Ching-Te Ku [Mon, 16 Jun 2025 09:02:47 +0000 (17:02 +0800)]
wifi: rtw89: coex: Update scoreboard to avoid Bluetooth re-link fail
When platform resume, there will have fail rate when Bluetooth try to
re-link. And when Bluetooth is booting up, it will run the ROM code
first, then load the firmware code from file. Catch this change and
set the mechanism for Bluetooth re-link.
Ching-Te Ku [Mon, 16 Jun 2025 09:02:46 +0000 (17:02 +0800)]
wifi: rtw89: coex: Get Bluetooth desired version by WiFi firmware version
Because when Wi-Fi/Bluetooth want to communicate with each other, their
contact window are their firmware. So the desired version code is more
reasonable to change with firmware version.
Ching-Te Ku [Mon, 16 Jun 2025 09:02:43 +0000 (17:02 +0800)]
wifi: rtw89: coex: Enable outsource info H2C command
The before several patches collect driver information, then this patch
packet these information as outsource info and update to firmware by H2C
command.
Ching-Te Ku [Mon, 16 Jun 2025 09:02:42 +0000 (17:02 +0800)]
wifi: rtw89: coex: Add v1 Bluetooth AFH handshake for WiFi 7
WiFi 7 generation has dual MAC, Coexistence need to find out the
2GHz WiFi connection in the connected links. And assign its channel
to Bluetooth to make Bluetooth not to hop into WiFi channel.
Ching-Te Ku [Wed, 11 Jun 2025 03:55:23 +0000 (11:55 +0800)]
wifi: rtw89: coex: Add PTA grant signal setting offload to firmware feature
In the before experience there are many issue occurred because of the
grant control signal can not be set in time especially WiFi power save
enter/leave. To control the signal more accuracy, offload the control
to firmware.
Ching-Te Ku [Wed, 11 Jun 2025 03:55:21 +0000 (11:55 +0800)]
wifi: rtw89: coex: Update BTG control for WiFi 7
BTG means a path work for Bluetooth & Wi-Fi 2.4GHz. To earn a better
coexistence performance, need to do some RF setting for BTG path.
WiFi 7 generation offload the feature to firmware, to get a more
accuracy control. And decrease driver I/O.
Ching-Te Ku [Wed, 11 Jun 2025 03:55:20 +0000 (11:55 +0800)]
wifi: rtw89: coex: Update Pre-AGC logic for WiFi 7
Pre-AGC is Wi-Fi auto Rx gain control. The mechanism need to switching
very fast, especially while Wi-Fi is under 2GHz/5GHz multi-port scenario.
To earn a more accuracy & sensitive gain control, in the WiFi 7 later
firmware, Pre-AGC mechanism has offloaded to firmware.
Ching-Te Ku [Wed, 11 Jun 2025 03:55:19 +0000 (11:55 +0800)]
wifi: rtw89: coex: Add H2C command to collect driver outsource information to firmware
In order to reduce driver I/O & some detail instant hardware control, some
of the necessary API offload to Wi-Fi firmware. Collect the reference
parameters to let firmware do decisions.
Ching-Te Ku [Wed, 11 Jun 2025 03:55:18 +0000 (11:55 +0800)]
wifi: rtw89: coex: refine debug log with format version and readable string
Fix unexpected line warp. Collect firmware report format version and
driver support report format version code to check unexpected C2H report
exception.
Zong-Zhe Yang [Wed, 11 Jun 2025 03:55:14 +0000 (11:55 +0800)]
wifi: rtw89: introduce rtw89_query_mr_chanctx_info() for multi-role chanctx info
Add Wi-Fi 7 MLO related multi-role (MR) chanctx descriptors and query
function. They are designed for other components, e.g. coex, which are
interested in the following info.
* whether a MLD exists and how many active link
* the number of AP mode and station mode respectively
* how many chanctx and the number of 2/5/6 GHz respectively
Chih-Kang Chang [Tue, 10 Jun 2025 13:00:34 +0000 (21:00 +0800)]
wifi: rtw89: scan abort when assign/unassign_vif
If scan happen during start_ap, the register which control TX might be
turned off during scan. Additionally, if set_channel occurs during scan
will backup this register and set to firmware after set_channel done.
When scan complete, firmware will also set TX by this register, causing
TX to be disabled and beacon can't be TX. Therefore, in assign/unassign_vif
call scan abort before set_channel to avoid scan racing with set_channel.
Chih-Kang Chang [Tue, 10 Jun 2025 13:00:33 +0000 (21:00 +0800)]
wifi: rtw89: mcc: enlarge TX retry count when GC auth
The auth retry only continue 40ms, but the GO might switch to STA role
50ms when MCC. Therefore, enlarge the TX retry count from 32 to 60 to
let GC TX time overlapping with GO timeslot.
Chih-Kang Chang [Tue, 10 Jun 2025 13:00:32 +0000 (21:00 +0800)]
wifi: rtw89: mcc: use anchor pattern when bcn offset less than min of tob
When the beacon offset is less than minimum of auxiliary tob
(aux->duration - aux->limit.max_toa), the upper bound of the reference
toa might be negative and lower than the lower bound, which causes the
auxiliary result to exceed the NoA limit. Therefore, in this case, the
anchor pattern is used for calculation.
Chih-Kang Chang [Tue, 10 Jun 2025 13:00:30 +0000 (21:00 +0800)]
wifi: rtw89: mcc: enlarge scan time of GC when GO in MCC
In original scan, the scan time only 45ms. The GO in MCC mode only
stay 50ms and switch to STA role 50ms, which might cause GC can't scan
GO. Therefore, enlarge scan time to 105ms to ensure GC have time
overlapping with GO.
Chih-Kang Chang [Tue, 10 Jun 2025 13:00:29 +0000 (21:00 +0800)]
wifi: rtw89: mcc: adjust TX nulldata early time from 3ms to 7ms
Adjust TX nulldata early time to let nulldata have more contention time
to TX. Otherwise, AP is hard to receive nulldata 1, which causes the
throughput test failed due to packet drops.
Chih-Kang Chang [Tue, 10 Jun 2025 13:00:28 +0000 (21:00 +0800)]
wifi: rtw89: TX nulldata 0 after scan complete
HW scan leak to TX nulldata 0 to AP after scan completed, which allowed
AP start to TX packet to us. Therefore, driver TX nulldata 0 after scan
completed.
Chih-Kang Chang [Tue, 10 Jun 2025 13:00:27 +0000 (21:00 +0800)]
wifi: rtw89: mcc: stop TX during MCC prepare
Stop TX during the MCC configuration period to prevent packet leakage.
The stop time is defined as 'start_tsf - tsf', which means the duration
from when MCC configuration begins until MCC starts.
