The current code uses a lot of casts to access the fields member in struct
synth_trace_events with different sizes. This makes the code hard to
read, and had already introduced an endianness bug. Use a union and struct
instead.
Link: https://lkml.kernel.org/r/20230816154928.4171614-2-svens@linux.ibm.com Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 00cf3d672a9dd ("tracing: Allow synthetic events to pass around stacktraces") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 887f92e09ef3 ("tracing/synthetic: Skip first entry for stack traces") Signed-off-by: Sasha Levin <sashal@kernel.org>
The root cause is that:
1. After `echo 0 > tracing_cpumask`, 'record_disabled' of cpu buffers
in 'tr->array_buffer.buffer' became 1 (see tracing_set_cpumask());
2. After `echo 1 > snapshot`, 'tr->array_buffer.buffer' is swapped
with 'tr->max_buffer.buffer', then the 'record_disabled' became 0
(see update_max_tr());
3. After `echo fff > tracing_cpumask`, the 'record_disabled' become -1;
Then array_buffer and max_buffer are both unavailable due to value of
'record_disabled' is not 0.
To fix it, enable or disable both array_buffer and max_buffer at the same
time in tracing_set_cpumask().
Link: https://lkml.kernel.org/r/20230805033816.3284594-2-zhengyejian1@huawei.com Cc: <mhiramat@kernel.org> Cc: <vnagarnaik@google.com> Cc: <shuah@kernel.org> Fixes: 71babb2705e2 ("tracing: change CPU ring buffer state from tracing_cpumask") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the code to use the PTP HW clock was added, it didn't update
the Kconfig entry for the PTP dependency, leading to build errors,
so update the Kconfig entry to depend on PTP_1588_CLOCK_OPTIONAL.
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_init':
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294: undefined reference to `ptp_clock_register'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294:(.text+0xce8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301: undefined reference to `ptp_clock_index'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301:(.text+0xd18): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_remove':
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315: undefined reference to `ptp_clock_index'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315:(.text+0xe80): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319: undefined reference to `ptp_clock_unregister'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319:(.text+0xeac): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_unregister'
Fixes: 1595ecce1cf3 ("wifi: iwlwifi: mvm: add support for PTP HW clock (PHC)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202308110447.4QSJHmFH-lkp@intel.com/ Cc: Krishnanand Prabhu <krishnanand.prabhu@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Gregory Greenman <gregory.greenman@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230812052947.22913-1-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's a bug in the concurrent scenario of unregister_netdevice_many()
and raw_release() as following:
cpu0 cpu1
unregister_netdevice_many(can_dev)
unlist_netdevice(can_dev) // dev_get_by_index() return NULL after this
net_set_todo(can_dev)
raw_release(can_socket)
dev = dev_get_by_index(, ro->ifindex); // dev == NULL
if (dev) { // receivers in dev_rcv_lists not free because dev is NULL
raw_disable_allfilters(, dev, );
dev_put(dev);
}
...
ro->bound = 0;
...
call_netdevice_notifiers(NETDEV_UNREGISTER, )
raw_notify(, NETDEV_UNREGISTER, )
if (ro->bound) // invalid because ro->bound has been set 0
raw_disable_allfilters(, dev, ); // receivers in dev_rcv_lists will never be freed
Add a net_device pointer member in struct raw_sock to record bound
can_dev, and use rtnl_lock to serialize raw_socket members between
raw_bind(), raw_release(), raw_setsockopt() and raw_notify(). Use
ro->dev to decide whether to free receivers in dev_rcv_lists.
Fixes: 8d0caedb7596 ("can: bcm/raw/isotp: use per module netdevice notifier") Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/all/20230711011737.1969582-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before removing checkpoint buffer from the t_checkpoint_list, we have to
check both BH_Dirty and BH_Lock bits together to distinguish buffers
have not been or were being written back. But __cp_buffer_busy() checks
them separately, it first check lock state and then check dirty, the
window between these two checks could be raced by writing back
procedure, which locks buffer and clears buffer dirty before I/O
completes. So it cannot guarantee checkpointing buffers been written
back to disk if some error happens later. Finally, it may clean
checkpoint transactions and lead to inconsistent filesystem.
jbd2_journal_forget() and __journal_try_to_free_buffer() also have the
same problem (journal_unmap_buffer() escape from this issue since it's
running under the buffer lock), so fix them through introducing a new
helper to try holding the buffer lock and remove really clean buffer.
journal_clean_one_cp_list() and journal_shrink_one_cp_list() are almost
the same, so merge them into journal_shrink_one_cp_list(), remove the
nr_to_scan parameter, always scan and try to free the whole checkpoint
list.
wait till linux guest boots, then hotplug device:
(qemu) device_add qxl,bus=rp1
hotplug on guest side fails with:
pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff]
pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff]
pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x001f]
pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000]
pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000]
pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000]
pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000]
pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff]
pci 0000:01:00.0: BAR 3: assigned [io 0x1000-0x101f]
qxl 0000:01:00.0: enabling device (0000 -> 0003)
Unable to create vram_mapping
qxl: probe of 0000:01:00.0 failed with error -12
However when using native PCIe hotplug
'-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off'
it works fine, since kernel attempts to reassign unused resources.
