xfstests generic/730 test failed because after deleting the device
that still had dirty data, the file could still be read without
returning an error. The reason is the missing shutdown check in
->read_iter.
I also noticed that shutdown checks were missing from ->write_iter,
->splice_read, and ->mmap. This commit adds shutdown checks to all
of them.
Fixes: f761fcdd289d ("exfat: Implement sops->shutdown and ioctl") Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com> Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In exfat_find_last_cluster(), the cluster chain is traversed until
the EOF cluster. If the cluster chain includes a loop due to file
system corruption, the EOF cluster cannot be traversed, resulting
in an infinite loop.
If the number of clusters indicated by the file size is inconsistent
with the cluster chain length, exfat_find_last_cluster() will return
an error, so if this inconsistency is found, the traversal can be
aborted without traversing to the EOF cluster.
Commit ef7134c7fc48 ("smb: client: Fix use-after-free of network
namespace.") attempted to fix a netns use-after-free issue by manually
adjusting reference counts via sk->sk_net_refcnt and sock_inuse_add().
However, a later commit e9f2517a3e18 ("smb: client: fix TCP timers deadlock
after rmmod") pointed out that the approach of manually setting
sk->sk_net_refcnt in the first commit was technically incorrect, as
sk->sk_net_refcnt should only be set for user sockets. It led to issues
like TCP timers not being cleared properly on close. The second commit
moved to a model of just holding an extra netns reference for
server->ssocket using get_net(), and dropping it when the server is torn
down.
But there remain some gaps in the get_net()/put_net() balancing added by
these commits. The incomplete reference handling in these fixes results
in two issues:
1. Netns refcount leaks[1]
The problem process is as follows:
```
mount.cifs cifsd
cifs_do_mount
cifs_mount
cifs_mount_get_session
cifs_get_tcp_session
get_net() /* First get net. */
ip_connect
generic_ip_connect /* Try port 445 */
get_net()
->connect() /* Failed */
put_net()
generic_ip_connect /* Try port 139 */
get_net() /* Missing matching put_net() for this get_net().*/
cifs_get_smb_ses
cifs_negotiate_protocol
smb2_negotiate
SMB2_negotiate
cifs_send_recv
wait_for_response
cifs_demultiplex_thread
cifs_read_from_socket
cifs_readv_from_socket
cifs_reconnect
cifs_abort_connection
sock_release();
server->ssocket = NULL;
/* Missing put_net() here. */
generic_ip_connect
get_net()
->connect() /* Failed */
put_net()
sock_release();
server->ssocket = NULL;
free_rsp_buf
...
clean_demultiplex_info
/* It's only called once here. */
put_net()
```
When cifs_reconnect() is triggered, the server->ssocket is released
without a corresponding put_net() for the reference acquired in
generic_ip_connect() before. it ends up calling generic_ip_connect()
again to retry get_net(). After that, server->ssocket is set to NULL
in the error path of generic_ip_connect(), and the net count cannot be
released in the final clean_demultiplex_info() function.
2. Potential use-after-free
The current refcounting scheme can lead to a potential use-after-free issue
in the following scenario:
```
cifs_do_mount
cifs_mount
cifs_mount_get_session
cifs_get_tcp_session
get_net() /* First get net */
ip_connect
generic_ip_connect
get_net()
bind_socket
kernel_bind /* failed */
put_net()
/* after out_err_crypto_release label */
put_net()
/* after out_err label */
put_net()
```
In the exception handling process where binding the socket fails, the
get_net() and put_net() calls are unbalanced, which may cause the
server->net reference count to drop to zero and be prematurely released.
To address both issues, this patch ties the netns reference counting to
the server->ssocket and server lifecycles. The extra reference is now
acquired when the server or socket is created, and released when the
socket is destroyed or the server is torn down.
The csts_state_names[] array only has six sparse entries, but the
iteration code in nvmet_ctrl_state_show() iterates seven, resulting in a
potential out-of-bounds stack read. Fix that.
Fixes the following warning with an UBSAN kernel:
vmlinux.o: warning: objtool: .text.nvmet_ctrl_state_show: unexpected end of section
The previous change to support cgroup filters introduced a bug that
pathname can include commas. It confused the lexer to treat an item and
the trailing comma as a single token. And it resulted in a parse error:
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--filter <filter>
event filter
It should get "0" and "," separately.
An easiest fix would be to remove "," from the possible pathname
characters. As it's for cgroup names, probably ok to assume it won't
have commas in the pathname.
I found that the existing BPF filtering test didn't have any complex
filter condition with commas. Let's update the group filter test which
is supposed to test filter combinations like this.
Link: https://lore.kernel.org/r/20250307220922.434319-1-namhyung@kernel.org Fixes: 91e88437d5156b20 ("perf bpf-filter: Support filtering on cgroups") Reported-by: Sally Shi <sshii@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
proc_pid_wchan() used to report kernel addresses to user space but that is
no longer the case today. Bring the comment above proc_pid_wchan() in
sync with the implementation.
Link: https://lkml.kernel.org/r/20250319210222.1518771-1-bvanassche@acm.org Fixes: b2f73922d119 ("fs/proc, core/debug: Don't expose absolute kernel addresses via wchan") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Kees Cook <kees@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
tty_write_room() returns an "unsigned int". So in case some insane
driver (like my tty test driver) returns (legitimate) UINT_MAX from its
tty_operations::write_room(), n_tty is confused on several places.
For example, in process_output_block(), the result of tty_write_room()
is stored into (signed) "int". So this UINT_MAX suddenly becomes -1. And
that is extended to ssize_t and returned from process_output_block().
This causes a write() to such a node to receive -EPERM (which is -1).
Fix that by using proper "unsigned int" and proper "== 0" test. And
return 0 constant directly in that "if", so that it is immediately clear
what is returned ("space" equals to 0 at that point).
Similarly for process_output() and __process_echoes().
Note this does not fix any in-tree driver as of now.
If you want "Fixes: something", it would be commit 03b3b1a2405c ("tty:
make tty_operations::write_room return uint"). I intentionally do not
mark this patch by a real tag below.
In case vchiq_platform_conn_state_changed() is never called or fails before
driver removal, ka_thread won't be a valid pointer to a task_struct. So
do the necessary checks before calling kthread_stop to avoid a crash.
The commit 2a4d15a4ae98 ("staging: vchiq: Refactor vchiq cdev code")
moved the debugfs directory creation before vchiq character device
registration. In case the latter fails, the debugfs directory won't
be cleaned up.
This fixes the following issue:
ERROR: modpost: "aes_expandkey" [drivers/staging/rtl8723bs/r8723bs.ko]
undefined!
ERROR: modpost: "aes_encrypt" [drivers/staging/rtl8723bs/r8723bs.ko]
undefined!
Fixes: 7d40753d8820 ("staging: rtl8723bs: use in-kernel aes encryption in OMAC1 routines") Fixes: 3d3a170f6d80 ("staging: rtl8723bs: use in-kernel aes encryption") Signed-off-by: 谢致邦 (XIE Zhibang) <Yeking@Red54.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/tencent_0BDDF3A721708D16A2E7C3DAFF0FEC79A105@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
zfree() requires an address otherwise it frees what's in name, rather
than name itself. Pass the address of name to fix it.
