Enable proper pin multiplexing for the I2S1 8-channel transmit interface by
adding the default pinctrl configuration which esures correct signal routing
and avoids pinmux conflicts during audio playback.
Changes fix the error
[ 116.856643] [ T782] rockchip-pinctrl pinctrl: pin gpio1-10 already requested by affinity_hint; cannot claim for fe410000.i2s
[ 116.857567] [ T782] rockchip-pinctrl pinctrl: error -EINVAL: pin-42 (fe410000.i2s)
[ 116.857618] [ T782] rockchip-pinctrl pinctrl: error -EINVAL: could not request pin 42 (gpio1-10) from group i2s1m0-sdi1 on device rockchip-pinctrl
[ 116.857659] [ T782] rockchip-i2s-tdm fe410000.i2s: Error applying setting, reverse things back
I2S1 on the M1 to the codec in the RK809 only uses the SCLK, LRCK, SDI0
and SDO0 signals, so limit the claimed pins to those.
1. Wire in SIGSEGV handler that terminates the test with a failure code.
2. Use "--lock-cgroup" instead of "-g"; "-g" was proposed but never
merged. See commit 4d1792d0a2564caf ("perf lock contention: Add
--lock-cgroup option")
3. Call cleanup() on every normal exit so trap_cleanup() doesn't mistake
it for an unexpected signal and emit a false-negative "Unexpected
signal in main" message.
Before patch:
# ./perf test -vv "lock contention"
85: kernel lock contention analysis test:
--- start ---
test child forked, pid 610711
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --lock-cgroup
Unexpected signal in test_aggr_cgroup
---- end(0) ----
85: kernel lock contention analysis test : Ok
After patch:
# ./perf test -vv "lock contention"
85: kernel lock contention analysis test:
--- start ---
test child forked, pid 602637
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
Testing perf lock contention --lock-cgroup
Testing perf lock contention --type-filter (w/ spinlock)
Testing perf lock contention --lock-filter (w/ tasklist_lock)
Testing perf lock contention --callstack-filter (w/ unix_stream)
[Skip] Could not find 'unix_stream'
Testing perf lock contention --callstack-filter with task aggregation
[Skip] Could not find 'unix_stream'
Testing perf lock contention --cgroup-filter
Testing perf lock contention CSV output
---- end(0) ----
85: kernel lock contention analysis test : Ok
Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ananth Narayan <ananth.narayan@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Santosh Shukla <santosh.shukla@amd.com> Cc: Tycho Andersen <tycho@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In test_record_concurrent, as stderr is sent to /dev/null, error
messages are hidden. Change this to gather the error messages and dump
them on failure.
Some minor sh->bash changes to add some more diagnostics in
trap_cleanup.
Reviewed-by: James Clark <james.clark@linaro.org> Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Rajeev <atrajeev@linux.ibm.com> Cc: Blake Jones <blakejones@google.com> Cc: Chun-Tse Shao <ctshao@google.com> Cc: Collin Funk <collin.funk1@gmail.com> Cc: Howard Chu <howardchu95@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jan Polensky <japo@linux.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Li Huafei <lihuafei1@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Nam Cao <namcao@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steinar H. Gunderson <sesse@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20250821163820.1132977-5-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 3c723f449723 ("perf test: Fix lock contention test") Signed-off-by: Sasha Levin <sashal@kernel.org>
This is one more remnant of the BUILD_NONDISTRO series to make building
with binutils-devel opt-in due to license incompatibility.
In this case just the references at link time were still in place, which
make building the test-all.bin file fail, which wasn't detected before
probably because the last test was done with binutils-devel available,
doh.
Now:
$ rpm -q binutils-devel
package binutils-devel is not installed
$ file /tmp/build/perf-tools/feature/test-all.bin
/tmp/build/perf-tools/feature/test-all.bin: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=4b5388a346b51f1b993f0b0dbd49f4570769b03c, for GNU/Linux 3.2.0, not stripped
$
Fixes: 970ae86307718c34 ("perf build: The bfd features are opt-in, stop testing for them by default") Reviewed-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: James Clark <james.clark@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
With commit f0d0f978f3f5830a ("perf header: Don't write empty BPF/BTF
info"), the write_bpf_( prog_info() | btf() ) functions exit without
writing anything if env->bpf_prog.(infos| btfs)_cnt is zero.
process_bpf_( prog_info() | btf() ), however, still expect a "count"
value to exist in the data file. If btf information is empty, for
example, process_bpf_btf will read garbage or some other data as the
number of btf nodes in the data file. As a result, the data file will
not be processed correctly.
Instead, write the count to the data file and exit if it is zero.
Fixes: f0d0f978f3f5830a ("perf header: Don't write empty BPF/BTF info") Reviewed-by: Ian Rogers <irogers@google.com> Signed-off-by: Thomas Falcon <thomas.falcon@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
grab_requested_mnt_ns was changed to return error codes on failure, but
its callers were not updated to check for error pointers, still checking
only for a NULL return value.
This commit updates the callers to use IS_ERR() or IS_ERR_OR_NULL() and
PTR_ERR() to correctly check for and propagate errors.
This also makes sure that the logic actually works and mount namespace
file descriptors can be used to refere to mounts.
Christian Brauner <brauner@kernel.org> says:
Rework the patch to be more ergonomic and in line with our overall error
handling patterns.
Fixes: 7b9d14af8777 ("fs: allow mount namespace fd") Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Andrei Vagin <avagin@google.com> Link: https://patch.msgid.link/20251111062815.2546189-1-avagin@google.com Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
bm_register_write() opens an executable file using open_exec(), which
internally calls do_open_execat() and denies write access on the file to
avoid modification while it is being executed.
However, when an error occurs, bm_register_write() closes the file using
filp_close() directly. This does not restore the write permission, which
may cause subsequent write operations on the same file to fail.
Fix this by calling exe_file_allow_write_access() before filp_close() to
restore the write permission properly.
Fixes: e7850f4d844e ("binfmt_misc: fix possible deadlock in bm_register_write") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Link: https://patch.msgid.link/20251105022923.1813587-1-zilin@seu.edu.cn Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In virtio_fs_add_queues_sysfs(), the code incorrectly checks fs->mqs_kobj
after calling kobject_create_and_add(). Change the check to fsvq->kobj
(fs->mqs_kobj -> fsvq->kobj) to ensure the per-queue kobject is
successfully created.
Fixes: 87cbdc396a31 ("virtio_fs: add sysfs entries for queue information") Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com> Link: https://patch.msgid.link/20251027104658.1668537-1-alok.a.tiwari@oracle.com Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This was supposed to pass "onenand" instead of "&onenand" with the
ampersand. Passing a random stack address which will be gone when the
function ends makes no sense. However the good thing is that the pointer
is never used, so this doesn't cause a problem at run time.
