When configured for default synchronisation (Rx syncs to Tx) and the
SAI operates in consumer mode (clocks provided externally to Tx), a
synchronisation error occurs on Tx on the first attempt after device
initialisation when the playback stream is started while a capture
stream is already active. This results in channel shift/swap on the
playback stream.
Subsequent streams (ie after that first failing one) always work
correctly, no matter the order, with or without the other stream active.
This issue was observed (and fix tested) on an i.MX6UL board connected
to an ADAU1761 codec, where the codec provides both frame and bit clock
(connected to TX pins).
To fix this, always initialize the 'other' xCR4 and xCR5 registers when
we're starting a stream which is synced to the opposite one, irregardless
of the producer/consumer status.
Fixes: 51659ca069ce ("ASoC: fsl-sai: set xCR4/xCR5/xMR for SAI master mode") Signed-off-by: Maarten Zanders <maarten@zanders.be> Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://patch.msgid.link/20251024135716.584265-1-maarten@zanders.be Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The dpll.yaml spec incorrectly omitted module-name and clock-id from the
pin-get operation reply specification, even though the kernel DPLL
implementation has always included these attributes in pin-get responses
since the initial implementation.
This spec inconsistency caused issues with the C YNL code generator.
The generated dpll_pin_get_rsp structure was missing these fields.
Fix the spec by adding module-name and clock-id to the pin-attrs reply
specification to match the actual kernel behavior.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Ivan Vecera <ivecera@redhat.com> Link: https://patch.msgid.link/20251024185512.363376-1-poros@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In efx_mae_enumerate_mports(), memory allocated for mae_mport_desc is
passed as a argument to efx_mae_process_mport(), but when the error path
in efx_mae_process_mport() gets executed, the memory allocated for desc
gets leaked.
Fix that by freeing the memory allocation before returning error.
Fixes: a6a15aca4207 ("sfc: enumerate mports in ef100") Acked-by: Edward Cree <ecree.xilinx@gmail.com> Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in> Link: https://patch.msgid.link/20251023141844.25847-1-nihaal@cse.iitm.ac.in Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ynl_attr_put_str() function was not including the null terminator
in the attribute length calculation. This caused kernel to reject
CTRL_CMD_GETFAMILY requests with EINVAL:
"Attribute failed policy validation".
For a 4-character family name like "dpll":
- Sent: nla_len=8 (4 byte header + 4 byte string without null)
- Expected: nla_len=9 (4 byte header + 5 byte string with null)
The bug was introduced in commit 15d2540e0d62 ("tools: ynl: check for
overflow of constructed messages") when refactoring from stpcpy() to
strlen(). The original code correctly included the null terminator:
Since stpcpy() returns a pointer past the null terminator, the length
included it. The refactored version using strlen() omitted the +1.
The fix also removes NLA_ALIGN() from nla_len calculation, since
nla_len should contain actual attribute length, not aligned length.
Alignment is only for calculating next attribute position. This makes
the code consistent with ynl_attr_put().
CTRL_ATTR_FAMILY_NAME uses NLA_NUL_STRING policy which requires
null terminator. Kernel validates with memchr() and rejects if not
found.
The current logic uses the flush sequence from the current address
space. This is harmless when deducing the flush requirements for the
current submit, as either the incoming address space is the same one
as the currently active one or we switch context, in which case the
flush is unconditional.
However, this sequence is also stored as the current flush sequence
of the GPU. If we switch context the stored flush sequence will no
longer belong to the currently active address space. This incoherency
can then cause missed flushes, resulting in translation errors.
Periodic advertising enabled flag cannot be tracked by the enabled
flag since advertising and periodic advertising each can be
enabled/disabled separately from one another causing the states to be
inconsistent when for example an advertising set is disabled its
enabled flag is set to false which is then used for periodic which has
not being disabled.
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This fixes the state tracking of advertisement set/instance 0x00 which
is considered a legacy instance and is not tracked individually by
adv_instances list, previously it was assumed that hci_dev itself would
track it via HCI_LE_ADV but that is a global state not specifc to
instance 0x00, so to fix it a new flag is introduced that only tracks the
state of instance 0x00.
Fixes: 1488af7b8b5f ("Bluetooth: hci_sync: Fix hci_resume_advertising_sync") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch adds logic to handle power management control when the
Bluetooth function is closed during the SDIO reset sequence.
Specifically, if BT is closed before reset, the driver enables the
SDIO function and sets driver pmctrl. After reset, if BT remains
closed, the driver sets firmware pmctrl and disables the SDIO function.
These changes ensure proper power management and device state consistency
across the reset flow.
Fixes: 8fafe702253d ("Bluetooth: mt7921s: support bluetooth reset mechanism") Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, hci_conn_hash_lookup_big only checks for BIS master connections,
by filtering out connections with the destination address set. This commit
updates this function to also consider BIS slave connections, since it is
also used for a Broadcast Receiver to set an available BIG handle before
issuing the LE BIG Create Sync command.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: f0c200a4a537 ("Bluetooth: ISO: Fix BIS connection dst_type handling") Signed-off-by: Sasha Levin <sashal@kernel.org>
hci_cmd_sync_dequeue_once() does lookup and then cancel
the entry under two separate lock sections. Meanwhile,
hci_cmd_sync_work() can also delete the same entry,
leading to double list_del() and "UAF".
Fix this by holding cmd_sync_work_lock across both
lookup and cancel, so that the entry cannot be removed
concurrently.
