Hans de Goede [Sun, 21 Dec 2025 16:57:40 +0000 (17:57 +0100)]
fbdev: Use device_create_with_groups() to fix sysfs groups registration race
The fbdev sysfs attributes are registered after sending the uevent for
the device creation, leaving a race window where e.g. udev rules may
not be able to access the sysfs attributes because the registration is
not done yet.
Fix this by switching to device_create_with_groups(). This also results in
a nice cleanup. After switching to device_create_with_groups() all that
is left of fb_init_device() is setting the drvdata and that can be passed
to device_create[_with_groups]() too. After which fb_init_device() can
be completely removed.
Dropping fb_init_device() + fb_cleanup_device() in turn allows removing
fb_info.class_flag as they were the only user of this field.
Fixes: 5fc830d6aca1 ("fbdev: Register sysfs groups through device_add_group") Cc: stable@vger.kernel.org Cc: Shixiong Ou <oushixiong@kylinos.cn> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: smscufx: properly copy ioctl memory to kernelspace
The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from
userspace to kernelspace, and instead directly references the memory,
which can cause problems if invalid data is passed from userspace. Fix
this all up by correctly copying the memory before accessing it within
the kernel.
Guangshuo Li [Sun, 7 Dec 2025 07:25:32 +0000 (15:25 +0800)]
fbdev: rivafb: fix divide error in nv3_arb()
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
Linus Torvalds [Sat, 14 Feb 2026 03:33:39 +0000 (19:33 -0800)]
Merge tag 'bootconfig-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- Update the bootconfig parser to stop searching for a value when it
encounters a newline character
- Update the tests for bootconfig parser to ensure the good examples to
be parsed correctly by comparing the expected results
* tag 'bootconfig-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Check the parsed output of the good examples
bootconfig: Terminate value search if it hits a newline
Linus Torvalds [Sat, 14 Feb 2026 03:25:16 +0000 (19:25 -0800)]
Merge tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To
differentiate that code from the C code, add entries in for the
RUST version (with "[RUST]" around it) so that the right
maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active
filters enabled in the trace instance, the file show_event_filters
will list them so that there's only one file that needs to be
examined to see if any filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active
triggers enabled in the trace instance, the file
show_event_triggers will list them so that there's only one file
that needs to be examined to see if any triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace
instances instead of the top level instance. But if
traceoff_on_warning triggers, it doesn't stop the buffer with
trace_printk() and that data can easily be lost by being
overwritten. Have traceoff_on_warning also disable the instance
that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file
exists for every event. This displays the internal data of any
histogram enabled for that event. But it is lacking the function
that is called to process one of its fields. This is very useful
information that was missing when debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently
the size of the stack that is stored is limited to just 16 entries.
But the storage space in the histogram is 256 bytes, meaning that
it can store up to 31 entries (plus one for the count of entries).
Instead of letting that space go to waste, up the limit from 16 to
31. This makes the keys much more useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only
in a previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring
buffer if it contains data from a previous boot. It is cleared when
recording starts again, but it is not cleared when the buffer is
reset. The data is useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some
updates to the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because
it expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run
completely on the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event
happens, an irq work is triggered to wake up that waiter. This is
noisy on isolated CPUs (running NO_HZ_FULL). Trigger an IPI to a
house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after
it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into
their numbers in the trace event format files. This work queue can
also be used for other aspects of tracing that takes some time and
shouldn't be called by the init call code.
The blk_trace initialization takes a bit of time. Have the
initialization code moved to the new tracing generic work queue
function.
- Skip kprobe boot event creation call if there's no kprobes defined
on cmdline
The kprobe initialization to set up kprobes if they are defined on
the cmdline requires taking the event_mutex lock. This can be held
by other tracing code doing initialization for a long time. Since
kprobes added to the kernel command line need to be setup
immediately, as they may be tracing early initialization code, they
cannot be postponed in a work queue and must be setup in the
initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to
take the mutex and slow down the boot up code waiting to get the
lock only to find out there's nothing to do. Simply exit out early
if there's no kprobes on the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about
tracing over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more
difficult to maintain. Start splitting it up so that related code
is in their own files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of
the main buffer and gets swapped with it when a new high latency is
detected. This keeps the trace up to the highest latency around
where this max_latency buffer is never written to. It is only used
to save the last max latency trace.
A while ago a snapshot feature was added to tracefs to allow user
space to perform the same logic. It could also enable events to
trigger a "snapshot" if one of their fields hit a new high. This
was built on top of the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency
tracers to be enabled. In reality, the latency tracers depend on
the snapshot code and not the other way around. It was just that
they came first.
Restructure the code and the kconfigs to have the latency tracers
depend on snapshot code instead. This actually simplifies the logic
a bit and allows to disable more when the latency tracers are not
defined and the snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable
that could be changed by user space for each sample. If the user
change this variable, it could cause a bus contention, and reading
that variable can show up as a large latency in the trace causing a
false positive. Read this variable at the start of the sample with
a READ_ONCE() into a local variable and keep the code from sharing
cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses
a static branch to call that tracer directly. When another tracer
is added, it goes into loop logic to call all the registered
callbacks.
The code was incorrect when going back to one tracer and never
re-enabled the static branch again to do the optimization code.
- And other small fixes and cleanups"
* tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (46 commits)
function_graph: Restore direct mode when callbacks drop to one
tracing: Fix indentation of return statement in print_trace_fmt()
tracing: Reset last_boot_info if ring buffer is reset
tracing: Fix to set write permission to per-cpu buffer_size_kb
tracing: Fix false sharing in hwlat get_sample()
tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection
tracing: Better separate SNAPSHOT and MAX_TRACE options
tracing: Add tracer_uses_snapshot() helper to remove #ifdefs
tracing: Rename trace_array field max_buffer to snapshot_buffer
tracing: Move pid filtering into trace_pid.c
tracing: Move trace_printk functions out of trace.c and into trace_printk.c
tracing: Use system_state in trace_printk_init_buffers()
tracing: Have trace_printk functions use flags instead of using global_trace
tracing: Make tracing_update_buffers() take NULL for global_trace
tracing: Make printk_trace global for tracing system
tracing: Move ftrace_trace_stack() out of trace.c and into trace.h
tracing: Move __trace_buffer_{un}lock_*() functions to trace.h
tracing: Make tracing_selftest_running global to the tracing subsystem
tracing: Make tracing_disabled global for tracing system
tracing: Clean up use of trace_create_maxlat_file()
...
Linus Torvalds [Fri, 13 Feb 2026 23:39:15 +0000 (15:39 -0800)]
Merge tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
Linus Torvalds [Fri, 13 Feb 2026 23:06:58 +0000 (15:06 -0800)]
Merge tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- prioritize ofpart in physmap-core probing
- conversions to scoped for each OF child loops
Bindings:
- The bulk of the changes consists of binding fixes/updates to
restrict the use of undefined properties, which was mostly
ineffective in the current form because of the nesting of partition
nodes and the lack of compatible strings
- YAML conversions and the addition of a dma-coherent property in the
cdns,hp-nfc driver
SPI NAND:
- support for octal DTR modes (8D-8D-8D)
- support for Foresee F35SQB002G chips
And small misc fixes"
* tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (65 commits)
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all()
mtd: spinand: fix NULL pointer dereference in spinand_support_vendor_ops()
mtd: rawnand: pl353: Add message about ECC mode
mtd: rawnand: pl353: Fix software ECC support
mtd: spinand: winbond: Remove unneeded semicolon
dt-bindings: mtd: cdns,hp-nfc: Add dma-coherent property
mtd: spinand: Disable continuous read during probe
mtd: spinand: add Foresee F35SQB002G flash support
mtd: spinand: winbond: W35N octal DTR support
mtd: spinand: Add octal DTR support
mtd: spinand: Warn if using SSDR-only vendor commands in a non SSDR mode
mtd: spinand: Give the bus interface to the configuration helper
mtd: spinand: Propagate the bus interface across core helpers
mtd: spinand: Add support for setting a bus interface
mtd: spinand: Gather all the bus interface steps in one single function
mtd: spinand: winbond: Configure the IO mode after the dummy cycles
mtd: spinand: winbond: Rename IO_MODE register macro
mtd: spinand: winbond: Fix style
mtd: spinand: winbond: Register W35N vendor specific operation
mtd: spinand: winbond: Register W25N vendor specific operation
...
Linus Torvalds [Fri, 13 Feb 2026 20:13:27 +0000 (12:13 -0800)]
Merge tag 'mm-hotfixes-stable-2026-02-13-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"Three MM hotfixes, all three are cc:stable"
* tag 'mm-hotfixes-stable-2026-02-13-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
procfs: fix possible double mmput() in do_procmap_query()
mm/page_alloc: skip debug_check_no_{obj,locks}_freed with FPI_TRYLOCK
mm/hugetlb: restore failed global reservations to subpool
Linus Torvalds [Fri, 13 Feb 2026 20:02:18 +0000 (12:02 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- in-order support in virtio core
- multiple address space support in vduse
- fixes, cleanups all over the place, notably dma alignment fixes for
non-cache-coherent systems
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits)
vduse: avoid adding implicit padding
vhost: fix caching attributes of MMIO regions by setting them explicitly
vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr()
vdpa/mlx5: reuse common function for MAC address updates
vdpa/mlx5: update mlx_features with driver state check
crypto: virtio: Replace package id with numa node id
crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req
crypto: virtio: Add spinlock protection with virtqueue notification
Documentation: Add documentation for VDUSE Address Space IDs
vduse: bump version number
vduse: add vq group asid support
vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls
vduse: take out allocations from vduse_dev_alloc_coherent
vduse: remove unused vaddr parameter of vduse_domain_free_coherent
vduse: refactor vdpa_dev_add for goto err handling
vhost: forbid change vq groups ASID if DRIVER_OK is set
vdpa: document set_group_asid thread safety
vduse: return internal vq group struct as map token
vduse: add vq group support
vduse: add v1 API definition
...
Linus Torvalds [Fri, 13 Feb 2026 19:31:15 +0000 (11:31 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Loongarch:
- Add more CPUCFG mask bits
- Improve feature detection
- Add lazy load support for FPU and binary translation (LBT) register
state
- Fix return value for memory reads from and writes to in-kernel
devices
- Add support for detecting preemption from within a guest
- Add KVM steal time test case to tools/selftests
ARM:
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers
- More pKVM fixes for features that are not supposed to be exposed to
guests
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest
- Preliminary work for guest GICv5 support
- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures
- A small set of FPSIMD cleanups
- Selftest fixes addressing the incorrect alignment of page
allocation
- Other assorted low-impact fixes and spelling fixes
RISC-V:
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Transparent huge page support for hypervisor page tables
- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables
- Add RISC-V specific paging modes to KVM selftests
- Detect paging mode at runtime for selftests
s390:
- Performance improvement for vSIE (aka nested virtualization)
- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host
- Maintainership change for s390 vfio-pci
- Small quality of life improvement for protected guests
x86:
- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).
KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.
For more information, see the commit message for merge commit bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...")
- Disallow changing the virtual CPU model if L2 is active, for all
the same reasons KVM disallows change the model after the first
KVM_RUN
- Fix a bug where KVM would incorrectly reject host accesses to PV
MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
even if those were advertised as supported to userspace,
- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
where KVM would attempt to read CR3 configuring an async #PF entry
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
(for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
Only a few exports that are intended for external usage, and those
are allowed explicitly
- When checking nested events after a vCPU is unblocked, ignore
-EBUSY instead of WARNing. Userspace can sometimes put the vCPU
into what should be an impossible state, and spurious exit to
userspace on -EBUSY does not really do anything to solve the issue
- Also throw in the towel and drop the WARN on INIT/SIPI being
blocked when vCPU is in Wait-For-SIPI, which also resulted in
playing whack-a-mole with syzkaller stuffing architecturally
impossible states into KVM
- Add support for new Intel instructions that don't require anything
beyond enumerating feature flags to userspace
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2
- Add WARNs to guard against modifying KVM's CPU caps outside of the
intended setup flow, as nested VMX in particular is sensitive to
unexpected changes in KVM's golden configuration
- Add a quirk to allow userspace to opt-in to actually suppress EOI
broadcasts when the suppression feature is enabled by the guest
(currently limited to split IRQCHIP, i.e. userspace I/O APIC).
Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
option as some userspaces have come to rely on KVM's buggy behavior
(KVM advertises Supress EOI Broadcast irrespective of whether or
not userspace I/O APIC supports Directed EOIs)
- Clean up KVM's handling of marking mapped vCPU pages dirty
- Drop a pile of *ancient* sanity checks hidden behind in KVM's
unused ASSERT() macro, most of which could be trivially triggered
by the guest and/or user, and all of which were useless
- Fold "struct dest_map" into its sole user, "struct rtc_status", to
make it more obvious what the weird parameter is used for, and to
allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n
- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y
- Add a regression test for recent APICv update fixes
- Handle "hardware APIC ISR", a.k.a. SVI, updates in
kvm_apic_update_apicv() to consolidate the updates, and to
co-locate SVI updates with the updates for KVM's own cache of ISR
information
- Drop a dead function declaration
- Minor cleanups
x86 (Intel):
- Rework KVM's handling of VMCS updates while L2 is active to
temporarily switch to vmcs01 instead of deferring the update until
the next nested VM-Exit.
The deferred updates approach directly contributed to several bugs,
was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans
- Fix an SGX bug where KVM would incorrectly try to handle EPCM page
faults, and instead always reflect them into the guest. Since KVM
doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
interference and can't be resolved by KVM
- Fix a bug where KVM would register its posted interrupt wakeup
handler even if loading kvm-intel.ko ultimately failed
- Disallow access to vmcb12 fields that aren't fully supported,
mostly to avoid weirdness and complexity for FRED and other
features, where KVM wants enable VMCS shadowing for fields that
conditionally exist
- Print out the "bad" offsets and values if kvm-intel.ko refuses to
load (or refuses to online a CPU) due to a VMCS config mismatch
x86 (AMD):
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure
- Add support for virtualizing ERAPS. Note, correct virtualization of
ERAPS relies on an upcoming, publicly announced change in the APM
to reduce the set of conditions where hardware (i.e. KVM) *must*
flush the RAP
- Ignore nSVM intercepts for instructions that are not supported
according to L1's virtual CPU model
- Add support for expedited writes to the fast MMIO bus, a la VMX's
fastpath for EPT Misconfig
- Don't set GIF when clearing EFER.SVME, as GIF exists independently
of SVM, and allow userspace to restore nested state with GIF=0
- Treat exit_code as an unsigned 64-bit value through all of KVM
- Add support for fetching SNP certificates from userspace
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when
emulating VMLOAD or VMSAVE on behalf of L2
- Misc fixes and cleanups
x86 selftests:
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
support, and extend x86's infrastructure to support EPT and NPT
(for L2 guests)
- Extend several nested VMX tests to also cover nested SVM
- Add a selftest for nested VMLOAD/VMSAVE
- Rework the nested dirty log test, originally added as a regression
test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
improve test coverage and to hopefully make the test easier to
understand and maintain
guest_memfd:
- Remove kvm_gmem_populate()'s preparation tracking and half-baked
hugepage handling. SEV/SNP was the only user of the tracking and it
can do it via the RMP
- Retroactively document and enforce (for SNP) that
KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
source page to be 4KiB aligned, to avoid non-trivial complexity for
something that no known VMM seems to be doing and to avoid an API
special case for in-place conversion, which simply can't support
unaligned sources
- When populating guest_memfd memory, GUP the source page in common
code and pass the refcounted page to the vendor callback, instead
of letting vendor code do the heavy lifting. Doing so avoids a
looming deadlock bug with in-place due an AB-BA conflict betwee
mmap_lock and guest_memfd's filemap invalidate lock
Generic:
- Fix a bug where KVM would ignore the vCPU's selected address space
when creating a vCPU-specific mapping of guest memory. Actually
this bug could not be hit even on x86, the only architecture with
multiple address spaces, but it's a bug nevertheless"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
KVM: s390: Increase permitted SE header size to 1 MiB
MAINTAINERS: Replace backup for s390 vfio-pci
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
KVM: s390: vsie: Fix race in walk_guest_tables()
KVM: s390: Use guest address to mark guest page dirty
irqchip/riscv-imsic: Adjust the number of available guest irq files
RISC-V: KVM: Transparent huge page support
RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
RISC-V: KVM: Allow Zalasr extensions for Guest/VM
KVM: riscv: selftests: Add riscv vm satp modes
KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
RISC-V: KVM: Remove unnecessary 'ret' assignment
KVM: s390: Add explicit padding to struct kvm_s390_keyop
KVM: LoongArch: selftests: Add steal time test case
LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
LoongArch: KVM: Add paravirt preempt feature in hypervisor side
...
