HFSC assumes that inner classes have an fsc curve, but it is currently
possible for classes without an fsc curve to become parents. This leads
to bugs including a use-after-free.
Don't allow non-root classes without HFSC_FSC to become parents.
Maximum size of buffer is obtained from underlying I2C adapter and in
case adapter allows I2C transaction buffer size greater than 100 bytes,
transaction will fail due to firmware limitation.
As a result driver will fail initialization.
Limit the maximum size of transaction buffer by 100 bytes to fit to
firmware.
Remove unnecessary calculation:
max_t(u16, MLXSW_I2C_BLK_DEF, quirk_size).
This condition can not happened.
Fixes: 3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver reads commands output from the output mailbox. If the size
of the output mailbox is not a multiple of the transaction /
block size, then the driver will not issue enough read transactions
to read the entire output, which can result in driver initialization
errors.
Fix by determining the number of transactions using DIV_ROUND_UP().
Fixes: 3029a693beda ("mlxsw: i2c: Allow flexible setting of I2C transactions size") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
local_irq_disable(). Compile tested only.
Fixes: 05fcd31cc472 ("arcnet: add err_skb package for package status feedback") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The debugfs_create_dir() function returns error pointers,
it never returns NULL. Most incorrect error checks were fixed,
but the one in ath9k_htc_init_debug() was forgotten.
Fix the remaining error check.
Fixes: e5facc75fa91 ("ath9k_htc: Cleanup HTC debugfs") Signed-off-by: Wang Ming <machel@vivo.com> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230713030358.12379-1-machel@vivo.com Signed-off-by: Sasha Levin <sashal@kernel.org>
It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.
Fixes: baac6276c0a9 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
In 'mwifiex_handle_uap_rx_forward()', always check the value
returned by 'skb_copy()' to avoid potential NULL pointer
dereference in 'mwifiex_uap_queue_bridged_pkt()', and drop
original skb in case of copying failure.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 838e4f449297 ("mwifiex: improve uAP RX handling") Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230814095041.16416-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
The previous commit dd3e4fc75b4a ("nl80211/cfg80211: add BSS color to
NDP ranging parameters") adds a parameter for NDP ranging by introducing
a new attribute type named NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR.
However, the author forgot to also describe the nla_policy at
nl80211_pmsr_ftm_req_attr_policy (net/wireless/nl80211.c). Just
complement it to avoid malformed attribute that causes out-of-attribute
access.
Fixes: dd3e4fc75b4a ("nl80211/cfg80211: add BSS color to NDP ranging parameters") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230809033151.768910-1-linma@zju.edu.cn Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
If ath9k_wmi_cmd() has exited with a timeout, it is possible that during
next ath9k_wmi_cmd() call the wmi_rsp callback for previous wmi command
writes to new wmi->cmd_rsp_buf and makes a completion. This results in an
invalid ath9k_wmi_cmd() return value.
Move the replacement of WMI command response buffer and length under
wmi_lock. Note that last_seq_id value is updated there, too.
Thus, the buffer cannot be written to by a belated wmi_rsp callback
because that path is properly rejected by the last_seq_id check.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230425192607.18015-2-pchelkin@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, the synchronization between ath9k_wmi_cmd() and
ath9k_wmi_ctrl_rx() is exposed to a race condition which, although being
rather unlikely, can lead to invalid behaviour of ath9k_wmi_cmd().
Consider the following scenario:
CPU0 CPU1
ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
ath9k_wmi_cmd_issue(...)
wait_for_completion_timeout(...)
---
timeout
---
/* the callback is being processed
* before last_seq_id became zero
*/
ath9k_wmi_ctrl_rx(...)
spin_lock_irqsave(...)
/* wmi->last_seq_id check here
* doesn't detect timeout yet
*/
spin_unlock_irqrestore(...)
/* last_seq_id is zeroed to
* indicate there was a timeout
*/
wmi->last_seq_id = 0
mutex_unlock(&wmi->op_mutex)
return -ETIMEDOUT
ath9k_wmi_cmd(...)
mutex_lock(&wmi->op_mutex)
/* the buffer is replaced with
* another one
*/
wmi->cmd_rsp_buf = rsp_buf
wmi->cmd_rsp_len = rsp_len
ath9k_wmi_cmd_issue(...)
spin_lock_irqsave(...)
spin_unlock_irqrestore(...)
wait_for_completion_timeout(...)
/* the continuation of the
* callback left after the first
* ath9k_wmi_cmd call
*/
ath9k_wmi_rsp_callback(...)
/* copying data designated
* to already timeouted
* WMI command into an
* inappropriate wmi_cmd_buf
*/
memcpy(...)
complete(&wmi->cmd_wait)
/* awakened by the bogus callback
* => invalid return result
*/
mutex_unlock(&wmi->op_mutex)
return 0
To fix this, update last_seq_id on timeout path inside ath9k_wmi_cmd()
under the wmi_lock. Move ath9k_wmi_rsp_callback() under wmi_lock inside
ath9k_wmi_ctrl_rx() so that the wmi->cmd_wait can be completed only for
initially designated wmi_cmd call, otherwise the path would be rejected
with last_seq_id check.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230425192607.18015-1-pchelkin@ispras.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
In the commit 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup
potential deadlock"), a potential deadlock issue was addressed, which
resulted in *_map_lookup_elem not triggering BPF programs.
(prior to lookup, bpf_disable_instrumentation() is used)
To resolve the broken map lookup probe using "htab_map_lookup_elem",
this commit introduces an alternative approach. Instead, it utilize
"bpf_map_copy_value" and apply a filter specifically for the hash table
with map_type.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Fixes: 7c4cd051add3 ("bpf: Fix syscall's stackmap lookup potential deadlock") Link: https://lore.kernel.org/r/20230818090119.477441-8-danieltimlee@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Process result of ocfs2_add_entry() in case we have an error
value.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lkml.kernel.org/r/20230803145417.177649-1-artem.chernyshev@red-soft.ru Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Artem Chernyshev <artem.chernyshev@red-soft.ru> Cc: Joel Becker <jlbec@evilplan.org> Cc: Kurt Hackel <kurt.hackel@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
LWTUNNEL_XMIT_CONTINUE is implicitly assumed in ip(6)_finish_output2,
such that any positive return value from a xmit hook could cause
unexpected continue behavior, despite that related skb may have been
freed. This could be error-prone for future xmit hook ops. One of the
possible errors is to return statuses of dst_output directly.
