Merge tag 'at91-dt-5.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20 #4
It contains one new LAN966 based board, namely pcb8309, a cleanup
on Makefile to sort alphabetically LAN966 entries and 2 cleanups
on bindings.
* tag 'at91-dt-5.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: soc: microchip: use absolute path to other schema
dt-bindings: soc: microchip: drop quotes when not needed
ARM: dts: lan966x: keep lan966 entries alphabetically sorted
ARM: dts: lan966x: add support for pcb8309
dt-bindings: arm: at91: add lan966 pcb8309 board
On pcb8291, can0 and the network driver share some of the GPIOs so only
1 device can be active. Therefore disable can0 as we want to enable the
network driver.
Merge tag 'qcom-arm64-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm ARM64 DTS updates for v5.20
Related to SDM845, the Xiaomi Mi Mix2s is introduced, the DB845c on
SDM845 gains support for the second GPI DMA controller and has the GENI
I2C and SPI instances wired up to their respective GPI DMA controller.
QCS404 USB controller and PHY assignment is corrected and IPQ8074 gains
APCS definition to handle outgoing IPC interrupts.
Lastly a range of Devicetree validation issues are addressed.
Merge tag 'qcom-dts-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
More Qualcomm DTS updates for v5.20
This adds an additional GSBI, hwclock, smem and tsens nodes for IPQ8064,
in addition to fixing up and improving the existing descriptions of the
platform.
USB interrupts are reordered to please the Devicetree binding.
The Light Pulse Generator is defined for PM8941 and LEDs are defined for
the FairPhone2, Nexus 5 and Sony Xperia devices.
* tag 'qcom-dts-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: add rpmcc missing clocks for apq/ipq8064 and msm8660
ARM: dts: qcom: msm8974: Disable remoteprocs by default
ARM: dts: qcom: ipq8064: add missing smem compatible
ARM: dts: qcom: ipq8064: add missing hwlock
ARM: dts: qcom: ipq8064: add speedbin efuse nvmem node
ARM: dts: qcom: ipq8064: fix and add some missing gsbi node
ARM: dts: qcom: ipq8064: reduce pci IO size to 64K
ARM: dts: qcom: ipq8064: disable usb phy by default
ARM: dts: qcom: ipq8064: add missing snps,dwmac compatible for gmac
ARM: dts: qcom: ipq8064: add specific dtsi with smb208 rpm regulators
ARM: dts: qcom: ipq8064: add gsbi6 missing definition
ARM: dts: qcom: ipq8064: add multiple missing pin definition
ARM: dts: qcom: msm8974-hammerhead: Add notification LED
ARM: dts: qcom: msm8974-FP2: Add notification LED
ARM: dts: qcom: msm8974-sony: Enable LPG
ARM: dts: qcom: Add LPG node to pm8941
ARM: dts: qcom: sdx65: reorder USB interrupts
ARM: dts: qcom: apq8064: create tsens device node
Add support for Xiaomi Mi Mix2s (polaris) handsets.
Currently working features:
- UFS
- Touchscreen
- USB 2
- Bluetooth
- Wi-Fi
- GPU
- Venus
- Display (need jdi-fhd-nt35596s panel driver, which I have sent a
patch but it haven't been into upstream yet)
The MSM8916 Longcheer L8150 uses a fallback in compatible:
msm8916-longcheer-l8150.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed:
['longcheer,l8150', 'qcom,msm8916-v1-qrd/9-v1', 'qcom,msm8916'] is too long
Fixes: b72160fa886d ("dt-bindings: qcom: Document bindings for new MSM8916 devices") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20220520123252.365762-2-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Merge tag 'mvebu-dt64-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt64 for 5.20 (part 1)
Add support for Marvell 98DX2530 (and variants)
* tag 'mvebu-dt64-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: marvell: enable the 98DX2530 pinctrl driver
arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
dt-bindings: marvell: Document the AC5/AC5X compatibles
Chris Packham [Tue, 5 Jul 2022 19:09:20 +0000 (22:09 +0300)]
arm64: dts: marvell: Add Armada 98DX2530 SoC and RD-AC5X board
The 98DX2530 SoC is the Control and Management CPU integrated into
the Marvell 98DX25xx and 98DX35xx series of switch chip (internally
referred to as AlleyCat5 and AlleyCat5X).
