zeertzjq [Thu, 13 Mar 2025 19:29:13 +0000 (20:29 +0100)]
patch 9.1.1200: cmdline pum not cleared for input() completion
Problem: Cmdline pum not cleared for input() completion.
Solution: Temporary reset RedrawingDisabled in cmdline_pum_cleanup(),
like what is done in wildmenu_cleanup() (zeertzjq).
fixes: #16874
closes: #16876
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Aurelien Gateau [Wed, 12 Mar 2025 22:16:42 +0000 (23:16 +0100)]
patch 9.1.1199: gvim uses hardcoded xpm icon file
Problem: Many X11/Wayland desktops support icon themes, and many themes
provide a gvim icon, but this icon is ignored for the window
itself because it is hardcoded in the source code.
Solution: Read the icon from the theme instead (Aurelien Gateau).
closes: #16859
Signed-off-by: Aurelien Gateau <mail@agateau.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.1198: [security]: potential data loss with zip.vim
Problem: [security]: potential data loss with zip.vim and special
crafted zip files (RyotaK)
Solution: use glob '[-]' to protect filenames starting with '-'
David Mandelberg [Wed, 12 Mar 2025 20:23:39 +0000 (21:23 +0100)]
patch 9.1.1196: filetype: config files for container tools are not recognized
Problem: filetype: config files for container tools are not recognized
Solution: detect the ones that aren't detected yet as toml filetype
(David Mandelberg)
The .containerignore format doesn't look exactly the same as gitignore,
but very close. And .dockerignore is already using gitignore.
I wasn't sure exactly how to interpret what containers.conf(5) was
saying about modules, so I looked at
https://github.com/containers/common/tree/main/pkg/config/testdata/modules
to get examples, and based the detection off those.
closes: #16852
Signed-off-by: David Mandelberg <david@mandelberg.org> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Wed, 12 Mar 2025 20:16:13 +0000 (21:16 +0100)]
runtime(doc): remove unnecessary "an"
"umask" is pronounce like "youmask", so having an "an" before it is a
bit strange. In other places in the help, "umask" is not preceded by
either "a" or "an", and sometimes preceded by "the".
Also, "Note" is usually followed either by ":" or "that" in builtin.txt,
so add a ":" after "Note".
closes: 16860
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Shane Harper [Wed, 12 Mar 2025 20:12:12 +0000 (21:12 +0100)]
patch 9.1.1195: inside try-block: fn body executed with default arg undefined
Problem: inside try-block: fn body executed when default arg is
undefined
Solution: When inside a try-block do not execute function body after an
error in evaluating a default argument expression
(Shane Harper).
closes: #16865
Signed-off-by: Shane Harper <shane@shaneharper.net> Signed-off-by: Christian Brabandt <cb@256bit.org>
Jim Zhou [Wed, 12 Mar 2025 19:57:24 +0000 (20:57 +0100)]
runtime(doc): Update doc 52.6
Problem: the highlight-yank plugin exmaple provided in the doc behaves
incorrectly when selection is set to exclusive.
Solution: use a unified offset of 1 and pass 'exclusive: false' to
getregionpos(), while at it, also clarify when the
TextYankPost autocommand triggers.
closes: #16866
Signed-off-by: Jim Zhou <jimzhouzzy@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Mon, 10 Mar 2025 20:30:29 +0000 (21:30 +0100)]
patch 9.1.1194: filetype: false positive help filetype detection
Problem: filetype: false positive help filetype detection
Solution: Only detect a file as help if modeline appears either at start
of line or is preceded by whitespace (zeertzjq).
closes: #16845
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
David Mandelberg [Mon, 10 Mar 2025 20:26:50 +0000 (21:26 +0100)]
runtime(man): improve :Man completion for man-db
On man-db systems, complete with actual man sections and pages, instead
of shell commands.
I tried to come up with a portable solution for multiple man
implementations in https://github.com/vim/vim/discussions/16794 but I
think the differences between implementations were too large to do that
without overly complicated code. So instead, I implemented it for man-db
(which I think is common on Linux) and hopefully left it easier for
other people to implement it on other systems in the future if they want
to.
closes: #16843
Signed-off-by: David Mandelberg <david@mandelberg.org> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Mon, 10 Mar 2025 20:15:19 +0000 (21:15 +0100)]
patch 9.1.1193: Unnecessary use of STRCAT() in au_event_disable()
Problem: Unnecessary use of STRCAT() in au_event_disable(). STRCAT()
seeks to the end of new_ei, but here the end is already known.
