As reported in [1], a platform firmware update that increased the number
of method parameters and forgot to update a least one of its callers,
caused ACPICA to crash due to use-after-free.
Since this a result of a clear AML issue that arguably cannot be fixed
up by the interpreter (it cannot produce missing data out of thin air),
address it by making ACPICA refuse to evaluate a method if the caller
attempts to pass fewer arguments than expected to it.
Closes: https://github.com/acpica/acpica/issues/1027 [1] Reported-by: Peter Williams <peter@newton.cx> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hansg@kernel.org> Tested-by: Hans de Goede <hansg@kernel.org> # Dell XPS 9640 with BIOS 1.12.0 Link: https://patch.msgid.link/5909446.DvuYhMxLoT@rjwysocki.net Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the firmware gives bad input, that's nothing to do with
the driver's stack at this point etc., so the WARN_ON()
doesn't add any value. Additionally, this is one of the
top syzbot reports now. Just print a message, and as an
added bonus, print the sizes too.
When aoe's rexmit_timer() notices that an aoe target fails to respond to
commands for more than aoe_deadsecs, it calls aoedev_downdev() which
cleans the outstanding aoe and block queues. This can involve sleeping,
such as in blk_mq_freeze_queue(), which should not occur in irq context.
This patch defers that aoedev_downdev() call to the aoe device's
workqueue.
The function core_scsi3_decode_spec_i_port(), in its error code path,
unconditionally calls core_scsi3_lunacl_undepend_item() passing the
dest_se_deve pointer, which may be NULL.
This can lead to a NULL pointer dereference if dest_se_deve remains
unset.
SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg
Unable to handle kernel paging request at virtual address dfff800000000012
Call trace:
core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P)
core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod]
core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod]
target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod]
Fix this by adding a NULL check before calling
core_scsi3_lunacl_undepend_item()
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com> Link: https://lore.kernel.org/r/20250612101556.24829-1-mlombard@redhat.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: John Meneghini <jmeneghi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since termio interface is now obsolete, include/uapi/asm/ioctls.h
has some constant macros referring to "struct termio", this caused
build failure at userspace.
In file included from /usr/include/asm/ioctl.h:12,
from /usr/include/asm/ioctls.h:5,
from tst-ioctls.c:3:
tst-ioctls.c: In function 'get_TCGETA':
tst-ioctls.c:12:10: error: invalid application of 'sizeof' to incomplete type 'struct termio'
12 | return TCGETA;
| ^~~~~~
Even though termios.h provides "struct termio", trying to juggle definitions around to
make it compile could introduce regressions. So better to open code it.
Reported-by: Tulio Magno <tuliom@ascii.art.br> Suggested-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> Closes: https://lore.kernel.org/linuxppc-dev/8734dji5wl.fsf@ascii.art.br/ Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com> Link: https://patch.msgid.link/20250517142237.156665-1-maddy@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
On 32-bit ARCH=um, CONFIG_X86_32 is still defined, so it
doesn't indicate building on real X86 machines. There's
no MSR on UML though, so add a check for CONFIG_X86.
On at least an ASRock 990FX Extreme 4 with a VIA VT6330, the devices
have not yet been enabled by the first time ata_acpi_cbl_80wire() is
called. This means that the ata_for_each_dev loop is never entered,
and a 40 wire cable is assumed.
The VIA controller on this board does not report the cable in the PCI
config space, thus having to fall back to ACPI even though no SATA
bridge is present.
The _GTM values are correctly reported by the firmware through ACPI,
which has already set up faster transfer modes, but due to the above
the controller is forced down to a maximum of UDMA/33.
Resolve this by modifying ata_acpi_cbl_80wire() to directly return the
cable type. First, an unknown cable is assumed which preserves the mode
set by the firmware, and then on subsequent calls when the devices have
been enabled, an 80 wire cable is correctly detected.
Since the function now directly returns the cable type, it is renamed
to ata_acpi_cbl_pata_type().
When the DMA mode is changed on the (still real!) SB AWE32 after
playing a stream and closing, the previous DMA setup was still
silently kept, and it can confuse the hardware, resulting in the
unexpected noises. As a workaround, enforce the disablement of DMA
setups when the DMA setup is changed by the kcontrol.
put_unused_fd() doesn't free the installed file, if we've already done
fd_install(). So we need to also free the sync_file.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/653583/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In error paths, we could unref the submit without calling
drm_sched_entity_push_job(), so msm_job_free() will never get
called. Since drm_sched_job_cleanup() will NULL out the
s_fence, we can use that to detect this case.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/653584/ Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the SMB server reboots and the client immediately accesses the mount
point, a race condition can occur that causes operations to fail with
"Host is down" error.
Reproduction steps:
# Mount SMB share
mount -t cifs //192.168.245.109/TEST /mnt/ -o xxxx
ls /mnt
# Immediate access fails
ls /mnt
ls: cannot access '/mnt': Host is down
# But works if there is a delay
The issue is caused by a race condition between negotiate and reconnect.
The 20-second negotiate timeout mechanism can interfere with the normal
recovery process when both are triggered simultaneously.
The server_unresponsive() timeout triggers cifs_reconnect(), which aborts
ongoing mid requests and causes the ls command to receive -EAGAIN, leading
to -EHOSTDOWN.
Fix this by introducing a dedicated `neg_start` field to
precisely tracks when the negotiate process begins. The timeout check
now uses this accurate timestamp instead of `lstrp`, ensuring that:
1. Timeout is only triggered after negotiate has actually run for 20s
2. The mechanism doesn't interfere with concurrent recovery processes
3. Uninitialized timestamps (value 0) don't trigger false timeouts
Fixes: 7ccc1465465d ("smb: client: fix hang in wait_for_response() for negproto") Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Certain classful qdiscs may invoke their classes' dequeue handler on an
enqueue operation. This may unexpectedly empty the child qdisc and thus
make an in-flight class passive via qlen_notify(). Most qdiscs do not
expect such behaviour at this point in time and may re-activate the
class eventually anyways which will lead to a use-after-free.
