Previously, IOMMU core layer was forcing IOMMU_DOMAIN_DMA domain for
untrusted device. This always took precedence over driver's
def_domain_type(). Commit 59ddce4418da ("iommu: Reorganize
iommu_get_default_domain_type() to respect def_domain_type()") changed
the behaviour. Current code calls def_domain_type() but if it doesn't
return IOMMU_DOMAIN_DMA for untrusted device it throws error. This
results in IOMMU group (and potentially IOMMU itself) in undetermined
state.
This patch adds untrusted check in AMD IOMMU driver code. So that it
allows eGPUs behind Thunderbolt work again.
Fine tuning amd_iommu_def_domain_type() will be done later.
Userfaultfd unregister includes a step to remove wr-protect bits from all
the relevant pgtable entries, but that only covered an explicit
UFFDIO_UNREGISTER ioctl, not a close() on the userfaultfd itself. Cover
that too. This fixes a WARN trace.
The only user visible side effect is the user can observe leftover
wr-protect bits even if the user close()ed on an userfaultfd when
releasing the last reference of it. However hopefully that should be
harmless, and nothing bad should happen even if so.
This change is now more important after the recent page-table-check
patch we merged in mm-unstable (446dd9ad37d0 ("mm/page_table_check:
support userfault wr-protect entries")), as we'll do sanity check on
uffd-wp bits without vma context. So it's better if we can 100%
guarantee no uffd-wp bit leftovers, to make sure each report will be
valid.
Link: https://lore.kernel.org/all/000000000000ca4df20616a0fe16@google.com/ Fixes: f369b07c8614 ("mm/uffd: reset write protection when unregister with wp-mode") Analyzed-by: David Hildenbrand <david@redhat.com> Link: https://lkml.kernel.org/r/20240422133311.2987675-1-peterx@redhat.com Reported-by: syzbot+d8426b591c36b21c750e@syzkaller.appspotmail.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Nadav Amit <nadav.amit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
See commit f2c817bed58d ("mm: use memalloc_nofs_save in readahead path"),
ensure that page_cache_ra_order() do not attempt to reclaim file-backed
pages too, or it leads to a deadlock, found issue when test ext4 large
folio.
In commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
the logic to detect the machine architecture in the Makefile was changed
to use ARCH, and only fallback to uname -m if ARCH is unset. However the
tests of ARCH were not updated to account for the fact that ARCH is
"powerpc" for powerpc builds, not "ppc64".
Fix it by changing the checks to look for "powerpc", and change the
uname -m logic to convert "ppc64.*" into "powerpc".
With that fixed the following tests now build for powerpc again:
* protection_keys
* va_high_addr_switch
* virtual_address_range
* write_to_hugetlbfs
Link: https://lkml.kernel.org/r/20240506115825.66415-1-mpe@ellerman.id.au Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> [6.4+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With 'iommu=off' on the kernel command line and x2APIC enabled by the BIOS
the code which disables the x2APIC triggers an unchecked MSR access error:
RDMSR from 0x802 at rIP: 0xffffffff94079992 (native_apic_msr_read+0x12/0x50)
This is happens because default_acpi_madt_oem_check() selects an x2APIC
driver before the x2APIC is disabled.
When the x2APIC is disabled because interrupt remapping cannot be enabled
due to 'iommu=off' on the command line, x2apic_disable() invokes
apic_set_fixmap() which in turn tries to read the APIC ID. This triggers
the MSR warning because x2APIC is disabled, but the APIC driver is still
x2APIC based.
Prevent that by adding an argument to apic_set_fixmap() which makes the
APIC ID read out conditional and set it to false from the x2APIC disable
path. That's correct as the APIC ID has already been read out during early
discovery.
In __pci_register_driver(), the pci core overwrites the dev_groups field of
the embedded struct device_driver with the dev_groups from the outer
struct pci_driver unconditionally.
Set dev_groups in the pci_driver to make sure it is used.
This was broken since the introduction of pvpanic-pci.
Fixes: db3a4f0abefd ("misc/pvpanic: add PCI driver") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Fixes: ded13b9cfd59 ("PCI: Add support for dev_groups to struct pci_driver") Link: https://lore.kernel.org/r/20240411-pvpanic-pci-dev-groups-v1-1-db8cb69f1b09@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.
To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com> Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com Fixes: 8d655e6523764 ("hwmon: (ucd90320) Add minimum delay between bus accesses") Reviewed-by: Eddie James <eajames@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
net_alloc_generic is called by net_alloc, which is called without any
locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It
is read twice, first to allocate an array, then to set s.len, which is
later used to limit the bounds of the array access.
It is possible that the array is allocated and another thread is
registering a new pernet ops, increments max_gen_ptrs, which is then used
to set s.len with a larger than allocated length for the variable array.
Fix it by reading max_gen_ptrs only once in net_alloc_generic. If
max_gen_ptrs is later incremented, it will be caught in net_assign_generic.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Fixes: 073862ba5d24 ("netns: fix net_alloc_generic()") Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240502132006.3430840-1-cascardo@igalia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This was missed because of the function pointer indirection.
nvidia_smmu_context_fault() is also installed as a irq function, and the
'void *' was changed to a struct arm_smmu_domain. Since the iommu_domain
is embedded at a non-zero offset this causes nvidia_smmu_context_fault()
to miscompute the offset. Fixup the types.
There are two issues with SDHC2 configuration for SA8155P-ADP,
which prevent use of SDHC2 and causes issues with ethernet:
- Card Detect pin for SHDC2 on SA8155P-ADP is connected to gpio4 of
PMM8155AU_1, not to SoC itself. SoC's gpio4 is used for DWMAC
TX. If sdhc driver probes after dwmac driver, it reconfigures
gpio4 and this breaks Ethernet MAC.