When a process tries to access an entry in /afs, normally what happens is
that an automount dentry is created by ->lookup() and then triggered, which
jumps through the ->d_automount() op. Currently, afs_dynroot_lookup() does
not do cell DNS lookup, leaving that to afs_d_automount() to perform -
however, it is possible to use access() or stat() on the automount point,
which will always return successfully, have briefly created an afs_cell
record if one did not already exist.
This means that something like:
test -d "/afs/.west" && echo Directory exists
will print "Directory exists" even though no such cell is configured. This
breaks the "west" python module available on PIP as it expects this access
to fail.
Now, it could be possible to make afs_dynroot_lookup() perform the DNS[*]
lookup, but that would make "ls --color /afs" do this for each cell in /afs
that is listed but not yet probed. kafs-client, probably wrongly, preloads
the entire cell database and all the known cells are then listed in /afs -
and doing ls /afs would be very, very slow, especially if any cell supplied
addresses but was wholly inaccessible.
[*] When I say "DNS", actually read getaddrinfo(), which could use any one
of a host of mechanisms. Could also use static configuration.
To fix this, make the following changes:
(1) Create an enum to specify the origination point of a call to
afs_lookup_cell() and pass this value into that function in place of
the "excl" parameter (which can be derived from it). There are six
points of origination:
- Cell preload through /proc/net/afs/cells
- Root cell config through /proc/net/afs/rootcell
- Lookup in dynamic root
- Automount trigger
- Direct mount with mount() syscall
- Alias check where YFS tells us the cell name is different
(2) Add an extra state into the afs_cell state machine to indicate a cell
that's been initialised, but not yet looked up. This is separate from
one that can be considered active and has been looked up at least
once.
(3) Make afs_lookup_cell() vary its behaviour more, depending on where it
was called from:
If called from preload or root cell config, DNS lookup will not happen
until we definitely want to use the cell (dynroot mount, automount,
direct mount or alias check). The cell will appear in /afs but stat()
won't trigger DNS lookup.
If the cell already exists, dynroot will not wait for the DNS lookup
to complete. If the cell did not already exist, dynroot will wait.
If called from automount, direct mount or alias check, it will wait
for the DNS lookup to complete.
(4) Make afs_lookup_cell() return an error if lookup failed in one way or
another. We try to return -ENOENT if the DNS says the cell does not
exist and -EDESTADDRREQ if we couldn't access the DNS.
Reported-by: Markus Suvanto <markus.suvanto@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220685 Signed-off-by: David Howells <dhowells@redhat.com> Link: https://patch.msgid.link/1784747.1761158912@warthog.procyon.org.uk Fixes: 1d0b929fc070 ("afs: Change dynroot to create contents on demand") Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the old mount proceedure, hostfs could only pass root directory during
boot. This is because it constructed the root directory using the @root_ino
event without any mount options. However, when using it with the new mount
API, this step is no longer triggered. As a result, if users mounts without
specifying any mount options, the @host_root_path remains uninitialized. To
prevent this issue, the @host_root_path should be initialized at the time
of allocation.
Reported-by: Geoffrey Thorpe <geoff@geoffthorpe.net> Closes: https://lore.kernel.org/all/643333a0-f434-42fb-82ac-d25a0b56f3b7@geoffthorpe.net/ Fixes: cd140ce9f611 ("hostfs: convert hostfs to use the new mount API") Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Link: https://patch.msgid.link/20251011092235.29880-1-lihongbo22@huawei.com Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On big endian arm kernels, the arm optimized Curve25519 code produces
incorrect outputs and fails the Curve25519 test. This has been true
ever since this code was added.
It seems that hardly anyone (or even no one?) actually uses big endian
arm kernels. But as long as they're ostensibly supported, we should
disable this code on them so that it's not accidentally used.
Note: for future-proofing, use !CPU_BIG_ENDIAN instead of
CPU_LITTLE_ENDIAN. Both of these are arch-specific options that could
get removed in the future if big endian support gets dropped.
When posix timer creation is set to allocate a given timer ID and the
access to the user space value faults, the function terminates without
freeing the already allocated posix timer structure.
Move the allocation after the user space access to cure that.
[ tglx: Massaged change log ]
Fixes: ec2d0c04624b3 ("posix-timers: Provide a mechanism to allocate a given timer ID") Reported-by: syzbot+9c47ad18f978d4394986@syzkaller.appspotmail.com Suggested-by: Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: Eslam Khafagy <eslam.medhat1993@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Frederic Weisbecker <frederic@kernel.org> Link: https://patch.msgid.link/20251114122739.994326-1-eslam.medhat1993@gmail.com Closes: https://lore.kernel.org/all/69155df4.a70a0220.3124cb.0017.GAE@google.com/T/ Signed-off-by: Sasha Levin <sashal@kernel.org>
The irq_domain_free_irqs() helper requires that the irq_domain_ops->free
callback is implemented. Otherwise, the kernel reports the warning message
"NULL pointer, cannot free irq" when irq_dispose_mapping() is invoked to
release the per-HART local interrupts.
Set irq_domain_ops->free to irq_domain_free_irqs_top() to cure that.
Where prev_st is an ancestor of the queued_st in the explored states
tree. This ancestor is not guaranteed to have same allocated stack
depth as queued_st. E.g. in the following case:
def main():
for i in 1..2:
foo(i) // same callsite, differnt param
def foo(i):
if i == 1:
use 128 bytes of stack
iterator based loop
Here, for a second 'foo' call prev_st->allocated_stack is 128,
while queued_st->allocated_stack is much smaller.
widen_imprecise_scalars() needs to take this into account and avoid
accessing bpf_verifier_state->frame[*]->stack out of bounds.
Fixes: 2793a8b015f7 ("bpf: exact states comparison for iterator convergence checks") Reported-by: Emil Tsalapatis <emil@etsalapatis.com> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20251114025730.772723-1-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
syzbot found that cls_bpf_classify() is able to change
tc_skb_cb(skb)->drop_reason triggering a warning in sk_skb_reason_drop().
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 __sk_skb_reason_drop net/core/skbuff.c:1189 [inline]
WARNING: CPU: 0 PID: 5965 at net/core/skbuff.c:1192 sk_skb_reason_drop+0x76/0x170 net/core/skbuff.c:1214
struct tc_skb_cb has been added in commit ec624fe740b4 ("net/sched:
Extend qdisc control block with tc control block"), which added a wrong
interaction with db58ba459202 ("bpf: wire in data and data_end for
cls_act_bpf").
drop_reason was added later.
Add bpf_prog_run_data_pointers() helper to save/restore the net_sched
storage colliding with BPF data_meta/data_end.