To make the code safer, redefine LWTUNNEL_XMIT_CONTINUE value to
distinguish from dst_output statuses and check the continue
condition explicitly.
BPF encap ops can return different types of positive values, such like
NET_RX_DROP, NET_XMIT_CN, NETDEV_TX_BUSY, and so on, from function
skb_do_redirect and bpf_lwt_xmit_reroute. At the xmit hook, such return
values would be treated implicitly as LWTUNNEL_XMIT_CONTINUE in
ip(6)_finish_output2. When this happens, skbs that have been freed would
continue to the neighbor subsystem, causing use-after-free bug and
kernel crashes.
To fix the incorrect behavior, skb_do_redirect return values can be
simply discarded, the same as tc-egress behavior. On the other hand,
bpf_lwt_xmit_reroute returns useful errors to local senders, e.g. PMTU
information. Thus convert its return values to avoid the conflict with
LWTUNNEL_XMIT_CONTINUE.
Fixes: 3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure") Reported-by: Jordan Griege <jgriege@cloudflare.com> Suggested-by: Martin KaFai Lau <martin.lau@linux.dev> Suggested-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Yan Zhai <yan@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/0d2b878186cfe215fec6b45769c1cd0591d3628d.1692326837.git.yan@cloudflare.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Chips such as BCM7278 support system wide suspend/resume which will
cause the HWRNG block to lose its state and reset to its power on reset
register values. We need to cleanup and re-initialize the HWRNG for it
to be functional coming out of a system suspend cycle.
Fixes: c3577f6100ca ("hwrng: iproc-rng200 - Add support for BCM7278") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
Now there are two indicators of socket memory pressure sit inside
struct mem_cgroup, socket_pressure and tcpmem_pressure, indicating
memory reclaim pressure in memcg->memory and ->tcpmem respectively.
When in legacy mode (cgroupv1), the socket memory is charged into
->tcpmem which is independent of ->memory, so socket_pressure has
nothing to do with socket's pressure at all. Things could be worse
by taking socket_pressure into consideration in legacy mode, as a
pressure in ->memory can lead to premature reclamation/throttling
in socket.
While for the default mode (cgroupv2), the socket memory is charged
into ->memory, and ->tcpmem/->tcpmem_pressure are simply not used.
So {socket,tcpmem}_pressure are only used in default/legacy mode
respectively for indicating socket memory pressure. This patch fixes
the pieces of code that make mixed use of both.
Fixes: 8e8ae645249b ("mm: memcontrol: hook up vmpressure to socket pressure") Signed-off-by: Abel Wu <wuyun.abel@bytedance.com> Acked-by: Shakeel Butt <shakeelb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The bench_rename_fmodret has been removed in commit b000def2e052
("selftests: Remove fmod_ret from test_overhead"), thus remove it
from the runners in the test script.
Fixes: b000def2e052 ("selftests: Remove fmod_ret from test_overhead") Signed-off-by: Yipeng Zou <zouyipeng@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20230814030727.3010390-1-zouyipeng@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
In tcp_retransmit_timer(), a window shrunk connection will be regarded
as timeout if 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX'. This is not
right all the time.
The retransmits will become zero-window probes in tcp_retransmit_timer()
if the 'snd_wnd==0'. Therefore, the icsk->icsk_rto will come up to
TCP_RTO_MAX sooner or later.
However, the timer can be delayed and be triggered after 122877ms, not
TCP_RTO_MAX, as I tested.
Therefore, 'tcp_jiffies32 - tp->rcv_tstamp > TCP_RTO_MAX' is always true
once the RTO come up to TCP_RTO_MAX, and the socket will die.
Fix this by replacing the 'tcp_jiffies32' with '(u32)icsk->icsk_timeout',
which is exact the timestamp of the timeout.
However, "tp->rcv_tstamp" can restart from idle, then tp->rcv_tstamp
could already be a long time (minutes or hours) in the past even on the
first RTO. So we double check the timeout with the duration of the
retransmission.
Meanwhile, making "2 * TCP_RTO_MAX" as the timeout to avoid the socket
dying too soon.
in nokia_bluetooth_serdev_probe(), check the return value of
clk_prepare_enable() and return the error code if
clk_prepare_enable() returns an unexpected value.
Fixes: 7bb318680e86 ("Bluetooth: add nokia driver") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The function crypto_drop_spawn expects to be called in process
context. However, when an instance is unregistered while it still
has active users, the last user may cause the instance to be freed
in atomic context.
If pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, this
means the clk wasn't prepared and enabled. Returning early in this case
however is wrong as then the following resource frees are skipped and this
is never catched up. So do all the cleanups but clk_disable_unprepare().
Also don't emit a warning, as stm32_hash_runtime_resume() already emitted
one.