The referenced fix commit attempted to fix this behavior for the HFSC
case by moving the backlog accounting around, though this turned out to
be incomplete since the parent's parent may run into the issue too.
The following reproducer demonstrates this use-after-free:
tc qdisc add dev lo root handle 1: drr
tc filter add dev lo parent 1: basic classid 1:1
tc class add dev lo parent 1: classid 1:1 drr
tc qdisc add dev lo parent 1:1 handle 2: hfsc def 1
tc class add dev lo parent 2: classid 2:1 hfsc rt m1 8 d 1 m2 0
tc qdisc add dev lo parent 2:1 handle 3: netem
tc qdisc add dev lo parent 3:1 handle 4: blackhole
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
tc class delete dev lo classid 1:1
echo 1 | socat -u STDIN UDP4-DATAGRAM:127.0.0.1:8888
Since backlog accounting issues leading to a use-after-frees on stale
class pointers is a recurring pattern at this point, this patch takes
a different approach. Instead of trying to fix the accounting, the patch
ensures that qdisc_tree_reduce_backlog always calls qlen_notify when
the child qdisc is empty. This solves the problem because deletion of
qdiscs always involves a call to qdisc_reset() and / or
qdisc_purge_queue() which ultimately resets its qlen to 0 thus causing
the following qdisc_tree_reduce_backlog() to report to the parent. Note
that this may call qlen_notify on passive classes multiple times. This
is not a problem after the recent patch series that made all the
classful qdiscs qlen_notify() handlers idempotent.
Fixes: 3f981138109f ("sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()") Signed-off-by: Lion Ackermann <nnamrec@gmail.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values
which is often ~0. The error value should be tested with
dma_mapping_error().
This patch creates a new function in niu_ops to test if the mapping
failed. The test is fixed in niu_rbr_add_page(), added in
niu_start_xmit() and the successfully mapped pages are unmaped upon error.
Fixes: ec2deec1f352 ("niu: Fix to check for dma mapping errors.") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations.
The comparison in enic_change_mtu() incorrectly used the current
netdev->mtu instead of the new new_mtu value when warning about
an MTU exceeding the port MTU. This could suppress valid warnings
or issue incorrect ones.
Fix the condition and log to properly reflect the new_mtu.
Fixes: ab123fe071c9 ("enic: handle mtu change for vf properly") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Acked-by: John Daley <johndale@cisco.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250628145612.476096-1-alok.a.tiwari@oracle.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Update the Clause 37 Auto-Negotiation implementation to properly align
with the PCS hardware specifications:
- Fix incorrect bit settings in Link Status and Link Duplex fields
- Implement missing sequence steps 2 and 7
These changes ensure CL37 auto-negotiation protocol follows the exact
sequence patterns as specified in the hardware databook.
Fixes: 1bf40ada6290 ("amd-xgbe: Add support for clause 37 auto-negotiation") Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Link: https://patch.msgid.link/20250630192636.3838291-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Smatch complains that the error message isn't set in the caller:
lib/test_objagg.c:923 test_hints_case2()
error: uninitialized symbol 'errmsg'.
This static checker warning only showed up after a recent refactoring
but the bug dates back to when the code was originally added. This
likely doesn't affect anything in real life.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202506281403.DsuyHFTZ-lkp@intel.com/ Fixes: 0a020d416d0a ("lib: introduce initial implementation of object aggregation manager") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/8548f423-2e3b-4bb7-b816-5041de2762aa@sabinyo.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
I226 devices advertise support for the PCI-E link L1.2 substate. However,
due to a hardware limitation, the exit latency from this low-power state
is longer than the packet buffer can tolerate under high traffic
conditions. This can lead to packet loss and degraded performance.
To mitigate this, disable the L1.2 substate. The increased power draw
between L1.1 and L1.2 is insignificant.
Fixes: 43546211738e ("igc: Add new device ID's") Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
MEI GSC interrupt comes from i915. It has top half and bottom half.
Top half is called from i915 interrupt handler. It should be in
irq disabled context.
With RT kernel, by default i915 IRQ handler is in threaded IRQ. MEI GSC
top half might be in threaded IRQ context. generic_handle_irq_safe API
could be called from either IRQ or process context, it disables local
IRQ then calls MEI GSC interrupt top half.
This change fixes A380/A770 GPU boot hang issue with RT kernel.
Fixes: 1e3dc1d8622b ("drm/i915/gsc: add gsc as a mei auxiliary device") Tested-by: Furong Zhou <furong.zhou@intel.com> Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Junxiao Chang <junxiao.chang@intel.com> Link: https://lore.kernel.org/r/20250425151108.643649-1-junxiao.chang@intel.com Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit dccf655f69002d496a527ba441b4f008aa5bebbf) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Closer analysis of CI results history has revealed a dependency of the
error on a few IGT tests, namely:
- igt@api_intel_allocator@fork-simple-stress-signal,
- igt@api_intel_allocator@two-level-inception-interruptible,
- igt@gem_linear_blits@interruptible,
- igt@prime_mmap_coherency@ioctl-errors,
which invisibly trigger the issue, then exhibited with first driver unbind
attempt.
All of the above tests perform actions which are actively interrupted with
signals. Further debugging has allowed to narrow that scope down to
DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring
submission, in particular.
If successful then that function, or its execlists or GuC submission
equivalent, is supposed to be called only once per GEM context engine,
followed by raise of a flag that prevents the function from being called
again. The function is expected to unwind its internal errors itself, so
it may be safely called once more after it returns an error.
In case of ring submission, the function first gets a reference to the
engine's legacy timeline and then allocates a VMA. If the VMA allocation
fails, e.g. when i915_vma_instance() called from inside is interrupted
with a signal, then ring_context_alloc() fails, leaving the timeline held
referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the
timeline is got, and only that last one is put on successful completion.
As a consequence, the legacy timeline, with its underlying engine status
page's VMA object, is still held and not released on driver unbind.
Get the legacy timeline only after successful allocation of the context
engine's VMA.
v2: Add a note on other submission methods (Krzysztof Karas):
Both execlists and GuC submission use lrc_alloc() which seems free
from a similar issue.