Use the same machinery as native PCIe hotplug to (re)assign resources.
Link: https://lore.kernel.org/r/20230424191557.2464760-1-imammedo@redhat.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
On server-initiated disconnect, rpcrdma_xprt_disconnect() was DMA-
unmapping the Receive buffers, but rpcrdma_post_recvs() neglected
to remap them after a new connection had been established. The
result was immediate failure of the new connection with the Receives
flushing with LOCAL_PROT_ERR.
Fixes: 671c450b6fe0 ("xprtrdma: Fix oops in Receive handler after device removal") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Another highly rare error case when a page allocating loop (inside
__nfs4_get_acl_uncached, this time) is not properly unwound on error.
Since pages array is allocated being uninitialized, need to free only
lower array indices. NULL checks were useful before commit 62a1573fcf84
("NFSv4 fix acl retrieval over krb5i/krb5p mounts") when the array had
been initialized to zero on stack.
Found by Linux Verification Center (linuxtesting.org).
There is a slight issue with error handling code inside
nfs42_proc_getxattr(). If page allocating loop fails then we free the
failing page array element which is NULL but __free_page() can't deal with
NULL args.
Found by Linux Verification Center (linuxtesting.org).
In the real workload, I encountered an issue which could cause the RTO
timer to retransmit the skb per 1ms with linear option enabled. The amount
of lost-retransmitted skbs can go up to 1000+ instantly.
The root cause is that if the icsk_rto happens to be zero in the 6th round
(which is the TCP_THIN_LINEAR_RETRIES value), then it will always be zero
due to the changed calculation method in tcp_retransmit_timer() as follows:
Above line could be converted to
icsk->icsk_rto = min(0 << 1, TCP_RTO_MAX) = 0
Therefore, the timer expires so quickly without any doubt.
I read through the RFC 6298 and found that the RTO value can be rounded
up to a certain value, in Linux, say TCP_RTO_MIN as default, which is
regarded as the lower bound in this patch as suggested by Eric.
Fixes: 36e31b0af587 ("net: TCP thin linear timeouts") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
af_unix: Fix null-ptr-deref in unix_stream_sendpage().
Bing-Jhong Billy Jheng reported null-ptr-deref in unix_stream_sendpage()
with detailed analysis and a nice repro.
unix_stream_sendpage() tries to add data to the last skb in the peer's
recv queue without locking the queue.
If the peer's FD is passed to another socket and the socket's FD is
passed to the peer, there is a loop between them. If we close both
sockets without receiving FD, the sockets will be cleaned up by garbage
collection.
The garbage collection iterates such sockets and unlinks skb with
FD from the socket's receive queue under the queue's lock.
So, there is a race where unix_stream_sendpage() could access an skb
locklessly that is being released by garbage collection, resulting in
use-after-free.
To avoid the issue, unix_stream_sendpage() must lock the peer's recv
queue.
Note the issue does not exist in 6.5+ thanks to the recent sendpage()
refactoring.
This patch is originally written by Linus Torvalds.
The tests were made with a specific workload, further tests on a
recently updated fedora 38 system with a system wide perf.data file
shows 'perf report' taking excessive time resolving inlines in vmlinux,
so lets revert this until a full investigation and improvement on the
addr2line support code is made.
Reported-by: Jesper Dangaard Brouer <hawk@kernel.org> Acked-by: Artem Savkov <asavkov@redhat.com> Tested-by: Jesper Dangaard Brouer <hawk@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/ZMl8VyhdwhClTM5g@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This can clean up all irq warnings because of unbalanced
amdgpu_irq_get/put when unplugging/unbinding device, and leave
irq count decrease in each ip fini function.
Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vangogh driver just gained a link time dependency that now causes
randconfig builds to fail:
x86_64-linux-ld: sound/soc/amd/vangogh/pci-acp5x.o: in function `snd_acp5x_probe':
pci-acp5x.c:(.text+0xbb): undefined reference to `snd_amd_acp_find_config'
Fixes: e89f45edb747e ("ASoC: amd: vangogh: Add check for acp config flags in vangogh platform") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230602124447.863476-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GFX v11.0.1 reported fence fallback timer expired issue on
SDMA and GFX rings after S0ix resume. This is generated by
EOP interrupts are disabled when S0ix suspend but fails to
re-enable when resume because of the GFX is in GFXOFF.
[ 203.349571] [drm] Fence fallback timer expired on ring sdma0
[ 203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0
[ 203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0
For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers
to configure the fence driver interrupts for rings that belong to GFX.
The interrupts configuration will be restored by GFXOFF exit.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DCN 3.1.4 is reported to hang on s2idle entry if graphics activity
is happening during entry. This is because GFXOFF was scheduled as
delayed but RLC gets disabled in s2idle entry sequence which will
hang GFX IP if not already in GFXOFF.
To help this problem, flush any delayed work for GFXOFF early in
s2idle entry sequence to ensure that it's off when RLC is changed.
commit 4b31b92b143f ("drm/amdgpu: complete gfxoff allow signal during
suspend without delay") modified power gating flow so that if called
in s0ix that it ensured that GFXOFF wasn't put in work queue but
instead processed immediately.