Note that the return value of stm32_hash_remove() is mostly ignored by
the device core. The only effect of returning zero instead of an error
value is to suppress another warning in platform_remove(). So return 0
even if pm_runtime_resume_and_get() failed.
commit bdeeed3498c7 ("libbpf: fix offsetof() and container_of() to work with CO-RE")
...was backported to stable trees such as 5.15. The problem is that with older
LLVM/clang (14/15) - which is often used for older kernels - we see compilation
failures in BPF selftests now:
In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:90:2: error: static assertion expression is not an integral constant expression
sizeof(flow_ports_t) !=
^~~~~~~~~~~~~~~~~~~~~~~
progs/test_cls_redirect.c:91:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
offsetofend(struct bpf_sock_tuple, ipv4.dport) -
^
progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'
(offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
^
In file included from progs/test_cls_redirect_subprogs.c:2:
progs/test_cls_redirect.c:95:2: error: static assertion expression is not an integral constant expression
sizeof(flow_ports_t) !=
^~~~~~~~~~~~~~~~~~~~~~~
progs/test_cls_redirect.c:96:3: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
offsetofend(struct bpf_sock_tuple, ipv6.dport) -
^
progs/test_cls_redirect.c:32:3: note: expanded from macro 'offsetofend'
(offsetof(TYPE, MEMBER) + sizeof((((TYPE *)0)->MEMBER)))
^
tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:86:33: note: expanded from macro 'offsetof'
^
2 errors generated.
make: *** [Makefile:594: tools/testing/selftests/bpf/test_cls_redirect_subprogs.bpf.o] Error 1
The problem is the new offsetof() does not play nice with static asserts.
Given that the context is a static assert (and CO-RE relocation is not
needed at compile time), offsetof() usage can be replaced by restoring
the original offsetof() definition as __builtin_offsetof().
Fixes: bdeeed3498c7 ("libbpf: fix offsetof() and container_of() to work with CO-RE") Reported-by: Colm Harrington <colm.harrington@oracle.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Tested-by: Yipeng Zou <zouyipeng@huawei.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/r/20230802073906.3197480-1-alan.maguire@oracle.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add missing 'kfree_skb()' in 'mwifiex_init_rxq_ring()' and never do
'kfree(card->rxbd_ring_vbase)' because this area is DMAed and should
be released with 'dma_free_coherent()'. The latter is performed in
'mwifiex_pcie_delete_rxbd_ring()', which is now called to recover
from possible errors in 'mwifiex_pcie_create_rxbd_ring()'. Likewise
for 'mwifiex_pcie_init_evt_ring()', 'kfree(card->evtbd_ring_vbase)'
'mwifiex_pcie_delete_evtbd_ring()' and 'mwifiex_pcie_create_rxbd_ring()'.
Fixes: d930faee141b ("mwifiex: add support for Marvell pcie8766 chipset") Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230731074334.56463-1-dmantipov@yandex.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
Make sure mwifiex_process_mgmt_packet,
mwifiex_process_sta_rx_packet and mwifiex_process_uap_rx_packet,
mwifiex_uap_queue_bridged_pkt and mwifiex_process_rx_packet
not out-of-bounds access the skb->data buffer.
Fixes: 2dbaf751b1de ("mwifiex: report received management frames to cfg80211") Signed-off-by: Polaris Pi <pinkperfect2021@gmail.com> Reviewed-by: Matthew Wang <matthewmwang@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230723070741.1544662-1-pinkperfect2021@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
If user changes the channel without completely disabling the interface the
txpower_sku values reported track the old channel the device was operating on.
If user bounces the interface the correct power tables are applied.
mt7915_sku_group_len array gets updated before the channel switch happens so it
uses data from the old channel.
Fixes: ecb187a74e18 ("mt76: mt7915: rework the flow of txpower setting") Fixes: f1d962369d56 ("mt76: mt7915: implement HE per-rate tx power support") Reported-By: Chad Monroe <chad.monroe@smartrg.com> Tested-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
It seems that the nla_policy in mt76_tm_policy is missed for attribute
MT76_TM_ATTR_TX_LENGTH. This patch adds the correct description to make
sure the
u32 val = nla_get_u32(tb[MT76_TM_ATTR_TX_LENGTH]);
in function mt76_testmode_cmd() is safe and will not result in
out-of-attribute read.
Fixes: f0efa8621550 ("mt76: add API for testmode support") Signed-off-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add reasons to __udp6_lib_rcv for skb drops. The only twist is that the
NO_SOCKET takes precedence over the CSUM or other counters for that
path (motivation behind this patch - csum counter was misleading).
Signed-off-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 9c02bec95954 ("bpf, net: Support SO_REUSEPORT sockets with bpf_sk_assign") Signed-off-by: Sasha Levin <sashal@kernel.org>
sk = some_lookup_func()
bpf_sk_assign(skb, sk)
bpf_sk_release(sk)
That is, the sk is not consumed by bpf_sk_assign. The function
therefore needs to make sure that sk lives long enough to be
consumed from __inet_lookup_skb. The path through the stack for a
TCPv4 packet is roughly:
The existing helper takes advantage of the fact that everything
happens in the same RCU critical section: for sockets with
SOCK_RCU_FREE set bpf_sk_assign never takes a reference.
skb_steal_sock then checks SOCK_RCU_FREE again and does sock_put
if necessary.
This approach assumes that SOCK_RCU_FREE is never set on a sk
between bpf_sk_assign and skb_steal_sock, but this invariant is
violated by unhashed UDP sockets. A new UDP socket is created
in TCP_CLOSE state but without SOCK_RCU_FREE set. That flag is only
added in udp_lib_get_port() which happens when a socket is bound.
When bpf_sk_assign was added it wasn't possible to access unhashed
UDP sockets from BPF, so this wasn't a problem. This changed
in commit 0c48eefae712 ("sock_map: Lift socket state restriction
for datagram sockets"), but the helper wasn't adjusted accordingly.
The following sequence of events will therefore lead to a refcount
leak:
1. Add socket(AF_INET, SOCK_DGRAM) to a sockmap.
2. Pull socket out of sockmap and bpf_sk_assign it. Since
SOCK_RCU_FREE is not set we increment the refcount.
3. bind() or connect() the socket, setting SOCK_RCU_FREE.
4. skb_steal_sock will now set refcounted = false due to
SOCK_RCU_FREE.
5. tcp_v4_rcv() skips sock_put().
Fix the problem by rejecting unhashed sockets in bpf_sk_assign().
This matches the behaviour of __inet_lookup_skb which is ultimately
the goal of bpf_sk_assign().
