Torrey Searle [Wed, 9 May 2018 13:31:47 +0000 (15:31 +0200)]
res/res_rtp_asterisk: ensure marker bit is correctly set on ssrc change
Certain race conditions between changing bridge types and DTMF can
cause the current FLAG_NEED_MARKER_BIT to send the marker bit before
the actual first packet of native bridging.
This logic keeps track of the ssrc the bridge is currently sending
and will correctly ensure the marker bit is set if SSRC as changed
from the previous sent packet.
Jaco Kroon [Tue, 8 May 2018 09:59:02 +0000 (11:59 +0200)]
manager: fix digest auth for ami/http mechanism.
Due to a fixed size buffer the digest authentication could be
incorrectly calculated if a large URI was provided, causing
authentication failure. The buffer is now dynamically allocated to allow
any size URI within the normal limits of the HTTP request size.
Joshua Colp [Thu, 3 May 2018 11:34:32 +0000 (11:34 +0000)]
res_ari: Remove requirement that body exists when debug is on.
The "ari set debug" code for incoming requests incorrectly assumed
that all requests would contain a body. If one did not exist the
request would be incorrectly rejected. The response that was sent
was also incomplete as an incorrect function was used to construct
the response.
The code has now been changed to no longer require a request to have
a body and the response updated to use the correct function.
Kevin Harwell [Wed, 18 Apr 2018 20:59:38 +0000 (15:59 -0500)]
translate: generic plc not filled in after translation
If during translation a codec could not handle a given frame the translation
core would return NULL, thus not passing along the "missing" frame. Due to this
there was no frame to apply generic plc to, thus rendering it useless.
This patch makes it so the translation core produces an interpolated slin frame
in the cases where an attempt was made to translate to slin, but failed. This
interpolated frame is then passed along and can be used by the generic plc
algorithms to fill in the frame.
Alexander Traud [Fri, 20 Apr 2018 10:40:21 +0000 (12:40 +0200)]
menuselect: Add DragonFly BSD.
In DragonFly BSD, added libraries from ports are placed into /usr/local.
Therefore, this directory must be added for the preprocessor, compiler, and
linker.
Beside that, the script ./configure was updated:
* OSARCH list was outdated and not used, removed.
* AC_CANONICAL_BUILD was not used.
* _REENTRANT, this feature test macro is obsolete.
George Joseph [Tue, 10 Apr 2018 21:09:49 +0000 (15:09 -0600)]
app_sendtext: Enhance SendText to support Enhanced Messaging
SendText now accepts new channel variables that can be used
to override the To and From display names and set the Content-Type
of a message. Since you can now set Content-Type, other text/*
content types are now valid.
George Joseph [Wed, 27 Sep 2017 16:44:53 +0000 (10:44 -0600)]
bridge_softmix: Forward TEXT frames
Core bridging and, more specifically, bridge_softmix have been
enhanced to relay received frames of type TEXT or TEXT_DATA to all
participants in a softmix bridge. res_pjsip_messaging and
chan_pjsip have been enhanced to take advantage of this so when
res_pjsip_messaging receives an in-dialog MESSAGE message from a
user in a conference call, it's relayed to all other participants
in the call.
res_pjsip_messaging already queues TEXT frames to the channel when
it receives an in-dialog MESSAGE from an endpoint and chan_pjsip
will send an MESSAGE when it gets a TEXT frame. On a normal
point-to-point call, the frames are forwarded between the two
correctly. bridge_softmix was not though so messages weren't
getting forwarded to conference bridge participants. Even if they
were, the bridging code had no way to tell the participants who
sent the message so it would look like it came from the bridge
itself.
* The TEXT frame type doesn't allow storage of any meta data, such
as sender, on the frame so a new TEXT_DATA frame type was added that
uses the new ast_msg_data structure as its payload. A channel
driver can queue a frame of that type when it receives a message
from outside. A channel driver can use it for sending messages
by implementing the new send_text_data channel tech callback and
setting the new AST_CHAN_TP_SEND_TEXT_DATA flag in its tech
properties. If set, the bridging/channel core will use it instead
of the original send_text callback and it will get the ast_msg_data
structure. Channel drivers aren't required to implement this. Even
if a TEXT_DATA enabled driver uses it for incoming messages, an
outgoing channel driver that doesn't will still have it's send_text
callback called with only the message text just as before.