Solution: Use STRCPY() and add p_ei_len to new_ei. Also fix a typo in a
comment. Add a test that 'eventignore' works in :argdo
(zeertzjq).
closes: #16844
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.1192: Vim crashes with term response debug logging enabled
Problem: Vim crashes with term response debug logging enabled and
running in a non-writeable directory
Solution: use ch_log() instead of custom termresponse logging function
(Hirohito Higashi)
closes: #16840
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Doug Kearns [Sun, 9 Mar 2025 15:30:28 +0000 (16:30 +0100)]
runtime(vim): Update base-syntax and generator, only match valid predefined variables
- Only match valid predefined and option variables.
- Match scope dictionaries.
- Highlight scope prefixed variables as a scope dictionary accessor. The
vimVarScope syntax group can be linked to vimVar to disable this.
- Include support for Neovim-only predefined and option variables.
Temporary collateral damage - scope dictionaries match instead of keys
in dictionary literals.
closes: #16727
Signed-off-by: Doug Kearns <dougkearns@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
oreo639 [Sun, 9 Mar 2025 07:54:21 +0000 (08:54 +0100)]
patch 9.1.1189: if_python: build error due to incompatible pointer types
Problem: if_python: build error due to incompatible pointer types
Solution: cast pointer to PyObject* (oreo639)
Avoid build failure due to -Wincompatible-pointer-types becoming an error in
gcc 14.
When Py_LIMITED_API is < 0x030b0000, then the for Py_XDECREF must be PyObject*.
Vim targets Py_LIMITED_API = 0x03080000 (python 3.8).
closes: #16824
Signed-off-by: oreo639 <oreo6391@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
MuntasirSZN [Sun, 9 Mar 2025 07:49:14 +0000 (08:49 +0100)]
patch 9.1.1188: runtime(tera): tera support can be improved
Problem: runtime(tera): tera support can be improved
Solution: update tera filetype plugin, include a tera syntax script
include tera syntax tests, update the filetype test,
update makemenu and synmenu vim scripts
(MuntasirSZN)
closes: #16830
Signed-off-by: MuntasirSZN <muntasir.joypurhat@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.1187: matchparen plugin wrong highlights shell case statement
Problem: matchparen plugin wrong highlights shell case statement
(Swudu Susuwu)
Solution: return early, if we are in a shSnglCase syntax element
The shell syntax element "case $var in foobar)" uses closing parenthesis
but there is no corresponding opening parenthesis for that syntax
element. However matchparen is not aware of such things and will happily
try to match just the next opening parenthesis.
So let's just add a way to opt out for such cases. In this case, use the
syntax state to check if the closing parenthesis belongs to the syntax
item "shSnglCase" and if it is, do not try to find a corresponding
opening parenthesis.
Since inspecting the syntax state might be expensive, put the whole
check behind a filetype test, so that matchparen will only perform this
particular check, when it knows the current buffer is a "sh" filetype.
zeertzjq [Sun, 9 Mar 2025 07:38:35 +0000 (08:38 +0100)]
runtime(doc): use GNOME instead of Gnome
It's called "GNOME Terminal" in
https://gitlab.gnome.org/GNOME/gnome-terminal It's also called GNOME
Terminal in English Wikipedia
https://en.wikipedia.org/wiki/GNOME_Terminal and the Wikipedia pages of
8 other languages.
Also, make line wrapping the same in insert.txt and cmdline.txt.
closes: #16832
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.1186: filetype: help files in git repos are not detected
Problem: filetype: help files in git repos are not detected
Solution: detect */doc/*.txt files as help if they end with a help
modeline, even if 'modeline' is off
Here's how I checked that this would still detect vim's own help files
correctly:
runtime(syntax-tests): Improve parts of "runtest.vim"
* Accommodate the calling of "EraseLineAndReturnCarriage()"
to not interfere with the "skipped" and "failed" reports.
* Create the "failed" directory, if unavailable, without
relying on "VerifyScreenDump()" to do it so that reporting
with "Xtestscript#s:AssertCursorForwardProgress()" can be
uniformly attempted.
* Make an only list copy of the "Xtestscript" contents and
share it with every syntax test.
* Narrow the scope of the "filetype" and "failed_root" local
variables.
closes: #16789
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Sat, 8 Mar 2025 15:42:48 +0000 (16:42 +0100)]
patch 9.1.1184: Unnecessary use of vim_tolower() in vim_strnicmp_asc()
Problem: Unnecessary use of vim_tolower() in vim_strnicmp_asc().
Solution: Use TOLOWER_ASC() instead (zeertzjq).
