tty: hvc: dcc: Bind driver to CPU core0 for reads and writes
Some external debuggers do not handle reads/writes from/to DCC
on secondary cores. Each core has its own DCC device registers,
so when a core reads or writes from/to DCC, it only accesses
its own DCC device. Since kernel code can run on any core,
every time the kernel wants to write to the console, it might
write to a different DCC.
In SMP mode, external debugger creates multiple windows, and
each window shows the DCC output only from that core's DCC.
The result is that console output is either lost or scattered
across windows.
Selecting this debug option will enable code that serializes all
console input and output to core 0. The DCC driver will create
input and output FIFOs that all cores will use. Reads and writes
from/to DCC are handled by a workqueue that runs only core 0.
This is a debug feature to be used only in early stage development
where debug serial console support would not be present. It disables
PM feature like CPU hotplug and is not suitable for production
environment.
Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org> Acked-by: Adam Wallis <awallis@codeaurora.org> Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Elliot Berman <eberman@codeaurora.org> Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Link: https://lore.kernel.org/r/20220428090858.14489-1-quic_saipraka@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilpo Järvinen [Wed, 4 May 2022 07:20:46 +0000 (10:20 +0300)]
termbits: Convert octal defines to hex
Many archs have termbits.h as octal numbers. It makes hard for humans
to parse the magnitude of large numbers correctly and to compare with
hex ones of the same define.
Convert octal values to hex.
First step is an automated conversion with:
for i in $(git ls-files | grep 'termbits\.h'); do
awk --non-decimal-data '/^#define\s+[A-Z][A-Z0-9]*\s+0[0-9]/ {
l=int(((length($3) - 1) * 3 + 3) / 4);
repl = sprintf("0x%0" l "x", $3);
print gensub(/[^[:blank:]]+/, repl, 3);
next} {print}' $i > $i~;
mv $i~ $i;
done
On top of that, some manual processing on alignment and number of zeros.
In addition, small tweaks to formatting of a few comments on the same
lines.
Jiri Slaby [Tue, 3 May 2022 08:08:04 +0000 (10:08 +0200)]
serial: pch: decomission pch_uart_hal_write()
It's horrid and if we inline it into callers, we can get rid of a lot of
sugar around.
So:
* x_char handling becomes a single iowrite8.
* xmit->buf handling is a single loop simply writing characters one by
one directly from the buf instead of complex cnt_to_end computations.
Until the buf is empty or fifo size is reached.
Jiri Slaby [Tue, 3 May 2022 08:08:03 +0000 (10:08 +0200)]
serial: pch: don't overwrite xmit->buf[0] by x_char
When x_char is to be sent, the TX path overwrites whatever is in the
circular buffer at offset 0 with x_char and sends it using
pch_uart_hal_write(). I don't understand how this was supposed to work
if xmit->buf[0] already contained some character. It must have been
lost.
Remove this whole pop_tx_x() concept and do the work directly in the
callers. (Without printing anything using dev_dbg().)
Jiri Slaby [Tue, 3 May 2022 08:06:07 +0000 (10:06 +0200)]
serial: pch: move size check from pop_tx one level up
'count' is zero in the pop_tx()'s comparison against 'size'. So the 'if'
tries to find out if 'size' is negative or zero and returns in that
case. But it cannot be negative, due to previous (size < 0) check in the
caller: handle_tx().
So simply move this check from pop_tx() to handle_tx(). Now it's clear
that pop_tx() is called only if fifo_size is non-zero.
Jiri Slaby [Tue, 3 May 2022 06:31:22 +0000 (08:31 +0200)]
serial: pic32: restore disabled irqs in pic32_uart_startup()
pic32_uart_startup() disables interrupts by local_irq_save(). But the
function never enables them. The serial core only holds a mutex, so irqs
are not restored.
So how could this driver work? This irq handling was already present in
the driver's initial commit 157b9394709ed (serial: pic32_uart: Add PIC32
UART driver).
So is it a candidate for removal? Anyone has a contact to the author:
Andrei Pistirica (I believe the one below -- @microchip.com -- will
bounce)? Or to someone else @microchip.com?
Jiri Slaby [Tue, 3 May 2022 06:31:21 +0000 (08:31 +0200)]
serial: pic32: free up irq names correctly
struct pic32_sport contains built-up names for irqs. These are freed
only in error path of pic32_uart_startup(). And even there, the freeing
happens before free_irq().
So fix this by:
* moving frees after free_irq(), and
* add frees to pic32_uart_shutdown() -- the opposite of
pic32_uart_startup().
Jiri Slaby [Tue, 3 May 2022 06:31:18 +0000 (08:31 +0200)]
serial: pic32: convert to_pic32_sport() to an inline
'c' is not in wrapped in parentheses in the to_pic32_sport() macro, so
it might be problematic wrt macro expansion. Using an inline is always
safer in these cases. Both type-wise and macro-expansion-wise. So switch
the macro to an inline.
Jiri Slaby [Tue, 3 May 2022 06:31:17 +0000 (08:31 +0200)]
serial: pic32: remove pic32_get_port() macro
It's just &sport->port. First, sport was not in parenthesis, so macro
expansion could be an issue. Second, it's so simple, that we can expand
the macro and make the code really straightforward.
Jiri Slaby [Tue, 3 May 2022 06:31:15 +0000 (08:31 +0200)]
serial: pic32: simplify clk handling
struct pic32_sport::ref_clk is only set, but not read. That means we can
remove it. And when we do so, pic32_enable_clock() and
pic32_disable_clock() are simple wrappers around clk_prepare_enable()
and clk_disable_unprepare() respectively. So we can remove the former
two from the code and replace it by the latter two.