Fixes: ec624fe740b4 ("net/sched: Extend qdisc control block with tc control block") Reported-by: syzbot <syzkaller@googlegroups.com> Closes: https://lore.kernel.org/netdev/6913437c.a70a0220.22f260.013b.GAE@google.com/ Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20251112125516.1563021-1-edumazet@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The MODULE_PARM_DESC string for the "active" parameter is missing a
space and has an extraneous trailing ']' character. Correct these.
Before patch:
$ modinfo -p ./drm_client_lib.ko
active:Choose which drm client to start, default isfbdev] (string)
After patch:
$ modinfo -p ./drm_client_lib.ko
active:Choose which drm client to start, default is fbdev (string)
Fixes: f7b42442c4ac ("drm/log: Introduce a new boot logger to draw the kmsg on the screen") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20251112010920.2355712-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
rsnd_ssiu_probe() leaks an OF node reference obtained by
rsnd_ssiu_of_node(). The node reference is acquired but
never released across all return paths.
Fix it by declaring the device node with the __free(device_node)
cleanup construct to ensure automatic release when the variable goes
out of scope.
The following lockdep splat was observed while kernel auto-online a CXL
memory region:
======================================================
WARNING: possible circular locking dependency detected
6.17.0djtest+ #53 Tainted: G W
------------------------------------------------------
systemd-udevd/3334 is trying to acquire lock: ffffffff90346188 (hmem_resource_lock){+.+.}-{4:4}, at: hmem_register_resource+0x31/0x50
but task is already holding lock: ffffffff90338890 ((node_chain).rwsem){++++}-{4:4}, at: blocking_notifier_call_chain+0x2e/0x70
which lock already depends on the new lock.
[..]
Chain exists of:
hmem_resource_lock --> mem_hotplug_lock --> (node_chain).rwsem
The lock ordering can cause potential deadlock. There are instances
where hmem_resource_lock is taken after (node_chain).rwsem, and vice
versa.
Split out the target update section of hmat_register_target() so that
hmat_callback() only envokes that section instead of attempt to register
hmem devices that it does not need to.
[ dj: Fix up comment to be closer to 80cols. (Jonathan) ]
Fixes: cf8741ac57ed ("ACPI: NUMA: HMAT: Register "soft reserved" memory as an "hmem" device") Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Tested-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Reviewed-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Link: https://patch.msgid.link/20251105235115.85062-3-dave.jiang@intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the BO pointer provided to amdgpu_bo_create_kernel() points to
non-NULL, amdgpu_bo_create_kernel() takes it as a hint to pin that address
rather than allocate a new BO.
This functionality is never desired for allocating ISP buffers. A new BO
should always be created when isp_kernel_buffer_alloc() is called, per the
description for isp_kernel_buffer_alloc().
Ensure this by zeroing *bo right before the amdgpu_bo_create_kernel() call.
Fixes: 55d42f616976 ("drm/amd/amdgpu: Add helper functions for isp buffers") Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com> Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 73c8c29baac7f0c7e703d92eba009008cbb5228e) Signed-off-by: Sasha Levin <sashal@kernel.org>
In snd_usb_create_streams(), for UAC version 3 devices, the Interface
Association Descriptor (IAD) is retrieved via usb_ifnum_to_if(). If this
call fails, a fallback routine attempts to obtain the IAD from the next
interface and sets a BADD profile. However, snd_usb_mixer_controls_badd()
assumes that the IAD retrieved from usb_ifnum_to_if() is always valid,
without performing a NULL check. This can lead to a NULL pointer
dereference when usb_ifnum_to_if() fails to find the interface descriptor.
This patch adds a NULL pointer check after calling usb_ifnum_to_if() in
snd_usb_mixer_controls_badd() to prevent the dereference.
This issue was discovered by syzkaller, which triggered the bug by sending
a crafted USB device descriptor.
The utimes01 and utime06 tests fail when delegated timestamps are
enabled, specifically in subtests that modify the atime and mtime
fields using the 'nobody' user ID.
This issue occurs because nfs_setattr does not verify the inode's
UID against the caller's fsuid when delegated timestamps are
permitted for the inode.
This patch adds the UID check and if it does not match then the
request is sent to the server for permission checking.
Fixes: e12912d94137 ("NFSv4: Add support for delegated atime and mtime attributes") Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Smatch static checker noted that in _nfs4_proc_lookupp(), the flag
RPC_TASK_TIMEOUT is being passed as an argument to nfs4_init_sequence(),
which is clearly incorrect.
Since LOOKUPP is an idempotent operation, nfs4_init_sequence() should
not ask the server to cache the result. The RPC_TASK_TIMEOUT flag needs
to be passed down to the RPC layer.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Fixes: 76998ebb9158 ("NFSv4: Observe the NFS_MOUNT_SOFTREVAL flag in _nfs4_proc_lookupp") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If adding the second kobject fails, drop both references to avoid sysfs
residue and memory leak.
Fixes: e96f9268eea6 ("NFS: Make all of /sys/fs/nfs network-namespace unique") Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn> Reviewed-by: Benjamin Coddington <ben.coddington@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When nfs_do_create() returns an EEXIST error, it means that a regular
file could not be created. That could mean that a symlink needs to be
resolved. If that's the case, a lookup needs to be kicked off.
Reported-by: Stephen Abbene <sabbene87@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=220710 Fixes: 7c6c5249f061 ("NFS: add atomic_open for NFSv3 to handle O_TRUNC correctly.") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the TLS security policy is of type RPC_XPRTSEC_TLS_X509, then the
cert_serial and privkey_serial fields need to match as well since they
define the client's identity, as presented to the server.
Fixes: 90c9550a8d65 ("NFS: support the kernel keyring for TLS") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The default setting for the transport security policy must be
RPC_XPRTSEC_NONE, when using a TCP or RDMA connection without TLS.
Conversely, when using TLS, the security policy needs to be set.
Fixes: 6c0a8c5fcf71 ("NFS: Have struct nfs_client carry a TLS policy field") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The shmem layer zeroes out the new pages using cached mappings, and if
we don't CPU-flush we might leave dirty cachelines behind, leading to
potential data leaks and/or asynchronous buffer corruption when dirty
cachelines are evicted.
Fixes: 8a1cc07578bf ("drm/panthor: Add GEM logical block") Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patch.msgid.link/20251107171214.1186299-1-boris.brezillon@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In the commit referenced by the Fixes tag, clk_hw_get_clk()
was added in va_macro_probe() to get the fsgen clock,
but forgot to add the corresponding clk_put() in va_macro_remove().
This leads to a clock reference leak when the driver is unloaded.
Switch to devm_clk_hw_get_clk() to automatically manage the
clock resource.