Chih-Kang Chang [Tue, 10 Jun 2025 13:00:26 +0000 (21:00 +0800)]
wifi: rtw89: mcc: adjust beacon filter when MCC and detect connection
MCC needs to wait at most 300ms to start. Additionally, if
scanning happens before MCC starts, it will miss some beacons,
which might cause beacon loss. Therefore, we reset beacon
filter when MCC start to let hardware reset beacon loss counter.
Additionally, GO is forbid to enter courtesy mode might cause
STA beacon loss. Therefore, disable beacon filter when GO+STA.
However, In WiFi 7 chip, even when GC+STA enable courtesy mode, the
beacon might loss because switching to courtesy timeslot will disable
TX/RX. If the TOB(time offset behind) or TOA(time offset ahead) is
too close to the edge of timeslot, the beacon might not be received.
Therefore, disable beacon filter when GC+STA in WiFi 7 chip.
Because disabling the beacon filter might prevent disconnection
when the AP power-off without sending a deauth. Therefore, driver
TX QOS nulldata periodically to detect the AP status, and the
connection is terminated if no ACK is received for 6 seconds.
Chih-Kang Chang [Tue, 10 Jun 2025 13:00:25 +0000 (21:00 +0800)]
wifi: rtw89: mcc: correct frequency when MCC
The frequency get from PPDU status set as center channel during MCC,
but we need to report to mac80211 as primary channel. Therefore, we
use the chanctx information in software to instead it.
Zong-Zhe Yang [Tue, 10 Jun 2025 13:00:23 +0000 (21:00 +0800)]
wifi: rtw89: extend HW scan of WiFi 6 chips for extra OP chan when concurrency
HW scan flow has considered the timing when to get back op for the scanning
interface. But, when concurrency, there are two interfaces with connection.
The OP channel of another one was not back originally. It then easily lead
to connection loss when scanning during concurrency. So, HW scan flow is
extended to deal with second OP channel. And, H2C command is also extended
to fill second MAC ID.
The changes mentioned above are done for WiFi 6 chips first. HW scan has
different handling architectures including FW and driver on WiFi 7 chips.
Arnd Bergmann [Tue, 10 Jun 2025 09:22:23 +0000 (11:22 +0200)]
wifi: rtlwifi: avoid stack size warning for _read_eeprom_info
txpower_info_{2g,5g} are too big to fit on the stack, but in most of the
rtlwifi variants this stays below the warning limit for stack frames.
In rtl8192ee and a few others, I see a case where clang decides to fully
inline this into rtl92ee_read_eeprom_info, triggering this warning:
Mark _rtl92ee_read_txpower_info_from_hwpg() as noinline_for_stack to
and mark _rtl92ee_get_chnl_group() as __always_inline to make clang
behave the same way as gcc. Inlining _rtl92ee_get_chnl_group helps
let the compiler see that the index is always in range. The same
change appears to be necessary in all rtlwifi variants.
A more thorough approach would be to avoid the use of the two structures
on the stack entirely and combine them with the struct rtl_efuse
data that is dynamically allocated and holds the same information.
wifi: rtw88: Enable AP and adhoc modes for SDIO again
AP mode can be enabled again for SDIO now that the problem was fixed
in commit b2effcdc2379 ("wifi: rtw88: sdio: map mgmt frames to queue
TX_DESC_QSEL_MGMT") and commit fc5f5a0ec463 ("wifi: rtw88: sdio: call
rtw_sdio_indicate_tx_status unconditionally").
The RTW_WCPU_11AC and RTW_WCPU_11N enums are used to identify two
types of microcontrollers used in Realtek chips, but these names are
misleading. The "11AC" type was also used in 11n devices (e.g.
RTL8733BU, not supported by rtw88), and the "11N" type was also used
in 11ac devices (RTL8821AU, RTL8812AU).
Rename RTW_WCPU_11AC to RTW_WCPU_3081 and RTW_WCPU_11N to RTW_WCPU_8051.
(8051 is well known. It's less clear what 3081 is, but the out of tree
drivers use this name.)
Kuan-Chung Chen [Fri, 6 Jun 2025 02:04:37 +0000 (10:04 +0800)]
wifi: rtw89: 8922a: pass channel information when enter LPS
Newer firmware requires the driver to pass channel information
when switching from normal mode to low power mode; otherwise it
will result in poor RX beacon performance.
Kuan-Chung Chen [Fri, 6 Jun 2025 02:04:08 +0000 (10:04 +0800)]
wifi: rtw89: add chip_ops::chan_to_rf18_val to get code of RF register value
The RF 0x18 register stores radio frequency domain parameters, including
band, center channel and bandwidth. This information is used in RF
domain. Add a chip_ops to retrieve the RF 0x18 value, which allows
driver to query for a specific channel.
Ping-Ke Shih [Fri, 6 Jun 2025 02:03:00 +0000 (10:03 +0800)]
wifi: rtw89: mac: add dummy handler of MAC C2H event class 27
The newer firmware add new C2H event class 27, which is to report WiFi
role status. Since rtw89 doesn't use the status yet, add a dummy handler
to avoid warning:
rtw89_8922ae 0000:03:00.0: MAC c2h class 27 func 0 not support
Zong-Zhe Yang [Fri, 6 Jun 2025 02:02:58 +0000 (10:02 +0800)]
wifi: rtw89: fw: add RFE type to RF TSSI H2C command
Append a new field for RFE (RF Front End) type to RF TSSI H2C command.
FW has forward compatibility when handling this H2C command, so just
need to consider backward cases in FW point of view.
| old FW | new FW
------------------------------
old driver | O | X
------------------------------
new driver | O | O
Currently only RTL8922A uses this RF TSSI H2C command. Increase its FW
format max and will let new FW binary align with it. Then, old driver
won't load new FW.
Kuan-Chung Chen [Thu, 5 Jun 2025 11:42:07 +0000 (19:42 +0800)]
wifi: rtw89: fix EHT 20MHz TX rate for non-AP STA
The 4-octet EHT MCS/NSS subfield is only used for 20 MHz-only
non-AP STA. Correct the interpretation of this subfield to
prevent improper rate limitations.
Zong-Zhe Yang [Thu, 5 Jun 2025 11:42:05 +0000 (19:42 +0800)]
wifi: rtw89: implement channel switch support
To support channel switch on STA mode, declare IEEE80211_HW_CHANCTX_STA_CSA
and implement ieee80211_ops::switch_vif_chanctx. Handling of CSA procedure
still relies on mac80211 SW flow, since FW doesn't support chanctx offload.
To support channel switch on AP mode, declare WIPHY_FLAG_HAS_CHANNEL_SWITCH
and implement ieee80211_ops::channel_switch_beacon additionally.