Linus Torvalds [Fri, 13 Feb 2026 19:24:38 +0000 (11:24 -0800)]
Merge tag 'uml-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull UML updates from Johannes Berg:
"UML was _really_ quiet, with just four small commits:
- two signal handling fixes
- dynamic addition of virtio devices
- a single code cleanup"
* tag 'uml-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
arch/um: remove unused varible err in remove_files_and_dir()
um: virtio_uml: Support adding devices via mconsole
um: Handle SIGCHLD in seccomp mode like other IRQ signals
um: Preserve errno within signal handler
Thomas Weißschuh [Fri, 13 Feb 2026 07:39:29 +0000 (08:39 +0100)]
ARM: clean up the memset64() C wrapper
The current logic to split the 64-bit argument into its 32-bit halves is
byte-order specific and a bit clunky. Use a union instead which is
easier to read and works in all cases.
GCC still generates the same machine code.
While at it, rename the arguments of the __memset64() prototype to
actually reflect their semantics.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Weißschuh [Fri, 13 Feb 2026 07:35:14 +0000 (08:35 +0100)]
alpha: add missing address argument in call to page_table_check_pte_clear()
After the merge of the alpha and mm trees, this code does not compile,
as a parameter is missing in a call to page_table_check_pte_clear().
The parameter was re-added in commit d7b4b67eb6b3 ("mm/page_table_check:
reinstate address parameter in [__]page_table_check_pte_clear()").
The alpha-specific code was newly added in commit dd5712f3379c ("alpha:
fix user-space corruption during memory compaction").
Fixes: 4cff5c05e076 ("Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm") Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Acked-by: Magnus Lindholm <linmag7@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Miquel Raynal [Fri, 13 Feb 2026 17:10:09 +0000 (18:10 +0100)]
Merge tag 'nand/for-7.0' into mtd/next
SPI NAND
- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.
Shengming Hu [Fri, 13 Feb 2026 06:29:32 +0000 (14:29 +0800)]
function_graph: Restore direct mode when callbacks drop to one
When registering a second fgraph callback, direct path is disabled and
array loop is used instead. When ftrace_graph_active falls back to one,
we try to re-enable direct mode via ftrace_graph_enable_direct(true, ...).
But ftrace_graph_enable_direct() incorrectly disables the static key
rather than enabling it. This leaves fgraph_do_direct permanently off
after first multi-callback transition, so direct fast mode is never
restored.
Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260213142932519cuWSpEXeS4-UnCvNXnK2P@zte.com.cn Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function") Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Linus Torvalds [Fri, 13 Feb 2026 03:17:44 +0000 (19:17 -0800)]
Merge tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Add support for control flow integrity for userspace processes.
This is based on the standard RISC-V ISA extensions Zicfiss and
Zicfilp
- Improve ptrace behavior regarding vector registers, and add some
selftests
- Optimize our strlen() assembly
- Enable the ISO-8859-1 code page as built-in, similar to ARM64, for
EFI volume mounting
- Clean up some code slightly, including defining copy_user_page() as
copy_page() rather than memcpy(), aligning us with other
architectures; and using max3() to slightly simplify an expression
in riscv_iommu_init_check()
* tag 'riscv-for-linus-7.0-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: lib: optimize strlen loop efficiency
selftests: riscv: vstate_exec_nolibc: Use the regular prctl() function
selftests: riscv: verify ptrace accepts valid vector csr values
selftests: riscv: verify ptrace rejects invalid vector csr inputs
selftests: riscv: verify syscalls discard vector context
selftests: riscv: verify initial vector state with ptrace
selftests: riscv: test ptrace vector interface
riscv: ptrace: validate input vector csr registers
riscv: csr: define vtype register elements
riscv: vector: init vector context with proper vlenb
riscv: ptrace: return ENODATA for inactive vector extension
kselftest/riscv: add kselftest for user mode CFI
riscv: add documentation for shadow stack
riscv: add documentation for landing pad / indirect branch tracking
riscv: create a Kconfig fragment for shadow stack and landing pad support
arch/riscv: add dual vdso creation logic and select vdso based on hw
arch/riscv: compile vdso with landing pad and shadow stack note
riscv: enable kernel access to shadow stack memory via the FWFT SBI call
riscv: add kernel command line option to opt out of user CFI
riscv/hwprobe: add zicfilp / zicfiss enumeration in hwprobe
...
Linus Torvalds [Fri, 13 Feb 2026 02:24:37 +0000 (18:24 -0800)]
Merge tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"power-supply core:
- sysfs: constify pointer passed to dev_attr_psp
- extend DT binding documentation for battery cells to allow
describing voltage drop behaviour
power-supply drivers:
- multiple: Remove unused gpio include header
- multiple: Fix potential IRQ use-after-free on driver unload
- bd71828: Add support for ROHM BD72720
- misc small fixes
reset drivers:
- tdx-ec-poweroff: fix restart"
* tag 'for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (30 commits)
power: supply: bd71828: Use dev_err_probe()
dt-bindings: power: supply: google,goldfish-battery: Convert to DT schema
power: supply: qcom_battmgr: Recognize "LiP" as lithium-polymer
power: supply: wm97xx: Use devm_power_supply_register()
power: supply: wm97xx: Use devm_kcalloc()
power: supply: pm8916_lbc: Fix use-after-free for extcon in IRQ handler
power: reset: tdx-ec-poweroff: fix restart
docs: power: update documentation about removed function
power: supply: wm97xx: Fix NULL pointer dereference in power_supply_changed()
MAINTAINERS: adjust file entry in ROHM BD71828 CHARGER
power: supply: ab8500_chargalg: improve kernel-doc
power: supply: sysfs: Constify pointer passed to dev_attr_psp()
power: supply: bq27xxx: fix wrong errno when bus ops are unsupported
power: reset: nvmem-reboot-mode: respect cell size for nvmem_cell_write
power: supply: sbs-battery: Fix use-after-free in power_supply_changed()
power: supply: rt9455: Fix use-after-free in power_supply_changed()
power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed()
power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed()
power: supply: pf1550: Fix use-after-free in power_supply_changed()
power: supply: goldfish: Fix use-after-free in power_supply_changed()
...
Linus Torvalds [Fri, 13 Feb 2026 01:49:33 +0000 (17:49 -0800)]
Merge tag 'nfs-for-7.0-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Use an LRU list for returning unused delegations
- Introduce a KConfig option to disable NFS v4.0 and make NFS v4.1
the default
Bugfixes:
- NFS/localio:
- Handle short writes by retrying
- Prevent direct reclaim recursion into NFS via nfs_writepages
- Use GFP_NOIO and non-memreclaim workqueue in nfs_local_commit
- Remove -EAGAIN handling in nfs_local_doio()
- pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN
- fs/nfs: Fix a readdir slow-start regression
- SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
Other cleanups and improvements:
- A few other NFS/localio cleanups
- Various other delegation handling cleanups from Christoph
- Unify security_inode_listsecurity() calls
- Improvements to NFSv4 lease handling
- Clean up SUNRPC *_debug fields when CONFIG_SUNRPC_DEBUG is not set"
* tag 'nfs-for-7.0-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (60 commits)
SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path
nfs: nfs4proc: Convert comma to semicolon
SUNRPC: Change list definition method
sunrpc: rpc_debug and others are defined even if CONFIG_SUNRPC_DEBUG unset
NFSv4: limit lease period in nfs4_set_lease_period()
NFSv4: pass lease period in seconds to nfs4_set_lease_period()
nfs: unify security_inode_listsecurity() calls
fs/nfs: Fix readdir slow-start regression
pNFS: fix a missing wake up while waiting on NFS_LAYOUT_DRAIN
NFS: fix delayed delegation return handling
NFS: simplify error handling in nfs_end_delegation_return
NFS: fold nfs_abort_delegation_return into nfs_end_delegation_return
NFS: remove the delegation == NULL check in nfs_end_delegation_return
NFS: use bool for the issync argument to nfs_end_delegation_return
NFS: return void from ->return_delegation
NFS: return void from nfs4_inode_make_writeable
NFS: Merge CONFIG_NFS_V4_1 with CONFIG_NFS_V4
NFS: Add a way to disable NFS v4.0 via KConfig
NFS: Move sequence slot operations into minorversion operations
NFS: Pass a struct nfs_client to nfs4_init_sequence()
...
Linus Torvalds [Fri, 13 Feb 2026 01:19:36 +0000 (17:19 -0800)]
tools/testing: keep legacy generated files around in .gitignore file
People keep removing generated files from .gitignore files even when the
files stay around. Please don't do that: just because the file is no
longer being generated doesn't make it magically go away, and doesn't
make it suddenly be something that should now not be ignored any more.
Fixes: dd2c6ec24fca ("selftests/mm: remove virtual_address_range test") Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: SeongJae Park <sj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 13 Feb 2026 01:12:43 +0000 (17:12 -0800)]
Merge tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ATA updates from Damien Le Moal:
- Cleanup IRQ masking in the handling of completed report zones
commands (Niklas)
- Improve the handling of Thunderbolt attached devices to speed up
device removal (Henry)
- Several patches to generalize the existing max_sec quirks to
facilitates quirking the maximum command size of buggy drives, many
of which have recently showed up with the recent increase of the
default max_sectors block limit (Niklas)
- Cleanup the ahci-platform and sata dt-bindings schema (Rob,
Manivannan)
- Improve device node scan in the ahci-dwc driver (Krzysztof)
- Remove clang W=1 warnings with the ahci-imx and ahci-xgene drivers
(Krzysztof)
- Fix a long standing potential command starvation situation with
non-NCQ commands issued when NCQ commands are on-going (me)
- Limit max_sectors to 8191 on the INTEL SSDSC2KG480G8 SSD (Niklas)
- Remove Vesa Local Bus (VLB) support in the pata_legacy driver (Ethan)
- Simple fixes in the pata_cypress (typo) and pata_ftide010 (timing)
drivers (Ethan, Linus W)
* tag 'ata-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_ftide010: Fix some DMA timings
ata: pata_cypress: fix typo in error message
ata: pata_legacy: remove VLB support
ata: libata-core: Quirk INTEL SSDSC2KG480G8 max_sectors
dt-bindings: ata: sata: Document the graph port
ata: libata-scsi: avoid Non-NCQ command starvation
ata: libata-scsi: refactor ata_scsi_translate()
ata: ahci-xgene: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-imx: Fix Wvoid-pointer-to-enum-cast warning
ata: ahci-dwc: Simplify with scoped for each OF child loop
dt-bindings: ata: ahci-platform: Drop unnecessary select schema
ata: libata: Allow more quirks
ata: libata: Add libata.force parameter max_sec
ata: libata: Add support to parse equal sign in libata.force
ata: libata: Change libata.force to use the generic ATA_QUIRK_MAX_SEC quirk
ata: libata: Add ata_force_get_fe_for_dev() helper
ata: libata: Add ATA_QUIRK_MAX_SEC and convert all device quirks
ata: libata: avoid long timeouts on hot-unplugged SATA DAS
ata: libata-scsi: Remove superfluous local_irq_save()
Linus Torvalds [Fri, 13 Feb 2026 01:05:20 +0000 (17:05 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Usual smallish cycle. The NFS biovec work to push it down into RDMA
instead of indirecting through a scatterlist is pretty nice to see,
been talked about for a long time now.
- Various code improvements in irdma, rtrs, qedr, ocrdma, irdma, rxe
- Small driver improvements and minor bug fixes to hns, mlx5, rxe,
mana, mlx5, irdma
- Robusness improvements in completion processing for EFA
- New query_port_speed() verb to move past limited IBA defined speed
steps
- Support for SG_GAPS in rts and many other small improvements
- Rare list corruption fix in iwcm
- Better support different page sizes in rxe
- Device memory support for mana
- Direct bio vec to kernel MR for use by NFS-RDMA
- QP rate limiting for bnxt_re
- Remote triggerable NULL pointer crash in siw
- DMA-buf exporter support for RDMA mmaps like doorbells"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (66 commits)
RDMA/mlx5: Implement DMABUF export ops
RDMA/uverbs: Add DMABUF object type and operations
RDMA/uverbs: Support external FD uobjects
RDMA/siw: Fix potential NULL pointer dereference in header processing
RDMA/umad: Reject negative data_len in ib_umad_write
IB/core: Extend rate limit support for RC QPs
RDMA/mlx5: Support rate limit only for Raw Packet QP
RDMA/bnxt_re: Report QP rate limit in debugfs
RDMA/bnxt_re: Report packet pacing capabilities when querying device
RDMA/bnxt_re: Add support for QP rate limiting
MAINTAINERS: Drop RDMA files from Hyper-V section
RDMA/uverbs: Add __GFP_NOWARN to ib_uverbs_unmarshall_recv() kmalloc
svcrdma: use bvec-based RDMA read/write API
RDMA/core: add rdma_rw_max_sge() helper for SQ sizing
RDMA/core: add MR support for bvec-based RDMA operations
RDMA/core: use IOVA-based DMA mapping for bvec RDMA operations
RDMA/core: add bio_vec based RDMA read/write API
RDMA/irdma: Use kvzalloc for paged memory DMA address array
RDMA/rxe: Fix race condition in QP timer handlers
RDMA/mana_ib: Add device‑memory support
...
Linus Torvalds [Fri, 13 Feb 2026 00:33:05 +0000 (16:33 -0800)]
Merge tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
- Introduce cxl_memdev_attach and pave way for soft reserved handling,
type2 accelerator enabling, and LSA 2.0 enabling. All these series
require the endpoint driver to settle before continuing the memdev
driver probe.
- Address CXL port error protocol handling and reporting.
The large patch series was split into three parts. The first two
parts are included here with the final part coming later.
The first part consists of a series of code refactoring to PCI AER
sub-system that addresses CXL and also CXL RAS code to prepare for
port error handling.
The second part refactors the CXL code to move management of
component registers to cxl_port objects to allow all CXL AER errors
to be handled through the cxl_port hierarchy.
