Linus Torvalds [Sat, 9 Aug 2025 03:52:37 +0000 (06:52 +0300)]
Merge tag 'v6.17rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix limiting repeated connections from same IP
- Fix for extracting shortname when name begins with a dot
- Four smbdirect fixes:
- three fixes to the receive path: potential unmap bug, potential
resource leaks and stale connections, and also potential use
after free race
- cleanup to remove unneeded queue
* tag 'v6.17rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
smb: server: Fix extension string in ksmbd_extract_shortname()
ksmbd: limit repeated connections from clients with the same IP
smb: server: let recv_done() avoid touching data_transfer after cleanup/move
smb: server: let recv_done() consistently call put_recvmsg/smb_direct_disconnect_rdma_connection
smb: server: make sure we call ib_dma_unmap_single() only if we called ib_dma_map_single already
smb: server: remove separate empty_recvmsg_queue
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
Linus Torvalds [Fri, 8 Aug 2025 03:56:55 +0000 (06:56 +0300)]
Merge tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Alexander Gordeev:
- Support MMIO read/write tracing
- Enable THP swapping and THP migration
- Unmask SLCF bit ("stateless command filtering") introduced with CEX8
cards, so that user space applications like lszcrypt could evaluate
and list this feature
- Fix the value of high_memory variable, so it considers possible
tailing offline memory blocks
- Make vmem_pte_alloc() consistent and always allocate memory of
PAGE_SIZE for page tables. This ensures a page table occupies the
whole page, as the rest of the code assumes
- Fix kernel image end address in the decompressor debug output
- Fix a typo in debug_sprintf_format_fn() comment
* tag 's390-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/debug: Fix typo in debug_sprintf_format_fn() comment
s390/boot: Fix startup debugging log
s390/mm: Allocate page table with PAGE_SIZE granularity
s390/mm: Enable THP_SWAP and THP_MIGRATION
s390: Support CONFIG_TRACE_MMIO_ACCESS
s390/mm: Set high_memory at the end of the identity mapping
s390/ap: Unmask SLCF bit in card and queue ap functions sysfs
Linus Torvalds [Fri, 8 Aug 2025 03:48:14 +0000 (06:48 +0300)]
Merge tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This is the fixes that built up in the merge window, mostly amdgpu and
xe with one i915 display fix, seems like things are pretty good for
rc1.
i915:
- DP LPFS fixes
xe:
- SRIOV: PF fixes and removal of need of module param
- Fix driver unbind around Devcoredump
- Mark xe driver as BROKEN if kernel page size is not 4kB
* tag 'drm-next-2025-08-08' of https://gitlab.freedesktop.org/drm/kernel: (28 commits)
drm/amdgpu: add missing vram lost check for LEGACY RESET
drm/amdgpu/discovery: fix fw based ip discovery
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
amdgpu/amdgpu_discovery: increase timeout limit for IFWI init
drm/amdgpu: Update SDMA firmware version check for user queue support
drm/amdgpu: Add NULL check for asic_funcs
drm/amd/display: Revert "drm/amd/display: Fix AMDGPU_MAX_BL_LEVEL value"
drm/amd/display: fix a Null pointer dereference vulnerability
drm/amd/display: Add primary plane to commits for correct VRR handling
drm/amdgpu: update mmhub 3.3 client id mappings
drm/amdgpu: update mmhub 3.0.1 client id mappings
drm/amdgpu: Retain job->vm in amdgpu_job_prepare_job
drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.
drm/amd/display: Don't overwrite dce60_clk_mgr
drm/amdkfd: Fix checkpoint-restore on multi-xcc
drm/amd: Restore cached manual clock settings during resume
drm/amd: Restore cached power limit during resume
drm/amdgpu: Update external revid for GC v9.5.0
drm/amdgpu: Update supported modes for GC v9.5.0
Mark xe driver as BROKEN if kernel page size is not 4kB
...
Linus Torvalds [Fri, 8 Aug 2025 03:43:20 +0000 (06:43 +0300)]
Merge tag 'fbdev-for-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes for 6.17-rc1:
- Revert a patch which broke VGA console
- Fix an out-of-bounds access bug which may happen during console
resizing when a console is mapped to a frame buffer
* tag 'fbdev-for-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
Revert "vgacon: Add check for vc_origin address range in vgacon_scroll()"
fbdev: Fix vmalloc out-of-bounds write in fast_imageblit
Linus Torvalds [Fri, 8 Aug 2025 03:36:48 +0000 (06:36 +0300)]
Merge tag 'loongarch-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Complete KSave registers definition
- Support the mem=<size> kernel parameter
- Support BPF dynamic modification & trampoline
- Add MMC/SDIO controller nodes in dts
- Some bug fixes and other small changes
* tag 'loongarch-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: vDSO: Remove -nostdlib complier flag
LoongArch: dts: Add eMMC/SDIO controller support to Loongson-2K2000
LoongArch: dts: Add SDIO controller support to Loongson-2K1000
LoongArch: dts: Add SDIO controller support to Loongson-2K0500
LoongArch: BPF: Set bpf_jit_bypass_spec_v1/v4()
LoongArch: BPF: Fix the tailcall hierarchy
LoongArch: BPF: Fix jump offset calculation in tailcall
LoongArch: BPF: Add struct ops support for trampoline
LoongArch: BPF: Add basic bpf trampoline support
LoongArch: BPF: Add dynamic code modification support
LoongArch: BPF: Rename and refactor validate_code()
LoongArch: Add larch_insn_gen_{beq,bne} helpers
LoongArch: Don't use %pK through printk() in unwinder
LoongArch: Avoid in-place string operation on FDT content
LoongArch: Support mem=<size> kernel parameter
LoongArch: Make relocate_new_kernel_size be a .quad value
LoongArch: Complete KSave registers definition
Thorsten Blum [Wed, 6 Aug 2025 01:03:49 +0000 (03:03 +0200)]
smb: server: Fix extension string in ksmbd_extract_shortname()
In ksmbd_extract_shortname(), strscpy() is incorrectly called with the
length of the source string (excluding the NUL terminator) rather than
the size of the destination buffer. This results in "__" being copied
to 'extension' rather than "___" (two underscores instead of three).
Use the destination buffer size instead to ensure that the string "___"
(three underscores) is copied correctly.
Cc: stable@vger.kernel.org Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Namjae Jeon [Tue, 5 Aug 2025 09:13:13 +0000 (18:13 +0900)]
ksmbd: limit repeated connections from clients with the same IP
Repeated connections from clients with the same IP address may exhaust
the max connections and prevent other normal client connections.
This patch limit repeated connections from clients with the same IP.
Reported-by: tianshuo han <hantianshuo233@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Dave Airlie [Thu, 7 Aug 2025 19:50:02 +0000 (05:50 +1000)]
Merge tag 'drm-xe-next-fixes-2025-08-06' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
- SRIOV: PF fixes and removal of need of module param (Michal)
- Fix driver unbind around Devcoredump (Bala)
- Mark xe driver as BROKEN if kernel page size is not 4kB (Simon)
Linus Torvalds [Thu, 7 Aug 2025 04:40:01 +0000 (07:40 +0300)]
Merge tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is
gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...