These files have been taken from the Marvell SDK and lightly cleaned
up with the License and copyright retained.
gregory.clement: use specific cpu type: cortex-a55 instead of armv8 in
cpu nodes, armv8 being reserved for the arm virtual models that are
not meant to implement a particular CPU type.
Merge tag 'mvebu-dt-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/dt
mvebu dt for 5.20 (part 1)
Enable LED to link/activity on turris-omnia (Armada 385 based)
* tag 'mvebu-dt-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: enable LED controller node
ARM: dts: turris-omnia: configure LED[0] pin function to link/activity
qcom-cpufreq-hw finds turbo-mode in the LUT hardware tables
and slaps the flag on the last element, so there's no reason
to add it in the dts, so remove it.
Marek Behún [Mon, 4 Jul 2022 11:36:21 +0000 (13:36 +0200)]
ARM: dts: turris-omnia: configure LED[0] pin function to link/activity
The marvell PHY driver changes the LED[0] pin function to "On - 1000
Mbps Link, Off - Else".
Turris Omnia expects that the function is "On - Link, Blink - Activity,
Off - No link".
Use the `marvell,reg-init` DT property to change the function.
In the future, once netdev trigger will support HW offloading, we will
be able to have this configured via the combination of PHY driver and
leds-turris-omnia driver.
Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Stephan Gerhold [Tue, 12 Jul 2022 12:44:18 +0000 (14:44 +0200)]
ARM: dts: qcom: msm8974: Disable remoteprocs by default
The remoteproc configuration in qcom-msm8974.dtsi is incomplete because
it lacks the regulator supplies that should be added in the board DT
files. Some of the msm8974 boards are currently missing the regulator
supplies and should have the remoteprocs disabled to avoid making use
of the incomplete configuration.
This also fixes dtbs_check warnings after moving "qcom,msm8974-mss-pil"
to DT schema, which rightfully complains that the -supply properties
are missing for some boards:
qcom-apq8074-dragonboard.dtb:
remoteproc@fc880000: 'pll-supply' is a required property
From schema: remoteproc/qcom,msm8916-mss-pil.yaml
remoteproc@fc880000: 'mss-supply' is a required property
From schema: remoteproc/qcom,msm8916-mss-pil.yaml
remoteproc@fc880000: 'oneOf' conditional failed, one must be fixed:
'power-domains' is a required property
'power-domain-names' is a required property, or
'cx-supply' is a required property
'mx-supply' is a required property
Cc: Luca Weiss <luca@z3ntu.xyz> Cc: Konrad Dybcio <konrad.dybcio@somainline.org> Fixes: f300826d27be ("ARM: dts: qcom-msm8974: Sort and clean up nodes") Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220712124421.3129206-4-stephan.gerhold@kernkonzept.com
Add missing hwlock for ipq8064 dtsi provided by qcom,sfpb-mutex.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bjorn: Moved the node inside /soc] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220707102040.1859-2-ansuelsmth@gmail.com
ARM: dts: qcom: ipq8064: reduce pci IO size to 64K
The current value for pci IO is problematic for ath10k wifi card
commonly connected to ipq8064 SoC.
The current value is probably a typo and is actually uncommon to find
1MB IO space even on a x86 arch. Also with recent changes to the pci
driver, pci1 and pci2 now fails to function as any connected device
fails any reg read/write. Reduce this to 64K as it should be more than
enough and 3 * 64K of total IO space doesn't exceed the IO_SPACE_LIMIT
hardcoded for the ARM arch.
ARM: dts: qcom: ipq8064: disable usb phy by default
Disable usb phy by default. When the usb phy were pushed, half of them
were flagged as disabled by mistake.