- Provide AMD Zen5 platform address translation for CXL using ACPI
PRMT. This includes a conventions document to explain why this is
needed and how it's implemented.
- Misc CXL patches of fixes, cleanups, and updates. Including CXL
address translation for unaligned MOD3 regions.
[ TLA service: CXL is "Compute Express Link" ]
* tag 'cxl-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (59 commits)
cxl: Disable HPA/SPA translation handlers for Normalized Addressing
cxl/region: Factor out code into cxl_region_setup_poison()
cxl/atl: Lock decoders that need address translation
cxl: Enable AMD Zen5 address translation using ACPI PRMT
cxl/acpi: Prepare use of EFI runtime services
cxl: Introduce callback for HPA address ranges translation
cxl/region: Use region data to get the root decoder
cxl/region: Add @hpa_range argument to function cxl_calc_interleave_pos()
cxl/region: Separate region parameter setup and region construction
cxl: Simplify cxl_root_ops allocation and handling
cxl/region: Store HPA range in struct cxl_region
cxl/region: Store root decoder in struct cxl_region
cxl/region: Rename misleading variable name @hpa to @hpa_range
Documentation/driver-api/cxl: ACPI PRM Address Translation Support and AMD Zen5 enablement
cxl, doc: Moving conventions in separate files
cxl, doc: Remove isonum.txt inclusion
cxl/port: Unify endpoint and switch port lookup
cxl/port: Move endpoint component register management to cxl_port
cxl/port: Map Port RAS registers
cxl/port: Move dport RAS setup to dport add time
...
Linus Torvalds [Thu, 12 Feb 2026 23:52:39 +0000 (15:52 -0800)]
Merge tag 'vfio-v7.0-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
"A small cycle with the bulk in selftests and reintroducing poison
handling in the nvgrace-gpu driver. The rest are fixes, cleanups, and
some dmabuf structure consolidation.
- Update outdated mdev comment referencing the renamed
mdev_type_add() function (Julia Lawall)
- Introduce selftest support for IOMMU mapping of PCI MMIO BARs (Alex
Mastro)
- Relax selftest assertion relative to differences in huge page
handling between legacy (v1) TYPE1 IOMMU mapping behavior and the
compatibility mode supported by IOMMUFD (David Matlack)
- Reintroduce memory poison handling support for non-struct-page-
backed memory in the nvgrace-gpu variant driver (Ankit Agrawal)
- Replace dma_buf_phys_vec with phys_vec to avoid duplicate structure
and semantics (Leon Romanovsky)
- Add missing upstream bridge locking across PCI function reset,
resolving an assertion failure when secondary bus reset is used to
provide that reset (Anthony Pighin)
- Fixes to hisi_acc vfio-pci variant driver to resolve corner case
issues related to resets, repeated migration, and error injection
scenarios (Longfang Liu, Weili Qian)
- Restrict vfio selftest builds to arm64 and x86_64, resolving
compiler warnings on 32-bit archs (Ted Logan)
- Un-deprecate the fsl-mc vfio bus driver as a new maintainer has
stepped up (Ioana Ciornei)"
* tag 'vfio-v7.0-rc1' of https://github.com/awilliam/linux-vfio:
vfio/fsl-mc: add myself as maintainer
vfio: selftests: only build tests on arm64 and x86_64
hisi_acc_vfio_pci: fix the queue parameter anomaly issue
hisi_acc_vfio_pci: resolve duplicate migration states
hisi_acc_vfio_pci: update status after RAS error
hisi_acc_vfio_pci: fix VF reset timeout issue
vfio/pci: Lock upstream bridge for vfio_pci_core_disable()
types: reuse common phys_vec type instead of DMABUF open‑coded variant
vfio/nvgrace-gpu: register device memory for poison handling
mm: add stubs for PFNMAP memory failure registration functions
vfio: selftests: Drop IOMMU mapping size assertions for VFIO_TYPE1_IOMMU
vfio: selftests: Add vfio_dma_mapping_mmio_test
vfio: selftests: Align BAR mmaps for efficient IOMMU mapping
vfio: selftests: Centralize IOMMU mode name definitions
vfio/mdev: update outdated comment
Linus Torvalds [Thu, 12 Feb 2026 23:43:02 +0000 (15:43 -0800)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
Andrii Nakryiko [Tue, 10 Feb 2026 19:27:38 +0000 (11:27 -0800)]
procfs: fix possible double mmput() in do_procmap_query()
When user provides incorrectly sized buffer for build ID for PROCMAP_QUERY
we return with -ENAMETOOLONG error. After recent changes this condition
happens later, after we unlocked mmap_lock/per-VMA lock and did mmput(),
so original goto out is now wrong and will double-mmput() mm_struct. Fix
by jumping further to clean up only vm_file and name_buf.
Link: https://lkml.kernel.org/r/20260210192738.3041609-1-andrii@kernel.org Fixes: b5cbacd7f86f ("procfs: avoid fetching build ID while holding VMA lock") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reported-by: Ruikai Peng <ruikai@pwno.io> Reported-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Thomas Gleixner <tglx@kernel.org> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Reported-by: syzbot+237b5b985b78c1da9600@syzkaller.appspotmail.com Cc: Ruikai Peng <ruikai@pwno.io> Closes: https://lkml.kernel.org/r/CAFD3drOJANTZPuyiqMdqpiRwOKnHwv5QgMNZghCDr-WxdiHvMg@mail.gmail.com Closes: https://lore.kernel.org/all/698aaf3c.050a0220.3b3015.0088.GAE@google.com/T/#u Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename free_pages_prepare() to __free_pages_prepare(), add an fpi_t
parameter, and skip those checks if FPI_TRYLOCK is set. To keep the fpi_t
definition in mm/page_alloc.c, add a wrapper function free_pages_prepare()
that always passes FPI_NONE and use it in mm/compaction.c.
Link: https://lkml.kernel.org/r/20260209062639.16577-1-harry.yoo@oracle.com Fixes: 8c57b687e833 ("mm, bpf: Introduce free_pages_nolock()") Signed-off-by: Harry Yoo <harry.yoo@oracle.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Zi Yan <ziy@nvidia.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Jackman <jackmanb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joshua Hahn [Fri, 16 Jan 2026 20:40:36 +0000 (15:40 -0500)]
mm/hugetlb: restore failed global reservations to subpool
Commit a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool")
fixed an underflow error for hstate->resv_huge_pages caused by incorrectly
attributing globally requested pages to the subpool's reservation.
Unfortunately, this fix also introduced the opposite problem, which would
leave spool->used_hpages elevated if the globally requested pages could
not be acquired. This is because while a subpool's reserve pages only
accounts for what is requested and allocated from the subpool, its "used"
counter keeps track of what is consumed in total, both from the subpool
and globally. Thus, we need to adjust spool->used_hpages in the other
direction, and make sure that globally requested pages are uncharged from
the subpool's used counter.
Each failed allocation attempt increments the used_hpages counter by how
many pages were requested from the global pool. Ultimately, this renders
the subpool unusable, as used_hpages approaches the max limit.
The issue can be reproduced as follows:
1. Allocate 4 hugetlb pages
2. Create a hugetlb mount with max=4, min=2
3. Consume 2 pages globally
4. Request 3 pages from the subpool (2 from subpool + 1 from global)
4.1 hugepage_subpool_get_pages(spool, 3) succeeds.
used_hpages += 3
4.2 hugetlb_acct_memory(h, 1) fails: no global pages left
used_hpages -= 2
5. Subpool now has used_hpages = 1, despite not being able to
successfully allocate any hugepages. It believes it can now only
allocate 3 more hugepages, not 4.
With each failed allocation attempt incrementing the used counter, the
subpool eventually reaches a point where its used counter equals its
max counter. At that point, any future allocations that try to
allocate hugeTLB pages from the subpool will fail, despite the subpool
not having any of its hugeTLB pages consumed by any user.
Once this happens, there is no way to make the subpool usable again,
since there is no way to decrement the used counter as no process is
really consuming the hugeTLB pages.
The underflow issue that the original commit fixes still remains fixed
as well.
Without this fix, used_hpages would keep on leaking if
hugetlb_acct_memory() fails.
Link: https://lkml.kernel.org/r/20260116204037.2270096-1-joshua.hahnjy@gmail.com Fixes: a833a693a490 ("mm: hugetlb: fix incorrect fallback for subpool") Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com> Acked-by: Usama Arif <usama.arif@linux.dev> Cc: David Hildenbrand <david@kernel.org> Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Ma Wupeng <mawupeng1@huawei.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Waiman Long <longman@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Thu, 12 Feb 2026 23:07:50 +0000 (15:07 -0800)]
Merge tag 'for-7.0/io_uring-zcrx-large-buffers-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring large rx buffer support from Jens Axboe:
"Now that the networking updates are upstream, here's the support for
large buffers for zcrx.
Using larger (bigger than 4K) rx buffers can increase the effiency of
zcrx. For example, it's been shown that using 32K buffers can decrease
CPU usage by ~30% compared to 4K buffers"
* tag 'for-7.0/io_uring-zcrx-large-buffers-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/zcrx: implement large rx buffer support
Linus Torvalds [Thu, 12 Feb 2026 22:47:35 +0000 (14:47 -0800)]
Merge tag 'libnvdimm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny:
"A kmap conversion and a bug fix this go around:
- drivers/nvdimm: Use local kmaps
- nvdimm: virtio_pmem: serialize flush requests"
* tag 'libnvdimm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: virtio_pmem: serialize flush requests
drivers/nvdimm: Use local kmaps
Linus Torvalds [Thu, 12 Feb 2026 22:31:02 +0000 (14:31 -0800)]
Merge tag 'trace-rtla-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull RTLA updates from Steven Rostedt:
- Remove unused function declarations
Some functions were removed in recent code consolidation 6.18, but
their prototypes were not removed from headers. Remove them.
- Set stop threshold after enabling instances
Prefer recording samples without stopping on them on the start of
tracing to stopping on samples that are never recorded. This fixes
flakiness of some RTLA tests and unifies behavior of sample
collection between tracefs mode and BPF mode.
- Consolidate usage help message implementation
RTLA tools (osnoise-top, osnoise-hist, timerlat-top, timerlat-hist)
each implement usage help individually. Move common logic between
them into a new function to reduce code duplication.
- Add BPF actions feature
Add option --bpf-action to attach a BPF program (passed as filename
of its ELF representation) to be executed via BPF tail call at
latency threshold.
- Consolidate command line option parsing
Each RTLA tool implements the parsing of command line options
individually. Now that we have a common structure for parameters,
unify the parsing of those options common among all four tools into
one function.
- De-duplicate cgroup common code
Two functions in utils.c, setting cgroup for comm and setting cgroup
for pid, duplicate code for constructing the cgroup path. Extract it
to a new helper function.
- String and error handling fixes and cleanups
There were several instances of unsafe string and error handling that
could cause invalid memory access; fix them. Also, remove a few
unused headers, update .gitignore, and deduplicate code.
* tag 'trace-rtla-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (30 commits)
rtla: Fix parse_cpu_set() bug introduced by strtoi()
rtla: Fix parse_cpu_set() return value documentation
rtla: Ensure null termination after read operations in utils.c
rtla: Make stop_tracing variable volatile
rtla: Add generated output files to gitignore
rtla: Fix NULL pointer dereference in actions_parse
rtla: Remove unused headers
rtla: Remove redundant memset after calloc
rtla: Use standard exit codes for result enum
rtla: Replace atoi() with a robust strtoi()
rtla: Introduce for_each_action() helper
tools/rtla: Deduplicate cgroup path opening code
tools/rtla: Consolidate -H/--house-keeping option parsing
tools/rtla: Consolidate -P/--priority option parsing
tools/rtla: Consolidate -e/--event option parsing
tools/rtla: Consolidate -d/--duration option parsing
tools/rtla: Consolidate -D/--debug option parsing
tools/rtla: Consolidate -C/--cgroup option parsing
tools/rtla: Consolidate -c/--cpus option parsing
tools/rtla: Add common_parse_options()
...
Linus Torvalds [Thu, 12 Feb 2026 22:08:49 +0000 (14:08 -0800)]
Merge tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier updates from Steven Rostedt:
- Refactor da_monitor to minimize macros
Complete refactor of da_monitor.h to reduce reliance on macros
generating functions. Use generic static functions and uses the
preprocessor only when strictly necessary (e.g. for tracepoint
handlers).
The change essentially relies on functions with generic names (e.g.
da_handle) instead of monitor-specific as well adding the need to
define constant (e.g. MONITOR_NAME, MONITOR_TYPE) before including
the header rather than calling macros that would define functions.
Also adapt monitors and documentation accordingly.
- Cleanup DA code generation scripts
Clean up functions in dot2c removing reimplementations of trivial
library functions (__buff_to_string) and removing some other unused
intermediate steps.
- Annotate functions with types in the rvgen python scripts
- Remove superfluous assignments and cleanup generated code
The rvgen scripts generate a superfluous assignment to 0 for enum
variables and don't add commas to the last elements, which is against
the kernel coding standards. Change the generation process for a
better compliance and slightly simpler logic.
- Remove superfluous declarations from generated code
The monitor container source files contained a declaration and a
definition for the rv_monitor variable. The former is superfluous and
was removed.
- Fix reference to outdated documentation
s/da_monitor_synthesis.rst/monitor_synthesis.rst in comment in
da_monitor.h
* tag 'trace-rv-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix documentation reference in da_monitor.h
verification/rvgen: Remove unused variable declaration from containers
verification/dot2c: Remove superfluous enum assignment and add last comma
verification/dot2c: Remove __buff_to_string() and cleanup
verification/rvgen: Annotate DA functions with types
verification/rvgen: Adapt dot2k and templates after refactoring da_monitor.h
Documentation/rv: Adapt documentation after da_monitor refactoring
rv: Cleanup da_monitor after refactor
rv: Refactor da_monitor to minimise macros
Linus Torvalds [Thu, 12 Feb 2026 22:04:43 +0000 (14:04 -0800)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"The main focus for this series has been to improve OpenRISC kernel
out-of-the-box support for FPGA dev boards.
- Add device tree configurations for De0 Nano single and multicore
configurations
- Fix bug in OpenRISC SMP preventing the kernel from running on FPGA
boards, due to IPIs not being unmasked on secondary CPUs in some
configurations
- Pick up a fix from Brian Masney defining the nop() macro to fix
build failures on OpenRISC for drivers using it"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: define arch-specific version of nop()
openrisc: dts: Add de0 nano multicore config and devicetree
openrisc: dts: Split simple smp dts to dts and dtsi
openrisc: Fix IPIs on simple multicore systems
openrisc: dts: Add de0 nano config and devicetree
Linus Torvalds [Thu, 12 Feb 2026 22:01:38 +0000 (14:01 -0800)]
Merge tag 'configfs-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux
Pull configfs updates from Andreas Hindborg:
- Switch the configfs rust bindings to use c string literals provided
by the compiler, rather than a macro
- A follow up on constifying `configfs_item_operations`, applying the
change to the configfs sample
* tag 'configfs-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/a.hindborg/linux:
samples: configfs: Constify struct configfs_item_operations and configfs_group_operations
rust: configfs: replace `kernel::c_str!` with C-Strings
Linus Torvalds [Thu, 12 Feb 2026 20:13:01 +0000 (12:13 -0800)]
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Linus Torvalds [Thu, 12 Feb 2026 19:32:37 +0000 (11:32 -0800)]
Merge tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
Linus Torvalds [Thu, 12 Feb 2026 18:57:57 +0000 (10:57 -0800)]
Merge tag 'fs_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and isofs updates from Jan Kara:
- a fix for quotactl livelock during filesystem freezing
- a small improvement for isofs
- a documentation fix for ext2
* tag 'fs_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
isofs: support full length file names (255 instead of 253)
quota: fix livelock between quotactl and freeze_super
doc : fix a broken link in ext2.rst
Linus Torvalds [Thu, 12 Feb 2026 18:52:46 +0000 (10:52 -0800)]
Merge tag 'fsnotify_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"A set of fixes to shutdown fsnotify subsystem before invalidating
dcache thus addressing some nasty possible races"
* tag 'fsnotify_for_v6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: Shutdown fsnotify before destroying sb's dcache
fsnotify: Use connector list for destroying inode marks
fsnotify: Track inode connectors for a superblock
Linus Torvalds [Thu, 12 Feb 2026 18:41:34 +0000 (10:41 -0800)]
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux
Pull fsverity updates from Eric Biggers:
"fsverity cleanups, speedup, and memory usage optimization from
Christoph Hellwig:
- Move some logic into common code
- Fix btrfs to reject truncates of fsverity files
- Improve the readahead implementation
- Store each inode's fsverity_info in a hash table instead of using a
pointer in the filesystem-specific part of the inode.