Marek Vasut [Sat, 30 Apr 2022 16:28:45 +0000 (18:28 +0200)]
serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode
In case the RS485 mode is emulated using GPIO RTS, use the TC interrupt
to deassert the GPIO RTS, otherwise the GPIO RTS stays asserted after a
transmission ended and the RS485 cannot work.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Erwan Le Ray <erwan.leray@foss.st.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jean Philippe Romain <jean-philippe.romain@foss.st.com> Cc: Valentin Caron <valentin.caron@foss.st.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-serial@vger.kernel.org Link: https://lore.kernel.org/r/20220430162845.244655-2-marex@denx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `clkin_rate' member of `struct sifive_serial_port' now duplicates
`uartclk' from nested `struct uart_port', so use `uartclk' throughout
and remove `clkin_rate'.
serial: sifive: Report actual baud base rather than fixed 115200
The base baud value reported is supposed to be the highest baud rate
that can be set for a serial port. The SiFive FU740-C000 SOC's on-chip
UART supports baud rates of up to 1/16 of the input clock rate, which is
the bus clock `tlclk'[1], often at 130MHz in the case of the HiFive
Unmatched board.
However the sifive UART driver reports a fixed value of 115200 instead:
10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 115200) is a SiFive UART v0 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 115200) is a SiFive UART v0
even though we already support setting higher baud rates, e.g.:
$ tty
/dev/ttySIF1
$ stty speed
230400
The baud base value is computed by the serial core by dividing the UART
clock recorded in `struct uart_port' by 16, which is also the minimum
value of the clock divider supported, so correct the baud base value
reported by setting the UART clock recorded to the input clock rate
rather than 115200:
10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 8125000) is a SiFive UART v0 10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 8125000) is a SiFive UART v0
serial: 8250: Add proper clock handling for OxSemi PCIe devices
Oxford Semiconductor PCIe (Tornado) 950 serial port devices are driven
by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock.
We currently drive the device using its default oversampling rate of 16
and the clock prescaler disabled, consequently yielding the baud base of 3906250. This base is inadequate for some of the high-speed baud rates
such as 460800bps, for which the closest rate possible can be obtained
by dividing the baud base by 8, yielding the baud rate of 488281.25bps,
which is off by 5.9638%. This is enough for data communication to break
with the remote end talking actual 460800bps, where missed stop bits
have been observed.
We can do better however, by taking advantage of a reduced oversampling
rate, which can be set to any integer value from 4 to 16 inclusive by
programming the TCR register, and by using the clock prescaler, which
can be set to any value from 1 to 63.875 in increments of 0.125 in the
CPR/CPR2 register pair. The prescaler has to be explicitly enabled
though by setting bit 7 in the MCR or otherwise it is bypassed (in the
enhanced mode that we enable) as if the value of 1 was used.
Make use of these features then as follows:
- Set the baud base to 15625000, reflecting the minimum oversampling
rate of 4 with the clock prescaler and divisor both set to 1.
- Override the `set_mctrl' and set the MCR shadow there so as to have
MCR[7] always set and have the 8250 core propagate these settings.
- Override the `get_divisor' handler and determine a good combination of
parameters by using a lookup table with predetermined value pairs of
the oversampling rate and the clock prescaler and finding a pair that
divides the input clock such that the quotient, when rounded to the
nearest integer, deviates the least from the exact result. Calculate
the clock divisor accordingly.
Scale the resulting oversampling rate (only by powers of two) if
possible so as to maximise it, reducing the divisor accordingly, and
avoid a divisor overflow for very low baud rates by scaling the
oversampling rate and/or the prescaler even if that causes some
accuracy loss.
Also handle the historic spd_cust feature so as to allow one to set
all the three parameters manually to arbitrary values, by keeping the
low 16 bits for the divisor and then putting TCR in bits 19:16 and
CPR/CPR2 in bits 28:20, sanitising the bit pattern supplied such as
to clamp CPR/CPR2 values between 0.000 and 0.875 inclusive to 33.875.
This preserves compatibility with any existing setups, that is where
requesting a custom divisor that only has any bits set among the low
16 the oversampling rate of 16 and the clock prescaler of 33.875 will
be used as with the original 8250.
Finally abuse the `frac' argument to store the determined bit patterns
for the TCR, CPR and CPR2 registers.
- Override the `set_divisor' handler so as to set the TCR, CPR and CPR2
registers from the `frac' value supplied. Set the divisor as usual.
With the baud base set to 15625000 and the unsigned 16-bit UART_DIV_MAX
limitation imposed by `serial8250_get_baud_rate' standard baud rates
below 300bps become unavailable in the regular way, e.g. the rate of
200bps requires the baud base to be divided by 78125 and that is beyond
the unsigned 16-bit range. The historic spd_cust feature can still be
used to obtain such rates if so required.
See Documentation/tty/device_drivers/oxsemi-tornado.rst for more details.
serial: 8250: Export ICR access helpers for internal use
Make ICR access helpers available outside 8250_port.c, however retain
them as ordinary static functions so as not to regress code generation.
This is because `serial_icr_write' is currently automatically inlined by
GCC, however `serial_icr_read' is not. Making them both static inline
would grow code produced, e.g.:
$ i386-linux-gnu-size --format=gnu 8250_port-{old,new}.o
text data bss total filename
15065 3378 0 18443 8250_port-old.o
15289 3378 0 18667 8250_port-new.o
and:
$ riscv64-linux-gnu-size --format=gnu 8250_port-{old,new}.o
text data bss total filename
16980 5306 0 22286 8250_port-old.o
17124 5306 0 22430 8250_port-new.o
while making them external would needlessly add a new module interface
and lose the benefit from `serial_icr_write' getting inlined outside
8250_port.o.
serial: 8250: Fold EndRun device support into OxSemi Tornado code
The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and uses the same sequence to determine the
number of ports available. Despite that we have duplicate code
specific to the EndRun device.
Remove redundant code then and factor out OxSemi Tornado device
detection.