- pinctrl configuration mentions gpio96 as CD pin. It seems it was
copied from some SM8150 example, because as mentioned above,
correct CD pin is gpio4 on PMM8155AU_1.
This patch fixes both mentioned issues by providing correct pin handle
and pinctrl configuration.
[Why] DSC debugfs, such as dp_dsc_clock_en_read,
use aconnector->dc_link to find pipe_ctx for display.
Displays connected to MST hub share the same dc_link.
DSC instance is from pipe_ctx. This causes incorrect
DSC instance for display connected to MST hub.
[How] Add aconnector->sink check to find pipe_ctx.
Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to
backlight BDB data. Commit 700034566d68 ("drm/i915/bios: Define more BDB
contents") updated the backlight BDB data accordingly. This broke the
parsing of backlight BDB data in VBT for versions 236 - 238 (both
inclusive) and hence the backlight controls are not responding on units
with the concerned BDB version.
backlight_control information has been present in backlight BDB data
from at least BDB version 191 onwards, if not before. Hence this patch
extracts the backlight_control information for BDB version 191 or newer.
Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236).
Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251).
v2: removed checking the block size of the backlight BDB data
[vsyrjala: this is completely safe thanks to commit e163cfb4c96d
("drm/i915/bios: Make copies of VBT data blocks")]
Fixes: 700034566d68 ("drm/i915/bios: Define more BDB contents") Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit c286f6a973c66c0d993ecab9f7162c790e7064c8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We missed setting the CCS mode during resume and engine resets.
Create a workaround to be added in the engine's workaround list.
This workaround sets the XEHP_CCS_MODE value at every reset.
The issue can be reproduced by running:
$ clpeak --kernel-latency
Without resetting the CCS mode, we encounter a fence timeout:
Fence expiration time out i915-0000:03:00.0:clpeak[2387]:2!
Fixes: 6db31251bb26 ("drm/i915/gt: Enable only one CCS for compute workload") Reported-by: Gnattu OC <gnattuoc@me.com> Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/10895 Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: <stable@vger.kernel.org> # v6.2+ Tested-by: Gnattu OC <gnattuoc@me.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by: Krzysztof Gibala <krzysztof.gibala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240426000723.229296-1-andi.shyti@linux.intel.com
(cherry picked from commit 4cfca03f76413db115c3cc18f4370debb1b81b2b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel hardware is capable of programming the Maud/Naud SDPs on its
own based on real-time clocks. While doing so, it takes care
of any deviations from the theoretical values. Programming the registers
explicitly with static values can interfere with this logic. Therefore,
let the HW decide the Maud and Naud SDPs on it's own.
Cc: stable@vger.kernel.org # v5.17 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8097 Co-developed-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430091825.733499-1-chaitanya.kumar.borah@intel.com
(cherry picked from commit 8e056b50d92ae7f4d6895d1c97a69a2a953cf97b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently we allocate all 3 levels of radix3 page tables using
nvkm_gsp_mem_ctor(), which uses dma_alloc_coherent() for allocating all of
the relevant memory. This can end up failing in scenarios where the system
has very high memory fragmentation, and we can't find enough contiguous
memory to allocate level 2 of the page table.
Currently, this can result in runtime PM issues on systems where memory
fragmentation is high - as we'll fail to allocate the page table for our
suspend/resume buffer:
Luckily, we don't actually need to allocate coherent memory for the page
table thanks to being able to pass the GPU a radix3 page table for
suspend/resume data. So, let's rewrite nvkm_gsp_radix3_sg() to use the sg
allocator for level 2. We continue using coherent allocations for lvl0 and
1, since they only take a single page.
V2:
* Don't forget to actually jump to the next scatterlist when we reach the
end of the scatterlist we're currently on when writing out the page table
for level 2
[Why]
Idle optimizations are blocked if there's more than one eDP connector
on the board - blocking S0i3 and IPS2 for static screen.
[How]
Fix the checks to correctly detect number of active eDP.
Also restrict the eDP support to panels that have correct feature
support.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correctly set the length of the drm_event to the size of the structure
that's actually used.
The length of the drm_event was set to the parent structure instead of
to the drm_vmw_event_fence which is supposed to be read. drm_read
uses the length parameter to copy the event to the user space thus
resuling in oob reads.
Legacy DU was broken by the referenced fixes commit because the placement
and the busy_placement no longer pointed to the same object. This was later
fixed indirectly by commit a78a8da51b36c7a0c0c16233f91d60aac03a5a49
("drm/ttm: replace busy placement with flags v6") in v6.9.
We don't get the right offset in that case. The GPU has
an unused 4K area of the register BAR space into which you can
remap registers. We remap the HDP flush registers into this
space to allow userspace (CPU or GPU) to flush the HDP when it
updates VRAM. However, on systems with >4K pages, we end up
exposing PAGE_SIZE of MMIO space.
Fixes: d8e408a82704 ("drm/amdkfd: Expose HDP registers to user space") Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We hit this when trying to initialize firmware of type
NVKM_FIRMWARE_IMG_DMA because we allocate our memory with
dma_alloc_coherent, and DMA allocations can't be turned back into memory
pages - which a scatterlist needs in order to map them.
So, fix this by allocating the memory with vmalloc instead().
V2:
* Fixup explanation as the prior one was bogus
When the Allwinner A64's TCON0 searches the ideal rate for the connected
panel, it may happen that it requests a rate from its parent PLL-MIPI
which PLL-MIPI does not support.
This happens for example on the Olimex TERES-I laptop where TCON0
requests PLL-MIPI to change to a rate of several GHz which causes the
panel to stay blank. It also happens on the pinephone where a rate of
less than 500 MHz is requested which causes instabilities on some
phones.
Set the minimum and maximum rate of Allwinner A64's PLL-MIPI according
to the Allwinner User Manual.
Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux") Reported-by: Diego Roversi <diegor@tiscali.it> Closes: https://groups.google.com/g/linux-sunxi/c/Rh-Uqqa66bw Tested-by: Diego Roversi <diegor@tiscali.it> Cc: stable@vger.kernel.org Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-2-46fc80c83637@oltmanns.dev Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Allwinner SoC's typically have an upper and lower limit for their
clocks' rates. Up until now, support for that has been implemented
separately for each clock type.
Implement that functionality in the sunxi-ng's common part making use of
the CCF rate liming capabilities, so that it is available for all clock
types.
Suggested-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Frank Oltmanns <frank@oltmanns.dev> Cc: stable@vger.kernel.org Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-1-46fc80c83637@oltmanns.dev Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
device_get_match_data() function should not be used on the device other
than the one matched to the given driver, because it always returns the
match_data of the matched driver. In case of exynos-clkout driver, the
original code matches the OF IDs on the PARENT device, so replacing it
with of_device_get_match_data() broke the driver.
This has been already pointed once in commit 2bc5febd05ab ("clk: samsung:
Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()"").
To avoid further confusion, add a comment about this special case, which
requires direct of_match_device() call to pass custom IDs array.
When using davinci-mcasp as CPU DAI with simple-card, there are some
conditions that cause simple-card to finish registering a sound card before
davinci-mcasp finishes registering all sound components. This creates a
non-working sound card from userspace with no problem indication apart
from not being able to play/record audio on a PCM stream. The issue
arises during simultaneous probe execution of both drivers. Specifically,
the simple-card driver, awaiting a CPU DAI, proceeds as soon as
davinci-mcasp registers its DAI. However, this process can lead to the
client mutex lock (client_mutex in soc-core.c) being held or davinci-mcasp
being preempted before PCM DMA registration on davinci-mcasp finishes.
This situation occurs when the probes of both drivers run concurrently.
Below is the code path for this condition. To solve the issue, defer
davinci-mcasp CPU DAI registration to the last step in the audio part of
it. This way, simple-card CPU DAI parsing will be deferred until all
audio components are registered.
Fail Code Path:
simple-card.c: probe starts
simple-card.c: simple_dai_link_of: simple_parse_node(..,cpu,..) returns EPROBE_DEFER, no CPU DAI yet
davinci-mcasp.c: probe starts
davinci-mcasp.c: devm_snd_soc_register_component() register CPU DAI
simple-card.c: probes again, finish CPU DAI parsing and call devm_snd_soc_register_card()
simple-card.c: finish probe
davinci-mcasp.c: *dma_pcm_platform_register() register PCM DMA
davinci-mcasp.c: probe finish
Cc: stable@vger.kernel.org Fixes: 9fbd58cf4ab0 ("ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controller") Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Reviewed-by: Jai Luthra <j-luthra@ti.com> Link: https://lore.kernel.org/r/20240417184138.1104774-1-jpaulo.silvagoncalves@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DSPK configuration is wrong for 16-bit playback and this happens because
the client config is always fixed at 24-bit in hw_params(). Fix this by
updating the client config to 16-bit for the respective playback.
Fixes: 327ef6470266 ("ASoC: tegra: Add Tegra186 based DSPK driver") Cc: stable@vger.kernel.org Signed-off-by: Sameer Pujar <spujar@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://msgid.link/r/20240405104306.551036-1-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UMAC_CMD register is written from different execution
contexts and has insufficient synchronization protections to
prevent possible corruption. Of particular concern are the
acceses from the phy_device delayed work context used by the
adjust_link call and the BH context that may be used by the
ndo_set_rx_mode call.
A spinlock is added to the driver to protect contended register
accesses (i.e. reg_lock) and it is used to synchronize accesses
to UMAC_CMD.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Cc: stable@vger.kernel.org Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ndo_set_rx_mode function is synchronized with the
netif_addr_lock spinlock and BHs disabled. Since this
function is also invoked directly from the driver the
same synchronization should be applied.
Fixes: 72f96347628e ("net: bcmgenet: set Rx mode before starting netif") Cc: stable@vger.kernel.org Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EXT_RGMII_OOB_CTRL register can be written from different
contexts. It is predominantly written from the adjust_link
handler which is synchronized by the phydev->lock, but can
also be written from a different context when configuring the
mii in bcmgenet_mii_config().
The chances of contention are quite low, but it is conceivable
that adjust_link could occur during resume when WoL is enabled
so use the phydev->lock synchronizer in bcmgenet_mii_config()
to be sure.
Fixes: afe3f907d20f ("net: bcmgenet: power on MII block for all MII modes") Cc: stable@vger.kernel.org Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xtensa has two-argument MAKE_PC_FROM_RA macro to convert a0 to an actual
return address because when windowed ABI is used call{,x}{4,8,12}
opcodes stuff encoded window size into the top 2 bits of the register
that becomes a return address in the called function. Second argument of
that macro is supposed to be an address having these 2 topmost bits set
correctly, but the comment suggested that that could be the stack
address. However the stack doesn't have to be in the same 1GByte region
as the code, especially in noMMU XIP configurations.
Fix the comment and use either _text or regs->pc as the second argument
for the MAKE_PC_FROM_RA macro.
Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sam Page (sam4k) working with Trend Micro Zero Day Initiative reported
a UAF in the tipc_buf_append() error path:
BUG: KASAN: slab-use-after-free in kfree_skb_list_reason+0x47e/0x4c0
linux/net/core/skbuff.c:1183
Read of size 8 at addr ffff88804d2a7c80 by task poc/8034
In the critical scenario, either the relevant skb is freed or its
ownership is transferred into a frag_lists. In both cases, the cleanup
code must not free it again: we need to clear the skb reference earlier.
Fixes: 1149557d64c9 ("tipc: eliminate unnecessary linearization of incoming buffers") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-23852 Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/752f1ccf762223d109845365d07f55414058e5a3.1714484273.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a partial revert of commit 6dbdd4de0362 ("e1000e: Workaround
for sporadic MDI error on Meteor Lake systems"). The referenced commit
used usleep_range inside the PHY access routines, which are sometimes
called from an atomic context. This can lead to a kernel panic in some
scenarios, such as cable disconnection and reconnection on vPro systems.