Fixes: cf7fbe660f2d ("bpf: Add socket assign support") Cc: Joe Stringer <joe@cilium.io> Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-2-7021b683cdae@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Contrary to TCP, UDP reuseport groups can contain TCP_ESTABLISHED
sockets. To support these properly we remember whether a group has
a connected socket and skip the fast reuseport early-return. In
effect we continue scoring all reuseport sockets and then choose the
one with the highest score.
The current code fails to re-calculate the score for the result of
lookup_reuseport. According to Kuniyuki Iwashima:
1) SO_INCOMING_CPU is set
-> selected sk might have +1 score
2) BPF prog returns ESTABLISHED and/or SO_INCOMING_CPU sk
-> selected sk will have more than 8
Using the old score could trigger more lookups depending on the
order that sockets are created.
sk -> sk (SO_INCOMING_CPU) -> sk (ESTABLISHED)
| |
`-> select the next SO_INCOMING_CPU sk
|
`-> select itself (We should save this lookup)
Fixes: efc6b6f6c311 ("udp: Improve load balancing for SO_REUSEPORT.") Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Lorenz Bauer <lmb@isovalent.com> Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-1-7021b683cdae@isovalent.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The kunit tests discovered a sleeping in atomic bug. The allocations
in the regcache-rbtree code should use the map->alloc_flags instead of
GFP_KERNEL.
[ 5.005510] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:306
[ 5.005960] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 117, name: kunit_try_catch
[ 5.006219] preempt_count: 1, expected: 0
[ 5.006414] 1 lock held by kunit_try_catch/117:
[ 5.006590] #0: 833b9010 (regmap_kunit:86:(config)->lock){....}-{2:2}, at: regmap_lock_spinlock+0x14/0x1c
[ 5.007493] irq event stamp: 162
[ 5.007627] hardirqs last enabled at (161): [<80786738>] crng_make_state+0x1a0/0x294
[ 5.007871] hardirqs last disabled at (162): [<80c531ec>] _raw_spin_lock_irqsave+0x7c/0x80
[ 5.008119] softirqs last enabled at (0): [<801110ac>] copy_process+0x810/0x2138
[ 5.008356] softirqs last disabled at (0): [<00000000>] 0x0
[ 5.008688] CPU: 0 PID: 117 Comm: kunit_try_catch Tainted: G N 6.4.4-rc3-g0e8d2fdfb188 #1
[ 5.009011] Hardware name: Generic DT based system
[ 5.009277] unwind_backtrace from show_stack+0x18/0x1c
[ 5.009497] show_stack from dump_stack_lvl+0x38/0x5c
[ 5.009676] dump_stack_lvl from __might_resched+0x188/0x2d0
[ 5.009860] __might_resched from __kmem_cache_alloc_node+0x1dc/0x25c
[ 5.010061] __kmem_cache_alloc_node from kmalloc_trace+0x30/0xc8
[ 5.010254] kmalloc_trace from regcache_rbtree_write+0x26c/0x468
[ 5.010446] regcache_rbtree_write from _regmap_write+0x88/0x140
[ 5.010634] _regmap_write from regmap_write+0x44/0x68
[ 5.010803] regmap_write from basic_read_write+0x8c/0x270
[ 5.010980] basic_read_write from kunit_try_run_case+0x48/0xa0
Fixes: 28644c809f44 ("regmap: Add the rbtree cache support") Reported-by: Guenter Roeck <linux@roeck-us.net> Closes: https://lore.kernel.org/all/ee59d128-413c-48ad-a3aa-d9d350c80042@roeck-us.net/ Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/58f12a07-5f4b-4a8f-ab84-0a42d1908cb9@moroto.mountain Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The nomadik driver uses devres to register itself with the hwrng core,
the driver will be unregistered from hwrng when its device goes out of
scope. This happens after the driver's remove function is called.
However, nomadik's clock is disabled in the remove function. There's a
short timeframe where nomadik is still registered with the hwrng core
although its clock is disabled. I suppose the clock must be active to
access the hardware and serve requests from the hwrng core.
Switch to devm_clk_get_enabled and let devres disable the clock and
unregister the hwrng. This avoids the race condition.
Fixes: 3e75241be808 ("hwrng: drivers - Use device-managed registration API") Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
To avoid returning uninitialized or random values when querying the file
descriptor (fd) and accessing probe_addr, it is necessary to clear the
variable prior to its use.
CLANG profiler.bpf.o
CLANG pid_iter.bpf.o
skeleton/profiler.bpf.c:18:21: error: invalid application of 'sizeof' to an incomplete type 'struct bpf_perf_event_value'
__uint(value_size, sizeof(struct bpf_perf_event_value));
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:13:39: note: expanded from macro '__uint'
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helper_defs.h:7:8: note: forward declaration of 'struct bpf_perf_event_value'
struct bpf_perf_event_value;
^
struct bpf_perf_event_value is being used in the kernel only when
CONFIG_BPF_EVENTS is enabled, so it misses a BTF entry then.
Define struct bpf_perf_event_value___local with the
`preserve_access_index` attribute inside the pid_iter BPF prog to
allow compiling on any configs. It is a full mirror of a UAPI
structure, so is compatible both with and w/o CO-RE.
bpf_perf_event_read_value() requires a pointer of the original type,
so a cast is needed.
Since the 'cpus' field of policy structure will become empty in the
cpufreq core API, it is better to use 'related_cpus' in the exit()
callback of driver.
preserve_pci_rom_image() was accessing the romsize field in
efi_pci_io_protocol_t directly instead of using the efi_table_attr()
helper. This prevents the ROM image from being saved correctly during a
mixed mode boot.
Fixes: 2c3625cb9fa2 ("efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function") Signed-off-by: Mikel Rychliski <mikel@mikelr.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The constraints table should be resetting the `list` object
after running through all of `info_obj` iterations.
This adjusts whitespace as well as less code will now be included
with each loop. This fixes a functional problem is fixed where a
badly formed package in the inner loop may have incorrect data.