This is dead code due to commit 10cb67eb8a1b ("drm/amdgpu: skip
CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly
called as part of the suspend entry code. Remove that dead code.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3f9ffce5765d ("drm/i915: Do panel VBT init early if the VBT
declares an explicit panel type") started using -1 as the value for
unset panel_type. It gets initialized in intel_panel_init_alloc(), but
the SDVO code never calls it.
Call intel_panel_init_alloc() to initialize the panel, including the
panel_type.
Reported-by: Tomi Leppänen <tomi@tomin.site> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8896 Fixes: 3f9ffce5765d ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.1+ Reviewed-by: Uma Shankar <uma.shankar@intel.com> Tested-by: Tomi Leppänen <tomi@tomin.site> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230803122706.838721-1-jani.nikula@intel.com
(cherry picked from commit 26e60294e8eacedc8ebb33405b2c375fd80e0900) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears MPC_SPLIT_DYNAMIC still causes problems with multiple
displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP.
This increases power usage with multiple displays, but avoids hangs.
Commit ca62297b2085 ("drm/edid: Fix csync detailed mode parsing") fixed
EDID detailed mode sync parsing. Unfortunately, there are quite a few
displays out there that have bogus (zero) sync field that are broken by
the change. Zero means analog composite sync, which is not right for
digital displays, and the modes get rejected. Regardless, it used to
work, and it needs to continue to work. Revert the change.
Rejecting modes with analog composite sync was the part that fixed the
gitlab issue 8146 [1]. We'll need to get back to the drawing board with
that.
qxl_mode_dumb_create() dereferences the qobj returned by
qxl_gem_object_create_with_handle(), but the handle is the only one
holding a reference to it.
A potential attacker could guess the returned handle value and closes it
between the return of qxl_gem_object_create_with_handle() and the qobj
usage, triggering a use-after-free scenario.
Reproducer:
int dri_fd =-1;
struct drm_mode_create_dumb arg = {0};
==================================================================
BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
Write of size 1 at addr ffff88801136c240 by task poc/515
The buggy address belongs to the object at ffff88801136c000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 576 bytes inside of
freed 1024-byte region [ffff88801136c000, ffff88801136c400)
Instead of returning a weak reference to the qxl_bo object, return the
created drm_gem_object and let the caller decrement the reference count
when it no longer needs it. As a convenience, if the caller is not
interested in the gobj object, it can pass NULL to the parameter and the
reference counting is descremented internally.
The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940).
When mmc allocation succeeds, the error paths are not freeing mmc.
Fix the above issue by changing mmc_alloc_host() to devm_mmc_alloc_host()
to simplify the error handling. Remove label 'probe_free_host' as devm_*
api takes care of freeing, also remove mmc_free_host() from remove
function as devm_* takes care of freeing.
mmc_add_host() may return error, if we ignore its return value,
1. the memory allocated in mmc_alloc_host() will be leaked
2. null-ptr-deref will happen when calling mmc_remove_host()
in remove function spmmc_drv_remove() because deleting not
added device.
Fix this by checking the return value of mmc_add_host(). Moreover,
I fixed the error handling path of spmmc_drv_probe() to clean up.
For a completed request, after the mmc_blk_mq_complete_rq(mq, req)
function is executed, the bitmap_tags corresponding to the
request will be cleared, that is, the request will be regarded as
idle. If the request is acquired by a different type of process at
this time, the issue_type of the request may change. It further
caused the value of mq->in_flight[issue_type] to be abnormal,
and a large number of requests could not be sent.
When commit 716c330433e3 ("media: uvcvideo: Use standard names for
menus") reworked the handling of menu controls, it inadvertently
replaced a GENMASK(n - 1, 0) with a BIT_MASK(n). The latter isn't
equivalent to the former, which broke adding XU mappings from userspace.
Fix it.
blk_crypto_profile_init() calls lockdep_register_key(), which warns and
does not register if the provided memory is a static object.
blk-crypto-fallback currently has a static blk_crypto_profile and calls
blk_crypto_profile_init() thereupon, resulting in the warning and
failure to register.
Fortunately it is simple enough to use a dynamically allocated profile
and make lockdep function correctly.
Fixes: 2fb48d88e77f ("blk-crypto: use dynamic lock class for blk_crypto_profile::lock") Cc: stable@vger.kernel.org Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20230817141615.15387-1-sweettea-kernel@dorminy.me Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the value of ZT is set via ptrace we don't disable traps for SME.
This means that when a the task has never used SME before then the value
set via ptrace will never be seen by the target task since it will
trigger a SME access trap which will flush the register state.
Disable SME traps when setting ZT, this means we also need to allocate
storage for SVE if it is not already allocated, for the benefit of
streaming SVE.
When we use NT_ARM_SSVE to either enable streaming mode or change the
vector length for a process we do not currently do anything to ensure that
there is storage allocated for the SME specific register state. If the
task had not previously used SME or we changed the vector length then
the task will not have had TIF_SME set or backing storage for ZA/ZT
allocated, resulting in inconsistent register sizes when saving state
and spurious traps which flush the newly set register state.