Solve this by changing the usleep_range calls back to udelay.
Fixes: 6dbdd4de0362 ("e1000e: Workaround for sporadic MDI error on Meteor Lake systems") Cc: stable@vger.kernel.org Reported-by: Jérôme Carretero <cJ@zougloub.eu> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218740 Closes: https://lore.kernel.org/lkml/a7eb665c74b5efb5140e6979759ed243072cb24a.camel@zougloub.eu/ Co-developed-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Tested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240429171040.1152516-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some designs the chip is not properly reset when powered up at boot or
after a suspend/resume cycle.
Use the sw-reset feature to ensure that the chip is in a clean state
after probe() / resume() and in the case of resume() restore the settings
(scale, trigger-enabled).
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218578 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240326113700.56725-3-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are 2 issues with interrupt handling in the mxc4005 driver:
1. mxc4005_set_trigger_state() writes MXC4005_REG_INT_MASK1_BIT_DRDYE
(0x01) to INT_MASK1 to enable the interrupt, but to disable the interrupt
it writes ~MXC4005_REG_INT_MASK1_BIT_DRDYE which is 0xfe, so it enables
all other interrupt sources in the INT_SRC1 register. On the MXC4005 this
is not an issue because only bit 0 of the register is used. On the MXC6655
OTOH this is a problem since bit7 is used as TC (Temperature Compensation)
disable bit and writing 1 to this disables Temperature Compensation which
should only be done when running self-tests on the chip.
Write 0 instead of ~MXC4005_REG_INT_MASK1_BIT_DRDYE to disable
the interrupts to fix this.
2. The datasheets for the MXC4005 / MXC6655 do not state what the reset
value for the INT_MASK0 and INT_MASK1 registers is and since these are
write only we also cannot learn this from the hw. Presumably the reset
value for both is all 0, which means all interrupts disabled.
Explicitly set both registers to 0 from mxc4005_chip_init() to ensure
both masks are actually set to 0.
Fixes: 79846e33aac1 ("iio: accel: mxc4005: add support for mxc6655") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240326113700.56725-2-hdegoede@redhat.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bosch does not use unique BMPxxx_CHIP_ID for the different versions
of the device which leads to misidentification of devices if their
ID is used. Use a new value in the chip_info structure instead of
the BMPxxx_CHIP_ID, in order to choose the correct regmap_bus to
be used.
The "maxim,green-led-current-microamp" property is only available for
the max30105 part (it provides an extra green LED), and must be set to
false for the max30102 part.
Instead, the max30100 part has been used for that, which is not
supported by this binding (it has its own binding).
This error was introduced during the txt to yaml conversion.
Fixes: 5a6a65b11e3a ("dt-bindings:iio:health:maxim,max30102: txt to yaml conversion") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20240316-max30102_binding_fix-v1-1-e8e58f69ef8a@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The crash is caused by calling arch_vcpu_is_preempted() for an offline
CPU. To avoid this, select the cpu with cpumask_any_and_distribute()
to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in
the pool, skip the assignment.
tj: This doesn't fully fix the bug as CPUs can still go down between picking
the target CPU and the wake call. Fixing that likely requires adding
cpu_online() test to either the sched or s390 arch code. However, regardless
of how that is fixed, workqueue shouldn't be picking a CPU which isn't
online as that would result in unpredictable and worse behavior.
When fallback to TCP happens early on a client socket, snd_nxt
is not yet initialized and any incoming ack will copy such value
into snd_una. If the mptcp worker (dumbly) tries mptcp-level
re-injection after such ack, that would unconditionally trigger a send
buffer cleanup using 'bad' snd_una values.
We could easily disable re-injection for fallback sockets, but such
dumb behavior already helped catching a few subtle issues and a very
low to zero impact in practice.
Instead address the issue always initializing snd_nxt (and write_seq,
for consistency) at connect time.
Fixes: 8fd738049ac3 ("mptcp: fallback in case of simultaneous connect") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/485 Tested-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240429-upstream-net-20240429-mptcp-snd_nxt-init-connect-v1-1-59ceac0a7dcb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the code calls mas_start() followed by mas_data_end() if the
maple state is MA_START, but mas_start() may return with the maple state
node == NULL. This will lead to a null pointer dereference when checking
information in the NULL node, which is done in mas_data_end().
Avoid setting the offset if there is no node by waiting until after the
maple state is checked for an empty or single entry state.
A user could trigger the events to cause a kernel oops by unmapping all
vmas to produce an empty maple tree, then mapping a vma that would cause
the scenario described above.
Link: https://lkml.kernel.org/r/20240422203349.2418465-1-Liam.Howlett@oracle.com Fixes: 54a611b60590 ("Maple Tree: add new data structure") Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com> Reported-by: Marius Fleischer <fleischermarius@gmail.com> Closes: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/ Link: https://lore.kernel.org/lkml/CAJg=8jyuSxDL6XvqEXY_66M20psRK2J53oBTP+fjV5xpW2-R6w@mail.gmail.com/ Tested-by: Marius Fleischer <fleischermarius@gmail.com> Tested-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We previously would call btrfs_check_leaf() if we had the check
integrity code enabled, which meant that we could only run the extended
leaf checks if we had WRITTEN set on the header flags.
This leaves a gap in our checking, because we could end up with
corruption on disk where WRITTEN isn't set on the leaf, and then the
extended leaf checks don't get run which we rely on to validate all of
the item pointers to make sure we don't access memory outside of the
extent buffer.
However, since 732fab95abe2 ("btrfs: check-integrity: remove
CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call
btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only
ever call it on blocks that are being written out, and thus have WRITTEN
set, or that are being read in, which should have WRITTEN set.