Fixes: 146f1ed852a8 ("ACPI: PM: s2idle: Add AMD support to handle _DSM") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
When code uses a pre-increment it makes the reader question "why".
In the constraint fetching code there is no reason for the variables
to be pre-incremented so adjust to post-increment.
No intended functional changes.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Suggested-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 9cc8cd086f05 ("ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table") Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES securekey blobs as a
supplement to the PKEY_TYPE_EP11 (which won't work in environments
with session-bound keys). This new keyblobs has a different maximum
size, so fix paes crypto module to accept also these larger keyblobs.
Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES as a supplement to
PKEY_TYPE_EP11. All pkeys have an internal header/payload structure,
which is opaque to the userspace. The header structures for
PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES are nearly identical and there
is no reason, why different structures are used. In preparation to fix
the keyversion handling in the broken PKEY IOCTLs, the same header
structure is used for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES. This
reduces the number of different code paths and increases the
readability.
Fixes: fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC private keys") Signed-off-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Observed occassional failures in the futex_wait_timeout test:
ok 1 futex_wait relative succeeds
ok 2 futex_wait_bitset realtime succeeds
ok 3 futex_wait_bitset monotonic succeeds
ok 4 futex_wait_requeue_pi realtime succeeds
ok 5 futex_wait_requeue_pi monotonic succeeds
not ok 6 futex_lock_pi realtime returned 0
......
The test expects the child thread to complete some steps before
the parent thread gets to run. There is an implicit expectation
of the order of invocation of futex_lock_pi between the child thread
and the parent thread. Make this order explicit. If the order is
not met, the futex_lock_pi call in the parent thread succeeds and
will not timeout.
In current driver, counter0 will be enabled after ddr_perf_pmu_enable()
is called even though none of the 4 counters are used. This will cause
counter0 continue to count until ddr_perf_pmu_disabled() is called. If
pmu is not disabled all the time, the pmu interrupt will be asserted
from time to time due to counter0 will overflow and irq handler will
clear it. It's not an expected behavior. This patch will not enable
counter0 if none of 4 counters are used.
Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20230811015438.1999307-2-xu.yang_2@nxp.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 4-to-5 level mode switch trampoline disables long mode and paging in
order to be able to flick the LA57 bit. According to section 3.4.1.1 of
the x86 architecture manual [0], 64-bit GPRs might not retain the upper
32 bits of their contents across such a mode switch.
Given that RBP, RBX and RSI are live at this point, preserve them on the
stack, along with the return address that might be above 4G as well.
"Because the upper 32 bits of 64-bit general-purpose registers are
undefined in 32-bit modes, the upper 32 bits of any general-purpose
register are not preserved when switching from 64-bit mode to a 32-bit
mode (to protected mode or compatibility mode). Software must not
depend on these bits to maintain a value after a 64-bit to 32-bit
mode switch."
A child calls PARENT_EXIT() when it fails to run a benchmark to kill
the parent process. PARENT_EXIT() lacks unmount for the resctrl FS and
the parent won't be there to unmount it either after it gets killed.
Add the resctrl FS unmount also to PARENT_EXIT().
Fixes: 591a6e8588fc ("selftests/resctrl: Add basic resctrl file system operations and data") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The error path in fill_cache() does return before the allocated buffer
is freed leaking the buffer.
The leak was introduced when fill_cache_read() started to return errors
in commit c7b607fa9325 ("selftests/resctrl: Fix null pointer
dereference on open failed"), before that both fill functions always
returned 0.
Move free() earlier to prevent the mem leak.
Fixes: c7b607fa9325 ("selftests/resctrl: Fix null pointer dereference on open failed") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Tested-by: Babu Moger <babu.moger@amd.com> Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In kselftest framework, all tests can be build/run at a time,
and a sub test also can be build/run individually. As follows:
$ make kselftest-all TARGETS=resctrl
$ make -C tools/testing/selftests run_tests
$ make -C tools/testing/selftests TARGETS=resctrl run_tests
However, resctrl_tests cannot be run using kselftest framework,
users have to change directory to tools/testing/selftests/resctrl/,
run "make" to build executable file "resctrl_tests",
and run "sudo ./resctrl_tests" to execute the test.
To build/run resctrl_tests using kselftest framework.
Modify tools/testing/selftests/Makefile
and tools/testing/selftests/resctrl/Makefile.
Even after this change, users can still build/run resctrl_tests
without using framework as before.
The likely cause is that init_waitqueue_head() is called after the call to
the torture_create_kthread() function that creates the ref_scale_reader
kthread. Although this init_waitqueue_head() call will very likely
complete before this kthread is created and starts running, it is
possible that the calling kthread will be delayed between the calls to
torture_create_kthread() and init_waitqueue_head(). In this case, the
new kthread will use the waitqueue head before it is properly initialized,
which is not good for the kernel's health and well-being.
The above crash happened here:
static inline void __add_wait_queue(...)
{
:
if (!(wq->flags & WQ_FLAG_PRIORITY)) <=== Crash here
The offset of flags from list_head entry in wait_queue_entry is
-0x18. If reader_tasks[i].wq.head.next is NULL as allocated reader_task
structure is zero initialized, the instruction will try to access address
0xffffffffffffffe8, which is exactly the fault address listed above.
This commit therefore invokes init_waitqueue_head() before creating
the kthread.
Fixes: 653ed64b01dc ("refperf: Add a test to measure performance of read-side synchronization") Signed-off-by: Waiman Long <longman@redhat.com> Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Since commit 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store
thread_info->abi_syscall"), the seccomp selftests "syscall_errno"
and "syscall_faked" have been broken. Both seccomp and PTRACE depend
on using the special value of "-1" for skipping syscalls. This value
wasn't working because it was getting masked by __NR_SYSCALL_MASK in
both PTRACE_SET_SYSCALL and get_syscall_nr().