Linus Torvalds [Thu, 7 Aug 2025 04:38:25 +0000 (07:38 +0300)]
Merge tag 'for-linus-6.17-1' of https://github.com/cminyard/linux-ipmi
Pull ipmi updates from Corey Minyard:
"Some small fixes for the IPMI driver
Nothing huge, some rate limiting on logs, a strncpy fix where the
source and destination could be the same, and removal of some unused
cruft"
* tag 'for-linus-6.17-1' of https://github.com/cminyard/linux-ipmi:
ipmi: Use dev_warn_ratelimited() for incorrect message warnings
char: ipmi: remove redundant variable 'type' and check
ipmi: Fix strcpy source and destination the same
Linus Torvalds [Thu, 7 Aug 2025 04:36:23 +0000 (07:36 +0300)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fix from Jason Gunthorpe:
"Single fix to correct the iov_iter construction in soft iwarp. This
avoids blktest crashes with recent changes to the allocators"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpages
Linus Torvalds [Thu, 7 Aug 2025 04:32:50 +0000 (07:32 +0300)]
Merge tag 'vfio-v6.17-rc1-v2' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Fix imbalance where the no-iommu/cdev device path skips too much on
open, failing to increment a reference, but still decrements the
reference on close. Add bounds checking to prevent such underflows
(Jacob Pan)
- Fill missing detach_ioas op for pds_vfio_pci, fixing probe failure
when used with IOMMUFD (Brett Creeley)
- Split SR-IOV VFs to separate dev_set, avoiding unnecessary
serialization between VFs that appear on the same bus (Alex
Williamson)
- Fix a theoretical integer overflow is the mlx5-vfio-pci variant
driver (Artem Sadovnikov)
- Implement missing VF token checking support via vfio cdev/IOMMUFD
interface (Jason Gunthorpe)
- Add a cond_resched() call to avoid holding the CPU too long during
DMA mapping operations (Keith Busch)
* tag 'vfio-v6.17-rc1-v2' of https://github.com/awilliam/linux-vfio:
vfio/type1: conditional rescheduling while pinning
vfio/qat: add support for intel QAT 6xxx virtual functions
vfio/qat: Remove myself from VFIO QAT PCI driver maintainers
vfio/pci: Do vf_token checks for VFIO_DEVICE_BIND_IOMMUFD
vfio/mlx5: fix possible overflow in tracking max message size
vfio/pci: Separate SR-IOV VF dev_set
vfio/pds: Fix missing detach_ioas op
vfio: Prevent open_count decrement to negative
vfio: Fix unbalanced vfio_df_close call in no-iommu mode
Alex Deucher [Wed, 30 Jul 2025 15:16:05 +0000 (11:16 -0400)]
drm/amdgpu/discovery: fix fw based ip discovery
We only need the fw based discovery table for sysfs. No
need to parse it. Additionally parsing some of the board
specific tables may result in incorrect data on some boards.
just load the binary and don't parse it on those boards.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4441 Fixes: 80a0e8282933 ("drm/amdgpu/discovery: optionally use fw based ip discovery") Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62eedd150fa11aefc2d377fc746633fdb1baeb55) Cc: stable@vger.kernel.org
Amber Lin [Fri, 1 Aug 2025 00:45:00 +0000 (20:45 -0400)]
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
Since KFD proc content was moved to kernel debugfs, we can't destroy KFD
debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior
to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens
when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but
kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line
debugfs_remove_recursive(entry->proc_dentry);
tries to remove /sys/kernel/debug/kfd/proc/<pid> while
/sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel
NULL pointer.
Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Eric Huang <jinhuieric.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233) Cc: stable@vger.kernel.org
smb: server: let recv_done() avoid touching data_transfer after cleanup/move
Calling enqueue_reassembly() and wake_up_interruptible(&t->wait_reassembly_queue)
or put_receive_buffer() means the recvmsg/data_transfer pointer might
get re-used by another thread, which means these should be
the last operations before calling return.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: let recv_done() consistently call put_recvmsg/smb_direct_disconnect_rdma_connection
We should call put_recvmsg() before smb_direct_disconnect_rdma_connection()
in order to call it before waking up the callers.
In all error cases we should call smb_direct_disconnect_rdma_connection()
in order to avoid stale connections.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
smb: server: make sure we call ib_dma_unmap_single() only if we called ib_dma_map_single already
In case of failures either ib_dma_map_single() might not be called yet
or ib_dma_unmap_single() was already called.
We should make sure put_recvmsg() only calls ib_dma_unmap_single() if needed.
Cc: Namjae Jeon <linkinjeon@kernel.org> Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
There's no need to maintain two lists, we can just
have a single list of receive buffers, which are free to use.
Cc: Steve French <smfrench@gmail.com> Cc: Tom Talpey <tom@talpey.com> Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Signed-off-by: Stefan Metzmacher <metze@samba.org> Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Wed, 6 Aug 2025 12:52:56 +0000 (15:52 +0300)]
Merge tag 'for-6.17-fix-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"A single btrfs commit. It fixes a problem that people started to hit
since 6.15.3 during log replay (e.g. after a crash).
The bug is old but got more likely to happen since commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion") got backported to stable (6.15 only)"
* tag 'for-6.17-fix-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix log tree replay failure due to file with 0 links and extents
Linus Torvalds [Wed, 6 Aug 2025 12:44:25 +0000 (15:44 +0300)]
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
Filipe Manana [Wed, 30 Jul 2025 18:18:37 +0000 (19:18 +0100)]
btrfs: fix log tree replay failure due to file with 0 links and extents
If we log a new inode (not persisted in a past transaction) that has 0
links and extents, then log another inode with an higher inode number, we
end up with failing to replay the log tree with -EINVAL. The steps for
this are:
1) create new file A
2) write some data to file A
3) open an fd on file A
4) unlink file A
5) fsync file A using the previously open fd
6) create file B (has higher inode number than file A)
7) fsync file B
8) power fail before current transaction commits
Now when attempting to mount the fs, the log replay will fail with
-ENOENT at replay_one_extent() when attempting to replay the first
extent of file A. The failure comes when trying to open the inode for
file A in the subvolume tree, since it doesn't exist.
Before commit 5f61b961599a ("btrfs: fix inode lookup error handling
during log replay"), the returned error was -EIO instead of -ENOENT,
since we converted any errors when attempting to read an inode during
log replay to -EIO.
The reason for this is that the log replay procedure fails to ignore
the current inode when we are at the stage LOG_WALK_REPLAY_ALL, our
current inode has 0 links and last inode we processed in the previous
stage has a non 0 link count. In other words, the issue is that at
replay_one_extent() we only update wc->ignore_cur_inode if the current
replay stage is LOG_WALK_REPLAY_INODES.
Fix this by updating wc->ignore_cur_inode whenever we find an inode item
regardless of the current replay stage. This is a simple solution and easy
to backport, but later we can do other alternatives like avoid logging
extents or inode items other than the inode item for inodes with a link
count of 0.
The problem with the wc->ignore_cur_inode logic has been around since
commit f2d72f42d5fa ("Btrfs: fix warning when replaying log after fsync
of a tmpfile") but it only became frequent to hit since the more recent
commit 5e85262e542d ("btrfs: fix fsync of files with no hard links not
persisting deletion"), because we stopped skipping inodes with a link
count of 0 when logging, while before the problem would only be triggered
if trying to replay a log tree created with an older kernel which has a
logged inode with 0 links.
