Hauke Mehrtens [Sat, 24 Dec 2022 13:39:17 +0000 (14:39 +0100)]
mac80211: Do not build brcmsmac on bcm47xx_legacy
brcmsmac needs bcma. bcma is build into the kernel for the other bcm47xx
subtargets, but not for the legacy target because it only uses ssb. We
could build bcma as a module for bcm47xx_legacy, but none of these old
devices uses a wifi card supported by brcsmac.
Hauke Mehrtens [Sat, 17 Dec 2022 21:10:39 +0000 (22:10 +0100)]
gdb: Do not link against xxhash
libxxhash is now available in the OpenWrt package feed and gdb will link
against it if gdb finds this library. Explicitly deactivate the usage
of xxhash.
Allow forced flashing of a factory firmware image, after checking for the
correct FIT magic header and Linksys board-specific footer. Details of the
footer are already described in scripts/linksys-image.sh.
This is convenient as it avoids using a TFTP server or OEM GUI, and allows
restoring OEM firmware or installing a "breaking" OpenWrt update (e.g DSA
migration and kernel repartition) directly from the command line.
Devices supported at this time include EA6350v3, EA8300, MR8300 and WHW01.
Reviewed-by: Robert Marko <robimarko@gmail.com> Tested-by: Wyatt Martin <wawowl@gmail.com> # WHW01 Tested-by: Tony Ambardar <itugrok@yahoo.com> # EA6350v3 Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
(cherry picked from commit 6fc334cbdc2b1716786768c545b761b338962b43)
Hauke Mehrtens [Sat, 31 Dec 2022 18:32:41 +0000 (19:32 +0100)]
treewide: Trigger reinstall of all wolfssl dependencies
The ABI of the wolfssl library changed a bit between version 5.5.3 and
5.5.4. This release update will trigger a rebuild of all packages which
are using wolfssl to make sure they are adapted to the new ABI.
Hauke Mehrtens [Thu, 29 Dec 2022 20:26:28 +0000 (21:26 +0100)]
mbedtls: update to version 2.28.2
Changelog: https://github.com/Mbed-TLS/mbedtls/releases/tag/v2.28.2
This release of Mbed TLS provides bug fixes and minor enhancements. This
release includes fixes for security issues.
Fixes the following CVEs:
* CVE-2022-46393: Fix potential heap buffer overread and overwrite in
DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and
MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX.
* CVE-2022-46392: An adversary with access to precise enough information
about memory accesses (typically, an untrusted operating system
attacking a secure enclave) could recover an RSA private key after
observing the victim performing a single private-key operation if the
window size used for the exponentiation was 3 or smaller.
$(STAGING_DIR_HOST)/bin/gzip is not available in openwrt-22.03. The
change broke the build because the build process could not find this
file. For example ath79/generic netgear_wndap360 was affected.
Stijn Tintel [Tue, 20 Dec 2022 18:04:53 +0000 (20:04 +0200)]
trusted-firmware-a.mk: use correct CPE ID
There are 2 different CPE IDs on the NVD website:
cpe:/a:arm:trusted_firmware-a
cpe:/o:arm:arm_trusted_firmware
The ID as currently used in trusted-firmware-a.mk does not exist. The
CPE ID using the arm_trusted_firmware product name only lists a few
records for versions 2.2 and 2.3 on the NVD site. The CPE ID using the
trusted_firmware-a product name lists many more records, and actually
has a CVE linked to it. Therefore, use the CPE ID using the
trusted_firmware-a product name.
ath79: image: don't depend on other COMPILE targets
A device COMPILE target should not depend on another COMPILE.
Otherwise race condition may happen.
The loader is very small. Compiling it twice shouldn't
have a huge impact.
Michael Pratt [Tue, 22 Nov 2022 00:37:39 +0000 (00:37 +0000)]
image: fix device profile specific COMPILE targets
Commit a01d23e75 ("image: always rebuild kernel loaders")
is a step in the right direction, but exposed some issues
and regressions in the makefile.
Some of the files made by device specific COMPILE targets
start with an "append" command (i.e. >> instead of > redirection)
and if the file already exists, the target file is the
input to itself before the first recipe-specified input.