This was the only incorrect occurrence in Perf found using a search.
Fixes: 8db5cabcf1b6 ("perf stat: Fork and launch 'perf record' when 'perf stat' needs to get retire latency value for a metric.") Signed-off-by: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250319101614.190922-1-james.clark@linaro.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Kernel modules for which we cannot find a file on-disk will have a
dso->long_name that looks like "[module_name]". Prior to the commit
listed in the fixes, the dso->kernel field would be zero (for user
space), so dso__is_kallsyms() would return false. After the commit,
kernel module DSOs are correctly labeled, but the result is that
dso__is_kallsyms() erroneously returns true for those modules without a
filesystem path.
Later, build_id_cache__add() consults this value of is_kallsyms, and
when true, it copies /proc/kallsyms into the cache. Users with many
kernel modules without a filesystem path (e.g. ksplice or possibly
kernel live patch modules) have reported excessive disk space usage in
the build ID cache directory due to this behavior.
To reproduce the issue, it's enough to build a trivial out-of-tree hello
world kernel module, load it using insmod, and then use:
perf record -ag -- sleep 1
In the build ID directory, there will be a directory for your module
name containing a kallsyms file.
Fix this up by changing dso__is_kallsyms() to consult the
dso_binary_type enumeration, which is also symmetric to the above checks
for dso__is_vmlinux() and dso__is_kcore(). With this change, kallsyms is
not cached in the build-id cache for out-of-tree modules.
The pyrf_event__new() method copies the event obtained from the perf
ring buffer to a structure that will then be turned into a python object
for further consumption, so it copies perf_event.header.size bytes to
its 'event' member:
When processing tracepoints the perf python binding was parsing the
event before calling perf_mmap__consume(&md->core) in
pyrf_evlist__read_on_cpu().
But part of this event parsing was to set the perf_sample->raw_data
pointer to the payload of the event, which then could be overwritten by
other event before tracepoint fields were asked for via event.prev_comm
in a python program, for instance.
This also happened with other fields, but strings were were problems
were surfacing, as there is UTF-8 validation for the potentially garbled
data.
This ended up showing up as (with some added debugging messages):
( field 'prev_comm' ret=0x7f7c31f65110, raw_size=68 ) ( field 'prev_pid' ret=0x7f7c23b1bed0, raw_size=68 ) ( field 'prev_prio' ret=0x7f7c239c0030, raw_size=68 ) ( field 'prev_state' ret=0x7f7c239c0250, raw_size=68 ) time 14771421785867 prev_comm= prev_pid=1919907691 prev_prio=796026219 prev_state=0x303a32313175 ==>
( XXX '��' len=16, raw_size=68) ( field 'next_comm' ret=(nil), raw_size=68 ) Traceback (most recent call last):
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 51, in <module>
main()
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 46, in main
event.next_comm,
^^^^^^^^^^^^^^^
AttributeError: 'perf.sample_event' object has no attribute 'next_comm'
When event.next_comm was asked for, the PyUnicode_FromString() python
API would fail and that tracepoint field wouldn't be available, stopping
the tools/perf/python/tracepoint.py test tool.
But, since we already do a copy of the whole event in pyrf_event__new,
just use it and while at it remove what was done in in e8968e654191390a
("perf python: Fix pyrf_evlist__read_on_cpu event consuming") because we
don't really need to wait for parsing the sample before declaring the
event as consumed.
This copy is questionable as is now, as it limits the maximum event +
sample_type and tracepoint payload to sizeof(union perf_event), this all
has been "working" because 'struct perf_event_mmap2', the largest entry
in 'union perf_event' is:
To avoid a leak if we have the python object but then something happens
and we need to return the operation, decrement the offset of the newly
created object.
Fixes: 377f698db12150a1 ("perf python: Add struct evsel into struct pyrf_event") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250312203141.285263-5-acme@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The code does not add IBI rules for devices with controller capability.
However, the secondary controller has the controller capability and works
at target mode when the device is probed. Therefore, add IBI rules for
such devices.
Fixes: dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver") Signed-off-by: Stanley Chu <yschu@nuvoton.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250318053606.3087121-2-yschu@nuvoton.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some file systems (e.g. ext4) may reuse inode numbers once the inode is
not in use anymore. Usually hostfs will keep an FD open for each inode,
but this is not always the case. In the case of sockets, this cannot
even be done properly.
As such, the following sequence of events was possible:
* application creates and deletes a socket
* hostfs creates/deletes the socket on the host
* inode is still in the hostfs cache
* hostfs creates a new file
* ext4 on the outside reuses the inode number
* hostfs finds the socket inode for the newly created file
* application receives -ENXIO when opening the file
As mentioned, this can only happen if the deleted file is a special file
that is never opened on the host (i.e. no .open fop).
As such, to prevent issues, it is sufficient to check that the inode
has the expected type. That said, also add a check for the inode birth
time, just to be on the safe side.
There is no need to override the default version of this function
anymore as UML now has proper _nofault memory access functions.
Doing this also fixes the fact that the implementation was incorrect as
using mincore() will incorrectly flag pages as inaccessible if they were
swapped out by the host.
In order to work around some issues with disabling SSE on older versions
of gcc (compilation would fail upon seeing a function declaration
containing a float, even if it was never called or defined), the
corresponding CFLAGS and RUSTFLAGS were only set when using clang.
However, this led to two problems:
- Newer gcc versions also wouldn't get the correct flags, despite not
having the bug.
- The RUSTFLAGS for setting the rust target definition were not set,
despite being unrelated. This works by chance for x86_64, as the
built-in default target is close enough, but not for 32-bit x86.
Move the target definition outside the conditional block, and update the
condition to take into account the gcc version.
Fixes: a3046a618a28 ("um: Only disable SSE on clang to work around old GCC bugs") Signed-off-by: David Gow <davidgow@google.com> Link: https://patch.msgid.link/20250210105353.2238769-2-davidgow@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Patch series "fs/dax: Fix ZONE_DEVICE page reference counts", v9.
Device and FS DAX pages have always maintained their own page reference
counts without following the normal rules for page reference counting. In
particular pages are considered free when the refcount hits one rather
than zero and refcounts are not added when mapping the page.
Tracking this requires special PTE bits (PTE_DEVMAP) and a secondary
mechanism for allowing GUP to hold references on the page (see
get_dev_pagemap). However there doesn't seem to be any reason why FS DAX
pages need their own reference counting scheme.
By treating the refcounts on these pages the same way as normal pages we
can remove a lot of special checks. In particular pXd_trans_huge()
becomes the same as pXd_leaf(), although I haven't made that change here.
It also frees up a valuable SW define PTE bit on architectures that have
devmap PTE bits defined.
It also almost certainly allows further clean-up of the devmap managed
functions, but I have left that as a future improvment. It also enables
support for compound ZONE_DEVICE pages which is one of my primary
motivators for doing this work.
This patch (of 20):
FS DAX requires file systems to call into the DAX layout prior to
unlinking inodes to ensure there is no ongoing DMA or other remote access
to the direct mapped page. The fuse file system implements
fuse_dax_break_layouts() to do this which includes a comment indicating
that passing dmap_end == 0 leads to unmapping of the whole file.