This optimizes for memory usage in the usual case where most files
don't have fsverity enabled.
- Look up the fsverity_info fewer times during verification, to
amortize the hash table overhead"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
fsverity: remove inode from fsverity_verification_ctx
fsverity: use a hashtable to find the fsverity_info
btrfs: consolidate fsverity_info lookup
f2fs: consolidate fsverity_info lookup
ext4: consolidate fsverity_info lookup
fs: consolidate fsverity_info lookup in buffer.c
fsverity: push out fsverity_info lookup
fsverity: deconstify the inode pointer in struct fsverity_info
fsverity: kick off hash readahead at data I/O submission time
ext4: move ->read_folio and ->readahead to readpage.c
readahead: push invalidate_lock out of page_cache_ra_unbounded
fsverity: don't issue readahead for non-ENOENT errors from __filemap_get_folio
fsverity: start consolidating pagecache code
fsverity: pass struct file to ->write_merkle_tree_block
f2fs: don't build the fsverity work handler for !CONFIG_FS_VERITY
ext4: don't build the fsverity work handler for !CONFIG_FS_VERITY
fs,fsverity: clear out fsverity_info from common code
fs,fsverity: reject size changes on fsverity files in setattr_prepare
Linus Torvalds [Thu, 12 Feb 2026 18:19:58 +0000 (10:19 -0800)]
Merge tag 'ext4_for_linus-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New features and improvements for the ext4 file system
- Avoid unnecessary cache invalidation in the extent status cache
(es_cache) when adding extents to be cached in the es_cache and we
are not changing the extent tree
- Add a sysfs parameter, err_report_sec, to control how frequently to
log a warning message that file system inconsistency has been
detected (Previously we logged the warning message every 24 hours)
- Avoid unnecessary forced ordered writes when appending to a file
when delayed allocation is enabled
- Defer splitting unwritten extents to I/O completion to improve
write performance of concurrent direct I/O writes to multiple files
- Refactor and add kunit tests to the extent splitting and conversion
code paths
Various Bug Fixes:
- Fix a panic when the debugging DOUBLE_CHECK macro is defined
- Avoid using fast commit for rare and complex file system operations
to make fast commit easier to reason about. This can also avoid
some corner cases that could result in file system inconsistency if
there is a crash between the fast commit before a subsequent full
commit
- Fix memory leaks in error paths
- Fix a false positive reports caused when running stress tests using
mixed huge-page workloads caused by a race between page migration
and bitmap updates
- Fix a potential recursion into file system reclaim when evicting an
inode when fast commit is enabled
- Fix a warning caused by a potential double decrement to the dirty
clusters counter when executing FS_IOC_SHUTDOWN when running a
stress test
- Enable mballoc optimized scanning regardless whether the inode is
using indirect blocks or extent trees to map blocks"
* tag 'ext4_for_linus-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (45 commits)
et4: allow zeroout when doing written to unwritten split
ext4: refactor split and convert extents
ext4: refactor zeroout path and handle all cases
ext4: propagate flags to ext4_convert_unwritten_extents_endio()
ext4: propagate flags to convert_initialized_extent()
ext4: add extent status cache support to kunit tests
ext4: kunit tests for higher level extent manipulation functions
ext4: kunit tests for extent splitting and conversion
ext4: use optimized mballoc scanning regardless of inode format
ext4: always allocate blocks only from groups inode can use
ext4: fix dirtyclusters double decrement on fs shutdown
ext4: fast commit: make s_fc_lock reclaim-safe
ext4: fix e4b bitmap inconsistency reports
ext4: remove redundant NULL check after __GFP_NOFAIL
ext4: remove EXT4_GET_BLOCKS_IO_CREATE_EXT
ext4: simplify the mapping query logic in ext4_iomap_begin()
ext4: remove unused unwritten parameter in ext4_dio_write_iter()
ext4: remove useless ext4_iomap_overwrite_ops
ext4: avoid starting handle when dio writing an unwritten extent
ext4: don't split extent before submitting I/O
...
Linus Torvalds [Thu, 12 Feb 2026 16:57:31 +0000 (08:57 -0800)]
Merge tag 'for-linus-7.0-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
- Fixes for string handling in orangefs-debugfs.c and xattr.c (Thorsten
Blum)
* tag 'for-linus-7.0-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
fs/orangefs: Replace deprecated strcpy with memcpy + strscpy
orangefs: Replace deprecated strcpy with strscpy
Linus Torvalds [Thu, 12 Feb 2026 16:31:12 +0000 (08:31 -0800)]
Merge tag 'v7.0-rc-part1-ksmbd-and-smbdirect-fixes' of git://git.samba.org/ksmbd
Pull smb server and smbdirect updates from Steve French:
- Fix tcp connection leak
- Fix potential use after free when freeing multichannel
- Fix locking problem in showing channel list
- Locking improvement for tree connection
- Fix infinite loop when signing errors
- Add /proc interface for monitoring server state
- Fixes to avoid mixing iWarp and InfiniBand/RoCEv1/RoCEv2
port ranges used for smbdirect
- Fixes for smbdirect credit handling problems, these make
the connections more reliable
* tag 'v7.0-rc-part1-ksmbd-and-smbdirect-fixes' of git://git.samba.org/ksmbd: (32 commits)
ksmbd: fix non-IPv6 build
ksmbd: convert tree_conns_lock to rw_semaphore
ksmbd: fix missing chann_lock while iterating session channel list
ksmbd: add chann_lock to protect ksmbd_chann_list xarray
smb: server: correct value for smb_direct_max_fragmented_recv_size
smb: client: correct value for smbd_max_fragmented_recv_size
smb: server: fix leak of active_num_conn in ksmbd_tcp_new_connection()
ksmbd: add procfs interface for runtime monitoring and statistics
ksmbd: fix infinite loop caused by next_smb2_rcv_hdr_off reset in error paths
smb: server: make use of rdma_restrict_node_type()
smb: client: make use of rdma_restrict_node_type()
RDMA/core: introduce rdma_restrict_node_type()
smb: client: let send_done handle a completion without IB_SEND_SIGNALED
smb: client: let smbd_post_send_negotiate_req() use smbd_post_send()
smb: client: fix last send credit problem causing disconnects
smb: client: make use of smbdirect_socket.send_io.bcredits
smb: client: use smbdirect_send_batch processing
smb: client: introduce and use smbd_{alloc, free}_send_io()
smb: client: split out smbd_ib_post_send()
smb: client: port and use the wait_for_credits logic used by server
...
Linus Torvalds [Thu, 12 Feb 2026 16:23:53 +0000 (08:23 -0800)]
Merge tag 'nfsd-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Neil Brown and Jeff Layton contributed a dynamic thread pool sizing
mechanism for NFSD. The sunrpc layer now tracks minimum and maximum
thread counts per pool, and NFSD adjusts running thread counts based
on workload: idle threads exit after a timeout when the pool exceeds
its minimum, and new threads spawn automatically when all threads are
busy. Administrators control this behavior via the nfsdctl netlink
interface.
Rick Macklem, FreeBSD NFS maintainer, generously contributed server-
side support for the POSIX ACL extension to NFSv4, as specified in
draft-ietf-nfsv4-posix-acls. This extension allows NFSv4 clients to
get and set POSIX access and default ACLs using native NFSv4
operations, eliminating the need for sideband protocols. The feature
is gated by a Kconfig option since the IETF draft has not yet been
ratified.
Chuck Lever delivered numerous improvements to the xdrgen tool. Error
reporting now covers parsing, AST transformation, and invalid
declarations. Generated enum decoders validate incoming values against
valid enumerator lists. New features include pass-through line support
for embedding C directives in XDR specifications, 16-bit integer
types, and program number definitions. Several code generation issues
were also addressed.
When an administrator revokes NFSv4 state for a filesystem via the
unlock_fs interface, ongoing async COPY operations referencing that
filesystem are now cancelled, with CB_OFFLOAD callbacks notifying
affected clients.
The remaining patches in this pull request are clean-ups and minor
optimizations. Sincere thanks to all contributors, reviewers, testers,
and bug reporters who participated in the v7.0 NFSD development cycle"
* tag 'nfsd-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits)
NFSD: Add POSIX ACL file attributes to SUPPATTR bitmasks
NFSD: Add POSIX draft ACL support to the NFSv4 SETATTR operation
NFSD: Add support for POSIX draft ACLs for file creation
NFSD: Add support for XDR decoding POSIX draft ACLs
NFSD: Refactor nfsd_setattr()'s ACL error reporting
NFSD: Do not allow NFSv4 (N)VERIFY to check POSIX ACL attributes
NFSD: Add nfsd4_encode_fattr4_posix_access_acl
NFSD: Add nfsd4_encode_fattr4_posix_default_acl
NFSD: Add nfsd4_encode_fattr4_acl_trueform_scope
NFSD: Add nfsd4_encode_fattr4_acl_trueform
Add RPC language definition of NFSv4 POSIX ACL extension
NFSD: Add a Kconfig setting to enable support for NFSv4 POSIX ACLs
xdrgen: Implement pass-through lines in specifications
nfsd: cancel async COPY operations when admin revokes filesystem state
nfsd: add controls to set the minimum number of threads per pool
nfsd: adjust number of running nfsd threads based on activity
sunrpc: allow svc_recv() to return -ETIMEDOUT and -EBUSY
sunrpc: split new thread creation into a separate function
sunrpc: introduce the concept of a minimum number of threads per pool
sunrpc: track the max number of requested threads in a pool
...
Linus Torvalds [Thu, 12 Feb 2026 03:31:52 +0000 (19:31 -0800)]
Merge tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- A significant effort all around the stack to guide the compiler to
make the right choice when inlining code, to avoid unneeded calls
for small helper and stack canary overhead in the fast-path.
This generates better and faster code with very small or no text
size increases, as in many cases the call generated more code than
the actual inlined helper.
- Extend AccECN implementation so that is now functionally complete,
also allow the user-space enabling it on a per network namespace
basis.
- Add support for memory providers with large (above 4K) rx buffer.
Paired with hw-gro, larger rx buffer sizes reduce the number of
buffers traversing the stack, dincreasing single stream CPU usage
by up to ~30%.
- Do not add HBH header to Big TCP GSO packets. This simplifies the
RX path, the TX path and the NIC drivers, and is possible because
user-space taps can now interpret correctly such packets without
the HBH hint.
- Allow IPv6 routes to be configured with a gateway address that is
resolved out of a different interface than the one specified,
aligning IPv6 to IPv4 behavior.
- Multi-queue aware sch_cake. This makes it possible to scale the
rate shaper of sch_cake across multiple CPUs, while still enforcing
a single global rate on the interface.
- Add support for the nbcon (new buffer console) infrastructure to
netconsole, enabling lock-free, priority-based console operations
that are safer in crash scenarios.
- Improve the TCP ipv6 output path to cache the flow information,
saving cpu cycles, reducing cache line misses and stack use.
- Improve netfilter packet tracker to resolve clashes for most
protocols, avoiding unneeded drops on rare occasions.
- Add IP6IP6 tunneling acceleration to the flowtable infrastructure.
- Reduce tcp socket size by one cache line.
- Notify neighbour changes atomically, avoiding inconsistencies
between the notification sequence and the actual states sequence.
- Add vsock namespace support, allowing complete isolation of vsocks
across different network namespaces.
- Improve xsk generic performances with cache-alignment-oriented
optimizations.
- Support netconsole automatic target recovery, allowing netconsole
to reestablish targets when underlying low-level interface comes
back online.
Driver API:
- Support for switching the working mode (automatic vs manual) of a
DPLL device via netlink.
- Introduce PHY ports representation to expose multiple front-facing
media ports over a single MAC.
- Introduce "rx-polarity" and "tx-polarity" device tree properties,
to generalize polarity inversion requirements for differential
signaling.
- Add helper to create, prepare and enable managed clocks.
- Add ethernet driver for MaxLinear MxL862xx switches
- Remove parallel-port Ethernet driver.
- Convert existing driver timestamp configuration reporting to
hwtstamp_get and remove legacy ioctl().
- Convert existing drivers to .get_rx_ring_count(), simplifing the RX
ring count retrieval. Also remove the legacy fallback path.