Zong-Zhe Yang [Thu, 5 Jun 2025 11:42:04 +0000 (19:42 +0800)]
wifi: rtw89: chan: re-config default chandef only when none is registered
Previously, default chandef is configured if no chanctx is active, i.e. no
chanctx is assigned to some vif. For normal cases, it's fine. However, for
impending CSA support, need to consider that one chanctx may be added, or
called registered, ahead without being assigned immediately. Then, it will
keep inactive, and might be covered by the default one when re-calculating
chanctxs happens in certain sequences. So now, don't re-config the default
chandef unless no chanctx is registered.
Zong-Zhe Yang [Thu, 5 Jun 2025 11:42:03 +0000 (19:42 +0800)]
wifi: rtw89: chan: concentrate the logic of setting/clearing chanctx bitmap
Originally, the logic for setting bits was wrapped inside the configuring
function. However, raw clearing bits, clear_bit, was called directly. To be
more paired and more understandable. Concentrate the logic of them into the
same function.
Fedor Pchelkin [Wed, 4 Jun 2025 16:13:33 +0000 (19:13 +0300)]
wifi: rtw89: sar: do not assert wiphy lock held until probing is done
rtw89_sar_set_src() may be called at driver early init phase when
applying SAR configuration via ACPI. wiphy lock is not held there.
Since the assertion was initially added for rtw89_apply_sar_common() call
path and may be helpful for other places in future changes, keep it but
move it under RTW89_FLAG_PROBE_DONE test.
Found by Linux Verification Center (linuxtesting.org).
Fedor Pchelkin [Wed, 4 Jun 2025 16:13:32 +0000 (19:13 +0300)]
wifi: rtw89: sar: drop lockdep assertion in rtw89_set_sar_from_acpi
The following assertion is triggered on the rtw89 driver startup. It
looks meaningless to hold wiphy lock on the early init stage so drop the
assertion.
Dan Carpenter [Wed, 28 May 2025 08:11:02 +0000 (11:11 +0300)]
wifi: rtw89: mcc: prevent shift wrapping in rtw89_core_mlsr_switch()
The "link_id" value comes from the user via debugfs. If it's larger
than BITS_PER_LONG then that would result in shift wrapping and
potentially an out of bounds access later. In fact, we can limit it
to IEEE80211_MLD_MAX_NUM_LINKS (15).
Fortunately, only root can write to debugfs files so the security
impact is minimal.
Chin-Yen Lee [Fri, 23 May 2025 06:27:11 +0000 (14:27 +0800)]
wifi: rtw89: pci: add PCI Express error handling
Sometimes PCIe Advanced Error Reporting(AER), like bad TLP or
Data link protocol error, happens due to unstable pci signal or
no response from PCI host.
Chin-Yen Lee [Fri, 23 May 2025 06:27:10 +0000 (14:27 +0800)]
wifi: rtw88: pci: add PCI Express error handling
Sometimes PCIe Advanced Error Reporting(AER), like bad TLP or
Data link protocol error, happens due to unstable pci signal or
no response from PCI host.
pcieport 0000:00:00.0: AER: Multiple Corrected error message received from 0000:00:00.0
pcieport 0000:00:00.0: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
pcieport 0000:00:00.0: AER: device [14c3:6786] error status/mask=000000c1/00006000
pcieport 0000:00:00.0: AER: [ 0] RxErr (First)
pcieport 0000:00:00.0: AER: [ 6] BadTLP
pcieport 0000:00:00.0: AER: [ 7] BadDLLP
pcieport 0000:00:00.0: AER: Corrected error message received from 0000:00:00.0
pcieport 0000:00:00.0: AER: found no error details for 0000:00:00.0
pcieport 0000:00:00.0: AER: Multiple Corrected error message received from 0000:00:00.0
pcieport 0000:00:00.0: AER: found no error details for 0000:00:00.0
pcieport 0000:00:00.0: AER: Multiple Corrected error message received from 0000:00:00.0
pcieport 0000:00:00.0: AER: found no error details for 0000:00:00.0
Setup callback function to call SER function to reset driver to recover
from these states
wifi: rtlwifi: Constify struct rtl_hal_ops and rtl_hal_cfg
'struct rtl_hal_ops' and 'struct rtl_hal_cfg' are not modified in these
drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
Constification of rtl_hal_cfg is only needed in rtl8192cu/sw.c
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
10167 5512 128 15807 3dbf drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.o
After:
=====
text data bss dec hex filename
10743 4936 128 15807 3dbf drivers/net/wireless/realtek/rtlwifi/rtl8188ee/sw.o
Linus Torvalds [Wed, 28 May 2025 22:24:36 +0000 (15:24 -0700)]
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
Linus Torvalds [Wed, 28 May 2025 21:55:35 +0000 (14:55 -0700)]
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The headline feature is the re-enablement of support for Arm's
Scalable Matrix Extension (SME) thanks to a bumper crop of fixes
from Mark Rutland.
If matrices aren't your thing, then Ryan's page-table optimisation
work is much more interesting.
Summary:
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected
Memory management:
- Prevent BSS exports from being used by the early PI code
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end
of the mapping operation
- Extend mmap() randomisation for 52-bit virtual addresses (on par
with 48-bit addressing) and remove limited support for
randomisation of the linear map
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function
Miscellaneous:
- Add some missing header inclusions to the CCA headers
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical)
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree
blob"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: cputype: Add cputype definition for HIP12
arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again
perf/arm-cmn: Add CMN S3 ACPI binding
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
perf/arm-cmn: Initialise cmn->cpu earlier
kselftest/arm64: Set default OUTPUT path when undefined
arm64: Update comment regarding values in __boot_cpu_mode
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/cpuinfo: only show one cpu's info in c_show()
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
...
Linus Torvalds [Wed, 28 May 2025 21:52:12 +0000 (14:52 -0700)]
Merge tag 'nios2_updates_for_v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux
Pull nios2 updates fromDinh Nguyen:
- Use strscpy() and simply setup_cpuinfo()
- Remove conflicting mappings when flushing tlb entries
- Force update_mmu_cache on spurious pagefaults
* tag 'nios2_updates_for_v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
nios2: Replace strcpy() with strscpy() and simplify setup_cpuinfo()
nios2: do not introduce conflicting mappings when flushing tlb entries
nios2: force update_mmu_cache on spurious tlb-permission--related pagefaults
Linus Torvalds [Wed, 28 May 2025 20:36:38 +0000 (13:36 -0700)]
Merge tag 'jfs-6.16' of github.com:kleikamp/linux-shaggy
Pull jfs updates from David Kleikamp:
"A few small fixes for jfs"
* tag 'jfs-6.16' of github.com:kleikamp/linux-shaggy:
jfs: fix array-index-out-of-bounds read in add_missing_indices
jfs: Fix null-ptr-deref in jfs_ioc_trim
jfs: validate AG parameters in dbMount() to prevent crashes
Linus Torvalds [Wed, 28 May 2025 19:40:39 +0000 (12:40 -0700)]
Merge tag 'dlm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This fixes delays when shutting down SCTP connections, and updates dlm
Kconfig for SCTP"
* tag 'dlm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: drop SCTP Kconfig dependency
dlm: reject SCTP configuration if not enabled
dlm: use SHUT_RDWR for SCTP shutdown
dlm: mask sk_shutdown value
Linus Torvalds [Wed, 28 May 2025 19:21:12 +0000 (12:21 -0700)]
Merge tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"The marquee feature for this release is that the limit on the maximum
rsize and wsize has been raised to 4MB. The default remains at 1MB,
but risk-seeking administrators now have the ability to try larger I/O
sizes with NFS clients that support them. Eventually the default
setting will be increased when we have confidence that this change
will not have negative impact.
