Daniel Golle [Fri, 29 Oct 2021 11:14:16 +0000 (12:14 +0100)]
rpcd: reload rpcd on installation of rpcd-mod-*
When installing additional rpcd modules, a restart of rpcd is required.
This often confuses users as even after installing rpcd-mod-rpcsys the
relevant ubus objects are still missing until rpcd has been reloaded
(or the system has been rebooted, obviously).
Let rpcd-mod-* reload rpcd as post-install action.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Mon, 8 Nov 2021 14:04:57 +0000 (15:04 +0100)]
qosify: update to the latest version
2ca7352543da map: make a helper function for freeing entries 411432ec853b map: add support for adding dns regex patterns 14803cb559d8 ubus: remove unused enum a0740172eda6 ubus: add api for providing dns lookup results for dns regex rules 406fbf478e87 ubus: add support for dynamically adding dns based rules 5fc91183d60a README: mention dns regex entries 3ed8c3eb1a3b README: document mapping file syntax 91ce2e77d302 map: introduce low effort codepoint from RFC8622 5ff14acca0e7 interface: enable NAT on interfaces by default e70f70e496d7 README: fix typo f25ded617478 README: fix another typo 675238bc2ce5 loader: always reinitialize programs 010eea0d98c3 map: improve timeout handling of IP entries 7ef54a7f04a0 map: add DF codepoint 6f7fbe698555 map: increase active timeout to 300 60e06a579a13 qosify-bpf: inline check_flow() to ensure that it is jited f5ae89e8d869 ubus: subscribe to dnsmasq.dns for dns lookup results
Stijn Tintel [Sun, 7 Nov 2021 16:33:35 +0000 (18:33 +0200)]
kernel: add another missing KASAN symbol
Enabling KERNEL_KASAN exposes yet another missing symbol. This did not
appear on bcm27xx but is appearing now on x86/64. Add a new kernel build
option for KASAN_VMALLOC to fix build on x86/64 with KERNEL_KASAN
enabled.
Stijn Tintel [Wed, 3 Nov 2021 17:38:50 +0000 (19:38 +0200)]
kernel: add missing UBSAN config symbols
Enabling KERNEL_UBSAN exposes several missing symbols. Add new kernel
build options for UBSAN_BOUNDS and UBSAN_TRAP, disable CONFIG_TEST_UBSAN
in the generic kernel configs and enable CONFIG_UBSAN_MISC in generic
5.10 config. The latter symbol was removed in later kernels, as it was
causing some issues, so just disable it in 5.10 instead of adding a
build option for it.
Stijn Tintel [Wed, 3 Nov 2021 18:00:26 +0000 (20:00 +0200)]
kernel: add missing KASAN config symbols
Enabling KERNEL_KASAN exposes several missing symbols. As KASAN_SW_TAGS
is only implemented for arm64 CPUs and requires clang, it doesn't make
sense to make this a build option so just default to KASAN_GENERIC and
disable KASAN_SW_TAGS.
While at it, disable TEST_KASAN_MODULE in the generic 5.10 config.
Wout Bertrums [Fri, 5 Nov 2021 14:09:28 +0000 (15:09 +0100)]
ramips: add broken-flash-reset for HLK-7621A EvB
This is needed because the HLK-7621 EvB has 32MB of flash,
so it will have to use 4B addressing and the
broken-flash-reset hack has to be used to be able to reboot.
Signed-off-by: Wout Bertrums <wout@wbnet.eu>
[copied github message into commit message] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Alberto Bursi [Wed, 3 Nov 2021 19:37:27 +0000 (20:37 +0100)]
x86: sort alphabetically default packages
sorting alphabetically default packages
and placing them on their own line.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
[fixed whitespaces before tab, double whitespaces] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Alberto Bursi [Wed, 3 Nov 2021 19:30:56 +0000 (20:30 +0100)]
x86: enable kmod-tg3 on 64-bit by default
Gigabit ethernet adapters using BCM5719/5720 chipset
are common on servers and as easy/cheap to get as
Intel based ones.