Linus Torvalds [Wed, 6 Aug 2025 05:52:59 +0000 (08:52 +0300)]
Merge tag 'ata-6.17-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Cleanup whitespace in messages in libata-core and the pata_pdc2027x,
pata_macio drivers (Colin)
- Fix ata_to_sense_error() to avoid seeing nonsensical sense data for
rare cases where we fail to get sense data from the drive. The
complementary fix to this is to ensure that we always return the
generic "ABORTED COMMAND" sense data for a failed command for which
we have no status or error fields
- The recent changes to link power management (LPM) which now prevent
the user from attempting to set an LPM policy through the
link_power_management_policy caused some regressions in test
environments because of the error that is now returned when writing
to that attribute when LPM is not supported. To allow users to not
trip on this, introduce the new link_power_management_supported
attribute to allow simple testing of a port/device LPM support (me)
* tag 'ata-6.17-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: pata_pdc2027x: Remove space before newline and abbreviations
ata: pata_macio: Remove space before newline
ata: libata-core: Remove space before newline
ata: libata-sata: Add link_power_management_supported sysfs attribute
ata: libata-scsi: Return aborted command when missing sense and result TF
ata: libata-scsi: Fix ata_to_sense_error() status handling
Linus Torvalds [Wed, 6 Aug 2025 04:32:52 +0000 (07:32 +0300)]
Merge tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"This is the last pull request from me.
I'm grateful to have been able to continue as a maintainer for eight
years. From the next cycle, Nathan and Nicolas will maintain Kbuild.
- Fix a shortcut key issue in menuconfig
- Fix missing rebuild of kheaders
- Sort the symbol dump generated by gendwarfsyms
- Support zboot extraction in scripts/extract-vmlinux
- Migrate gconfig to GTK 3
- Add TAR variable to allow overriding the default tar command
- Hand over Kbuild maintainership"
* tag 'kbuild-v6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (92 commits)
MAINTAINERS: hand over Kbuild maintenance
kheaders: make it possible to override TAR
kbuild: userprogs: use correct linker when mixing clang and GNU ld
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
kconfig: gconf: refactor text_insert_help()
kconfig: gconf: remove unneeded variable in text_insert_msg
kconfig: gconf: use hyphens in signals
kconfig: gconf: replace GtkImageMenuItem with GtkMenuItem
kconfig: gconf: Fix Back button behavior
kconfig: gconf: fix single view to display dependent symbols correctly
scripts: add zboot support to extract-vmlinux
gendwarfksyms: order -T symtypes output by name
gendwarfksyms: use preferred form of sizeof for allocation
kconfig: qconf: confine {begin,end}Group to constructor and destructor
kconfig: qconf: fix ConfigList::updateListAllforAll()
kconfig: add a function to dump all menu entries in a tree-like format
kconfig: gconf: show GTK version in About dialog
kconfig: gconf: replace GtkHPaned and GtkVPaned with GtkPaned
kconfig: gconf: replace GdkColor with GdkRGBA
...
Sasha Levin [Tue, 5 Aug 2025 12:58:20 +0000 (08:58 -0400)]
media: venus: Fix OPP table error handling
The venus driver fails to check if dev_pm_opp_find_freq_{ceil,floor}()
returns an error pointer before calling dev_pm_opp_put(). This causes
a crash when OPP tables are not present in device tree.
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 000000000000002e
...
pc : dev_pm_opp_put+0x1c/0x4c
lr : core_clks_enable+0x4c/0x16c [venus_core]
Add IS_ERR() checks before calling dev_pm_opp_put() to avoid
dereferencing error pointers.
Fixes: b179234b5e59 ("media: venus: pm_helpers: use opp-table for the frequency") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 6 Aug 2025 01:41:21 +0000 (04:41 +0300)]
Merge tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
Pull perf fixes from Thomas Gleixner:
"Perf fixes for perf_mmap() reference counting to prevent potential
reference count leaks which are caused by:
- VMA splits, which change the offset or size of a mapping, which
causes perf_mmap_close() to ignore the unmap or unmap the wrong
buffer.
- Several internal issues of perf_mmap(), which can cause reference
count leaks in the perf mmap, corrupt accounting or cause leaks in
perf drivers.
The main fix is to prevent VMA splits by implementing the
[may_]split() callback for vm operations.
The other issues are addressed by rearranging code, early returns on
failure and invocation of cleanups.
Also provide a selftest to validate the fixes.
The reference counting should be converted to refcount_t, but that
requires larger refactoring of the code and will be done once these
fixes are upstream"
* tag 'perf-fixes-27504' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git:
selftests/perf_events: Add a mmap() correctness test
perf/core: Prevent VMA split of buffer mappings
perf/core: Handle buffer mapping fail correctly in perf_mmap()
perf/core: Exit early on perf_mmap() fail
perf/core: Don't leak AUX buffer refcount on allocation failure
perf/core: Preserve AUX buffer allocation failure result
Ammar Faizi [Wed, 6 Aug 2025 00:31:05 +0000 (07:31 +0700)]
net: usbnet: Fix the wrong netif_carrier_on() call
The commit referenced in the Fixes tag causes usbnet to malfunction
(identified via git bisect). Post-commit, my external RJ45 LAN cable
fails to connect. Linus also reported the same issue after pulling that
commit.
The code has a logic error: netif_carrier_on() is only called when the
link is already on. Fix this by moving the netif_carrier_on() call
outside the if-statement entirely. This ensures it is always called
when EVENT_LINK_CARRIER_ON is set and properly clears it regardless
of the link state.
Masahiro Yamada [Mon, 4 Aug 2025 14:20:07 +0000 (23:20 +0900)]
MAINTAINERS: hand over Kbuild maintenance
I'm stepping down as the maintainer of Kbuild/Kconfig.
It was enjoyable to refactor and improve the kernel build system,
but due to personal reasons, I believe it's difficult for me to
continue in this role any further.
I discussed this off-list with Nathan and Nicolas, and they have
kindly agreed to take over the maintenance of Kbuild with Odd Fixes.
I'm grateful to them for stepping in.
As for Kconfig, there are currently no designated reviewers, so the
maintainer position will remain vacant for now. I hope someone will
step up to take on the role.
Michał Górny [Tue, 29 Jul 2025 13:24:55 +0000 (15:24 +0200)]
kheaders: make it possible to override TAR
Commit 86cdd2fdc4e3 ("kheaders: make headers archive reproducible")
introduced a number of options specific to GNU tar to the `tar`
invocation in `gen_kheaders.sh` script. This causes the script to fail
to work on systems where `tar` is not GNU tar. This can occur e.g.
on recent Gentoo Linux installations that support using bsdtar from
libarchive instead.
Add a `TAR` make variable to make it possible to override the tar
executable used, e.g. by specifying:
make TAR=gtar
Link: https://bugs.gentoo.org/884061 Reported-by: Sam James <sam@gentoo.org> Tested-by: Sam James <sam@gentoo.org> Co-developed-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Michał Górny <mgorny@gentoo.org> Signed-off-by: Sam James <sam@gentoo.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Thomas Weißschuh [Mon, 28 Jul 2025 13:47:37 +0000 (15:47 +0200)]
kbuild: userprogs: use correct linker when mixing clang and GNU ld
The userprogs infrastructure does not expect clang being used with GNU ld
and in that case uses /usr/bin/ld for linking, not the configured $(LD).