It was passing *s1 and *s2 to vim_tolower(). When char is signed, which
is the case on most platforms, c < 0x80 is always true, so it already
behaves the same as TOLOWER_ASC().
closes: #16826
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
runtime(syntax-tests): Re-introduce support for "phoney" languages
As of patch v9.1.1176~1, there are no longer makeshift Make
targets to accommodate language names that can match phoney
targets. For example, "clean_" was previously generated for
Clean because otherwise it clashed with the "clean" target.
Additionally, enable test filtering for makeshift targets.
Reference:
https://wiki.clean.cs.ru.nl/Clean
closes: #16810
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Fri, 7 Mar 2025 18:09:09 +0000 (19:09 +0100)]
patch 9.1.1182: No cmdline completion for 'completefuzzycollect'
Problem: No cmdline completion for the 'completefuzzycollect' option
(after v9.1.1178)
Solution: Add cmdline completion for the 'completefuzzycollect' option,
improve its description in optwin.vim (zeertzjq).
closes: #16813
Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
zeertzjq [Fri, 7 Mar 2025 17:51:40 +0000 (18:51 +0100)]
patch 9.1.1180: short-description
Problem: The meaning of <Tab> depends on unspecified behavior
(after 9.1.1179).
Solution: Return TAB in case bsearch() finds K_TAB. Rename alt_name to
pref_name as that's closer to it meaning (zeertzjq).
The man page of bsearch() says:
The bsearch() function returns a pointer to a matching member of the
array, or NULL if no match is found. If there are multiple elements
that match the key, the element returned is unspecified.
So it's possible that bsearch() finds K_TAB instead of TAB when trying
to get the key code for <Tab>. Actually, it can happen when adding a
single key to end of the table:
Doug Kearns [Fri, 7 Mar 2025 17:49:11 +0000 (18:49 +0100)]
runtime(vim): Update base-syntax, bug fixes
- Allow trailing backslashes in option values.
- Match :map-special modifier.
- Match :map-arguments case-sensitively.
- Remove <*Leader> from map modifier list and allow in RHS of a mapping.
closes: #16822
Signed-off-by: Doug Kearns <dougkearns@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
John Marriott [Thu, 6 Mar 2025 21:26:23 +0000 (22:26 +0100)]
patch 9.1.1179: too many strlen() calls in misc2.c
Problem: too many strlen() calls in misc2.c
Solution: refactor misc2.c and use bsearch() instead of a linear search
to find matches in the key_names_table array (John Marriott).
This commit changes misc2.c to use bsearch() to perform string searches of
the key_names_table array.
Implementation detail:
- Some entries in this array have alternate names. Add field alt_name to
point to the alternate name.
- Some entries in this array are only available if a given feature is
defined. Keep them in the array, but add a boolean field enabled to
indicate if the record can be used or not. If the feature is not
available, the corresponding enabled field is set to FALSE.
In my measurements running the test suite on a huge non-gui build on
linux, the number of string comparisons in get_special_key_code():
Before (linear search): 2,214,957
After (binary search): 297,770
A side effect of this is 1477 calls to STRLEN() in
get_special_key_name() for the same test run are no longer necessary.
While we are here, refactor call_shell() and the mshape_names array to
remove some STRLEN() calls.
closes: #16788
Signed-off-by: John Marriott <basilisk@internode.on.net> Signed-off-by: Christian Brabandt <cb@256bit.org>
glepnir [Thu, 6 Mar 2025 20:59:13 +0000 (21:59 +0100)]
patch 9.1.1178: not possible to generate completion candidates using fuzzy matching
Problem: not possible to generate completion candidates using fuzzy
matching
Solution: add the 'completefuzzycollect' option for (some) ins-completion
modes (glepnir)
I tried to figure out what was the most common using modelines. Note
that there are 2401 vim files, and the numbers in the other command
outputs below add up to significantly less than that, so it's possible
that my estimate of what's most common is way off.
```
$ find . -name \*.vim | wc -l
2401
```
It looks like 2 is the most common value by far for shiftwidth and
softtabstop, so I used that for indent_size.
And expandtab is significantly more common than noexpandtab. Taking that
in combination with the common shiftwidth and softtabstop of 2 but
tabstop of 8, I set indent_style to space.