Fixes: 75d0a7f31eec ("drm/i915: Lift timeline into intel_context") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061 Cc: Chris Wilson <chris.p.wilson@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Nitin Gote <nitin.r.gote@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20250611104352.1014011-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes a logic issue in mlxreg_lc_completion_notify() where the
intention was to check if MLXREG_LC_POWERED flag is not set before
powering on the device.
The original code used "state & ~MLXREG_LC_POWERED" to check for the
absence of the POWERED bit. However this condition evaluates to true
even when other bits are set, leading to potentially incorrect
behavior.
Corrected the logic to explicitly check for the absence of
MLXREG_LC_POWERED using !(state & MLXREG_LC_POWERED).
Fixes: 62f9529b8d5c ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices") Suggested-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://lore.kernel.org/r/20250630105812.601014-1-alok.a.tiwari@oracle.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
After retrieving WMI data blocks in sysfs callbacks, check for the
validity of them before dereferencing their content.
Reported-by: Jan Graczyk <jangraczyk@yahoo.ca> Closes: https://lore.kernel.org/r/CAHk-=wgMiSKXf7SvQrfEnxVtmT=QVQPjJdNjfm3aXS7wc=rzTw@mail.gmail.com/ Fixes: e8a60aa7404b ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Kurt Borja <kuurtb@gmail.com> Link: https://lore.kernel.org/r/20250630-sysman-fix-v2-1-d185674d0a30@gmail.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There was an error pointer vs NULL bug in __igt_breadcrumbs_smoketest().
The __mock_request_alloc() function implements the
smoketest->request_alloc() function pointer. It was supposed to return
error pointers, but it propogates the NULL return from mock_request()
so in the event of a failure, it would lead to a NULL pointer
dereference.
To fix this, change the mock_request() function to return error pointers
and update all the callers to expect that.
Fixes: 52c0fdb25c7c ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://lore.kernel.org/r/685c1417.050a0220.696f5.5c05@mx.google.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 778fa8ad5f0f23397d045c7ebca048ce8def1c43) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In target mode, extra interrupts can be received between the end of a
transfer and halting the module if the host continues sending more data.
If the interrupt from this occurs after the reinit_completion() then the
completion counter is left at a non-zero value. The next unrelated
transfer initiated by userspace will then complete immediately without
waiting for the interrupt or writing to the RX buffer.
Fix it by resetting the counter before the transfer so that lingering
values are cleared. This is done after clearing the FIFOs and the
status register but before the transfer is initiated, so no interrupts
should be received at this point resulting in other race conditions.
Fixes: 4f5ee75ea171 ("spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion") Signed-off-by: James Clark <james.clark@linaro.org> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20250627-james-nxp-spi-dma-v4-1-178dba20c120@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit c9b1150a68d9 ("drm/atomic-helper: Re-order bridge chain pre-enable
and post-disable") changed the call sequence to the CRTC enable/disable
and bridge pre_enable/post_disable methods, so those bridge methods are
now called when CRTC is not yet enabled.
This causes a lockup observed on Samsung Peach-Pit/Pi Chromebooks. The
source of this lockup is a call to fimd_dp_clock_enable() function, when
FIMD device is not yet runtime resumed. It worked before the mentioned
commit only because the CRTC implemented by the FIMD driver was always
enabled what guaranteed the FIMD device to be runtime resumed.
This patch adds runtime PM guards to the fimd_dp_clock_enable() function
to enable its proper operation also when the CRTC implemented by FIMD is
not yet enabled.
Fixes: 196e059a8a6a ("drm/exynos: convert clock_enable crtc callback to pipeline clock") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The `dma_map_XXX()` functions can fail and must be checked using
`dma_mapping_error()`. This patch adds proper error handling for all
DMA mapping calls.
In `atl1_alloc_rx_buffers()`, if DMA mapping fails, the buffer is
deallocated and marked accordingly.
In `atl1_tx_map()`, previously mapped buffers are unmapped and the
packet is dropped on failure.
If `atl1_xmit_frame()` drops the packet, increment the tx_error counter.
At __inode_add_ref() when processing extrefs, if we jump into the next
label we have an undefined value of victim_name.len, since we haven't
initialized it before we did the goto. This results in an invalid memory
access in the next iteration of the loop since victim_name.len was not
initialized to the length of the name of the current extref.
Fix this by initializing victim_name.len with the current extref's name
length.
Fixes: e43eec81c516 ("btrfs: use struct qstr instead of name and namelen pairs") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
During log replay, at __add_inode_ref(), when we are searching for inode
ref keys we totally ignore if btrfs_search_slot() returns an error. This
may make a log replay succeed when there was an actual error and leave
some metadata inconsistency in a subvolume tree. Fix this by checking if
an error was returned from btrfs_search_slot() and if so, return it to
the caller.
Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When PA Create Sync is enabled, advertising resumes unexpectedly.
Therefore, it's necessary to check whether advertising is currently
active before attempting to pause it.
< HCI Command: LE Add Device To... (0x08|0x0011) plen 7 #1345 [hci0] 48.306205
Address type: Random (0x01)
Address: 4F:84:84:5F:88:17 (Resolvable)
Identity type: Random (0x01)
Identity: FC:5B:8C:F7:5D:FB (Static)
< HCI Command: LE Set Address Re.. (0x08|0x002d) plen 1 #1347 [hci0] 48.308023
Address resolution: Enabled (0x01)
...
< HCI Command: LE Set Extended A.. (0x08|0x0039) plen 6 #1349 [hci0] 48.309650
Extended advertising: Enabled (0x01)
Number of sets: 1 (0x01)
Entry 0
Handle: 0x01
Duration: 0 ms (0x00)
Max ext adv events: 0
...
< HCI Command: LE Periodic Adve.. (0x08|0x0044) plen 14 #1355 [hci0] 48.314575
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0x02
Adv address type: Random (0x01)
Adv address: 4F:84:84:5F:88:17 (Resolvable)
Identity type: Random (0x01)
Identity: FC:5B:8C:F7:5D:FB (Static)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
Fixes: ad383c2c65a5 ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled") Signed-off-by: Yang Li <yang.li@amlogic.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
dma_map_XXX() functions return as error values DMA_MAPPING_ERROR which is
often ~0. The error value should be tested with dma_mapping_error() like
it was done in qla26xx_dport_diagnostics().