This fallback is problematic as it will break when cross-compiling.
Mixing clang and GNU ld is used for example when building for SPARC64,
as ld.lld is not sufficient; see Documentation/kbuild/llvm.rst.
Relax the check around --ld-path so it gets used for all linkers.
Fixes: dfc1b168a8c4 ("kbuild: userprogs: use correct lld when linking through clang") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c
strcpy() performs no bounds checking and can lead to buffer overflows if
the input string exceeds the destination buffer size. This patch replaces
it with strncpy(), and null terminates the input string.
kconfig: lxdialog: replace strcpy with snprintf in print_autowrap
strcpy() does not perform bounds checking and can lead to buffer overflows
if the source string exceeds the destination buffer size. In
print_autowrap(), replace strcpy() with snprintf() to safely copy the
prompt string into the fixed-size tempstr buffer.
Meghana Malladi [Sun, 3 Aug 2025 18:02:16 +0000 (23:32 +0530)]
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
emac_rx_packet() is a common function for handling traffic
for both xdp and non-xdp use cases. Use common logic for
handling skb with or without xdp to prevent any incorrect
packet processing. This patch fixes ping working with
XDP_PASS for icssg driver.
net: Update threaded state in napi config in netif_set_threaded
Commit 2677010e7793 ("Add support to set NAPI threaded for individual
NAPI") added support to enable/disable threaded napi using netlink. This
also extended the napi config save/restore functionality to set the napi
threaded state. This breaks netdev reset for drivers that use napi
threaded at device level and also use napi config save/restore on
napi_disable/napi_enable. Basically on netdev with napi threaded enabled
at device level, a napi_enable call will get stuck trying to stop the
napi kthread. This is because the napi->config->threaded is set to
disabled when threaded is enabled at device level.
The issue can be reproduced on virtio-net device using qemu. To
reproduce the issue run following,
Update the threaded state in napi config in netif_set_threaded and add a
new test that verifies this scenario.
Tested on qemu with virtio-net:
NETIF=eth0 ./tools/testing/selftests/drivers/net/napi_threaded.py
TAP version 13
1..2
ok 1 napi_threaded.change_num_queues
ok 2 napi_threaded.enable_dev_threaded_disable_napi_threaded
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Ido Schimmel [Mon, 4 Aug 2025 11:43:20 +0000 (14:43 +0300)]
selftests: netdevsim: Xfail nexthop test on slow machines
A lot of test cases in the file are related to the idle and unbalanced
timers of resilient nexthop groups and these tests are reported to be
flaky on slow machines running debug kernels.
Rather than marking a lot of individual tests with xfail_on_slow(),
simply mark all the tests. Note that the test is stable on non-debug
machines and that with debug kernels we are mainly interested in the
output of various sanitizers in order to determine pass / fail.
Before:
# make -C tools/testing/selftests KSFT_MACHINE_SLOW=yes \
TARGETS=drivers/net/netdevsim TEST_PROGS=nexthop.sh \
TEST_GEN_PROGS="" run_tests
[...]
# TEST: Bucket migration after idle timer (with delete) [FAIL]
# Group expected to still be unbalanced
[...]
not ok 1 selftests: drivers/net/netdevsim: nexthop.sh # exit=1
After:
# make -C tools/testing/selftests KSFT_MACHINE_SLOW=yes \
TARGETS=drivers/net/netdevsim TEST_PROGS=nexthop.sh \
TEST_GEN_PROGS="" run_tests
[...]
# TEST: Bucket migration after idle timer (with delete) [XFAIL]
# Group expected to still be unbalanced
[...]
ok 1 selftests: drivers/net/netdevsim: nexthop.sh
Reported-by: Jakub Kicinski <kuba@kernel.org> Closes: https://lore.kernel.org/netdev/20250729160609.02e0f157@kernel.org/ Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Link: https://patch.msgid.link/20250804114320.193203-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 5 Aug 2025 23:01:47 +0000 (16:01 -0700)]
Merge branch 'eth-fbnic-fix-drop-stats-support'
Mohsin Bashir says:
====================
eth: fbnic: Fix drop stats support
Fix hardware drop stats support on the TX path of fbnic by addressing two
issues: ensure that tx_dropped stats are correctly copied to the
rtnl_link_stats64 struct, and protect the copying of drop stats from
fdb->hw_stats to the local variable with the hw_stats_lock to
ensure consistency.
====================
Mohsin Bashir [Sat, 2 Aug 2025 02:46:36 +0000 (19:46 -0700)]
eth: fbnic: Lock the tx_dropped update
Wrap copying of drop stats on TX path from fbd->hw_stats by the
hw_stats_lock. Currently, it is being performed outside the lock and
another thread accessing fbd->hw_stats can lead to inconsistencies.
Fixes: 5f8bd2ce8269 ("eth: fbnic: add support for TMI stats") Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250802024636.679317-3-mohsin.bashr@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 1 Aug 2025 17:07:54 +0000 (10:07 -0700)]
eth: fbnic: remove the debugging trick of super high page bias
Alex added page bias of LONG_MAX, which is admittedly quite
a clever way of catching overflows of the pp ref count.
The page pool code was "optimized" to leave the ref at 1
for freed pages so it can't catch basic bugs by itself any more.
(Something we should probably address under DEBUG_NET...)
Unfortunately for fbnic since commit f7dc3248dcfb ("skbuff: Optimization
of SKB coalescing for page pool") core _may_ actually take two extra
pp refcounts, if one of them is returned before driver gives up the bias
the ret < 0 check in page_pool_unref_netmem() will trigger.
While at it add a FBNIC_ to the name of the driver constant.
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
After the call to phy_disconnect() netdev->phydev is reset to NULL.
So fixed_phy_unregister() would be called with a NULL pointer as argument.
Therefore cache the phy_device before this call.
Fixes: e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Link: https://patch.msgid.link/2b80a77a-06db-4dd7-85dc-3a8e0de55a1d@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Keith Busch [Tue, 15 Jul 2025 18:46:22 +0000 (11:46 -0700)]
vfio/type1: conditional rescheduling while pinning
A large DMA mapping request can loop through dma address pinning for
many pages. In cases where THP can not be used, the repeated vmf_insert_pfn can
be costly, so let the task reschedule as need to prevent CPU stalls. Failure to
do so has potential harmful side effects, like increased memory pressure
as unrelated rcu tasks are unable to make their reclaim callbacks and
result in OOM conditions.
vfio/qat: add support for intel QAT 6xxx virtual functions
Extend the qat_vfio_pci variant driver to support QAT 6xxx Virtual
Functions (VFs). Add the relevant QAT 6xxx VF device IDs to the driver's
probe table, enabling proper detection and initialization of these devices.
Update the module description to reflect that the driver now supports all
QAT generations.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com> Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com> Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Link: https://lore.kernel.org/r/20250715081150.1244466-1-suman.kumar.chakraborty@intel.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Jason Gunthorpe [Mon, 14 Jul 2025 16:08:25 +0000 (13:08 -0300)]
vfio/pci: Do vf_token checks for VFIO_DEVICE_BIND_IOMMUFD
This was missed during the initial implementation. The VFIO PCI encodes
the vf_token inside the device name when opening the device from the group
FD, something like:
This is used to control access to a VF unless there is co-ordination with
the owner of the PF.