Linus Torvalds [Sun, 1 May 2022 18:49:32 +0000 (11:49 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Take care of faults occuring between the PARange and IPA range by
injecting an exception
- Fix S2 faults taken from a host EL0 in protected mode
- Work around Oops caused by a PMU access from a 32bit guest when PMU
has been created. This is a temporary bodge until we fix it for
good.
x86:
- Fix potential races when walking host page table
- Fix shadow page table leak when KVM runs nested
- Work around bug in userspace when KVM synthesizes leaf 0x80000021
on older (pre-EPYC) or Intel processors
Generic (but affects only RISC-V):
- Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: work around QEMU issue with synthetic CPUID leaves
Revert "x86/mm: Introduce lookup_address_in_mm()"
KVM: x86/mmu: fix potential races when walking host page table
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
KVM: arm64: Inject exception on out-of-IPA-range translation fault
KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not set
KVM: arm64: Handle host stage-2 faults from 32-bit EL0
Linus Torvalds [Sun, 1 May 2022 17:03:36 +0000 (10:03 -0700)]
Merge tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to
restore the microcode-emulated MSRs but we thought wrong. So there's
a fix for that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
* tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
bug: Have __warn() prototype defined unconditionally
x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config
objtool: Use offstr() to print address of missing ENDBR
objtool: Print data address for "!ENDBR" data warnings
x86/xen: Add ANNOTATE_NOENDBR to startup_xen()
x86/uaccess: Add ENDBR to __put_user_nocheck*()
x86/retpoline: Add ANNOTATE_NOENDBR for retpolines
x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline
objtool: Enable unreachable warnings for CLANG LTO
x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE
x86,objtool: Mark cpu_startup_entry() __noreturn
x86,xen,objtool: Add UNWIND hint
lib/strn*,objtool: Enforce user_access_begin() rules
MAINTAINERS: Add x86 unwinding entry
x86/unwind/orc: Recheck address range after stack info was updated
x86/cpu: Load microcode during restore_processor_state()
x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
Linus Torvalds [Sun, 1 May 2022 16:34:54 +0000 (09:34 -0700)]
Merge tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
"A bunch of objtool fixes to improve unwinding, sibling call detection,
fallthrough detection and relocation handling of weak symbols when the
toolchain strips section symbols"
* tag 'objtool_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix code relocs vs weak symbols
objtool: Fix type of reloc::addend
objtool: Fix function fallthrough detection for vmlinux
objtool: Fix sibling call detection in alternatives
objtool: Don't set 'jump_dest' for sibling calls
x86/uaccess: Don't jump between functions
Linus Torvalds [Sun, 1 May 2022 16:30:47 +0000 (09:30 -0700)]
Merge tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Fix locking when accessing device MSI descriptors
* tag 'irq_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bus: fsl-mc-msi: Fix MSI descriptor mutex lock for msi_first_desc()
Merge tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and kernfs fixes for some reported
problems. They include:
- kernfs regression that is causing oopses in 5.17 and newer releases
- topology sysfs fixes for a few small reported problems.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: fix NULL dereferencing in kernfs_remove
topology: Fix up build warning in topology_is_visible()
arch_topology: Do not set llc_sibling if llc_id is invalid
topology: make core_mask include at least cluster_siblings
topology/sysfs: Hide PPIN on systems that do not support it.
Merge tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.18-rc5 for some
reported issues and new quirks. They include:
- dwc3 driver fixes
- xhci driver fixes
- typec driver fixes
- new usb-serial driver ids
- added new USB devices to existing quirk tables
- other tiny fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
usb: phy: generic: Get the vbus supply
usb: dwc3: gadget: Return proper request status
usb: dwc3: pci: add support for the Intel Meteor Lake-P
usb: dwc3: core: Only handle soft-reset in DCTL
usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
usb: misc: eud: Fix an error handling path in eud_probe()
usb: core: Don't hold the device lock while sleeping in do_proc_control()
usb: dwc3: Try usb-role-switch first in dwc3_drd_init
usb: dwc3: core: Fix tx/rx threshold settings
usb: mtu3: fix USB 3.0 dual-role-switch from device to host
xhci: Enable runtime PM on second Alderlake controller
usb: dwc3: fix backwards compat with rockchip devices
dt-bindings: usb: samsung,exynos-usb2: add missing required reg
usb: misc: fix improper handling of refcount in uss720_probe()
USB: Fix ehci infinite suspend-resume loop issue in zhaoxin
usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constant
usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLY
usb: typec: ucsi: Fix role swapping
usb: typec: ucsi: Fix reuse of completion structure
usb: xhci: tegra:Fix PM usage reference leak of tegra_xusb_unpowergate_partitions
...
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fix from James Bottomley:
"One fix for an endless error loop with the target driver affecting
tapes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: pscsi: Set SCF_TREAT_READ_AS_NORMAL flag only if there is valid data
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A semi-large pile of clk driver fixes this time around.
Nothing is touching the core so these fixes are fairly well contained
to specific devices that use these clk drivers.
- Some Allwinner SoC fixes to gracefully handle errors and mark an
RTC clk as critical so that the RTC keeps ticking.
- Fix AXI bus clks and RTC clk design for Microchip PolarFire SoC
driver introduced this cycle. This has some devicetree bits acked
by riscv maintainers. We're fixing it now so that the prior
bindings aren't released in a major kernel version.
- Remove a reset on Microchip PolarFire SoCs that broke when enabling
CONFIG_PM.