To generate commitcount we use grep --max-count. This is not present on
alpine grep and cause wrong generation. Use -m as it's just the short
version of --max-count and more portable.
Hauke Mehrtens [Wed, 14 Dec 2022 15:29:16 +0000 (16:29 +0100)]
kernel: Make KERNEL_MAKEOPTS recursively expanded
KERNEL_MAKEOPTS will get expanded when it is used and not when it is
defined in the kernel.mk file now. This fixes problems finding dependent
kernel modules when it is used by a kernel module package.
Without this change the build of packages which depend on other out of
tree modules failed when they used KERNEL_MAKE because some symbols could
not be found. This happened because KERNEL_MAKE_FLAGS which contains a
"if $(__package_mk)" was evaluated where KERNEL_MAKEOPTS was defined
and not when the KERNEL_MAKE was used. For packages which included
kernel.mk before package.mk we saw this problem. One workaround
was to use the correct include order and the other one was to not
use KERNEL_MAKE_FLAGS, but copy its content.
Tony Butler [Fri, 9 Dec 2022 11:13:16 +0000 (03:13 -0800)]
lantiq: vr9: include usb driver for fritz 7430
Reported by user: missing driver for USB; add to image definition
https://github.com/openwrt/openwrt/issues/11326
Resolves: #11326
Signed-off-by: Tony Butler <spudz76@gmail.com> Acked-by: Aleksander Jan Bajkowski <olek2@wp.pl>
(cherry picked from commit 9a1ab8aa0398f93360bf54d81bcd332cd413c03f)
Hauke Mehrtens [Wed, 21 Dec 2022 13:25:46 +0000 (14:25 +0100)]
toolchain: Update glibc 2.34 to recent HEAD
This adds the following changes: a88f07f71f stdlib: Remove attr_write from mbstows if dst is NULL [BZ: 29265] 4bc889c01c stdlib: Fixup mbstowcs NULL __dst handling. [BZ #29279] 1fcc7bfee2 alpha: Fix generic brk system call emulation in __brk_call (bug 29490) 68507377f2 socket: Check lengths before advancing pointer in CMSG_NXTHDR 536ddc5c02 elf: Call __libc_early_init for reused namespaces (bug 29528) 2a44960cbc Apply asm redirections in stdio.h before first use [BZ #27087] b41c535f46 Apply asm redirections in wchar.h before first use 2b3d020055 nscd: Fix netlink cache invalidation if epoll is used [BZ #29415] bc5cb538e5 elf: Run tst-audit-tlsdesc, tst-audit-tlsdesc-dlopen everywhere 2ff6775ad3 elf: Fix hwcaps string size overestimation f50a6c843a gconv: Use 64-bit interfaces in gconv_parseconfdir (bug 29583) 1a3afdfe31 resolv: Add tst-resolv-byaddr for testing reverse lookup 6a833d798e resolv: Add tst-resolv-aliases 4d2e67d6e5 resolv: Add internal __res_binary_hnok function bb8adbba4f resolv: Add the __ns_samebinaryname function c288e032ae resolv: Add internal __ns_name_length_uncompressed function e7c03f4765 resolv: Add DNS packet parsing helpers geared towards wire format d9c979abf9 nss_dns: Split getanswer_ptr from getanswer_r 32e5db3768 nss_dns: Rewrite _nss_dns_gethostbyaddr2_r and getanswer_ptr 7267341ec1 nss_dns: Remove remnants of IPv6 address mapping 9abc40d9b5 nss_dns: Rewrite getanswer_r to match getanswer_ptr (bug 12154, bug 29305) c36e7cca35 nss_dns: In gaih_getanswer_slice, skip strange aliases (bug 12154) 480c820493 resolv: Add new tst-resolv-invalid-cname 2def56a349 nss_dns: Rewrite _nss_dns_gethostbyname4_r using current interfaces 044755e2fa resolv: Fix building tst-resolv-invalid-cname for earlier C standards a2e259014f Avoid extra load with CAS in __pthread_mutex_lock_full [BZ #28537] ed8300c054 Avoid extra load with CAS in __pthread_mutex_clocklock_common [BZ #28537] a6b81f605d Add LLL_MUTEX_READ_LOCK [BZ #28537] 6bcfbee727 Move assignment out of the CAS condition 43760d33d7 nptl: Effectively skip CAS in spinlock loop 04efdcfac4 sysdeps: Add 'get_fast_jitter' interace in fast-jitter.h ea69248445 nptl: Add backoff mechanism to spinlock loop 95f5089d4a x86: include BMI1 and BMI2 in x86-64-v3 level 414fc856ff x86-64: Require BMI2 for AVX2 str(n)casecmp implementations e1561d8cf0 x86-64: Require BMI2 for AVX2 strcmp implementation b9cbb8dd48 x86-64: Require BMI2 for AVX2 strncmp implementation 67e863742d x86-64: Require BMI2 for AVX2 wcs(n)cmp implementations 94b9c1b640 x86-64: Require BMI2 for AVX2 (raw|w)memchr implementations 36d6b9be3d x86-64: Require BMI2 and LZCNT for AVX2 memrchr implementation e570b865b5 x86-64: Require BMI1/BMI2 for AVX2 strrchr and wcsrchr implementations e3976287b2 nscd: Drop local address tuple variable [BZ #29607] c95ef423d7 nss: Implement --no-addrconfig option for getent 16c7ed6e68 nss: Fix tst-nss-files-hosts-long on single-stack hosts (bug 24816) d5313bcb7e nss: Use shared prefix in IPv4 address in tst-reload1 9f55d2e7c4 elf: Do not completely clear reused namespace in dlmopen (bug 29600) ca5df79545 linux: Fix generic struct_stat for 64 bit time (BZ# 29657) f42d871b22 Makerules: fix MAKEFLAGS assignment for upcoming make-4.4 [BZ# 29564] 675ba1f361 mktime: improve heuristic for ca-1986 Indiana DST 6e8044e910 Fix memmove call in vfprintf-internal.c:group_number 291d440206 Allow #pragma GCC in headers in conformtest 86a701a204 regex: copy back from Gnulib fa5044f1e3 regex: fix buffer read overrun in search [BZ#28470] 06afa5e09f io: Fix ftw internal realloc buffer (BZ #28126) deea6ab1bc io: Fix use-after-free in ftw [BZ #26779] d57cdc1b5a Linux: Support __IPC_64 in sysvctl *ctl command arguments (bug 29771) 75b0edb7ef Update NEWS file in the right place 691f70b84a elf: Fix rtld-audit trampoline for aarch64 e3255e7d21 x86: Fix wcsnlen-avx2 page cross length comparison [BZ #29591] 309c4708ac elf: Fix wrong fscanf usage on tst-pldd 42b9d7def8 Allow for unpriviledged nested containers 405b8ae135 elf: Fix wrong fscanf usage on tst-pldd a1c12fdf3f _Static_assert needs two arguments for compatibility with GCC before 9 a4217408a3 Apply asm redirections in syslog.h before first use [BZ #27087]
Jo-Philipp Wich [Thu, 15 Dec 2022 23:27:02 +0000 (00:27 +0100)]
rpcd: update to latest Git HEAD
7de4820 iwinfo: add "hwmodes_text" to the info output b3f530b iwinfo: clean up rpc_iwinfo_call_hw_ht_mode() c46ad61 iwinfo: reuse infos provided by libiwinfo 6c5e900 iwinfo: constify string map arg for rpc_iwinfo_call_int()
Jo-Philipp Wich [Thu, 15 Dec 2022 23:18:08 +0000 (00:18 +0100)]
iwinfo: update to latest Git HEAD
8d15809 cli: print current HT mode 8f86dd6 cli: use IWINFO_HTMODE_COUNT f36b72b cli: use IWINFO_KMGMT_NAMES 91be7e0 cli: use IWINFO_CIPHER_NAMES 49b6ec9 cli: fix printing the scan channel width b1c8873 cli: fix marking the active channel 9e14e64 utils: add iwinfo_band2ghz() and iwinfo_ghz2band() helpers e084781 utils: add helper functions to get names by values d09a77a utils: add iwinfo_htmode_is_{ht|vht|he} helpers 8752977 utils: add and use iwinfo_format_hwmodes() 02f433e lib: add IWINFO_80211_COUNT and IWINFO_80211_NAMES 1d30df1 