Fixes: 505ea2b29592 ("Bluetooth: hci_sync: Add helper functions to manipulate cmd_sync queue") Reported-by: Cen Zhang <zzzccc427@163.com> Signed-off-by: Cen Zhang <zzzccc427@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The root cause of this issue are:
1. When probing the usbnet device, executing usbnet_link_change(dev, 0, 0);
put the kevent work in global workqueue. However, the kevent has not yet
been scheduled when the usbnet device is unregistered. Therefore, executing
free_netdev() results in the "free active object (kevent)" error reported
here.
2. Another factor is that when calling usbnet_disconnect()->unregister_netdev(),
if the usbnet device is up, ndo_stop() is executed to cancel the kevent.
However, because the device is not up, ndo_stop() is not executed.
The solution to this problem is to cancel the kevent before executing
free_netdev().
Fixes: a69e617e533e ("usbnet: Fix linkwatch use-after-free on disconnect") Reported-by: Sam Sun <samsun1006219@gmail.com> Closes: https://syzkaller.appspot.com/bug?extid=8bfd7bcc98f7300afb84 Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Link: https://patch.msgid.link/20251022024007.1831898-1-lizhi.xu@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
retsnoop's build on powerpc (ppc64le) architecture ([0]) failed due to
wrong definition of PT_REGS_SP() macro. Looking at powerpc's
implementation of stack unwinding in perf_callchain_user_64() clearly
shows that stack pointer register is gpr[1].
Fix libbpf's definition of __PT_SP_REG for powerpc to fix all this.
avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio
stream while period-elapsed work services its IRQs. As the former
frees the DAI's private context, these two operations shall be
synchronized to avoid slab-use-after-free or worse errors.
Fixes: 0dbb186c3510 ("ASoC: Intel: avs: Update stream status in a separate thread") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://patch.msgid.link/20251023092348.3119313-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The pcm->prepare() function may be called multiple times in a row by the
userspace, as mentioned in the documentation. The driver shall take that
into account and prevent redundancy. However, the exact same function is
called during XRUNs and in such case, the particular stream shall be
reset and setup anew.
Fixes: 9114700b496c ("ASoC: Intel: avs: Generic PCM FE operations") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://patch.msgid.link/20251023092348.3119313-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The clock obtained via devm_clk_get_enabled() is automatically managed
by devres and will be disabled and freed on driver detach. Manually
calling clk_disable_unprepare() in error path and remove function
causes double free.
Remove the manual clock cleanup in both aspeed_acry_probe()'s error
path and aspeed_acry_remove().
The failure of this check only results in a security mitigation being
applied, slightly affecting performance of the compiled BPF program. It
doesn't result in a failed syscall, an thus auditing a failed LSM
permission check for it is unwanted. For example with SELinux, it causes
a denial to be reported for confined processes running as root, which
tends to be flagged as a problem to be fixed in the policy. Yet
dontauditing or allowing CAP_SYS_ADMIN to the domain may not be
desirable, as it would allow/silence also other checks - either going
against the principle of least privilege or making debugging potentially
harder.
Fix it by changing it from capable() to ns_capable_noaudit(), which
instructs the LSMs to not audit the resulting denials.
Refactor the code to avoid repeated usage of bpf_prog->aux->stack_depth
in do_jit() func. If the private stack is used, the stack_depth will be
0 for that prog. Refactoring make it easy to adjust stack_depth.
Private stack will be allocated with percpu allocator in jit time.
To avoid complexity at runtime, only one copy of private stack is
available per cpu per prog. So runtime recursion check is necessary
to avoid stack corruption.
Current private stack only supports kprobe/perf_event/tp/raw_tp
which has recursion check in the kernel, and prog types that use
bpf trampoline recursion check. For trampoline related prog types,
currently only tracing progs have recursion checking.
To avoid complexity, all async_cb subprogs use normal kernel stack
including those subprogs used by both main prog subtree and async_cb
subtree. Any prog having tail call also uses kernel stack.
To avoid jit penalty with private stack support, a subprog stack
size threshold is set such that only if the stack size is no less
than the threshold, private stack is supported. The current threshold
is 64 bytes. This avoids jit penality if the stack usage is small.
A useless 'continue' is also removed from a loop in func
check_max_stack_depth().
Fix a race where irq_work can be queued in bpf_ringbuf_commit()
but the ring buffer is freed before the work executes.
In the syzbot reproducer, a BPF program attached to sched_switch
triggers bpf_ringbuf_commit(), queuing an irq_work. If the ring buffer
is freed before this work executes, the irq_work thread may accesses
freed memory.
Calling `irq_work_sync(&rb->work)` ensures that all pending irq_work
complete before freeing the buffer.
Fixes: 457f44363a88 ("bpf: Implement BPF ring buffer and verifier support for it") Reported-by: syzbot+2617fc732430968b45d2@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=2617fc732430968b45d2 Tested-by: syzbot+2617fc732430968b45d2@syzkaller.appspotmail.com Signed-off-by: Noorain Eqbal <nooraineqbal@gmail.com> Link: https://lore.kernel.org/r/20251020180301.103366-1-nooraineqbal@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The previous implementation incorrectly assumed the original type of
'priv' was void**, leading to an unnecessary and misleading
cast. Correct the cast of the 'priv' pointer in test_dev_action() to
its actual type, long*, removing an unnecessary cast.
As an additional benefit, this fixes an out-of-bounds CHERI fault on
hardware with architectural capabilities. The original implementation
tried to store a capability-sized pointer using the priv
pointer. However, the priv pointer's capability only granted access to
the memory region of its original long type, leading to a bounds
violation since the size of a long is smaller than the size of a
capability. This change ensures that the pointer usage respects the
capabilities' bounds.
For keys added by ieee80211_gtk_rekey_add(), we assume that
they're already present in the hardware and set the flag
KEY_FLAG_UPLOADED_TO_HARDWARE. However, setting this flag
needs to be paired with decrementing the tailroom needed,
which was missed.
