In the past, the data for mb-skcipher test has been allocated
twice, that means the first allcated memory area is without
free, which may cause a potential memory leakage. So this
patch is to remove one allocation to fix this error.
The hpda_alloc_ctlr_info() allocates h and its field reply_map. However, in
hpsa_init_one(), if alloc_percpu() failed, the hpsa_init_one() jumps to
clean1 directly, which frees h and leaks the h->reply_map.
Fix by calling hpda_free_ctlr_info() to release h->replay_map and h instead
free h directly.
Fixes: 8b834bff1b73 ("scsi: hpsa: fix selection of reply queue") Signed-off-by: Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221122015751.87284-1-yuancan@huawei.com Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Replace pci_epc_mem_free_addr() with pci_epf_free_space() in the
error handle path to match pci_epf_alloc_space().
Link: https://lore.kernel.org/r/20221102141014.1025893-4-Frank.Li@nxp.com Fixes: e35f56bb0330 ("PCI: endpoint: Support NTB transfer between RC and EP") Signed-off-by: Frank Li <frank.li@nxp.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In accordance with the way the device DT-node is actually defined in
arch/arm64/boot/dts/toshiba/tmpv7708.dtsi and the way the device is probed
by the DW PCIe driver there are two IRQs it actually has. It's MSI IRQ the
DT-bindings lack. Let's extend the interrupts property constraints then
and fix the schema example so one would be acceptable by the actual device
DT-bindings.
Originally as it was defined the legacy bindings the pcie_inbound_axi and
pcie_aux clock names were supposed to be used in the fsl,imx6sx-pcie and
fsl,imx8mq-pcie devices respectively. But the bindings conversion has been
incorrectly so now the fourth clock name is defined as "pcie_inbound_axi
for imx6sx-pcie, pcie_aux for imx8mq-pcie", which is completely wrong.
Let's fix that by conditionally apply the clock-names constraints based on
the compatible string content.
Link: https://lore.kernel.org/r/20221113191301.5526-2-Sergey.Semin@baikalelectronics.ru Fixes: 751ca492f131 ("dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema") Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The av->net_type is not initialized before it is checked in
irdma_modify_qp_roce. This leads to an incorrect update to the ARP cache
and QP context. RoCEv2 connections might fail as result.
Set the net_type using rdma_gid_attr_network_type.
Fixes: 80005c43d4c8 ("RDMA/irdma: Use net_type to check network type") Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Link: https://lore.kernel.org/r/20221122004410.1471-1-shiraz.saleem@intel.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
pci_get_device() will increase the reference count for the returned
pci_dev, and also decrease the reference count for the input parameter
*from* if it is not NULL.
If we break out the loop in node_affinity_init() with 'dev' not NULL, we
need to call pci_dev_put() to decrease the reference count. Add missing
pci_dev_put() in error path.
Fixes: c513de490f80 ("IB/hfi1: Invalid NUMA node information can cause a divide by zero") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20221117131546.113280-1-wangxiongfeng2@huawei.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The user usually configures the number of sge through the max_send_sge
parameter when creating qp, and configures the maximum size of inline data
that can be sent through max_inline_data. Inline uses sge to fill data to
send. Expect the following:
1) When the sge space cannot hold inline data, the sge space needs to be
expanded to accommodate all inline data
2) When the sge space is enough to accommodate inline data, the upper
limit of inline data can be increased so that users can send larger
inline data
Currently case one is not implemented. When the inline data is larger than
the sge space, an error of insufficient sge space occurs. This part of
the code needs to be reimplemented according to the expected rules. The
calculation method of sge num is modified to take the maximum value of
max_send_sge and the sge for max_inline_data to solve this problem.
Fixes: 05201e01be93 ("RDMA/hns: Refactor process of setting extended sge") Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC") Link: https://lore.kernel.org/r/20221108133847.2304539-3-xuhaoyue1@hisilicon.com Signed-off-by: Luoyouming <luoyouming@huawei.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the HNS ROCE driver, The sge is divided into standard sge and extended
sge. There are 2 standard sge in RC/XRC, and the UD standard sge is 0.
In the scenario of RC SQ inline, if the data does not exceed 32bytes, the
standard sge will be used. If it exceeds, only the extended sge will be
used to fill the data.
Currently, when filling the extended sge, max_gs is directly used as the
number of the extended sge, which did not subtract the number of standard
sge. There is a logical error. The new algorithm subtracts the number of
standard sge from max_gs to get the actual number of extended sge.
Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC") Link: https://lore.kernel.org/r/20221108133847.2304539-2-xuhaoyue1@hisilicon.com Signed-off-by: Luoyouming <luoyouming@huawei.com> Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This issue was firstly exposed since commit b18c7da63fcb ("RDMA/rxe: Fix
memory leak in error path code") and then we fixed it in commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") but this
fix was reverted together at last by commit 1e75550648da (Revert
"RDMA/rxe: Create duplicate mapping tables for FMRs")
Simply let rxe_mr_cleanup() always handle freeing the mr->map once it is
successfully allocated.
Fixes: 1e75550648da ("Revert "RDMA/rxe: Create duplicate mapping tables for FMRs"") Link: https://lore.kernel.org/r/1667099073-2-1-git-send-email-lizhijian@fujitsu.com Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before q_num_set() returns.
cryptd is buggy as it tries to use sync_skcipher without going
through the proper sync_skcipher interface. In fact it doesn't
even need sync_skcipher since it's already a proper skcipher and
can easily access the request context instead of using something
off the stack.
Fixes: 36b3875a97b8 ("crypto: cryptd - Remove VLA usage of skcipher") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
If you try to allocate a memory larger than(>=) MAX_ORDER, then kmalloc()
will definitely fail. It creates a stack trace and messes up dmesg. The
user controls the size here so if they specify a too large size it will
fail.
Add __GFP_NOWARN in order to avoid too large allocation warning. This is
detected by static analysis using smatch.
Fixes: 481b5e5c7949 ("scsi: scsi_debug: add resp_write_scat function") Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Link: https://lore.kernel.org/r/20221111100526.1790533-1-harshit.m.mogalapalli@oracle.com Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When allocating PBLE's for a large CQ, it is possible
that a 2-level PBLE is returned which would cause the
CQ allocation to fail since 1-level is assumed and checked for.
Fix this by requesting a level one PBLE only.
The opcode written by HW, in the RQ CQE, is the
RoCEv2/iWARP protocol opcode from the received
packet and not the SW opcode as currently assumed.
Fix this by returning the raw operation type and
queue type in the CQE to irdma_process_cqe and add
2 helpers set_ib_wc_op_sq set_ib_wc_op_rq to map
IRDMA HW op types to IB op types.
Note that for iWARP, only Write with Immediate is
supported so the opcode can only be IB_WC_RECV_RDMA_WITH_IMM
when there is immediate data present.
A malicious user may write undefined values into memory mapped completion
queue elements status or opcode. Undefined status or opcode values will
result in out-of-bounds access to an array mapping siw internal
representation of opcode and status to RDMA core representation when
reaping CQ elements. While siw detects those undefined values, it did not
correctly set completion status to a defined value, thus defeating the
whole purpose of the check.
This bug leads to the following Smatch static checker warning:
When filling a cm_id entry, return "-EAGAIN" instead of 0 if the cm_id
doesn'the have the same port as requested, otherwise an incomplete entry
may be returned, which causes "rdam res show cm_id" to return an error.
For example on a machine with two rdma devices with "rping -C 1 -v -s"
running background, the "rdma" command fails:
$ rdma -V
rdma utility, iproute2-5.19.0
$ rdma res show cm_id
link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 28056 comm rping src-addr 0.0.0.0:7174
error: Protocol not available
While with this fix it succeeds:
$ rdma res show cm_id
link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174
link mlx5_1/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174
The "ib_port" structure must be set before adding the sysfs kobject,
and reset after removing it, otherwise it may crash when accessing
the sysfs node:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000050
Mem abort info:
ESR = 0x96000006
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000e85f5ba5
[0000000000000050] pgd=0000000848fd9003, pud=000000085b387003, pmd=0000000000000000
Internal error: Oops: 96000006 [#2] PREEMPT SMP
