Joshua Watt [Thu, 10 Aug 2017 02:18:32 +0000 (21:18 -0500)]
externalsrc: Handle .git not being a directory
Use git rev-parse to determine the location of the .git directory, in
case it is not an immediate child of EXTERNALSRC (e.g. when using
submodules). In the event git can't resolve the .git directory, fall
back to the non-git method for hashing.
Stefan Agner [Tue, 29 Aug 2017 09:54:00 +0000 (02:54 -0700)]
image.bbclass: delete DATE variable too
When creating a custom image which uses the DATE variable the basehash
seems to change every day and lead to errors such as:
ERROR: console-tdx-image-2.7.6-r0 do_image_customimg: Error executing a python function in exec_python_func() autogenerated:
The stack trace of python calls that resulted in this exception/failure was:
File: 'exec_python_func() autogenerated', lineno: 2, function: <module>
0001:
*** 0002:set_image_size(d)
...
Add DATE to the variables which should not get expanded early and to the
vardepsexclude list for the image task.
Max Krummenacher [Sat, 12 Aug 2017 17:20:59 +0000 (19:20 +0200)]
run-postinsts: do not reload daemon configuration
In case a systemd service disables itself while init is still in its
boot sequence the reloading of the service files can be problematic.
In that case: It seems that systemd looses the state of .device units,
and some services depend on such units (namely serial consoles such as
serial-getty@ttymxc0.service). As a result no getty is spawned on the
affected serial tty.
After a power-cycle the second boot (which does not disable services)
succeeds.
The following sequence shows this problem:
| Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service.
| Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading.
| ...
| And then the failing one:
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0.
| Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts.
(the time has been updated between this two events, but that does not
influence the issue)
Using --no-reload in the service file avoids the "Reloading." message
above and seems to not cause such issues anymore.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 4a425d05bac5dcba023b67aa3d726f7e7869404f) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Max Krummenacher [Sat, 12 Aug 2017 17:20:58 +0000 (19:20 +0200)]
opkg-configure: do not reload daemon configuration
In case a systemd service disables itself while init is still in its
boot sequence the reloading of the service files can be problematic.
In that case: It seems that systemd looses the state of .device units,
and some services depend on such units (namely serial consoles such as
serial-getty@ttymxc0.service). As a result no getty is spawned on the
affected serial tty.
After a power-cycle the second boot (which does not disable services)
succeeds.
The following sequence shows this problem:
| Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service.
| Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading.
| ...
| And then the failing one:
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0.
| Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts.
(the time has been updated between this two events, but that does not
influence the issue)
Using --no-reload in the service file avoids the "Reloading." message
above and seems to not cause such issues anymore.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 16b7b455ee40fd1be5bb9aacf24b106df0d9325e) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Max Krummenacher [Sat, 12 Aug 2017 17:20:57 +0000 (19:20 +0200)]
dpkg-configure: do not reload daemon configuration
In case a systemd service disables itself while init is still in its
boot sequence the reloading of the service files can be problematic.
In that case: It seems that systemd looses the state of .device units,
and some services depend on such units (namely serial consoles such as
serial-getty@ttymxc0.service). As a result no getty is spawned on the
affected serial tty.
After a power-cycle the second boot (which does not disable services)
succeeds.
The following sequence shows this problem:
| Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service.
| Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading.
| ...
| And then the failing one:
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0.
| Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts.
(the time has been updated between this two events, but that does not
influence the issue)
Using --no-reload in the service file avoids the "Reloading." message
above and seems to not cause such issues anymore.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
(cherry picked from commit 94fabe4b03e899d8876027ee2ced649737a9e522) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa [Sat, 12 Aug 2017 00:31:59 +0000 (02:31 +0200)]
rm_work: fix build break for do_image_complete
* since following commit:
commit 2ff9d40dc88d43567472218cf3d3faf414398c71
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Sun Jul 30 16:06:57 2017 +0100
image/rm_work: Promote do_image_complete to be more sstate like
it's because for $i 1.0-r0.do_image_complete.228730130ba309f85b73b72222ba11d7.raspberrypi3
there will be first SSTATETASK in $j do_deploy, so the sed call doesn't replace anything
It might be different order of SSTATETASKS in my builds (it might work only when
do_image_complete is the first one in the list), but here:
SSTATETASKS="do_deploy do_image_complete do_image_qa do_package do_package_qa do_package_write_ipk do_packagedata do_populate_lic do_populate_sdk do_populate_sdk_ext do_populate_sysroot"
* Refreshed the following patches:
1. 0001-Makefile.am-don-t-hardcode-libtool-name-when-running.patch
Extended patch to include fix for libgstallocators
2. 0001-Prepend-PKG_CONFIG_SYSROOT_DIR-to-pkg-config-output.patch
Updated to apply to 1.12.2
3. gstreamer-gl.pc.in-don-t-append-GL_CFLAGS-to-CFLAGS.patch
Updated to apply to 1.12.2
* Removed license checks in tta directory as it doesn't exist anymore.