Fixes: 30097967e056 ("ASoC: codecs: va-macro: use fsgen as clock") Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://patch.msgid.link/20251106143114.729-1-vulab@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The probe function enables regulators at the beginning
but fails to disable them in its error handling path.
If any operation after enabling the regulators fails,
the probe will exit with an error, leaving the regulators
permanently enabled, which could lead to a resource leak.
Add a proper error handling path to call regulator_bulk_disable()
before returning an error.
Fixes: 9a397f473657 ("ASoC: cs4271: add regulator consumer support") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20251105062246.1955-1-vulab@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the commit referenced by the Fixes tag,
devm_gpiod_get_optional() was replaced by manual
GPIO management, relying on the regulator core to release the
GPIO descriptor. However, this approach does not account for the
error path: when regulator registration fails, the core never
takes over the GPIO, resulting in a resource leak.
Add gpiod_put() before returning on regulator registration failure.
Fixes: 5e6f3ae5c13b ("regulator: fixed: Let core handle GPIO descriptor") Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn> Link: https://patch.msgid.link/20251028172828.625-1-vulab@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The Generic Initiator Affinity Structure in SRAT table uses device
handle type field to indicate the device type. According to ACPI
specification, the device handle type value of 1 represents PCI device,
not 0.
Fixes: 894c26a1c274 ("ACPI: Support Generic Initiator only domains") Reported-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com> Link: https://patch.msgid.link/20250913023224.39281-1-xueshuai@linux.alibaba.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
io_buffer_register_bvec() currently uses blk_rq_nr_phys_segments() as
the number of bvecs in the request. However, bvecs may be split into
multiple segments depending on the queue limits. Thus, the number of
segments may overestimate the number of bvecs. For ublk devices, the
only current users of io_buffer_register_bvec(), virt_boundary_mask,
seg_boundary_mask, max_segments, and max_segment_size can all be set
arbitrarily by the ublk server process.
Set imu->nr_bvecs based on the number of bvecs the rq_for_each_bvec()
loop actually yields. However, continue using blk_rq_nr_phys_segments()
as an upper bound on the number of bvecs when allocating imu to avoid
needing to iterate the bvecs a second time.
Link: https://lore.kernel.org/io-uring/20251111191530.1268875-1-csander@purestorage.com/ Signed-off-by: Caleb Sander Mateos <csander@purestorage.com> Fixes: 27cb27b6d5ea ("io_uring: add support for kernel registered bvecs") Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sequence adjustment may be required for FTP traffic with PASV/EPSV modes.
due to need to re-write packet payload (IP, port) on the ftp control
connection. This can require changes to the TCP length and expected
seq / ack_seq.
The easiest way to reproduce this issue is with PASV mode.
Example ruleset:
table inet ftp_nat {
ct helper ftp_helper {
type "ftp" protocol tcp
l3proto inet
}
chain prerouting {
type filter hook prerouting priority 0; policy accept;
tcp dport 21 ct state new ct helper set "ftp_helper"
}
}
table ip nat {
chain prerouting {
type nat hook prerouting priority -100; policy accept;
tcp dport 21 dnat ip prefix to ip daddr map {
192.168.100.1 : 192.168.13.2/32 }
}
chain postrouting {
type nat hook postrouting priority 100 ; policy accept;
tcp sport 21 snat ip prefix to ip saddr map {
192.168.13.2 : 192.168.100.1/32 }
}
}
Note that the ftp helper gets assigned *after* the dnat setup.
The inverse (nat after helper assign) is handled by an existing
check in nf_nat_setup_info() and will not show the problem.
ftp nat changes do not work as expected in this case:
Connected to 192.168.100.1.
[..]
ftp> epsv
EPSV/EPRT on IPv4 off.
ftp> ls
227 Entering passive mode (192,168,100,1,209,129).
421 Service not available, remote server has closed connection.
l2cap_chan_put() is exported, so export also l2cap_chan_hold() for
modules.
l2cap_chan_hold() has use case in net/bluetooth/6lowpan.c
Signed-off-by: Pauli Virtanen <pav@iki.fi> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit ac4e04d9e378 ("cpufreq: intel_pstate: Unchecked MSR aceess in
legacy mode") introduced a check for feature X86_FEATURE_IDA to verify
turbo mode support. Although this is the correct way to check for turbo
mode support, it causes issues on some platforms that disable turbo
during OS boot, but enable it later [1]. Before adding this feature
check, users were able to get turbo mode frequencies by writing 0 to
/sys/devices/system/cpu/intel_pstate/no_turbo post-boot.
To restore the old behavior on the affected systems while still
addressing the unchecked MSR issue on some Skylake-X systems, check
X86_FEATURE_IDA only immediately before updates of MSR_IA32_PERF_CTL
that may involve setting the Turbo Engage Bit (bit 32).
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPU via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function cppc_perf_ctrs_in_pcc() checks if the CPPC
perf-ctrs are in a PCC region for all the present CPUs, which breaks
when the kernel is booted with "nosmt=force".
Hence, limit the check only to the online CPUs.
Fixes: ae2df912d1a5 ("ACPI: CPPC: Disable FIE if registers in PCC regions") Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org> Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://patch.msgid.link/20251107074145.2340-5-gautham.shenoy@amd.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function cppc_allow_fast_switch() checks for the validity
of the _CPC object for all the present CPUs. This breaks when the
kernel is booted with "nosmt=force".
Check fast_switch capability only on online CPUs
Fixes: 15eece6c5b05 ("ACPI: CPPC: Fix NULL pointer dereference when nosmp is used") Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org> Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://patch.msgid.link/20251107074145.2340-4-gautham.shenoy@amd.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
per_cpu(cpc_desc_ptr, cpu) object is initialized for only the online
CPUs via acpi_soft_cpu_online() --> __acpi_processor_start() -->
acpi_cppc_processor_probe().
However the function acpi_cpc_valid() checks for the validity of the
_CPC object for all the present CPUs. This breaks when the kernel is
booted with "nosmt=force".
Hence check the validity of the _CPC objects of only the online CPUs.
Fixes: 2aeca6bd0277 ("ACPI: CPPC: Check present CPUs for determining _CPC is valid") Reported-by: Christopher Harris <chris.harris79@gmail.com> Closes: https://lore.kernel.org/lkml/CAM+eXpdDT7KjLV0AxEwOLkSJ2QtrsvGvjA2cCHvt1d0k2_C4Cw@mail.gmail.com/ Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org> Tested-by: Chrisopher Harris <chris.harris79@gmail.com> Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://patch.msgid.link/20251107074145.2340-3-gautham.shenoy@amd.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 279f838a61f9 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") introduced the ability to detect the
preferred core on AMD platforms by checking if there at least two
distinct highest_perf values.