With v6.16, NFSD now has its own debugfs file system where we can add
experimental features and make them available outside of our
development community without impacting production deployments. The
first experimental setting added is one that makes all NFS READ
operations use vfs_iter_read() instead of the NFSD splice actor. The
plan is to eventually retire the splice actor, as that will enable a
number of new capabilities such as the use of struct bio_vec from the
top to the bottom of the NFSD stack.
Jeff Layton contributed a number of observability improvements. The
use of dprintk() in a number of high-traffic code paths has been
replaced with static trace points.
This release sees the continuation of efforts to harden the NFSv4.2
COPY operation. Soon, the restriction on async COPY operations can be
lifted.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.16 development cycle"
* tag 'nfsd-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (60 commits)
xdrgen: Fix code generated for counted arrays
SUNRPC: Bump the maximum payload size for the server
NFSD: Add a "default" block size
NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
NFSD: Remove NFSD_BUFSIZE
sunrpc: Remove the RPCSVC_MAXPAGES macro
svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages
svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages
sunrpc: Adjust size of socket's receive page array dynamically
SUNRPC: Remove svc_rqst :: rq_vec
SUNRPC: Remove svc_fill_write_vector()
NFSD: Use rqstp->rq_bvec in nfsd_iter_write()
SUNRPC: Export xdr_buf_to_bvec()
NFSD: De-duplicate the svc_fill_write_vector() call sites
NFSD: Use rqstp->rq_bvec in nfsd_iter_read()
sunrpc: Replace the rq_bvec array with dynamically-allocated memory
sunrpc: Replace the rq_pages array with dynamically-allocated memory
sunrpc: Remove backchannel check in svc_init_buffer()
sunrpc: Add a helper to derive maxpages from sv_max_mesg
svcrdma: Reduce the number of rdma_rw contexts per-QP
...
Linus Torvalds [Wed, 28 May 2025 19:12:08 +0000 (12:12 -0700)]
Merge tag 'ext4_for_linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New ext4 features and performance improvements:
- Fast commit performance improvements
- Multi-fsblock atomic write support for bigalloc file systems
- Large folio support for regular files
This last can result in really stupendous performance for the right
workloads. For example, see [1] where the Kernel Test Robot reported
over 37% improvement on a large sequential I/O workload.
There are also the usual bug fixes and cleanups. Of note are cleanups
of the extent status tree to fix potential races that could result in
the extent status tree getting corrupted under heavy simultaneous
allocation and deallocation to a single file"
Link: https://lore.kernel.org/all/202505161418.ec0d753f-lkp@intel.com/
* tag 'ext4_for_linus-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (52 commits)
ext4: Add a WARN_ON_ONCE for querying LAST_IN_LEAF instead
ext4: Simplify flags in ext4_map_query_blocks()
ext4: Rename and document EXT4_EX_FILTER to EXT4_EX_QUERY_FILTER
ext4: Simplify last in leaf check in ext4_map_query_blocks
ext4: Unwritten to written conversion requires EXT4_EX_NOCACHE
ext4: only dirty folios when data journaling regular files
ext4: Add atomic block write documentation
ext4: Enable support for ext4 multi-fsblock atomic write using bigalloc
ext4: Add multi-fsblock atomic write support with bigalloc
ext4: Add support for EXT4_GET_BLOCKS_QUERY_LEAF_BLOCKS
ext4: Make ext4_meta_trans_blocks() non-static for later use
ext4: Check if inode uses extents in ext4_inode_can_atomic_write()
ext4: Document an edge case for overwrites
jbd2: remove journal_t argument from jbd2_superblock_csum()
jbd2: remove journal_t argument from jbd2_chksum()
ext4: remove sb argument from ext4_superblock_csum()
ext4: remove sbi argument from ext4_chksum()
ext4: enable large folio for regular file
ext4: make online defragmentation support large folios
ext4: make the writeback path support large folios
...
Linus Torvalds [Wed, 28 May 2025 19:08:26 +0000 (12:08 -0700)]
Merge tag 'ntfs3_for_6.16' of https://github.com/Paragon-Software-Group/linux-ntfs3
Pull ntfs updates from Konstantin Komarov:
"Added:
- missing direct_IO in ntfs_aops_cmpr
- handling of hdr_first_de() return value
Fixed:
- handling of InitializeFileRecordSegment operation.
Removed:
- ability to change compression on mounted volume
- redundant NULL check"
* tag 'ntfs3_for_6.16' of https://github.com/Paragon-Software-Group/linux-ntfs3:
fs/ntfs3: remove ability to change compression on mounted volume
fs/ntfs3: Fix handling of InitializeFileRecordSegment
fs/ntfs3: Add missing direct_IO in ntfs_aops_cmpr
fs/ntfs3: handle hdr_first_de() return value
fs/ntfs3: Drop redundant NULL check
Linus Torvalds [Wed, 28 May 2025 19:02:04 +0000 (12:02 -0700)]
Merge tag 'exfat-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Fix xfstests generic/482 test failure
- Fix double free in delayed_free
* tag 'exfat-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: do not clear volume dirty flag during sync
exfat: fix double free in delayed_free
Linus Torvalds [Wed, 28 May 2025 18:59:25 +0000 (11:59 -0700)]
Merge tag 'for-6.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A fixup to the xarray conversion sent in the main 6.16 batch. It was
not included because it would cause rebase/refresh of like 80 patches,
right before sending the early pull request last week.