- Set a min/max for the Qualcomm graphics clk. This got broken by the
clk rate range patches introduced this cycle"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
clk: sunxi-ng: sun6i-rtc: Mark rtc-32k as critical
riscv: dts: microchip: reparent mpfs clocks
clk: microchip: mpfs: add RTCREF clock control
clk: microchip: mpfs: re-parent the configurable clocks
dt-bindings: rtc: add refclk to mpfs-rtc
dt-bindings: clk: mpfs: add defines for two new clocks
dt-bindings: clk: mpfs document msspll dri registers
riscv: dts: microchip: fix usage of fic clocks on mpfs
clk: microchip: mpfs: mark CLK_ATHENA as critical
clk: microchip: mpfs: fix parents for FIC clocks
clk: qcom: clk-rcg2: fix gfx3d frequency calculation
clk: microchip: mpfs: don't reset disabled peripherals
clk: sunxi-ng: fix not NULL terminated coccicheck error
Merge tag 'block-5.18-2022-04-29' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Revert of a patch that caused timestamp issues (Tejun)
- iocost warning fix (Tejun)
- bfq warning fix (Jan)
* tag 'block-5.18-2022-04-29' of git://git.kernel.dk/linux-block:
bfq: Fix warning in bfqq_request_over_limit()
Revert "block: inherit request start time from bio for BLK_CGROUP"
iocost: don't reset the inuse weight of under-weighted debtors
Merge tag 'io_uring-5.18-2022-04-29' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Pretty boring:
- three patches just adding reserved field checks (me, Eugene)
- Fixing a potential regression with IOPOLL caused by a block change
(Joseph)"
Boring is good.
* tag 'io_uring-5.18-2022-04-29' of git://git.kernel.dk/linux-block:
io_uring: check that data field is 0 in ringfd unregister
io_uring: fix uninitialized field in rw io_kiocb
io_uring: check reserved fields for recv/recvmsg
io_uring: check reserved fields for send/sendmsg
Merge tag 'random-5.18-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- Eric noticed that the memmove() in crng_fast_key_erasure() was bogus,
so this has been changed to a memcpy() and the confusing situation
clarified with a detailed comment.
- [Half]SipHash documentation updates from Bagas and Eric, after Eric
pointed out that the use of HalfSipHash in random.c made a bit of the
text potentially misleading.
* tag 'random-5.18-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
Documentation: siphash: disambiguate HalfSipHash algorithm from hsiphash functions
Documentation: siphash: enclose HalfSipHash usage example in the literal block
Documentation: siphash: convert danger note to warning for HalfSipHash
random: document crng_fast_key_erasure() destination possibility
Merge tag 'ceph-for-5.18-rc5' of https://github.com/ceph/ceph-client
Pull ceph client fixes from Ilya Dryomov:
"A fix for a NULL dereference that turns out to be easily triggerable
by fsync (marked for stable) and a false positive WARN and snap_rwsem
locking fixups"
* tag 'ceph-for-5.18-rc5' of https://github.com/ceph/ceph-client:
ceph: fix possible NULL pointer dereference for req->r_session
ceph: remove incorrect session state check
ceph: get snap_rwsem read lock in handle_cap_export for ceph_add_cap
libceph: disambiguate cluster/pool full log message
Revert "arm: dts: at91: Fix boolean properties with values"
This reverts commit 0dc23d1a8e17, which caused another regression
as the pinctrl code actually expects an integer value of 0 or 1
rather than a simple boolean property.
Paolo Bonzini [Fri, 29 Apr 2022 18:43:04 +0000 (14:43 -0400)]
KVM: x86: work around QEMU issue with synthetic CPUID leaves
Synthesizing AMD leaves up to 0x80000021 caused problems with QEMU,
which assumes the *host* CPUID[0x80000000].EAX is higher or equal
to what KVM_GET_SUPPORTED_CPUID reports.
This causes QEMU to issue bogus host CPUIDs when preparing the input
to KVM_SET_CPUID2. It can even get into an infinite loop, which is
only terminated by an abort():
cpuid_data is full, no space for cpuid(eax:0x8000001d,ecx:0x3e)
To work around this, only synthesize those leaves if 0x8000001d exists
on the host. The synthetic 0x80000021 leaf is mostly useful on Zen2,
which satisfies the condition.
Fixes: f144c49e8c39 ("KVM: x86: synthesize CPUID leaf 0x80000021h if useful") Reported-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- ARM SPE (Statistical Profiling Extensions) address fixes, for
synthesized events and for SPE events with physical addresses. Add a
simple 'perf test' entry to make sure this doesn't regress.
- Remove arch specific processing of kallsyms data to fixup symbol end
address, fixing excessive memory consumption in the annotation code.
* tag 'perf-tools-fixes-for-v5.18-2022-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf symbol: Remove arch__symbols__fixup_end()
perf symbol: Update symbols__fixup_end()
perf symbol: Pass is_kallsyms to symbols__fixup_end()
perf test: Add perf_event_attr test for Arm SPE
perf arm-spe: Fix SPE events with phys addresses
perf arm-spe: Fix addresses of synthesized SPE events
perf intel-pt: Fix timeless decoding with perf.data directory
Merge tag 'riscv-for-linus-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to properly ensure a single CPU is running during patch_text().
- A defconfig update to include RPMSG_CTRL when RPMSG_CHAR was set,
necessary after a recent refactoring.
* tag 'riscv-for-linus-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: configs: Configs that had RPMSG_CHAR now get RPMSG_CTRL
riscv: patch_text: Fixup last cpu should be master
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"Rename and reallocate the PT_ARM_MEMTAG_MTE ELF segment type.
This is a fix to the MTE ELF ABI for a bug that was added during the
most recent merge window as part of the coredump support.
The issue is that the value assigned to the new PT_ARM_MEMTAG_MTE
segment type has already been allocated to PT_AARCH64_UNWIND by the
ELF ABI, so we've bumped the value and changed the name of the
identifier to be better aligned with the existing one"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
elf: Fix the arm64 MTE ELF segment name and value
Drop lookup_address_in_mm() now that KVM is providing it's own variant
of lookup_address_in_pgd() that is safe for use with user addresses, e.g.
guards against page tables being torn down. A variant that provides a
non-init mm is inherently dangerous and flawed, as the only reason to use
an mm other than init_mm is to walk a userspace mapping, and
lookup_address_in_pgd() does not play nice with userspace mappings, e.g.
doesn't disable IRQs to block TLB shootdowns and doesn't use READ_ONCE()
to ensure an upper level entry isn't converted to a huge page between
checking the PAGE_SIZE bit and grabbing the address of the next level
down.