Modules linked in: ib_umad(O) mlx5_ib(O) nfnetlink_cttimeout(E) nfnetlink(E) act_gact(E) cls_flower(E) sch_ingress(E) openvswitch(E) nsh(E) nf_nat_ipv6(E) nf_nat_ipv4(E) nf_conncount(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) mst_pciconf(O) ipmi_devintf(E) ipmi_msghandler(E) ipmb_dev_int(OE) mlx5_core(O) mlxfw(O) mlxdevm(O) auxiliary(O) ib_uverbs(O) ib_core(O) mlx_compat(O) psample(E) sbsa_gwdt(E) uio_pdrv_genirq(E) uio(E) mlxbf_pmc(OE) mlxbf_gige(OE) mlxbf_tmfifo(OE) gpio_mlxbf2(OE) pwr_mlxbf(OE) mlx_trio(OE) i2c_mlxbf(OE) mlx_bootctl(OE) bluefield_edac(OE) knem(O) ip_tables(E) ipv6(E) crc_ccitt(E) [last unloaded: mst_pci]
Process grep (pid: 3372, stack limit = 0x0000000022055c92)
CPU: 5 PID: 3372 Comm: grep Tainted: G D OE 4.19.161-mlnx.47.gadcd9e3 #1
Hardware name: https://www.mellanox.com BlueField SoC/BlueField SoC, BIOS BlueField:3.9.2-15-ga2403ab Sep 8 2022
pstate: 40000005 (nZcv daif -PAN -UAO)
pc : hw_stat_port_show+0x4c/0x80 [ib_core]
lr : port_attr_show+0x40/0x58 [ib_core]
sp : ffff000029f43b50
x29: ffff000029f43b50 x28: 0000000019375000
x27: ffff8007b821a540 x26: ffff000029f43e30
x25: 0000000000008000 x24: ffff000000eaa958
x23: 0000000000001000 x22: ffff8007a4ce3000
x21: ffff8007baff8000 x20: ffff8007b9066ac0
x19: ffff8007bae97578 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0000000000000000
x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000
x9 : 0000000000000000 x8 : ffff8007a4ce4000
x7 : 0000000000000000 x6 : 000000000000003f
x5 : ffff000000e6a280 x4 : ffff8007a4ce3000
x3 : 0000000000000000 x2 : aaaaaaaaaaaaaaab
x1 : ffff8007b9066a10 x0 : ffff8007baff8000
Call trace:
hw_stat_port_show+0x4c/0x80 [ib_core]
port_attr_show+0x40/0x58 [ib_core]
sysfs_kf_seq_show+0x8c/0x150
kernfs_seq_show+0x44/0x50
seq_read+0x1b4/0x45c
kernfs_fop_read+0x148/0x1d8
__vfs_read+0x58/0x180
vfs_read+0x94/0x154
ksys_read+0x68/0xd8
__arm64_sys_read+0x28/0x34
el0_svc_common+0x88/0x18c
el0_svc_handler+0x78/0x94
el0_svc+0x8/0xe8
Code: f2955562aa1603e4aa1503e0f9405683 (f9402861)
Fixes: d8a5883814b9 ("RDMA/core: Replace the ib_port_data hw_stats pointers with a ib_port pointer") Signed-off-by: Mark Zhang <markzhang@nvidia.com> Reviewed-by: Michael Guralnik <michaelgur@nvidia.com> Link: https://lore.kernel.org/r/88867e705c42c1cd2011e45201c25eecdb9fef94.1667810736.git.leonro@nvidia.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the PHY is the reference clock provider then it must be initialized
and powered on before the reset on the client is deasserted, otherwise
the link will never come up. The order was changed in cf236e0c0d59.
Restore the correct order to make the driver work again on boards where
the PHY provides the reference clock. This also changes the order for
boards where the Soc is the PHY reference clock divider, but this
shouldn't do any harm.
Link: https://lore.kernel.org/r/20221101095714.440001-1-s.hauer@pengutronix.de Fixes: cf236e0c0d59 ("PCI: imx6: Do not hide PHY driver callbacks and refine the error handling") Tested-by: Richard Zhu <hongxing.zhu@nxp.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
MSI remapping is disabled by VMD driver for Intel's Icelake and
newer systems in order to improve performance by setting
VMCONFIG_MSI_REMAP. By design VMCONFIG_MSI_REMAP register is cleared
by firmware during boot. The same register gets cleared when system
is put in S3 power state. VMD driver needs to set this register again
in order to avoid interrupt issues with devices behind VMD if MSI
remapping was disabled before.
Link: https://lore.kernel.org/r/20221109142652.450998-1-nirmal.patel@linux.intel.com Fixes: ee81ee84f873 ("PCI: vmd: Disable MSI-X remapping when possible") Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Francisco Munoz <francisco.munoz.ruiz@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Correctly set send queue element opcode during immediate work request
flushing in post sendqueue operation, if the QP is in ERROR state.
An undefined ocode value results in out-of-bounds access to an array
for mapping the opcode between siw internal and RDMA core representation
in work completion generation. It resulted in a KASAN BUG report
of type 'global-out-of-bounds' during NFSoRDMA testing.