It's fixing a bug when zoned mode is enabled on btrfs so it's not
affecting most people"
* tag 'for-6.16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't drop a reference if btrfs_check_write_meta_pointer() fails
Linus Torvalds [Wed, 28 May 2025 16:46:39 +0000 (09:46 -0700)]
Merge tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
Linus Torvalds [Wed, 28 May 2025 16:17:20 +0000 (09:17 -0700)]
Merge tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output
- New driver: Amlogic C3 ISP
- New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10
- amlogic: c3-mipi-csi2: Handle 64-bits division
- a fix for 64-bits division at the amlogic c3-mipi-csi2 driver
- Changes at atomisp to support mainline mt9m114 driver and remove
deprecated GPIO APIs
- various cleanups, fixes and enhancements
* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Add get_image_fmt ops
media: rkvdec: Initialize the m2m context before the controls
media: rkvdec: h264: Limit minimum profile to constrained baseline
media: mediatek: jpeg: support 34bits
media: verisilicon: Free post processor buffers on error
media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
media: amlogic: c3-mipi-csi2: Handle 64-bits division
media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
media: uvcvideo: Fix deferred probing error
media: uvcvideo: Rollback non processed entities on error
media: uvcvideo: Send control events for partial succeeds
media: uvcvideo: Return the number of processed controls
media: uvcvideo: Do not turn on the camera for some ioctls
media: uvcvideo: Make power management granular
media: uvcvideo: Increase/decrease the PM counter per IOCTL
media: uvcvideo: Create uvc_pm_(get|put) functions
media: uvcvideo: Keep streaming state in the file handle
Documentation: media: Add documentation file c3-isp.rst
Documentation: media: Add documentation file metafmt-c3-isp.rst
...
Linus Torvalds [Wed, 28 May 2025 15:34:19 +0000 (08:34 -0700)]
Merge tag 'audit-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
- Always record AUDIT_ANOM events when auditing is enabled.
Prior to this patch we only recorded AUDIT_ANOM events if auditing
was enabled and the admin/distro had explicitly configured audit
beyond the defaults. Considering that AUDIT_ANOM events are anomolous
events considered to be "security relevant", it seems wise to record
these events as long as auditing is enabled, even if the system is
running with a default audit configuration.
- Mark the audit_log_vformat() function with the __printf() attribute
to quiet GCC.
* tag 'audit-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: record AUDIT_ANOM_* events regardless of presence of rules
audit: mark audit_log_vformat() with __printf() attribute
Linus Torvalds [Wed, 28 May 2025 15:28:58 +0000 (08:28 -0700)]
Merge tag 'selinux-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Reduce the SELinux impact on path walks.
Add a small directory access cache to the per-task SELinux state.
This cache allows SELinux to cache the most recently used directory
access decisions in order to avoid repeatedly querying the AVC on
path walks where the majority of the directories have similar
security contexts/labels.
My performance measurements are crude, but prior to this patch the
time spent in SELinux code on a 'make allmodconfig' run was 103% that
of __d_lookup_rcu(), and with this patch the time spent in SELinux
code dropped to 63% of __d_lookup_rcu(), a ~40% improvement.
Additional improvments can be expected in the future, but those will
require additional SELinux policy/toolchain support.
- Add support for wildcards in genfscon policy statements.
This patch allows for wildcards in the genfscon patch matching logic
as opposed to the prefix matching that was used prior to this change.
Adding wilcard support allows for more expressive and efficient path
matching in the policy which is especially helpful for sysfs, and has
resulted in a ~15% boot time reduction in Android.
SELinux policies can opt into wilcard matching by using the
"genfs_seclabel_wildcard" policy capability.
- Unify the error/OOM handling of the SELinux network caches.
A failure to allocate memory for the SELinux network caches isn't
fatal as the object label can still be safely returned to the caller,
it simply means that we cannot add the new data to the cache, at
least temporarily. This patch corrects this behavior for the
InfiniBand cache and does some minor cleanup.
- Minor improvements around constification, 'likely' annotations, and
removal of bogus comments.
* tag 'selinux-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix the kdoc header for task_avdcache_update
selinux: remove a duplicated include
selinux: reduce path walk overhead
selinux: support wildcard match in genfscon
selinux: drop copy-paste comment
selinux: unify OOM handling in network hashtables
selinux: add likely hints for fast paths
selinux: contify network namespace pointer
selinux: constify network address pointer
Linus Torvalds [Wed, 28 May 2025 15:17:19 +0000 (08:17 -0700)]
Merge tag 'lsm-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm update from Paul Moore:
"One minor LSM framework patch to move the selinux_netlink_send() hook
under the CONFIG_SECURITY_NETWORK Kconfig knob"
* tag 'lsm-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: Move security_netlink_send to under CONFIG_SECURITY_NETWORK
Linus Torvalds [Wed, 28 May 2025 15:12:33 +0000 (08:12 -0700)]
Merge tag 'integrity-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Carrying the IMA measurement list across kexec is not a new feature,
but is updated to address a couple of issues:
- Carrying the IMA measurement list across kexec required knowing
apriori all the file measurements between the "kexec load" and
"kexec execute" in order to measure them before the "kexec load".
Any delay between the "kexec load" and "kexec exec" exacerbated the
problem.
- Any file measurements post "kexec load" were not carried across
kexec, resulting in the measurement list being out of sync with the
TPM PCR.
With these changes, the buffer for the IMA measurement list is still
allocated at "kexec load", but copying the IMA measurement list is
deferred to after quiescing the TPM.
Two new kexec critical data records are defined"
* tag 'integrity-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: do not copy measurement list to kdump kernel
ima: measure kexec load and exec events as critical data
ima: make the kexec extra memory configurable
ima: verify if the segment size has changed
ima: kexec: move IMA log copy from kexec load to execute
ima: kexec: define functions to copy IMA log at soft boot
ima: kexec: skip IMA segment validation after kexec soft reboot
kexec: define functions to map and unmap segments
ima: define and call ima_alloc_kexec_file_buf()
ima: rename variable the seq_file "file" to "ima_kexec_file"
- Kbuild: induce full rebuilds when dependencies change with GCC
plugins, the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
* tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
Revert "hardening: Disable GCC randstruct for COMPILE_TEST"
lib/tests: randstruct: Add deep function pointer layout test
lib/tests: Add randstruct KUnit test
randstruct: gcc-plugin: Remove bogus void member
net: qede: Initialize qede_ll_ops with designated initializer
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
md/bcache: Mark __nonstring look-up table
integer-wrap: Force full rebuild when .scl file changes
randstruct: Force full rebuild when seed changes
gcc-plugins: Force full rebuild when plugins change
kbuild: Switch from -Wvla to -Wvla-larger-than=1
hardening: simplify CONFIG_CC_HAS_COUNTED_BY
overflow: Fix direct struct member initialization in _DEFINE_FLEX()
kunit/overflow: Add tests for STACK_FLEX_ARRAY_SIZE() helper
overflow: Add STACK_FLEX_ARRAY_SIZE() helper
input/joystick: magellan: Mark __nonstring look-up table const
watchdog: exar: Shorten identity name to fit correctly
mod_devicetable: Enlarge the maximum platform_device_id name length
overflow: Clarify expectations for getting DEFINE_FLEX variable sizes
compiler_types: Identify compiler versions for __builtin_dynamic_object_size
...