Explicitly test for -1 in PTRACE_SET_SYSCALL and get_syscall_nr(),
leaving it exposed when present, allowing tracers to skip syscalls
again.
Since commit 4e57a4ddf6b0 ("ARM: 9107/1: syscall: always store
thread_info->abi_syscall"), the seccomp selftests "syscall_restart" has
been broken. This was caused by the restart syscall not being stored to
"abi_syscall" during restart setup before branching to the "local_restart"
label. Tracers would see the wrong syscall, and scno would get overwritten
while returning from the TIF_WORK path. Add the missing store.
Tests that were expecting a signal were not correctly checking for a
SKIP condition. Move the check before the signal checking when
processing test result.
Cc: Shuah Khan <shuah@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: linux-kselftest@vger.kernel.org Fixes: 9847d24af95c ("selftests/harness: Refactor XFAIL into SKIP") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
"The other outstanding issue I noticed comes from the fact that
fsconfig syscalls may occur in a different userns than that which
called fsopen. That means that resolving the uid/gid via
current_user_ns() can save a kuid that isn't mapped in the associated
namespace when the filesystem is finally mounted. This means that it
is possible for an unprivileged user to create files owned by any
group in a tmpfs mount (since we can set the SUID bit on the tmpfs
directory), or a tmpfs that is owned by any user, including the root
group/user."
The contract for {g,u}id mount options and {g,u}id values in general set
from userspace has always been that they are translated according to the
caller's idmapping. In so far, tmpfs has been doing the correct thing.
But since tmpfs is mountable in unprivileged contexts it is also
necessary to verify that the resulting {k,g}uid is representable in the
namespace of the superblock to avoid such bugs as above.
The new mount api's cross-namespace delegation abilities are already
widely used. After having talked to a bunch of userspace this is the
most faithful solution with minimal regression risks. I know of one
users - systemd - that makes use of the new mount api in this way and
they don't set unresolable {g,u}ids. So the regression risk is minimal.
Link: https://lore.kernel.org/lkml/CALxfFW4BXhEwxR0Q5LSkg-8Vb4r2MONKCcUCVioehXQKr35eHg@mail.gmail.com Fixes: f32356261d44 ("vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API") Reviewed-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org> Reported-by: Seth Jenkins <sethjenkins@google.com>
Message-Id: <20230801-vfs-fs_context-uidgid-v1-1-daf46a050bbf@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The d_hash_and_lookup() function returns error pointers or NULL.
Most incorrect error checks were fixed, but the one in int path_pts()
was forgotten.
Fixes: eedf265aa003 ("devpts: Make each mount of devpts an independent filesystem.") Signed-off-by: Wang Ming <machel@vivo.com>
Message-Id: <20230713120555.7025-1-machel@vivo.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
where (2) and (3) are just modeled after (1). An eventfd must be
specified for use with the KVM_IRQFD ioctl(). This can also be an
EFD_SEMAPHORE eventfd. When the eventfd count is zero or has been
decremented to zero an underflow can be triggered when the irqfd is shut
down by raising the KVM_IRQFD_FLAG_DEASSIGN flag in the KVM_IRQFD
ioctl():
Userspace polling on the eventfd wouldn't notice the underflow because 1
is always returned as the value from eventfd_read() while ctx->count
would've underflowed. It's not a huge deal because this should only be
happening when the irqfd is shutdown but we should still fix it and
avoid the spurious wakeup.
Fixes: cb289d6244a3 ("eventfd - allow atomic read and waitqueue remove") Signed-off-by: Wen Yang <wenyang.linux@foxmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christian Brauner <brauner@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dylan Yudaken <dylany@fb.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Matthew Wilcox <willy@infradead.org> Cc: linux-fsdevel@vger.kernel.org Cc: linux-kernel@vger.kernel.org
Message-Id: <tencent_7588DFD1F365950A757310D764517A14B306@qq.com>
[brauner: rewrite commit message and add explanation how this underflow can happen] Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
__getblk() can return a NULL pointer if we run out of memory or if we
try to access beyond the end of the device; check it and handle it
appropriately.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/lkml/CAFcO6XOacq3hscbXevPQP7sXRoYFz34ZdKPYjmd6k5sZuhGFDw@mail.gmail.com/ Tested-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") # probably introduced in 2002 Acked-by: Edward Shishkin <edward.shishkin@gmail.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It was trying to work around an issue at the crypto layer by excluding
ASYNC implementations of gcm(aes), because a bug in the AESNI version
caused reordering when some requests bypassed the cryptd queue while
older requests were still pending on the queue.
This was fixed by commit 38b2f68b4264 ("crypto: aesni - Fix cryptd
reordering problem on gcm"), which pre-dates ab046a5d4be4.
Herbert Xu confirmed that all ASYNC implementations are expected to
maintain the ordering of completions wrt requests, so we can use them
in MACsec.
On my test machine, this restores the performance of a single netperf
instance, from 1.4Gbps to 4.4Gbps.
Bits, which are related to Bitmap Descriptor logical blocks,
are not reset when buffer headers are allocated for them. As the
result, these logical blocks can be treated as free and
be used for other blocks.This can cause usage of one buffer header
for several types of data. UDF issues WARNING in this situation:
WARNING: CPU: 0 PID: 2703 at fs/udf/inode.c:2014
__udf_add_aext+0x685/0x7d0 fs/udf/inode.c:2014
of: kexec: Mark ima_{free,stable}_kexec_buffer() as __init
This commit has no direct upstream equivalent.
After commit d48016d74836 ("mm,ima,kexec,of: use memblock_free_late from
ima_free_kexec_buffer") in 5.15, there is a modpost warning for certain
configurations:
WARNING: modpost: vmlinux.o(.text+0xb14064): Section mismatch in reference from the function ima_free_kexec_buffer() to the function .init.text:__memblock_free_late()
The function ima_free_kexec_buffer() references
the function __init __memblock_free_late().