We should set TIF_SME to disable traps and ensure that storage is
allocated for ZA and ZT if it is not already allocated. This requires
modifying sme_alloc() to make the flush of any existing register state
optional so we don't disturb existing state for ZA and ZT.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Reported-by: David Spickett <David.Spickett@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> # 5.19.x Link: https://lore.kernel.org/r/20230810-arm64-fix-ptrace-race-v1-1-a5361fad2bd6@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes an issue affecting the Wifi/Bluetooth connectivity on
ROCK Pi 4 boards. Commit f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth
on ROCK Pi 4 boards") introduced a problem with the clock configuration.
Specifically, the clock-names property of the sdio-pwrseq node was not
updated to 'lpo', causing the driver to wait indefinitely for the wrong clock
signal 'ext_clock' instead of the expected one 'lpo'. This prevented the proper
initialization of Wifi/Bluetooth chip on ROCK Pi 4 boards.
To address this, this patch updates the clock-names property of the
sdio-pwrseq node to "lpo" to align with the changes made to the bluetooth node.
This patch has been tested on ROCK Pi 4B.
Fixes: f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards") Cc: stable@vger.kernel.org Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com> Link: https://lore.kernel.org/r/ZLbATQRjOl09aLAp@zephyrusG14 Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel uses `struct virtio_net_ctrl_rss` to save command-specific-data
for both the VIRTIO_NET_CTRL_MQ_HASH_CONFIG and
VIRTIO_NET_CTRL_MQ_RSS_CONFIG commands.
According to the VirtIO standard, "Field reserved MUST contain zeroes.
It is defined to make the structure to match the layout of
virtio_net_rss_config structure, defined in 5.1.6.5.7.".
Yet for the VIRTIO_NET_CTRL_MQ_HASH_CONFIG command case, the `max_tx_vq`
field in struct virtio_net_ctrl_rss, which corresponds to the
`reserved` field in struct virtio_net_hash_config, is not zeroed,
thereby violating the VirtIO standard.
This patch solves this problem by zeroing this field in
virtnet_init_default_rss().
Two versions of the original patch were sent but V1 was merged instead
of V2 due to a mistake.
So update to V2.
The advantage of V2 is that it completely avoids dereferencing the pointer,
even just to take the address, which may fix problems with some compilers.
Both versions work on my gcc 9.4 but use the safer one.
Fixes: 98e2dd5f7a8b ("regulator: da9063: fix null pointer deref with partial DT config") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Tested-by: Benjamin Bara <benjamin.bara@skidata.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230804083514.1887124-1-martin.fuzzey@flowbird.group Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit abdb1742a312 removed code that clears ctx->username when sec=none, so attempting
to mount with '-o sec=none' now fails with -EACCES. Fix it by adding that logic to the
parsing of the 'sec' option, as well as checking if the mount is using null auth before
setting the username when parsing the 'user' option.
Fixes: abdb1742a312 ("cifs: get rid of mount options string parsing") Cc: stable@vger.kernel.org Signed-off-by: Scott Mayhew <smayhew@redhat.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the TLB_PTLOCK checks we used an optimization to store the spc
register into the spinlock to unlock it. This optimization works as
long as the lightweight spinlock checks (CONFIG_LIGHTWEIGHT_SPINLOCK_CHECK)
aren't enabled, because they really check if the lock word is zero or
__ARCH_SPIN_LOCK_UNLOCKED_VAL and abort with a kernel crash
("Spinlock was trashed") otherwise.
Drop that optimization to make it possible to activate both checks
at the same time.
Noticed-by: Sam James <sam@gentoo.org> Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Sam James <sam@gentoo.org> Cc: stable@vger.kernel.org # v6.4+ Fixes: 15e64ef6520e ("parisc: Add lightweight spinlock checks") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Under the current code, when cifs_readpage_worker is called, the call
contract is that the callee should unlock the page. This is documented
in the read_folio section of Documentation/filesystems/vfs.rst as:
> The filesystem should unlock the folio once the read has completed,
> whether it was successful or not.
Without this change, when fscache is in use and cache hit occurs during
a read, the page lock is leaked, producing the following stack on
subsequent reads (via mmap) to the page:
This requires a reboot to resolve; it is a deadlock.
Note however that the call to cifs_readpage_from_fscache does mark the
page clean, but does not free the folio lock. This happens in
__cifs_readpage_from_fscache on success. Releasing the lock at that
point however is not appropriate as cifs_readahead also calls
cifs_readpage_from_fscache and *does* unconditionally release the lock
after its return. This change therefore effectively makes
cifs_readpage_worker work like cifs_readahead.
Signed-off-by: Russell Harmon <russ@har.mn> Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Reviewed-by: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unloading a hardware specific 8250 driver can produce error "Unable to
handle kernel paging request at virtual address" about ten seconds after
unloading the driver. This happens on uart_hangup() calling
uart_change_pm().
Turns out commit 04e82793f068 ("serial: 8250: Reinit port->pm on port
specific driver unbind") was only a partial fix. If the hardware specific
driver has initialized port->pm function, we need to clear port->pm too.