lib: add IWINFO_BAND_COUNT and IWINFO_BAND_NAMES aefd0ef lib: use common IWINFO_CIPHER_NAMES strings a5b30de lib: add IWINFO_OPMODE_COUNT and use it for IWINFO_OPMODE_NAMES 9f29e79 lib: constify and fixup the string array definitions fddc015 nl80211: mark frequencies where HE operation in not allowed 6d50a7c nl80211: add support for HE htmodes 4ba5713 nl80211: properly get available bands for the hwmode 91b2ada nl80211: update the kernel header nl80211.h 3f619a5 nl80211: fix frequency/channel conversion for the 6G band a77d915 nl80211: don't guess if a name is an ifname c27ce71 devices: add usb device MediaTek MT7921AU 14f864e nl80211: add ability to describe USB devices a5a75fd nl80211: remove ancient wpa_supplicant ctrl socket path dd4e1ff nl80211: fix wpa supplicant ctrl socket permissions d638163 fix -Wdangling-else warnings 4aa6c5a fix -Wreturn-type warning 3112726 fix -Wpointer-sign warning ebd5f84 fix -Wmaybe-uninitialized warning 5469898 fix -Wunused-variable warnings 462b679 fix -Wduplicate-decl-specifier warnings ccaabb4 fix -Wformat-truncation warnings 50380db enable useful compiler warnings via -Wall
Felix Fietkau [Thu, 22 Sep 2022 13:23:54 +0000 (15:23 +0200)]
iwinfo: update to the latest version
46f04f3808e8 devices: add MediaTek MT7986 WiSoC b3e08c8b5a8f ops: make support for wireless extensions optional 1f695d9c7f82 nl80211: allow phy names that don't start with 'phy' b7f9f06e1594 nl80211: fix phy/netdev index lookup 4a43b0d40ba5 nl80211: look up the phy name instead of assuming name == phy<idx>
Stijn Tintel [Tue, 17 May 2022 17:50:31 +0000 (20:50 +0300)]
kernel: add missing symbol for bcm27xx
When KERNEL_PERF_EVENTS is enabled in OpenWrt, the RPI_AXIPERF symbol is
exposed. Add a build option for it to fix build failures with
KERNEL_PERF_EVENTS enabled.
Hauke Mehrtens [Sun, 7 Aug 2022 11:24:59 +0000 (13:24 +0200)]
kernel: kmod-net-rtl8192su: Remove package
The R8712U driver depends on cfg80211. cfg80211 is provided by mac80211
backports, we can not build any in kernel drivers which depend on
cfg80211 which is an out of tree module in OpenWrt.
The cfg80211 dependency was added with kernel 5.9.
We could add rtl8192su to backports and build it from there.
Martin Schiller [Wed, 2 Nov 2022 06:41:04 +0000 (07:41 +0100)]
kernel: further cleanup of xfrm[4|6]_mode*
In my commit da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_*
modules") I missed a few default config options and description entries.
Those should be gone as well.
Fixes: da5c45f4d886 ("kernel: remove handling of xfrm[4|6]_mode_* modules") Signed-off-by: Martin Schiller <ms@dev.tdt.de>
(cherry picked from commit 1e028ac51e4d033cc1a8a06850ca8c6469206761)
Add package supporting Bluetooth HCI interfaces connected over SDIO.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
[pepe2k@gmail.com: dropped rfkill dependency, other minor text fixes] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
(cherry picked from commit fb7547684538e5501c4b91ed62e5f66832e4d9bc)
David Bauer [Fri, 9 Dec 2022 00:58:03 +0000 (01:58 +0100)]
ath79: fix Teltonika RUT230 v1 MAC assignment
The MAC-Address setup for the Teltonika RUT230 v1 was swapped for the
LAN / WAN ports. Also the Label-MAC was assigned incorrect, as the WiFi
MAC is printed on the case as part of the SSID, however only the LAN
MAC-Address is designated as a MAC-Address.