Add checks to make sure we have WRITTEN set appropriately, and then make
sure __btrfs_check_leaf() always does the item checking. This will
protect us from file systems that have been corrupted and no longer have
WRITTEN set on some of the blocks.
This was hit on a crafted image tweaking the WRITTEN bit and reported by
KASAN as out-of-bound access in the eb accessors. The example is a dir
item at the end of an eb.
Reported-by: lei lu <llfamsec@gmail.com> CC: stable@vger.kernel.org # 6.7+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com>
[ copy more details from report ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[BUG]
After kernel commit 86211eea8ae1 ("btrfs: qgroup: validate
btrfs_qgroup_inherit parameter"), user space tool snapper will fail to
create snapshot using its timeline feature.
[CAUSE]
It turns out that, if using timeline snapper would unconditionally pass
btrfs_qgroup_inherit parameter (assigning the new snapshot to qgroup 1/0)
for snapshot creation.
In that case, since qgroup is disabled there would be no qgroup 1/0, and
btrfs_qgroup_check_inherit() would return -ENOENT and fail the whole
snapshot creation.
[FIX]
Just skip the check if qgroup is not enabled.
This is to keep the older behavior for user space tools, as if the
kernel behavior changed for user space, it is a regression of kernel.
Thankfully snapper is also fixing the behavior by detecting if qgroup is
running in the first place, so the effect should not be that huge.
[BUG]
When running generic/287, the following file extent items can be
generated:
item 16 key (258 EXTENT_DATA 2682880) itemoff 15305 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 1378414592 nr 462848
extent data offset 0 nr 462848 ram 2097152
extent compression 0 (none)
Note that file extent item is not a compressed one, but its ram_bytes is
way larger than its disk_num_bytes.
According to btrfs on-disk scheme, ram_bytes should match disk_num_bytes
if it's not a compressed one.
[CAUSE]
Since commit b73a6fd1b1ef ("btrfs: split partial dio bios before
submit"), for partial dio writes, we would split the ordered extent.
However the function btrfs_split_ordered_extent() doesn't update the
ram_bytes even it has already shrunk the disk_num_bytes.
Originally the function btrfs_split_ordered_extent() is only introduced
for zoned devices in commit d22002fd37bd ("btrfs: zoned: split ordered
extent when bio is sent"), but later commit b73a6fd1b1ef ("btrfs: split
partial dio bios before submit") makes non-zoned btrfs affected.
Thankfully for un-compressed file extent, we do not really utilize the
ram_bytes member, thus it won't cause any real problem.
[FIX]
Also update btrfs_ordered_extent::ram_bytes inside
btrfs_split_ordered_extent().
Fixes: d22002fd37bd ("btrfs: zoned: split ordered extent when bio is sent") CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 284f17ac13fe ("mm/slub: handle bulk and single object freeing
separately") splits single and bulk object freeing in two functions
slab_free() and slab_free_bulk() which leads slab_free() to call
slab_free_hook() directly instead of slab_free_freelist_hook().
If `init_on_free` is set, slab_free_hook() zeroes the object.
Afterward, if `slub_debug=F` and `CONFIG_SLAB_FREELIST_HARDENED` are
set, the do_slab_free() slowpath executes freelist consistency
checks and try to decode a zeroed freepointer which leads to a
"Freepointer corrupt" detection in check_object().
During bulk free, slab_free_freelist_hook() isn't affected as it always
sets it objects freepointer using set_freepointer() to maintain its
reconstructed freelist after `init_on_free`.
For single free, object's freepointer thus needs to be avoided when
stored outside the object if `init_on_free` is set. The freepointer left
as is, check_object() may later detect an invalid pointer value due to
objects overflow.
To reproduce, set `slub_debug=FU init_on_free=1 log_level=7` on the
command line of a kernel build with `CONFIG_SLAB_FREELIST_HARDENED=y`.
1394 OHCI driver generates packet data for the response subaction to the
request subaction to some local registers. In the case, the driver should
assign timestamp to them by itself.
This commit fulfills the timestamp for the subaction.
Cc: stable@vger.kernel.org Fixes: dcadfd7f7c74 ("firewire: core: use union for callback of transaction completion") Link: https://lore.kernel.org/r/20240429084709.707473-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unfortunately both Lenovo Legion Pro 7 16ARX8H and Legion 7i 16IAX7
got the very same PCI SSID while the hardware implementations are
completely different (the former is with TI TAS2781 codec while the
latter is with Cirrus CS35L41 codec). The former model got broken by
the recent fix for the latter model.
For addressing the regression, check the codec SSID and apply the
proper quirk for each model now.
typec_register_partner() does not guarantee partner registration
to always succeed. In the event of failure, port->partner is set
to the error value or NULL. Given that port->partner validity is
not checked, this results in the following crash:
Unable to handle kernel NULL pointer dereference at virtual address xx
pc : run_state_machine+0x1bc8/0x1c08
lr : run_state_machine+0x1b90/0x1c08
..
Call trace:
run_state_machine+0x1bc8/0x1c08
tcpm_state_machine_work+0x94/0xe4
kthread_worker_fn+0x118/0x328
kthread+0x1d0/0x23c
ret_from_fork+0x10/0x20
To prevent the crash, check for port->partner validity before
derefencing it in all the call sites.
Cc: stable@vger.kernel.org Fixes: c97cd0b4b54e ("usb: typec: tcpm: set initial svdm version based on pd revision") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240427202812.3435268-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check and unregister existing source caps in tcpm_register_source_caps
function before registering new ones. This change fixes following
warning when port partner resends source caps after negotiating PD contract
for the purpose of re-negotiation.