Usually found in 2-port and 4-port cards.
Also some devices recently added to x86_64 target
like the Meraki MX100 use this chipset for 8 of
their 12 integrated ports.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Device tree pcie node for this SoC is using different
styles in its different properties. Hence properly
unify them to be able to write a a proper yaml schema
documentation.
DT 'ethsys' node is being configured as a syscon
to get access to reset and other registers in the
'mediateķ,mt7621-eth' driver. Since the 'sysc' is also
a syscon, provides the clock and also is virtually
mapped from the same physical address 0x1e000000 we
can just use 'sysc' as the phandle for the syscon in
the ethernet node. Compatible string 'mediatek,mt7621-ethsys'
of the node is not being used anywhere inside the kernel
so, this node can be safely removed.
ramips: mt7621-dts: properly define 'cpc' and 'mc' nodes
'cpc' and 'mc' nodes correspond with the MIPS 'Cluster Power Controller'
and 'MIPS Common Device Memory Map' which are present in some MIPS related
boards. There is already bindings documentation for these two located in:
- Documentation/devicetree/bindings/power/mti,mips-cpc.yaml
- Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
Hence, properly update compatible strings and align nodes with already
mainlined bindings documentation. Also, move their definition to a proper
place since both of them are not related with the palmbus at all.
ramips: mt7621-dts: make use of 'IRQ_TYPE_LEVEL_HIGH' instead of magic numbers
Nodes 'gdma' and 'hsdma' are using magic number '4' in interrupts property.
Use 'IRQ_TYPE_LEVEL_HIGH' instead to align with the rest of the nodes in
the file.
With "getting WIFI MAC from NVMEM" working on ath79 on 5.10,
the next logical step I think is to utilize nvmem subsystem
to also get the calibration data from there.
This will tremendously speed up the wifi bring-up, since
we no longer need the userspace helper for the simple
devices that can just load them from there.
included with this patch is a package/mac80211/refresh.
Tested on: WNDR3700v2, TP-Link Archer C7v2
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Paul Spooren [Wed, 13 Oct 2021 01:36:33 +0000 (15:36 -1000)]
imagebuilder: fix local packages/ folder
This commit fixes commit "2999f810ff: build,IB: include kmods only in
local builds" which cause the local packages/ folder only to be added
for local builds but no longer for ImageBuilder created by the Buildbot.
The commits intention was to use remote kmods repositories rather than
storing them locally. Accidentally the entire handling of the local
`packages/` was removed.
Re-add the folder and include a README describing what it can be used
for.
Felix Fietkau [Thu, 4 Nov 2021 19:04:44 +0000 (20:04 +0100)]
build: add support for using prebuilt LLVM toolchain
When the prebuilt llvm toolchain is unpacked into the source dir,
it is automatically picked up and used by the build system, and eBPF
based packages can be selected
Felix Fietkau [Thu, 4 Nov 2021 14:16:07 +0000 (15:16 +0100)]
llvm-bpf: support creating a tarball in bin
This can be used for adding the toolchain to an existing tree without having
to build it from scratch.
Enable building the toolchain + tarball by default on buildbot
Hauke Mehrtens [Sun, 31 Oct 2021 16:39:23 +0000 (17:39 +0100)]
valgrind: Update to version 3.18.1
This version has some improvements for musl.
This version works fine for me on MIPS 32 BE without MIPS16 even on musl.
The additional patch is needed to make valgrind use the correct syscall
numbers for new syscalls like clock_gettime64. The MIPS architecture
uses special syscall ranges which are different from most other systems.