Linus Torvalds [Wed, 28 May 2025 14:45:39 +0000 (07:45 -0700)]
Merge tag 'seccomp-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- selftest fixes for arm32 (Neill Kapron, Terry Tritton)
- documentation typo fix (Sumanth Gavini)
* tag 'seccomp-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: seccomp: Fix "performace" to "performance"
selftests/seccomp: fix negative_ENOSYS tracer tests on arm32
selftests/seccomp: fix syscall_restart test for arm compat
On linux-next, build for bpf selftest displays a warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/if_xdp.h'
differs from latest version at 'include/uapi/linux/if_xdp.h'.
Commit 8066e388be48 ("net: add UAPI to the header guard in various network headers")
changed the header guard from _LINUX_IF_XDP_H to _UAPI_LINUX_IF_XDP_H
in include/uapi/linux/if_xdp.h.
To resolve the warning, update tools/include/uapi/linux/if_xdp.h
to align with the changes in include/uapi/linux/if_xdp.h
Fixes: 8066e388be48 ("net: add UAPI to the header guard in various network headers") Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Closes: https://lore.kernel.org/all/c2bc466d-dff2-4d0d-a797-9af7f676c065@linux.ibm.com/ Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com> Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/20250527054138.1086006-1-skb99@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Phil Sutter [Tue, 27 May 2025 09:41:17 +0000 (11:41 +0200)]
selftests: netfilter: Fix skip of wildcard interface test
The script is supposed to skip wildcard interface testing if unsupported
by the host's nft tool. The failing check caused script abort due to
'set -e' though. Fix this by running the potentially failing nft command
inside the if-conditional pipe.
Fixes: 73db1b5dab6f ("selftests: netfilter: Torture nftables netdev hooks") Signed-off-by: Phil Sutter <phil@nwl.cc> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20250527094117.18589-1-phil@nwl.cc Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Horatiu Vultur [Fri, 23 May 2025 08:27:16 +0000 (10:27 +0200)]
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
We have noticed that when PHY timestamping is enabled, L2 frames seems
to be modified by changing two 2 bytes with a value of 0. The place were
these 2 bytes seems to be random(or I couldn't find a pattern). In most
of the cases the userspace can ignore these frames but if for example
those 2 bytes are in the correction field there is nothing to do. This
seems to happen when configuring the HW for IPv4 even that the flow is
not enabled.
These 2 bytes correspond to the UDPv4 checksum and once we don't enable
clearing the checksum when using L2 frames then the frame doesn't seem
to be changed anymore.
Faicker Mo [Fri, 23 May 2025 03:41:43 +0000 (03:41 +0000)]
net: openvswitch: Fix the dead loop of MPLS parse
The unexpected MPLS packet may not end with the bottom label stack.
When there are many stacks, The label count value has wrapped around.
A dead loop occurs, soft lockup/CPU stuck finally.
stack backtrace:
UBSAN: array-index-out-of-bounds in /build/linux-0Pa0xK/linux-5.15.0/net/openvswitch/flow.c:662:26
index -1 is out of range for type '__be32 [3]'
CPU: 34 PID: 0 Comm: swapper/34 Kdump: loaded Tainted: G OE 5.15.0-121-generic #131-Ubuntu
Hardware name: Dell Inc. PowerEdge C6420/0JP9TF, BIOS 2.12.2 07/14/2021
Call Trace:
<IRQ>
show_stack+0x52/0x5c
dump_stack_lvl+0x4a/0x63
dump_stack+0x10/0x16
ubsan_epilogue+0x9/0x36
__ubsan_handle_out_of_bounds.cold+0x44/0x49
key_extract_l3l4+0x82a/0x840 [openvswitch]
? kfree_skbmem+0x52/0xa0
key_extract+0x9c/0x2b0 [openvswitch]
ovs_flow_key_extract+0x124/0x350 [openvswitch]
ovs_vport_receive+0x61/0xd0 [openvswitch]
? kernel_init_free_pages.part.0+0x4a/0x70
? get_page_from_freelist+0x353/0x540
netdev_port_receive+0xc4/0x180 [openvswitch]
? netdev_port_receive+0x180/0x180 [openvswitch]
netdev_frame_hook+0x1f/0x40 [openvswitch]
__netif_receive_skb_core.constprop.0+0x23a/0xf00
__netif_receive_skb_list_core+0xfa/0x240
netif_receive_skb_list_internal+0x18e/0x2a0
napi_complete_done+0x7a/0x1c0
bnxt_poll+0x155/0x1c0 [bnxt_en]
__napi_poll+0x30/0x180
net_rx_action+0x126/0x280
? bnxt_msix+0x67/0x80 [bnxt_en]
handle_softirqs+0xda/0x2d0
irq_exit_rcu+0x96/0xc0
common_interrupt+0x8e/0xa0
</IRQ>
Fixes: fbdcdd78da7c ("Change in Openvswitch to support MPLS label depth of 3 in ingress direction") Signed-off-by: Faicker Mo <faicker.mo@zenlayer.com> Acked-by: Ilya Maximets <i.maximets@ovn.org> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://patch.msgid.link/259D3404-575D-4A6D-B263-1DF59A67CF89@zenlayer.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
calipso: Don't call calipso functions for AF_INET sk.
syzkaller reported a null-ptr-deref in txopt_get(). [0]
The offset 0x70 was of struct ipv6_txoptions in struct ipv6_pinfo,
so struct ipv6_pinfo was NULL there.
However, this never happens for IPv6 sockets as inet_sk(sk)->pinet6
is always set in inet6_create(), meaning the socket was not IPv6 one.
The root cause is missing validation in netlbl_conn_setattr().
netlbl_conn_setattr() switches branches based on struct
sockaddr.sa_family, which is passed from userspace. However,
netlbl_conn_setattr() does not check if the address family matches
the socket.
The syzkaller must have called connect() for an IPv6 address on
an IPv4 socket.
We have a proper validation in tcp_v[46]_connect(), but
security_socket_connect() is called in the earlier stage.
Let's copy the validation to netlbl_conn_setattr().
Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.") Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: John Cheung <john.cs.hey@gmail.com> Closes: https://lore.kernel.org/netdev/CAP=Rh=M1LzunrcQB1fSGauMrJrhL6GGps5cPAKzHJXj6GQV+-g@mail.gmail.com/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paul Moore <paul@paul-moore.com> Link: https://patch.msgid.link/20250522221858.91240-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
Savino says:
"We are writing to report that this recent patch
(141d34391abbb315d68556b7c67ad97885407547)
can be bypassed, and a UAF can still occur when HFSC is utilized with
NETEM.
The patch only checks the cl->cl_nactive field to determine whether
it is the first insertion or not, but this field is only
incremented by init_vf.
By using HFSC_RSC (which uses init_ed), it is possible to bypass the
check and insert the class twice in the eltree.
Under normal conditions, this would lead to an infinite loop in
hfsc_dequeue for the reasons we already explained in this report.