This is often because ima_free_kexec_buffer lacks a __init
annotation or the annotation of __memblock_free_late is wrong.
In mainline, there is no issue because ima_free_kexec_buffer() is marked
as __init, which was done as part of commit b69a2afd5afc ("x86/kexec:
Carry forward IMA measurement log on kexec") in 6.0, which is not
suitable for stable.
Mark ima_free_kexec_buffer() and its single caller
ima_load_kexec_buffer() as __init in 5.15, as ima_load_kexec_buffer() is
only called from ima_init(), which is __init, clearing up the warning.
BPF programs that run on connect can rewrite the connect address. For
the connect system call this isn't a problem, because a copy of the address
is made when it is moved into kernel space. However, kernel_connect
simply passes through the address it is given, so the caller may observe
its address value unexpectedly change.
A practical example where this is problematic is where NFS is combined
with a system such as Cilium which implements BPF-based load balancing.
A common pattern in software-defined storage systems is to have an NFS
mount that connects to a persistent virtual IP which in turn maps to an
ephemeral server IP. This is usually done to achieve high availability:
if your server goes down you can quickly spin up a replacement and remap
the virtual IP to that endpoint. With BPF-based load balancing, mounts
will forget the virtual IP address when the address rewrite occurs
because a pointer to the only copy of that address is passed down the
stack. Server failover then breaks, because clients have forgotten the
virtual IP address. Reconnects fail and mounts remain broken. This patch
was tested by setting up a scenario like this and ensuring that NFS
reconnects worked after applying the patch.
Signed-off-by: Jordan Rife <jrife@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Import the latest version of the Arm Optimized Routines strncmp function based
on the upstream code of string/aarch64/strncmp.S at commit 189dfefe37d5 from:
https://github.com/ARM-software/optimized-routines
This latest version includes MTE support.
Note that for simplicity Arm have chosen to contribute this code to Linux under
GPLv2 rather than the original MIT OR Apache-2.0 WITH LLVM-exception license.
Arm is the sole copyright holder for this code.
Signed-off-by: Joey Gouly <joey.gouly@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20220301101435.19327-3-joey.gouly@arm.com Fixes: 020b199bc70d ("arm64: Import latest version of Cortex Strings' strncmp") Reported-by: John Hsu <John.Hsu@mediatek.com> Link: https://lore.kernel.org/all/e9f30f7d5b7d72a3521da31ab2002b49a26f542e.camel@mediatek.com/ Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is race issue when concurrently splice_read main trace_pipe and
per_cpu trace_pipes which will result in data read out being different
from what actually writen.
As suggested by Steven:
> I believe we should add a ref count to trace_pipe and the per_cpu
> trace_pipes, where if they are opened, nothing else can read it.
>
> Opening trace_pipe locks all per_cpu ref counts, if any of them are
> open, then the trace_pipe open will fail (and releases any ref counts
> it had taken).
>
> Opening a per_cpu trace_pipe will up the ref count for just that
> CPU buffer. This will allow multiple tasks to read different per_cpu
> trace_pipe files, but will prevent the main trace_pipe file from
> being opened.
But because we only need to know whether per_cpu trace_pipe is open or
not, using a cpumask instead of using ref count may be easier.
After this patch, users will find that:
- Main trace_pipe can be opened by only one user, and if it is
opened, all per_cpu trace_pipes cannot be opened;
- Per_cpu trace_pipes can be opened by multiple users, but each per_cpu
trace_pipe can only be opened by one user. And if one of them is
opened, main trace_pipe cannot be opened.
Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be
called concurrently from different code paths, we have no proper data
protection against races. Introduce open_mutex to each seq_oss_midi
object for avoiding the races.
The recently added support for command duration limits calls
scsi_report_opcode() four times as each device comes online, which
significantly increases the number of messages logged in a system with many
disks.
Fix the problem by always marking Hyper-V synthetic SCSI devices as not
supporting scsi_report_opcode(). With this setting, the MAINTENANCE_IN SCSI
command is not issued and no messages are logged.
The sctp_sf_eat_auth() function is supposed to return enum sctp_disposition
values but if the call to sctp_ulpevent_make_authkey() fails, it returns
-ENOMEM.
This results in calling BUG() inside the sctp_side_effects() function.
Calling BUG() is an over reaction and not helpful. Call WARN_ON_ONCE()
instead.
This code predates git.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
In the last step of the EEH recovery process, the EEH driver calls into
bnx2x_io_resume() to re-initialize the NIC hardware via the function
bnx2x_nic_load(). If an error occurs during bnx2x_nic_load(), OS and
hardware resources are released and an error code is returned to the
caller. When called from bnx2x_io_resume(), the return code is ignored
and the network interface is brought up unconditionally. Later attempts
to send a packet via this interface result in a page fault due to a null
pointer reference.
This patch checks the return code of bnx2x_nic_load(), prints an error
message if necessary, and does not enable the interface.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com> Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is a shift wrapping bug in this code on 32-bit architectures.
NETLBL_CATMAP_MAPTYPE is u64, bitmap is unsigned long.
Every second 32-bit word of catmap becomes corrupted.
Signed-off-by: Dmitry Mastykin <dmastykin@astralinux.ru> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
On PSP v13.x ASICs, boot loader will set only the MSB to 1 and clear the
least significant bits for any command submission. Hence match against
the exact register value, otherwise a register value of all 0xFFs also
could falsely indicate that boot loader is ready. Also, from PSP v13.0.6
and newer, bits[7:0] will be used to indicate command error status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
As &qedi_percpu->p_work_lock is acquired by hard IRQ qedi_msix_handler(),
other acquisitions of the same lock under process context should disable
IRQ, otherwise deadlock could happen if the IRQ preempts the execution
while the lock is held in process context on the same CPU.
qedi_cpu_offline() is one such function which acquires the lock in process
context.