Fixes: 818c7f87a177 ("scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDP") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Link: https://lore.kernel.org/r/20250617161115.39888-2-fourier.thomas@gmail.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We found a few different systems hung up in writeback waiting on the same
page lock, and one task waiting on the NFS_LAYOUT_DRAIN bit in
pnfs_update_layout(), however the pnfs_layout_hdr's plh_outstanding count
was zero.
It seems most likely that this is another race between the waiter and waker
similar to commit ed0172af5d6f ("SUNRPC: Fix a race to wake a sync task").
Fix it up by applying the advised barrier.
Fixes: 880265c77ac4 ("pNFS: Avoid a live lock condition in pnfs_update_layout()") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The obj_event may be loaded immediately after inserted, then if the
list_head is not initialized then we may get a poisonous pointer. This
fixes the crash below:
Fix warnings reported by sparse, related to incorrect type:
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: warning: incorrect type in assignment (different base types)
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: expected restricted __virtio32 [usertype] len
drivers/platform/mellanox/mlxbf-tmfifo.c:284:38: got unsigned long
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404040339.S7CUIgf3-lkp@intel.com/ Fixes: 78034cbece79 ("platform/mellanox: mlxbf-tmfifo: Drop the Rx packet if no more descriptors") Signed-off-by: David Thompson <davthompson@nvidia.com> Link: https://lore.kernel.org/r/20250613214608.2250130-1-davthompson@nvidia.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix the following `make dtbs_check` warnings for all t8103 based devices:
arch/arm64/boot/dts/apple/t8103-j274.dtb: network@0,0: $nodename:0: 'network@0,0' does not match '^wifi(@.*)?$'
from schema $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
arch/arm64/boot/dts/apple/t8103-j274.dtb: network@0,0: Unevaluated properties are not allowed ('local-mac-address' was unexpected)
from schema $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
Fixes: bf2c05b619ff ("arm64: dts: apple: t8103: Expose PCI node for the WiFi MAC address") Signed-off-by: Janne Grunau <j@jannau.net> Reviewed-by: Sven Peter <sven@kernel.org> Link: https://lore.kernel.org/r/20250611-arm64_dts_apple_wifi-v1-1-fb959d8e1eb4@jannau.net Signed-off-by: Sven Peter <sven@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If msdc_prepare_data() fails to map the DMA region, the request is
not prepared for data receiving, but msdc_start_data() proceeds
the DMA with previous setting.
Since this will lead a memory corruption, we have to stop the
request operation soon after the msdc_prepare_data() fails to
prepare it.
A poorly implemented DisplayPort Alt Mode port partner can indicate
that its pin assignment capabilities are greater than the maximum
value, DP_PIN_ASSIGN_F. In this case, calls to pin_assignment_show
will cause a BRK exception due to an out of bounds array access.
Prevent for loop in pin_assignment_show from accessing
invalid values in pin_assignments by adding DP_PIN_ASSIGN_MAX
value in typec_dp.h and using i < DP_PIN_ASSIGN_MAX as a loop
condition.
drvdata::gpiods is supposed to hold an array of 'gpio_desc' pointers. But
the memory is allocated for only one pointer. This will lead to
out-of-bounds access later in the code if 'config::ngpios' is > 1. So
fix the code to allocate enough memory to hold 'config::ngpios' of GPIO
descriptors.
While at it, also move the check for memory allocation failure to be below
the allocation to make it more readable.
Cc: stable@vger.kernel.org # 5.0 Fixes: d6cd33ad7102 ("regulator: gpio: Convert to use descriptors") Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Link: https://patch.msgid.link/20250703103549.16558-1-mani@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The unconditional call of hci_disable_advertising_sync() in
mesh_send_done_sync() also disables other LE advertisings (non mesh
related).
I am not sure whether this call is required at all, but checking the
adv_instances list (like done at other places) seems to solve the
problem.
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Cc: stable@vger.kernel.org Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the message of commit b338d91703fa ("Bluetooth: Implement
support for Mesh"), MGMT_OP_SET_MESH_RECEIVER should set the passive scan
parameters. Currently the scan interval and window parameters are
silently ignored, although user space (bluetooth-meshd) expects that
they can be used [1]
[1] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/mesh/mesh-io-mgmt.c#n344 Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Cc: stable@vger.kernel.org Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts minor parts of the changes made in commit b338d91703fa
("Bluetooth: Implement support for Mesh"). It looks like these changes
were only made for development purposes but shouldn't have been part of
the commit.
Fixes: b338d91703fa ("Bluetooth: Implement support for Mesh") Cc: stable@vger.kernel.org Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the BROKEN_SD_DISCARD quirk for certain SanDisk SD cards from the
`mmc_blk_fixups[]` to `mmc_sd_fixups[]`. This ensures the quirk is
applied earlier in the device initialization process, aligning with the
reasoning in [1]. Applying the quirk sooner prevents the kernel from
incorrectly enabling discard support on affected cards during initial
setup.
In vmci_transport_packet_init memset the vmci_transport_packet before
populating the fields to avoid any uninitialised data being left in the
structure.
Cc: Bryan Tan <bryan-bt.tan@broadcom.com> Cc: Vishnu Dasa <vishnu.dasa@broadcom.com> Cc: Broadcom internal kernel review list Cc: Stefano Garzarella <sgarzare@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Simon Horman <horms@kernel.org> Cc: virtualization@lists.linux.dev Cc: netdev@vger.kernel.org Cc: stable <stable@kernel.org> Signed-off-by: HarshaVardhana S A <harshavardhana.sa@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://patch.msgid.link/20250701122254.2397440-1-gregkh@linuxfoundation.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a device is disabled unblocking load/store on its own is not useful
as a full re-enable of the function is necessary anyway. Note that SCLP
Write Event Data Action Qualifier 0 (Reset) leaves the device disabled
and triggers this case unless the driver already requests a reset.
cmos_interrupt() can be called in a non-interrupt context, such as in
an ACPI event handler (which runs in an interrupt thread). Therefore,
usage of spin_lock(&rtc_lock) is insecure. Use spin_lock_irqsave() /
spin_unlock_irqrestore() instead.