However this is not true - passing dmap_end == 0 will not unmap anything
before dmap_start, and further more dax_layout_busy_page_range() will not
scan any of the range to see if there maybe ongoing DMA access to the
range. Fix this by passing -1 for dmap_end to fuse_dax_break_layouts()
which will invalidate the entire file range to
dax_layout_busy_page_range().
Link: https://lkml.kernel.org/r/cover.8068ad144a7eea4a813670301f4d2a86a8e68ec4.1740713401.git-series.apopple@nvidia.com Link: https://lkml.kernel.org/r/f09a34b6c40032022e4ddee6fadb7cc676f08867.1740713401.git-series.apopple@nvidia.com Fixes: 6ae330cad6ef ("virtiofs: serialize truncate/punch_hole and dax fault path") Signed-off-by: Alistair Popple <apopple@nvidia.com> Co-developed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Balbir Singh <balbirs@nvidia.com> Tested-by: Alison Schofield <alison.schofield@intel.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Asahi Lina <lina@asahilina.net> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: linmiaohe <linmiaohe@huawei.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Matthew Wilcow (Oracle) <willy@infradead.org> Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A recent change increased the size of an NFSv4 open owner, but didn't
increase the corresponding max_sz defines. This is not know to have
caused failure, but should be fixed.
This patch also fixes some relates _maxsz fields that are wrong.
Note that the XXX_owner_id_maxsz values now are only the size of the id
and do NOT include the len field that will always preceed the id in xdr
encoding. I think this is clearer.
The amount of looping through the list of delegations is occasionally
leading to soft lockups. If the state manager was asked to manage the
delayed return of delegations, then only scan those filesystems
containing delegations that were marked as being delayed.
Fixes: be20037725d1 ("NFSv4: Fix delegation return in cases where we have to retry") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The amount of looping through the list of delegations is occasionally
leading to soft lockups. If the state manager was asked to reap the
expired delegations, it should scan only those filesystems that hold
delegations that need to be reaped.
The amount of looping through the list of delegations is occasionally
leading to soft lockups. If the state manager was asked to return
delegations asynchronously, it should only scan those filesystems that
hold delegations that need to be returned.
The amount of looping through the list of delegations is occasionally
leading to soft lockups. Avoid at least some loops by not requiring the
NFSv4 state manager to scan for delegations that are marked for
return-on-close. Instead, either mark them for immediate return (if
possible) or else leave it up to nfs4_inode_return_delegation_on_close()
to return them once the file is closed by the application.
Fixes: b757144fd77c ("NFSv4: Be less aggressive about returning delegations for open files") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Patch series "powerpc/crash: use generic crashkernel reservation", v3.
Commit 0ab97169aa05 ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Additionally move powerpc to use generic APIs to locate memory hole for
kexec segments while loading kdump kernel.
This patch (of 7):
kexec_elf_load() loads an ELF executable and sets the address of the
lowest PT_LOAD section to the address held by the lowest_load_addr
function argument.
To determine the lowest PT_LOAD address, a local variable lowest_addr
(type unsigned long) is initialized to UINT_MAX. After loading each
PT_LOAD, its address is compared to lowest_addr. If a loaded PT_LOAD
address is lower, lowest_addr is updated. However, setting lowest_addr to
UINT_MAX won't work when the kernel image is loaded above 4G, as the
returned lowest PT_LOAD address would be invalid. This is resolved by
initializing lowest_addr to ULONG_MAX instead.
This issue was discovered while implementing crashkernel high/low
reservation on the PowerPC architecture.
Link: https://lkml.kernel.org/r/20250131113830.925179-1-sourabhjain@linux.ibm.com Link: https://lkml.kernel.org/r/20250131113830.925179-2-sourabhjain@linux.ibm.com Fixes: a0458284f062 ("powerpc: Add support code for kexec_file_load()") Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Acked-by: Baoquan He <bhe@redhat.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ever since commit b756a3b5e7ea ("mm: device exclusive memory access") we
can return with a device-exclusive entry from page_vma_mapped_walk().
__replace_page() is not prepared for that, so teach it about these PFN
swap PTEs. Note that device-private entries are so far not applicable on
that path, because GUP would never have returned such folios (conversion
to device-private happens by page migration, not in-place conversion of
the PTE).
There is a race between GUP and us locking the folio to look it up using
page_vma_mapped_walk(), so this is likely a fix (unless something else
could prevent that race, but it doesn't look like). pte_pfn() on
something that is not a present pte could give use garbage, and we'd
wrongly mess up the mapcount because it was already adjusted by calling
folio_remove_rmap_pte() when making the entry device-exclusive.
Link: https://lkml.kernel.org/r/20250210193801.781278-9-david@redhat.com Fixes: b756a3b5e7ea ("mm: device exclusive memory access") Signed-off-by: David Hildenbrand <david@redhat.com> Tested-by: Alistair Popple <apopple@nvidia.com> Cc: Alex Shi <alexs@kernel.org> Cc: Danilo Krummrich <dakr@kernel.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Jann Horn <jannh@google.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Karol Herbst <kherbst@redhat.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Lyude <lyude@redhat.com> Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: SeongJae Park <sj@kernel.org> Cc: Simona Vetter <simona.vetter@ffwll.ch> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yanteng Si <si.yanteng@linux.dev> Cc: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
No need to specify the array size, let the compiler figure that out.
This addresses this compiler warning that was noticed while build
testing on fedora rawhide:
31 15.81 fedora:rawhide : FAIL gcc version 15.0.1 20250225 (Red Hat 15.0.1-0) (GCC)
util/units.c: In function 'unit_number__scnprintf':
util/units.c:67:24: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-initialization]
67 | char unit[4] = "BKMG";
| ^~~~~~
cc1: all warnings being treated as errors
Over various refactorings evlist__create_syswide_maps has been made to
only ever return with -ENOMEM. Fix this so that when
perf_evlist__set_maps is successfully called, 0 is returned.
Reviewed-by: Howard Chu <howardchu95@gmail.com> Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20250228222308.626803-3-irogers@google.com Fixes: 8c0498b6891d7ca5 ("perf evlist: Fix create_syswide_maps() not propagating maps") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In debug_file, pr_warning_once is called on error. As that function
calls debug_file the function will yield a stack overflow. Switch the
location of the call so the recursion is avoided.
Reviewed-by: Howard Chu <howardchu95@gmail.com> Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20250228222308.626803-2-irogers@google.com Fixes: ec49230cf6dda704 ("perf debug: Expose debug file") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The array contains only 5 elements, but the index calculated by
veml6075_read_int_time_index can range from 0 to 7,
which could lead to out-of-bounds access. The check prevents this issue.
Coverity Issue
CID 1574309: (#1 of 1): Out-of-bounds read (OVERRUN)
overrun-local: Overrunning array veml6075_it_ms of 5 4-byte
elements at element index 7 (byte offset 31) using
index int_index (which evaluates to 7)
This is hardening against potentially broken hardware. Good to have
but not necessary to backport.
Fixes: 3b82f43238ae ("iio: light: add VEML6075 UVA and UVB light sensor driver") Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/Z7dnrEpKQdRZ2qFU@Emma Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Datasheet recommends Setting the MOSI idle state to high in order to
prevent accidental reset of the device when SCLK is free running.