Correctly disable all usb phy and enable them only if a device actually
use them.
ARM: dts: qcom: ipq8064: add specific dtsi with smb208 rpm regulators
Add specific ipq8064 dtsi with smb208 rpm regulators.
Qcom advise to use this configuration but it's not mandatory and OEM
can decide to implement their own regulators.
smb208 regulators are used to scale CPU voltage, L2 cache voltage and
Ubi32 cores.
There regulators are controlled by rpm and to correctly works gsbi4-i2c
require to be NEVER disabled or rpm will reject any regulator change
request.
Johan Hovold [Fri, 15 Jul 2022 07:02:48 +0000 (09:02 +0200)]
ARM: dts: qcom: sdx65: reorder USB interrupts
Three SoCs did not follow the interrupt order specified by the USB
controller binding.
While keeping the non-SuperSpeed interrupts together seems natural,
reorder the interrupts to match the binding.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bjorn: Split out from arm64 patch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220715070248.19078-5-johan+linaro@kernel.org
Johan Hovold [Fri, 15 Jul 2022 07:02:48 +0000 (09:02 +0200)]
arm64: dts: qcom: reorder USB interrupts
Three SoCs did not follow the interrupt order specified by the USB
controller binding.
While keeping the non-SuperSpeed interrupts together seems natural,
reorder the interrupts to match the binding.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bjorn: Omitted sdx65 part from this patch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220715070248.19078-5-johan+linaro@kernel.org
Johan Hovold [Fri, 15 Jul 2022 07:02:46 +0000 (09:02 +0200)]
arm64: dts: qcom: sc8280xp: fix USB interrupts
The two single-port SC8280XP USB controllers do not have an hs_phy_irq
interrupt. Instead they have a pwr_event interrupt which is distinct
from the former and not yet supported by the driver.
Fix the USB node interrupt names so that they match the devicetree
binding.
Also fix the pwr_event interrupt of the second controller which should
be 811 as noticed by Andrew Halaney.
Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220715070248.19078-3-johan+linaro@kernel.org
Johan Hovold [Fri, 15 Jul 2022 07:02:45 +0000 (09:02 +0200)]
arm64: dts: qcom: sc8280xp: fix USB clock order and naming
Fix the USB controller clock order and naming so that they match the
devicetree binding.
Note that the driver currently simply enables all clocks in the order
that they are specified in the devicetree. Reordering the clocks as per
the binding means that the only explicit ordering constraint found in
the vendor driver, that cfg_noc should be enabled before the core_clk,
is now honoured.
Merge tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 5.20, second part, please pull the following:
- Rafal adds basic support for the BCM4912-based router Asus GT-AX6000,
he also has ARCH_BCM4908 select ARCH_BCMBCA such that in the next cycle
we can remove ARCH_BCM4908 and continue to have make oldconfig work.
Finally he spells out what BCA means to make it clearer
* tag 'arm-soc/for-5.20/devicetree-arm64-part2' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Include full family name in Kconfig
arm64: make ARCH_BCM4908 select ARCH_BCMBCA
arm64: dts: Add base DTS file for bcmbca device Asus GT-AX6000
Currently the DT for QCS404 SoC has setup for 2 USB2 PHYs with one each
assigned to USB3 controller and USB2 controller. This assignment is
incorrect which only works by luck: as when each USB HCI comes up it
configures the *other* controllers PHY which is enough to make them
happy. If, for any reason, we were to disable one of the controllers then
both would stop working.
This was a difficult inconsistency to be caught which was found while
trying to enable USB support in u-boot. So with all the required drivers
ported to u-boot, I couldn't get the same USB storage device enumerated
in u-boot which was being enumerated fine by the kernel.
The root cause of the problem came out to be that I wasn't enabling USB2
PHY: "usb2_phy_prim" in u-boot. Then I realised that via simply disabling
the same USB2 PHY currently assigned to USB2 host controller in the
kernel disabled enumeration for USB3 host controller as well.