Before a misguided
commit 6950d046eb6e ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ")
the cmos_interrupt() function used spin_lock_irqsave(). That commit
changed it to spin_lock() and broke locking, which was partially fixed in
commit 13be2efc390a ("rtc: cmos: Disable irq around direct invocation of cmos_interrupt()")
That second commit did not take account of the ACPI fixed event handler
pathway, however. It introduced local_irq_disable() workarounds in
cmos_check_wkalrm(), which can cause problems on PREEMPT_RT kernels
and are now unnecessary.
Add an explicit comment so that this change will not be reverted by
mistake.
Cc: stable@vger.kernel.org Fixes: 6950d046eb6e ("rtc: cmos: Replace spin_lock_irqsave with spin_lock in hard IRQ") Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Reported-by: Chris Bainbridge <chris.bainbridge@gmail.com> Closes: https://lore.kernel.org/all/aDtJ92foPUYmGheF@debian.local/ Link: https://lore.kernel.org/r/20250607210608.14835-1-mat.jonczyk@o2.pl Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from
pXd_free_pYd_table()") removes the pxd_present() checks because the
caller checks pxd_present(). But, in case of vmap_try_huge_pud(), the
caller only checks pud_present(); pud_free_pmd_page() recurses on each
pmd through pmd_free_pte_page(), wherein the pmd may be none. Thus it is
possible to hit a warning in the latter, since pmd_none => !pmd_table().
Thus, add a pmd_present() check in pud_free_pmd_page().
This problem was found by code inspection.
Fixes: 9c006972c3fe ("arm64: mmu: drop pXd_present() checks from pXd_free_pYd_table()") Cc: stable@vger.kernel.org Reported-by: Ryan Roberts <ryan.roberts@arm.com> Acked-by: David Hildenbrand <david@redhat.com> Signed-off-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20250527082633.61073-1-dev.jain@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the perf and powercap protocol relies on the protocol domain
attributes, which just ensures that one fastchannel per domain, before
instantiating fastchannels for all possible message-ids. Fix this by
ensuring that each message-id supports fastchannel before initialization.
Logs:
| scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:0] - ret:-95. Using regular messaging
| scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:1] - ret:-95. Using regular messaging
| scmi: Failed to get FC for protocol 13 [MSG_ID:6 / RES_ID:2] - ret:-95. Using regular messaging
CC: stable@vger.kernel.org Reported-by: Johan Hovold <johan+linaro@kernel.org> Closes: https://lore.kernel.org/lkml/ZoQjAWse2YxwyRJv@hovoldconsulting.com/ Fixes: 6f9ea4dabd2d ("firmware: arm_scmi: Generalize the fast channel support") Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
[Cristian: Modified the condition checked to establish support or not] Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Message-Id: <20250429141108.406045-2-cristian.marussi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Follow the non-ringed pbuf struct io_buffer_list allocations and account
it against the memcg. There is low chance of that being an actual
problem as ring provided buffer should either pin user memory or
allocate it, which is already accounted.
Currently NVMe uring_cmd completions will complete locally, if they are
polled. This is done because those completions are always invoked from
task context. And while that is true, there's no guarantee that it's
invoked under the right ring context, or even task. If someone does
NVMe passthrough via multiple threads and with a limited number of
poll queues, then ringA may find completions from ringB. For that case,
completing the request may not be sound.
Always just punt the passthrough completions via task_work, which will
redirect the completion, if needed.
After commit c104c16073b7 ("Kunit to check the longest symbol length"),
there is a warning when building with clang because there is now a
definition of unlikely from compiler.h in tools/include/linux, which
conflicts with the one in the instruction decoder selftest:
The longest length of a symbol (KSYM_NAME_LEN) was increased to 512
in the reference [1]. This patch adds kunit test suite to check the longest
symbol length. These tests verify that the longest symbol length defined
is supported.
This test can also help other efforts for longer symbol length,
like [2].
The test suite defines one symbol with the longest possible length.
The first test verify that functions with names of the created
symbol, can be called or not.
The second test, verify that the symbols are created (or
not) in the kernel symbol table.
In case of stack corruption stack_invalid() is called and the expectation
is that register r10 contains the last breaking event address. This
dependency is quite subtle and broke a couple of years ago without that
anybody noticed.
Fix this by getting rid of the dependency and read the last breaking event
address from lowcore.
If we fail to commit an entity, we need to restore the
UVC_CTRL_DATA_BACKUP for the other uncommitted entities. Otherwise the
control cache and the device would be out of sync.
Cc: stable@kernel.org Fixes: b4012002f3a3 ("[media] uvcvideo: Add support for control events") Reported-by: Hans de Goede <hdegoede@redhat.com> Closes: https://lore.kernel.org/linux-media/fe845e04-9fde-46ee-9763-a6f00867929a@redhat.com/ Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-ID: <20250224-uvc-data-backup-v2-3-de993ed9823b@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c: In function ‘bnxt_hwrm_queue_cos2bw_cfg’:
cc1: error: writing 12 bytes into a region of size 1 [-Werror=stringop-overflow ]
In file included from drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:19:
drivers/net/ethernet/broadcom/bnxt/bnxt_hsi.h:6045:17: note: destination object ‘unused_0’ of size 1
6045 | u8 unused_0;
Fix it by modifying struct hwrm_queue_cos2bw_cfg_input to use an array
of sub struct similar to the previous patch. This will eliminate the
pointer arithmetc to calculate the destination pointer passed to
memcpy().
inlined from ‘bnxt_hwrm_queue_cos2bw_qcfg’ at drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:165:3,
./include/linux/fortify-string.h:592:4: error: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror]
__read_overflow2_field(q_size_field, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Modify the FW interface defintion of struct hwrm_queue_cos2bw_qcfg_output
to use an array of sub struct for the queue1 to queue7 fields. Note that
the layout of the queue0 fields are different and these are not part of
the array. This makes the code much cleaner by removing the pointer
arithmetic for memcpy().