Fixes: f52a0b408ed1 ("wifi: mac80211: mark keys as uploaded when added by the driver") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20251019115358.c88eafb4083e.I69e9d4d78a756a133668c55b5570cf15a4b0e6a4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
During resume, the driver can call ieee80211_add_gtk_rekey for keys that
are not programmed into the device, e.g. keys of inactive links.
Don't mark such a key as uploaded to avoid removing it later from the
driver/device.
cs-amp-lib-test uses functions from kunit/test-bug.h but wasn't
including it.
This error was found by smatch.
Fixes: 177862317a98 ("ASoC: cs-amp-lib: Add KUnit test for calibration helpers") Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://patch.msgid.link/20251016094844.92796-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Current parser logic for GMU firmware assumes a dword aligned payload
size for every block. This is not true for all GMU firmwares. So, fix
this by using correct 'size' value in the calculation for the offset
for the next block's header.
Fixes: c6ed04f856a4 ("drm/msm/a6xx: A640/A650 GMU firmware path") Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/674040/
Message-ID: <20250911-assorted-sept-1-v2-2-a8bf1ee20792@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bitwise operations with WMI_KEY_PAIRWISE (defined as 0) are ineffective
and misleading. This results in pairwise key validations added in
commit 97acb0259cc9 ("wifi: ath11k: fix group data packet drops
during rekey") to always evaluate false and clear key commands for
pairwise keys are not honored.
Since firmware supports overwriting the new key without explicitly
clearing the previous one, there is no visible impact currently.
However, to restore consistency with the previous behavior and improve
clarity, replace bitwise operations with direct assignments and
comparisons for key flags.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-wireless/aLlaetkalDvWcB7b@stanley.mountain Fixes: 97acb0259cc9 ("wifi: ath11k: fix group data packet drops during rekey") Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20251003092158.1080637-1-rameshkumar.sundaram@oss.qualcomm.com
[update copyright per current guidance] Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current code does not have the MU EDCA feature, so it cannot support
the use of EDCA by STA in specific UL MU HE TB PPDU transmissions. Refer
to IEEE Std 802.11ax-2021 "9.4.2.251 MU EDCA Parameter Set element",
"26.2.7 EDCA operation using MU EDCA parameters".
Add ath11k_mac_op_conf_tx_mu_edca() to construct the MU EDCA parameters
received from mac80211 into WMI WMM parameters，and send to the firmware
according to the different WMM type flags.
ath12k just like ath11k [1] did not handle skb cleanup during idr
cleanup callback. Both ath12k_mac_vif_txmgmt_idr_remove() and
ath12k_mac_tx_mgmt_pending_free() performed idr cleanup and DMA
unmapping for skb but only ath12k_mac_tx_mgmt_pending_free() freed
skb. As a result, during vdev deletion a memory leak occurs.
Refactor all clean up steps into a new function. New function
ath12k_mac_tx_mgmt_free() creates a centralized area where idr
cleanup, DMA unmapping for skb and freeing skb is performed. Utilize
skb pointer given by idr_remove(), instead of passed as a function
argument because IDR will be protected by locking. This will prevent
concurrent modification of the same IDR.
Now ath12k_mac_tx_mgmt_pending_free() and
ath12k_mac_vif_txmgmt_idr_remove() call ath12k_mac_tx_mgmt_free().
ath10k_wmi_cmd_send takes ownership of the passed buffer (skb) and has the
responsibility to release it in case of error. This patch fixes missing
free in case of early error due to unhandled WMI command ID.
Fixes: 553215592f14 ("ath10k: warn if give WMI command is not supported") Suggested-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com> Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com> Link: https://patch.msgid.link/20250926195656.187970-1-loic.poulain@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Chao further identified [2] a reproducible scenario involving signal
delivery: a non-AMX task is preempted by an AMX-enabled task which
modifies the XFD MSR.
When the non-AMX task resumes and reloads XSTATE with init values,
a warning is triggered due to a mismatch between fpstate::xfd and the
CPU's current XFD state. fpu__clear_user_states() does not currently
re-synchronize the XFD state after such preemption.
Invoke xfd_update_state() which detects and corrects the mismatch if
there is a dynamic feature.
This also benefits the sigreturn path, as fpu__restore_sig() may call
fpu__clear_user_states() when the sigframe is inaccessible.
[ dhansen: minor changelog munging ]
Closes: https://lore.kernel.org/lkml/aDCo_SczQOUaB2rS@google.com [1] Fixes: 672365477ae8a ("x86/fpu: Update XFD state where required") Reported-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Chao Gao <chao.gao@intel.com> Tested-by: Chao Gao <chao.gao@intel.com> Link: https://lore.kernel.org/all/aDWbctO%2FRfTGiCg3@intel.com
Cc:stable@vger.kernel.org Link: https://patch.msgid.link/20250610001700.4097-1-chang.seok.bae%40intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When smb2_query_info_compound() retries, a previously allocated cfid may
have been freed in the first attempt.
Because cfid wasn't reset on replay, later cleanup could act on a stale
pointer, leading to a potential use-after-free.
Cc: stable@kernel.org Fixes: 4f1fffa237692 ("cifs: commands that are retried should have replay flag set") Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Acked-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit c1e18c17bda6 ("s390/pci: add zpci_set_irq()/zpci_clear_irq()"),
introduced the zpci_set_irq() and zpci_clear_irq(), to be used while
resetting a zPCI device.