- Ethernet high-speed NICs:
- Broadcom (bnxt, bng):
- bnxt: add FW interface update to support FEC stats histogram
and NVRAM defragmentation
- bng: add TSO and H/W GRO support
- nVidia/Mellanox (mlx5):
- improve latency of channel restart operations, reducing the
used H/W resources
- add TSO support for UDP over GRE over VLAN
- add flow counters support for hardware steering (HWS) rules
- use a static memory area to store headers for H/W GRO,
leading to 12% RX tput improvement
- Intel (100G, ice, idpf):
- ice: reorganizes layout of Tx and Rx rings for cacheline
locality and utilizes __cacheline_group* macros on the new
layouts
- ice: introduces Synchronous Ethernet (SyncE) support
- Meta (fbnic):
- adds debugfs for firmware mailbox and tx/rx rings vectors
- Ethernet virtual:
- geneve: introduce GRO/GSO support for double UDP encapsulation
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- some code refactoring and cleanups
- RealTek (r8169):
- add support for RTL8127ATF (10G Fiber SFP)
- add dash and LTR support
- Airoha:
- AN8811HB 2.5 Gbps phy support
- Freescale (fec):
- add XDP zero-copy support
- Thunderbolt:
- add get link setting support to allow bonding
- Renesas:
- add support for RZ/G3L GBETH SoC
- Ethernet switches:
- Maxlinear:
- support R(G)MII slow rate configuration
- add support for Intel GSW150
- Motorcomm (yt921x):
- add DCB/QoS support
- TI:
- icssm-prueth: support bridging (STP/RSTP) via the switchdev
framework
- Ethernet PHYs:
- Realtek:
- enable SGMII and 2500Base-X in-band auto-negotiation
- simplify and reunify C22/C45 drivers
- Micrel: convert bindings to DT schema
- CAN:
- move skb headroom content into skb extensions, making CAN
metadata access more robust
- CAN drivers:
- rcar_canfd:
- add support for FD-only mode
- add support for the RZ/T2H SoC
- sja1000: cleanup the CAN state handling
- WiFi:
- implement EPPKE/802.1X over auth frames support
- split up drop reasons better, removing generic RX_DROP
- additional FTM capabilities: 6 GHz support, supported number of
spatial streams and supported number of LTF repetitions
- better mac80211 iterators to enumerate resources
- initial UHR (Wi-Fi 8) support for cfg80211/mac80211
- WiFi drivers:
- Qualcomm/Atheros:
- ath11k: support for Channel Frequency Response measurement
- ath12k: a significant driver refactor to support multi-wiphy
devices and and pave the way for future device support in the
same driver (rather than splitting to ath13k)
- ath12k: support for the QCC2072 chipset
- Intel:
- iwlwifi: partial Neighbor Awareness Networking (NAN) support
- iwlwifi: initial support for U-NII-9 and IEEE 802.11bn
- RealTek (rtw89):
- preparations for RTL8922DE support
- Bluetooth:
- implement setsockopt(BT_PHY) to set the connection packet type/PHY
- set link_policy on incoming ACL connections
- Bluetooth drivers:
- btusb: add support for MediaTek7920, Realtek RTL8761BU and 8851BE
- btqca: add WCN6855 firmware priority selection feature"
* tag 'net-next-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1254 commits)
bnge/bng_re: Add a new HSI
net: macb: Fix tx/rx malfunction after phy link down and up
af_unix: Fix memleak of newsk in unix_stream_connect().
net: ti: icssg-prueth: Add optional dependency on HSR
net: dsa: add basic initial driver for MxL862xx switches
net: mdio: add unlocked mdiodev C45 bus accessors
net: dsa: add tag format for MxL862xx switches
dt-bindings: net: dsa: add MaxLinear MxL862xx
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
octeontx2-pf: Unregister devlink on probe failure
net: renesas: rswitch: fix forwarding offload statemachine
ionic: Rate limit unknown xcvr type messages
tcp: inet6_csk_xmit() optimization
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_syn_recv_sock()
tcp: populate inet->cork.fl.u.ip6 in tcp_v6_connect()
ipv6: inet6_csk_xmit() and inet6_csk_update_pmtu() use inet->cork.fl.u.ip6
ipv6: use inet->cork.fl.u.ip6 and np->final in ip6_datagram_dst_update()
ipv6: use np->final in inet6_sk_rebuild_header()
ipv6: add daddr/final storage in struct ipv6_pinfo
net: stmmac: qcom-ethqos: fix qcom_ethqos_serdes_powerup()
...
Haoyang LIU [Tue, 10 Feb 2026 15:39:02 +0000 (23:39 +0800)]
tracing: Fix indentation of return statement in print_trace_fmt()
The return statement inside the nested if block in print_trace_fmt()
is not properly indented, making the code structure unclear. This was
flagged by smatch as a warning.
Add proper indentation to the return statement to match the kernel
coding style and improve readability.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://patch.msgid.link/20260210153903.8041-1-tttturtleruss@gmail.com Signed-off-by: Haoyang LIU <tttturtleruss@gmail.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
- Add bindings for Freescale AVIC, Realtek RTD1xxx system
controllers, Microchip 25AA010A EEPROM, OnSemi FIN3385, IEI
WT61P803 PUZZLE, Delta Electronics DPS-800-AB power supply,
Infineon IR35221 Digital Multi-phase Controller, Infineon PXE1610
Digital Dual Output 6+1 VR12.5 & VR13 CPU Controller,
socionext,uniphier-smpctrl, and xlnx,zynqmp-firmware
- Lots of trivial binding fixes to address warnings in DTS files.
These are mostly for arm64 platforms which is getting closer to be
warning free. Some public shaming has helped.
- Fix I2C bus node names in examples
- Drop obsolete brcm,vulcan-soc binding
- Drop unreferenced binding headers"
* tag 'devicetree-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (60 commits)
dt-bindings: interrupt-controller: Add compatiblie string fsl,imx(1|25|27|31|35)-avic
dt-bindings: soc: imx: add fsl,aips and fsl,emi compatible strings
dt-bindings: display: bridge: lt8912b: Drop reset gpio requirement
dt-bindings: firmware: fsl,scu: Mark multi-channel MU layouts as deprecated
cpufreq: s5pv210: Simplify with scoped for each OF child loop
dmaengine: fsl_raid: Simplify with scoped for each OF child loop
clk: imx: imx31: Simplify with scoped for each OF child loop
clk: imx: imx27: Simplify with scoped for each OF child loop
cdx: Use mutex guard to simplify error handling
cdx: Simplify with scoped for each OF child loop
powerpc/wii: Simplify with scoped for each OF child loop
powerpc/fsp2: Simplify with scoped for each OF child loop
ARM: exynos: Simplify with scoped for each OF child loop
ARM: at91: Simplify with scoped for each OF child loop
of: Add for_each_compatible_node_scoped() helper
dt-bindings: Fix emails with spaces or missing brackets
scripts/dtc: Update to upstream version v1.7.2-62-ga26ef6400bd8
dt-bindings: crypto: inside-secure,safexcel: Mandate only ring IRQs
dt-bindings: crypto: inside-secure,safexcel: Add SoC compatibles
of: reserved_mem: Fix placement of __free() annotation
...
Linus Torvalds [Thu, 12 Feb 2026 01:43:59 +0000 (17:43 -0800)]
Merge tag 'driver-core-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Bus:
- Ensure bus->match() is consistently called with the device lock
held
- Improve type safety of bus_find_device_by_acpi_dev()
Devtmpfs:
- Parse 'devtmpfs.mount=' boot parameter with kstrtoint() instead of
simple_strtoul()
- Avoid sparse warning by making devtmpfs_context_ops static
IOMMU:
- Do not register the qcom_smmu_tbu_driver in arm_smmu_device_probe()
MAINTAINERS:
- Add the new driver-core mailing list (driver-core@lists.linux.dev)
to all relevant entries
- Add missing tree location for "FIRMWARE LOADER (request_firmware)"
- Add driver-model documentation to the "DRIVER CORE" entry
- Add missing driver-core maintainers to the "AUXILIARY BUS" entry
Misc:
- Change return type of attribute_container_register() to void; it
has always been infallible
- Do not export sysfs_change_owner(), sysfs_file_change_owner() and
device_change_owner()
- Move devres_for_each_res() from the public devres header to
drivers/base/base.h
- Do not use a static struct device for the faux bus; allocate it
dynamically
Revocable:
- Patches for the revocable synchronization primitive have been
scheduled for v7.0-rc1, but have been reverted as they need some
more refinement
Rust:
- Device:
- Support dev_printk on all device types, not just the core Device
struct; remove now-redundant .as_ref() calls in dev_* print
calls
- Devres:
- Introduce an internal reference count in Devres<T> to avoid a
deadlock condition in case of (indirect) nesting
- DMA:
- Allow drivers to tune the maximum DMA segment size via
dma_set_max_seg_size()
- I/O:
- Introduce the concept of generic I/O backends to handle
different kinds of device shared memory through a common
interface.
This enables higher-level concepts such as register
abstractions, I/O slices, and field projections to be built
generically on top.
In a first step, introduce the Io, IoCapable<T>, and IoKnownSize
trait hierarchy for sharing a common interface supporting offset
validation and bound-checking logic between I/O backends.
- Refactor MMIO to use the common I/O backend infrastructure
- Misc:
- Add __rust_helper annotations to C helpers for inlining into
Rust code
- Use "kernel vertical" style for imports
- Replace kernel::c_str! with C string literals
- Update ARef imports to use sync::aref
- Use pin_init::zeroed() for struct auxiliary_device_id and
debugfs file_operations initialization
- Use LKMM atomic types in debugfs doc-tests
- Various minor comment and documentation fixes
- PCI:
- Implement PCI configuration space accessors using the common I/O
backend infrastructure
- Document pci::Bar device endianness assumptions
- SoC:
- Abstractions for struct soc_device and struct soc_device_attribute
- Sample driver for soc::Device"
* tag 'driver-core-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (79 commits)
rust: devres: fix race condition due to nesting
rust: dma: add missing __rust_helper annotations
samples: rust: pci: Remove some additional `.as_ref()` for `dev_*` print
Revert "revocable: Revocable resource management"
Revert "revocable: Add Kunit test cases"
Revert "selftests: revocable: Add kselftest cases"
driver core: remove device_change_owner() export
sysfs: remove exports of sysfs_*change_owner()
driver core: disable revocable code from build
revocable: Add KUnit test for concurrent access
revocable: fix SRCU index corruption by requiring caller-provided storage
revocable: Add KUnit test for provider lifetime races
revocable: Fix races in revocable_alloc() using RCU
driver core: fix inverted "locked" suffix of driver_match_device()
rust: io: move MIN_SIZE and io_addr_assert to IoKnownSize
rust: pci: re-export ConfigSpace
rust: dma: allow drivers to tune max segment size
gpu: tyr: remove redundant `.as_ref()` for `dev_*` print
rust: auxiliary: use `pin_init::zeroed()` for device ID
rust: debugfs: use pin_init::zeroed() for file_operations
...
Linus Torvalds [Thu, 12 Feb 2026 01:20:38 +0000 (17:20 -0800)]
Merge tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
* tag 'for-7.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
dm mpath: make pg_init_delay_msecs settable
Revert "dm: fix a race condition in retrieve_deps"
dm mpath: Add missing dm_put_device when failing to get scsi dh name
dm vdo encodings: clean up header and version functions
dm: use bio_clone_blkg_association
dm: fix excessive blk-crypto operations for invalid keys
dm-verity: fix section mismatch error
dm-unstripe: fix mapping bug when there are multiple targets in a table
dm-integrity: fix recalculation in bitmap mode
dm-bufio: avoid redundant buffer_tree lookups
dm-bufio: merge cache_put() into cache_put_and_wake()
selftests: add dm-verity keyring selftests
dm-verity: add dm-verity keyring
dm: clear cloned request bio pointer when last clone bio completes
dm-verity: fix up various workqueue-related comments
dm-verity: switch to bio_advance_iter_single()
dm-verity: consolidate the BH and normal work structs
dm: add WQ_PERCPU to alloc_workqueue users
dm-integrity: fix a typo in the code for write/discard race
dm: use READ_ONCE in dm_blk_report_zones
...
Linus Torvalds [Thu, 12 Feb 2026 00:36:08 +0000 (16:36 -0800)]
Merge tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core changes:
- Rust bindings for IO-pgtable code
- IOMMU page allocation debugging support
- Disable ATS during PCI resets
Intel VT-d changes:
- Skip dev-iotlb flush for inaccessible PCIe device
- Flush cache for PASID table before using it
- Use right invalidation method for SVA and NESTED domains
- Ensure atomicity in context and PASID entry updates
AMD-Vi changes:
- Support for nested translations
- Other minor improvements
ARM-SMMU-v2 changes:
- Configure SoC-specific prefetcher settings for Qualcomm's "MDSS"
ARM-SMMU-v3 changes:
- Improve CMDQ locking fairness for pathetically small queue sizes
- Remove tracking of the IAS as this is only relevant for AArch32 and
was causing C_BAD_STE errors
- Add device-tree support for NVIDIA's CMDQV extension
- Allow some hitless transitions for the 'MEV' and 'EATS' STE fields
- Don't disable ATS for nested S1-bypass nested domains
- Additions to the kunit selftests"
* tag 'iommu-updates-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (54 commits)
iommupt: Always add IOVA range to iotlb_gather in gather_range_pages()
iommu/amd: serialize sequence allocation under concurrent TLB invalidations
iommu/amd: Fix type of type parameter to amd_iommufd_hw_info()
iommu/arm-smmu-v3: Do not set disable_ats unless vSTE is Translate
iommu/arm-smmu-v3-test: Add nested s1bypass/s1dssbypass coverage
iommu/arm-smmu-v3: Mark EATS_TRANS safe when computing the update sequence
iommu/arm-smmu-v3: Mark STE MEV safe when computing the update sequence
iommu/arm-smmu-v3: Add update_safe bits to fix STE update sequence
iommu/arm-smmu-v3: Add device-tree support for CMDQV driver
iommu/tegra241-cmdqv: Decouple driver from ACPI
iommu/arm-smmu-qcom: Restore ACTLR settings for MDSS on sa8775p
iommu/vt-d: Fix race condition during PASID entry replacement
iommu/vt-d: Clear Present bit before tearing down context entry
iommu/vt-d: Clear Present bit before tearing down PASID entry
iommu/vt-d: Flush piotlb for SVM and Nested domain
iommu/vt-d: Flush cache for PASID table before using it
iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode
iommu/vt-d: Skip dev-iotlb flush for inaccessible PCIe device without scalable mode
rust: iommu: fix `srctree` link warning
rust: iommu: fix Rust formatting
...
Linus Torvalds [Wed, 11 Feb 2026 23:57:08 +0000 (15:57 -0800)]
Merge tag 'landlock-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
- extend Landlock to enforce restrictions on a whole process, similarly
to the seccomp's TSYNC flag
- refactor data structures to simplify code and improve performance
- add documentation to cover missing parts
* tag 'landlock-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
mailmap: Add entry for Mickaël Salaün
landlock: Transpose the layer masks data structure
landlock: Add access_mask_subset() helper
selftests/landlock: Add filesystem access benchmark
landlock: Document audit blocker field format
landlock: Add errata documentation section
landlock: Add backwards compatibility for restrict flags
landlock: Refactor TCP socket type check
landlock: Minor reword of docs for TCP access rights
landlock: Document LANDLOCK_RESTRICT_SELF_TSYNC
selftests/landlock: Add LANDLOCK_RESTRICT_SELF_TSYNC tests
landlock: Multithreading support for landlock_restrict_self()
Linus Torvalds [Wed, 11 Feb 2026 23:53:00 +0000 (15:53 -0800)]
Merge tag 'integrity-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Just two bug fixes: IMA's detecting scripts (bprm_creds_for_exec), and
calculating the EVM HMAC"
* tag 'integrity-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
evm: Use ordered xattrs list to calculate HMAC in evm_init_hmac()
ima: Fix stack-out-of-bounds in is_bprm_creds_for_exec()
Linus Torvalds [Wed, 11 Feb 2026 23:47:37 +0000 (15:47 -0800)]
Merge tag 'Smack-for-7.0' of https://github.com/cschaufler/smack-next
Pull smack updates from Casey Schaufler:
"Two improvements to the code for setting the CIPSO Domain Of
Interpretation (DOI), a seldom used feature, and a formatting change"
* tag 'Smack-for-7.0' of https://github.com/cschaufler/smack-next:
smack: /smack/doi: accept previously used values
smack: /smack/doi must be > 0
security: smack: fix indentation in smack_access.c
Linus Torvalds [Wed, 11 Feb 2026 22:36:47 +0000 (14:36 -0800)]
Merge tag 'printk-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Check all mandatory callbacks when registering nbcon consoles
- Fix some compiler warnings
* tag 'printk-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
vsnprintf: drop __printf() attributes on binary printing functions
printf: convert test_hashed into macro
printk: nbcon: Check for device_{lock,unlock} callbacks
Linus Torvalds [Wed, 11 Feb 2026 22:12:50 +0000 (14:12 -0800)]
Merge tag 'slab-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- The percpu sheaves caching layer was introduced as opt-in in 6.18 and
now we enable it for all caches and remove the previous cpu (partial)
slab caching mechanism.