In function ‘fortify_memcpy_chk’,
inlined from ‘bnxt_hwrm_queue_cos2bw_cfg’ at drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c:133:3:
include/linux/fortify-string.h:592:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The field group is already defined and starts at queue_id:
Memory for 'struct omfs_extent' and a 'e_extent_count' number of extent
entries is indirectly allocated through 'bh->b_data', which is a pointer
to data within the page. This implies that the member 'e_entry'
(which is the start of extent entries) functions more like an array than
a single object of type 'struct omfs_extent_entry'.
So we better turn this object into a proper array, in this case a
flexible-array member, and with that, fix the following
-Wstringop-overflow warning seen after building s390 architecture with
allyesconfig (GCC 13):
fs/omfs/file.c: In function 'omfs_grow_extent':
include/linux/fortify-string.h:57:33: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=]
57 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:648:9: note: in expansion of macro '__underlying_memcpy'
648 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:693:26: note: in expansion of macro '__fortify_memcpy_chk'
693 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
fs/omfs/file.c:170:9: note: in expansion of macro 'memcpy'
170 | memcpy(terminator, entry, sizeof(struct omfs_extent_entry));
| ^~~~~~
In file included from fs/omfs/omfs.h:8,
from fs/omfs/file.c:11:
fs/omfs/omfs_fs.h:80:34: note: at offset 16 into destination object 'e_entry' of size 16
80 | struct omfs_extent_entry e_entry; /* start of extent entries */
| ^~~~~~~
There are some binary differences before and after changes, but this are
expected due to the change in the size of 'struct omfs_extent' and the
necessary adjusments.
This helps with the ongoing efforts to globally enable
-Wstringop-overflow.
Link: https://github.com/KSPP/linux/issues/330 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function mod_hdcp_hdcp1_enable_encryption() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference in
mod_hdcp_hdcp2_enable_encryption().
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.
Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix") Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # v5.8 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Once the DSI Link and DSI Phy are initialized, the code needs to wait
for Clk and Data Lanes to be ready, before continuing configuration.
This is in accordance with the DSI Start-up procedure, found in the
Technical Reference Manual of Texas Instrument's J721E SoC[0] which
houses this DSI TX controller.
If the previous bridge (or crtc/encoder) are configured pre-maturely,
the input signal FIFO gets corrupt. This introduces a color-shift on the
display.
Allow the driver to wait for the clk and data lanes to get ready during
DSI enable.
Fix the OF node pointer passed to the of_drm_find_bridge() call to find
the next bridge in the display chain.
The code to find the next panel (and create its panel-bridge) works
fine, but to find the next (non-panel) bridge does not.
To find the next bridge in the pipeline, we need to pass "np" - the OF
node pointer of the next entity in the devicetree chain. Passing
"of_node" to of_drm_find_bridge (which is what the code does currently)
will fetch the bridge for the cdns-dsi which is not what's required.
The driver code doesn't have a Phy de-initialization path as yet, and so
it does not clear the phy_initialized flag while suspending. This is a
problem because after resume the driver looks at this flag to determine
if a Phy re-initialization is required or not. It is in fact required
because the hardware is resuming from a suspend, but the driver does not
carry out any re-initialization causing the D-Phy to not work at all.
Call the counterparts of phy_init() and phy_power_on(), that are
phy_exit() and phy_power_off(), from _bridge_post_disable(), and clear
the flags so that the Phy can be initialized again when required.
The crtc_* mode parameters do not get generated (duplicated in this
case) from the regular parameters before the mode validation phase
begins.
The rest of the code conditionally uses the crtc_* parameters only
during the bridge enable phase, but sticks to the regular parameters
for mode validation. In this singular instance, however, the driver
tries to use the crtc_clock parameter even during the mode validation,
causing the validation to fail.
Allow the D-Phy config checks to use mode->clock instead of
mode->crtc_clock during mode_valid checks, like everywhere else in the
driver.
q->gws is not updated atomically with qpd->mapped_gws_queue. If a
runlist is created between pqm_set_gws and update_queue it will
contain a queue which uses GWS in a process with no GWS allocated.
This will result in a scheduler hang.
Use q->properties.is_gws which is changed while holding the DQM lock.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b98370220eb3110e82248e3354e16a489a492cfb) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a small chance that the GPU is already hot during boot. In that
case, the call to of_devfreq_cooling_register() will immediately try to
apply devfreq cooling, as seen in the following crash:
At this point we haven't initialized the GMU at all yet, so we cannot read
the GMU registers inside a6xx_gpu_busy(). A similar issue was fixed before
in commit 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in
6xx gpu_busy"): msm_devfreq_init() does call devfreq_suspend_device(), but
unlike msm_devfreq_suspend(), it doesn't set the df->suspended flag
accordingly. This means the df->suspended flag does not match the actual
devfreq state after initialization and msm_devfreq_get_dev_status() will
end up accessing GMU registers, causing the crash.
Fix this by setting df->suspended correctly during initialization.
Cc: stable@vger.kernel.org Fixes: 6694482a70e9 ("drm/msm: Avoid unclocked GMU register access in 6xx gpu_busy") Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/650772/ Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
coming from KMS poll helpers. Shutting down poll helpers runs them
one final time when the USB device is already gone.
Run drm_dev_unplug() first in udl's USB disconnect handler. Udl's
polling code already handles disconnects gracefully if the device has
been marked as unplugged.
In tegra_crtc_reset(), new memory is allocated with kzalloc(), but
no check is performed. Before calling __drm_atomic_helper_crtc_reset,
state should be checked to prevent possible null pointer dereference.
Fixes: b7e0b04ae450 ("drm/tegra: Convert to using __drm_atomic_helper_crtc_reset() for reset.") Cc: stable@vger.kernel.org Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20241106095906.15247-1-chenqiuji666@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes to a plane's type after it has been registered aren't propagated
to userspace automatically. This could possibly be achieved by updating
the property, but since we can already determine which type this should
be before the registration, passing in the right type from the start is
a much better solution.