This patch further fixes a potential case of a malicious user which may
write undefined values for completion queue elements status or opcode,
if the CQ is memory mapped to user land. It avoids the same out-of-bounds
access to arrays for status and opcode mapping as described above.
Fixes: 303ae1cdfdf7 ("rdma/siw: application interface") Fixes: b0fff7317bb4 ("rdma/siw: completion queue methods") Reported-by: Olga Kornievskaia <kolga@netapp.com> Reviewed-by: Tom Talpey <tom@talpey.com> Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20221107145057.895747-1-bmt@zurich.ibm.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla24xx_async_abort_cmd’:
drivers/scsi/qla2xxx/qla_init.c:171:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
171 | uint8_t bail;
| ^~~~
drivers/scsi/qla2xxx/qla_init.c: In function ‘qla2x00_async_tm_cmd’:
drivers/scsi/qla2xxx/qla_init.c:2023:17: warning: variable ‘bail’ set but not used [-Wunused-but-set-variable]
2023 | uint8_t bail;
| ^~~~
commit 18ae8d12991b ("f2fs: show more DIO information in tracepoint")
introduces iocb field in 'f2fs_direct_IO_enter' trace event
And it only assigns the pointer and later it accesses its field
in trace print log.
Unable to handle kernel paging request at virtual address ffffffc04cef3d30
Mem abort info:
ESR = 0x96000007
EC = 0x25: DABT (current EL), IL = 32 bits
Fix it by copying the required variables for printing and while at
it fix the similar issue at some other places in the same file.
Fixes: bd984c03097b ("f2fs: show more DIO information in tracepoint") Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the DPOLICY_BG mode, there is a conflict between
the two conditions "i + 1 < dpolicy->granularity" and
"i < DEFAULT_DISCARD_GRANULARITY". If i = 15, the first
condition is false, it will enter the second condition
and dispatch all small granularity discards in function
__issue_discard_cmd_orderly. The restrictive effect
of the first condition to small discards will be
invalidated. These two conditions should align.
Fixes: 20ee4382322c ("f2fs: issue small discard by LBA order") Signed-off-by: Dongdong Zhang <zhangdongdong1@oppo.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The root cause of this issue is in error path of f2fs_start_discard_thread(),
it missed to invalidate dcc->f2fs_issue_discard, later kthread_stop() may
access invalid pointer.
Fixes: 4d67490498ac ("f2fs: Don't create discard thread when device doesn't support realtime discard") Reported-by: syzbot+035a381ea1afb63f098d@syzkaller.appspotmail.com Reported-by: syzbot+729c925c2d9fc495ddee@syzkaller.appspotmail.com Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Do not cast to "unsigned char", as this needlessly creates type problems
when attempting builds without -Wno-pointer-sign[1]. The intent of the
cast is to drop possible "const" types.
After changes in commit a1bd627b46d1 ("apparmor: share profile name on
replacement"), the hname member of struct aa_policy is not valid slab
object, but a subset of that, it can not be freed by kfree_sensitive(),
use aa_policy_destroy() to fix it.
Fixes: a1bd627b46d1 ("apparmor: share profile name on replacement") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Instead of doing manual queue management, let's use the crypto/engine
for that.
In the same time, rework the requests handling to be easier to
understand (and fix all bugs related to them).
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API") Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The key should not be set in hardware too much in advance, this will
fail it 2 TFM with different keys generate alternative requests.
The key should be stored and used just before doing cipher operations.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API") Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The hardware does not handle 0 size length request, let's add a
fallback.
Furthermore fallback will be used for all unaligned case the hardware
cannot handle.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API") Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
The clock enable/disable at tfm init/exit is fragile,
if 2 tfm are init in the same time and one is removed just after,
it will leave the hardware uncloked even if a user remains.
Instead simply enable clocks at probe time.
We will do PM later.
Fixes: ce0183cb6464b ("crypto: rockchip - switch to skcipher API") Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Because the set/clear SBI_IS_RESIZEFS flag not between any locks,
In the following case:
thread1 thread2
->ioctl(resizefs)
->set RESIZEFS flag ->ioctl(resizefs)
... ->set RESIZEFS flag
->clear RESIZEFS flag
->resizefs stream
# No RESIZEFS flag in the stream
Also before freeze_super, the resizefs not started, we should not set
the SBI_IS_RESIZEFS flag.
So move the set/clear SBI_IS_RESIZEFS flag between the cp_mutex and
gc_lock.