Wavlink WS-WN572HP3 4G is an 802.11ac
dual-band outdoor router with LTE support.
Specifications;
* Soc: MT7621DAT
* RAM: 128MiB
* Flash: NOR 16MiB GD-25Q128ESIG3
* Wi-Fi:
* MT7613BEN: 5GHz
* MT7603EN: 2.4GHz
* Ethernet: 2x 1GbE
* USB: None - only used internally
* LTE Modem: Quectel EC200T-EU
* UART: 115200 baud
* LEDs:
* 7 blue at the front
* 1 Power
* 2 LAN / WAN
* 1 Status
* 3 RSSI (annotated 4G)
* 1 green at the bottom (4G LED)
* Buttons: 1 reset button
Installation:
* press and hold the reset button while powering on the device
* keep it pressed for ten seconds
* connect to 192.168.10.1 via webbrowser (chromium/chrome works, at
least Firefox 106.0.3 does not)
* upload the sysupgrade image, confirm the checksum, wait 2 minutes
until the device reboots
Revert to stock firmware:
* same as installation but use the recovery image for WL-WN572HP3
Hauke Mehrtens [Thu, 8 Dec 2022 00:15:11 +0000 (01:15 +0100)]
ustream-ssl: update to Git version 2022-12-07
9217ab4 ustream-openssl: Disable renegotiation in TLSv1.2 and earlier 2ce1d48 ci: fix building with i.MX6 SDK 584f1f6 ustream-openssl: wolfSSL: provide detailed information in debug builds aa8c48e cmake: add a possibility to set library version
CI: build: skip sdk adapt to external toolchain on cache hit
On cache hit, skip sdk adapt to external toolchain. This is needed because we
cache the already extracted sdk and that is already adapted to be used
as external toolchain.
Rerunning the adap step will result in the test to fail for missing file
as the file are already got wrapped to the external toolchain format.
Fixes: 42f0ab028e2e ("CI: build: fix use of sdk as toolchain") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 99eaedfe3966b1ca812e8a962197cf91286247f7)
The toolchain included in a sdk have a different format than an external
toolchain tar.
Since sdk is a more integrated setup doesn't use and include wrapper bin
that use the external toolchain config and use an alternative and more
standard way to include all the toolchain headers.
External toolchain use wrapper.sh to append the configured include
header when each tool is called.
Fix the sdk toolchain by reverting their own sdk wrapper scripts and to
simulate an external toolchain build copying what is done in the
toolchain target makefile.
This handle compilation error and warning caused by not using fortify
header on building packages.
Fixes: 006e52545d14 ("CI: build: add support to fallback to sdk for external toolchain") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 42f0ab028e2eae0d4e7acf9db7fd68b256f23503)
Hauke Mehrtens [Mon, 5 Dec 2022 23:17:35 +0000 (00:17 +0100)]
e2fsprogs: Fix CVE-2022-1304
This fixes CVE-2022-1304:
An out-of-bounds read/write vulnerability was found in e2fsprogs 1.46.5.
This issue leads to a segmentation fault and possibly arbitrary code
execution via a specially crafted filesystem.
Hannu Nyman [Tue, 6 Dec 2022 08:36:56 +0000 (10:36 +0200)]
mvebu: disable also wrt32x due to broken switch
WRT32x has identical hardware as WRT3200ACM,
so handle the devices identically.
Reference to:
* FCC approval: WRT32x is a new name for WRT3200ACM hardware
https://fccid.io/Q87-WRT3200ACM#Grant-TCB-5
FCC IDENTIFIER: | Q87-WRT3200ACM
C2PC: - Adding a new model name: WRT32X;
* Linux switch definition:
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=2716777b4f21649fb907b4a4fb96e1c8d0a5ec16
MV88E6176 is mostly compatible to MV88E6352 and is documented
in the same functional specification. Add support for it.
Fixes: a0bae2fef8 "mvebu: cortexa9: disable devices using broken mv88e6176 switch" Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Catalin Toda [Fri, 15 Jul 2022 17:18:23 +0000 (10:18 -0700)]
kernel: netconsole: add network console logging support
Accessing the console on many devices is difficult.
netconsole eases debugging on devices that crash
after the network is up.