* res_pjsip_messaging now creates a TEXT_DATA frame for incoming
in-dialog messages and sets the "from" to the display name in the
"From" header, or if that's empty, the caller id name from the
channel. This allows the chat client user to set a friendly name
for the chat.
* bridge_softmix now forwards TEXT and TEXT_DATA frames to all
participants (except the sender).
* A new function "ast_sendtext_data" was added to channel which
takes an ast_msg_data structure and calls a channel's
send_text_data callback, or if that's not defined, the original
send_text callback.
* bridge_channel now calls ast_sendtext_data for TEXT_DATA frame
types and ast_sendtext for TEXT frame types.
* chan_pjsip now uses the "from" name in the ast_msg_data structure
(if it exists) to set the "From" header display name on outgoing text
messages.
George Joseph [Fri, 13 Apr 2018 20:17:36 +0000 (14:17 -0600)]
utils: Add ast_assert_return
Similar to pjproject's PJ_ASSERT_RETURN macro, this one will do the
following...
If the assert passes... NoOp
If the assert fails and AST_DEVMODE is defined, execute ast_assert()
then, if DO_CRASH isn't set, return from the calling function with
the supplied value.
If the assert fails and AST_DEVMODE is not defined, return from the
calling function with the supplied value.
The macro will execute a return without a value if one isn't suppled.
Ben Ford [Fri, 13 Apr 2018 19:32:48 +0000 (14:32 -0500)]
res_musiconhold: Don't restart MOH from beginning after announcement.
This reverts a problem introduced by the fix for ASTERISK_24329.
Now, when an announcement is played while waiting in a queue, music on
hold will not restart from the beginning of the sound file and will
instead pick up where it left off. However, the incorrect behavior in
ASTERISK_24329 is now present again; if an announcement X seconds
long is played when music on hold starts, music on hold will start X
seconds into the file.
Richard Mudgett [Tue, 27 Mar 2018 16:04:42 +0000 (11:04 -0500)]
res_pjsip.c: Split ast_sip_push_task_synchronous() to fit expectations.
ast_sip_push_task_synchronous() did not necessarily execute the passed in
task under the specified serializer. If the current thread is any
registered pjsip thread then it would execute the task immediately instead
of under the specified serializer. Reentrancy issues could result if the
task does not execute with the right serializer.
The original reason ast_sip_push_task_synchronous() checked to see if the
current thread was a registered pjsip thread was because of a deadlock
with masquerades and the channel technology's fixup callback
(ASTERISK_22936). A subsequent masquerade deadlock fix (ASTERISK_24356)
involving call pickups avoided the original deadlock situation entirely.
The PJSIP channel technology's fixup callback no longer needed to call
ast_sip_push_task_synchronous().
However, there are a few places where this unexpected behavior is still
required to avoid deadlocks. The pjsip monitor thread executes callbacks
that do calls to ast_sip_push_task_synchronous() that would deadlock if
the task were actually pushed to the specified serializer. I ran into one
dealing with the pubsub subscriptions where an ao2 destructor called
ast_sip_push_task_synchronous().
* Split ast_sip_push_task_synchronous() into
ast_sip_push_task_wait_servant() and ast_sip_push_task_wait_serializer().
ast_sip_push_task_wait_servant() has the old behavior of
ast_sip_push_task_synchronous(). ast_sip_push_task_wait_serializer() has
the new behavior where the task is always executed by the specified
serializer or a picked serializer if one is not passed in. Both functions
behave the same if the current thread is not a SIP servant.
* Redirected ast_sip_push_task_synchronous() to
ast_sip_push_task_wait_servant() to preserve API for released branches.
Richard Mudgett [Thu, 22 Mar 2018 00:43:21 +0000 (19:43 -0500)]
pjsip_scheduler.c: Fix some corner cases.
* Fix the periodic interval wander because it may take significant time
between the sched thread queueing the task in the serializer and the
serializer actually executing the task. The time it takes to actually
execute the task was already taken into account.
* Pass a schtd ref to the serializer when we queue a scheduled task on
the serializer. We don't want it going away on us while it is in the
serializer queue.
* Skip the scheduled task if the task was canceled between queueing the
task to the serializer and the serializer actually executing the task.
* Reorder struct ast_sip_sched_task to avoid unnecessary padding. Removed
task_id and added next_periodic.