Just reinitializing port->ops does not do this. Otherwise serial8250_pm()
will call port->pm() instead of serial8250_do_pm().
Fixes: 04e82793f068 ("serial: 8250: Reinit port->pm on port specific driver unbind") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230804131553.52927-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It was reported that the riscv kernel hangs while executing the test
in [1].
Indeed, the test hangs when trying to write a buffer to a file. The
problem is that the riscv implementation of raw_copy_from_user() does not
return the correct number of bytes not written when an exception happens
and is fixed up, instead it always returns the initial size to copy,
even if some bytes were actually copied.
generic_perform_write() pre-faults the user pages and bails out if nothing
can be written, otherwise it will access the userspace buffer: here the
riscv implementation keeps returning it was not able to copy any byte
though the pre-faulting indicates otherwise. So generic_perform_write()
keeps retrying to access the user memory and ends up in an infinite
loop.
Note that before the commit mentioned in [1] that introduced this
regression, it worked because generic_perform_write() would bail out if
only one byte could not be written.
So fix this by returning the number of bytes effectively not written in
__asm_copy_[to|from]_user() and __clear_user(), as it is expected.
The instructions c.jr and c.jalr must have rs1 != 0, but
riscv_insn_is_c_jr() and riscv_insn_is_c_jalr() do not check for this. So,
riscv_insn_is_c_jr() can match a reserved encoding, while
riscv_insn_is_c_jalr() can match the c.ebreak instruction.
Rewrite them with check for rs1 != 0.
Signed-off-by: Nam Cao <namcaov@gmail.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Fixes: ec5f90877516 ("RISC-V: Move riscv_insn_is_* macros into a common header") Link: https://lore.kernel.org/r/20230731183925.152145-1-namcaov@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When we test seccomp with 6.4 kernel, we found errno has wrong value.
If we deny NETLINK_AUDIT with EAFNOSUPPORT, after f0bddf50586d, we will
get ENOSYS instead. We got same result with commit 9c2598d43510 ("riscv:
entry: Save a0 prior syscall_enter_from_user_mode()").
After analysing code, we think that regs->a0 = -ENOSYS should only be
executed when syscall != -1. In __seccomp_filter, when seccomp rejected
this syscall with specified errno, they will set a0 to return number as
syscall ABI, and then return -1. This return number is finally pass as
return number of syscall_enter_from_user_mode, and then is compared with
NR_syscalls after converted to ulong (so it will be ULONG_MAX). The
condition syscall < NR_syscalls will always be false, so regs->a0 = -ENOSYS
is always executed. It covered a0 set by seccomp, so we always get
ENOSYS when match seccomp RET_ERRNO rule.
Fixes: f0bddf50586d ("riscv: entry: Convert to generic entry") Reported-by: Felix Yan <felixonmars@archlinux.org> Co-developed-by: Ruizhe Pan <c141028@gmail.com> Signed-off-by: Ruizhe Pan <c141028@gmail.com> Co-developed-by: Shiqi Zhang <shiqi@isrc.iscas.ac.cn> Signed-off-by: Shiqi Zhang <shiqi@isrc.iscas.ac.cn> Signed-off-by: Celeste Liu <CoelacanthusHex@gmail.com> Tested-by: Felix Yan <felixonmars@archlinux.org> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Björn Töpel <bjorn@rivosinc.com> Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20230801141607.435192-1-CoelacanthusHex@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Set spec->en_3kpull_low default to true.
Then fillback ALC236 and ALC257 to false.
Additional note: this addresses a regression caused by the previous
fix 69ea4c9d02b7 ("ALSA: hda/realtek - remove 3k pull low procedure").
The previous workaround was applied too widely without necessity,
which resulted in the pop noise at PM again. This patch corrects the
condition and restores the old behavior for the devices that don't
suffer from the original problem.
The existing use of match_string() caused it to reject 'echo foo' due
to the implicitly appended newline, which was somewhat ergonomically
awkward and inconsistent with typical sysfs behavior. Using the
__sysfs_* variant instead provides more convenient and consistent
linefeed-agnostic behavior.
SA8775 and newer target have added support for an increased number of
interrupt targets. To implement this change, the intr_target field, which
is used to configure the interrupt target in the interrupt configuration
register is increased from 3 bits to 4 bits.
In accordance to these updates, a new intr_target_width member is
introduced in msm_pingroup structure. This member stores the value of
width of intr_target field in the interrupt configuration register. This
value is used to dynamically calculate and generate mask for setting the
intr_target field. By default, this mask is set to 3 bit wide, to ensure
backward compatibility with the older targets.
When the tdm lane mask is computed, the driver currently fills the 1st lane
before moving on to the next. If the stream has less channels than the
lanes can accommodate, slots will be disabled on the last lanes.
Unfortunately, the HW distribute channels in a different way. It distribute
channels in pair on each lanes before moving on the next slots.
This difference leads to problems if a device has an interface with more
than 1 lane and with more than 2 slots per lane.
For example: a playback interface with 2 lanes and 4 slots each (total 8
slots - zero based numbering)
- Playing a 8ch stream:
- All slots activated by the driver
- channel #2 will be played on lane #1 - slot #0 following HW placement
- Playing a 4ch stream:
- Lane #1 disabled by the driver
- channel #2 will be played on lane #0 - slot #2
This behaviour is obviously not desirable.