KVM: x86/mmu: fix potential races when walking host page table
KVM uses lookup_address_in_mm() to detect the hugepage size that the host
uses to map a pfn. The function suffers from several issues:
- no usage of READ_ONCE(*). This allows multiple dereference of the same
page table entry. The TOCTOU problem because of that may cause KVM to
incorrectly treat a newly generated leaf entry as a nonleaf one, and
dereference the content by using its pfn value.
- the information returned does not match what KVM needs; for non-present
entries it returns the level at which the walk was terminated, as long
as the entry is not 'none'. KVM needs level information of only 'present'
entries, otherwise it may regard a non-present PXE entry as a present
large page mapping.
- the function is not safe for mappings that can be torn down, because it
does not disable IRQs and because it returns a PTE pointer which is never
safe to dereference after the function returns.
So implement the logic for walking host page tables directly in KVM, and
stop using lookup_address_in_mm().
Cc: Sean Christopherson <seanjc@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220429031757.2042406-1-mizhang@google.com>
[Inline in host_pfn_mapping_level, ensure no semantic change for its
callers. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Fri, 22 Apr 2022 10:30:13 +0000 (12:30 +0200)]
KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags
member that at the time was unused. Unfortunately this extensibility
mechanism has several issues:
- x86 is not writing the member, so it would not be possible to use it
on x86 except for new events
- the member is not aligned to 64 bits, so the definition of the
uAPI struct is incorrect for 32- on 64-bit userspace. This is a
problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately
usage of flags was only introduced in 5.18.
Since padding has to be introduced, place a new field in there
that tells if the flags field is valid. To allow further extensibility,
in fact, change flags to an array of 16 values, and store how many
of the values are valid. The availability of the new ndata field
is tied to a system capability; all architectures are changed to
fill in the field.
To avoid breaking compilation of userspace that was using the flags
field, provide a userspace-only union to overlap flags with data[0].
The new field is placed at the same offset for both 32- and 64-bit
userspace.
Cc: Will Deacon <will@kernel.org> Cc: Marc Zyngier <maz@kernel.org> Cc: Peter Gonda <pgonda@google.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220422103013.34832-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR
Disallow memslots and MMIO SPTEs whose gpa range would exceed the host's
MAXPHYADDR, i.e. don't create SPTEs for gfns that exceed host.MAXPHYADDR.
The TDP MMU bounds its zapping based on host.MAXPHYADDR, and so if the
guest, possibly with help from userspace, manages to coerce KVM into
creating a SPTE for an "impossible" gfn, KVM will leak the associated
shadow pages (page tables):
On bare metal, encountering an impossible gpa in the page fault path is
well and truly impossible, barring CPU bugs, as the CPU will signal #PF
during the gva=>gpa translation (or a similar failure when stuffing a
physical address into e.g. the VMCS/VMCB). But if KVM is running as a VM
itself, the MAXPHYADDR enumerated to KVM may not be the actual MAXPHYADDR
of the underlying hardware, in which case the hardware will not fault on
the illegal-from-KVM's-perspective gpa.
Alternatively, KVM could continue allowing the dodgy behavior and simply
zap the max possible range. But, for hosts with MAXPHYADDR < 52, that's
a (minor) waste of cycles, and more importantly, KVM can't reasonably
support impossible memslots when running on bare metal (or with an
accurate MAXPHYADDR as a VM). Note, limiting the overhead by checking if
KVM is running as a guest is not a safe option as the host isn't required
to announce itself to the guest in any way, e.g. doesn't need to set the
HYPERVISOR CPUID bit.
A second alternative to disallowing the memslot behavior would be to
disallow creating a VM with guest.MAXPHYADDR > host.MAXPHYADDR. That
restriction is undesirable as there are legitimate use cases for doing
so, e.g. using the highest host.MAXPHYADDR out of a pool of heterogeneous
systems so that VMs can be migrated between hosts with different
MAXPHYADDRs without running afoul of the allow_smaller_maxphyaddr mess.
Note that any guest.MAXPHYADDR is valid with shadow paging, and it is
even useful in order to test KVM with MAXPHYADDR=52 (i.e. without
any reserved physical address bits).
The now common kvm_mmu_max_gfn() is inclusive instead of exclusive.
The memslot and TDP MMU code want an exclusive value, but the name
implies the returned value is inclusive, and the MMIO path needs an
inclusive check.
Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 524a1e4e381f ("KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs") Cc: stable@vger.kernel.org Cc: Maxim Levitsky <mlevitsk@redhat.com> Cc: Ben Gardon <bgardon@google.com> Cc: David Matlack <dmatlack@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220428233416.2446833-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge tag 'tegra-for-5.18-arm-defconfig-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
ARM: tegra: Default configuration fixes for v5.18
This contains two updates to the default configuration needed because of
a Kconfig symbol name change. This fixes a failure that was detected in
the NVIDIA automated test farm.
* tag 'tegra-for-5.18-arm-defconfig-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: config: multi v7: Enable NVIDIA Tegra video decoder driver
ARM: tegra_defconfig: Update CONFIG_TEGRA_VDE option
Merge tag 'imx-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.18, 2nd round:
- Fix one sparse warning on imx-weim driver.
- Fix vqmmc regulator to get UHS-I mode work on imx6ull-colibri board.
- Add missing 32.768 kHz PMIC clock for imx8mn-ddr4-evk board to fix
bd718xx-clk probe error.
