the stack address happened to
be all-ones during the size calculation pass. Fix the problem by
assuming the worst case (4 instructions) when calculating the size
of the bpf_tramp_image address emission.
When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls
__bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them
the struct bpf_tramp_image *im pointer as an argument in R0.
The trampoline generation code uses emit_addr_mov_i64() to emit
instructions for moving the bpf_tramp_image address into R0, but
emit_addr_mov_i64() assumes the address to be in the vmalloc() space
and uses only 48 bits. Because bpf_tramp_image is allocated using
kzalloc(), its address can use more than 48-bits, in this case the
trampoline will pass an invalid address to __bpf_tramp_enter/exit()
causing a kernel crash.
Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64()
as it can work with addresses that are greater than 48-bits.
Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64") Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Closes: https://lore.kernel.org/all/SJ0PR15MB461564D3F7E7A763498CA6A8CBDB2@SJ0PR15MB4615.namprd15.prod.outlook.com/ Link: https://lore.kernel.org/bpf/20240711151838.43469-1-puranjay@kernel.org
[Minor context change fixed.] Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In sparse vmemmap model, the virtual address of vmemmap is calculated as:
((struct page *)VMEMMAP_START - (phys_ram_base >> PAGE_SHIFT)).
And the struct page's va can be calculated with an offset:
(vmemmap + (pfn)).
However, when initializing struct pages, kernel actually starts from the
first page from the same section that phys_ram_base belongs to. If the
first page's physical address is not (phys_ram_base >> PAGE_SHIFT), then
we get an va below VMEMMAP_START when calculating va for it's struct page.
For example, if phys_ram_base starts from 0x82000000 with pfn 0x82000, the
first page in the same section is actually pfn 0x80000. During
init_unavailable_range(), we will initialize struct page for pfn 0x80000
with virtual address ((struct page *)VMEMMAP_START - 0x2000), which is
below VMEMMAP_START as well as PCI_IO_END.
This commit fixes this bug by introducing a new variable
'vmemmap_start_pfn' which is aligned with memory section size and using
it to calculate vmemmap address instead of phys_ram_base.
Fixes: a11dd49dcb93 ("riscv: Sparse-Memory/vmemmap out-of-bounds fix") Signed-off-by: Xu Lu <luxu.kernel@bytedance.com> Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Tested-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Link: https://lore.kernel.org/r/20241209122617.53341-1-luxu.kernel@bytedance.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Zhaoyang Li <lizy04@hust.edu.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With numa balancing on, when a numa system is running where a numa node
doesn't have its local memory so it has no managed zones, the following
oops has been observed. It's because wakeup_kswapd() is called with a
wrong zone index, -1. Fixed it by checking the index before calling
wakeup_kswapd().
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com Fixes: bd67d5c15cc1 ("Test compaction of mlocked memory") Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com> Acked-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Sri Jayaramappa <sjayaram@akamai.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error handling for the case `con_index == 0` should involve dropping
the pm usage counter, as ucsi_ccg_sync_control() gets it at the
beginning. Fix it.
Cc: stable <stable@kernel.org> Fixes: e56aac6e5a25 ("usb: typec: fix potential array underflow in ucsi_ccg_sync_control()") Signed-off-by: GONG Ruiqi <gongruiqi1@huawei.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250107015750.2778646-1-gongruiqi1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[Minor context change fixed.] Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "command" variable can be controlled by the user via debugfs. The
worry is that if con_index is zero then "&uc->ucsi->connector[con_index
- 1]" would be an array underflow.
Fixes: 170a6726d0e2 ("usb: typec: ucsi: add support for separate DP altmode devices") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/c69ef0b3-61b0-4dde-98dd-97b97f81d912@stanley.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ The function ucsi_ccg_sync_write() is renamed to ucsi_ccg_sync_control()
in commit 13f2ec3115c8 ("usb: typec: ucsi:simplify command sending API").
Apply this patch to ucsi_ccg_sync_write() in 6.1.y accordingly. ] Signed-off-by: Bin Lan <bin.lan.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DisplayPort driver's sysfs nodes may be present to the userspace before
typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that
a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in
hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns
NULL in those cases.
Remove manual sysfs node creation in favor of adding attribute group as
default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is
not used here otherwise the path to the sysfs nodes is no longer compliant
with the ABI.
Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Link: https://lore.kernel.org/r/20240229001101.3889432-2-rdbabiera@google.com
[Minor conflict resolved due to code context change.] Signed-off-by: Jianqi Ren <jianqi.ren.cn@windriver.com> Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the ucsi_con_mutex_lock / ucsi_con_mutex_unlock
functions to the UCSI driver. ucsi_con_mutex_lock ensures the connector
mutex is only locked if a connection is established and the partner pointer
is valid. This resolves a deadlock scenario where
ucsi_displayport_remove_partner holds con->mutex waiting for
dp_altmode_work to complete while dp_altmode_work attempts to acquire it.
Cc: stable <stable@kernel.org> Fixes: af8622f6a585 ("usb: typec: ucsi: Support for DisplayPort alt mode") Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20250424084429.3220757-2-akuchynski@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory allocated for idxd is not freed if an error occurs during
idxd_pci_probe(). To fix it, free the allocated memory in the reverse
order of allocation before exiting the function in case of an error.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Cc: stable@vger.kernel.org Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Link: https://lore.kernel.org/r/20250404120217.48772-8-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory allocated for idxd is not freed if an error occurs during
idxd_alloc(). To fix it, free the allocated memory in the reverse order
of allocation before exiting the function in case of an error.
The remove call stack is missing idxd cleanup to free bitmap, ida and
the idxd_device. Call idxd_free() helper routines to make sure we exit
gracefully.
Fixes: bfe1d56091c1 ("dmaengine: idxd: Init and probe for Intel data accelerators") Cc: stable@vger.kernel.org Suggested-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20250404120217.48772-9-xueshuai@linux.alibaba.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