When preparing protection DIF I/O for DMA, the driver obtains reference
tags from scsi_prot_ref_tag(). Previously, there was a wrong assumption
that an all 0xffffffff value meant error and thus the driver failed the
I/O. This patch removes the evaluation code and accepts whatever the upper
layer returns.
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common
than PCI devices. Hence it could have a fully functional s390 kernel
with CONFIG_PCI=n, then the relevant iomem mapping functions
[including ioremap(), devm_ioremap(), etc.] are not available.
Here let FSL_EDMA and INTEL_IDMA64 depend on HAS_IOMEM so that it
won't be built to cause below compiling error if PCI is unset.
Using brcmfmac with 6.5-rc3 on a brcmfmac43241b4-sdio triggers
a backtrace caused by the following field-spanning warning:
memcpy: detected field-spanning write (size 120) of single field
"¶ms_le->channel_list[0]" at
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:1072 (size 2)
The driver still works after this warning. The warning was introduced by the
new field-spanning write checks which were enabled recently.
Fix this by replacing the channel_list[1] declaration at the end of
the struct with a flexible array declaration.
Most users of struct brcmf_scan_params_le calculate the size to alloc
using the size of the non flex-array part of the struct + needed extra
space, so they do not care about sizeof(struct brcmf_scan_params_le).
brcmf_notify_escan_complete() however uses the struct on the stack,
expecting there to be room for at least 1 entry in the channel-list
to store the special -1 abort channel-id.
To make this work use an anonymous union with a padding member
added + the actual channel_list flexible array.
Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230729140500.27892-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
It is incorrect in python to compare integer values using the "is" keyword.
The "is" keyword in python is used to compare references to two objects,
not their values. Newer version of python3 (version 3.8) throws a warning
when such incorrect comparison is made. For value comparison, "==" should
be used.
Fix this in the code and suppress the following warning:
/usr/sbin/vmbus_testing:167: SyntaxWarning: "is" with a literal. Did you mean "=="?
On s390 systems (aka mainframes), it has classic channel devices for
networking and permanent storage that are currently even more common
than PCI devices. Hence it could have a fully functional s390 kernel
with CONFIG_PCI=n, then the relevant iomem mapping functions
[including ioremap(), devm_ioremap(), etc.] are not available.
Here let COMMON_CLK_FIXED_MMIO depend on HAS_IOMEM so that it won't
be built to cause below compiling error if PCI is unset:
------
ld: drivers/clk/clk-fixed-mmio.o: in function `fixed_mmio_clk_setup':
clk-fixed-mmio.c:(.text+0x5e): undefined reference to `of_iomap'
ld: clk-fixed-mmio.c:(.text+0xba): undefined reference to `iounmap'
------
Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202306211329.ticOJCSv-lkp@intel.com/ Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: linux-clk@vger.kernel.org Link: https://lore.kernel.org/r/20230707135852.24292-8-bhe@redhat.com Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
If the current task fails the check for the queried capability via
`capable(CAP_SYS_ADMIN)` LSMs like SELinux generate a denial message.
Issuing such denial messages unnecessarily can lead to a policy author
granting more privileges to a subject than needed to silence them.
Reorder CAP_SYS_ADMIN checks after the check whether the operation is
actually privileged.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
It is possible for dma_request_chan() to return EPROBE_DEFER, which
means acdev->host->dev is not ready yet. At this point dev_err() will
have no output. Use dev_err_probe() instead.
Signed-off-by: Minjie Du <duminjie@vivo.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version")
partially closed an IMA integrity issue when directly modifying a file
on the lower filesystem. If the overlay file is first opened by a user
and later the lower backing file is modified by root, but the extended
attribute is NOT updated, the signature validation succeeds with the old
original signature.
Update the super_block s_iflags to SB_I_IMA_UNVERIFIABLE_SIGNATURE to
force signature reevaluation on every file access until a fine grained
solution can be found.
[Why & How]
DMUB may hang when powering down pixel clocks due to no dprefclk.
It is fixed by exiting idle optimization before the attempt to access PHY.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Chen <sancchen@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
I've contacted the mainter of this repo and he gave me the "go ahead" to
send this patch to the maling list.
Signed-off-by: Konstantin Shelekhin <k.shelekhin@ftml.net> Link: https://lore.kernel.org/r/20230722155922.173856-1-k.shelekhin@ftml.net Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
HP Elite Dragonfly G2 (a convertible laptop/tablet) has a reliable VGBS
method. If VGBS is not called on boot, the firmware sends an initial
0xcd event shortly after calling the BTNL method, but only if the device
is booted in the laptop mode. However, if the device is booted in the
tablet mode and VGBS is not called, there is no initial 0xcc event, and
the input device for SW_TABLET_MODE is not registered up until the user
turns the device into the laptop mode.
Call VGBS on boot on this device to get the initial state of
SW_TABLET_MODE in a reliable way.
Tested with BIOS 1.13.1.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Link: https://lore.kernel.org/r/20230716183213.64173-1-maxtram95@gmail.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE
are only send after the BTNL ACPI method has been called.
Likely more devices need this, so make the BTNL ACPI method unconditional
instead of only doing it on devices with a 5 button array.
Note this also makes the intel_button_array_enable() call in probe()
unconditional, that function does its own priv->array check. This makes
the intel_button_array_enable() call in probe() consistent with the calls
done on suspend/resume which also rely on the priv->array check inside
the function.
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com> Closes: https://lore.kernel.org/platform-driver-x86/20230712175023.31651-1-maxtram95@gmail.com/ Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230715181516.5173-1-hdegoede@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The 8K sample parameter of 12.288Mhz main system bus clock doesn't work
because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2
series datasheet(I2SC Mode Register of Register Summary).
So use the 6.144Mhz instead of 12.288Mhz to support 8K sample.
When the system suspends, peripheral SDCA interrupts are disabled.
When system level resume is invoked, the peripheral SDCA interrupts
should be enabled to handle JD events.
Enable SDCA interrupts in resume sequence when ClockStop Mode0 is applied.
projects / thirdparty / kernel / stable.git / log