[ 343.135030][ T151] sysfs: cannot create duplicate filename '/devices/virtual/usb_power_delivery/pd1/source-capabilities'
[ 343.135071][ T151] Call trace:
[ 343.135076][ T151] dump_backtrace+0xe8/0x108
[ 343.135099][ T151] show_stack+0x18/0x24
[ 343.135106][ T151] dump_stack_lvl+0x50/0x6c
[ 343.135119][ T151] dump_stack+0x18/0x24
[ 343.135126][ T151] sysfs_create_dir_ns+0xe0/0x140
[ 343.135137][ T151] kobject_add_internal+0x228/0x424
[ 343.135146][ T151] kobject_add+0x94/0x10c
[ 343.135152][ T151] device_add+0x1b0/0x4c0
[ 343.135187][ T151] device_register+0x20/0x34
[ 343.135195][ T151] usb_power_delivery_register_capabilities+0x90/0x20c
[ 343.135209][ T151] tcpm_pd_rx_handler+0x9f0/0x15b8
[ 343.135216][ T151] kthread_worker_fn+0x11c/0x260
[ 343.135227][ T151] kthread+0x114/0x1bc
[ 343.135235][ T151] ret_from_fork+0x10/0x20
[ 343.135265][ T151] kobject: kobject_add_internal failed for source-capabilities with -EEXIST, don't try to register things with the same name in the same directory.
Fixes: 8203d26905ee ("usb: typec: tcpm: Register USB Power Delivery Capabilities") Cc: linux-usb@vger.kernel.org Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Amit Sunil Dhamne <amitsd@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240424223227.1807844-1-amitsd@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a Fast Role Swap control message attempt results in a transition
to ERROR_RECOVERY, the TCPC can still queue a TCPM_SOURCING_VBUS event.
If the event is queued but processed after the tcpm_reset_port() call
in the PORT_RESET state, then the following occurs:
1. tcpm_reset_port() calls tcpm_init_vbus() to reset the vbus sourcing and
sinking state
2. tcpm_pd_event_handler() turns VBUS on before the port is in the default
state.
3. The port resolves as a sink. In the SNK_DISCOVERY state,
tcpm_set_charge() cannot set vbus to charge.
Clear pd events within PORT_RESET to get rid of non-applicable events.
Fixes: b17dd57118fe ("staging: typec: tcpm: Improve role swap with non PD capable partners") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240423202715.3375827-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY should be cleared
during initialization. Suspend during initialization can result in
undefined behavior due to clock synchronization failure, which often
seen as core soft reset timeout.
The programming guide recommended these bits to be cleared during
initialization for DWC_usb3.0 version 1.94 and above (along with
DWC_usb31 and DWC_usb32). The current check in the driver does not
account if it's set by default setting from coreConsultant.
This is especially the case for DRD when switching mode to ensure the
phy clocks are available to change mode. Depending on the
platforms/design, some may be affected more than others. This is noted
in the DWC_usb3x programming guide under the above registers.
Let's just disable them during driver load and mode switching. Restore
them when the controller initialization completes.
Note that some platforms workaround this issue by disabling phy suspend
through "snps,dis_u3_susphy_quirk" and "snps,dis_u2_susphy_quirk" when
they should not need to.
The xhci_plat.h should not need to include the entire xhci.h header.
This can cause redefinition in dwc3 if it selectively includes some xHCI
definitions. This is a prerequisite change for a fix to disable suspend
during initialization for dwc3.
If the USB driver passes a pointer into the TRB buffer for creq, this
buffer can be overwritten with the status response as soon as the event
is queued. This can make the final check return USB_GADGET_DELAYED_STATUS
when it shouldn't. Instead use the stored wLength.
FFS based applications can utilize the aio_cancel() callback to dequeue
pending USB requests submitted to the UDC. There is a scenario where the
FFS application issues an AIO cancel call, while the UDC is handling a
soft disconnect. For a DWC3 based implementation, the callstack looks
like the following:
There is currently no locking implemented between the AIO completion
handler and AIO cancel, so the issue occurs if the completion routine is
running in parallel to an AIO cancel call coming from the FFS application.
As the completion call frees the USB request (io_data->req) the FFS
application is also referencing it for the usb_ep_dequeue() call. This can
lead to accessing a stale/hanging pointer.
commit b566d38857fc ("usb: gadget: f_fs: use io_data->status consistently")
relocated the usb_ep_free_request() into ffs_epfile_async_io_complete().
However, in order to properly implement locking to mitigate this issue, the
spinlock can't be added to ffs_epfile_async_io_complete(), as
usb_ep_dequeue() (if successfully dequeuing a USB request) will call the
function driver's completion handler in the same context. Hence, leading
into a deadlock.
Fix this issue by moving the usb_ep_free_request() back to
ffs_user_copy_worker(), and ensuring that it explicitly sets io_data->req
to NULL after freeing it within the ffs->eps_lock. This resolves the race
condition above, as the ffs_aio_cancel() routine will not continue
attempting to dequeue a request that has already been freed, or the
ffs_user_copy_work() not freeing the USB request until the AIO cancel is
done referencing it.
This fix depends on
commit b566d38857fc ("usb: gadget: f_fs: use io_data->status
consistently")
This commit fixes uvc gadget support on 32-bit platforms.
Commit 0df28607c5cb ("usb: gadget: uvc: Generalise helper functions for
reuse") introduced a helper function __uvcg_iter_item_entries() to aid
with parsing lists of items on configfs attributes stores. This function
is a generalization of another very similar function, which used a
stack-allocated temporary buffer of fixed size for each item in the list
and used the sizeof() operator to check for potential buffer overruns.
The new function was changed to allocate the now variably sized temp
buffer on heap, but wasn't properly updated to also check for max buffer
size using the computed size instead of sizeof() operator.
As a result, the maximum item size was 7 (plus null terminator) on
64-bit platforms, and 3 on 32-bit ones. While 7 is accidentally just
barely enough, 3 is definitely too small for some of UVC configfs
attributes. For example, dwFrameInteval, specified in 100ns units,
usually has 6-digit item values, e.g. 166666 for 60fps.