Change the way slots are activated on the TDM lanes to follow what the HW
does and make sure each channel always get mapped to the same slot/lane.
Fixes: 1a11d88f499c ("ASoC: meson: add tdm formatter base driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Although the memory map of i.MX93 reference manual rev. 2 claims that
analog top has start address of 0x44480000 and end address of 0x4448ffff,
this overlaps with TMU memory area starting at 0x44482000, as stated in
section 73.6.1.
As PLL configuration registers start at addresses up to 0x44481400, as used
by clk-imx93, reduce the anatop size to 0x2000, so exclude the TMU area
but keep all PLL registers inside.
Fixes: ec8b5b5058ea ("arm64: dts: freescale: Add i.MX93 dtsi support") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The CSI1 PHY reference clock is limited to 125 MHz according to:
i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020
Table 5-1. Clock Root Table (continued) / page 307
Slice Index n = 123 .
Currently the IMX8MM_CLK_CSI1_PHY_REF clock is configured to be
fed directly from 1 GHz PLL2 , which overclocks them. Instead, drop
the configuration altogether, which defaults the clock to 24 MHz REF
clock input, which for the PHY reference clock is just fine.
Based on a patch from Marek Vasut for the imx8mn.
Fixes: e523b7c54c05 ("arm64: dts: imx8mm: Add CSI nodes") Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
There is some instablity with some eMMC modules on ROCK Pi 4 SBCs running
in HS400 mode. This ends up resulting in some block errors after a while
or after a "heavy" operation utilising the eMMC (e.g. resizing a
filesystem). An example of these errors is as follows:
Disabling the Command Queue seems to stop the CQE recovery from running,
but doesn't seem to improve the I/O errors. Until this can be investigated
further, disable HS400 mode on the ROCK Pi 4 SBCs to at least stop I/O
errors from occurring.
While we are here, set the eMMC maximum clock frequency to 1.5MHz to
follow the ROCK 4C+.
Fixes: 1b5715c602fd ("arm64: dts: rockchip: add ROCK Pi 4 DTS support") Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Tested-By: Folker Schwesinger <dev@folker-schwesinger.de> Link: https://lore.kernel.org/r/20230705144255.115299-2-chris.obbard@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit 3a786086c6f8 ("arm64: dts: qcom: Add missing "-thermal"
suffix for thermal zones") renamed the thermal zone in the pm8150l.dtsi
file to comply with the schema. However this resulted in a clash with
the RB5 board file, which already contained the pm8150l-thermal zone for
the on-board sensor. This resulted in the board file definition
overriding the thermal zone defined in the PMIC include file (and thus
the on-die PMIC temp alarm was not probing at all).
Rename the thermal zone in qcom/qrb5165-rb5.dts to remove this override.
The am335x devices started producing boot errors for resetting musb module
in because of subtle timing changes:
Unhandled fault: external abort on non-linefetch (0x1008)
...
sysc_poll_reset_sysconfig from sysc_reset+0x109/0x12
sysc_reset from sysc_probe+0xa99/0xeb0
...
The fix is to flush posted write after enable before reset during
probe. Note that some devices also need to specify the delay after enable
with ti,sysc-delay-us, but this is not needed for musb on am335x based on
my tests.
Reported-by: kernelci.org bot <bot@kernelci.org> Closes: https://storage.kernelci.org/next/master/next-20230614/arm/multi_v7_defconfig+CONFIG_THUMB2_KERNEL=y/gcc-10/lab-cip/baseline-beaglebone-black.html Fixes: 596e7955692b ("bus: ti-sysc: Add support for software reset") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
While performing certain power-off sequences, PCI drivers are
called to suspend and resume their underlying devices through
PCI PM (power management) interface. However this NIC hardware
does not support PCI PM suspend/resume operations so system wide
suspend/resume leads to bad MFW (management firmware) state which
causes various follow-up errors in driver when communicating with
the device/firmware afterwards.
To fix this driver implements PCI PM suspend handler to indicate
unsupported operation to the PCI subsystem explicitly, thus avoiding
system to go into suspended/standby mode.
Without this fix device/firmware does not recover unless system
is power cycled.
Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Xin Long <lucien.xin@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Link: https://lore.kernel.org/r/20230816142158.1779798-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
So the conditions of leaving global pressure are inconstant, which
may lead to the situation that one pressured net-memcg prevents the
global pressure from being cleared when there is indeed no global
pressure, thus the global constrains are still in effect unexpectedly
on the other sockets.
This patch fixes this by ignoring the net-memcg's pressure when
deciding whether should leave global memory pressure.
Existing comment in the source explains why we don't want efx_init_tc()
failure to be fatal. Cited commit erroneously consolidated failure
paths causing the probe to be failed in this case.
In efx_init_tc(), move the setting of efx->tc->up after the
flow_indr_dev_register() call, so that if it fails, efx_fini_tc()
won't call flow_indr_dev_unregister().