* Hold a ref to the passed in serializer so the serializer cannot go away
on the scheduled task.
cdr_mysql: Compile error because MYSQL_PORT definition is missing
If it is not defined, it will add MYSQL_PORT definition. After some
research on MySQL/MariaDB development tree, I couldn't find any reference
to MYSQL_PORT definition in include files.
res_pjsip_session: Rewrite o= with external_media_address.
It now appends the external IP address on the
o= line of the SDP packet. The decision was made to write
the numeric IP address as opposed to the RFC that states
the FQDN should be used if and when available. We believe
the usage of literal IP address will help avoid
potential problems.
Nathan Bruning [Thu, 22 Feb 2018 18:18:48 +0000 (19:18 +0100)]
res_pjsip_notify.c: enable in-dialog NOTIFY
This patch adds support to send in-dialog SIP NOTIFY commands on
chan_pjsip channels, similar to the functionality recently added
for chan_sip (ASTERISK_27461).
This extends res_pjsip_notify to allow for in-dialog messages.
Richard Mudgett [Thu, 22 Mar 2018 18:35:04 +0000 (13:35 -0500)]
pjsip_scheduler.c: Fix ao2 usage errors.
* Removed several invalid uses of OBJ_NOLOCK. These uses resulted in the
'tasks' container being accessed without a lock in a multi-threaded
environment. A recipe for crashes.
* Removed needlessly obtaining schtd object references. If the caller
providing you a pointer to an object doesn't have a valid reference then
you cannot safely get one from it.
* Getting a ref to 'tasks' when you aren't copying the pointer into
another location is useless. The 'tasks' container pointer is global.
* Removed many unnecessary uses of RAII_VAR.
* Make ast_sip_schedule_task() name parameter const.
Corey Farrell [Fri, 23 Mar 2018 11:49:59 +0000 (07:49 -0400)]
Build System: Enable python3 compatibility.
* Consistently use spaces in rest-api-templates/asterisk_processor.py.
* Exclude third-party from docs/full-en_US.xml.
* Add docs/full-en_US.xml to .gitignore.
* Use list() to convert python3 view.
* Use python3 print function.
* Replace cmp() with equivalent equation.
* Replace reference to out of scope subtype variable with name
parameter.
* Use unescaping triple bracket notation in mustache templates where
needed. This causes behavior of Python2 to be maintained when using
Python3.
* Fix references to has_websocket / is_websocket in
res_ari_resource.c.mustache.
* Update calculation of has_websocket to use any().
* Use unicode mode for writing output file in transform.py.
* Replace 'from swagger_model import *' with explicit import of required
symbols.
* Add missing 'import os'
* Fix invalid reference to swagger_version from exception handler.
I have not tested voicemailpwcheck.py, only the print syntax has
been fixed.
Richard Mudgett [Thu, 5 Apr 2018 23:33:40 +0000 (18:33 -0500)]
res_pjsip_refer/chan_sip: Fix INVITE with replaces transfer to ConfBridge
There is a problem when an INVITE-with-Replaces transfer targets a channel
in a ConfBridge. The transfer will unconditionally swap out the
ConfBridge channel. Unfortunately, the ConfBridge state will not be aware
of this change. Unexpected behavior will happen as a result since
ConfBridge channels currently can only be replaced by a masquerade and not
normal bridge channel moves.
* We just need to pretend that the channel isn't in a bridge (like other
transfer methods already do) so the transfer channel will masquerade into
the ConfBridge channel.
Richard Mudgett [Thu, 5 Apr 2018 22:40:52 +0000 (17:40 -0500)]
chan_sip.c: Fix INVITE with replaces channel ref leak.
Given the below call scenario:
A -> Ast1 -> B
C <- Ast2 <- B
1) A calls B through Ast1
2) B calls C through Ast2
3) B transfers A to C
When party B transfers A to C, B sends a REFER to Ast1 causing Ast1 to
send an INVITE with replaces to Ast2. Ast2 then leaks a channel ref of
the channel between Ast1 and Ast2.
Channel ref leaks are easily seen in the CLI "core show channels" output.
The leaked channels appear in the output but you can do nothing with them
and they never go away unless you restart Asterisk.
* Properly account for the channel refs when imparting a channel into a
bridge when handling an INVITE with replaces in handle_invite_replaces().
The ast_bridge_impart() function steals a channel ref but the code didn't
account for how many refs were held by the code at the time and which ref
was stolen.