* In 1.12.0, old unsupported plugins were removed. As a result, the
list of unsupported plugins was removed.
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Version 1.12 introduces support for libdw (provided by elfutils).
libdw adds source lines & numbers to backtraces. A new "dw"
packageconfig added for enabling/disabling this feature.
In addition, the old patch for deterministic unwind configuration
was replaced with one that also allows the same for the dw
configuration. This new patch was also submitted to bugzilla.
* Leftover docbook cruft was removed, meaning that the
"--disable-docbook" configure switch is gone.
distrodata.bbclass: add UPSTREAM_VERSION_UNKNOWN and UPSTREAM_CHECK_UNRELIABLE
These are optional per-recipe variables with the following meaning:
UPSTREAM_VERSION_UNKNOWN - set if the upstream version check fails reliably,
e.g. absent git tags, or weird version format used on our or on upstream side.
If this variable is not set and version check fails, or if it is set and
the version check succeeds, then the checkpkg selftest for the recipe will fail.
UPSTREAM_CHECK_UNRELIABLE - set if the upstream check cannot be reliably performed
due to transient network failures, or server behaving weirdly. This one should be used
sparingly, as it completely excludes a recipe from upstream checking, and thus
we don't get automatically notified about new upstream releases.
Also the upstream status string in the checkpkg csv output is clarified with the following
possible values:
MATCH - recipe is providing the latest upstream version
UPDATE - there is a new version released by upstream, recipe should be updated
CHECK_IS_UNRELIABLE - an upstream check was skipped as requested by recipe
via UPSTREAM_CHECK_UNRELIABLE
UNKNOWN - upstream version check was performed, but the upstream verison could
not be determined. The recipe acknowledges this via UPSTREAM_VERSION_UNKNOWN setting.
UNKNWON_BROKEN - same as previous, but the recipe does not include the acknowledgement
and should be fixed.
KNOWN_BROKEN - upstream check worked, but recipe claims it shouldn't; to fix this
remove UPSTREAM_VERSION_UNKNOWN from recipe.
Error log:
ERROR: core-image-sato-1.0-r0 do_populate_sdk: Could not invoke dnf.
Command '/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/recipe-sysroot-native/usr/bin/dnf -y -c
/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/sdk/image/opt/poky/2.3/sysroots/i586-poky-linux/etc/dnf/dnf.conf
--setopt=reposdir=/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/sdk/image/opt/poky/2.3/sysroots/i586-poky-linux/etc/yum.repos.d
--repofrompath=oe-repo,/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
--installroot=/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/sdk/image/opt/poky/2.3/sysroots/i586-poky-linux
--setopt=logdir=/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/temp
-x psplash --nogpgcheck install run-postinsts dnf
packagegroup-core-x11-base packagegroup-core-ssh-dropbear
packagegroup-core-standalone-sdk-target packagegroup-base-extended
packagegroup-core-x11-sato psplash packagegroup-core-boot rpm' returned 1:
Unable to detect release version (use '--releasever' to specify release version)
Added oe-repo repo from
/buildarea1/poky/build/tmp/work/qemux86-poky-linux/core-image-sato/1.0-r0/oe-rootfs-repo
Last metadata expiration check: 0:00:00 ago on Thu 10 Aug 2017 09:26:32 AM UTC.
No package psplash available.
Error: Unable to find a match
Add handling package exclusions to do_populate_sdk. The code copies from
do_rootfs in image.bbclass.
Richard Purdie [Wed, 9 Aug 2017 11:58:39 +0000 (12:58 +0100)]
bitbake: cooker: Ignore common bitbake files for the parse cache invalidation
Writes to the cookerdaemon log and/or the lockfile were meaning the parser
cache was always being invalidated and reparsed. This is unnecessary so
spot accesses to these two common cases and ignore the files from a reparse
perspective.
This doesn't remove many sources of reparse but does improve several
common cases.
Add a proper function for clearing the mtime cache. Clean up the inotify
event overflow case to err on the side of caution and clear any potentially
now out of sync caches.