However, it uses for_each_present_cpu() to iterate through all the
CPUs in the platform, which is problematic when the kernel is booted
with "nosmt=force" commandline option.
Hence limit the search to only the online CPUs.
Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()") Reported-by: Christopher Harris <chris.harris79@gmail.com> Closes: https://lore.kernel.org/lkml/CAM+eXpdDT7KjLV0AxEwOLkSJ2QtrsvGvjA2cCHvt1d0k2_C4Cw@mail.gmail.com/ Reviewed-by: "Mario Limonciello (AMD) (kernel.org)" <superm1@kernel.org> Tested-by: Chrisopher Harris <chris.harris79@gmail.com> Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com> Link: https://patch.msgid.link/20251107074145.2340-2-gautham.shenoy@amd.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
For HSRv0, the path_id has the following meaning:
- 0000: PRP supervision frame
- 0001-1001: HSR ring identifier
- 1010-1011: Frames from PRP network (A/B, with RedBoxes)
- 1111: HSR supervision frame
Follow the IEC 62439-3:2010 standard more closely by setting the right
path_id for HSRv0 supervision frames (actually, it is correctly set when
the frame is constructed, but hsr_set_path_id() overwrites it) and set a
fixed HSR ring identifier of 1. The ring identifier seems to be generally
unused and we ignore it anyways on reception, but some fixed identifier is
definitely better than using one identifier in one direction and a wrong
identifier in the other.
This was also the behavior before commit f266a683a480 ("net/hsr: Better
frame dispatch") which introduced the alternating path_id. This was later
moved to hsr_set_path_id() in commit 451d8123f897 ("net: prp: add packet
handling support").
The IEC 62439-3:2010 also contains 6 unused bytes after the MacAddressA in
the HSRv0 supervision frames. Adjust a TODO comment accordingly.
Fixes: f266a683a480 ("net/hsr: Better frame dispatch") Fixes: 451d8123f897 ("net: prp: add packet handling support") Signed-off-by: Felix Maurer <fmaurer@redhat.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/ea0d5133cd593856b2fa673d6e2067bf1d4d1794.1762876095.git.fmaurer@redhat.com Tested-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On HSRv0, no supervision frames were sent. The supervison frames were
generated successfully, but failed the check for a sufficiently long mac
header, i.e., at least sizeof(struct hsr_ethhdr), in hsr_fill_frame_info()
because the mac header only contained the ethernet header.
Fix this by including the HSR header in the mac header when generating HSR
supervision frames. Note that the mac header now also includes the TLV
fields. This matches how we set the headers on rx and also the size of
struct hsrv0_ethhdr_sp.
Reported-by: Hangbin Liu <liuhangbin@gmail.com> Closes: https://lore.kernel.org/netdev/aMONxDXkzBZZRfE5@fedora/ Fixes: 9cfb5e7f0ded ("net: hsr: fix hsr_init_sk() vs network/transport headers.") Signed-off-by: Felix Maurer <fmaurer@redhat.com> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://patch.msgid.link/4354114fea9a642fe71f49aeeb6c6159d1d61840.1762876095.git.fmaurer@redhat.com Tested-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The purpose of commit 703eec1b2422 ("virtio_net: fixing XDP for fully
checksummed packets handling") is to record the flags in advance, as
their value may be overwritten in the XDP case. However, the flags
recorded under big mode are incorrect, because in big mode, the passed
buf does not point to the rx buffer, but rather to the page of the
submitted buffer. This commit fixes this issue.
For the small mode, the commit c11a49d58ad2 ("virtio_net: Fix mismatched
buf address when unmapping for small packets") fixed it.
Tested-by: Alyssa Ross <hi@alyssa.is> Fixes: 703eec1b2422 ("virtio_net: fixing XDP for fully checksummed packets handling") Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://patch.msgid.link/20251111090828.23186-1-xuanzhuo@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
One of the factors of a link's grade is the channel load, which is
calculated from the AP's bss load element.
The current code takes this element from the beacon for an active link,
and from bss->ies for an inactive link.
bss->ies is set to either the beacon's ies or to the probe response
ones, with preference to the probe response (meaning that if there was
even one probe response, the ies of it will be stored in bss->ies and
won't be overiden by the beacon ies).
The probe response can be very old, i.e. from the connection time,
where a beacon is updated before each link selection (which is
triggered only after a passive scan).
In such case, the bss load element in the probe response will not
include the channel load caused by the STA, where the beacon will.
This will cause the inactive link to always have a lower channel
load, and therefore an higher grade than the active link's one.
This causes repeated link switches, causing the throughput to drop.
Fix this by always taking the ies from the beacon, as those are for
sure new.
During the development of the rate changes, I evidently made
some changes that shouldn't have been there; beacon templates
with rate_n_flags are only in old versions, so no changes to
them should have been necessary, and evidently broke on some
devices. This also would have broken fixed (injection) rates,
it would seem. Restore the old handling of this.
1) Large batches hold one victim cpu for a very long time.
2) Driver often hit their own TX ring limit (all slots are used).
3) We call dev_requeue_skb()
4) Requeues are using a FIFO (q->gso_skb), breaking qdisc ability to
implement FQ or priority scheduling.
5) dequeue_skb() gets packets from q->gso_skb one skb at a time
with no xmit_more support. This is causing many spinlock games
between the qdisc and the device driver.
Requeues were supposed to be very rare, lets keep them this way.
Limit batch sizes to /proc/sys/net/core/dev_weight (default 64) as
__qdisc_run() was designed to use.
Fixes: 5772e9a3463b ("qdisc: bulk dequeue support for qdiscs with TCQ_F_ONETXQUEUE") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Jesper Dangaard Brouer <hawk@kernel.org> Link: https://patch.msgid.link/20251109161215.2574081-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, CQs without a completion function are assigned the
mlx5_add_cq_to_tasklet function by default. This is problematic since
only user CQs created through the mlx5_ib driver are intended to use
this function.
Additionally, all CQs that will use doorbells instead of polling for
completions must call mlx5_cq_arm. However, the default CQ creation flow
leaves a valid value in the CQ's arm_db field, allowing FW to send
interrupts to polling-only CQs in certain corner cases.
These two factors would allow a polling-only kernel CQ to be triggered
by an EQ interrupt and call a completion function intended only for user
CQs, causing a null pointer exception.
Some areas in the driver have prevented this issue with one-off fixes
but did not address the root cause.
This patch fixes the described issue by adding defaults to the create CQ
flow. It adds a default dummy completion function to protect against
null pointer exceptions, and it sets an invalid command sequence number
by default in kernel CQs to prevent the FW from sending an interrupt to
the CQ until it is armed. User CQs are responsible for their own
initialization values.