Besides the lower locking overhead and much more likely fastpath when
freeing, this removes the rather complicated code related to the cpu
slab lockless fastpaths (using this_cpu_try_cmpxchg128/64) and all
its complications for PREEMPT_RT or kmalloc_nolock().
The lockless slab freelist+counters update operation using
try_cmpxchg128/64 remains and is crucial for freeing remote NUMA
objects, and to allow flushing objects from sheaves to slabs mostly
without the node list_lock (Vlastimil Babka)
- Eliminate slabobj_ext metadata overhead when possible. Instead of
using kmalloc() to allocate the array for memcg and/or allocation
profiling tag pointers, use leftover space in a slab or per-object
padding due to alignment (Harry Yoo)
- Various followup improvements to the above (Hao Li)
* tag 'slab-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (39 commits)
slub: let need_slab_obj_exts() return false if SLAB_NO_OBJ_EXT is set
mm/slab: only allow SLAB_OBJ_EXT_IN_OBJ for unmergeable caches
mm/slab: place slabobj_ext metadata in unused space within s->size
mm/slab: move [__]ksize and slab_ksize() to mm/slub.c
mm/slab: save memory by allocating slabobj_ext array from leftover
mm/memcontrol,alloc_tag: handle slabobj_ext access under KASAN poison
mm/slab: use stride to access slabobj_ext
mm/slab: abstract slabobj_ext access via new slab_obj_ext() helper
ext4: specify the free pointer offset for ext4_inode_cache
mm/slab: allow specifying free pointer offset when using constructor
mm/slab: use unsigned long for orig_size to ensure proper metadata align
slub: clarify object field layout comments
mm/slab: avoid allocating slabobj_ext array from its own slab
slub: avoid list_lock contention from __refill_objects_any()
mm/slub: cleanup and repurpose some stat items
mm/slub: remove DEACTIVATE_TO_* stat items
slab: remove frozen slab checks from __slab_free()
slab: update overview comments
slab: refill sheaves from all nodes
slab: remove unused PREEMPT_RT specific macros
...
Linus Torvalds [Wed, 11 Feb 2026 21:40:35 +0000 (13:40 -0800)]
Merge tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nathan Chancellor:
"Kbuild:
- Drop '*_probe' pattern from modpost section check allowlist, which
hid legitimate warnings (Johan Hovold)
- Disable -Wtype-limits altogether, instead of enabling at W=2
(Vincent Mailhol)
- Improve UAPI testing to skip testing headers that require a libc
when CONFIG_CC_CAN_LINK is not set, opening up testing of headers
with no libc dependencies to more environments (Thomas Weißschuh)
- Update gendwarfksyms documentation with required dependencies
(Jihan LIN)
- Reject invalid LLVM= values to avoid unintentionally falling back
to system toolchain (Thomas Weißschuh)
- Add a script to help run the kernel build process in a container
for consistent environments and testing (Guillaume Tucker)
- Simplify kallsyms by getting rid of the relative base (Ard
Biesheuvel)
- Performance and usability improvements to scripts/make_fit.py
(Simon Glass)
- Minor various clean ups and fixes
Kconfig:
- Move XPM icons to individual files, clearing up GTK deprecation
warnings (Rostislav Krasny)
- Support
depends on FOO if BAR
as syntactic sugar for
depends on FOO || !BAR
(Nicolas Pitre, Graham Roff)
- Refactor merge_config.sh to use awk over shell/sed/grep,
dramatically speeding up processing large number of config
fragments (Anders Roxell, Mikko Rapeli)"
* tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (39 commits)
kbuild: remove dependency of run-command on config
scripts/make_fit: Compress dtbs in parallel
scripts/make_fit: Support a few more parallel compressors
kbuild: Support a FIT_EXTRA_ARGS environment variable
scripts/make_fit: Move dtb processing into a function
scripts/make_fit: Support an initial ramdisk
scripts/make_fit: Speed up operation
rust: kconfig: Don't require RUST_IS_AVAILABLE for rustc-option
MAINTAINERS: Add scripts/install.sh into Kbuild entry
modpost: Amend ppc64 save/restfpr symnames for -Os build
MIPS: tools: relocs: Ship a definition of R_MIPS_PC32
streamline_config.pl: remove superfluous exclamation mark
kbuild: dummy-tools: Add python3
scripts: kconfig: merge_config.sh: warn on duplicate input files
scripts: kconfig: merge_config.sh: use awk in checks too
scripts: kconfig: merge_config.sh: refactor from shell/sed/grep to awk
kallsyms: Get rid of kallsyms relative base
mips: Add support for PC32 relocations in vmlinux
Documentation: dev-tools: add container.rst page
scripts: add tool to run containerized builds
...
Linus Torvalds [Wed, 11 Feb 2026 21:35:24 +0000 (13:35 -0800)]
Merge tag 'sched_ext-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Move C example schedulers back from the external scx repo to
tools/sched_ext as the authoritative source. scx_userland and
scx_pair are returning while scx_sdt (BPF arena-based task data
management) is new. These schedulers will be dropped from the
external repo.
- Improve error reporting by adding scx_bpf_error() calls when DSQ
creation fails across all in-tree schedulers
- Avoid redundant irq_work_queue() calls in destroy_dsq() by only
queueing when llist_add() indicates an empty list
- Fix flaky init_enable_count selftest by properly synchronizing
pre-forked children using a pipe instead of sleep()
* tag 'sched_ext-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
selftests/sched_ext: Fix init_enable_count flakiness
tools/sched_ext: Fix data header access during free in scx_sdt
tools/sched_ext: Add error logging for dsq creation failures in remaining schedulers
tools/sched_ext: add arena based scheduler
tools/sched_ext: add scx_pair scheduler
tools/sched_ext: add scx_userland scheduler
sched_ext: Add error logging for dsq creation failures
sched_ext: Avoid multiple irq_work_queue() calls in destroy_dsq()
Linus Torvalds [Wed, 11 Feb 2026 21:20:50 +0000 (13:20 -0800)]
Merge tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cpuset changes:
- Continue separating v1 and v2 implementations by moving more
v1-specific logic into cpuset-v1.c
- Improve partition handling. Sibling partitions are no longer
invalidated on cpuset.cpus conflict, cpuset.cpus changes no longer
fail in v2, and effective_xcpus computation is made consistent
- Fix partition effective CPUs overlap that caused a warning on
cpuset removal when sibling partitions shared CPUs
- Increase the maximum cgroup subsystem count from 16 to 32 to
accommodate future subsystem additions
- Misc cleanups and selftest improvements including switching to
css_is_online() helper, removing dead code and stale documentation
references, using lockdep_assert_cpuset_lock_held() consistently, and
adding polling helpers for asynchronously updated cgroup statistics
* tag 'cgroup-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: fix overlap of partition effective CPUs
cgroup: increase maximum subsystem count from 16 to 32
cgroup: Remove stale cpu.rt.max reference from documentation
cpuset: replace direct lockdep_assert_held() with lockdep_assert_cpuset_lock_held()
cgroup/cpuset: Move the v1 empty cpus/mems check to cpuset1_validate_change()
cgroup/cpuset: Don't invalidate sibling partitions on cpuset.cpus conflict
cgroup/cpuset: Don't fail cpuset.cpus change in v2
cgroup/cpuset: Consistently compute effective_xcpus in update_cpumasks_hier()
cgroup/cpuset: Streamline rm_siblings_excl_cpus()
cpuset: remove dead code in cpuset-v1.c
cpuset: remove v1-specific code from generate_sched_domains
cpuset: separate generate_sched_domains for v1 and v2
cpuset: move update_domain_attr_tree to cpuset_v1.c
cpuset: add cpuset1_init helper for v1 initialization
cpuset: add cpuset1_online_css helper for v1-specific operations
cpuset: add lockdep_assert_cpuset_lock_held helper
cpuset: Remove unnecessary checks in rebuild_sched_domains_locked
cgroup: switch to css_is_online() helper
selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants
selftests: cgroup: make test_memcg_sock robust against delayed sock stats
...
Linus Torvalds [Wed, 11 Feb 2026 21:13:32 +0000 (13:13 -0800)]
Merge tag 'wq-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue updates from Tejun Heo:
- Rework the rescuer to process work items one-by-one instead of
slurping all pending work items in a single pass.
As there is only one rescuer per workqueue, a single long-blocking
work item could cause high latency for all tasks queued behind it,
even after memory pressure is relieved and regular kworkers become
available to service them.
- Add CONFIG_BOOTPARAM_WQ_STALL_PANIC build-time option and
workqueue.panic_on_stall_time parameter for time-based stall panic,
giving systems more control over workqueue stall handling.
- Replace BUG_ON() with panic() in the stall panic path for clearer
intent and more informative output.
* tag 'wq-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: replace BUG_ON with panic in panic_on_wq_watchdog
workqueue: add time-based panic for stalls
workqueue: add CONFIG_BOOTPARAM_WQ_STALL_PANIC option
workqueue: Process extra works in rescuer on memory pressure
workqueue: Process rescuer work items one-by-one using a cursor
workqueue: Make send_mayday() take a PWQ argument directly
Thomas Gleixner [Tue, 10 Feb 2026 16:20:51 +0000 (17:20 +0100)]
sched/mmcid: Don't assume CID is CPU owned on mode switch
Shinichiro reported a KASAN UAF, which is actually an out of bounds access
in the MMCID management code.
CPU0 CPU1
T1 runs in userspace
T0: fork(T4) -> Switch to per CPU CID mode
fixup() set MM_CID_TRANSIT on T1/CPU1
T4 exit()
T3 exit()
T2 exit()
T1 exit() switch to per task mode
---> Out of bounds access.
As T1 has not scheduled after T0 set the TRANSIT bit, it exits with the
TRANSIT bit set. sched_mm_cid_remove_user() clears the TRANSIT bit in
the task and drops the CID, but it does not touch the per CPU storage.
That's functionally correct because a CID is only owned by the CPU when
the ONCPU bit is set, which is mutually exclusive with the TRANSIT flag.
Now sched_mm_cid_exit() assumes that the CID is CPU owned because the
prior mode was per CPU. It invokes mm_drop_cid_on_cpu() which clears the
not set ONCPU bit and then invokes clear_bit() with an insanely large
bit number because TRANSIT is set (bit 29).
Prevent that by actually validating that the CID is CPU owned in
mm_drop_cid_on_cpu().
Fixes: 007d84287c74 ("sched/mmcid: Drop per CPU CID immediately when switching to per task mode") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Cc: stable@vger.kernel.org Closes: https://lore.kernel.org/aYsZrixn9b6s_2zL@shinmob Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 11 Feb 2026 20:55:44 +0000 (12:55 -0800)]
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
Linus Torvalds [Wed, 11 Feb 2026 20:20:25 +0000 (12:20 -0800)]
Merge tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Add support for GMSL1 and GMSL‑coax modules (PCI mgb4)
- Add driver for TI VIP
- AV1 – first kernel support (pixel‑format, decoder, transcoder)
- Three new camera‑sensor drivers (os05b10, s5k3m5, s5kjn1)
- Synopsys CSI‑2 receiver driver
- Verisilicon & rkvdec – major fixes and enhancements
- IPU6 (and 7) fixes and preparation for metadata
- omap3isp: v4l2-compliance updates
- Fix DVB streaming, drop wait_prepare/finish (dvb/vb2)
* tag 'media/v7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (307 commits)
media: uvcvideo: Pass allocation size directly to uvc_alloc_urb_buffer
media: uvcvideo: Fix allocation for small frame sizes
media: uvcvideo: Return queued buffers on start_streaming() failure
media: uvcvideo: Create an ID namespace for streaming output terminals
media: rkvdec: Add HEVC support for the VDPU383 variant
media: rkvdec: Add HEVC support for the VDPU381 variant
media: rkvdec: Add H264 support for the VDPU383 variant
media: rkvdec: Add H264 support for the VDPU381 variant
media: rkvdec: Disable multicore support
media: rkvdec: Enable all clocks without naming them
media: rkvdec: Support per-variant interrupt handler
media: rkvdec: Add RCB and SRAM support
media: rkvdec: Add variant specific coded formats list
media: rkvdec: Move hevc functions to common file
media: rkvdec: Move h264 functions to common file
media: rkvdec: Use structs to represent the HW RPS
media: rkvdec: Move cabac tables to their own source file
media: rkvdec: Switch to using structs instead of writel
media: visl: Add HEVC short and long term RPS sets
media: v4l2-ctrls: Add hevc_ext_sps_[ls]t_rps controls
...
Linus Torvalds [Wed, 11 Feb 2026 19:43:00 +0000 (11:43 -0800)]
Merge tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
Although 1394 OHCI specification does not impose any restriction on
the memory size dedicated to these DMA contexts, 1394 OHCI PCI driver
allocates pages for convenience when mapping them into either kernel
space or userspace VMA. The driver previously used dma_alloc_pages()
for both page allocation and mapping creation, even though this
kernel API is rarely used. Following discussions questioning the
page-oriented kernel API in the DMA layer, the driver has been
refactored to avoid using this API. In addition, the use of private
members in the allocated pages has been removed following
long-standing concern.
- Allocate variable-sized buffer for isochronous context header
1394 OHCI PCI driver previously allocated a single page for
isochronous context header. As a result, the buffer size for the
header was fixed to PAGE_SIZE, which imposed a limitation on IEC
61883-1/6 packet streaming engine. Consequently, the ALSA PCM devices
provided by drivers for audio and music units in IEEE 1394 bus were
constrained in the maximum size of buffer period (64 ms in most
cases). This limitation is resolved by dynamically allocating the
header buffer with an arbitrary size.