* Eliminated RAII_VAR in handle_invite_replaces().
Build System: Strip '-std=c99' from CFLAGS provided by libraries.
Asterisk requires GNU C extensions. On some systems certain libraries
may incorrectly push -std=c99 into CFLAGS, thus breaking the build.
This change causes that flag to be stripped so the Asterisk build is not
broken by those libraries. This change is made for both pkgconfig and
tool based libraries.
George Joseph [Sun, 25 Mar 2018 18:35:12 +0000 (12:35 -0600)]
pjroject_bundled: Add already-destroyed check to tsx_timer_callback
There have been cases that when the transaction timer callback is called
the tsx is already destroyed. This causes a crash. We now check the
tsx state and return if the tsx is already destroyed.
Richard Mudgett [Thu, 29 Mar 2018 22:07:56 +0000 (17:07 -0500)]
res_pjsip: Fix deadlock on reliable transport shutdown.
A deadlock can happen when the PJSIP monitor thread is shutting down a
connection oriented transport (TCP/TLS) used by a subscription at the same
time as another thread tries to send something for that subscription. The
deadlock is between the pjsip monitor thread attempting to get the dialog
lock and another thread sending something for that dialog when it tries to
get the transport manager lock.
* res_pjsip_pubsub.c: Avoid the deadlock by pushing the subscription
removal to the subscription serializer.
* res_pjsip_registrar.c: Pushed off incoming registration contact removals
to a default serializer as a precaution. Removing the contacts involves
sorcery access which in this case will involve database access. Depending
upon the setup, the database may not be on the same machine and could take
awhile. We don't want to hold up the pjsip monitor thread with
potentially long access times.
George Joseph [Sun, 25 Mar 2018 18:12:39 +0000 (12:12 -0600)]
pjproject_bundled: Add patch for pj_atomic crashes
There have been some crashes in the past where something attempts
to use a pj_atomic after it's already been destroyed. This patch
tries to prevent it by making sure that pj_atomic_destroy sets
its mutex to NULL when it's done. The pj_mutex functions already check
for a NULL mutex and just return PJ_EINVAL.
Teluu also added some checks to the win32 implementation as well.
Corey Farrell [Wed, 28 Mar 2018 13:18:06 +0000 (09:18 -0400)]
core: Create main/options.c.
This creates a separate source to 'own' symbols related to options.h and
paths.h. This significantly reduces the number of exports created by
main/asterisk.o. This change is required to eventually be able to
link unmodified Asterisk sources to utilities and/or stand-alone tests.
Kevin Harwell [Tue, 20 Mar 2018 20:28:12 +0000 (15:28 -0500)]
bridge_softmix: Clear "talking" when a channel is put on hold
This patch clears the talking flag from the channel (if already set), and
notifies listeners when that channel is put on hold. Note however, if the
endpoint continues to send audio frames and these are received by the bridge
then that channel will be put back into a "talking" state even though they
are on hold.
Ross Beer [Wed, 7 Mar 2018 12:15:05 +0000 (12:15 +0000)]
pjsip_transport_events.c: Fix crash using stale transport pointer.
Apparently it is possible for the transport to be destroyed without
triggering the transport callback logic. As a result the transport gets
destroyed and we have a stale pointer in the active_transports container.
* Invoke the transport monitor callback checks when the transport is
destroyed in addition to when it is disconnected and shutdown.
Alexander Traud [Tue, 20 Mar 2018 16:55:56 +0000 (17:55 +0100)]
BuildSystem: For consistency, avoid extra libs to be empty.
AST_EXT_LIB_CHECK has several optional parameters. When an optional parameter
is left empty, [] is used to indicate this. However, this is done in the script
./configure only then, when a further parameter is not empty. For example, when
no extra libraries are needed to test the checked library, parameter 5 is not
mentioned. Except parameter 6 and higher are used, then parameter 5 must be
empty.
However, this general rule was broken
* three times for parameter 5 (extra libs) and
* three times for parameter 4 (header)
as found via the Regular Expression \[\]\). In case of parameter 5, all cases
were changed, because that happened for no reason. In case of parameter 4, an
[] improves readability actually. Therefore for parameter 4, the only case which
did not do it was changed. All this aims to create more consistency: Only do
something different if there is a reason to do so.
projects / thirdparty / asterisk.git / log