Callers of mlx5_core_create_cq are responsible for changing the
completion function and arming the CQ per their needs.
Fixes: cdd04f4d4d71 ("net/mlx5: Add support to create SQ and CQ for ASO") Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Acked-by: Leon Romanovsky <leon@kernel.org> Link: https://patch.msgid.link/1762681743-1084694-1-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Completion queues (CQs) in mlx5 use the same global doorbell, which may
become contended when accessed concurrently from many cores.
This patch prepares the CQ management code for supporting different
doorbells per CQ. This will be used in downstream patches to allow
separate doorbells to be used by channels CQs.
The main change is moving the 'uar' pointer from struct mlx5_core_cq to
struct mlx5e_cq, as the uar page to be used is better off stored
directly there. Other users of mlx5_core_cq also store the UAR to be
used separately and therefore the pointer being removed is dead weight
for them. As evidence, in this patch there are two users which set the
mcq.uar pointer but didn't use it, Software Steering and old Innova CQ
creation code. Instead, they rang the doorbell directly from another
pointer.
The 'uar' pointer added to struct mlx5e_cq remains in a hot cacheline
(as before), because it may get accessed for each packet.
The global doorbell is used for more than just Ethernet resources, so
move it out of mlx5e_hw_objs into a common place (mlx5_priv), to avoid
non-Ethernet modules (e.g. HWS, ASO) depending on Ethernet structs.
Use this opportunity to consolidate it with the 'uar' pointer already
there, which was used as an RX doorbell. Underneath the 'uar' pointer is
identical to 'bfreg->up', so store a single resource and use that
instead.
For CQ doorbells, care is taken to always use bfreg->up->index instead
of bfreg->index, which may refer to a subsequent UAR page from the same
ALLOC_UAR batch on some NICs.
This paves the way for cleanly supporting multiple doorbells in the
Ethernet driver.
The previous calculation used roundup() which caused an overflow for
rates between 25.5Gbps and 26Gbps.
For example, a rate of 25.6Gbps would result in using 100Mbps units with
value of 256, which would overflow the 8 bits field.
Simplify the upper_limit_mbps calculation by removing the
unnecessary roundup, and adjust the comparison to use <= to correctly
handle the boundary condition.
Fixes: d8880795dabf ("net/mlx5e: Implement DCBNL IEEE max rate") Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Nimrod Oren <noren@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1762681073-1084058-4-git-send-email-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fix a KMSAN kernel-infoleak detected by the syzbot .
[net?] KMSAN: kernel-infoleak in __skb_datagram_iter
In tcf_ife_dump(), the variable 'opt' was partially initialized using a
designatied initializer. While the padding bytes are reamined
uninitialized. nla_put() copies the entire structure into a
netlink message, these uninitialized bytes leaked to userspace.
Initialize the structure with memset before assigning its fields
to ensure all members and padding are cleared prior to beign copied.
This change silences the KMSAN report and prevents potential information
leaks from the kernel memory.
This fix has been tested and validated by syzbot. This patch closes the
bug reported at the following syzkaller link and ensures no infoleak.
Reported-by: syzbot+0c85cae3350b7d486aee@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0c85cae3350b7d486aee Tested-by: syzbot+0c85cae3350b7d486aee@syzkaller.appspotmail.com Fixes: ef6980b6becb ("introduce IFE action") Signed-off-by: Ranganath V N <vnranganath.20@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251109091336.9277-3-vnranganath.20@gmail.com Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In tcf_connmark_dump(), the variable 'opt' was partially initialized using a
designatied initializer. While the padding bytes are reamined
uninitialized. nla_put() copies the entire structure into a
netlink message, these uninitialized bytes leaked to userspace.
Initialize the structure with memset before assigning its fields
to ensure all members and padding are cleared prior to beign copied.
Reported-by: syzbot+0c85cae3350b7d486aee@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=0c85cae3350b7d486aee Tested-by: syzbot+0c85cae3350b7d486aee@syzkaller.appspotmail.com Fixes: 22a5dc0e5e3e ("net: sched: Introduce connmark action") Signed-off-by: Ranganath V N <vnranganath.20@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20251109091336.9277-2-vnranganath.20@gmail.com Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
This handles PA Sync Lost event which previously was assumed to be
handled with BIG Sync Lost but their lifetime are not the same thus why
there are 2 different events to inform when each sync is lost.
Fixes: b2a5f2e1c127 ("Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Once GC completes, unix_graph_grouped is set to true.
Also, unix_graph_maybe_cyclic is set to true due to sk-X's
cyclic self-reference, which makes close() trigger GC.
At 3-b, unix_add_edge() allocates unix_sk(sk-B)->vertex and
links it to unix_unvisited_vertices.
unix_update_graph() is called at 3-a. and 3-b., but neither
unix_graph_grouped nor unix_graph_maybe_cyclic is changed
because both sk-B's listener and sk-C are not in-flight.
3-c decrements sk-A's file refcnt to 1.
Since unix_graph_grouped is true at 3-d, unix_walk_scc_fast()
is finally called and iterates 3 sockets sk-A, sk-B, and sk-X:
sk-A -> sk-B (-> sk-C)
sk-X -> sk-X
This is totally fine. All of them are not yet close()d and
should be grouped into different SCCs.
However, unix_vertex_dead() misjudges that sk-A and sk-B are
in the same SCC and sk-A is dead.
unix_sk(sk-A)->scc_index == unix_sk(sk-B)->scc_index <-- Wrong!
&&
sk-A's file refcnt == unix_sk(sk-A)->vertex->out_degree
^-- 1 in-flight count for sk-B
-> sk-A is dead !?
The problem is that unix_add_edge() does not initialise scc_index.
Stage 1) is used for heap spraying, making a newly allocated
vertex have vertex->scc_index == 2 (UNIX_VERTEX_INDEX_START)
set by unix_walk_scc() at 1-c.
Let's track the max SCC index from the previous unix_walk_scc()
call and assign the max + 1 to a new vertex's scc_index.
This way, we can continue to avoid Tarjan's algorithm while
preventing misjudgments.
Fixes: ad081928a8b0 ("af_unix: Avoid Tarjan's algorithm if unnecessary.") Reported-by: Quang Le <quanglex97@gmail.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Link: https://patch.msgid.link/20251109025233.3659187-1-kuniyu@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If for example the sniffer did not follow any AIDs in an MU frame, then
some of the information may not be filled in or is even expected to be
invalid. As an example, in that case it is expected that Nss is zero.
Fix a possible leak in mdiobus_register_device() when both a
reset-gpio and a reset-controller are present.