This happens when the controller clocks out a 1 followed by 63 zeros
while the CS is held low.
Check if SPI controller supports SPI_MOSI_IDLE_HIGH flag and set it.
Checking the binary representation of two structs (of the same type)
for equality doesn't have the same semantic as comparing all members for
equality. The former might find a difference where the latter doesn't in
the presence of padding or when ambiguous types like float or bool are
involved. (Floats typically have different representations for single
values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has
at least 8 bits and the raw values 1 and 2 (probably) both evaluate to
true, but memcmp finds a difference.)
When searching for a channel that already has the configuration we need,
the comparison by member is the one that is needed.
Convert the comparison accordingly to compare the members one after
another. Also add a static_assert guard to (somewhat) ensure that when
struct ad7173_channel_config::config_props is expanded, the comparison
is adapted, too.
This issue is somewhat theoretic, but using memcmp() on a struct is a
bad pattern that is worth fixing.
Checking the binary representation of two structs (of the same type)
for equality doesn't have the same semantic as comparing all members for
equality. The former might find a difference where the latter doesn't in
the presence of padding or when ambiguous types like float or bool are
involved. (Floats typically have different representations for single
values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has
at least 8 bits and the raw values 1 and 2 (probably) both evaluate to
true, but memcmp finds a difference.)
When searching for a channel that already has the configuration we need,
the comparison by member is the one that is needed.
Convert the comparison accordingly to compare the members one after
another. Also add a static_assert guard to (somewhat) ensure that when
struct ad7124_channel_config::config_props is expanded, the comparison
is adapted, too.
This issue is somewhat theoretic, but using memcmp() on a struct is a
bad pattern that is worth fixing.
Fixes: 7b8d045e497a ("iio: adc: ad7124: allow more than 8 channels") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20250303114659.1672695-13-u.kleine-koenig@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Checking the binary representation of two structs (of the same type)
for equality doesn't have the same semantic as comparing all members for
equality. The former might find a difference where the latter doesn't in
the presence of padding or when ambiguous types like float or bool are
involved. (Floats typically have different representations for single
values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has
at least 8 bits and the raw values 1 and 2 (probably) both evaluate to
true, but memcmp finds a difference.)
When searching for a channel that already has the configuration we need,
the comparison by member is the one that is needed.
Convert the comparison accordingly to compare the members one after
another. Also add a static_assert guard to (somewhat) ensure that when
struct ad4130_setup_info is expanded, the comparison is adapted, too.
This issue is somewhat theoretic, but using memcmp() on a struct is a
bad pattern that is worth fixing.
Add fsl_edma->txirq/errirq check to avoid below warning because no
errirq at i.MX9 platform. Otherwise there will be kernel dump:
WARNING: CPU: 0 PID: 11 at kernel/irq/devres.c:144 devm_free_irq+0x74/0x80
Modules linked in:
CPU: 0 UID: 0 PID: 11 Comm: kworker/u8:0 Not tainted 6.12.0-rc7#18
Hardware name: NXP i.MX93 11X11 EVK board (DT)
Workqueue: events_unbound deferred_probe_work_func
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : devm_free_irq+0x74/0x80
lr : devm_free_irq+0x48/0x80
Call trace:
devm_free_irq+0x74/0x80 (P)
devm_free_irq+0x48/0x80 (L)
fsl_edma_remove+0xc4/0xc8
platform_remove+0x28/0x44
device_remove+0x4c/0x80
Fixes: 44eb827264de ("dmaengine: fsl-edma: request per-channel IRQ only when channel is allocated") Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20250228071720.3780479-2-peng.fan@oss.nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is kernel dump when do module test:
sysfs: cannot create duplicate filename
/devices/platform/soc@0/44000000.bus/44000000.dma-controller/dma/dma0chan0
__dma_async_device_channel_register+0x128/0x19c
dma_async_device_register+0x150/0x454
fsl_edma_probe+0x6cc/0x8a0
platform_probe+0x68/0xc8
fsl_edma_cleanup_vchan will unlink vchan.chan.device_node, while
dma_async_device_unregister needs the link to do
__dma_async_device_channel_unregister. So need move fsl_edma_cleanup_vchan
after dma_async_device_unregister to make sure channel could be freed.
So clean up chan after dma_async_device_unregister to address this.
Fixes: 6f93b93b2a1b ("dmaengine: fsl-edma: kill the tasklets upon exit") Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/20250228071720.3780479-1-peng.fan@oss.nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The "de_off" and "used" variables come from the disk so they both need to
check. The problem is that on 32bit systems if they're both greater than
UINT_MAX - 16 then the check does work as intended because of an integer
overflow.
Fixes: 60ce8dfde035 ("fs/ntfs3: Fix wrong if in hdr_first_de") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On 32bit systems the "off + sizeof(struct NTFS_DE)" addition can
have an integer wrapping issue. Fix it by using size_add().
Fixes: 82cae269cfa9 ("fs/ntfs3: Add initialization of super block") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ffs() function returns the index of the first set bit, starting from 1.
If no bits are set, it returns zero. This behavior causes an off-by-one
page size in the debug message, as the page size calculation [1]
is zero-based, while ffs() is one-based.
Fix this by subtracting one from the result of ffs(). Note that since
variable 'val' is unsigned, subtracting one from zero will result in the
maximum unsigned integer value. Consequently, the condition 'if (val < 16)'
will still function correctly.
[1], Page size: (2^(n+12)), where 'n' is the set page size bit.
Command 'perf bench syscall fork -l 100000' offers option -l to run for
a specified number of iterations. However this option is not always
observed. The number is silently limited to 10000 iterations as can be
seen:
The ARM_SPE_OP_LD and ARM_SPE_OP_ST operations are secondary operation
type, they are overlapping with other second level's operation types
belonging to SVE and branch operations. As a result, a non load-store
operation can be parsed for data source and memory sample.
To fix the issue, this commit introduces a is_ldst_op() macro for
checking LDST operation, and apply the checking when synthesize data
source and memory samples.
Fixes: a89dbc9b988f ("perf arm-spe: Set sample's data source field") Signed-off-by: Leo Yan <leo.yan@arm.com> Reviewed-by: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250304111240.3378214-7-leo.yan@arm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Make sure to NULL terminate the buffer in
iio_backend_debugfs_write_reg() before passing it to sscanf(). It is a
stack variable so we should not assume it will 0 initialized.
Fixes: cdf01e0809a4 ("iio: backend: add debugFs interface") Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250218-dev-iio-misc-v1-1-bf72b20a1eb8@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Reorder the claiming of direct mode and runtime pm calls to simplify
handling a little. For correct error handling, after the reorder
iio_device_release_direct_mode() must be claimed in an error occurs
in pm_runtime_resume_and_get()
If a match was not found, then the write_raw() callback would return
the odr index, not an error. Return -EINVAL if this occurs.
To avoid similar issues in future, introduce j, a new indexing variable
rather than using ret for this purpose.
Fixes: 79de2ee469aa ("iio: accel: mma8452: claim direct mode during write raw") Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250217140135.896574-2-jic23@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The error `failed to get FW build information` is added for what looks
to be for misdetection of the device property firmware-name.
If the property is missing (such as on non-nvidia HW) this error shows up.
Move the error into the scope of the property parser for "firmware-name"
to avoid showing errors on systems without the firmware-name property.