So fix this inconsistency by correctly assigning USB2 PHYs.
Fixes: 9375e7d719b3 ("arm64: dts: qcom: qcs404: Add USB devices and PHYs") Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220711083038.1518529-1-sumit.garg@linaro.org
arm64: dts: qcom: sc7280: drop unused clocks from eDP node
The eDP node includes two clocks which are used by the eDP PHY rather
than eDP controller itself. Drop these clocks to remove extra difference
between eDP and DP controllers.
arm64: dts: qcom: sc7280: drop address/size-cells from eDP node
Drop #address/#size-cells from eDP device node. For eDP the panels are
not described directly under the controller node. They are either
present under aux-bus child node, or they are declared separately (e.g.
in a /soc node).
arm64: dts: qcom: sc7280: drop #clock-cells from displayport-controller
Drop #clock-cells from DP device node. It is a leftover from the times
before splitting the deviice into controller and PHY devices. Now the
clocks are provided by the PHY, while the controller doesn't provide any
clocks.
arm64: dts: qcom: sc7280: split register block for DP controller
Follow the schema for the DP controller and declare 5 register regions
instead of using a single region for all the registers. Note, this
extends the dts by adding p1 region to the DP node (to be used for DP
MST).
arm64: dts: qcom: sc7180: drop #clock-cells from displayport-controller
Drop #clock-cells from DP device node. It is a leftover from the times
before splitting the device into controller and PHY devices. Now the
clocks are provided by the PHY, while the controller doesn't provide any
clocks.
arm64: dts: qcom: sc7180: split register block for DP controller
Follow the schema for the DP controller and declare 5 register regions
instead of using a single region for all the registers. Note, this
extends the dts by adding p1 region to the DP node (to be used for DP
MST).
Marijn Suijten [Sat, 7 May 2022 15:36:27 +0000 (17:36 +0200)]
arm64: dts: qcom: msm8998: Make regulator voltages multiple of step-size
These voltages are not a multiple of the given step-size 8000 (with base
voltage 1664000) in pm8998_pldo, resulting in PLDO regulators l18 and
l22 failing to validate and in turn not probing the rpm-pm8998-regulator
driver:
Marijn Suijten [Sat, 7 May 2022 22:46:45 +0000 (00:46 +0200)]
arm64: dts: qcom: sm6350: Replace literal rpmhpd indices with constants
It seems the SM6350_CX definition was temporarily replaced with its
literal value 0 in 1797e1c9a95c ("arm64: dts: qcom: sm6350: Add SDHCI1/2
nodes") to prevent a dependency on the qcom-rpmpd.h header patch being
available prior to this DT patch being applied, similar to c23f1b77358c
("arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX").
However, unlike the revert of that in the sm6125 tree the next merge
window around in a90b8adfa2dd ("Revert "arm64: dts: qcom: sm6125: Avoid
using missing SM6125_VDDCX""), this has not yet happened for sm6350:
replace them back now that the definitions are definitely available.
Robert Marko [Thu, 7 Jul 2022 17:37:33 +0000 (19:37 +0200)]
arm64: dts: qcom: ipq8074: add APCS node
APCS now has support for providing the APSS clocks as the child device
for IPQ8074.
So, add the required DT node for it as it will later be used as the CPU
clocksource.
Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
[bjorn: Sorted node based on address] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220707173733.404947-4-robimarko@gmail.com
BCA is a big set / family of devices sharing multiple hardware blocks.
It covers BCM4908, BCM63xx, BCM68xx devices and more.
Most of drivers that depend on ARCH_BCM4908 should actually depend on
ARCH_BCMBCA. To make such transition easier, cleaner and breakage-free
add a proper "select".
Later on - if we decide to keep ARCH_BCM4908 - it may be moved under
ARCH_BCMBCA menu. Keeping it may be helpful for limited compiling of DTS
files and "default" Kconfig entires. Or we may just decide to drop it.
projects / people / ms / linux.git / log