Since we no longer have a device name in the cdev path, pass the token
directly through VFIO_DEVICE_BIND_IOMMUFD using an optional field
indicated by VFIO_DEVICE_BIND_FLAG_TOKEN.
Fixes: 5fcc26969a16 ("vfio: Add VFIO_DEVICE_BIND_IOMMUFD") Tested-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/0-v3-bdd8716e85fe+3978a-vfio_token_jgg@nvidia.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Marcos Alano [Tue, 5 Aug 2025 20:44:29 +0000 (13:44 -0700)]
Input: add keycode for performance mode key
Alienware calls this key "Performance Boost". Dell calls it "G-Mode".
The goal is to have a specific keycode to detect when this key is
pressed, so userspace can act upon it and do what have to do, usually
starting the power profile for performance.
Lorenzo Stoakes [Sat, 2 Aug 2025 20:55:35 +0000 (22:55 +0200)]
selftests/perf_events: Add a mmap() correctness test
Exercise various mmap(), munmap() and mremap() invocations, which might
cause a perf buffer mapping to be split or truncated.
To avoid hard coding the perf event and having dependencies on
architectures and configuration options, scan through event types in sysfs
and try to open them. On success, try to mmap() and if that succeeds try to
mmap() the AUX buffer.
In case that no AUX buffer supporting event is found, only test the base
buffer mapping. If no mappable event is found or permissions are not
sufficient, skip the tests.
Reserve a PROT_NONE region for both rb and aux tests to allow testing the
case where mremap unmaps beyond the end of a mapped VMA to prevent it from
unmapping unrelated mappings.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Co-developed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Thomas Gleixner [Wed, 30 Jul 2025 21:01:21 +0000 (23:01 +0200)]
perf/core: Prevent VMA split of buffer mappings
The perf mmap code is careful about mmap()'ing the user page with the
ringbuffer and additionally the auxiliary buffer, when the event supports
it. Once the first mapping is established, subsequent mapping have to use
the same offset and the same size in both cases. The reference counting for
the ringbuffer and the auxiliary buffer depends on this being correct.
Though perf does not prevent that a related mapping is split via mmap(2),
munmap(2) or mremap(2). A split of a VMA results in perf_mmap_open() calls,
which take reference counts, but then the subsequent perf_mmap_close()
calls are not longer fulfilling the offset and size checks. This leads to
reference count leaks.
As perf already has the requirement for subsequent mappings to match the
initial mapping, the obvious consequence is that VMA splits, caused by
resizing of a mapping or partial unmapping, have to be prevented.
Implement the vm_operations_struct::may_split() callback and return
unconditionally -EINVAL.
That ensures that the mapping offsets and sizes cannot be changed after the
fact. Remapping to a different fixed address with the same size is still
possible as it takes the references for the new mapping and drops those of
the old mapping.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-27504 Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: stable@vger.kernel.org
Thomas Gleixner [Sat, 2 Aug 2025 10:48:55 +0000 (12:48 +0200)]
perf/core: Handle buffer mapping fail correctly in perf_mmap()
After successful allocation of a buffer or a successful attachment to an
existing buffer perf_mmap() tries to map the buffer read only into the page
table. If that fails, the already set up page table entries are zapped, but
the other perf specific side effects of that failure are not handled. The
calling code just cleans up the VMA and does not invoke perf_mmap_close().
This leaks reference counts, corrupts user->vm accounting and also results
in an unbalanced invocation of event::event_mapped().
Cure this by moving the event::event_mapped() invocation before the
map_range() call so that on map_range() failure perf_mmap_close() can be
invoked without causing an unbalanced event::event_unmapped() call.
perf_mmap_close() undoes the reference counts and eventually frees buffers.
Fixes: b709eb872e19 ("perf: map pages in advance") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
Thomas Gleixner [Sat, 2 Aug 2025 10:49:48 +0000 (12:49 +0200)]
perf/core: Exit early on perf_mmap() fail
When perf_mmap() fails to allocate a buffer, it still invokes the
event_mapped() callback of the related event. On X86 this might increase
the perf_rdpmc_allowed reference counter. But nothing undoes this as
perf_mmap_close() is never called in this case, which causes another
reference count leak.
Return early on failure to prevent that.
Fixes: 1e0fb9ec679c ("perf: Add pmu callbacks to track event mapping and unmapping") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
Thomas Gleixner [Sat, 2 Aug 2025 10:39:39 +0000 (12:39 +0200)]
perf/core: Don't leak AUX buffer refcount on allocation failure
Failure of the AUX buffer allocation leaks the reference count.
Set the reference count to 1 only when the allocation succeeds.
Fixes: 45bfb2e50471 ("perf: Add AUX area to ring buffer for raw data streams") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
Thomas Gleixner [Mon, 4 Aug 2025 20:22:09 +0000 (22:22 +0200)]
perf/core: Preserve AUX buffer allocation failure result
A recent overhaul sets the return value to 0 unconditionally after the
allocations, which causes reference count leaks and corrupts the user->vm
accounting.
Preserve the AUX buffer allocation failure return value, so that the
subsequent code works correctly.
Fixes: 0983593f32c4 ("perf/core: Lift event->mmap_mutex in perf_mmap()") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: stable@vger.kernel.org
Pedro Falcato [Tue, 29 Jul 2025 12:03:48 +0000 (13:03 +0100)]
RDMA/siw: Fix the sendmsg byte count in siw_tcp_sendpages
Ever since commit c2ff29e99a76 ("siw: Inline do_tcp_sendpages()"),
we have been doing this:
static int siw_tcp_sendpages(struct socket *s, struct page **page, int offset,
size_t size)
[...]
/* Calculate the number of bytes we need to push, for this page
* specifically */
size_t bytes = min_t(size_t, PAGE_SIZE - offset, size);
/* If we can't splice it, then copy it in, as normal */
if (!sendpage_ok(page[i]))
msg.msg_flags &= ~MSG_SPLICE_PAGES;
/* Set the bvec pointing to the page, with len $bytes */
bvec_set_page(&bvec, page[i], bytes, offset);
/* Set the iter to $size, aka the size of the whole sendpages (!!!) */
iov_iter_bvec(&msg.msg_iter, ITER_SOURCE, &bvec, 1, size);
try_page_again:
lock_sock(sk);
/* Sendmsg with $size size (!!!) */
rv = tcp_sendmsg_locked(sk, &msg, size);
This means we've been sending oversized iov_iters and tcp_sendmsg calls
for a while. This has a been a benign bug because sendpage_ok() always
returned true. With the recent slab allocator changes being slowly
introduced into next (that disallow sendpage on large kmalloc
allocations), we have recently hit out-of-bounds crashes, due to slight
differences in iov_iter behavior between the MSG_SPLICE_PAGES and
"regular" copy paths:
(MSG_SPLICE_PAGES)
skb_splice_from_iter
iov_iter_extract_pages
iov_iter_extract_bvec_pages
uses i->nr_segs to correctly stop in its tracks before OoB'ing everywhere
skb_splice_from_iter gets a "short" read
(!MSG_SPLICE_PAGES)
skb_copy_to_page_nocache copy=iov_iter_count
[...]
copy_from_iter
/* this doesn't help */
if (unlikely(iter->count < len))
len = iter->count;
iterate_bvec
... and we run off the bvecs
Fix this by properly setting the iov_iter's byte count, plus sending the
correct byte count to tcp_sendmsg_locked.