* tag 'firewire-updates-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
ALSA: firewire: remove PCM buffer size constraint from isoc context header
firewire: core: add fw_iso_context_create() variant with header storage size
firewire: core: provide isoc header buffer size outside card driver
firewire: ohci: allocate isoc context header by kvmalloc()
firewire: core: add flags member for isochronous context structure
firewire: ohci: use cleanup helper for isoc context header allocation
firewire: ohci: code refactoring to use union for isoc multiple channel state
firewire: ohci: refactor isoc single-channel state using a union
firewire: core: add function variants for isochronous context creation
firewire: ohci: fix index of pages for dma address to 1394 OHCI IT context
firewire: ohci: stop using page private to store DMA mapping address
firewire: ohci: split page allocation from dma mapping
firewire: ohci: use MAX macro to guarantee minimum count of pages for AR contexts
firewire: core: stop using page private to store DMA mapping address
firewire: core: use common kernel API to allocate and release a batch of pages
firewire: core: code refactoring with cleanup function for isoc pages
firewire: core: use mutex instead of spinlock for client isochronous context
firewire: core: move private function declaration from public header to internal header
Linus Torvalds [Wed, 11 Feb 2026 19:28:10 +0000 (11:28 -0800)]
Merge tag 'hid-for-linus-2026020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- global switch of HID drivers to use pm_*ptr instead of #ifdef
CONFIG_PM* (Bastien Nocera)
- support for new firmware handling in intel-ish-hid (Vishnu Sankar)
- support for HID output reports in the Quicki2c in intel-thc (Even Xu)
- solidify register configuration updates in intel-thc (Even Xu)
- Support for Rock band 4 PS4 and PS5 guitars (Rosalie Wanders)
- fn lock and WMI fan control handling improvements in certain Asus
models (ROG, ProArt P16) (Ionut Nechita, Connor Belli)
- fix for potential NULL pointer dereference during warm reset in
intel-ish-hid (Ryan Lin)
- fix for potential NULL pointer derefence in probe error paths in
hid-pl (Oliver Neukum)
- various other small assorted fixes and new device ID additions /
device-specific quirks
* tag 'hid-for-linus-2026020901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (41 commits)
HID: sony: add dongle device IDs for CRKD Gibson SG
HID: Intel-thc-hid: Intel-thc: Fix wrong register fields updating
HID: intel-ish-hid: fix NULL-ptr-deref in ishtp_bus_remove_all_clients
HID: logitech-hidpp: Add support for Logitech K980
HID: logitech-dj: Differentiate "invalid device index" error
HID: sony: Use pm_ptr instead of #ifdef CONFIG_PM
HID: wacom: Use pm_ptr instead of #ifdef CONFIG_PM
HID: uclogic: Use pm_ptr instead of #ifdef CONFIG_PM
HID: hid-sensor-hub: Use pm_ptr instead of #ifdef CONFIG_PM
HID: picolcd_core: Use pm_ptr instead of #ifdef CONFIG_PM
HID: nintendo: Use pm_ptr instead of #ifdef CONFIG_PM
HID: logitech-dj: Use pm_ptr instead of #ifdef CONFIG_PM
HID: lenovo: Use pm_ptr instead of #ifdef CONFIG_PM
HID: asus: Use pm_ptr instead of #ifdef CONFIG_PM
HID: appletb-kbd: Use pm_ptr instead of #ifdef CONFIG_PM
HID: hid-alps: Use pm_ptr instead of #ifdef CONFIG_PM
HID: multitouch: add eGalaxTouch EXC3188 support
HID: elecom: Add support for ELECOM HUGE Plus M-HT1MRBK
HID: sony: add support for bluetooth Rock Band 4 PS4 guitars
HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()
...
Linus Torvalds [Wed, 11 Feb 2026 19:00:19 +0000 (11:00 -0800)]
Merge tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New PMBus drivers:
- HiTRON HAC300S power supply
- Monolithic MP5926 Hot-Swap Controller
- STEF48H28 hot-swap controller
Support for new chips in existing drivers
- Support for Pro WS TRX50-SAGE WIFI A and ROG MAXIMUS X HERO
(asus-ec-sensors)
- Support for Dell OptiPlex 7080 (dell-smm)
- Support for F81968 (f71882fg)
- Support for Micro PC 2 (gpd-fan)
- New customer ID for ASRock Z590 Taichi (nct6683)
- Support for ASUS Pro WS WRX90E-SAGE SE (nct6775)
- Support for SHT85 (sht3x)
- Support for P3T1035 and P3T2030 (tmp108)
Bug fixes:
- Revert "fix" for UAF which didn't fix a UAF but introduced a race
condition resulting in a NULL pointer crash (ibmpex)
- Fix failure to instantiate driver if the chip is configured for VID
mode (pmbus/mpq8785)
- Use READ/WRITE_ONCE to avoid compiler optimization induced race
(max16065)
- Resource leak fixes (nct7363, emc2305)
Other notable changes:
- Support for temperature limit thresholds (cros_ec)
- Add TjMax for Silvermont through Tremont Atoms (coretemp)
Various other minor improvements"
* tag 'hwmon-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (42 commits)
hwmon: (pmbus/mpq8785) fix VOUT_MODE mismatch during identification
Revert "hwmon: (ibmpex) fix use-after-free in high/low store"
hwmon: (max16065) Use READ/WRITE_ONCE to avoid compiler optimization induced race
hwmon: (nct6775) use sysfs_emit instead of sprintf
hwmon: pmbus: fix table in STEF48H28 documentation
hwmon: Add support for HiTRON HAC300S PSU
dt-bindings: trivial-devices: Add hitron,hac300s
hwmon: (cros_ec) Add support for temperature thresholds
hwmon: (cros_ec) Move temperature channel params to a macro
hwmon: (cros_ec) Add support for fan target speed
hwmon: (cros_ec) Split up supported features in the documentation
hwmon: (tmp108) Add P3T1035 and P3T2030 support
hwmon: (tmp108) Add support for P3T1035 and P3T2030
dt-bindings: hwmon: ti,tmp108: Add P3T1035,P3T2030
hwmon: pmbus: add support for STEF48H28
dt-bindings: hwmon: add STEF48H28
hwmon: (nct7363) Fix a resource leak in nct7363_present_pwm_fanin
hwmon: (emc2305) Fix a resource leak in emc2305_of_parse_pwm_child
hwmon: (gpd-fan) add support for Micro PC 2
hwmon: (coretemp) Add TjMax for Silvermont through Tremont Atoms
...
Linus Torvalds [Wed, 11 Feb 2026 18:53:39 +0000 (10:53 -0800)]
Merge tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and some changes to GPIO core but mostly
just GPIO driver updates across a wide array of files, adding support
for new models as well as various refactoring changes. Nothing
controversial and everything has spent a good measure of time in
linux-next.
GPIOLIB core:
- shrink the GPIO bus driver stub code
- rework software node support for "undefined" software nodes
- provide and use devm_fwnode_gpiod_get_optional()
- only compile the OF quirk for MT2701 when needed
New drivers:
- add the GPIO driver for ROHM bd72720
- add the gpio-line-mux driver providing 1-to-many mapping for a
single real GPIO
Driver changes:
- refactor gpio-pca9570: use lock guard, add missing headers, use
devres consistently
- add support for a new model (G7 Aspeed sgpiom) to the aspeed-sgpio
driver along with some prerequisite refactoring
- use device_get_match_data() where applicable and save some lines
- add support for more models to gpio-cadence
- add the compatible property to reset-gpio and use it in shared GPIO
management
- drop unnecessary use of irqd_get_trigger_type() in gpio-max77759
- add support for a new variant to gpio-pca953x
- extend build coverage with COMPILE_TEST for more drivers
- constify configfs structures in gpio-sim and gpio-virtuser
- add support for the K3 SoC to gpio-spacemit
- implement the missing .get_direction() callback in gpio-max77620
- add support for Tegra264 to gpio-tegra186
- drop unneeded MODULE_ALIAS() from gpio-menz127
DT bindings:
- document support for the opencores GPIO controller in gpio-mmio
- document new variants for gpio-pca953x
Documentation:
- extensively describe interrupt source detection for gpio-pca953x
and add more models to the list of supported variants"
* tag 'gpio-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (59 commits)
gpio: tegra186: Add support for Tegra264
dt-bindings: gpio: Add Tegra264 support
gpio: spacemit-k1: Use PDR for pin direction, not SDR/CDR
gpio: max77620: Implement .get_direction() callback
gpio: aspeed-sgpio: Support G7 Aspeed sgpiom controller
dt-bindings: gpio: aspeed,sgpio: Support ast2700
gpio: aspeed-sgpio: Convert IRQ functions to use llops callbacks
gpio: aspeed-sgpio: Create llops to handle hardware access
gpio: aspeed-sgpio: Remove unused bank name field
gpio: aspeed-sgpio: Change the macro to support deferred probe
regulator: bd71815: switch to devm_fwnode_gpiod_get_optional
gpiolib: introduce devm_fwnode_gpiod_get_optional() wrapper
gpio: mmio: Add compatible for opencores GPIO
dt-bindings: gpio-mmio: Correct opencores GPIO
gpio: pca9570: use lock guards
gpio: pca9570: Don't use "proxy" headers
gpio: pca9570: Use devm_mutex_init() for mutex initialization
MAINTAINERS: Add ROHM BD72720 PMIC
power: supply: bd71828-power: Support ROHM BD72720
power: supply: bd71828: Support wider register addresses
...
Linus Torvalds [Wed, 11 Feb 2026 18:45:11 +0000 (10:45 -0800)]
Merge tag 'pwrseq-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"One new driver and support for more models added to the existing
qcom-wcn driver as well as some minor tweaks and fixes.
New drivers:
- add the power sequencing driver for PCIe M.2 connectors
Driver improvements:
- use device_get_match_data() where applicable
- add support for the WCN39xx family of models to pwrseq-qcom-wcn
Fixes:
- fix a locking issue in pwrseq core
- fix retval check in pwrseq-qcom-wcn"
* tag 'pwrseq-updates-for-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: qcom-wcn: fix error path for VDDIO handling
power: sequencing: fix missing state_lock in pwrseq_power_on() error path
power: sequencing: Add the Power Sequencing driver for the PCIe M.2 connectors
dt-bindings: connector: Add PCIe M.2 Mechanical Key M connector
power: sequencing: qcom-wcn: add support for WCN39xx
regulator: dt-bindings: qcom,wcn3990-pmu: describe PMUs on WCN39xx
power: sequencing: qcom-wcn: use device_get_match_data()
Linus Torvalds [Wed, 11 Feb 2026 17:52:33 +0000 (09:52 -0800)]
Merge tag 'pwm/for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"There are a few patches adapting to changes in Rust land which seems
to be the norm since there is a pwm driver written in Rust. Other than
that just a few cleanups and a single fix for the tiehrpwm driver that
came in too late for making it into v6.19.
Thanks to Andy Shevchenko, Bartosz Golaszewski, Daniel Almeida and
Michal Wilczynski for reviews in this cycle, and to Alice Ryhl, Ben
Zong-You Xie, Gokul Praveen, Kari Argillander, Markus Probst, Raag
Jadav, Shankari Anand, Tamir Duberstein and Vladimir Zapolskiy for
code contributions"
* tag 'pwm/for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: Remove redundant check in pwm_ops_check()
pwm: tiehrpwm: Enable pwmchip's parent device before setting configuration
pwm: Update MAINTAINER entry
rust: pwm: Add __rust_helper to helpers
rust: pwm: Simplify to_result call sites and unsafe blocks
rust: pwm: Fix potential memory leak on init error
dt-bindings: pwm: nxp,lpc32xx-pwm: Specify clocks property as mandatory
pwm: th1520: Replace `kernel::c_str!` with C-Strings
pwm: dwc: Use size macro
pwm: Emit native configuration in /sys/kernel/debug/pwm
rust: pwm: Add UnregisteredChip wrapper around Chip
rust: pwm: Update ARef and AlwaysRefCounted imports to use sync::aref
Paolo Bonzini [Wed, 11 Feb 2026 17:52:27 +0000 (18:52 +0100)]
Merge tag 'kvm-s390-next-7.0-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- gmap rewrite: completely new memory management for kvm/s390
- vSIE improvement
- maintainership change for s390 vfio-pci
- small quality of life improvement for protected guests
Paolo Bonzini [Mon, 9 Feb 2026 18:35:16 +0000 (19:35 +0100)]
Merge tag 'kvm-x86-pmu-6.20' of https://github.com/kvm-x86/linux into HEAD
KVM mediated PMU support for 6.20
Add support for mediated PMUs, where KVM gives the guest full ownership of PMU
hardware (contexted switched around the fastpath run loop) and allows direct
access to data MSRs and PMCs (restricted by the vPMU model), but intercepts
access to control registers, e.g. to enforce event filtering and to prevent the
guest from profiling sensitive host state.
To keep overall complexity reasonable, mediated PMU usage is all or nothing
for a given instance of KVM (controlled via module param). The Mediated PMU
is disabled default, partly to maintain backwards compatilibity for existing
setup, partly because there are tradeoffs when running with a mediated PMU that
may be non-starters for some use cases, e.g. the host loses the ability to
profile guests with mediated PMUs, the fastpath run loop is also a blind spot,
entry/exit transitions are more expensive, etc.
Versus the emulated PMU, where KVM is "just another perf user", the mediated
PMU delivers more accurate profiling and monitoring (no risk of contention and
thus dropped events), with significantly less overhead (fewer exits and faster
emulation/programming of event selectors) E.g. when running Specint-2017 on
a single-socket Sapphire Rapids with 56 cores and no-SMT, and using perf from
within the guest:
Perf command:
a. basic-sampling: perf record -F 1000 -e 6-instructions -a --overwrite
b. multiplex-sampling: perf record -F 1000 -e 10-instructions -a --overwrite
Paolo Bonzini [Mon, 9 Feb 2026 18:33:30 +0000 (19:33 +0100)]
Merge tag 'kvm-x86-apic-6.20' of https://github.com/kvm-x86/linux into HEAD
KVM x86 APIC-ish changes for 6.20
- Fix a benign bug where KVM could use the wrong memslots (ignored SMM) when
creating a vCPU-specific mapping of guest memory.
- Clean up KVM's handling of marking mapped vCPU pages dirty.
- Drop a pile of *ancient* sanity checks hidden behind in KVM's unused
ASSERT() macro, most of which could be trivially triggered by the guest
and/or user, and all of which were useless.
- Fold "struct dest_map" into its sole user, "struct rtc_status", to make it
more obvious what the weird parameter is used for, and to allow burying the
RTC shenanigans behind CONFIG_KVM_IOAPIC=y.
- Bury all of ioapic.h and KVM_IRQCHIP_KERNEL behind CONFIG_KVM_IOAPIC=y.
- Add a regression test for recent APICv update fixes.
- Rework KVM's handling of VMCS updates while L2 is active to temporarily
switch to vmcs01 instead of deferring the update until the next nested
VM-Exit. The deferred updates approach directly contributed to several
bugs, was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans.
- Handle "hardware APIC ISR", a.k.a. SVI, updates in kvm_apic_update_apicv()
to consolidate the updates, and to co-locate SVI updates with the updates
for KVM's own cache of ISR information.
Paolo Bonzini [Mon, 9 Feb 2026 18:08:17 +0000 (19:08 +0100)]
Merge tag 'kvm-x86-gmem-6.20' of https://github.com/kvm-x86/linux into HEAD
KVM guest_memfd changes for 6.20
- Remove kvm_gmem_populate()'s preparation tracking and half-baked hugepage
handling, and instead rely on SNP (the only user of the tracking) to do its
own tracking via the RMP.
- Retroactively document and enforce (for SNP) that KVM_SEV_SNP_LAUNCH_UPDATE
and KVM_TDX_INIT_MEM_REGION require the source page to be 4KiB aligned, to
avoid non-trivial complexity for a non-existent usecase (and because
in-place conversion simply can't support unaligned sources).
- When populating guest_memfd memory, GUP the source page in common code and
pass the refcounted page to the vendor callback, instead of letting vendor
code do the heavy lifting. Doing so avoids a looming deadlock bug with
in-place due an AB-BA conflict betwee mmap_lock and guest_memfd's filemap
invalidate lock.
Paolo Bonzini [Mon, 9 Feb 2026 18:05:42 +0000 (19:05 +0100)]
Merge tag 'kvm-riscv-6.20-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.20
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(),
and kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Add riscv vm satp modes in KVM selftests
- Transparent huge page support for G-stage
- Adjust the number of available guest irq files based on
MMIO register sizes in DeviceTree or ACPI
Linus Torvalds [Wed, 11 Feb 2026 17:43:43 +0000 (09:43 -0800)]
Merge tag 'spi-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"The highlight here is that David Lechner has added support for
multi-lane SPI devices. Unlike the existing dual/quad SPI support this
is for devices (typically ADCs/DACs) which support multiple
independent data streams over multiple data lanes, instead of sending
one data stream N times as fast they simultaneously transfer N
different data streams.
This is very similar to the case where multiple devices are grouped
together but in this case it's a single device in a way that's visible
to software.