However, if TBF is added as root qdisc and it is configured with a
very low rate,
it can be utilized to prevent packets from being dequeued.
This behavior can be exploited to perform subsequent insertions in the
HFSC eltree and cause a UAF."
To fix both the UAF and the infinite loop, with netem as an hfsc child,
check explicitly in hfsc_enqueue whether the class is already in the eltree
whenever the HFSC_RSC flag is set.
Also add a TDC test to reproduce the UAF scenario.
====================
Pedro Tammela [Thu, 22 May 2025 18:14:48 +0000 (15:14 -0300)]
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
Reproduce the UAF scenario where netem is a child of HFSC and HFSC
is configured to use the eltree. In such case, this TDC test would
cause the HFSC class to be added to the eltree twice resulting
in a UAF.
Pedro Tammela [Thu, 22 May 2025 18:14:47 +0000 (15:14 -0300)]
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
Savino says:
"We are writing to report that this recent patch
(141d34391abbb315d68556b7c67ad97885407547) [1]
can be bypassed, and a UAF can still occur when HFSC is utilized with
NETEM.
The patch only checks the cl->cl_nactive field to determine whether
it is the first insertion or not [2], but this field is only
incremented by init_vf [3].
By using HFSC_RSC (which uses init_ed) [4], it is possible to bypass the
check and insert the class twice in the eltree.
Under normal conditions, this would lead to an infinite loop in
hfsc_dequeue for the reasons we already explained in this report [5].
However, if TBF is added as root qdisc and it is configured with a
very low rate,
it can be utilized to prevent packets from being dequeued.
This behavior can be exploited to perform subsequent insertions in the
HFSC eltree and cause a UAF."
To fix both the UAF and the infinite loop, with netem as an hfsc child,
check explicitly in hfsc_enqueue whether the class is already in the eltree
whenever the HFSC_RSC flag is set.
Fixes: 37d9cf1a3ce3 ("sched: Fix detection of empty queues in child qdiscs") Reported-by: Savino Dicanosa <savy@syst3mfailure.io> Reported-by: William Liu <will@willsroot.io> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://patch.msgid.link/20250522181448.1439717-2-pctammela@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
1. Active traffic on the leaf node must be stopped before its send queue
is reassigned to the parent. This patch resolves the issue by marking
the node as 'Inner'.
2. During a system reboot, the interface receives TC_HTB_LEAF_DEL
and TC_HTB_LEAF_DEL_LAST callbacks to delete its HTB queues.
In the case of TC_HTB_LEAF_DEL_LAST, although the same send queue
is reassigned to the parent, the current logic still attempts to update
the real number of queues, leadning to below warnings
New queues can't be registered after device unregistration.
WARNING: CPU: 0 PID: 6475 at net/core/net-sysfs.c:1714
netdev_queue_update_kobjects+0x1e4/0x200
Fixes: 5e6808b4c68d ("octeontx2-pf: Add support for HTB offload") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250522115842.1499666-1-hkelam@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hariprasad Kelam [Thu, 22 May 2025 09:47:41 +0000 (15:17 +0530)]
octeontx2-pf: QOS: Perform cache sync on send queue teardown
QOS is designed to create a new send queue whenever a class
is created, ensuring proper shaping and scheduling. However,
when multiple send queues are created and deleted in a loop,
SMMU errors are observed.
This patch addresses the issue by performing an data cache sync
during the teardown of QOS send queues.
Haiyang Zhang [Mon, 19 May 2025 16:20:36 +0000 (09:20 -0700)]
net: mana: Add support for Multi Vports on Bare metal
To support Multi Vports on Bare metal, increase the device config response
version. And, skip the register HW vport, and register filter steps, when
the Bare metal hostmode is set.
Linus Torvalds [Wed, 28 May 2025 04:12:50 +0000 (21:12 -0700)]
Merge tag 'sched_ext-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- More in-kernel idle CPU selection improvements. Expand topology
awareness coverage add scx_bpf_select_cpu_and() to allow more
flexibility. The idle CPU selection kfuncs can now be called from
unlocked contexts too.
- A bunch of reorganization changes to lay the foundation for multiple
hierarchical scheduler support. This isn't ready yet and the included
changes don't make meaningful behavior differences. One notable
change is replacing some static_key tests with dynamic tests as the
test results may differ depending on the scheduler instance. This
isn't expected to cause meaningful performance difference.
- Other minor and doc updates.
- There were multiple patches in for-6.15-fixes which conflicted with
changes in for-6.16. for-6.15-fixes were pulled three times into
for-6.16 to resolve the conflicts.
* tag 'sched_ext-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (49 commits)
sched_ext: Call ops.update_idle() after updating builtin idle bits
sched_ext, docs: convert mentions of "CFS" to "fair-class scheduler"
selftests/sched_ext: Update test enq_select_cpu_fails
sched_ext: idle: Consolidate default idle CPU selection kfuncs
selftests/sched_ext: Add test for scx_bpf_select_cpu_and() via test_run
sched_ext: idle: Allow scx_bpf_select_cpu_and() from unlocked context
sched_ext: idle: Validate locking correctness in scx_bpf_select_cpu_and()
sched_ext: Make scx_kf_allowed_if_unlocked() available outside ext.c
sched_ext, docs: add label
sched_ext: Explain the temporary situation around scx_root dereferences
sched_ext: Add @sch to SCX_CALL_OP*()
sched_ext: Cleanup [__]scx_exit/error*()
sched_ext: Add @sch to SCX_CALL_OP*()
sched_ext: Clean up scx_root usages
Documentation: scheduler: Changed lowercase acronyms to uppercase
sched_ext: Avoid NULL scx_root deref in __scx_exit()
sched_ext: Add RCU protection to scx_root in DSQ iterator
sched_ext: Clean up SCX_EXIT_NONE handling in scx_disable_workfn()
sched_ext: Move disable machinery into scx_sched
sched_ext: Move event_stats_cpu into scx_sched
...
Linus Torvalds [Wed, 28 May 2025 03:59:53 +0000 (20:59 -0700)]
Merge tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cgroup rstat shared the tracking tree across all controllers with the
rationale being that a cgroup which is using one resource is likely
to be using other resources at the same time (ie. if something is
allocating memory, it's probably consuming CPU cycles).
However, this turned out to not scale very well especially with memcg
using rstat for internal operations which made memcg stat read and
flush patterns substantially different from other controllers. JP
Kobryn split the rstat tree per controller.
- cgroup BPF support was hooking into cgroup init/exit paths directly.
Convert them to use a notifier chain instead so that other usages can
be added easily. The two of the patches which implement this are
mislabeled as belonging to sched_ext instead of cgroup. Sorry.