Link: https://patch.msgid.link/r/20250729120348.495568-1-pfalcato@suse.de Cc: stable@vger.kernel.org Fixes: c2ff29e99a76 ("siw: Inline do_tcp_sendpages()") Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202507220801.50a7210-lkp@intel.com Reviewed-by: David Howells <dhowells@redhat.com> Signed-off-by: Pedro Falcato <pfalcato@suse.de> Acked-by: Bernard Metzler <bernard.metzler@linux.dev> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Linus Torvalds [Tue, 5 Aug 2025 13:55:03 +0000 (16:55 +0300)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM update from Russell King:
"Just one development update this time:
- Finish removing Coresight support"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9449/1: coresight: Finish removal of Coresight support in arch/arm/kernel
Linus Torvalds [Tue, 5 Aug 2025 13:37:05 +0000 (16:37 +0300)]
Merge tag 'exfat-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Use generic_write_sync instead of vfs_fsync_range in exfat_file_write_iter.
It will fix an issue where fdatasync would be set incorrectly.
- Fix potential infinite loop by the self-linked chain.
* tag 'exfat-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add cluster chain loop check for dir
exfat: fdatasync flag should be same like generic_write_sync()
Linus Torvalds [Tue, 5 Aug 2025 13:02:07 +0000 (16:02 +0300)]
Merge tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "mseal cleanups" (Lorenzo Stoakes)
Some mseal cleaning with no intended functional change.
- "Optimizations for khugepaged" (David Hildenbrand)
Improve khugepaged throughput by batching PTE operations for large
folios. This gain is mainly for arm64.
- "x86: enable EXECMEM_ROX_CACHE for ftrace and kprobes" (Mike Rapoport)
A bugfix, additional debug code and cleanups to the execmem code.
- "mm/shmem, swap: bugfix and improvement of mTHP swap in" (Kairui Song)
Bugfixes, cleanups and performance improvememnts to the mTHP swapin
code"
* tag 'mm-stable-2025-08-03-12-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (38 commits)
mm: mempool: fix crash in mempool_free() for zero-minimum pools
mm: correct type for vmalloc vm_flags fields
mm/shmem, swap: fix major fault counting
mm/shmem, swap: rework swap entry and index calculation for large swapin
mm/shmem, swap: simplify swapin path and result handling
mm/shmem, swap: never use swap cache and readahead for SWP_SYNCHRONOUS_IO
mm/shmem, swap: tidy up swap entry splitting
mm/shmem, swap: tidy up THP swapin checks
mm/shmem, swap: avoid redundant Xarray lookup during swapin
x86/ftrace: enable EXECMEM_ROX_CACHE for ftrace allocations
x86/kprobes: enable EXECMEM_ROX_CACHE for kprobes allocations
execmem: drop writable parameter from execmem_fill_trapping_insns()
execmem: add fallback for failures in vmalloc(VM_ALLOW_HUGE_VMAP)
execmem: move execmem_force_rw() and execmem_restore_rox() before use
execmem: rework execmem_cache_free()
execmem: introduce execmem_alloc_rw()
execmem: drop unused execmem_update_copy()
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
mm/rmap: add anon_vma lifetime debug check
mm: remove mm/io-mapping.c
...
s390/mm: Allocate page table with PAGE_SIZE granularity
Make vmem_pte_alloc() consistent by always allocating page table of
PAGE_SIZE granularity, regardless of whether page_table_alloc() (with
slab) or memblock_alloc() is used. This ensures page table can be fully
freed when the corresponding page table entries are removed.
Fixes: d08d4e7cd6bf ("s390/mm: use full 4KB page for 2KB PTE") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO") 691efbedc60d ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO") 2ff906994b6c ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO") 2b2a25845d53 ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Tiezhu Yang [Tue, 5 Aug 2025 11:00:22 +0000 (19:00 +0800)]
LoongArch: BPF: Set bpf_jit_bypass_spec_v1/v4()
JITs can set bpf_jit_bypass_spec_v1/v4() if they want the verifier to
skip analysis/patching for the respective vulnerability, it is safe to
set both bpf_jit_bypass_spec_v1/v4(), because there is no speculation
barrier instruction for LoongArch.
Suggested-by: Luis Gerhorst <luis.gerhorst@fau.de> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Haoran Jiang [Tue, 5 Aug 2025 11:00:22 +0000 (19:00 +0800)]
LoongArch: BPF: Fix the tailcall hierarchy
In specific use cases combining tailcalls and BPF-to-BPF calls，
MAX_TAIL_CALL_CNT won't work because of missing tail_call_cnt
back-propagation from callee to caller. This patch fixes this
tailcall issue caused by abusing the tailcall in bpf2bpf feature
on LoongArch like the way of "bpf, x64: Fix tailcall hierarchy".
Push tail_call_cnt_ptr and tail_call_cnt into the stack,
tail_call_cnt_ptr is passed between tailcall and bpf2bpf,
uses tail_call_cnt_ptr to increment tail_call_cnt.
Haoran Jiang [Tue, 5 Aug 2025 11:00:22 +0000 (19:00 +0800)]
LoongArch: BPF: Fix jump offset calculation in tailcall
The extra pass of bpf_int_jit_compile() skips JIT context initialization
which essentially skips offset calculation leaving out_offset = -1, so
the jmp_offset in emit_bpf_tail_call is calculated by
"#define jmp_offset (out_offset - (cur_offset))"
is a negative number, which is wrong. The final generated assembly are
as follow.
Chenghao Duan [Tue, 5 Aug 2025 11:00:18 +0000 (19:00 +0800)]
LoongArch: BPF: Add basic bpf trampoline support
BPF trampoline is the critical infrastructure of the BPF subsystem,
acting as a mediator between kernel functions and BPF programs. Numerous
important features, such as using BPF program for zero overhead kernel
introspection, rely on this key component.
The related tests have passed, including the following technical points:
1. fentry
2. fmod_ret
3. fexit
The following related testcases passed on LoongArch:
sudo ./test_progs -a fentry_test/fentry
sudo ./test_progs -a fexit_test/fexit
sudo ./test_progs -a fentry_fexit
sudo ./test_progs -a modify_return
sudo ./test_progs -a fexit_sleep
sudo ./test_progs -a test_overhead
sudo ./test_progs -a trampoline_count
This issue was first reported by Geliang Tang in June 2024 while
debugging MPTCP BPF selftests on a LoongArch machine (see commit eef0532e900c "selftests/bpf: Null checks for links in bpf_tcp_ca").