* tag 'imx-fixes-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mn-ddr4-evk: Describe the 32.768 kHz PMIC clock
ARM: dts: imx6ull-colibri: fix vqmmc regulator
bus: imx-weim: make symbol 'weim_of_notifier' static
Merge tag 'sunxi-fixes-for-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Fix return value in RSB bus driver
* tag 'sunxi-fixes-for-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
Jan Kara [Thu, 7 Apr 2022 14:07:38 +0000 (16:07 +0200)]
bfq: Fix warning in bfqq_request_over_limit()
People are occasionally reporting a warning bfqq_request_over_limit()
triggering reporting that BFQ's idea of cgroup hierarchy (and its depth)
does not match what generic blkcg code thinks. This can actually happen
when bfqq gets moved between BFQ groups while bfqq_request_over_limit()
is running. Make sure the code is safe against BFQ queue being moved to
a different BFQ group.
Thomas Gleixner [Thu, 28 Apr 2022 13:50:54 +0000 (15:50 +0200)]
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
When a XEN_HVM guest uses the XEN PIRQ/Eventchannel mechanism, then
PCI/MSI[-X] masking is solely controlled by the hypervisor, but contrary to
XEN_PV guests this does not disable PCI/MSI[-X] masking in the PCI/MSI
layer.
This can lead to a situation where the PCI/MSI layer masks an MSI[-X]
interrupt and the hypervisor grants the write despite the fact that it
already requested the interrupt. As a consequence interrupt delivery on the
affected device is not happening ever.
Set pci_msi_ignore_mask to prevent that like it's done for XEN_PV guests
already.
i915:
- Fix #5284: Backlight control regression on XMG Core 15 e21
- Fix black display plane on Acer One AO532h
- Two smaller display fixes
sunxi:
- Single fix removing applying PHYS_OFFSET twice"
* tag 'drm-fixes-2022-04-29' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: keep mmhub clock gating being enabled during s2idle suspend
drm/amd/pm: fix the deadlock issue observed on SI
drm/amd/display: Fix memory leak in dcn21_clock_source_create
drm/amdgpu: don't runtime suspend if there are displays attached (v3)
drm/amdkfd: CRIU add support for GWS queues
drm/amdkfd: Fix GWS queue count
drm/sun4i: Remove obsolete references to PHYS_OFFSET
drm/i915/fbc: Consult hw.crtc instead of uapi.crtc
drm/i915: Fix SEL_FETCH_PLANE_*(PIPE_B+) register addresses
drm/i915: Check EDID for HDR static metadata when choosing blc
drm/i915: Fix DISP_POS_Y and DISP_HEIGHT defines
* tag 'net-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
tcp: fix F-RTO may not work correctly when receiving DSACK
Revert "ibmvnic: Add ethtool private flag for driver-defined queue limits"
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
ixgbe: ensure IPsec VF<->PF compatibility
MAINTAINERS: Update BNXT entry with firmware files
netfilter: nft_socket: only do sk lookups when indev is available
net: fec: add missing of_node_put() in fec_enet_init_stop_mode()
bnx2x: fix napi API usage sequence
tls: Skip tls_append_frag on zero copy size
Add Eric Dumazet to networking maintainers
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
net: dsa: lantiq_gswip: Don't set GSWIP_MII_CFG_RMII_CLK
net: Use this_cpu_inc() to increment net->core_stats
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
ice: fix use-after-free when deinitializing mailbox snapshot
ice: wait 5 s for EMP reset after firmware flash
ice: Protect vf_state check by cfg_lock in ice_vc_process_vf_msg()
...
io_rw_init_file does not initialize kiocb->private, so when iocb_bio_iopoll
reads kiocb->private it can contain uninitialized data.
Fixes: 3e08773c3841 ("block: switch polling to be bio based") Signed-off-by: Joseph Ravichandran <jravi@mit.edu> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'thermal-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These take back recent chages that started to confuse users and fix up
an attr.show callback prototype in a driver.
Specifics:
- Stop warning about deprecation of the userspace thermal governor
and cooling device status interface, because there are cases in
which user space has to drive thermal management with the help of
them (Daniel Lezcano)
- Fix attr.show callback prototype in the int340x thermal driver
(Kees Cook)"
* tag 'thermal-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/governor: Remove deprecated information
Revert "thermal/core: Deprecate changing cooling device state from userspace"
thermal: int340x: Fix attr.show callback prototype
Merge tag 'pm-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix up recent intel_idle driver changes and fix some ARM cpufreq
driver issues.
Specifics:
- Fix issues with the Qualcomm's cpufreq driver (Dmitry Baryshkov,
Vladimir Zapolskiy).
- Fix memory leak with the Sun501 driver (Xiaobing Luo).
- Make intel_idle enable C1E promotion on all CPUs when C1E is
preferred to C1 (Artem Bityutskiy).
- Make C6 optimization on Sapphire Rapids added recently work as
expected if both C1E and C1 are "preferred" (Artem Bityutskiy)"
* tag 'pm-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: Fix SPR C6 optimization
intel_idle: Fix the 'preferred_cstates' module parameter
cpufreq: qcom-cpufreq-hw: Clear dcvs interrupts
cpufreq: fix memory leak in sun50i_cpufreq_nvmem_probe
cpufreq: qcom-cpufreq-hw: Fix throttle frequency value on EPSS platforms
cpufreq: qcom-hw: provide online/offline operations
cpufreq: qcom-hw: fix the opp entries refcounting
cpufreq: qcom-hw: fix the race between LMH worker and cpuhp
cpufreq: qcom-hw: drop affinity hint before freeing the IRQ
Merge tag 'acpi-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael WysockiL
"These fix up the ACPI processor driver after a change made during the
5.16 cycle that inadvertently broke falling back to shallower C-states
when C3 cannot be used.