Commit da995d538d3a ("s390/pci: implement reset_slot for hotplug
slot"), mentions zpci_clear_irq() being called in the path for
zpci_hot_reset_device(). But that is not the case anymore and these
functions are not called outside of this file. Instead
zpci_hot_reset_device() relies on zpci_disable_device() also clearing
the IRQs, but misses to reset the zdev->irqs_registered flag.
However after a CLP disable/enable reset, the device's IRQ are
unregistered, but the flag zdev->irq_registered does not get cleared. It
creates an inconsistent state and so arch_restore_msi_irqs() doesn't
correctly restore the device's IRQ. This becomes a problem when a PCI
driver tries to restore the state of the device through
pci_restore_state(). Restore IRQ unconditionally for the device and remove
the irq_registered flag as its redundant.
Since commit 72377ab2d671 ("mptcp: more conservative check for zero
probes") the MPTCP-level zero window probe check is always disabled, as
the TCP-level write queue always contains at least the newly allocated
skb.
Refine the relevant check tacking in account that the above condition
and that such skb can have zero length.
Fixes: 72377ab2d671 ("mptcp: more conservative check for zero probes") Cc: stable@vger.kernel.org Reported-by: Geliang Tang <geliang@kernel.org> Closes: https://lore.kernel.org/d0a814c364e744ca6b836ccd5b6e9146882e8d42.camel@kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-3-38ffff5a9ec8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Accessing the transmit queue without owning the msk socket lock is
inherently racy, hence __mptcp_check_push() could actually quit early
even when there is pending data.
That in turn could cause unexpected tx lock and timeout.
Dropping the early check avoids the race, implicitly relaying on later
tests under the relevant lock. With such change, all the other
mptcp_send_head() call sites are now under the msk socket lock and we
can additionally drop the now unneeded annotation on the transmit head
pointer accesses.
Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Geliang Tang <geliang@kernel.org> Tested-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251028-net-mptcp-send-timeout-v1-1-38ffff5a9ec8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The of_find_node_by_name() function returns a device tree node with its
reference count incremented. The caller is responsible for calling
of_node_put() to release this reference when done.
Commit e24cca19babe ("sh: Kill off MAX_DMA_ADDRESS leftovers.") removed
the define ONCHIP_NR_DMA_CHANNELS. So that the leftover reference needs
to be replaced by CONFIG_NR_ONCHIP_DMA_CHANNELS to compile successfully
with CONFIG_PVR2_DMA enabled.
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com> Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
The RFCOMM driver confuses the local and remote modem control signals,
which specifically means that the reported DTR and RTS state will
instead reflect the remote end (i.e. DSR and CTS).
This issue dates back to the original driver (and a follow-on update)
merged in 2002, which resulted in a non-standard implementation of
TIOCMSET that allowed controlling also the TS07.10 IC and DV signals by
mapping them to the RI and DCD input flags, while TIOCMGET failed to
return the actual state of DTR and RTS.
Note that the bogus control of input signals in tiocmset() is just
dead code as those flags will have been masked out by the tty layer
since 2003.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bit_putcs_aligned()/unaligned() derived the glyph pointer from the
character value masked by 0xff/0x1ff, which may exceed the actual font's
glyph count and read past the end of the built-in font array.
Clamp the index to the actual glyph count before computing the address.
This fixes a global out-of-bounds read reported by syzbot.
In virtio-net, we have not yet supported multi-buffer XDP packet in
zerocopy mode when there is a binding XDP program. However, in that
case, when receiving multi-buffer XDP packet, we skip the XDP program
and return XDP_PASS. As a result, the packet is passed to normal network
stack which is an incorrect behavior (e.g. a XDP program for packet
count is installed, multi-buffer XDP packet arrives and does go through
XDP program. As a result, the packet count does not increase but the
packet is still received from network stack).This commit instead returns
XDP_ABORTED in that case.
Fixes: 99c861b44eb1 ("virtio_net: xsk: rx: support recv merge mode") Cc: stable@vger.kernel.org Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com> Link: https://patch.msgid.link/20251022155630.49272-1-minhquangbui99@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The switch_brightness_work delayed work accesses device->brightness
and device->backlight, freed by acpi_video_dev_unregister_backlight()
during device removal.
If the work executes after acpi_video_bus_unregister_backlight()
frees these resources, it causes a use-after-free when
acpi_video_switch_brightness() dereferences device->brightness or
device->backlight.
Fix this by calling cancel_delayed_work_sync() for each device's
switch_brightness_work in acpi_video_bus_remove_notify_handler()
after removing the notify handler that queues the work. This ensures
the work completes before the memory is freed.
Fixes: 8ab58e8e7e097 ("ACPI / video: Fix backlight taking 2 steps on a brightness up/down keypress") Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Yuhao Jiang <danisjiang@gmail.com> Reviewed-by: Hans de Goede <hansg@kernel.org>
[ rjw: Changelog edit ] Link: https://patch.msgid.link/20251022200704.2655507-1-danisjiang@gmail.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Actually check the return value from pll_ops->init_pll()
as it can return an error.
If the card's BIOS didn't run because it's not the primary VGA card
the fact that the xclk source is unsupported is printed as shown
below but the driver continues on regardless and on my machine causes
a hard lock up.
Recently, we discovered the following issue through syzkaller:
BUG: KASAN: slab-use-after-free in fb_mode_is_equal+0x285/0x2f0
Read of size 4 at addr ff11000001b3c69c by task syz.xxx
...