Commit 704d3d60fec4 ("drm/etnaviv: don't block scheduler when GPU is still
active") ensured that active jobs are returned to the pending list when
extending the timeout. However, it didn't use the pending list's lock to
manipulate the list, which causes a race condition as the scheduler's
workqueues are running.
Hold the lock while manipulating the scheduler's pending list to prevent
a race.
Cc: stable@vger.kernel.org Fixes: 704d3d60fec4 ("drm/etnaviv: don't block scheduler when GPU is still active") Reported-by: Philipp Stanner <phasta@kernel.org> Closes: https://lore.kernel.org/dri-devel/964e59ba1539083ef29b06d3c78f5e2e9b138ab8.camel@mailbox.org/ Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Stanner <phasta@kernel.org> Link: https://lore.kernel.org/r/20250602132240.93314-1-mcanal@igalia.com Signed-off-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
During wacom_initialize_remotes() a fifo buffer is allocated
with kfifo_alloc() and later a cleanup action is registered
during devm_add_action_or_reset() to clean it up.
However if the code fails to create a kobject and register it
with sysfs the code simply returns -ENOMEM before the cleanup
action is registered leading to a memory leak.
Fix this by ensuring the fifo is freed when the kobject creation
and registration process fails.
Commit 2f2bd7cbd1d1 ("hid: lenovo: Resend all settings on reset_resume
for compact keyboards") introduced a regression for ThinkPad TrackPoint
Keyboard II by removing the conditional check for enabling F7/9/11 mode
needed for compact keyboards only. As a result, the non-compact
keyboards can no longer toggle Fn-lock via Fn+Esc, although it can be
controlled via sysfs knob that directly sends raw commands.
This patch restores the previous conditional check without any
additions.
Cc: stable@vger.kernel.org Fixes: 2f2bd7cbd1d1 ("hid: lenovo: Resend all settings on reset_resume for compact keyboards") Signed-off-by: Iusico Maxim <iusico.maxim@libero.it> Signed-off-by: Jiri Kosina <jkosina@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Each superblock contains a copy of the device item for that device. In a
transaction which drops a chunk but doesn't create any new ones, we were
correctly updating the device item in the chunk tree but not copying
over the new bytes_used value to the superblock.
This can be seen by doing the following:
# dd if=/dev/zero of=test bs=4096 count=2621440
# mkfs.btrfs test
# mount test /root/temp
# cd /root/temp
# for i in {00..10}; do dd if=/dev/zero of=$i bs=4096 count=32768; done
# sync
# rm *
# sync
# btrfs balance start -dusage=0 .
# sync
# cd
# umount /root/temp
# btrfs check test
For btrfs-check to detect this, you will also need my patch at
https://github.com/kdave/btrfs-progs/pull/991.
Change btrfs_remove_dev_extents() so that it adds the devices to the
fs_info->post_commit_list if they're not there already. This causes
btrfs_commit_device_sizes() to be called, which updates the bytes_used
value in the superblock.
Fixes: bbbf7243d62d ("btrfs: combine device update operations during transaction commit") CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Mark Harmstone <maharmstone@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have a race between a rename and directory inode logging that if it
happens and we crash/power fail before the rename completes, the next time
the filesystem is mounted, the log replay code will end up deleting the
file that was being renamed.
This is best explained following a step by step analysis of an interleaving
of steps that lead into this situation.
Consider the initial conditions:
1) We are at transaction N;
2) We have directories A and B created in a past transaction (< N);
3) We have inode X corresponding to a file that has 2 hardlinks, one in
directory A and the other in directory B, so we'll name them as
"A/foo_link1" and "B/foo_link2". Both hard links were persisted in a
past transaction (< N);
4) We have inode Y corresponding to a file that as a single hard link and
is located in directory A, we'll name it as "A/bar". This file was also
persisted in a past transaction (< N).
The steps leading to a file loss are the following and for all of them we
are under transaction N:
1) Link "A/foo_link1" is removed, so inode's X last_unlink_trans field
is updated to N, through btrfs_unlink() -> btrfs_record_unlink_dir();
2) Task A starts a rename for inode Y, with the goal of renaming from
"A/bar" to "A/baz", so we enter btrfs_rename();
3) Task A inserts the new BTRFS_INODE_REF_KEY for inode Y by calling
btrfs_insert_inode_ref();
4) Because the rename happens in the same directory, we don't set the
last_unlink_trans field of directoty A's inode to the current
transaction id, that is, we don't cal btrfs_record_unlink_dir();
5) Task A then removes the entries from directory A (BTRFS_DIR_ITEM_KEY
and BTRFS_DIR_INDEX_KEY items) when calling __btrfs_unlink_inode()
(actually the dir index item is added as a delayed item, but the
effect is the same);
6) Now before task A adds the new entry "A/baz" to directory A by
calling btrfs_add_link(), another task, task B is logging inode X;
7) Task B starts a fsync of inode X and after logging inode X, at
btrfs_log_inode_parent() it calls btrfs_log_all_parents(), since
inode X has a last_unlink_trans value of N, set at in step 1;
8) At btrfs_log_all_parents() we search for all parent directories of
inode X using the commit root, so we find directories A and B and log
them. Bu when logging direct A, we don't have a dir index item for
inode Y anymore, neither the old name "A/bar" nor for the new name
"A/baz" since the rename has deleted the old name but has not yet
inserted the new name - task A hasn't called yet btrfs_add_link() to
do that.
Note that logging directory A doesn't fallback to a transaction
commit because its last_unlink_trans has a lower value than the
current transaction's id (see step 4);
9) Task B finishes logging directories A and B and gets back to
btrfs_sync_file() where it calls btrfs_sync_log() to persist the log
tree;
10) Task B successfully persisted the log tree, btrfs_sync_log() completed
with success, and a power failure happened.