Specifics:
- Make the ACPI processor driver avoid falling back to C3 type of
C-states when C3 cannot be requested (Ville Syrjälä)
- Revert a quirk that is not necessary any more after fixing the
underlying issue properly (Ville Syrjälä)"
* tag 'acpi-5.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: processor: idle: fix lockup regression on 32-bit ThinkPad T40"
ACPI: processor: idle: Avoid falling back to C3 type C-states
Merge tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Highlights:
- asus-wmi bug-fixes
- intel-sdsu bug-fixes
- build (warning) fixes
- couple of hw-id additions"
* tag 'platform-drivers-x86-v5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel: pmc/core: change pmc_lpm_modes to static
platform/x86/intel/sdsi: Fix bug in multi packet reads
platform/x86/intel/sdsi: Poll on ready bit for writes
platform/x86/intel/sdsi: Handle leaky bucket
platform/x86: intel-uncore-freq: Prevent driver loading in guests
platform/x86: gigabyte-wmi: added support for B660 GAMING X DDR4 motherboard
platform/x86: dell-laptop: Add quirk entry for Latitude 7520
platform/x86: asus-wmi: Fix driver not binding when fan curve control probe fails
platform/x86: asus-wmi: Potential buffer overflow in asus_wmi_evaluate_method_buf()
tools/power/x86/intel-speed-select: fix build failure when using -Wl,--as-needed
Merge tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A minor fix for the DT binding documentation of the rt5190a driver"
* tag 'regulator-fix-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: Revise the rt5190a buck/ldo description
// Send 2 data segments
+0 write(4, ..., 2000) = 2000
+0 > P. 1:2001(2000) ack 1
// TLP
+.022 > P. 1001:2001(1000) ack 1
// Continue to send 8 data segments
+0 write(4, ..., 10000) = 10000
+0 > P. 2001:10001(8000) ack 1
// RTO
+.188 > . 1:1001(1000) ack 1
// The original data is acked and new data is sent(F-RTO step 2.b)
+0 < . 1:1(0) ack 2001 win 257
+0 > P. 10001:12001(2000) ack 1
// D-SACK caused by TLP is regarded as a dupack, this results in
// the incorrect judgment of "loss was real"(F-RTO step 3.a)
+.022 < . 1:1(0) ack 2001 win 257 <sack 1001:2001,nop,nop>
// Never-retransmitted data(3001:4001) are acked and
// expect to switch to open state(F-RTO step 3.b)
+0 < . 1:1(0) ack 4001 win 257
+0 %{ assert tcpi_ca_state == 0, tcpi_ca_state }%
Fixes: e33099f96d99 ("tcp: implement RFC5682 F-RTO") Signed-off-by: Pengcheng Yang <yangpc@wangsu.com> Acked-by: Neal Cardwell <ncardwell@google.com> Tested-by: Neal Cardwell <ncardwell@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1650967419-2150-1-git-send-email-yangpc@wangsu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1) Fix incorrect TCP connection tracking window reset for non-syn
packets, from Florian Westphal.
2) Incorrect dependency on CONFIG_NFT_FLOW_OFFLOAD, from Volodymyr Mytnyk.
3) Fix nft_socket from the output path, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_socket: only do sk lookups when indev is available
netfilter: conntrack: fix udp offload timeout sysctl
netfilter: nf_conntrack_tcp: re-init for syn packets only
====================
When client requests channel or ring size larger than what the server
can support the server will cap the request to the supported max. So,
the client would not be able to successfully request resources that
exceed the server limit.
Vladimir Oltean [Wed, 27 Apr 2022 20:30:17 +0000 (23:30 +0300)]
net: enetc: allow tc-etf offload even with NETIF_F_CSUM_MASK
The Time-Specified Departure feature is indeed mutually exclusive with
TX IP checksumming in ENETC, but TX checksumming in itself is broken and
was removed from this driver in commit 82728b91f124 ("enetc: Remove Tx
checksumming offload code").
The blamed commit declared NETIF_F_HW_CSUM in dev->features to comply
with software TSO's expectations, and still did the checksumming in
software by calling skb_checksum_help(). So there isn't any restriction
for the Time-Specified Departure feature.
However, enetc_setup_tc_txtime() doesn't understand that, and blindly
looks for NETIF_F_CSUM_MASK.
Instead of checking for things which can literally never happen in the
current code base, just remove the check and let the driver offload
tc-etf qdiscs.
MAINTAINERS: Update BNXT entry with firmware files
There appears to be a maintainer gap for BNXT TEE firmware files which
causes some patches to be missed. Update the entry for the BNXT Ethernet
controller with its companion firmware files.
Merge tag 'iio-fixes-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio
Pull set of IIO fixes for 5.18 from Jonathan Cameron:
"1st set of IIO fixes for the 5.18 cycle
ad3552r:
- Fix a bug with error codes being stored in unsigned local variable.
- Fix IS_ERR when value is either NULL or not rather than ERR_PTR
ad5446
- Fix shifting of read_raw value.
ad5592r
- Fix missing return value being set for a fwnode property read. ad7280a
- Wrong variable being used to set thresholds.
admv8818
- Kconfig dependency fix.
ak8975
- Missing regulator disable in error path.
bmi160
- Disable regulators in an error path. dac5571
- Fix chip id detection for devices with OF bindings.
inv_icm42600
- Handle a case of a missing I2C NACK during initially configuration.
ltc2688
- Fix voltage scaling where integer part was written twice and
decimal part not at all.
scd4x
- Handle error before using value.
sx9310
- Device property parsing against indio_dev->dev.of_node which
hasn't been set yet.
sx9324
- Fix hardware gain related maths.
- Wrong defaults for precharge internal resistance register."