Fixes: b4b10061ef98 ("f2fs: refactor resize_fs to avoid meta updates in progress") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aeaa0bfe89654 ("PCI: dwc: Move N_FTS setup to common setup")
incorrectly uses pci->link_gen in deriving the index to the
n_fts[] array also introducing the issue of accessing beyond the
boundaries of array for greater than Gen-2 speeds. This change fixes
that issue.
Link: https://lore.kernel.org/r/20220926111923.22487-1-vidyas@nvidia.com Fixes: aeaa0bfe8965 ("PCI: dwc: Move N_FTS setup to common setup") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the implementations of cred_label() and set_cred_label(),
we should use pointer to struct aa_label for lbs_cred instead of struct
aa_task_ctx, this patch fixes it.
Fixes: bbd3662a8348 ("Infrastructure management of the cred security blob") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If there is a race between scsi_done() and scsi_timeout() and if
scsi_timeout() loses the race, scsi_timeout() should not reset the request
timer. Hence change the return value for this case from BLK_EH_RESET_TIMER
into BLK_EH_DONE.
Although the block layer holds a reference on a request (req->ref) while
calling a timeout handler, restarting the timer (blk_add_timer()) while a
request is being completed is racy.
Reviewed-by: Mike Christie <michael.christie@oracle.com> Cc: Keith Busch <kbusch@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Hannes Reinecke <hare@suse.de> Reported-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 15f73f5b3e59 ("blk-mq: move failure injection out of blk_mq_complete_request") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221018202958.1902564-2-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a test mode invokes multiple tests (e.g., mode 0 invokes modes
1 through 199, and mode 3 tests three block cipher modes with des),
don't keep accumulating the return values with ret += tcrypt_test(),
which results in a bogus value if more than one report a nonzero
value (e.g., two reporting -2 (-ENOENT) end up reporting -4 (-EINTR)).
Instead, keep track of the minimum return value reported by any
subtest.
Fixes: 4e033a6bc70f ("crypto: tcrypt - Do not exit on success in fips mode") Signed-off-by: Robert Elliott <elliott@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
If alloc_workqueue() fails in nitrox_mbox_init() it deallocates
ndev->iov.vfdev and returns error code, but then nitrox_sriov_init()
calls nitrox_sriov_cleanup() where ndev->iov.vfdev is deallocated
again.
Fix this by nulling ndev->iov.vfdev after the first deallocation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
After the device is reset, the VF needs to re-enable communication
interrupt before the VF sends restart complete message to the PF.
If the interrupt is re-enabled after the VF notifies the PF, the PF
may fail to send messages to the VF after receiving VF's restart
complete message.
Before hardware V3, hardwares do not provide the feature registers,
driver resolves hardware differences based on the hardware version.
As a result, the driver does not support the new hardware.
Hardware V3 and later versions support to obtain hardware features,
such as power-gating management and doorbell isolation, through
the hardware registers. To be compatible with later hardware versions,
the features of the current device is obtained by reading the
hardware registers instead of the hardware version.
The unconfined label flag is not being computed correctly. It
should only be set if all the profiles in the vector are set, which
is different than what is required for the debug and stale flag
that are set if any on the profile flags are set.
Fixes: c1ed5da19765 ("apparmor: allow label to carry debug flags") Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The v8 abi is supported by the kernel but the userspace supported
version check does not allow for it. This was missed when v8 was added
due to a bug in the userspace compiler which was setting an older abi
version for v8 encoding (which is forward compatible except on the
network encoding). However it is possible to detect the network
encoding by checking the policydb network support which the code
does. The end result was that missing the abi flag worked until
userspace was fixed and began correctly checking for the v8 abi
version.
Fixes: 56974a6fcfef ("apparmor: add base infastructure for socket mediation") Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ 1119.158984] ============================================
[ 1119.158988] WARNING: possible recursive locking detected
[ 1119.158996] 6.0.0-rc1+ #257 Tainted: G E N
[ 1119.158999] --------------------------------------------
[ 1119.159001] bash/80100 is trying to acquire lock:
[ 1119.159007] ffff88803e79b4a0 (&ns->lock/1){+.+.}-{4:4}, at: destroy_ns.part.0+0x43/0x140
[ 1119.159028]
but task is already holding lock:
[ 1119.159030] ffff8881009764a0 (&ns->lock/1){+.+.}-{4:4}, at: aa_remove_profiles+0x3f0/0x640
[ 1119.159040]
other info that might help us debug this:
[ 1119.159042] Possible unsafe locking scenario:
In multi_transaction_new(), the variable t is not freed or passed out
on the failure of copy_from_user(t->data, buf, size), which could lead
to a memleak.