Geliang, Huacai, and Tiezhu then worked together to drive the
implementation of this feature, encouraging broader collaboration among
Chinese kernel engineers.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507100034.wXofj6VX-lkp@intel.com/ Reported-by: Geliang Tang <geliang@kernel.org> Tested-by: Tiezhu Yang <yangtiezhu@loongson.cn> Tested-by: Vincent Li <vincent.mc.li@gmail.com> Co-developed-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Chenghao Duan [Tue, 5 Aug 2025 11:00:18 +0000 (19:00 +0800)]
LoongArch: BPF: Add dynamic code modification support
This commit adds support for BPF dynamic code modification on the
LoongArch architecture:
1. Add bpf_arch_text_copy() for instruction block copying.
2. Add bpf_arch_text_poke() for runtime instruction patching.
3. Add bpf_arch_text_invalidate() for code invalidation.
On LoongArch, since symbol addresses in the direct mapping region can't
be reached via relative jump instructions from the paged mapping region,
we use the move_imm+jirl instruction pair as absolute jump instructions.
These require 2-5 instructions, so we reserve 5 NOP instructions in the
program as placeholders for function jumps.
The larch_insn_text_copy() function is solely used for BPF. And the use
of larch_insn_text_copy() requires PAGE_SIZE alignment. Currently, only
the size of the BPF trampoline is page-aligned.
Co-developed-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Jason Wang [Tue, 29 Jul 2025 07:39:16 +0000 (15:39 +0800)]
vhost: initialize vq->nheads properly
Commit 7918bb2d19c9 ("vhost: basic in order support") introduces
vq->nheads to store the number of batched used buffers per used elem
but it forgets to initialize the vq->nheads to NULL in
vhost_dev_init() this will cause kfree() that would try to free it
without be allocated if SET_OWNER is not called.
Reported-by: JAEHOON KIM <jhkim@linux.ibm.com> Reported-by: Breno Leitao <leitao@debian.org> Fixes: 45347e79b544 ("vhost: basic in order support") Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250729073916.80647-1-jasowang@redhat.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com> Tested-by: Breno Leitao <leitao@debian.org> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Tested-by: Jaehoon Kim <jhkim@linux.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
When making ZL3073X invisible, it was overlooked that ZL3073X depends on
NET, while ZL3073X_I2C and ZL3073X_SPI do not, causing:
WARNING: unmet direct dependencies detected for ZL3073X when selected by ZL3073X_I2C
WARNING: unmet direct dependencies detected for ZL3073X when selected by ZL3073X_SPI
WARNING: unmet direct dependencies detected for ZL3073X
Depends on [n]: NET [=n]
Selected by [y]:
- ZL3073X_I2C [=y] && I2C [=y]
Selected by [y]:
- ZL3073X_SPI [=y] && SPI [=y]
Fix this by adding the missing dependencies to ZL3073X_I2C and
ZL3073X_SPI.
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202508022110.nTqZ5Ylu-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202508022351.NHIxPF8j-lkp@intel.com/ Fixes: a4f0866e3dbbf3fe ("dpll: Make ZL3073X invisible") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Ivan Vecera <ivecera@redhat.com> Link: https://patch.msgid.link/20250802155302.3673457-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maher Azzouzi [Sat, 2 Aug 2025 00:18:57 +0000 (17:18 -0700)]
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
TCA_MQPRIO_TC_ENTRY_INDEX is validated using
NLA_POLICY_MAX(NLA_U32, TC_QOPT_MAX_QUEUE), which allows the value
TC_QOPT_MAX_QUEUE (16). This leads to a 4-byte out-of-bounds stack
write in the fp[] array, which only has room for 16 elements (0–15).
Fix this by changing the policy to allow only up to TC_QOPT_MAX_QUEUE - 1.
Fixes: f62af20bed2d ("net/sched: mqprio: allow per-TC user input of FP adminStatus") Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Maher Azzouzi <maherazz04@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://patch.msgid.link/20250802001857.2702497-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using devm_*() [here] is completely wrong, because this is called
from mdiobus_register_device(). This is not the probe function
for the device, and thus there is no code to trigger the release of
the resource on unregistration.
Moreover, when the mdiodev is eventually probed, if the driver fails
or the driver is unbound, the GPIO will be released, but a reference
will be left behind.
Using devm* with a struct device that is *not* currently being probed
is fundamentally wrong - an abuse of devm.
Jakub Kicinski [Fri, 1 Aug 2025 18:16:38 +0000 (11:16 -0700)]
selftests: net: packetdrill: xfail all problems on slow machines
We keep seeing flakes on packetdrill on debug kernels, while
non-debug kernels are stable, not a single flake in 200 runs.
Time to give up, debug kernels appear to suffer from 10msec
latency spikes and any timing-sensitive test is bound to flake.
Quang Le [Fri, 1 Aug 2025 17:54:16 +0000 (13:54 -0400)]
net/packet: fix a race in packet_set_ring() and packet_notifier()
When packet_set_ring() releases po->bind_lock, another thread can
run packet_notifier() and process an NETDEV_UP event.
This race and the fix are both similar to that of commit 15fe076edea7
("net/packet: fix a race in packet_bind() and packet_notifier()").
There too the packet_notifier NETDEV_UP event managed to run while a
po->bind_lock critical section had to be temporarily released. And
the fix was similarly to temporarily set po->num to zero to keep
the socket unhooked until the lock is retaken.
The po->bind_lock in packet_set_ring and packet_notifier precede the
introduction of git history.
be_cmd_set_mac_list() calls dma_free_coherent() under a spin_lock_bh.
Fix it by freeing only after the lock has been released.
Fixes: 1a82d19ca2d6 ("be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20250801101338.72502-1-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are multiple drivers that use the qualcomm mdt loader, but they
have conflicting ideas of how to deal with that dependency when compile-testing
for non-qualcomm targets:
IPA only enables the MDT loader when the kernel config includes ARCH_QCOM,
but the newly added ath12k support always enables it, which leads to a
link failure with the combination of IPA=y and ATH12K=m:
aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_firmware_load':
ipa_main.c:(.text.unlikely+0x134): undefined reference to `qcom_mdt_load
The ATH12K method seems more reliable here, so change IPA over to do the same
thing.
Jakub Kicinski [Mon, 28 Jul 2025 16:31:29 +0000 (09:31 -0700)]
eth: fbnic: unlink NAPIs from queues on error to open
CI hit a UaF in fbnic in the AF_XDP portion of the queues.py test.
The UaF is in the __sk_mark_napi_id_once() call in xsk_bind(),
NAPI has been freed. Looks like the device failed to open earlier,
and we lack clearing the NAPI pointer from the queue.
Fixes: 557d02238e05 ("eth: fbnic: centralize the queue count and NAPI<>queue setting") Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250728163129.117360-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Mon, 4 Aug 2025 23:37:29 +0000 (16:37 -0700)]
Merge tag 'i2c-for-6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"A few more patches from I2C. Some are fixes which would be nice to
have in rc1 already, some patches have nearly been fallen through the
cracks, some just needed a bit more testing.
- acpi: enable 100kHz workaround for DLL0945
- apple: add support for Apple A7–A11, T2 chips; Kconfig update
- mux: mule: fix error handling path
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls"
* tag 'i2c-for-6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: muxes: mule: Fix an error handling path in mule_i2c_mux_probe()
i2c: Force DLL0945 touchpad i2c freq to 100khz
i2c: apple: Drop default ARCH_APPLE in Kconfig
i2c: qcom-geni: fix I2C frequency table to achieve accurate bus rates
dt-bindings: i2c: apple,i2c: Document Apple A7-A11, T2 compatibles
i2c: tegra: Remove dma_sync_*() calls
i2c: tegra: Use internal reset when reset property is not available
i2c: stm32f7: support i2c_*_dma_safe_msg_buf APIs
Linus Torvalds [Mon, 4 Aug 2025 23:27:21 +0000 (16:27 -0700)]
Merge tag 'f2fs-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"Three main updates: folio conversion by Matthew, switch to a new mount
API by Hongbo and Eric, and several sysfs entries to tune GCs for ZUFS
with finer granularity by Daeho.