Richard Purdie [Wed, 9 Aug 2017 11:54:34 +0000 (12:54 +0100)]
bitbake: cooker: Ensure we handle inotify before running the next command
The inotify watch events are handled "at idle" which could in theory mean
a command could run before any preceeding inotify events have been processed.
This leads to a theoretical race window where those events may have a
signficicant effect on the command.
Add a mechanism to allow us to ensure all pending events are processed before
running commands.
Richard Purdie [Wed, 9 Aug 2017 11:53:06 +0000 (12:53 +0100)]
bitbake: cooker: Track directories searched for bbappend/bb files
Some of the directories searched by BBFILES are not currently being added
to the inotify watch list. This can mean that added append files are not
noticed leading to misleading metadata results when using
BB_SERVER_TIMEOUT != 0.
We use glob to expand the BBFILES references and without writing our own
implentation, figuring out the directories it searches is hard. We use
some horrible hacks here to intecept the listdir calls, I'm open
to better ways to handle this but this does ensure we have the right
watches set.
Richard Purdie [Tue, 8 Aug 2017 19:55:21 +0000 (20:55 +0100)]
bitbake: server/process: Ensure we don't loop on client EOFError
The server currently crashes if we hit an EOFError due to controllersock
still being in ready and the continue meaning ready isn't re-evaluated.
Setting the value to False can mean the shutdown code doesn't handle the
situation cleanly.
Clear ready to avoid the crash/loop instead and handle any OSError whilst
we're in here.
Richard Purdie [Fri, 11 Aug 2017 07:10:33 +0000 (08:10 +0100)]
image-prelink: Disable for musl images
For some reason prelink was refusing to prelink musl images but now sometimes
does modify the binaries. Since musl has no support for this, such images
end up broken and unable to boot.
To avoid this, be explicit and only apply prelinking for libc-glibc.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: He Zhe <zhe.he@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The proposed openssl 1.1 patches are here:
https://github.com/openssh/openssh-portable/pull/48
Openssl maintainers are not in a hurry to get 1.1 support in;
if it doesn't show up within reasonable time, we can take a patch
from Fedora:
http://lists.mindrot.org/pipermail/openssh-unix-dev/2016-November/035454.html
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Existing openssl 1.0 recipe is renamed to openssl10; it will
continue to be provided for as long as upstream supports it
(and there are still several recipes which do not work with openssl
1.1 due to API differences).
A few files (such as openssl binary) are no longer installed by openssl 1.0,
because they clash with openssl 1.1.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton [Tue, 8 Aug 2017 14:51:18 +0000 (15:51 +0100)]
insane: remove unsafe-references-in-scripts check
We've already removed unsafe-references-in-binaries (which was fundamentally
broken) and nobody really cares about / and /usr being on different filesystems
anymore (at least if they, they're keeping very quiet and not fixing the bugs).
As this test was a minor detail in the scope of supporting separate / and /usr
which we don't support, it can be removed.
Juro Bystricky [Fri, 4 Aug 2017 22:40:54 +0000 (15:40 -0700)]
gcc7: fix potential segmentation fault
Under some rare circumstances we may end up with GCC segmentation fault.
This was observed with versions of sysmacros.h, which contain macros
with embedded warning messages :
When trying to actually display the warning, we may end up with a segmentation
fault instead. The reason is the actual warning message gets parsed (the text is
unquoted) and words in the message such as "not", "and" etc. are interpreted as
operators CPP_NOT, CPP_AND. When the time comes to display the warning, the code
uses wrong structure to access the "name" corresponding to the operators.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Merged revisions 64104,64117 via svnmerge from
svn+ssh://pythondev@svn.python.org/python/trunk
...
(see diff in setup.py)
It assigned libraries for multiprocessing module according
the host_platform, but not pass it to Extension.
In glibc, the following commit caused two definition of
sem_getvalue are different.
https://sourceware.org/git/?p=glibc.git;a=commit;h=042e1521c794a945edc43b5bfa7e69ad70420524
(see diff in nptl/sem_getvalue.c for detail)
`__new_sem_getvalue' is the latest sem_getvalue@@GLIBC_2.1
and `__old_sem_getvalue' is to compat the old version
sem_getvalue@GLIBC_2.0.
If not explicitly link to library pthread (-lpthread), it will
load glibc's sem_getvalue randomly at runtime.