The OS descriptors logic had the high/low byte of w_value inverted, causing
the extended properties to not be accessible for interface != 0.
>From the Microsoft documentation:
https://learn.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-os-1-0-descriptors-specification
OS_Desc_CompatID.doc (w_index = 0x4):
- wValue:
High Byte = InterfaceNumber. InterfaceNumber is set to the number of the
interface or function that is associated with the descriptor, typically
0x00. Because a device can have only one extended compat ID descriptor,
it should ignore InterfaceNumber, regardless of the value, and simply
return the descriptor.
Low Byte = 0. PageNumber is used to retrieve descriptors that are larger
than 64 KB. The header section is 16 bytes, so PageNumber is set to 0 for
this request.
We currently do not support >64KB compat ID descriptors, so verify that the
low byte is 0.
OS_Desc_Ext_Prop.doc (w_index = 0x5):
- wValue:
High byte = InterfaceNumber. The high byte of wValue is set to the number
of the interface or function that is associated with the descriptor.
Low byte = PageNumber. The low byte of wValue is used to retrieve
descriptors that are larger than 64 KB. The header section is 10 bytes, so
PageNumber is set to 0 for this request.
We also don't support >64KB extended properties, so verify that the low byte
is 0 and use the high byte for the interface number.
Testing with KASAN and syzkaller revealed a bug in port.c:disable_store():
usb_hub_to_struct_hub() can return NULL if the hub that the port belongs to
is concurrently removed, but the function does not check for this
possibility before dereferencing the returned value.
It turns out that the first dereference is unnecessary, since hub->intfdev
is the parent of the port device, so it can be changed easily. Adding a
check for hub == NULL prevents further problems.
The same bug exists in the disable_show() routine, and it can be fixed the
same way.
Testing ohci functionality with qemu's pci-ohci emulation often results
in ohci interface stalls, resulting in hung task timeouts.
The problem is caused by lost interrupts between the emulation and the
Linux kernel code. Additional interrupts raised while the ohci interrupt
handler in Linux is running and before the handler clears the interrupt
status are not handled. The fix for a similar problem in ehci suggests
that the problem is likely caused by edge-triggered MSI interrupts. See
commit 0b60557230ad ("usb: ehci: Prevent missed ehci interrupts with
edge-triggered MSI") for details.
Ensure that the ohci interrupt code handles all pending interrupts before
returning to solve the problem.
A virtual SuperSpeed device in the FreeBSD BVCP package
(https://bhyve.npulse.net/) presents an invalid ep0 maxpacket size of 256.
It stopped working with Linux following a recent commit because now we
check these sizes more carefully than before.
Fix this regression by using the bMaxpacketSize0 value in the device
descriptor for SuperSpeed or faster devices, even if it is invalid. This
is a very simple-minded change; we might want to check more carefully for
values that actually make some sense (for instance, no smaller than 64).
Fix issues when initially checking for a connector change:
- Use the correct connector number not the entire CCI.
- Call ->read under the PPM lock.
- Remove a bogus READ_ONCE.
Fixes: 808a8b9e0b87 ("usb: typec: ucsi: Check for notifications after init") Cc: stable@kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240401210515.1902048-1-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The completion notification for the final SET_NOTIFICATION_ENABLE
command during initialization can include a connector change
notification. However, at the time this completion notification is
processed, the ucsi struct is not ready to handle this notification.
As a result the notification is ignored and the controller
never sends an interrupt again.
Re-check CCI for a pending connector state change after
initialization is complete. Adjust the corresponding debug
message accordingly.
Fixes: 71a1fa0df2a3 ("usb: typec: ucsi: Store the notification mask") Cc: stable@vger.kernel.org Signed-off-by: Christian A. Ehrhardt <lk@c--e.de> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Link: https://lore.kernel.org/r/20240320073927.1641788-3-lk@c--e.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephen Rostedt reports:
"I went to run my tests on my VMs and the tests hung on boot up.
Unfortunately, the most I ever got out was:
[ 93.607888] Testing event system initcall: OK
[ 93.667730] Running tests on all trace events:
[ 93.669757] Testing all events: OK
[ 95.631064] ------------[ cut here ]------------
Timed out after 60 seconds"
and further debugging points to a possible circular locking dependency
between the console_owner locking and the worker pool locking.
Reverting the commit allows Steve's VM to boot to completion again.
[ This may obviously result in the "[TTM] Buffer eviction failed"
messages again, which was the reason for that original revert. But at
this point this seems preferable to a non-booting system... ]
Reported-and-bisected-by: Steven Rostedt <rostedt@goodmis.org> Link: https://lore.kernel.org/all/20240502081641.457aa25f@gandalf.local.home/ Acked-by: Maxime Ripard <mripard@kernel.org> Cc: Alex Constantino <dreaming.about.electric.sheep@gmail.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Timo Lindfors <timo.lindfors@iki.fi> Cc: Dave Airlie <airlied@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ensure that packet_buffer_get respects the user_length provided. If
the length of the head packet exceeds the user_length, packet_buffer_get
will now return 0 to signify to the user that no data were read
and a larger buffer size is required. Helps prevent user space overflows.
This reverts drm/amdgpu: fix ftrace event amdgpu_bo_move always move
on same heap. The basic problem here is that after the move the old
location is simply not available any more.
Some fixes were suggested, but essentially we should call the move
notification before actually moving things because only this way we have
the correct order for DMA-buf and VM move notifications as well.
Also rework the statistic handling so that we don't update the eviction
counter before the move.
v2: add missing NULL check
Signed-off-by: Christian König <christian.koenig@amd.com> Fixes: 94aeb4117343 ("drm/amdgpu: fix ftrace event amdgpu_bo_move always move on same heap") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3171 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It incorrectly claimed a resource isn't CPU visible if it's located at
the very end of CPU visible VRAM.
Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3343 Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reported-and-Tested-by: Jeremy Day <jsday@noreason.ca> Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
New request from KMD/VBIOS in order to support new UMA carveout
model. This fixes a null dereference from accessing
Ctx->dc_bios->integrated_info while it was NULL.
DAL parses through the BIOS and extracts the necessary
integrated_info but was missing a case for the new BIOS
version 2.3.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Gabe Teeger <gabe.teeger@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If a line is requested with debounce, and that results in debouncing
in software, and the line is subsequently reconfigured to enable edge
detection then the allocation of the kfifo to contain edge events is
overlooked. This results in events being written to and read from an
uninitialised kfifo. Read events are returned to userspace.
Initialise the kfifo in the case where the software debounce is
already active.
The use-after-free issue occurs as follows: when the GPIO chip device file
is being closed by invoking gpio_chrdev_release(), watched_lines is freed
by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier
chain failed due to waiting write rwsem. Additionally, one of the GPIO
chip's lines is also in the release process and holds the notifier chain's
read rwsem. Consequently, a race condition leads to the use-after-free of
watched_lines.
[use]
st54spi_gpio_dev_release()
--> gpio_free()
--> gpiod_free()
--> gpiod_free_commit()
--> gpiod_line_state_notify()
--> blocking_notifier_call_chain()
--> down_read(&nh->rwsem); <-- held rwsem
--> notifier_call_chain()
--> lineinfo_changed_notify()
--> test_bit(xxxx, cdev->watched_lines) <-- use after free
The side effect of the use-after-free issue is that a GPIO line event is
being generated for userspace where it shouldn't. However, since the chrdev
is being closed, userspace won't have the chance to read that event anyway.
To fix the issue, call the bitmap_free() function after the unregistration
of lineinfo_changed_nb notifier chain.
Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info") Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com> Link: https://lore.kernel.org/r/20240505141156.2944912-1-quic_zhonhan@quicinc.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Limit the workaround introduced by commit 31729e8c21ec ("drm/amd/pm: fixes
a random hang in S4 for SMU v13.0.4/11") to only run in the s4 path.
Cc: Tim Huang <Tim.Huang@amd.com> Fixes: 31729e8c21ec ("drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11") Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3351 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When no mode is set, the utility pin appears to be grounded. No signal
is getting through.
This is problematic because ARC and eARC use this line and may do so even
if no display mode is set.
This change enable the bandgap setting on g12 chip, which fix the problem
with the utility pin. This is done by restoring init values on PHY init and
disable.
The phy is not in a useful state right after init. It will become useful,
including for auxiliary function such as CEC or ARC, after the first mode
is set. This is a problem on systems where the display is using another
interface like DSI or CVBS.
This change refactor the init and mode change callback to power up the PHY
on init and leave only what is necessary for mode changes in the related
function. This is enough to fix CEC operation when HDMI display is not
enabled.
The problem stems from the use of mv88e6185_phylink_get_caps() to get
the device capabilities.
Since there are serdes only ports 0/1 included, create a new dedicated
phylink_get_caps for the 6320 and 6321 to properly support their
set of capabilities.
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Steffen Bätz <steffen@innosonix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20240508072944.54880-2-steffen@innosonix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.
This patch fixes this by registering the devlink after
hardware initialization.
Fixes: cd6242991d2e ("net: hns3: add support for registering devlink for VF") Fixes: 93305b77ffcb ("net: hns3: fix kernel crash when devlink reload during pf initialization") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state, and the port VLAN filter
remains enabled.
To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".
Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control") Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point, the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.
Fixes: eaf83ae59e18 ("net: hns3: add querying fec ability from firmware") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.
Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.
Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:
To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration
Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable
resolved by ip_route_output_flow() are not released or put before return.
It may cause the refcount leak, so fix it.
According to syzbot, there is a chance that ip6_dst_idev()
returns NULL in ip6_output(). Most places in IPv6 stack
deal with a NULL idev just fine, but not here.
disable_ipv6 is read locklessly, add appropriate READ_ONCE()
and WRITE_ONCE() annotations.
v2: do not preload net before rtnl_trylock() in
addrconf_disable_ipv6() (Jiri)
Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 4db783d68b9b ("ipv6: prevent NULL dereference in ip6_output()") Signed-off-by: Sasha Levin <sashal@kernel.org>
Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.
This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.
This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.
The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
operstate_show() can omit dev_base_lock acquisition only
to read dev->operstate.
Annotate accesses to dev->operstate.
Writers still acquire dev_base_lock for mutual exclusion.
Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 4893b8b3ef8d ("hsr: Simplify code for announcing HSR nodes timer setup") Signed-off-by: Sasha Levin <sashal@kernel.org>
Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.
This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.
Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.
Only generate one ACK packet for all the subpackets in a jumbo packet. If
we would like to generate more than one ACK, we prioritise them base on
their reason code, in the order, highest first:
Make the following fixes to the congestion control algorithm:
(1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since
that's currently held constant - set to the size of a jumbo subpacket
payload so that we can create jumbo packets on the fly. The current
code invariably picks 3 as the starting value.
Further, the starting cwnd needs to be an even number because we ack
every other packet, so set it to 4.
(2) Don't cut ssthresh when we see an ACK come from the peer with a
receive window (rwind) less than ssthresh. ssthresh keeps track of
characteristics of the connection whereas rwind may be reduced by the
peer for any reason - and may be reduced to 0.
Fixes: 1fc4fa2ac93d ("rxrpc: Fix congestion management") Fixes: 0851115090a3 ("rxrpc: Reduce ssthresh to peer's receive window") Signed-off-by: David Howells <dhowells@redhat.com> Suggested-by: Simon Wilkinson <sxw@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Reviewed-by: Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>> Link: https://lore.kernel.org/r/20240503150749.1001323-2-dhowells@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