Call Trace:
<TASK>
dump_stack_lvl+0xab/0xe0
print_address_description.constprop.0+0x2c/0x390
print_report+0xb9/0x280
kasan_report+0xb8/0xf0
fb_mode_is_equal+0x285/0x2f0
fbcon_mode_deleted+0x129/0x180
fb_set_var+0xe7f/0x11d0
do_fb_ioctl+0x6a0/0x750
fb_ioctl+0xe0/0x140
__x64_sys_ioctl+0x193/0x210
do_syscall_64+0x5f/0x9c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Based on experimentation and analysis, during framebuffer unregistration,
only the memory of fb_info->modelist is freed, without setting the
corresponding fb_display[i]->mode to NULL for the freed modes. This leads
to UAF issues during subsequent accesses. Here's an example of reproduction
steps:
1. With /dev/fb0 already registered in the system, load a kernel module
to register a new device /dev/fb1;
2. Set fb1's mode to the global fb_display[] array (via FBIOPUT_CON2FBMAP);
3. Switch console from fb to VGA (to allow normal rmmod of the ko);
4. Unload the kernel module, at this point fb1's modelist is freed, leaving
a wild pointer in fb_display[];
5. Trigger the bug via system calls through fb0 attempting to delete a mode
from fb0.
Add a check in do_unregister_framebuffer(): if the mode to be freed exists
in fb_display[], set the corresponding mode pointer to NULL.
Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When tracing is enabled, the trace_nfsd_read_done trace point
crashes during the pynfs read.testNoFh test.
Fixes: 15a8b55dbb1b ("nfsd: call op_release, even when op_func returns an error") Cc: stable@vger.kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The parentheses for the unlikely() annotation were put in the wrong
place so it means that the condition is basically never true and the
bounds checking is skipped.
Since cited commit, ef100_probe_main() and hence also
ef100_check_design_params() run before efx->net_dev is created;
consequently, we cannot netif_set_tso_max_size() or _segs() at this
point.
Move those netif calls to ef100_probe_netdev(), and also replace
netif_err within the design params code with pci_err.
Reported-by: Kyungwook Boo <bookyungwook@gmail.com> Fixes: 98ff4c7c8ac7 ("sfc: Separate netdev probe/remove from PCI probe/remove") Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250401225439.2401047-1-edward.cree@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Amelia Crate <acrate@waldn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ath12k_mac_assign_vif_to_vdev(), if arvif is created on a different
radio, it gets deleted from that radio through a call to
ath12k_mac_unassign_link_vif(). This action frees the arvif pointer.
Subsequently, there is a check involving arvif, which will result in a
read-after-free scenario.
Fix this by moving this check after arvif is again assigned via call to
ath12k_mac_assign_link_vif().
There is a WARN_ON_ONCE to catch an unlikely situation when
domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless
happens we must avoid using a NULL pointer.
The direction of the IDIO-16 GPIO lines is fixed with the first 16 lines
as output and the remaining 16 lines as input. Set the gpio_config
fixed_direction_output member to represent the fixed direction of the
GPIO lines.
Fixes: db02247827ef ("gpio: idio-16: Migrate to the regmap API") Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com> Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com Suggested-by: Michael Walle <mwalle@kernel.org> Cc: stable@vger.kernel.org # ae495810cffe: gpio: regmap: add the .fixed_direction_output configuration parameter Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <wbg@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-3-ebeb50e93c33@kernel.org Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: William Breathitt Gray <wbg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are GPIO controllers such as the one present in the LX2160ARDB
QIXIS FPGA which have fixed-direction input and output GPIO lines mixed
together in a single register. This cannot be modeled using the
gpio-regmap as-is since there is no way to present the true direction of
a GPIO line.
In order to make this use case possible, add a new configuration
parameter - fixed_direction_output - into the gpio_regmap_config
structure. This will enable user drivers to provide a bitmap that
represents the fixed direction of the GPIO lines.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Reviewed-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Stable-dep-of: 2ba5772e530f ("gpio: idio-16: Define fixed direction of the GPIO lines") Signed-off-by: William Breathitt Gray <wbg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add GENMASK_TYPE() which generalizes __GENMASK() to support different
types, and implement fixed-types versions of GENMASK() based on it.
The fixed-type version allows more strict checks to the min/max values
accepted, which is useful for defining registers like implemented by
i915 and xe drivers with their REG_GENMASK*() macros.
The strict checks rely on shift-count-overflow compiler check to fail
the build if a number outside of the range allowed is passed.
Example:
#define FOO_MASK GENMASK_U32(33, 4)
will generate a warning like:
include/linux/bits.h:51:27: error: right shift count >= width of type [-Werror=shift-count-overflow]
51 | type_max(t) >> (BITS_PER_TYPE(t) - 1 - (h)))))
| ^~
The result is casted to the corresponding fixed width type. For
example, GENMASK_U8() returns an u8. Note that because of the C
promotion rules, GENMASK_U8() and GENMASK_U16() will immediately be
promoted to int if used in an expression. Regardless, the main goal is
not to get the correct type, but rather to enforce more checks at
compile time.
While GENMASK_TYPE() is crafted to cover all variants, including the
already existing GENMASK(), GENMASK_ULL() and GENMASK_U128(), for the
moment, only use it for the newly introduced GENMASK_U*(). The
consolidation will be done in a separate change.
Co-developed-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Yury Norov <yury.norov@gmail.com>
Stable-dep-of: 2ba5772e530f ("gpio: idio-16: Define fixed direction of the GPIO lines") Signed-off-by: William Breathitt Gray <wbg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a preparation for the upcoming GENMASK_U*() and BIT_U*()
changes. After introducing those new macros, there will be a lot of
scrolling between the #if, #else and #endif.