- Relatively minor cpuset updates
- Documentation updates
* tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier
sched_ext: Introduce cgroup_lifetime_notifier
cgroup: Minor reorganization of cgroup_create()
cgroup, docs: cpu controller's interaction with various scheduling policies
cgroup, docs: convert space indentation to tab indentation
cgroup: avoid per-cpu allocation of size zero rstat cpu locks
cgroup, docs: be specific about bandwidth control of rt processes
cgroup: document the rstat per-cpu initialization
cgroup: helper for checking rstat participation of css
cgroup: use subsystem-specific rstat locks to avoid contention
cgroup: use separate rstat trees for each subsystem
cgroup: compare css to cgroup::self in helper for distingushing css
cgroup: warn on rstat usage by early init subsystems
cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask()
cgroup/rstat: Improve cgroup_rstat_push_children() documentation
cgroup: fix goto ordering in cgroup_init()
cgroup: fix pointer check in css_rstat_init()
cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs
cgroup/cpuset: Fix obsolete comment in cpuset_css_offline()
cgroup/cpuset: Always use cpu_active_mask
...
Linus Torvalds [Wed, 28 May 2025 03:49:06 +0000 (20:49 -0700)]
Merge tag 'wq-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
"Fix statistic update race condition and a couple documentation
updates"
* tag 'wq-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix typo in comment
workqueue: Fix race condition in wq->stats incrementation
workqueue: Better document teardown for delayed_work
Linus Torvalds [Wed, 28 May 2025 03:43:35 +0000 (20:43 -0700)]
Merge tag 'sysctl-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move kern_table members out of kernel/sysctl.c
Moved a subset (tracing, panic, signal, stack_tracer and sparc) out
of the kern_table array. The goal is for kern_table to only have
sysctl elements. All this increases modularity by placing the
ctl_tables closer to where they are used while reducing the chances
of merge conflicts in kernel/sysctl.c.
- Fixed sysctl unit test panic by relocating it to selftests
* tag 'sysctl-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Close test ctl_headers with a for loop
sysctl: call sysctl tests with a for loop
sysctl: Add 0012 to test the u8 range check
sysctl: move u8 register test to lib/test_sysctl.c
sparc: mv sparc sysctls into their own file under arch/sparc/kernel
stack_tracer: move sysctl registration to kernel/trace/trace_stack.c
tracing: Move trace sysctls into trace.c
signal: Move signal ctl tables into signal.c
panic: Move panic ctl tables into panic.c
Linus Torvalds [Wed, 28 May 2025 03:40:36 +0000 (20:40 -0700)]
Merge tag 'm68k-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- One more strscpy() conversion
- Fix detection of real Mac II
- defconfig updates
* tag 'm68k-for-v6.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: defconfig: Update defconfigs for v6.15-rc1
m68k: mac: Fix macintosh_config for Mac II
m68k: Replace strcpy() with strscpy() in hardware_proc_show()
Linus Torvalds [Wed, 28 May 2025 03:36:30 +0000 (20:36 -0700)]
Merge tag 'for-linus-6.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A fix for running as a Xen dom0 on the iMX8QXP Arm platform
- An update of the xen.config adding XEN_UNPOPULATED_ALLOC for better
support of PVH dom0
- A fix of the Xen balloon driver when running without
CONFIG_XEN_UNPOPULATED_ALLOC
- A fix of the dm_op Xen hypercall on Arm needed to pass user space
buffers to the hypervisor in certain configurations
* tag 'for-linus-6.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/arm: call uaccess_ttbr0_enable for dm_op hypercall
xen/x86: fix initial memory balloon target
xen: enable XEN_UNPOPULATED_ALLOC as part of xen.config
xen: swiotlb: Wire up map_resource callback
Linus Torvalds [Wed, 28 May 2025 03:09:06 +0000 (20:09 -0700)]
Merge tag 'dma-mapping-6.16-2025-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
"New two step DMA mapping API, which is is a first step to a long path
to provide alternatives to scatterlist and to remove hacks, abuses and
design mistakes related to scatterlists.
This new approach optimizes some calls to DMA-IOMMU layer and cache
maintenance by batching them, reduces memory usage as it is no need to
store mapped DMA addresses to unmap them, and reduces some function
call overhead. It is a combination effort of many people, lead and
developed by Christoph Hellwig and Leon Romanovsky"
* tag 'dma-mapping-6.16-2025-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
docs: core-api: document the IOVA-based API
dma-mapping: add a dma_need_unmap helper
dma-mapping: Implement link/unlink ranges API
iommu/dma: Factor out a iommu_dma_map_swiotlb helper
dma-mapping: Provide an interface to allow allocate IOVA
iommu: add kernel-doc for iommu_unmap_fast
iommu: generalize the batched sync after map interface
dma-mapping: move the PCI P2PDMA mapping helpers to pci-p2pdma.h
PCI/P2PDMA: Refactor the p2pdma mapping helpers
Mina Almasry [Fri, 23 May 2025 23:05:23 +0000 (23:05 +0000)]
net: devmem: ksft: upgrade rx test to send 1K data
The current test just sends "hello\nworld" and verifies that is the
string received on the RX side. That is fine, but improve the test a bit
by sending 1K data. The test should be improved further to send more
data, but for now this should be a welcome improvement.
The test will send a repeating pattern of 0x01, 0x02, ... 0x06. The
ncdevmem `-v 7` flag will verify this pattern. ncdevmem will provide
useful debugging info when the test fails, such as the frags received
and verified fine, and which frag exactly failed, what was the expected
byte pattern, and what is the actual byte pattern received. All this
debug information will be useful when the test fails.
Mina Almasry [Fri, 23 May 2025 23:05:22 +0000 (23:05 +0000)]
net: devmem: ksft: add 5 tuple FS support
ncdevmem supports drivers that are limited to either 3-tuple or 5-tuple
FS support, but the ksft is currently 3-tuple only. Support drivers that
have 5-tuple FS supported by adding a ksft arg.
Signed-off-by: Mina Almasry <almasrymina@google.com>
fix 5-tuple
Mina Almasry [Fri, 23 May 2025 23:05:20 +0000 (23:05 +0000)]
net: devmem: ksft: add ipv4 support
ncdevmem supports both ipv4 and ipv6, but the ksft is currently
ipv6-only. Propagate the ipv4 support to the ksft, so that folks that
are limited to these networks can also test.
Mina Almasry [Fri, 23 May 2025 23:05:17 +0000 (23:05 +0000)]
net: devmem: move list_add to net_devmem_bind_dmabuf.
It's annoying for the list_add to be outside net_devmem_bind_dmabuf, but
the list_del is in net_devmem_unbind_dmabuf. Make it consistent by
having both the list_add/del be inside the net_devmem_[un]bind_dmabuf.
Cc: ap420073@gmail.com Signed-off-by: Mina Almasry <almasrymina@google.com> Tested-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Link: https://patch.msgid.link/20250523230524.1107879-2-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / thirdparty / linux.git / log