We have a log tree without any directory entry for inode Y, so the
log replay code deletes the entry for inode Y, name "A/bar", from the
subvolume tree since it doesn't exist in the log tree and the log
tree is authorative for its index (we logged a BTRFS_DIR_LOG_INDEX_KEY
item that covers the index range for the dentry that corresponds to
"A/bar").
Since there's no other hard link for inode Y and the log replay code
deletes the name "A/bar", the file is lost.
The issue wouldn't happen if task B synced the log only after task A
called btrfs_log_new_name(), which would update the log with the new name
for inode Y ("A/bar").
Fix this by pinning the log root during renames before removing the old
directory entry, and unpinning after btrfs_log_new_name() is called.
Fixes: 259c4b96d78d ("btrfs: stop doing unnecessary log updates during a rename") CC: stable@vger.kernel.org # 5.18+ Reviewed-by: Boris Burkov <boris@bur.io> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
OBEX download from iPhone is currently slow due to small packet size
used to transfer data which doesn't follow the MTU negotiated during
L2CAP connection, i.e. 672 bytes instead of 32767:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 18 len 4
PSM: 4103 (0x1007)
Source CID: 72
> ACL Data RX: Handle 11 flags 0x02 dlen 16
L2CAP: Connection Response (0x03) ident 18 len 8
Destination CID: 14608
Source CID: 72
Result: Connection successful (0x0000)
Status: No further information available (0x0000)
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 20 len 19
Destination CID: 14608
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 72 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 72 len 21
Source CID: 14608
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 672
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 20 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 1 ReqSeq 2
< ACL Data TX: Handle 11 flags 0x00 dlen 13
Channel: 14608 len 9 ctrl 0x0204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 680
Channel: 72 len 676 ctrl 0x0304 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Unsegmented TxSeq 2 ReqSeq 3
The MTUs are negotiated for each direction. In this traces 32767 for
iPhone->localhost and no MTU for localhost->iPhone, which based on
'4.4 L2CAP_CONFIGURATION_REQ' (Core specification v5.4, Vol. 3, Part
A):
The only parameters that should be included in the
L2CAP_CONFIGURATION_REQ packet are those that require different
values than the default or previously agreed values.
...
Any missing configuration parameters are assumed to have their
most recently explicitly or implicitly accepted values.
and '5.1 Maximum transmission unit (MTU)':
If the remote device sends a positive L2CAP_CONFIGURATION_RSP
packet it should include the actual MTU to be used on this channel
for traffic flowing into the local device.
...
The default value is 672 octets.
is set by BlueZ to 672 bytes.
It seems that the iPhone used the lowest negotiated value to transfer
data to the localhost instead of the negotiated one for the incoming
direction.
This could be fixed by using the MTU negotiated for the other
direction, if exists, in the L2CAP_CONFIGURATION_RSP.
This allows to use segmented packets as in the following traces:
< ACL Data TX: Handle 11 flags 0x00 dlen 12
L2CAP: Connection Request (0x02) ident 22 len 4
PSM: 4103 (0x1007)
Source CID: 72
< ACL Data TX: Handle 11 flags 0x00 dlen 27
L2CAP: Configure Request (0x04) ident 24 len 19
Destination CID: 2832
Flags: 0x0000
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 26
L2CAP: Configure Request (0x04) ident 15 len 18
Destination CID: 72
Flags: 0x0000
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 0
Monitor timeout: 0
Maximum PDU size: 65527
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
< ACL Data TX: Handle 11 flags 0x00 dlen 29
L2CAP: Configure Response (0x05) ident 15 len 21
Source CID: 2832
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 32
Max transmit: 255
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
> ACL Data RX: Handle 11 flags 0x02 dlen 32
L2CAP: Configure Response (0x05) ident 24 len 24
Source CID: 72
Flags: 0x0000
Result: Success (0x0000)
Option: Maximum Transmission Unit (0x01) [mandatory]
MTU: 32767
Option: Retransmission and Flow Control (0x04) [mandatory]
Mode: Enhanced Retransmission (0x03)
TX window size: 63
Max transmit: 3
Retransmission timeout: 2000
Monitor timeout: 12000
Maximum PDU size: 1009
Option: Frame Check Sequence (0x05) [mandatory]
FCS: 16-bit FCS (0x01)
...
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0x4202 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Start (len 21884) TxSeq 1 ReqSeq 2
> ACL Data RX: Handle 11 flags 0x02 dlen 1009
Channel: 72 len 1005 ctrl 0xc204 [PSM 4103 mode Enhanced Retransmission (0x03)] {chan 8}
I-frame: Continuation TxSeq 2 ReqSeq 2
This has been tested with kernel 5.4 and BlueZ 5.77.
Cc: stable@vger.kernel.org Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency")
introduced a regression on the i.MX6UL EVK board. The issue can be
reproduced with the following steps:
- Open vi on the board.
- Paste a text file (~150 characters).
- Save the file, then repeat the process.
- Compare the sha256sum of the saved files.
The checksums do not match due to missing characters or entire lines.
Fix this by restoring the RXTL value to 1 when the UART is used as a
console.
This ensures timely RX interrupts and reliable data reception in console
mode.
With this change, pasted content is saved correctly, and checksums are
always consistent.
The 8250 binding before converting to json-schema states,
- clock-frequency : the input clock frequency for the UART
or
- clocks phandle to refer to the clk used as per Documentation/devicetree
for clock-related properties, where "or" indicates these properties
shouldn't exist at the same time.
Additionally, the behavior of Linux's driver is strange when both clocks
and clock-frequency are specified: it ignores clocks and obtains the
frequency from clock-frequency, left the specified clocks unclaimed. It
may even be disabled, which is undesired most of the time.
But "anyOf" doesn't prevent these two properties from coexisting, as it
considers the object valid as long as there's at LEAST one match.
Let's switch to "oneOf" and disallows the other property if one exists,
precisely matching the original binding and avoiding future confusion on
the driver's behavior.
Fixes: e69f5dc623f9 ("dt-bindings: serial: Convert 8250 to json-schema") Cc: stable <stable@kernel.org> Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250623093445.62327-1-ziyao@disroot.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