Building perf in-tree is broken after commit 890a1961c812 ("perf tools:
Create source symlink in perf object dir") which added a 'source' symlink
in the output dir pointing to the source dir.
With in-tree builds, the added 'SOURCE = ...' line is executed multiple
times (I observed 2 during the build plus 2 during installation). This is a
minor inefficiency, in theory not harmful because symlink creation is
assumed to be idempotent. But it is not.
1. ln -sf $(srctree)/tools/perf $(OUTPUT)/source
-> creates /absolute/path/to/linux/tools/perf/source
link to /absolute/path/to/linux/tools/perf
=> OK, that's what was intended
2. ln -sf $(srctree)/tools/perf $(OUTPUT)/source # same command as 1
-> creates /absolute/path/to/linux/tools/perf/perf
link to /absolute/path/to/linux/tools/perf
=> Not what was intended, not idempotent
3. Now the build _should_ create the 'perf' executable, but it fails
The reason is the tricky 'ln' command line. At the first invocation 'ln'
uses the 1st form:
ln [OPTION]... [-T] TARGET LINK_NAME
and creates a link to TARGET *called LINK_NAME*.
At the second invocation $(OUTPUT)/source exists, so 'ln' uses the 3rd
form:
ln [OPTION]... TARGET... DIRECTORY
and creates a link to TARGET *called TARGET* inside DIRECTORY.
Fix by adding -n/--no-dereference to "treat LINK_NAME as a normal file
if it is a symbolic link to a directory", as the manpage says.
Closes: https://lore.kernel.org/all/20241125182506.38af9907@booty/ Fixes: 890a1961c812 ("perf tools: Create source symlink in perf object dir") Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Link: https://lore.kernel.org/r/20250124-perf-fix-intree-build-v1-1-485dd7a855e4@bootlin.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
tools/arch/x86/include/linux doesn't exist but building is working by
virtue of a -I. Building using bazel this fails. Use angle brackets to
include unaligned.h so there isn't an invalid relative include.
Fixes: 5f60d5f6bbc1 ("move asm/unaligned.h to linux/unaligned.h") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Link: https://lore.kernel.org/r/20250225193600.90037-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
After pmu_add_cpu_aliases() is called, perf_pmu__num_events() returns an
incorrect value that double counts common events and doesn't match the
actual count of events in the alias list. This is because after
'cpu_aliases_added == true', the number of events returned is
'sysfs_aliases + cpu_json_aliases'. But when adding 'case
EVENT_SRC_SYSFS' events, 'sysfs_aliases' and 'cpu_json_aliases' are both
incremented together, failing to account that these ones overlap and
only add a single item to the list. Fix it by adding another counter for
overlapping events which doesn't influence 'cpu_json_aliases'.
There doesn't seem to be a current issue because it's used in perf list
before pmu_add_cpu_aliases() so the correct value is returned. Other
uses in tests may also miss it for other reasons like only looking at
uncore events. However it's marked as a fixes commit in case any new fix
with new uses of perf_pmu__num_events() is backported.
Fixes: d9c5f5f94c2d ("perf pmu: Count sys and cpuid JSON events separately") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: James Clark <james.clark@linaro.org> Link: https://lore.kernel.org/r/20250226104111.564443-3-james.clark@linaro.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As recommended by section 4.3.7 ("Synchronization when using system
instructions to progrom the trace unit") of ARM IHI 0064H.b, the
self-hosted trace analyzer must perform a Context synchronization
event between writing to the TRCPRGCTLR and reading the TRCSTATR.
Additionally, add an ISB between the each read of TRCSTATR on
coresight_timeout() when using system instructions to program the
trace unit.
If vhost_scsi_set_endpoint is called multiple times without a
vhost_scsi_clear_endpoint between them, we can hit multiple bugs
found by Haoran Zhang:
1. Use-after-free when no tpgs are found:
This fixes a use after free that occurs when vhost_scsi_set_endpoint is
called more than once and calls after the first call do not find any
tpgs to add to the vs_tpg. When vhost_scsi_set_endpoint first finds
tpgs to add to the vs_tpg array match=true, so we will do:
vhost_vq_set_backend(vq, vs_tpg);
...
kfree(vs->vs_tpg);
vs->vs_tpg = vs_tpg;
If vhost_scsi_set_endpoint is called again and no tpgs are found
match=false so we skip the vhost_vq_set_backend call leaving the
pointer to the vs_tpg we then free via:
This patch fixes an issue where we cannot remove a LIO/target layer
tpg (and structs above it like the target) dir due to the refcount
dropping to -1.
The problem is that if vhost_scsi_set_endpoint detects a tpg is already
in the vs->vs_tpg array or if the tpg has been removed so
target_depend_item fails, the undepend goto handler will do
target_undepend_item on all tpgs in the vs_tpg array dropping their
refcount to 0. At this time vs_tpg contains both the tpgs we have added
in the current vhost_scsi_set_endpoint call as well as tpgs we added in
previous calls which are also in vs->vs_tpg.
Later, when vhost_scsi_clear_endpoint runs it will do
target_undepend_item on all the tpgs in the vs->vs_tpg which will drop
their refcount to -1. Userspace will then not be able to remove the tpg
and will hang when it tries to do rmdir on the tpg dir.
3. Tpg leak:
This fixes a bug where we can leak tpgs and cause them to be
un-removable because the target name is overwritten when
vhost_scsi_set_endpoint is called multiple times but with different
target names.
The bug occurs if a user has called VHOST_SCSI_SET_ENDPOINT and setup
a vhost-scsi device to target/tpg mapping, then calls
VHOST_SCSI_SET_ENDPOINT again with a new target name that has tpgs we
haven't seen before (target1 has tpg1 but target2 has tpg2). When this
happens we don't teardown the old target tpg mapping and just overwrite
the target name and the vs->vs_tpg array. Later when we do
vhost_scsi_clear_endpoint, we are passed in either target1 or target2's
name and we will only match that target's tpgs when we loop over the
vs->vs_tpg. We will then return from the function without doing
target_undepend_item on the tpgs.
Because of all these bugs, it looks like being able to call
vhost_scsi_set_endpoint multiple times was never supported. The major
user, QEMU, already has checks to prevent this use case. So to fix the
issues, this patch prevents vhost_scsi_set_endpoint from being called
if it's already successfully added tpgs. To add, remove or change the
tpg config or target name, you must do a vhost_scsi_clear_endpoint
first.
Fixes: 25b98b64e284 ("vhost scsi: alloc cmds per vq instead of session") Fixes: 4f7f46d32c98 ("tcm_vhost: Use vq->private_data to indicate if the endpoint is setup") Reported-by: Haoran Zhang <wh1sper@zju.edu.cn> Closes: https://lore.kernel.org/virtualization/e418a5ee-45ca-4d18-9b5d-6f8b6b1add8e@oracle.com/T/#me6c0041ce376677419b9b2563494172a01487ecb Signed-off-by: Mike Christie <michael.christie@oracle.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20250129210922.121533-1-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Trying to record a trace on kernel with 64k pages resulted in -ENOMEM.
This happens due to a bug in calculating the number of table pages, which
returns zero. Fix the issue by rounding up.