The patch is pending upstream: https://bugs.kde.org/show_bug.cgi?id=444781
Hauke Mehrtens [Sun, 31 Oct 2021 16:37:59 +0000 (17:37 +0100)]
toolchain: gdb: Update to version 11.1
The removed patch was already applied upstream.
gdb now mandatory depends on gmp, tell configure where to find it
explicitly. We already build gmp in the tools directory for gcc. Also
make it use mpfr and mpc as we also build both of them.
Robert Marko [Wed, 3 Nov 2021 15:45:38 +0000 (16:45 +0100)]
ipq40xx: disable some devices due to kernel size
Disable some of the ipq40xx devices due to their kernel size limitations.
These devices fail to build with kernel 5.10 and full buildbot config.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
[keep gl-b1300/gl-s1300 enabled, extend commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Felix Fietkau [Wed, 3 Nov 2021 21:40:53 +0000 (22:40 +0100)]
hostapd: add wmm qos map set by default
This implements the mapping recommendations from RFC8325, with an
update from RFC8622. This ensures that DSCP marked packets are properly
sorted into WMM classes.
The map can be disabled by setting iw_qos_map_set to something invalid
like 'none'
Piotr Dymacz [Wed, 31 Mar 2021 07:44:36 +0000 (09:44 +0200)]
imx: introduce 'cortexa7' subtarget
This adds some essential files required by new 'cortexa7' subtarget,
dedicated for Cortex-A7 based NXP i.MX series. For now, the kernel
config-default focuses only on the i.MX 6UL family, as the following
changeset will introduce support for i.MX 6ULL based device. Support
for more platforms (e.g. i.MX 7) might be enabled later, while adding
more devices.
Piotr Dymacz [Wed, 13 Oct 2021 12:52:43 +0000 (14:52 +0200)]
uboot-envtools: move imx to imx_cortexa9
Subtarget-specific files under 'uboot-envtools' package are supported
since 6f3a05ebb0 ("uboot-envtools: support uci-default config also per
subtargets").
Piotr Dymacz [Sun, 28 Mar 2021 22:33:20 +0000 (00:33 +0200)]
imx: split into arch-specific subtargets
Modern NXP i.MX series includes several different families, based on
single- or multi-core Arm Cortex-A CPUs. To be able to support more
families within a single target, we split the 'imx' in arch-specific
subtargets, starting with 'cortexa9' for the Cortex-A9 based i.MX 6,
already supported by the original 'imx6' target.
Piotr Dymacz [Sun, 28 Mar 2021 14:56:18 +0000 (16:56 +0200)]
imx6: rename target to 'imx'
This is first step in migrating to a generic i.MX target which in the
next steps will also get divided into arch-specific subtargets.
In the result, this will make it possible to support, within a single
target, also other modern NXP i.MX families, like the i.MX 7, i.MX 8
or recently introduced i.MX 9.
Piotr Dymacz [Sun, 28 Mar 2021 14:46:21 +0000 (16:46 +0200)]
imx6: refresh and update target kernel configs
This is a minor extension of the commit 26ae69fd03 ("imx6: refresh
kernel config with 5.10 symbols"), with correct and full disable of
the Arm Cortex-A7 based i.MX 6UL and 6UL{L,Z} families support and
re-enable of the Cortex-A9 based i.MX 6L{S,X}.
U-Boot for the Gateworks Ventana includes filename of the boot script in
the default/embedded environment (see 'include/configs/gw_ventana.h' in
the U-Boot sources).
This restores the old boot script filename ('6x_bootscript-ventana'),
making Ventana boards boot again.
Fixes: 8dba71dd33 ("imx6: image: drop BOOT_SCRIPT and fix DEVICE_NAME") Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Piotr Dymacz [Fri, 17 Sep 2021 12:52:04 +0000 (14:52 +0200)]
ath79: add support for Netgear R6100
Netgear R6100 is a dual-band Wi-Fi 5 (AC1200) router based on Qualcomm
Atheros (AR9344 + QCA9882) platform. Support for this device was first
introduced in 15f6f67d18 (ar71xx). FCC ID: PY312400225.