Reference to the netconsole documentation in upstream Linux:
<https://www.kernel.org/doc/html/latest/networking/netconsole.html>
|
|netconsole=[+][src-port]@[src-ip]/[<dev>],[tgt-port]@<tgt-ip>/[tgt-macaddr]
|
| where
| + if present, enable extended console support
| src-port source for UDP packets (defaults to 6665)
| src-ip source IP to use (interface address)
| dev network interface (eth0)
| tgt-port port for logging agent (6666)
| tgt-ip IP address for logging agent
| tgt-macaddr ethernet MAC address for logging agent (broadcast)
OpenWrt specific notes:
OpenWrt's device userspace scripts are attaching the network
interface (i.e. eth0) to a (virtual) bridge (br-lan) device.
This will cause netconsole to report:
|network logging stopped on interface eth0 as it is joining a master device
(and unfortunately the traffic/logs to stop at this point)
As a workaround, the netconsole module can be manually loaded
again after the bridge has been setup with:
One way of catching errors before the handoff, try to
append the /etc/modules.conf file with the following extra line:
options netconsole netconsole=@/eth0,@192.168.1.x/MA:C...
and install the kmod-netconsole (=y) into the base image.
Signed-off-by: Catalin Toda <catalinii@yahoo.com>
(Added commit message from PR, added links to documentation) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
(cherry picked from commit 488b25f5ac5028923f67e3beade92dab0c2591f1)
Hauke Mehrtens [Sun, 7 Aug 2022 11:32:31 +0000 (13:32 +0200)]
kernel: kmod-w1-slave-ds2760: Remove package
The w1_ds2760.ko driver was merged into the ds2760_battery.ko driver.
The driver was removed and this package was never build any more.
This happened with kernel 4.19.
Petr Štetiar [Thu, 1 Dec 2022 09:36:01 +0000 (10:36 +0100)]
mvebu: cortexa9: disable devices using broken mv88e6176 switch
Several users have reported, that devices using mv88e6176 switch are
seriously broken, basically turning that switch into a hub. Until fixed
those devices should be disabled.
I've used TOH with "Switch 88E6176" filter, which provided me with the
following list of likely affected devices:
* Linksys WRT1200AC v1/v2, WRT1900AC v1/v2
* SolidRun ClearFog Pro
* Turris Omnia
That device list more or less corresponds with the list of devices
mentioned in the linked bug reports.
References: https://github.com/openwrt/openwrt/issues/11077 Signed-off-by: Petr Štetiar <ynezz@true.cz>
CI: build: fix matching for openwrt release branch for toolchain parsing
The current match logic doesn't handle test for push events related to
stable release (example openwrt-22.03) but only fork with the related
prefix (example openwrt-22.03-fixup)
Fix wrong matching and while at it also add extra checks to other
matching (check if the branch name actually start with the requested
prefix)
Fixes: e24a1e6f6d7f ("CI: build: add support for external toolchains from stable branch") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit e3cf2b84e5f8708ca17d931ef60746516c8a2fe4)
CI: fix matching for openwrt release branch for container selection
The current match logic doesn't handle test for push events related to
stable release (example openwrt-22.03) but only fork with the related
prefix (example openwrt-22.03-fixup)
Fix wrong matching and while at it also add extra checks to other
matching (check if the branch name actually start with the requested
prefix)
Fixes: abe8a4824210 ("CI: build: add support for per branch tools container") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 65c3d19c4b28ccac0d08d916de0ffa4c0e7b3dc2)
Add support to push per branch container tools.
For anything not official stick to latest tag that correspond to test
run from master.
If we are testing something for one of the openwrt stable branch, parse
the branch name or the tag and push dedicated tools containers.
To use the stable container for local testing the branch needs to have
the prefix openwrt-[0-9][0-9].[0-9][0-9] (example openwrt-21.02-fixup)
Any branch that will match this pattern openwrt-[0-9][0-9].[0-9][0-9]
will refresh the tools container with the matching tag.