There are also patches to address bugs and issues in the existing
features such as GCs, file pinning, write-while-dio-read, contingous
block allocation, and memory access violations.
Enhancements:
- switch to new mount API and folio conversion
- add sysfs nodes to controle F2FS GCs for ZUFS
- improve performance on the nat entry cache
- drop inode from the donation list when the last file is closed
- avoid splitting bio when reading multiple pages
Bug fixes:
- fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
- make sure zoned device GC to use FG_GC in shortage of free section
- fix to calculate dirty data during has_not_enough_free_secs()
- fix to update upper_p in __get_secs_required() correctly
- wait for inflight dio completion, excluding pinned files read using dio
- don't break allocation when crossing contiguous sections
- vm_unmap_ram() may be called from an invalid context
- fix to avoid out-of-boundary access in dnode page
- fix to avoid panic in f2fs_evict_inode
- fix to avoid UAF in f2fs_sync_inode_meta()
- fix to use f2fs_is_valid_blkaddr_raw() in do_write_page()
- fix UAF of f2fs_inode_info in f2fs_free_dic
- fix to avoid invalid wait context issue
- fix bio memleak when committing super block
- handle nat.blkaddr corruption in f2fs_get_node_info()
In addition, there are also clean-ups and minor bug fixes"
* tag 'f2fs-for-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (109 commits)
f2fs: drop inode from the donation list when the last file is closed
f2fs: add gc_boost_gc_greedy sysfs node
f2fs: add gc_boost_gc_multiple sysfs node
f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode
f2fs: fix to calculate dirty data during has_not_enough_free_secs()
f2fs: fix to update upper_p in __get_secs_required() correctly
f2fs: directly add newly allocated pre-dirty nat entry to dirty set list
f2fs: avoid redundant clean nat entry move in lru list
f2fs: zone: wait for inflight dio completion, excluding pinned files read using dio
f2fs: ignore valid ratio when free section count is low
f2fs: don't break allocation when crossing contiguous sections
f2fs: remove unnecessary tracepoint enabled check
f2fs: merge the two conditions to avoid code duplication
f2fs: vm_unmap_ram() may be called from an invalid context
f2fs: fix to avoid out-of-boundary access in dnode page
f2fs: switch to the new mount api
f2fs: introduce fs_context_operation structure
f2fs: separate the options parsing and options checking
f2fs: Add f2fs_fs_context to record the mount options
f2fs: Allow sbi to be NULL in f2fs_printk
...
Jesse.Zhang [Mon, 4 Aug 2025 00:43:15 +0000 (08:43 +0800)]
drm/amdgpu: Update SDMA firmware version check for user queue support
This commit fixes a firmware version check for enabling user queue
support in SDMA v7.0. The previous version check (7836028) was
incorrect and could lead to issues with PROTECTED_FENCE_SIGNAL
commands causing register conflicts between MCU_DBG0 and MCU_DBG1.
Fixes: 8c011408ed84 ("drm/amdgpu/sdma7: add ucode version checks for userq support") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92e2449241516c95aab95eea91faecd0fa2b7ed5) Cc: stable@vger.kernel.org
This reverts commit 66abb996999de0d440a02583a6e70c2c24deab45.
This broke custom brightness curves but it wasn't obvious because
of other related changes. Custom brightness curves are always
from a 0-255 input signal. The correct fix was to fix the default
value which was done by [1].
Siyang Liu [Fri, 4 Jul 2025 03:16:22 +0000 (11:16 +0800)]
drm/amd/display: fix a Null pointer dereference vulnerability
[Why]
A null pointer dereference vulnerability exists in the AMD display driver's
(DC module) cleanup function dc_destruct().
When display control context (dc->ctx) construction fails
(due to memory allocation failure), this pointer remains NULL.
During subsequent error handling when dc_destruct() is called,
there's no NULL check before dereferencing the perf_trace member
(dc->ctx->perf_trace), causing a kernel null pointer dereference crash.
[How]
Check if dc->ctx is non-NULL before dereferencing.
Link: https://lore.kernel.org/r/tencent_54FF4252EDFB6533090A491A25EEF3EDBF06@qq.com Co-developed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
(Updated commit text and removed unnecessary error message) Signed-off-by: Siyang Liu <Security@tencent.com> Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dd8e2ba268c636c240a918e0a31e6feaee19404) Cc: stable@vger.kernel.org
Michel Dänzer [Wed, 30 Jul 2025 08:09:02 +0000 (10:09 +0200)]
drm/amd/display: Add primary plane to commits for correct VRR handling
amdgpu_dm_commit_planes calls update_freesync_state_on_stream only for
the primary plane. If a commit affects a CRTC but not its primary plane,
it would previously not trigger a refresh cycle or affect LFC, violating
current UAPI semantics.
Fixes e.g. atomic commits affecting only the cursor plane being limited
to the minimum refresh rate.
Don't do this for the legacy cursor ioctls though, it would break the
UAPI semantics for those.
Suggested-by: Xaver Hugl <xaver.hugl@kde.org> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3034 Signed-off-by: Michel Dänzer <mdaenzer@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cc7bfba95966251b254cb970c21627124da3b7f4) Cc: stable@vger.kernel.org
drm/amdgpu: Retain job->vm in amdgpu_job_prepare_job
The field job->vm is used in function amdgpu_job_run to get the page
table re-generation counter and decide whether the job should be skipped.
Specifically, function amdgpu_vm_generation checks if the VM is valid for this job to use.
For instance, if a gfx job depends on a cancelled sdma job from entity vm->delayed,
then the gfx job should be skipped.
Fixes: 26c95e838e63 ("drm/amdgpu: set the VM pointer to NULL in amdgpu_job_prepare") Signed-off-by: YuanShang <YuanShang.Mao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ed76936c6b10b547c6df4ca75412331e9ef6d339) Cc: stable@vger.kernel.org
Timur Kristóf [Tue, 22 Jul 2025 15:58:30 +0000 (17:58 +0200)]
drm/amd/display: Fix DCE 6.0 and 6.4 PLL programming.
Apparently, both DCE 6.0 and 6.4 have 3 PLLs, but PLL0 can only
be used for DP. Make sure to initialize the correct amount of PLLs
in DC for these DCE versions and use PLL0 only for DP.
Also, on DCE 6.0 and 6.4, the PLL0 needs to be powered on at
initialization as opposed to DCE 6.1 and 7.x which use a different
clock source for DFS.
The following functions were used as reference from the old
radeon driver implementation of DCE 6.x:
- radeon_atom_pick_pll
- atombios_crtc_set_disp_eng_pll
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 35222b5934ec8d762473592ece98659baf6bc48e) Cc: stable@vger.kernel.org
projects / thirdparty / linux.git / log