Add a comment to the #else and #endif preprocessor macros to help keep
track of which context we are in. Also, add new lines to better
visually separate the non-asm and asm sections.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Yury Norov <yury.norov@gmail.com>
Stable-dep-of: 2ba5772e530f ("gpio: idio-16: Define fixed direction of the GPIO lines") Signed-off-by: William Breathitt Gray <wbg@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ip netns add ns1
ip netns exec ns1 ip link add bond0 type bond mode balance-rr
ip netns exec ns1 ip link set dev bond0 xdp obj af_xdp_kern.o sec xdp
ip netns exec ns1 ip link set bond0 type bond mode broadcast
ip netns del ns1
When delete the namespace, dev_xdp_uninstall() is called to remove xdp
program on bond dev, and bond_xdp_set() will check the bond mode. If bond
mode is changed after attaching xdp program, the warning may occur.
Some bond modes (broadcast, etc.) do not support native xdp. Set bond mode
with xdp program attached is not good. Add check for xdp program when set
bond mode.
Bonding only supports native XDP for specific modes, which can lead to
confusion for users regarding why XDP loads successfully at times and
fails at others. This patch enhances error handling by returning detailed
error messages, providing users with clearer insights into the specific
reasons for the failure when loading native XDP.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://patch.msgid.link/20241021031211.814-2-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Rajani Kantha <681739313@139.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Callers of wdev_chandef() must hold the wiphy mutex.
But the worker cfg80211_propagate_cac_done_wk() never takes the lock.
Which triggers the warning below with the mesh_peer_connected_dfs
test from hostapd and not (yet) released mac80211 code changes:
Fixes: 26ec17a1dc5e ("cfg80211: Fix radar event during another phy CAC") Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de> Link: https://patch.msgid.link/20250717162547.94582-1-Alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[ The author recommends that when porting to older kernels, we should use wiphy_lock()
and wiphy_unlock() instead of guard(). This tip is mentioned in the link:
https://patch.msgid.link/20250717162547.94582-1-Alexander@wetzel-home.de. ] Signed-off-by: Alva Lan <alvalan9@foxmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Concurrent pinfile allocation may run out of free section, result in
panic in get_new_segment(), let's expand pin_sem lock coverage to
include f2fs_gc(), so that we can make sure to reclaim enough free
space for following allocation.
In addition, do below changes to enhance error path handling:
- call f2fs_bug_on() only in non-pinfile allocation path in
get_new_segment().
- call reset_curseg_fields() to reset all fields of curseg in
new_curseg()
The special C-flag case expects the ADD_ADDR to be received when
switching to 'fully-established'. But for various reasons, the ADD_ADDR
could be sent after the "4th ACK", and the special case doesn't work.
On NIPA, the new test validating this special case for the C-flag failed
a few times, e.g.
102 default limits, server deny join id 0
syn rx [FAIL] got 0 JOIN[s] syn rx expected 2
Server ns stats
(...)
MPTcpExtAddAddrTx 1
MPTcpExtEchoAdd 1
synack rx [FAIL] got 0 JOIN[s] synack rx expected 2
ack rx [FAIL] got 0 JOIN[s] ack rx expected 2
join Rx [FAIL] see above
syn tx [FAIL] got 0 JOIN[s] syn tx expected 2
join Tx [FAIL] see above
I had a suspicion about what the issue could be: the ADD_ADDR might have
been received after the switch to the 'fully-established' state. The
issue was not easy to reproduce. The packet capture shown that the
ADD_ADDR can indeed be sent with a delay, and the client would not try
to establish subflows to it as expected.
A simple fix is not to mark the endpoints as 'used' in the C-flag case,
when looking at creating subflows to the remote initial IP address and
port. In this case, there is no need to try.
Note: newly added fullmesh endpoints will still continue to be used as
expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case.
Fixes: 4b1ff850e0c1 ("mptcp: pm: in-kernel: usable client side with C-flag") Cc: stable@vger.kernel.org Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-1-8207030cb0e8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ applied to pm_netlink.c instead of pm_kernel.c ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To prevent test instability in the "delete re-add signal" test caused by
ADD_ADDR retransmissions, disable retransmissions for this test by setting
net.mptcp.add_addr_timeout to 0.
Suggested-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-6-521fe9957892@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: c3496c052ac3 ("selftests: mptcp: join: mark 'delete re-add signal' as skipped if not supported") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ErrorString() and SafeString() docutils functions were helpers meant to
ease the handling of encodings during the Python 3 transition. There is no
real need for them after Python 3.6, and docutils 0.22 removes them,
breaking the docs build
Handle this by just injecting our own one-liner version of ErrorString(),
and removing the sole SafeString() call entirely.
Reported-by: Zhixu Liu <zhixu.liu@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <87ldmnv2pi.fsf@trenco.lwn.net>
[ Salvatore Bonaccorso: Backport to v6.17.y for context changes in
Documentation/sphinx/kernel_include.py with major refactorings for the v6.18
development cycle. Backport ErrorString definition as well to
Documentation/sphinx/kernel_abi.py file for 6.12.y where it is imported
from docutils before the faccc0ec64e1 ("docs: sphinx/kernel_abi: adjust
coding style") change. ] Suggested-by: Andreas Radke <andreas.radke@mailbox.org> Signed-off-by: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The include/generated/asm-offsets.h is generated in Kbuild during
compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to
generate another similar offset header file, circular dependency can
happen.
For example, we want to generate a offset file include/generated/test.h,
which is included in include/sched/sched.h. If we generate asm-offsets.h
first, it will fail, as include/sched/sched.h is included in asm-offsets.c
and include/generated/test.h doesn't exist; If we generate test.h first,
it can't success neither, as include/generated/asm-offsets.h is included
by it.
In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular
dependency. We can generate asm-offsets.h first, and if the
COMPILE_OFFSETS is defined, we don't include the "generated/test.h".