Fix this bug by adding a put_multi_transaction(t) in the error path.
Fixes: 1dea3b41e84c5 ("apparmor: speed up transactional queries") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If dsa_tag_8021q_setup() fails, for example due to the inability of the
device to install a VLAN, the tag_8021q context of the switch will leak.
Make sure it is freed on the error path.
Fixes: 328621f6131f ("net: dsa: tag_8021q: absorb dsa_8021q_setup into dsa_tag_8021q_{,un}register") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20221209235242.480344-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Whenever trying to load XDP prog on downed interface, function i40e_xdp
was passing vsi->rx_buf_len field to i40e_xdp_setup() which was equal 0.
i40e_open() calls i40e_vsi_configure_rx() which configures that field,
but that only happens when interface is up. When it is down, i40e_open()
is not being called, thus vsi->rx_buf_len is not set.
Solution for this is calculate buffer length in newly created
function - i40e_calculate_vsi_rx_buf_len() that return actual buffer
length. Buffer length is being calculated based on the same rules
applied previously in i40e_vsi_configure_rx() function.
Fixes: 613142b0bb88 ("i40e: Log error for oversized MTU on device") Fixes: 0c8493d90b6b ("i40e: add XDP support for pass and drop actions") Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Shwetha Nagaraju <Shwetha.nagaraju@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Saeed Mahameed <saeed@kernel.com> Link: https://lore.kernel.org/r/20221209185411.2519898-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the MAC is connected to a 10 Mb/s PHY and the PTP clock is derived
from the MAC reference clock (default), the clk_ptp_rate becomes too
small and the calculated sub second increment becomes 0 when computed by
the stmmac_config_sub_second_increment() function within
stmmac_init_tstamp_counter().
Therefore, the subsequent div_u64 in stmmac_init_tstamp_counter()
operation triggers a divide by 0 exception as shown below.
[ 95.062067] socfpga-dwmac ff700000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 95.076440] socfpga-dwmac ff700000.ethernet eth0: PHY [stmmac-0:08] driver [NCN26000] (irq=49)
[ 95.095964] dwmac1000: Master AXI performs any burst length
[ 95.101588] socfpga-dwmac ff700000.ethernet eth0: No Safety Features support found
[ 95.109428] Division by zero in kernel.
[ 95.113447] CPU: 0 PID: 239 Comm: ifconfig Not tainted 6.1.0-rc7-centurion3-1.0.3.0-01574-gb624218205b7-dirty #77
[ 95.123686] Hardware name: Altera SOCFPGA
[ 95.127695] unwind_backtrace from show_stack+0x10/0x14
[ 95.132938] show_stack from dump_stack_lvl+0x40/0x4c
[ 95.137992] dump_stack_lvl from Ldiv0+0x8/0x10
[ 95.142527] Ldiv0 from __aeabi_uidivmod+0x8/0x18
[ 95.147232] __aeabi_uidivmod from div_u64_rem+0x1c/0x40
[ 95.152552] div_u64_rem from stmmac_init_tstamp_counter+0xd0/0x164
[ 95.158826] stmmac_init_tstamp_counter from stmmac_hw_setup+0x430/0xf00
[ 95.165533] stmmac_hw_setup from __stmmac_open+0x214/0x2d4
[ 95.171117] __stmmac_open from stmmac_open+0x30/0x44
[ 95.176182] stmmac_open from __dev_open+0x11c/0x134
[ 95.181172] __dev_open from __dev_change_flags+0x168/0x17c
[ 95.186750] __dev_change_flags from dev_change_flags+0x14/0x50
[ 95.192662] dev_change_flags from devinet_ioctl+0x2b4/0x604
[ 95.198321] devinet_ioctl from inet_ioctl+0x1ec/0x214
[ 95.203462] inet_ioctl from sock_ioctl+0x14c/0x3c4
[ 95.208354] sock_ioctl from vfs_ioctl+0x20/0x38
[ 95.212984] vfs_ioctl from sys_ioctl+0x250/0x844
[ 95.217691] sys_ioctl from ret_fast_syscall+0x0/0x4c
[ 95.222743] Exception stack(0xd0ee1fa8 to 0xd0ee1ff0)
[ 95.227790] 1fa0: 00574c4fbe9aeca40000000300008914be9aeca4be9aec50
[ 95.235945] 1fc0: 00574c4fbe9aeca40059f07800000036be9aee8cbe9aef7a0000001500000000
[ 95.244096] 1fe0: 005a01f0be9aec38004d7484b6e67d74
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 81be03e026dc ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 9238f36a5a50 ("Bluetooth: Add request cmd_complete and cmd_status functions") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 43eb12d78960 ("Bluetooth: Fix/implement Three-wire reliable packet sending") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 166d2f6a4332 ("[Bluetooth] Add UART driver for Texas Instruments' BRF63xx chips") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 0ff252c1976d ("Bluetooth: hciuart: Add support QCA chipset for UART") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So replace kfree_skb()
with dev_kfree_skb_irq() under spin_lock_irqsave().