Such as build python on linux x86_64 host and run the python
on linux x86_32 target. If not link library pthread, it caused
multiprocessing bounded semaphore could not work correctly.
...
>>> import multiprocessing
>>> pool_sema = multiprocessing.BoundedSemaphore(value=1)
>>> pool_sema.acquire()
True
>>> pool_sema.release()
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: semaphore or lock released too many times
...
And the semaphore issue also caused multiprocessing.Queue().put() hung.
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
context: Include a command line argument to run all except certain tests
A new command line argument (-R, which is the oposite of current -r) that allows
to run all test cases except the ones indicated through the command line.
Some command line examples:
* Run all except the distro test case:
$ oe-selftest -R distrodata
* Run all except the archiver test case and a single bblayers unit test
$ oe-selftest -R archiver bblayers.BitbakeLayers.test_bitbakelayers_add_remove
Ross Burton [Fri, 4 Aug 2017 15:30:14 +0000 (16:30 +0100)]
oeqa/runtime_test: use subtests in test_postinst_rootfs_and_boot
As this test has two nested loops and actually runs six times, use
UnitTest.subTest() so we can tell which instance is failing, and to run all
variations instead of failing on the first one.
Also set PACKAGE_CLASSES to just the type we need to reduce the verboseness of
the output, and consolidate the feature generation to be neater.
Signed-off-by: André Draszik <adraszik@tycoint.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Oliver Stäbler <oliver.staebler@bytesatwork.ch> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Joe Slater [Tue, 1 Aug 2017 19:36:53 +0000 (12:36 -0700)]
slang: fix terminfo related problems
Do not use the JD_TERMCAP macro since we cannot get the terminfo from
ncurses pkg-config variants, but fix the macro to not reference host
directories. Also add src/test/Makefile.in so that we can use -ltermcap
if we want to.
Since the recipe DEPENDS on ncurses, we assume terminfo is there.
Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new version fixes gperf 3.1 issues, so the update is included
in this patchset.
Modified patches are all rebases to the new version.
Deleted patches are backports, except 0016-make-test-dir-configurable.patch
which is obsolete in the new version (TEST_DIR define is no longer used anywhere).
--with-testdir is removed from configure for the same reason.
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jussi Kukkonen [Wed, 9 Aug 2017 07:14:59 +0000 (10:14 +0300)]
libinput: Upgrade 1.7.3 -> 1.8.1
New feature release, see
https://lists.freedesktop.org/archives/wayland-devel/2017-June/034286.html
for the major features. This is the last major release to support
autotools.
Configure flag "--enable-event-gui" changed name.
Configure flags no longer default to "auto": explicitly disable the
things that were previously automatically disabled.
Package the binaries into libinput-bin while being careful with
packaging as the main package gets renamed to libinput10.
Scott Rifenbark [Mon, 7 Aug 2017 23:59:41 +0000 (16:59 -0700)]
dev-manual: Converted sections for following best layer practices
The section about following best practices was more of a reference
section the way it was written. I recast the section and the
sub-sections such that it is a list of items to consider.
Also renamed the section to be more of an action section rather
than passive.
Scott Rifenbark [Mon, 7 Aug 2017 22:30:38 +0000 (15:30 -0700)]
dev-manual: Updates to "Using .bbappend Files in Your Layer"
I did some rewriting for clarity in the "Using .bbappend Files
in Your Layer" section. The section needed to be retitled so
focus on the layer aspect of .bbappend files. Also, while I
was in there, I did more work on the prose in general.
Also had to fix some links in the bsp, kernel, and ref manuals
that linked into the section whose name I changes.
Paul Eggleton [Mon, 7 Aug 2017 09:59:33 +0000 (11:59 +0200)]
bitbake: Revert "tinfoil: fix duplication of log messages"
In combination with the recent server reworking, this change actually
prevents messages sent from tasks from being logged properly. This will
of course give us the duplicated messages back, and I really hate to do
that effectively a second time, but that's better than seeing no error
at all in the case of a failure - we'll have to find the proper way of
avoiding the duplication that doesn't result in some messages going
missing.
Nathan Rossi [Wed, 2 Aug 2017 11:09:16 +0000 (21:09 +1000)]
llvm: Raise SkipRecipe exception for unsupported architectures
When parsing this recipe on an unsupported or non-mappable architecture
an error is generated despite no dependencies on the recipe. E.g.