$ perf record --kcore -e cs_etm/@tmc_etr55,cycacc,branch_broadcast/k --per-thread taskset --cpu-list 1 dd if=/dev/zero of=/dev/null
failed to mmap with 12 (Cannot allocate memory)
Fixes: 8ed536b1e283 ("coresight: catu: Add support for scatter gather tables") Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20250109215348.5483-1-ilkka@os.amperecomputing.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Add error handling for the gb_greybus_init(bg) function call
during the firmware reflash process to maintain consistency
in error handling throughout the codebase. If initialization
fails, log an error and return FW_UPLOAD_ERR_RW_ERROR.
The 's' key is to switch to a new data file and load the data in the
same window. The switch_data_file() will show a popup menu to select
which data file user wants and update the 'input_name' global variable.
But in the cmd_report(), it didn't update the data.path using the new
'input_name' and keep usng the old file. This is fairly an old bug and
I assume people don't use this feature much. :)
Link: https://lore.kernel.org/r/20250211060745.294289-1-namhyung@kernel.org Closes: https://lore.kernel.org/linux-perf-users/89e678bc-f0af-4929-a8a6-a2666f1294a4@linaro.org Fixes: f5fc14124c5cefdd ("perf tools: Add data object to handle perf data file") Reported-by: James Clark <james.clark@linaro.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When initializing a soundwire slave device, an OF node is stored to the
device with refcount incremented. However, the refcount is not
decremented in .release(), thus call of_node_put() in
sdw_slave_release().
Fixes: a2e484585ad3 ("soundwire: core: add device tree support for slave devices") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20241205034844.2784964-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In do_isofs_readdir() when assigning the variable
"struct iso_directory_record *de" the b_data field of the buffer_head
is accessed and an offset is added to it, the size of b_data is 2048
and the offset size is 2047, meaning
"de = (struct iso_directory_record *) (bh->b_data + offset);"
yields the final byte of the 2048 sized b_data block.
The first byte of the directory record (de_len) is then read and
found to be 31, meaning the directory record size is 31 bytes long.
The directory record is defined by the structure:
The fixed portion of this structure occupies 33 bytes. Therefore, a
valid directory record must be at least 33 bytes long
(even without considering the variable-length name field).
Since de_len is only 31, it is insufficient to contain
the complete fixed header.
The code later hits the following sanity check that
compares de_len against the sum of de->name_len and
sizeof(struct iso_directory_record):
if (de_len < de->name_len[0] + sizeof(struct iso_directory_record)) {
...
}
Since the fixed portion of the structure is
33 bytes (up to and including name_len member),
a valid record should have de_len of at least 33 bytes;
here, however, de_len is too short, and the field de->name_len
(located at offset 32) is accessed even though it lies beyond
the available 31 bytes.
This access on the corrupted isofs data triggers a KASAN uninitialized
memory warning. The fix would be to first verify that de_len is at least
sizeof(struct iso_directory_record) before accessing any
fields like de->name_len.
Reported-by: syzbot <syzbot+812641c6c3d7586a1613@syzkaller.appspotmail.com> Tested-by: syzbot <syzbot+812641c6c3d7586a1613@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=812641c6c3d7586a1613 Fixes: 2deb1acc653c ("isofs: fix access to unallocated memory when reading corrupted filesystem") Signed-off-by: Qasim Ijaz <qasdev00@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://patch.msgid.link/20250211195900.42406-1-qasdev00@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The phy needs to know its identity in the system (phy0 or phy1 on rk3588)
for some actions and the driver currently contains code abusing of_alias
for that.
Devicetree aliases are always optional and should not be used for core
device functionality, so instead keep a list of phys on a soc in the
of_device_data and find the phy-id by comparing against the mapped
register-base.
Update inode->i_mapping->a_ops when the compression state changes to
ensure correct address space operations.
Clear ATTR_FLAG_SPARSED/FILE_ATTRIBUTE_SPARSE_FILE when enabling
compression to prevent flag conflicts.
v2:
Additionally, ensure that all dirty pages are flushed and concurrent access
to the page cache is blocked.
Fixes: 6b39bfaeec44 ("fs/ntfs3: Add support for the compression attribute") Reported-by: Kun Hu <huk23@m.fudan.edu.cn>, Jiaji Qin <jjtan24@m.fudan.edu.cn> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The w1_uart_probe() function calls w1_uart_serdev_open() (which includes
devm_serdev_device_open()) before setting the client ops via
serdev_device_set_client_ops(). This ordering can trigger a NULL pointer
dereference in the serdev controller's receive_buf handler, as it assumes
serdev->ops is valid when SERPORT_ACTIVE is set.
This is similar to the issue fixed in commit 5e700b384ec1
("platform/chrome: cros_ec_uart: properly fix race condition") where
devm_serdev_device_open() was called before fully initializing the
device.
Fix the race by ensuring client ops are set before enabling the port via
w1_uart_serdev_open().
Fixes: a3c08804364e ("w1: add UART w1 bus driver") Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com> Acked-by: Christoph Winklhofer <cj.winklhofer@gmail.com> Link: https://lore.kernel.org/r/20250111181803.2283611-1-chenyuan0y@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is also used in util/comm.c now, so instead of selectively doing
the feature test, always do it. If it's ever used anywhere else it's
less likely to cause another build failure.
This doesn't remove the need to manually include libc_compat.h, and
missing that will still cause an error for glibc < 2.26. There isn't a
way to fix that without poisoning reallocarray like libbpf did, but that
has other downsides like making memory debugging tools less useful. So
for Perf keep it like this and we'll have to fix up any missed includes.
Fixes the following build error:
util/comm.c:152:31: error: implicit declaration of function
'reallocarray' [-Wimplicit-function-declaration]
152 | tmp = reallocarray(comm_strs->strs,
| ^~~~~~~~~~~~
Fixes: 13ca628716c6 ("perf comm: Add reference count checking to 'struct comm_str'") Reported-by: Ali Utku Selen <ali.utku.selen@arm.com> Signed-off-by: James Clark <james.clark@linaro.org> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20250129154405.777533-1-james.clark@linaro.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Legacy events typically don't have a PMU when added leading to
mismatched legacy/non-legacy cases in find_stat. Use evsel__find_pmu
to make sure the evsel PMU is looked up. Update the evsel__find_pmu
code to look for the PMU using the extended config type or, for legacy
hardware/hw_cache events on non-hybrid systems, just use the core PMU.
Before:
```
$ perf stat -e cycles,cpu/instructions/ -a sleep 1
Performance counter stats for 'system wide':
215,309,764 cycles
44,326,491 cpu/instructions/
1.002555314 seconds time elapsed
```
After:
```
$ perf stat -e cycles,cpu/instructions/ -a sleep 1
Performance counter stats for 'system wide':
990,676,332 cycles
1,235,762,487 cpu/instructions/ # 1.25 insn per cycle
Fixes: 3612ca8e2935 ("perf stat: Fix the hard-coded metrics calculation on the hybrid") Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: James Clark <james.clark@linaro.org> Tested-by: Leo Yan <leo.yan@arm.com> Tested-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20250109222109.567031-3-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This clock can't be enable with VENUS_CORE0 GDSC turned off. But that
GDSC is under HW control so it can be turned off at any moment.