Otherwise there's been quite a bit of work on existing drivers, both
cleanup and feature improvement, and a reasonable collection of new
drivers.
- Support for multi-lane SPI devices
- Preparatory work for some memory mapped flash improvements that
will happen in the MTD subsystem
- Several conversions to fwnode APIs
- A bunch of cleanup and hardening work on the ST drivers
- Support for DMA mode on Renesas RZV2H and i.MX target mode
- Support for ATCSPI200, AXIADO AX300, NXP XPI and Renesas RZ/N1"
* tag 'spi-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (108 commits)
spi: tools: Add include folder to .gitignore
spi: cadence-qspi: Add support for the Renesas RZ/N1 controller
spi: cadence-qspi: Kill cqspi_jh7110_clk_init
spi: dt-bindings: cdns,qspi-nor: Add Renesas RZ/N1D400 to the list
spi: geni-qcom: Add target abort support
spi: geni-qcom: Drop unused msg parameter from timeout handlers
spi: geni-qcom: Fix abort sequence execution for serial engine errors
spi: geni-qcom: Improve target mode allocation by using proper allocation functions
spi: xilinx: use device property accessors.
dt-bindings: spi: Add binding for Faraday FTSSP010
spi: axi-spi-engine: support SPI_MULTI_LANE_MODE_STRIPE
spi: dt-bindings: adi,axi-spi-engine: add multi-lane support
spi: Documentation: add page on multi-lane support
spi: add multi_lane_mode field to struct spi_transfer
spi: support controllers with multiple data lanes
spi: dt-bindings: add spi-{tx,rx}-lane-map properties
spi: dt-bindings: change spi-{rx,tx}-bus-width to arrays
spi: dw: Remove not-going-to-be-supported code for Baikal SoC
spi: cadence-qspi: Use a default value for cdns,fifo-width
spi: cadence-qspi: Make sure write protection is disabled
...
Linus Torvalds [Wed, 11 Feb 2026 17:40:12 +0000 (09:40 -0800)]
Merge tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"There's a bunch of new drivers here, plus a lot of hardening for the
supply resolution code which allow us to support systems where we have
two PMICs each of which has regulators supplied by the other. This did
work a long time ago but got broken as part of improved integration
with the device model, it's fairly rare so nobody noticed.
- Improvements for supply handling from André Draszik to allow
systems with two PMICs with supply/consumer relationships in both
directions to instantiate.
- New drivers for Maxim MAX776750, Realtek RT8902, Samsung S2MPG11,
Texas Instuments TPS65185.
This have also pulls in some MFD updates which are build dependencies
for the Samsung S2MPG11 support"
* tag 'regulator-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (42 commits)
regulator: s2mps11: more descriptive gpio consumer name
regulator: s2mps11: add S2MPG11 regulator
regulator: s2mps11: refactor S2MPG10 regulator macros for S2MPG11 reuse
regulator: s2mps11: refactor S2MPG10 ::set_voltage_time() for S2MPG11 reuse
regulator: s2mps11: add S2MPG10 regulator
regulator: s2mps11: refactor handling of external rail control
regulator: s2mps11: update node parsing (allow -supply properties)
regulator: s2mps11: place constants on right side of comparison tests
regulator: s2mps11: use dev_err_probe() where appropriate
regulator: s2mps11: drop two needless variable initialisations
regulator: add REGULATOR_LINEAR_VRANGE macro
regulator: dt-bindings: add s2mpg11-pmic regulators
regulator: dt-bindings: add s2mpg10-pmic regulators
dt-bindings: firmware: google,gs101-acpm-ipc: convert regulators to lowercase
mfd: sec: Add support for S2MPG11 PMIC via ACPM
mfd: sec: s2mpg10: Reorder regulators for better probe performance
dt-bindings: mfd: Add samsung,s2mpg11-pmic
dt-bindings: mfd: samsung,s2mpg10-pmic: Link to its regulators
dt-bindings: mfd: samsung,s2mps11: Split s2mpg10-pmic into separate file
mfd: sec: Drop now unused struct sec_pmic_dev::irq_data
...
Linus Torvalds [Wed, 11 Feb 2026 17:23:13 +0000 (09:23 -0800)]
Merge tag 'regmap-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"The main change here is the implementation of a mechanism for
generating register defaults via a callback rather than with a table
in the driver.
This is useful for devices where there are large ranges of registers
with the same or generated values, it allows us to have a small amount
of code instead of a larger amount of default data"
* tag 'regmap-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regcache: Demote defaults readback from HW to debug print
regmap: add KUnit coverage for reg_default_cb callback
regmap: Add reg_default_cb callback for flat cache defaults
regmap: Enable REGMAP when REGMAP_SLIMBUS is enabled
Linus Torvalds [Wed, 11 Feb 2026 17:19:47 +0000 (09:19 -0800)]
Merge tag 'chrome-platform-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"New cros_ec_lightbar features:
- Report the number of exposed LED segments via sysfs
- Support large sequence of program to be transmitted
Fixes:
- Don't touch fwnode_handle::dev which is a private field
- Fix wrong assignment for response size in cros_ec_lightbar
Cleanups:
- Use acpi_get_local_u64_address() helper"
* tag 'chrome-platform-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: lightbar: Use flexible array member
platform/chrome: lightbar: Fix lightbar_program_ex alignment
platform/chrome: lightbar: Add support for large sequence
platform/chrome: lightbar: Report number of segments
platform/chrome: cros_ec_lightbar: Fix response size initialization
platform/chrome: cros_typec_switch: Use acpi_get_local_u64_address()
platform/chrome: cros_typec_switch: Don't touch struct fwnode_handle::dev
tracing: Reset last_boot_info if ring buffer is reset
Commit 32dc0042528d ("tracing: Reset last-boot buffers when reading
out all cpu buffers") resets the last_boot_info when user read out
all data via trace_pipe* files. But it is not reset when user
resets the buffer from other files. (e.g. write `trace` file)
Reset it when the corresponding ring buffer is reset too.
Vikas Gupta [Sun, 8 Feb 2026 17:29:25 +0000 (22:59 +0530)]
bnge/bng_re: Add a new HSI
The HSI is shared between the firmware and the driver and is
automatically generated.
Add a new HSI for the BNGE driver. The current HSI refers to BNXT,
which will become incompatible with ThorUltra devices as the
BNGE driver adds more features. The BNGE driver will not use the HSI
located in the bnxt folder.
Also, add an HSI for ThorUltra RoCE driver.
Changes in v3:
- Fix in bng_roce_hsi.h reported by Jakub (AI review)
https://lore.kernel.org/netdev/20260207051422.4181717-1-kuba@kernel.org/
- Add an entry in MAINTAINERS
Kevin Hao [Sun, 8 Feb 2026 08:45:52 +0000 (16:45 +0800)]
net: macb: Fix tx/rx malfunction after phy link down and up
In commit 99537d5c476c ("net: macb: Relocate mog_init_rings() callback
from macb_mac_link_up() to macb_open()"), the mog_init_rings() callback
was moved from macb_mac_link_up() to macb_open() to resolve a deadlock
issue. However, this change introduced a tx/rx malfunction following
phy link down and up events. The issue arises from a mismatch between
the software queue->tx_head, queue->tx_tail, queue->rx_prepared_head,
and queue->rx_tail values and the hardware's internal tx/rx queue
pointers.
According to the Zynq UltraScale TRM [1], when tx/rx is disabled, the
internal tx queue pointer resets to the value in the tx queue base
address register, while the internal rx queue pointer remains unchanged.
The following is quoted from the Zynq UltraScale TRM:
When transmit is disabled, with bit [3] of the network control register
set low, the transmit-buffer queue pointer resets to point to the address
indicated by the transmit-buffer queue base address register. Disabling
receive does not have the same effect on the receive-buffer queue
pointer.
Additionally, there is no need to reset the RBQP and TBQP registers in a
phy event callback. Therefore, move macb_init_buffers() to macb_open().
In a phy link up event, the only required action is to reset the tx
software head and tail pointers to align with the hardware's behavior.
Kevin Hao [Sat, 7 Feb 2026 06:21:46 +0000 (14:21 +0800)]
net: ti: icssg-prueth: Add optional dependency on HSR
Commit 95540ad6747c ("net: ti: icssg-prueth: Add support for HSR frame
forward offload") introduced support for offloading HSR frame forwarding,
which relies on functions such as is_hsr_master() provided by the HSR
module. Although HSR provides stubs for configurations with HSR
disabled, this driver still requires an optional dependency on HSR.
Otherwise, build failures will occur when icssg-prueth is built-in
while HSR is configured as a module.
ld.lld: error: undefined symbol: is_hsr_master
>>> referenced by icssg_prueth.c:710 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:710)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_del_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:681 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:681)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_add_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:1812 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:1812)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(prueth_netdevice_event) in archive vmlinux.a
ld.lld: error: undefined symbol: hsr_get_port_ndev
>>> referenced by icssg_prueth.c:712 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:712)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_del_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:712 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:712)
>>> drivers/net/etherneteth_hsr_del_mcast) in archive vmlinux.a
>>> referenced by icssg_prueth.c:683 (drivers/net/ethernet/ti/icssg/icssg_prueth.c:683)
>>> drivers/net/ethernet/ti/icssg/icssg_prueth.o:(icssg_prueth_hsr_add_mcast) in archive vmlinux.a
>>> referenced 1 more times
Fixes: 95540ad6747c ("net: ti: icssg-prueth: Add support for HSR frame forward offload") Signed-off-by: Kevin Hao <haokexin@gmail.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20260207-icssg-dep-v3-1-8c47c1937f81@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
net: dsa: initial support for MaxLinear MxL862xx switches
This series adds very basic DSA support for the MaxLinear MxL86252
(5x 2500Base-T PHYs) and MxL86282 (8x 2500Base-T PHYs) switches.
In addition to the 2.5G TP ports both switches also come with two
SerDes interfaces which can be used either to connect external PHYs
or SFP cages, or as CPU port when using the switch with this DSA driver.
MxL862xx integrates a firmware running on an embedded processor (based on
Zephyr RTOS). Host interaction uses a simple netlink-like API transported
over MDIO/MMD.
This series includes only what's needed to pass traffic between user
ports and the CPU port: relayed MDIO to internal PHYs, basic port
enable/disable, and CPU-port special tagging.
The SerDes interface of the CPU port is automatically configured by the
switch after reset using a board-specific configuration stored together
with the firmware in the flash chip attached to the switch, so no action
is needed from the driver to setup the interface mode of the CPU port.
Also MAC settings of the PHY ports are automatically configured, which
means the driver works fine with phylink_mac_ops being all no-op stubs.
Multiple follow up series will bring support for setting up the other
SerDes PCS interface (ie. not used for the CPU port), bridge, VLAN, ...
offloading, and support for using an 802.1Q-based special tag instead of
the proprietary 8-byte tag.
====================
Daniel Golle [Sat, 7 Feb 2026 03:07:27 +0000 (03:07 +0000)]
net: dsa: add basic initial driver for MxL862xx switches
Add very basic DSA driver for MaxLinear's MxL862xx switches.
In contrast to previous MaxLinear switches the MxL862xx has a built-in
processor that runs a sophisticated firmware based on Zephyr RTOS.
Interaction between the host and the switch hence is organized using a
software API of that firmware rather than accessing hardware registers
directly.
Add descriptions of the most basic firmware API calls to access the
built-in MDIO bus hosting the 2.5GE PHYs, basic port control as well as
setting up the CPU port.
Implement a very basic DSA driver using that API which is sufficient to
get packets flowing between the user ports and the CPU port.
The firmware offers all features one would expect from a modern switch
hardware, they are going to be added one by one in follow-up patch
series.
Daniel Golle [Sat, 7 Feb 2026 03:07:18 +0000 (03:07 +0000)]
net: mdio: add unlocked mdiodev C45 bus accessors
Add helper inline functions __mdiodev_c45_read() and
__mdiodev_c45_write(), which are the C45 equivalents of the existing
__mdiodev_read() and __mdiodev_write() added by commit e6a45700e7e1
("net: mdio: add unlocked mdiobus and mdiodev bus accessors")
Daniel Golle [Sat, 7 Feb 2026 03:07:11 +0000 (03:07 +0000)]
net: dsa: add tag format for MxL862xx switches
Add proprietary special tag format for the MaxLinear MXL862xx family of
switches. While using the same Ethertype as MaxLinear's GSW1xx switches,
the actual tag format differs significantly, hence we need a dedicated
tag driver for that.
selftests: drivers: net: hw: Modify toeplitz.c to poll for packets
Prior to this the receiver would sleep for the configured timeout,
then attempt to receive as many packets as possible. This would result
in a large burst of packets, and we don't necessarily need that many samples.
Linus Torvalds [Wed, 11 Feb 2026 05:46:12 +0000 (21:46 -0800)]
Merge tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates for 7.0
- Implement masked user access
- Add bpf support for internal only per-CPU instructions and inline the
bpf_get_smp_processor_id() and bpf_get_current_task() functions
- Fix pSeries MSI-X allocation failure when quota is exceeded
- Fix recursive pci_lock_rescan_remove locking in EEH event handling
- Support tailcalls with subprogs & BPF exceptions on 64bit
- Extend "trusted" keys to support the PowerVM Key Wrapping Module
(PKWM)
Thanks to Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li,
Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam
Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket
Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, and Venkat Rao Bagalkote.
* tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (27 commits)
powerpc/pseries: plpks: export plpks_wrapping_is_supported
docs: trusted-encryped: add PKWM as a new trust source
keys/trusted_keys: establish PKWM as a trusted source
pseries/plpks: add HCALLs for PowerVM Key Wrapping Module
pseries/plpks: expose PowerVM wrapping features via the sysfs
powerpc/pseries: move the PLPKS config inside its own sysfs directory
pseries/plpks: fix kernel-doc comment inconsistencies
powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()
powerpc: kgdb: Remove OUTBUFMAX constant
powerpc64/bpf: Additional NVR handling for bpf_throw
powerpc64/bpf: Support exceptions
powerpc64/bpf: Add arch_bpf_stack_walk() for BPF JIT
powerpc64/bpf: Avoid tailcall restore from trampoline
powerpc64/bpf: Support tailcalls with subprogs
powerpc64/bpf: Moving tail_call_cnt to bottom of frame
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded
powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory
powerpc64/bpf: Inline bpf_get_smp_processor_id() and bpf_get_current_task/_btf()
powerpc64/bpf: Support internal-only MOV instruction to resolve per-CPU addrs
...
Linus Torvalds [Wed, 11 Feb 2026 05:42:10 +0000 (21:42 -0800)]
Merge tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Fix device reference leak in error path
- Check if system provides a 64-bit free running platform counter
- Minor fixes in debug code
* tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: lba_pci: Add debug code to show IO and PA ranges
parisc: Detect 64-bit free running platform counter
parisc: Fix minor printk issues in iosapic debug code
parisc: Enhance debug code for PAT firmware
parisc: Add PDC PAT call to get free running 64-bit counter
parisc: Fix module path output in qemu tables
parisc: Export model name for MPE/ix
parisc: Prevent interrupts during reboot
parisc: Print hardware IDs as 4 digit hex strings
parisc: kernel: replace kfree() with put_device() in create_tree_node()
Linus Torvalds [Wed, 11 Feb 2026 05:11:08 +0000 (21:11 -0800)]
Merge tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
projects / thirdparty / kernel / stable.git / log