And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this
purpose.
The qmap dump operation was destructively consuming queue entries while
displaying them. As dump can be triggered anytime, this can easily lead to
stalls. Add a temporary dump_store queue and modify the dump logic to pop
entries, display them, and then restore them back to the original queue.
This allows dump operations to be performed without affecting the
scheduler's queue state.
Note that if racing against new enqueues during dump, ordering can get
mixed up, but this is acceptable for debugging purposes.
After setting the BTRFS_ROOT_FORCE_COW flag on the root we are doing a
full write barrier, smp_wmb(), but we don't need to, all we need is a
smp_mb__after_atomic(). The use of the smp_wmb() is from the old days
when we didn't use a bit and used instead an int field in the root to
signal if cow is forced. After the int field was changed to a bit in
the root's state (flags field), we forgot to update the memory barrier
in create_pending_snapshot() to smp_mb__after_atomic(), but we did the
change in commit_fs_roots() after clearing BTRFS_ROOT_FORCE_COW. That
happened in commit 27cdeb7096b8 ("Btrfs: use bitfield instead of integer
data type for the some variants in btrfs_root"). On the reader side, in
should_cow_block(), we also use the counterpart smp_mb__before_atomic()
which generates further confusion.
So change the smp_wmb() to smp_mb__after_atomic(). In fact we don't
even need any barrier at all since create_pending_snapshot() is called
in the critical section of a transaction commit and therefore no one
can concurrently join/attach the transaction, or start a new one, until
the transaction is unblocked. By the time someone starts a new transaction
and enters should_cow_block(), a lot of implicit memory barriers already
took place by having acquired several locks such as fs_info->trans_lock
and extent buffer locks on the root node at least. Nevertlheless, for
consistency use smp_mb__after_atomic() after setting the force cow bit
in create_pending_snapshot().
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Like inode refs, inode extrefs have a variable length name, which means
we have to do a proper check to make sure no header nor name can exceed
the item limits.
The check itself is very similar to check_inode_ref(), just a different
structure (btrfs_inode_extref vs btrfs_inode_ref).
Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If we fail to update the inode at link_to_fixup_dir(), we don't abort the
transaction and propagate the error up the call chain, which makes it hard
to pinpoint the error to the inode update. So abort the transaction if the
inode update call fails, so that if it happens we known immediately.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We already have the extent buffer's level in an argument, there's no need
to first ensure the extent buffer's data is loaded (by calling
btrfs_read_extent_buffer()) and then call btrfs_header_level() to check
the level. So use the level argument and do the check before calling
btrfs_read_extent_buffer().
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
1) At btrfs_replay_log() we drop the reference of the log root tree if
the call to btrfs_recover_log_trees() failed;
2) But if the call to btrfs_recover_log_trees() did not fail, we don't
drop the reference in btrfs_replay_log() - we expect that
btrfs_recover_log_trees() does it in case it returns success.
Let's simplify this and make btrfs_replay_log() always drop the reference
on the log root tree, not only this simplifies code as it's what makes
sense since it's btrfs_replay_log() who grabbed the reference in the first
place.
Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Replace max_t() followed by min_t() with a single clamp().
As was pointed by David Laight in
https://lore.kernel.org/linux-btrfs/20250906122458.75dfc8f0@pumpkin/
the calculation may overflow u32 when the input value is too large, so
clamp_t() is not used. In practice the expected values are in range of
megabytes to gigabytes (throughput limit) so the bug would not happen.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: David Sterba <dsterba@suse.com>
[ Use clamp() and add explanation. ] Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The hint block group selection in the extent allocator is wrong in the
first place, as it can select the dedicated data relocation block group for
the normal data allocation.
Since we separated the normal data space_info and the data relocation
space_info, we can easily identify a block group is for data relocation or
not. Do not choose it for the normal data allocation.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Now that btrfs_zone_finish_endio_workfn() is directly calling
do_zone_finish() the only caller of btrfs_zone_finish_endio() is
btrfs_finish_one_ordered().
btrfs_finish_one_ordered() already has error handling in-place so
btrfs_zone_finish_endio() can return an error if the block group lookup
fails.
Also as btrfs_zone_finish_endio() already checks for zoned filesystems and
returns early, there's no need to do this in the caller.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the process_one_buffer() log tree walk callback we return errors to the
log tree walk caller and then the caller aborts the transaction, if we
have one, or turns the fs into error state if we don't have one. While
this reduces code it makes it harder to figure out where exactly an error
came from. So add the transaction aborts after every failure inside the
process_one_buffer() callback, so that it helps figuring out why failures
happen.
Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We do several things while walking a log tree (for replaying and for
freeing a log tree) like reading extent buffers and cleaning them up,
but we don't immediately abort the transaction, or turn the fs into an
error state, when one of these things fails. Instead we the transaction
abort or turn the fs into error state in the caller of the entry point
function that walks a log tree - walk_log_tree() - which means we don't
get to know exactly where an error came from.
Improve on this by doing a transaction abort / turn fs into error state
after each such failure so that when it happens we have a better
understanding where the failure comes from. This deliberately leaves
the transaction abort / turn fs into error state in the callers of
walk_log_tree() as to ensure we don't get into an inconsistent state in
case we forget to do it deeper in call chain. It also deliberately does
not do it after errors from the calls to the callback defined in
struct walk_control::process_func(), as we will do it later on another
patch.
Reviewed-by: Boris Burkov <boris@bur.io> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
A previous patch fixed a bug where new_prs should be assigned before
checking housekeeping conflicts. This patch addresses another potential
issue: the nocpu error check currently uses the xcpus which is not updated.
Although no issue has been observed so far, the check should be performed
using the new effective exclusive cpus.