Clean up the already claimed reset-gpio, when the registration of
the reset-controller fails, so when an error code is returned, the
device retains its state before the registration attempt.
syzbot reported use-after-free of tipc_net(net)->monitors[]
in tipc_mon_reinit_self(). [0]
The array is protected by RTNL, but tipc_mon_reinit_self()
iterates over it without RTNL.
tipc_mon_reinit_self() is called from tipc_net_finalize(),
which is always under RTNL except for tipc_net_finalize_work().
Let's hold RTNL in tipc_net_finalize_work().
[0]:
BUG: KASAN: slab-use-after-free in __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
BUG: KASAN: slab-use-after-free in _raw_spin_lock_irqsave+0xa7/0xf0 kernel/locking/spinlock.c:162
Read of size 1 at addr ffff88805eae1030 by task kworker/0:7/5989
The am65_cpsw_iet_verify_wait() function attempts verification 20 times,
toggling the AM65_CPSW_PN_IET_MAC_LINKFAIL bit in each iteration. When
the LINKFAIL bit transitions from 1 to 0, the MAC merge layer initiates
the verification process and waits for the timeout configured in
MAC_VERIFY_CNT before automatically retransmitting. The MAC_VERIFY_CNT
register is configured according to the user-defined verify/response
timeout in am65_cpsw_iet_set_verify_timeout_count(). As per IEEE 802.3
Clause 99, the hardware performs this automatic retry up to 3 times.
Current implementation toggles LINKFAIL after the user-configured
verify/response timeout in each iteration, forcing the hardware to
restart verification instead of respecting the MAC_VERIFY_CNT timeout.
This bypasses the hardware's automatic retry mechanism.
Fix this by moving the LINKFAIL bit toggle outside the retry loop and
reducing the retry count from 20 to 3. The software now only monitors
the status register while the hardware autonomously handles the 3
verification attempts at proper MAC_VERIFY_CNT intervals.
The CPSW module uses the MAC_VERIFY_CNT bit field in the
CPSW_PN_IET_VERIFY_REG_k register to set the verify/response timeout
count. This register specifies the number of clock cycles to wait before
resending a verify packet if the verification fails.
The verify/response timeout count, as being set by the function
am65_cpsw_iet_set_verify_timeout_count() is hardcoded for 125MHz
clock frequency, which varies based on PHY mode and link speed.
In tls_handshake_accept(), a netlink message is allocated using
genlmsg_new(). In the error handling path, genlmsg_cancel() is called
to cancel the message construction, but the message itself is not freed.
This leads to a memory leak.
Fix this by calling nlmsg_free() in the error path after genlmsg_cancel()
to release the allocated memory.
Fixes: 2fd5532044a89 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake") Signed-off-by: Zilin Guan <zilin@seu.edu.cn> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Link: https://patch.msgid.link/20251106144511.3859535-1-zilin@seu.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The current CLC proposal message construction uses a mix of
`ini->smc_type_v1/v2` and `pclc_base->hdr.typev1/v2` to decide whether
to include optional extensions (IPv6 prefix extension for v1, and v2
extension). This leads to a critical inconsistency: when
`smc_clc_prfx_set()` fails - for example, in IPv6-only environments with
only link-local addresses, or when the local IP address and the outgoing
interface’s network address are not in the same subnet.
As a result, the proposal message is assembled using the stale
`ini->smc_type_v1` value—causing the IPv6 prefix extension to be
included even though the header indicates v1 is not supported.
The peer then receives a malformed CLC proposal where the header type
does not match the payload, and immediately resets the connection.
The fix ensures consistency between the CLC header flags and the actual
payload by synchronizing `ini->smc_type_v1` with `pclc_base->hdr.typev1`
when prefix setup fails.
Fixes: 8c3dca341aea ("net/smc: build and send V2 CLC proposal") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://patch.msgid.link/20251107024029.88753-1-alibuda@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Broadcom switches locally terminate link local traffic and do not
forward it, so we should not mark it as offloaded.
In some situations we still want/need to flood this traffic, e.g. if STP
is disabled, or it is explicitly enabled via the group_fwd_mask. But if
the skb is marked as offloaded, the kernel will assume this was already
done in hardware, and the packets never reach other bridge ports.
So ensure that link local traffic is never marked as offloaded, so that
the kernel can forward/flood these packets in software if needed.
Since the local termination in not configurable, check the destination
MAC, and never mark packets as offloaded if it is a link local ether
address.
While modern switches set the tag reason code to BRCM_EG_RC_PROT_TERM
for trapped link local traffic, they also set it for link local traffic
that is flooded (01:80:c2:00:00:10 to 01:80:c2:00:00:2f), so we cannot
use it and need to look at the destination address for them as well.
Fixes: 964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags") Fixes: 0e62f543bed0 ("net: dsa: Fix duplicate frames flooded by learning") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20251109134635.243951-1-jonas.gorski@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Contrary to what was stated on d36349ea73d8 ("Bluetooth: hci_conn:
Fix running bis_cleanup for hci_conn->type PA_LINK") the PA_LINK does
in fact needs to run bis_cleanup in order to terminate the PA Sync,
since that is bond to the listening socket which is the entity that
controls the lifetime of PA Sync, so if it is closed/released the PA
Sync shall be terminated, terminating the PA Sync shall not result in
the BIG Sync being terminated since once the later is established it
doesn't depend on the former anymore.
If the use user wants to reconnect/rebind a number of BIS(s) it shall
keep the socket open until it no longer needs the PA Sync, which means
it retains full control of the lifetime of both PA and BIG Syncs.
Fixes: d36349ea73d8 ("Bluetooth: hci_conn: Fix running bis_cleanup for hci_conn->type PA_LINK") Fixes: a7bcffc673de ("Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
disconnect_all_peers() calls sleeping function (l2cap_chan_close) under
spinlock. Holding the lock doesn't actually do any good -- we work on a
local copy of the list, and the lock doesn't protect against peer->chan
having already been freed.
Fix by taking refcounts of peer->chan instead. Clean up the code and
old comments a bit.
Take devices_lock instead of RCU, because the kfree_rcu();
l2cap_chan_put(); construct in chan_close_cb() does not guarantee
peer->chan is necessarily valid in RCU.
Also take l2cap_chan_lock() which is required for l2cap_chan_close().
Log: (bluez 6lowpan-tester Client Connect - Disable)
------
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:575
...
<TASK>
...
l2cap_send_disconn_req (net/bluetooth/l2cap_core.c:938 net/bluetooth/l2cap_core.c:1495)
...
? __pfx_l2cap_chan_close (net/bluetooth/l2cap_core.c:809)
do_enable_set (net/bluetooth/6lowpan.c:1048 net/bluetooth/6lowpan.c:1068)
------
Fixes: 90305829635d ("Bluetooth: 6lowpan: Converting rwlocks to use RCU") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Bluetooth 6lowpan.c confuses BDADDR_LE and ADDR_LE_DEV address types,
e.g. debugfs "connect" command takes the former, and "disconnect" and
"connect" to already connected device take the latter. This is due to
using same value both for l2cap_chan_connect and hci_conn_hash_lookup_le
which take different dst_type values.