Fixes: 5b2e12d51bd8 ("sfc: bind indirect blocks for TC offload on EF100") Suggested-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/a81284d7013aba74005277bd81104e4cfbea3f6f.1692114888.git.ecree.xilinx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When offloading a TC encap action, the action information for the
hardware might not be "ready": if there's currently no neighbour entry
available for the destination address, we can't construct the Ethernet
header to prepend to the packet. In this case, we still offload the
flow rule, but with its action-set-list ID pointing at a "fallback"
action which simply delivers the packet to its default destination (as
though no flow rule had matched), thus allowing software TC to handle
it. Later, when we receive a neighbouring update that allows us to
construct the encap header, the rule will become "ready" and we will
update its action-set-list ID in hardware to point at the actual
offloaded actions.
This patch sets up these fallback ASLs, but does not yet use them.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: fa165e194997 ("sfc: don't unregister flow_indr if it was never registered") Signed-off-by: Sasha Levin <sashal@kernel.org>
If the switch is reset during active EEPROM transactions, as in
just after an SoC reset after power up, the I2C bus transaction
may be cut short leaving the EEPROM internal I2C state machine
in the wrong state. When the switch is reset again, the bad
state machine state may result in data being read from the wrong
memory location causing the switch to enter unexpected mode
rendering it inoperational.
Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset") Signed-off-by: Alfred Lee <l00g33k@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
We can't simply free the connector after calling drm_connector_init on it.
We need to clean up the drm side first.
It might not fix all regressions from commit 2b5d1c29f6c4
("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"),
but at least it fixes a memory corruption in error handling related to
that commit.
Before this fix, running high rate traffic through XDP_REDIRECT
with multibuf could overrun the fifo used to release the
xdp frames after tx completion. This resulted in corrupted data
being consumed on the free side.
The culplirt was a miscalculation of the fifo size: the maximum ratio
between fifo entries / data segments was incorrect. This ratio serves to
calculate the max fifo size for a full sq where each packet uses the
worst case number of entries in the fifo.
This patch fixes the formula and names the constant. It also makes sure
that future values will use a power of 2 number of entries for the fifo
mask to work.
Return an error if a field's mask is neither full nor empty. When a mask
is only partial the field is not being used for rule programming but it
gives a wrong impression it is used. Fix by returning an error on any
partial mask to make it clear they are not supported.
The ip_ver assignment is moved earlier in code to allow using it in
iavf_validate_fdir_fltr_masks.
Fixes: 527691bf0682 ("iavf: Support IPv4 Flow Director filters") Fixes: e90cbc257a6f ("iavf: Support IPv6 Flow Director filters") Signed-off-by: Piotr Gardocki <piotrx.gardocki@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Recent changes in net-next (commit 759ab1edb56c ("net: store netdevs
in an xarray")) refactored the handling of pre-assigned ifindexes
and let syzbot surface a latent problem in ovs. ovs does not validate
ifindex, making it possible to create netdev ports with negative
ifindex values. It's easy to repro with YNL:
$ ip link show
-65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff
...
Validate the inputs. Now the second command correctly returns:
Similar to commit 01f4fd270870 ("bonding: Fix incorrect deletion of
ETH_P_8021AD protocol vid from slaves"), we can trigger BUG_ON(!vlan_info)
in unregister_vlan_dev() with the following testcase:
# ip netns add ns1
# ip netns exec ns1 ip link add team1 type team
# ip netns exec ns1 ip link add team_slave type veth peer veth2
# ip netns exec ns1 ip link set team_slave master team1
# ip netns exec ns1 ip link add link team_slave name team_slave.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link add link team1 name team1.10 type vlan id 10 protocol 802.1ad
# ip netns exec ns1 ip link set team_slave nomaster
# ip netns del ns1
Add S-VLAN tag related features support to team driver. So the team driver
will always propagate the VLAN info to its slaves.
Fixes: 8ad227ff89a7 ("net: vlan: add 802.1ad support") Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230814032301.2804971-1-william.xuanziyang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 54810 does not support c45. The mmd_phy_indirect accesses return
arbirtary values leading to odd behavior like saying it supports EEE
when it doesn't. We also see that reading/writing these non-existent
MMD registers leads to phy instability in some cases.
Netlink event path is missing a synchronization point with GC
transactions. Add GC sequence number update to netns release path and
netlink event path, any GC transaction losing race will be discarded.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and
SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout
value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300
msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state.
As Paolo Valerio noticed, this might cause unwanted expiration of the ct
entry. In my test, with 1s tc netem delay set on the NAT path, after the
SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND
state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is
sent back from the peer, the sctp ct entry has expired and been deleted,
and then the SHUTDOWN_ACK has to be dropped.
Also, it is confusing these two sysctl options always show 0 due to all
timeout values using sec as unit:
This patch fixes it by also using 3 secs for sctp shutdown send and recv
state in sctp conntrack, which is also RTO.initial value in SCTP protocol.
Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV
was probably used for a rare scenario where SHUTDOWN is sent on 1st path
but SHUTDOWN_ACK is replied on 2nd path, then a new connection started
immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV
to CLOSE when receiving INIT in the ORIGINAL direction.
Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Reported-by: Paolo Valerio <pvalerio@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Insertion must ignore duplicate but expired entries.
Moreover, there is a strange asymmetry in nft_pipapo_activate:
It refetches the current element, whereas the other ->activate callbacks
(bitmap, hash, rhash, rbtree) use elem->priv.
Same for .remove: other set implementations take elem->priv,
nft_pipapo_remove fetches elem->priv, then does a relookup,
remove this.
I suspect this was the reason for the change that prompted the
removal of the expired check in pipapo_get() in the first place,
but skipping exired elements there makes no sense to me, this helper
is used for normal get requests, insertions (duplicate check)
and deactivate callback.
In first two cases expired elements must be skipped.
For ->deactivate(), this gets called for DELSETELEM, so it
seems to me that expired elements should be skipped as well, i.e.
delete request should fail with -ENOENT error.
Fixes: 24138933b97b ("netfilter: nf_tables: don't skip expired elements during walk") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
The encode_dma() function has some validation on in_trans->size but it
would be more clear to move those checks to find_and_map_user_pages().
The encode_dma() had two checks:
if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size)
return -EINVAL;
The in_trans->addr variable is the starting address. The in_trans->size
variable is the total size of the transfer. The transfer can occur in
parts and the resources->xferred_dma_size tracks how many bytes we have
already transferred.
This patch introduces a new variable "remaining" which represents the
amount we want to transfer (in_trans->size) minus the amount we have
already transferred (resources->xferred_dma_size).
I have modified the check for if in_trans->size is zero to instead check
if in_trans->size is less than resources->xferred_dma_size. If we have
already transferred more bytes than in_trans->size then there are negative
bytes remaining which doesn't make sense. If there are zero bytes
remaining to be copied, just return success.
The check in encode_dma() checked that "addr + size" could not overflow
and barring a driver bug that should work, but it's easier to check if
we do this in parts. First check that "in_trans->addr +
resources->xferred_dma_size" is safe. Then check that "xfer_start_addr +
remaining" is safe.
My final concern was that we are dealing with u64 values but on 32bit
systems the kmalloc() function will truncate the sizes to 32 bits. So
I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);"
and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit
systems.
Fixes: 129776ac2e38 ("accel/qaic: Add control path") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/24d3348b-25ac-4c1b-b171-9dae7c43e4e0@moroto.mountain Signed-off-by: Sasha Levin <sashal@kernel.org>
The failure handling procedure destroys page pools for all queues,
including those that haven't had their page pool created yet. this patch
introduces necessary adjustments to prevent potential risks and
inconsistency with the error handling behavior.
If it fails to get the devices's MAC address, octep_probe exits while
leaving the delayed work intr_poll_task queued. When the work later
runs, it's a use after free.
Move the cancelation of intr_poll_task from octep_remove into
octep_device_cleanup. This does not change anything in the octep_remove
flow, but octep_device_cleanup is called also in the octep_probe error
path, where the cancelation is needed.
Note that the cancelation of ctrl_mbox_task has to follow
intr_poll_task's, because the ctrl_mbox_task may be queued by
intr_poll_task.
Fixes: 24d4333233b3 ("octeon_ep: poll for control messages") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-5-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
tx_timeout_task is canceled too early when removing the driver. Nothing
prevents .ndo_tx_timeout from triggering and queuing the work again.
Better cancel it after the netdev is unregistered.
It's harmless for octep_tx_timeout_task to run in the window between the
unregistration and cancelation, because it checks netif_running.
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Link: https://lore.kernel.org/r/20230810150114.107765-3-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The intention was to wait up to 500 ms for the mbox response.
The third argument to wait_event_interruptible_timeout() is supposed to
be the timeout duration. The driver mistakenly passed absolute time
instead.
Fixes: 577f0d1b1c5f ("octeon_ep: add separate mailbox command and response queues") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230810150114.107765-2-mschmidt@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On Zynq UltraScale+ MPSoC ubuntu platform when systemctl issues suspend,
network manager bring down the interface and goes into suspend. When it
wakes up it again enables the interface.
This leads to xilinx-psgtr "PLL lock timeout" on interface bringup, as
the power management controller power down the entire FPD (including
SERDES) if none of the FPD devices are in use and serdes is not
initialized on resume.
$ sudo rtcwake -m no -s 120 -v
$ sudo systemctl suspend <this does ifconfig eth1 down>
$ ifconfig eth1 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110
macb driver is called in this way:
1. macb_close: Stop network interface. In this function, it
reset MACB IP and disables PHY and network interface.
2. macb_suspend: It is called in kernel suspend flow. But because
network interface has been disabled(netif_running(ndev) is
false), it does nothing and returns directly;
3. System goes into suspend state. Some time later, system is
waken up by RTC wakeup device;
4. macb_resume: It does nothing because network interface has
been disabled;
5. macb_open: It is called to enable network interface again. ethernet
interface is initialized in this API but serdes which is power-off
by PMUFW during FPD-off suspend is not initialized again and so
we hit GT PLL lock issue on open.
To resolve this PLL timeout issue always do PS GTR initialization
when ethernet device is configured as non-wakeup source.
projects / thirdparty / kernel / stable.git / log