The comment has been removed because the function returns an error if
nocpu checking fails, which is unrelated to the parent.
Newer AMD systems can support up to 16 channels per EDAC "mc" device.
These are detected by the EDAC module running on the device, and the
current EDAC interface is appropriately enumerated.
The legacy EDAC sysfs interface however, provides device attributes for
channels 0 through 11 only. Consequently, the last four channels, 12
through 15, will not be enumerated and will not be visible through the
legacy sysfs interface.
Add additional device attributes to ensure that all 16 channels, if
present, are enumerated by and visible through the legacy EDAC sysfs
interface.
The LFENCE retpoline mitigation is not secure but the kernel prints
inconsistent messages about this fact. The dmesg log says 'Mitigation:
LFENCE', implying the system is mitigated. But sysfs reports 'Vulnerable:
LFENCE' implying the system (correctly) is not mitigated.
Fix this by printing a consistent 'Vulnerable: LFENCE' string everywhere
when this mitigation is selected.
On Intel CPUs, the default retbleed mitigation is IBRS/eIBRS but this
requires that a similar spectre_v2 mitigation is applied. If the user
selects a different spectre_v2 mitigation (like spectre_v2=retpoline) a
warning is printed but sysfs will still report 'Mitigation: IBRS' or
'Mitigation: Enhanced IBRS'. This is incorrect because retbleed is not
mitigated, and IBRS is not actually set.
Fix this by choosing RETBLEED_MITIGATION_NONE in this scenario so the
kernel correctly reports the system as vulnerable to retbleed.
Adding uprobe as another exception to the seccomp filter alongside
with the uretprobe syscall.
Same as the uretprobe the uprobe syscall is installed by kernel as
replacement for the breakpoint exception and is limited to x86_64
arch and isn't expected to ever be supported in i386.
To determine if a task is a kernel thread or not, it is more reliable to
use (current->flags & (PF_KTHREAD|PF_USER_WORKERi)) than to rely on
current->mm being NULL. That is because some kernel tasks (io_uring
helpers) may have a mm field.
ICL_FIXED_0_ADAPTIVE is missed to be added into INTEL_FIXED_BITS_MASK,
add it.
With help of this new INTEL_FIXED_BITS_MASK, intel_pmu_enable_fixed() can
be optimized. The old fixed counter control bits can be unconditionally
cleared with INTEL_FIXED_BITS_MASK and then set new control bits base on
new configuration.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Tested-by: Yi Lai <yi1.lai@intel.com> Link: https://lore.kernel.org/r/20250820023032.17128-7-dapeng1.mi@linux.intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When no audit rules are in place, fanotify event results are
unconditionally dropped due to an explicit check for the existence of
any audit rules. Given this is a report from another security
sub-system, allow it to be recorded regardless of the existence of any
audit rules.
To test, install and run the fapolicyd daemon with default config. Then
as an unprivileged user, create and run a very simple binary that should
be denied. Then check for an event with
ausearch -m FANOTIFY -ts recent
Link: https://issues.redhat.com/browse/RHEL-9065 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)
when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return
value before using it, similar to the existing approach in sch_hfsc.c.
To avoid code duplication, the following changes are made:
1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static
inline function.
2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to
include/net/pkt_sched.h so that sch_qfq can reuse it.
3. Applied qdisc_peek_len in agg_dequeue to avoid crashing.
Signed-off-by: Xiang Mei <xmei5@asu.edu> Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://patch.msgid.link/20250705212143.3982664-1-xmei5@asu.edu Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
handle_response() dereferences the payload as a 4-byte handle without
verifying that the declared payload size is at least 4 bytes. A malformed
or truncated message from ksmbd.mountd can lead to a 4-byte read past the
declared payload size. Validate the size before dereferencing.
This is a minimal fix to guard the initial handle read.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Cc: stable@vger.kernel.org Reported-by: Qianchang Zhao <pioooooooooip@gmail.com> Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The deprecation of the 'attr2' mount option in 6.18 wasn't entirely
successful because nobody noticed that the kernel never printed a
warning about attr2 being set in fstab if the only xfs filesystem is the
root fs; the initramfs mounts the root fs with no mount options; and the
init scripts only conveyed the fstab options by remounting the root fs.
Fix this by making it complain all the time.
Cc: stable@vger.kernel.org # v5.13 Fixes: 92cf7d36384b99 ("xfs: Skip repetitive warnings about mount options") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Update existing xfs_fs_warn_deprecated() callers ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The arm64 copy_highpage() assumes that the destination page is newly
allocated and not MTE-tagged (PG_mte_tagged unset) and warns
accordingly. However, following commit 060913999d7a ("mm: migrate:
support poisoned recover from migrate folio"), folio_mc_copy() is called
before __folio_migrate_mapping(). If the latter fails (-EAGAIN), the
copy will be done again to the same destination page. Since
copy_highpage() already set the PG_mte_tagged flag, this second copy
will warn.
Replace the WARN_ON_ONCE(page already tagged) in the arm64
copy_highpage() with a comment.
Reported-by: syzbot+d1974fc28545a3e6218b@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/68dda1ae.a00a0220.102ee.0065.GAE@google.com Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Will Deacon <will@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: stable@vger.kernel.org # 6.12.x Reviewed-by: Yang Shi <yang@os.amperecomputing.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[ omitted hugetlb MTE changes ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original code causes a circular locking dependency found by lockdep.
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 Tainted: G S U
------------------------------------------------------
xe_fault_inject/5091 is trying to acquire lock: ffff888156815688 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}, at: __flush_work+0x25d/0x660
projects / thirdparty / kernel / stable.git / log