(example branch openwrt-22.03 -> tools:openwrt-22.03)
(example branch openwrt-22.03-test -> tools:openwrt-22.03)
Hauke Mehrtens [Sat, 3 Dec 2022 02:04:40 +0000 (03:04 +0100)]
CI: Build all boards and testing kernel
This adds options to build all boards of a selected target and an
additional option to build the testing kernel instead of the normal
kernel. This can be used by other trigger work flows.
Hauke Mehrtens [Sat, 5 Nov 2022 13:27:11 +0000 (14:27 +0100)]
CI: Allow building with internal toolchain
This adds an option to build with internal toolchain. This can be used
to build targets which are currently not build by the OpenWrt build bots
and which needs their own toolchain build for every build.
Building the toolchain takes about 30 minutes compared to using the
external toolchain which takes some seconds.
Hauke Mehrtens [Tue, 1 Nov 2022 18:10:01 +0000 (19:10 +0100)]
CI: Extract the OpenWrt building to own sub workflow
Extract the building of OpenWrt into an own workflow which is then
triggered by the kernel.yml and packages.yml workflow with different
inputs. This allows us to share much of the code of the workflow.
Hauke Mehrtens [Sun, 7 Aug 2022 16:46:11 +0000 (18:46 +0200)]
CI: packages: Add github CI job to build all packages
This will build OpenWrt for MIPS malta BE and x86 64 Bit with all
packages and kernel modules activated. It is triggered when something
changes in the build system or when a package definition is changed.
This task probably needs 90 minutes to execute, but I hope that it
will find build problems in pull requests early.
This intentionally does not activate the feeds, because building them
too would take too long. We only build x86/64 and malta/be to save
resources.
I would like to detect build problems when a package is changed. We
often had build breaks when a package version was increased sometime
even in other packages which used it as a dependency.
This is based on the .github/workflows/packages.yml workflow.
To actually use ccache cache on kernel test from pr, the kernel workflow
has to be run first from a push action.
This will permit as a side effect to test merged commits and catch commit
that may cause regression in kernel compilation even outside the github
system.
Alex Low [Mon, 19 Sep 2022 10:20:37 +0000 (12:20 +0200)]
build: harden GitHub workflow permissions
Grant pull-requests write permission to the labeler workflow and
read-only to everything else.
Signed-off-by: Alex Low <aleksandrosansan@gmail.com>
[ wrap to 80 columns and fix wrong author as requested by author itself ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 715259940776843d8799bc39de8eb50eb764189b)
Use ccache to speedup kernel compilation.
Ccache dir is cached across each build test. To refresh ccache directory
we generate an hash of the kernel include files, that includes the
kernel versions of every kernel supported and the kernel compile
includes.
Currently each Kernel compilation takes about 30 minutes of which 20
minutes are used to compile our tools. While the toolchain is downloaded
and instantly ready the tools are missing.
This commit starts uploading a Docker container including compiled tools
which are ready to use. It is automatically updated whenever any tools
are changed.
Signed-off-by: Paul Spooren <mail@aparcar.org> Co-Developed-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 25b65f548dfd93cae87781276bfff9a27cd3ebd4)
Paul Spooren [Sun, 20 Mar 2022 20:02:08 +0000 (20:02 +0000)]
CI: use buildbot container for building
Instead of using a fresh Linux installation which is setup every time
use the Buildbot container which is used for our own Buildbot
infrastructure, too.
While at it also tidy up the workflow to make it more consistent with
other workflow.
Signed-off-by: Paul Spooren <mail@aparcar.org> Co-Developed-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 3b23227d43ec720f810e6e261945530f7bc549f0)
Petr Štetiar [Mon, 22 Aug 2022 13:05:01 +0000 (15:05 +0200)]
ci: show build failures directly in job log output
Instead of waiting for complete workflow finish, then downloading the
artifacts, unpacking them and inspecting them, lets try to make the
build failure immediately visible in the log output:
====== Make errors from logs/target/linux/compile.txt ======
* Legacy (non-UHI/non-FIT) Boards
*
Support MIPS SEAD-3 boards (LEGACY_BOARD_SEAD3) [N/y/?] (NEW)
Error in reading or end of file.
projects / thirdparty / openwrt.git / log