Fixes: 803b58367ffb ("Bluetooth: btusb: Implement driver internal packet reassembly") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
skb allocated by __hci_cmd_sync would not be used whether in checking
for supported iBT hardware variants or after, we should free it in all
error branches, this patch makes the case read version failed or default
error case free skb before return.
Fixes: c86c7285bb08 ("Bluetooth: btintel: Fix the legacy bootloader returns tlv based version") Fixes: 019a1caa7fd2 ("Bluetooth: btintel: Refactoring setup routine for bootloader devices") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When validating the parameter length for MGMT_OP_ADD_EXT_ADV_PARAMS
command, use the correct op code in error status report:
was MGMT_OP_ADD_ADVERTISING, changed to MGMT_OP_ADD_EXT_ADV_PARAMS.
Fixes: 12410572833a2 ("Bluetooth: Break add adv into two mgmt commands") Signed-off-by: Inga Stotland <inga.stotland@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If hci_register_suspend_notifier() returns error, the hdev and rfkill
are leaked. We could disregard the error and print a warning message
instead to avoid leaks, as it just means we won't be handing suspend
requests.
Fixes: 9952d90ea288 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recently, a customer reported that from their container whose
net namespace is different to the host's init_net, they can't set
the container's net.sctp.rto_max to any value smaller than
init_net.sctp.rto_min.
For instance,
Host:
sudo sysctl net.sctp.rto_min
net.sctp.rto_min = 1000
This is caused by the check made from this'commit 4f3fdf3bc59c
("sctp: add check rto_min and rto_max in sysctl")'
When validating the input value, it's always referring the boundary
value set for the init_net namespace.
Having container's rto_max smaller than host's init_net.sctp.rto_min
does make sense. Consider that the rto between two containers on the
same host is very likely smaller than it for two hosts.
So to fix this problem, as suggested by Marcelo, this patch makes the
extra pointers of rto_min, rto_max, pf_retrans, and ps_retrans point
to the corresponding variables from the newly created net namespace while
the new net namespace is being registered in sctp_sysctl_net_register.
Fixes: 4f3fdf3bc59c ("sctp: add check rto_min and rto_max in sysctl") Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Firo Yang <firo.yang@suse.com> Link: https://lore.kernel.org/r/20221209054854.23889-1-firo.yang@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
TX/RX callback handlers (ntb_netdev_tx_handler(),
ntb_netdev_rx_handler()) can be called in interrupt
context via the DMA framework when the respective
DMA operations have completed. As such, any calls
by these routines to free skb's, should use the
interrupt context safe dev_kfree_skb_any() function.
Previously, these callback handlers would call the
interrupt unsafe version of dev_kfree_skb(). This has
not presented an issue on Intel IOAT DMA engines as
that driver utilizes tasklets rather than a hard
interrupt handler, like the AMD PTDMA DMA driver.
On AMD systems, a kernel WARNING message is
encountered, which is being issued from
skb_release_head_state() due to in_hardirq()
being true.
Besides the user visible WARNING from the kernel,
the other symptom of this bug was that TCP/IP performance
across the ntb_netdev interface was very poor, i.e.
approximately an order of magnitude below what was
expected. With the repair to use dev_kfree_skb_any(),
kernel WARNINGs from skb_release_head_state() ceased
and TCP/IP performance, as measured by iperf, was on
par with expected results, approximately 20 Gb/s on
AMD Milan based server. Note that this performance
is comparable with Intel based servers.
Fixes: 765ccc7bc3d91 ("ntb_netdev: correct skb leak") Fixes: 548c237c0a997 ("net: Add support for NTB virtual ethernet device") Signed-off-by: Eric Pilmore <epilmore@gigaio.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20221209000659.8318-1-epilmore@gigaio.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes an issue where a read failure of a port statistic counter
will return unknown results. While it is highly unlikely the read will
ever fail, it is much cleaner to return a zero for the stat count.
Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by: Jerry Ray <jerry.ray@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221209153502.7429-1-jerry.ray@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
TCAN4X5X_ERROR_STATUS is not a status register that needs clearing
during interrupt handling. Instead this is a masking register that masks
error interrupts. Writing TCAN4X5X_CLEAR_ALL_INT to this register
effectively masks everything.
Rename the register and mask all error interrupts only once by writing
to the register in tcan4x5x_init.
Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20221206115728.1056014-10-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we try to access the mcan message ram addresses during the probe,
hclk is gated by any other drivers or disabled, because of that probe
gets failed.
Move the mram init functionality to mcan chip config called by
m_can_start from mcan open function, by that time clocks are
enabled.
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Vivek Yadav <vivek.2311@samsung.com> Link: https://lore.kernel.org/all/20221207100632.96200-2-vivek.2311@samsung.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stable-dep-of: 67727a17a6b3 ("can: tcan4x5x: Fix use of register error status mask") Signed-off-by: Sasha Levin <sashal@kernel.org>
Register 0x824 TCAN4X5X_MCAN_INT_REG is a read-only register. Any writes
to this register do not have any effect.
Remove this write. The m_can driver aldready clears the interrupts in
m_can_isr() by writing to M_CAN_IR which is translated to register
0x1050 which is a writable version of this register.
Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com> Link: https://lore.kernel.org/all/20221206115728.1056014-9-msp@baylibre.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
There are cables that exist that can support speeds in excess of 10GbE.
The driver, however, restricts the EEPROM advertised nominal bitrate to
a specific range, which can prevent usage of cables that can support,
for example, up to 25GbE.
Rather than checking that an active or passive cable supports a specific
range, only check for a minimum supported speed.
Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
SFP+ active and passive cables are copper cables with fixed SFP+ end
connectors. Due to a misinterpretation of this, SFP+ active cables could
end up not being recognized, causing the driver to fail to establish a
connection.
Introduce a new enum in SFP+ cable types, XGBE_SFP_CABLE_FIBER, that is
the default cable type, and handle active and passive cables when they are
specifically detected.
Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
If register unix_stream_proto returns error, unix_dgram_proto needs
be unregistered.
Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Change the behaviour of ip6_datagram_connect to consider the interface
set by the IPV6_UNICAST_IF socket option, similarly to udpv6_sendmsg.
This change is the IPv6 counterpart of the fix for IP_UNICAST_IF.
The tests introduced by that patch showed that the incorrect
behavior is present in IPv6 as well.
This patch fixes the broken test.
Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/r/202210062117.c7eef1a3-oliver.sang@intel.com Fixes: 0e4d354762ce ("net-next: Fix IP_UNICAST_IF option behavior for connected sockets") Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In these two cases, dev_kfree_skb() is called consume the xmited SKB,
so replace it with dev_consume_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In scc_discard_buffers(), dev_kfree_skb() is called to discard the SKBs,
so replace it with dev_kfree_skb_irq().
In scc_net_tx(), dev_kfree_skb() is called to drop the SKB that exceed
queue length, so replace it with dev_kfree_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
In this case, the lock is used to protected 'bp', so we can move
dev_kfree_skb() after the spin_unlock_irqrestore().
Fixes: 4796417417a6 ("dnet: Dave DNET ethernet controller driver (updated)") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in xemaclite_tx_timeout() to
drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in bmac_tx_timeout() to drop
the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in mace_tx_timeout() to drop
the SKB, when tx timeout, so replace it with dev_kfree_skb_irq().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a race condition in vxlan that when deleting a vxlan device
during receiving packets, there is a possibility that the sock is
released after getting vxlan_sock vs from sk_user_data. Then in
later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got
NULL pointer dereference. e.g.
Fix this by waiting for all sk_user_data reader to finish before
releasing the sock.
Reported-by: Jianlin Shi <jishi@redhat.com> Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Fixes: 6a93cc905274 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The root cause is traced to the netdev and fst_card_info are not freed
when removes one fst in fst_remove_one(), which may trigger oom if
repeated insmod and rmmod module.
Fix it by adding free_netdev() and kfree() in fst_remove_one(), just as
the operations on the error handling path in fst_add_one().
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() or consume_skb() from hardware
interrupt context or with hardware interrupts being disabled.
It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead.
The difference between them is free reason, dev_kfree_skb_irq() means
the SKB is dropped in error and dev_consume_skb_irq() means the SKB
is consumed in normal.
In this case, dev_kfree_skb() is called in free_tx_buffers() to drop
the SKBs in tx buffers, when the card is down, so replace it with
dev_kfree_skb_irq() here.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