Instead of checking the dependent clock we can just vote for it to
enable later when GDSC gets turned on.
When instantiating PWM, the bypass should be set to false. The field
is used for the selected Intel SoCs that do not have PWM feature enabled
in their pin control IPs.
Fixes: eb78d3604d6b ("pinctrl: intel: Enumerate PWM device when community has a capability") Reported-by: Alexis GUILLEMET <alexis.guillemet@dunasys.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Alexis GUILLEMET <alexis.guillemet@dunasys.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to the HMAC RFC, the authentication key
can be 0 bytes, and the hardware can handle this
scenario. Therefore, remove the incorrect validation
for this case.
Fixes: 2f072d75d1ab ("crypto: hisilicon - Add aead support on SEC2") Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Syzbot reported a slab-use-after-free with the following call trace:
==================================================================
BUG: KASAN: slab-use-after-free in nla_put+0xd3/0x150 lib/nlattr.c:1099
Read of size 5 at addr ffff888140ea1c60 by task syz.0.988/10025
This is because if rename device happens, the old name is freed in
ib_device_rename() with lock, but ib_device_notify_register() may visit
the dev name locklessly by event RDMA_REGISTER_EVENT or
RDMA_NETDEV_ATTACH_EVENT.
Fix this by hold devices_rwsem in ib_device_notify_register().
Reported-by: syzbot+f60349ba1f9f08df349f@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=25bc6f0ed2b88b9eb9b8 Fixes: 9cbed5aab5ae ("RDMA/nldev: Add support for RDMA monitoring") Signed-off-by: Wang Liang <wangliang74@huawei.com> Link: https://patch.msgid.link/20250313092421.944658-1-wangliang74@huawei.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2e4be0d011f2 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
was intended to ensure alignment of the stack pointer; but it also moved
the initialization of the "stack" variable down into the loop header.
This was likely intended as a no-op cleanup, since the commit
message does not mention it; however, this caused a behavioral change
because the value of "regs" is different between the two places.
Originally, get_stack_pointer() used the regs provided by the caller; after
that commit, get_stack_pointer() instead uses the regs at the top of the
stack frame the unwinder is looking at. Often, there are no such regs at
all, and "regs" is NULL, causing get_stack_pointer() to fall back to the
task's current stack pointer, which is not what we want here, but probably
happens to mostly work. Other times, the original regs will point to
another regs frame - in that case, the linear guess unwind logic in
show_trace_log_lvl() will start unwinding too far up the stack, causing the
first frame found by the proper unwinder to never be visited, resulting in
a stack trace consisting purely of guess lines.
Fix it by moving the "stack = " assignment back where it belongs.
While commit fa15d8c69238 ("leds: Fix set_brightness_delayed() race")
successfully forces led_set_brightness() to be called with LED_OFF at
least once when switching from blinking to LED on state so that
hw-blinking can be disabled, another race remains. Indeed in
led_set_brightness(LED_OFF) followed by led_set_brightness(any)
scenario the following CPU scheduling can happen:
CPU0 CPU1
---- ----
set_brightness_delayed() {
test_and_clear_bit(BRIGHTNESS_OFF)
led_set_brightness(LED_OFF) {
set_bit(BRIGHTNESS_OFF)
queue_work()
}
led_set_brightness(any) {
set_bit(BRIGHTNESS)
queue_work() //already queued
}
test_and_clear_bit(BRIGHTNESS)
/* LED set with brightness any */
}
/* From previous CPU1 queue_work() */
set_brightness_delayed() {
test_and_clear_bit(BRIGHTNESS_OFF)
/* LED turned off */
test_and_clear_bit(BRIGHTNESS)
/* Clear from previous run, LED remains off */
In that case the led_set_brightness(LED_OFF)/led_set_brightness(any)
sequence will be effectively executed in reverse order and LED will
remain off.
With the introduction of commit 32360bf6a5d4 ("leds: Introduce ordered
workqueue for LEDs events instead of system_wq") the race is easier to
trigger as sysfs brightness configuration does not wait for
set_brightness_delayed() work to finish (flush_work() removal).
Use delayed_set_value to optionnally re-configure brightness after a
LED_OFF. That way a LED state could be configured more that once but
final state will always be as expected. Ensure that delayed_set_value
modification is seen before set_bit() using smp_mb__before_atomic().
If offset end up being high enough, right hand expression in functions
like sm501_gpio_set() shifted left for that number of bits, may
not fit in int type.
Just in case, fix that by using BIT() both as an option safe from
overflow issues and to make this step look similar to other gpio
drivers.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
When cur_qp isn't NULL, in order to avoid fetching the QP from
the radix tree again we check if the next cqe QP is identical to
the one we already have.
The bug however is that we are checking if the QP is identical by
checking the QP number inside the CQE against the QP number inside the
mlx5_ib_qp, but that's wrong since the QP number from the CQE is from
FW so it should be matched against mlx5_core_qp which is our FW QP
number.
Otherwise we could use the wrong QP when handling a CQE which could
cause the kernel trace below.
This issue is mainly noticeable over QPs 0 & 1, since for now they are
the only QPs in our driver whereas the QP number inside mlx5_ib_qp
doesn't match the QP number inside mlx5_core_qp.
may_goto uses an additional 8 bytes on the stack, which causes the
interpreters[] array to go out of bounds when calculating index by
stack_size.
1. If a BPF program is rewritten, re-evaluate the stack size. For non-JIT
cases, reject loading directly.
2. For non-JIT cases, calculating interpreters[idx] may still cause
out-of-bounds array access, and just warn about it.
3. For jit_requested cases, the execution of bpf_func also needs to be
warned. So move the definition of function __bpf_prog_ret0_warn out of
the macro definition CONFIG_BPF_JIT_ALWAYS_ON.
With PWRSTS_OFF_ON, USB GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of USB controller from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
The charge input threshold voltage register on the MAX77693 PMIC accepts
four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v.
Due to an oversight, the driver calculated the values for 4.7v and above
starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000]
gives 0).
Add 1 to the calculation to ensure that 4.7v is converted to a register
value of 0x1 and that the other two voltages are converted correctly as
well.
Fixes: 87c2d9067893 ("power: max77693: Add charger driver for Maxim 77693") Signed-off-by: Artur Weber <aweber.kernel@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
PUSH_REGS with save_ret=1 is used by interrupt entry helper functions that
initially start with a UNWIND_HINT_FUNC ORC state.
However, save_ret=1 means that we clobber the helper function's return
address (and then later restore the return address further down on the
stack); after that point, the only thing on the stack we can unwind through
is the IRET frame, so use UNWIND_HINT_IRET_REGS until we have a full
pt_regs frame.
( An alternate approach would be to move the pt_regs->di overwrite down
such that it is the final step of pt_regs setup; but I don't want to
rearrange entry code just to make unwinding a tiny bit more elegant. )
Fixes: 9e809d15d6b6 ("x86/entry: Reduce the code footprint of the 'idtentry' macro") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-1-acd774364768@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The bit index of the peripheral clock for mmc A is wrong
This was probably not a problem for mmc A as the peripheral is likely left
enabled by the bootloader.
No issues has been reported so far but it could be a problem, most likely
some form of conflict between the ethernet and mmc A clock, breaking
ethernet on init.