ERROR: .../llvm_git.bb: cannot map 'microblazeel' to a supported llvm architecture
Instead of generating an error which might confuse users, raise a
SkipRecipe exception similar to other arch-style mapping functions (e.g.
go_map_arch). This avoids showing the error during parse, and prevents
the use of the recipe on unsupported targets. Resulting in an error like
so when trying to build llvm:
ERROR: Nothing PROVIDES 'llvm'
llvm was skipped: Cannot map 'microblazeel' to a supported LLVM architecture
Khem Raj [Tue, 1 Aug 2017 13:55:30 +0000 (06:55 -0700)]
mesa, llvm: Use native version of llvm-config
We have a variable YOCTO_ALTERNATE_EXE_PATH to point to
target sysroot, utilize this in mesa to use native version
of llvm-config to report values from target sysroot.
Khem Raj [Tue, 1 Aug 2017 13:55:28 +0000 (06:55 -0700)]
mesa: Use chrpath to delete rpaths
It adds native sysroot chrpath due to llvm-config in cross compiling
we can delete them via chrpath, since libs are in standard paths rpath
is really not needed
action: new bitbake-layer plugin to create a simple layer
Though the script bitbake-layers (from the bitbake project), this plugin
creates a simple layer with a example recipe, the latter with a single task
(do_build). Layer's license and priority is MIT and 6, respectively. Example
recipe and layer's priority can be specified through the command line.
Andrea Galbusera [Mon, 31 Jul 2017 09:19:18 +0000 (11:19 +0200)]
scripts/oe-publish-sdk: use hook to call git update-server-info
The author's initial intent was to use a git hook to automatically call
update-server-info, but the wrong hook type was chosen (post-update). A
post-commit one will do the job, hence allowing to drop the explicit call to
update-server-info.
Signed-off-by: Andrea Galbusera <gizero@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Andrea Galbusera [Mon, 31 Jul 2017 09:19:17 +0000 (11:19 +0200)]
devtool: sdk-update: fix pulling updates from git
Commit 4657bc9d165e51981e034e73e7b92552e873eef7 replaced the git pull logic with
the git fetch + git reset --hard combo, but resetting to HEAD does not really
pull in new commits from remote... Replace with resetting to the upstream branch
instead.
Signed-off-by: Andrea Galbusera <gizero@gmail.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Richard Röjfors <richard@puffinpack.se> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ed Bartosh [Sun, 30 Jul 2017 10:30:56 +0000 (13:30 +0300)]
x86-base.inc: enable live image type
live image type was replaced by hddimg recently. This made
NOHDD and NOISO options ineffective as they only influence
live builds. It also causes image building failure for
image sizes >4Gb
Returned back live image type and disabled building iso image.
This doesn't change result (hddimg is built), but it makes
NOHDD and NOISO working as expected.
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: California Sullivan <california.l.sullivan@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
automake: Add missing libtool tag for cppasm language
This is highlighted when CC is passing flags like -fPIE
which are stripped by libtool when building shared libs
and replaced with -fPIC, this actually results in CC
not matching the CC computed from cmdline created for
compiling and as a result libtool heuristic to compute
tags auotmatically fails.
Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patrick Ohly [Tue, 25 Jul 2017 14:40:59 +0000 (16:40 +0200)]
gettext.bbclass: also search for files in target sysroot
fwupd contains polkit policy files that it translates using polkit.its
and polkit.loc files that the next polkit release is going to
install (see https://github.com/hughsie/fwupd/issues/107).
In order to make that work with OE-core, the gettext tools must be
told to look also for files in the recipe-sysroot. Otherwise it only
uses the GETTEXTDATADIR set by the gettext-native tool wrappers, and
that only points to the files provided by gettext-native itself.
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: Ross Burton <ross.burton@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
| /mnt/a/oe/build/tmp/work/corei7-64-bec-linux/python3-pycairo/1.10.0-r2/recipe-sysroot-native/usr/bin/x86_64-bec-linu
x/x86_64-bec-linux-ld: src/cairomodule.c.1.o: relocation R_X86_64_PC32 against symbol `CairoError' can not be used whe
n making a shared object; recompile with -fPIC
External compilers will explicitly pass -fPIE -pie flags
unlike internal toolchain which does not use them, so the build
fails with external toolchains because, its passing these
flags to linker when building with -r option and fails to link
| /mnt/a/oe/build/tmp/work/corei7-64-bec-linux/go/1.8.3-r0/recipe-sysroot-native/usr/bin/x86_64-bec-linux/x86_64-bec-linux-ld: -r and -pie may not be used together
projects / thirdparty / openembedded / openembedded-core-contrib.git / log