Fix address type passed to hci_conn_hash_lookup_le().
Retain the debugfs API difference between "connect" and "disconnect"
commands since it's been like this since 2015 and nobody apparently
complained.
Fixes: f5ad4ffceba0 ("Bluetooth: 6lowpan: Use hci_conn_hash_lookup_le() when possible") Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 18722c247023 ("Bluetooth: Enable 6LoWPAN support for BT LE devices") Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a KASAN: slab-use-after-free read in btusb_disconnect().
Calling "usb_driver_release_interface(&btusb_driver, data->intf)" will
free the btusb data associated with the interface. The same data is
then used later in the function, hence the UAF.
Fix by moving the accesses to btusb data to before the data is free'd.
The replay logic added by commit 9411b1d4c7df ("nfsd4: cleanup
handling of nfsv4.0 closed stateid's") cannot be done if encoding
failed due to a short send buffer; there's no guarantee that the
operation encoder has actually encoded the data that is being copied
to the replay cache.
Reported-by: rtm@csail.mit.edu Closes: https://lore.kernel.org/linux-nfs/c3628d57-94ae-48cf-8c9e-49087a28cec9@oracle.com/T/#t Fixes: 9411b1d4c7df ("nfsd4: cleanup handling of nfsv4.0 closed stateid's") Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: NeilBrown <neil@brown.name> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's used to work around an objtool issue since commit abb2a5572264
("LoongArch: Add cflag -fno-isolate-erroneous-paths-dereference"), but
it's then passed to bindgen and cause an error because Clang does not
have this option.
Fixes: abb2a5572264 ("LoongArch: Add cflag -fno-isolate-erroneous-paths-dereference") Acked-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Mingcong Bai <jeffbai@aosc.io> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Sasha Levin <sashal@kernel.org>
The lan8814 is a quad-phy and it is using QSGMII towards the MAC.
The problem is that everytime when one of the ports is configured then
the PCS is reseted for all the PHYs. Meaning that the other ports can
loose traffic until the link is establish again.
To fix this, do the reset one time for the entire PHY package.
Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Divya Koppera <Divya.Koppera@microchip.com > Link: https://patch.msgid.link/20251106090637.2030625-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The functions lan_*_page_reg gets as a second parameter the page
where the register is. In all the functions the page was hardcoded.
Replace the hardcoded values with defines to make it more clear
what are those parameters.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250818075121.1298170-4-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 96a9178a29a6 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface") Signed-off-by: Sasha Levin <sashal@kernel.org>
As the name suggests this function modifies the register in an
extended page. It has the same parameters as phy_modify_mmd.
This function was introduce because there are many places in the
code where the registers was read then the value was modified and
written back. So replace all this code with this function to make
it clear.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://patch.msgid.link/20250818075121.1298170-3-horatiu.vultur@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 96a9178a29a6 ("net: phy: micrel: lan8814 fix reset of the QSGMII interface") Signed-off-by: Sasha Levin <sashal@kernel.org>
Two additional bytes in front of each frame received into the RX FIFO if
SHIFT16 is set, so we need to subtract the extra two bytes from pkt_len
to correct the statistic of rx_bytes.
Fixes: 3ac72b7b63d5 ("net: fec: align IP header in hardware") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20251106021421.2096585-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It seems that most of the tests prepare the interfaces once before the test
run (setup_prepare()), rely on setup_wait() to wait for link and only then
run the test(s).
local_termination brings the physical interfaces down and up during test
run but never wait for them to come up. If the auto-negotiation takes
some seconds, first test packets are being lost, which leads to
false-negative test results.
Use setup_wait() in run_test() to make sure auto-negotiation has been
completed after all simple_if_init() calls on physical interfaces and test
packets will not be lost because of the race against link establishment.
Fixes: 90b9566aa5cd3f ("selftests: forwarding: add a test for local_termination.sh") Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Link: https://patch.msgid.link/20251106161213.459501-1-alexander.sverdlin@siemens.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When reporting tx completion using ieee80211_tx_status_xxx() family of
functions, the status part of the struct ieee80211_tx_info nested in the
skb is used to report things like transmit rates & retry count to mac80211
On the TX data path, this is correctly memset to 0 before calling
ieee80211_tx_status_ext(), but on the tx mgmt path this was not done.
This leads to mac80211 treating garbage values as valid transmit counters
(like tx retries for example) and accounting them as real statistics that
makes their way to userland via station dump.
The same issue was resolved in ath12k by commit 9903c0986f78 ("wifi:
ath12k: Add memset and update default rate value in wmi tx completion")
The widgets DMIC3_ENA and DMIC4_ENA must be defined in the DAPM
suppy widget, just like DMICL_ENA and DMICR_ENA. Whenever they
are turned on or off, the required startup or shutdown sequences
must be taken care by the max98090_shdn_event.
The Logitech G502 Hero Wireless's high resolution scrolling resets after
being unplugged without notifying the driver, causing extremely slow
scrolling.
The only indication of this is a battery update packet, so add a quirk to
detect when the device is unplugged and re-enable the scrolling.
There might be many reasons why a user is resizing a ring, e.g. moving
to huge pages or for some memory compaction using IORING_SETUP_NO_MMAP.
Don't bypass resizing, the user will definitely be surprised seeing 0
while the rings weren't actually moved to a new place.
We found an infinite loop bug in the exFAT file system that can lead to a
Denial-of-Service (DoS) condition. When a dentry in an exFAT filesystem is
malformed, the following system calls — SYS_openat, SYS_ftruncate, and
SYS_pwrite64 — can cause the kernel to hang.
Root cause analysis shows that the size validation code in exfat_find()
does not check whether dentry.stream.valid_size is negative. As a result,
the system calls mentioned above can succeed and eventually trigger the DoS
issue.
This patch adds a check for negative dentry.stream.valid_size to prevent
this vulnerability.
I noticed xfstests generic/193 and generic/355 started failing against
knfsd after commit e7a8ebc305f2 ("NFSD: Offer write delegation for OPEN
with OPEN4_SHARE_ACCESS_WRITE").
I ran those same tests against ONTAP (which has had write delegation
support for a lot longer than knfsd) and they fail there too... so
while it's a new failure against knfsd, it isn't an entirely new
failure.
Add the NFS_INO_REVAL_FORCED flag so that the presence of a delegation
doesn't keep the inode from being revalidated to fetch the updated mode.
Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / thirdparty / kernel / stable.git / log