Specifications:
- Atheros AR9344 (560 MHz)
- 128 MB of RAM (DDR2)
- 128 MB of flash (parallel NAND)
- 2T2R 2.4 GHz Wi-Fi (AR9344)
- 2T2R 5 GHz Wi-Fi (QCA9882)
- 5x 10/100 Mbps Ethernet (AR9344)
- 4x internal antenna
- 1x USB 2.0 (GPIO-controlled power)
- 6x LED, 3x button (reset, Wi-Fi, WPS)
- UART (4-pin, 2.54 mm pitch) header on PCB
- 1x mechanical power switch
- DC jack for main power input (12 V)
WARNING: sysupgrade from older stable releases is not possible, fresh
installation (via vendor's GUI or TFTP based recovery) is required.
Reason for that is increased kernel partition size.
Installation:
Use the 'factory' image under vendor's GUI or via TFTP U-Boot recovery.
You can use the 'nmrpflash' tool at a boot time, before kernel is loaded
or start it manually by pressing the 'reset' button for ~20 seconds from
powering up the device (U-Boot will start TFTP server on 192.168.1.1,
use TFTP client to send the image).
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Michael Pratt <mcpratt@pm.me> Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Hauke Mehrtens [Sun, 24 Oct 2021 23:48:17 +0000 (01:48 +0200)]
pistachio: Take bootargs from device tree
The boot arguments are copied into the device tree by the boot loader
and taken from the device tree by the kernel.
The code which takes the boot arguments from the different sources was
reworked with kernel 5.5.
We have to activate CONFIG_MIPS_CMDLINE_DTB_EXTEND to take the boot
arguments from the device tree.
Hauke Mehrtens [Sun, 24 Oct 2021 18:13:23 +0000 (20:13 +0200)]
pistachio: Fix FIT image configuration name
The pistachio U-Boot expects a default configuration with the name
config@1 in the FIT image. The default was changed in OpenWrt some
months ago.
This makes the board boot again.
Fixes: 9f714398e060 ("build: use config-1 instead of config@1 as default") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rosen Penev [Wed, 20 Oct 2021 23:27:49 +0000 (16:27 -0700)]
strace: remove code coverage makefile var
It relies on a custom ax_code_coverage.m4 file included with strace.
Unfortunately, this conflicts with the one included with
autoconf-macros. Instead of creating a huge patch to fix it, just remove
the variable as code coverage is not used here.
Mathias Kresin [Sat, 23 Oct 2021 19:14:04 +0000 (21:14 +0200)]
kernel: 5.10: simplify logic in packet mangling patch
I had quite a hard time to understand what the change to net/core/dev.c
is supposed to do.
Simplify the change by returning NETDEV_TX_OK in case a eth_mangle_tx
callback was set but returned NULL instead of setting the return value
in the else branch.
Mathias Kresin [Sat, 23 Oct 2021 19:14:02 +0000 (21:14 +0200)]
kernel: 5.10: fix ar8216 vlans
ar8216 switches have a hardware bug, which renders normal 802.1q support
unusable. Packet mangling is required to fix up the vlan for incoming
packets.
The patch was ommited at the time kernel 5.10 support was added but is
still required for ar8216 switches.
Paul Spooren [Thu, 21 Oct 2021 01:07:25 +0000 (15:07 -1000)]
uml: build target again via the Buildbots
The UML target been outdated for a long time. Instead of just carrying
unmaintained code we should build it again and allow people and CIs to
use it for testing.
This commit removes the `source-only` feature which disables building.
Paul Spooren [Wed, 20 Oct 2021 03:41:08 +0000 (17:41 -1000)]
uml: drop 32Bit host build support
This step drops support host build systems other than x86/64 to allow
two Kernel configuration in parallel. With this commit the setup follow
the config style of all other targets.
projects / thirdparty / openwrt.git / log