* tag 'iio-fixes-for-5.18a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: imu: inv_icm42600: Fix I2C init possible nack
iio: dac: ltc2688: fix voltage scale read
iio:dac:ad3552r: Fix an IS_ERR() vs NULL check
iio: sx9324: Fix default precharge internal resistance register
iio: dac: ad5446: Fix read_raw not returning set value
iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()
iio:proximity:sx9324: Fix hardware gain read/write
iio:proximity:sx_common: Fix device property parsing on DT systems
iio: adc: ad7280a: Fix wrong variable used when setting thresholds.
iio:filter:admv8818: select REGMAP_SPI for ADMV8818
iio: dac: ad5592r: Fix the missing return value.
iio: dac: dac5571: Fix chip id detection for OF devices
iio:imu:bmi160: disable regulator in error path
iio: scd4x: check return of scd4x_write_and_fetch
iio: dac: ad3552r: fix signedness bug in ad3552r_reset()
netfilter: nft_socket: only do sk lookups when indev is available
Check if the incoming interface is available and NFT_BREAK
in case neither skb->sk nor input device are set.
Because nf_sk_lookup_slow*() assume packet headers are in the
'in' direction, use in postrouting is not going to yield a meaningful
result. Same is true for the forward chain, so restrict the use
to prerouting, input and output.
Use in output work if a socket is already attached to the skb.
Fixes: 554ced0a6e29 ("netfilter: nf_tables: add support for native socket matching") Reported-and-tested-by: Topi Miettinen <toiwoton@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Namhyung Kim [Sat, 16 Apr 2022 00:40:47 +0000 (17:40 -0700)]
perf symbol: Update symbols__fixup_end()
Now arch-specific functions all do the same thing. When it fixes the
symbol address it needs to check the boundary between the kernel image
and modules. For the last symbol in the previous region, it cannot
know the exact size as it's discarded already. Thus it just uses a
small page size (4096) and rounds it up like the last symbol.
Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220416004048.1514900-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Sat, 16 Apr 2022 00:40:46 +0000 (17:40 -0700)]
perf symbol: Pass is_kallsyms to symbols__fixup_end()
The symbol fixup is necessary for symbols in kallsyms since they don't
have size info. So we use the next symbol's address to calculate the
size. Now it's also used for user binaries because sometimes they miss
size for hand-written asm functions.
There's a arch-specific function to handle kallsyms differently but
currently it cannot distinguish kallsyms from others. Pass this
information explicitly to handle it properly. Note that those arch
functions will be moved to the generic function so I didn't added it to
the arch-functions.
Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220416004048.1514900-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Timothy Hayes [Thu, 21 Apr 2022 16:52:05 +0000 (17:52 +0100)]
perf test: Add perf_event_attr test for Arm SPE
Adds a perf_event_attr test for Arm SPE in which the presence of
physical addresses are checked when SPE unit is run with pa_enable=1.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20220421165205.117662-4-timothy.hayes@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Timothy Hayes [Thu, 21 Apr 2022 16:52:04 +0000 (17:52 +0100)]
perf arm-spe: Fix SPE events with phys addresses
This patch corrects a bug whereby SPE collection is invoked with
pa_enable=1 but synthesized events fail to show physical addresses.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20220421165205.117662-3-timothy.hayes@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Timothy Hayes [Thu, 21 Apr 2022 16:52:03 +0000 (17:52 +0100)]
perf arm-spe: Fix addresses of synthesized SPE events
This patch corrects a bug whereby synthesized events from SPE
samples are missing virtual addresses.
Fixes: 54f7815efef7fad9 ("perf arm-spe: Fill address info for samples") Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Timothy Hayes <timothy.hayes@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: bpf@vger.kernel.org Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Fastabend <john.fastabend@gmail.com> Cc: John Garry <john.garry@huawei.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: netdev@vger.kernel.org Cc: Song Liu <songliubraving@fb.com> Cc: Will Deacon <will@kernel.org> Cc: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/r/20220421165205.117662-2-timothy.hayes@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Thu, 28 Apr 2022 09:31:09 +0000 (12:31 +0300)]
perf intel-pt: Fix timeless decoding with perf.data directory
Intel PT does not capture data in separate directories, so do not
use separate directory processing because it doesn't work for
timeless decoding. It also looks like it doesn't support one_mmap
handling.
Example:
Before:
# perf record --kcore -a -e intel_pt/tsc=0/k sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.799 MB perf.data ]
# perf script --itrace=bep | head
#
gfs2: No short reads or writes upon glock contention
Commit 00bfe02f4796 ("gfs2: Fix mmap + page fault deadlocks for buffered
I/O") changed gfs2_file_read_iter() and gfs2_file_buffered_write() to
allow dropping the inode glock while faulting in user buffers. When the
lock was dropped, a short result was returned to indicate that the
operation was interrupted.
As pointed out by Linus (see the link below), this behavior is broken
and the operations should always re-acquire the inode glock and resume
the operation instead.
Unfortunately, the name/value choice for the MTE ELF segment type
(PT_ARM_MEMTAG_MTE) was pretty poor: LOPROC+1 is already in use by
PT_AARCH64_UNWIND, as defined in the AArch64 ELF ABI
(https://github.com/ARM-software/abi-aa/blob/main/aaelf64/aaelf64.rst).
Update the ELF segment type value to LOPROC+2 and also change the define
to PT_AARCH64_MEMTAG_MTE to match the AArch64 ELF ABI namespace. The
AArch64 ELF ABI document is updating accordingly (segment type not
previously mentioned in the document).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: 761b9b366cec ("elf: Introduce the ARM MTE ELF segment type") Cc: Will Deacon <will@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Machado <luis.machado@arm.com> Cc: Richard Earnshaw <Richard.Earnshaw@arm.com> Link: https://lore.kernel.org/r/20220425151833.2603830-1-catalin.marinas@arm.com Signed-off-by: Will Deacon <will@kernel.org>
Paolo Abeni [Thu, 28 Apr 2022 08:18:51 +0000 (10:18 +0200)]
Merge tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regression causing some HCI events to be discarded when they
shouldn't.
* tag 'for-net-2022-04-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted
Bluetooth: hci_event: Fix creating hci_conn object on error status
Bluetooth: hci_event: Fix checking for invalid handle on error status
====================