Use the value provided by the documentation for mmc A before this
becomes an actual problem.
The firmware already handles parity errors reported by the accelerators
by clearing them through the corresponding SSMSOFTERRORPARITY register.
To ensure consistent behavior and prevent race conditions between the
driver and firmware, remove the logic that checks the SSMSOFTERRORPARITY
registers.
Additionally, change the return type of the function
adf_handle_rf_parr_err() to void, as it consistently returns false.
Parity errors are recoverable and do not necessitate a device reset.
Fixes: 895f7d532c84 ("crypto: qat - add handling of errors from ERRSOU2 for QAT GEN4") Signed-off-by: Bairavi Alagappan <bairavix.alagappan@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sparse is not happy about implementation of the NPCM8XX_PINCFG()
pinctrl-npcm8xx.c:1314:9: warning: obsolete array initializer, use C99 syntax
pinctrl-npcm8xx.c:1315:9: warning: obsolete array initializer, use C99 syntax
...
pinctrl-npcm8xx.c:1412:9: warning: obsolete array initializer, use C99 syntax
pinctrl-npcm8xx.c:1413:9: warning: too many warnings
which uses index-based assignment in a wrong way, i.e. it missed
the equal sign and hence the index is simply ignored, while the
entries are indexed naturally. This is not a problem as the pin
numbering repeats the natural order, but it might be in case of
shuffling the entries. Fix this by adding missed equal sign and
reformat a bit for better readability.
On powerpc, a CPU does not necessarily originate from NUMA node 0.
This contrasts with architectures like x86, where CPU 0 is not
hot-pluggable, making NUMA node 0 a consistently valid node.
This discrepancy can lead to failures when creating a map on NUMA
node 0, which is initialized by default, if no CPUs are allocated
from NUMA node 0.
This patch fixes the issue by setting NUMA_NO_NODE (-1) for map
creation for this selftest.
The 32k clock reference a parent 'cts_slow_oscin' with a fixme note saying
that this clock should be provided by AO controller.
The HW probably has this clock but it does not exist at the moment in
any controller implementation. Furthermore, referencing clock by the global
name should be avoided whenever possible.
There is no reason to keep this hack around, at least for now.
Several clocks used by both g12a and g12b use the g12a cpu A clock hw
pointer as clock parent. This is incorrect on g12b since the parents of
cluster A cpu clock are different. Also the hw clock provided as parent to
these children is not even registered clock on g12b.
Fix the problem by reverting to the global namespace and let CCF pick
the appropriate, as it is already done for other clocks, such as
cpu_clk_trace_div.
Tegra devices have an 'sfsel' bit field that determines whether a pin
operates in SFIO (Special Function I/O) or GPIO mode. Currently,
tegra_pinctrl_gpio_disable_free() sets this bit when releasing a GPIO.
However, tegra_pinctrl_set_mux() can be called independently in certain
code paths where gpio_disable_free() is not invoked. In such cases, failing
to set the SFIO mode could lead to incorrect pin configurations, resulting
in functional issues for peripherals relying on SFIO.
This patch ensures that whenever set_mux() is called, the SFIO mode is
correctly set in the Mux Register if the 'sfsel' bit is present. This
prevents situations where the pin remains in GPIO mode despite being
configured for SFIO use.
The ib_post_receive_mads() function handles posting receive work
requests (WRs) to MAD QPs and is called in two cases:
1) When a MAD port is opened.
2) When a receive WQE is consumed upon receiving a new MAD.
Whereas, if MADs arrive during the port open phase, a race condition
might cause an extra WR to be posted, exceeding the QP’s capacity.
This leads to failures such as:
infiniband mlx5_0: ib_post_recv failed: -12
infiniband mlx5_0: Couldn't post receive WRs
infiniband mlx5_0: Couldn't start port
infiniband mlx5_0: Couldn't open port 1
Fix this by checking the current receive count before posting a new WR.
If the QP’s receive queue is full, do not post additional WRs.
When the lookup is retried after instance construction, it uses
the type and mask from the larval, which may not match the values
used by the caller. For example, if the caller is requesting for
a !NEEDS_FALLBACK algorithm, it may end up getting an algorithm
that needs fallbacks.
Fix this by making the caller supply the type/mask and using that
for the lookup.
Commit 243f8ffc883a1 ("power: supply: bq27xxx_battery: Notify also about
status changes") intended to notify userspace when the status changes,
based on the flags register. However, the cached state is updated too
early, before the flags are tested for any changes. Remove the premature
update.
Fixes: 243f8ffc883a1 ("power: supply: bq27xxx_battery: Notify also about status changes") Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Link: https://lore.kernel.org/r/20241125152945.47937-1-absicsz@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For example MSM8974 has mx voltage rail exposed as regulator and only cx
voltage rail is exposed as power domain. This power domain (cx) is
attached internally in power domain and cannot be attached in this driver.
Fixes: 8750cf392394 ("remoteproc: qcom_q6v5_mss: Allow replacing regulators with power domains") Co-developed-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com> Reviewed-by: Stephan Gerhold <stephan.gerhold@linaro.org> Signed-off-by: Luca Weiss <luca@lucaweiss.eu> Link: https://lore.kernel.org/r/20250217-msm8226-modem-v5-4-2bc74b80e0ae@lucaweiss.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When invalidating an address range in mlx5, there is an optimization to
do UMR operations in chunks.
Previously, the invalidation counter was incorrectly updated for the
same indexes within a chunk. Now, the invalidation counter is updated
only when a chunk is complete and mlx5r_umr_update_xlt() is called.
This ensures that the counter accurately represents the number of pages
invalidated using UMR.
Commit 467f432a521a ("RDMA/core: Split port and device counter sysfs
attributes") accidentally almost exposed hw counters to non-init net
namespaces. It didn't expose them fully, as an attempt to read any of
those counters leads to a crash like this one:
The problem can be reproduced using the following steps:
ip netns add foo
ip netns exec foo bash
cat /sys/class/infiniband/mlx4_0/hw_counters/*
The panic occurs because of casting the device pointer into an
ib_device pointer using container_of() in hw_stat_device_show() is
wrong and leads to a memory corruption.
However the real problem is that hw counters should never been exposed
outside of the non-init net namespace.
Fix this by saving the index of the corresponding attribute group
(it might be 1 or 2 depending on the presence of driver-specific
attributes) and zeroing the pointer to hw_counters group for compat
devices during the initialization.
With this fix applied hw_counters are not available in a non-init
net namespace:
find /sys/class/infiniband/mlx4_0/ -name hw_counters
/sys/class/infiniband/mlx4_0/ports/1/hw_counters
/sys/class/infiniband/mlx4_0/ports/2/hw_counters
/sys/class/infiniband/mlx4_0/hw_counters
ip netns add foo
ip netns exec foo bash
find /sys/class/infiniband/mlx4_0/ -name hw_counters
Fixes: 467f432a521a ("RDMA/core: Split port and device counter sysfs attributes") Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Leon Romanovsky <leon@kernel.org> Cc: Maher Sanalla <msanalla@nvidia.com> Cc: linux-rdma@vger.kernel.org Cc: linux-kernel@vger.kernel.org Link: https://patch.msgid.link/20250227165420.3430301-1-roman.gushchin@linux.dev Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