I did try to look at a few of the less common values for those options
to see if there was any obvious pattern, like all *.vim files in one
directory having a different setting. The only real pattern I noticed
was in runtime/pack/dist/opt/netrw, but that looks like it's imported
from a separate repository? So I think it might make more sense for them
to create their own .editorconfig file rather than putting settings for
that directory in this one.
closes: #16777
Signed-off-by: David Mandelberg <david@mandelberg.org> Signed-off-by: Christian Brabandt <cb@256bit.org>
Jim Zhou [Wed, 5 Mar 2025 19:47:29 +0000 (20:47 +0100)]
patch 9.1.1175: inconsistent behaviour with exclusive selection and motion commands
Problem: inconsistent behaviour with exclusive selection and motion
commands (aidancz)
Solution: adjust cursor position when selection is exclusive
(Jim Zhou)
fixes: #16278
closes: #16784
Co-authored-by: Hirohito Higashi <h.east.727@gmail.com> Co-authored-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Jim Zhou <jimzhouzzy@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
runtime(man): don't add jumps when loading a manpage
Without this change, pressing K while in one manpage to load another
one, then pressing CTRL-O to go back, results in going to the bottom of
the current (second) manpage. With this change, it goes back to the
previous manpage.
closes: #16791
Signed-off-by: David Mandelberg <david@mandelberg.org> Signed-off-by: Christian Brabandt <cb@256bit.org>
Jim Zhou [Wed, 5 Mar 2025 19:25:11 +0000 (20:25 +0100)]
patch 9.1.1174: tests: Test_complete_cmdline() may fail
Problem: tests: when the file 'TestCommand?Test' exists,
'Test_complete_cmdline()' will fail when writing the file. And
there's no related cleaning operation for this kind of file
before the test run.
Solution: modify `write` to `write!` to override (Jim Zhou).
closes: #16799
Signed-off-by: Jim Zhou <jimzhouzzy@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Girish Palya [Tue, 4 Mar 2025 19:56:30 +0000 (20:56 +0100)]
patch 9.1.1170: wildmenu highlighting in popup can be improved
Problem: wildmenu highlighting in popup can be improved
Solution: Check if the completion items contain submatches of the
entered text (Girish Palya).
This update enables highlighting in the popup menu even when the matched
fragment or pattern appears within an item (string) rather than only at the
beginning. This is especially useful for custom completion, where menu items
may not always start with the typed pattern.
For specific use cases, refer to the two examples in
https://github.com/vim/vim/pull/16759
A sliding window approach is used with direct string comparison. Performance
is not a concern, as highlighting is applied only to displayed lines, even if
the menu list is arbitrarily long.
closes: #16785
Signed-off-by: Girish Palya <girishji@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.1169: using global variable for get_insert()/get_lambda_name()
Problem: using global variable for get_insert()/get_lambda_name()
(after v9.1.1151)
Solution: let the functions return a string_T object instead
(Yee Cheng Chin)
In #16720, `get_insert()` was modified to store a string length in a
global variable to be queried immediately by another `get_insert_len()`
function, which is somewhat fragile. Instead, just have the function
itself return a `string_T` object instead. Also do the same for
`get_lambda_name()` which has similar issues.
closes: #16775
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Girish Palya [Mon, 3 Mar 2025 19:01:06 +0000 (20:01 +0100)]
patch 9.1.1168: wrong flags passed down to nextwild()
Problem: wrong flags passed down to nextwild()
(zeertzjq, after v9.1.1166)
Solution: only pass options flags (Girish Palya)
`options` needs to be passed into nextwild() since it may contain
WILD_KEEP_SOLE_ITEM which prevents the menu items list from getting
freed if there is only 1 item left (if `noselect` is set).
closes: #16778
Signed-off-by: Girish Palya <girishji@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Girish Palya [Sun, 2 Mar 2025 21:55:57 +0000 (22:55 +0100)]
patch 9.1.1166: command-line auto-completion hard with wildmenu
Problem: command-line auto-completion hard with wildmenu
Solution: implement "noselect" wildoption value (Girish Palya)
When `noselect` is present in `wildmode` and 'wildmenu' is enabled, the
completion menu appears without pre-selecting the first item.
This change makes it easier to implement command-line auto-completion,
where the menu dynamically appears as characters are typed, and `<Tab>`
can be used to manually select an item. This can be achieved by
leveraging the `CmdlineChanged` event to insert `wildchar(m)`,
triggering completion menu.
Without this change, auto-completion using the 'wildmenu' mechanism is
not feasible, as it automatically inserts the first match, preventing
dynamic selection.
The following Vimscript snippet demonstrates how to configure
auto-completion using `noselect`:
def CmdComplete(cur_cmdline: string, timer: number)
var [cmdline, curpos] = [getcmdline(), getcmdpos()]
if cur_cmdline ==# cmdline # Avoid completing each character in keymaps and pasted text
&& !pumvisible() && curpos == cmdline->len() + 1
if cmdline[curpos - 2] =~ '[\w*/:]' # Reduce noise by completing only selected characters
feedkeys("\<C-@>", "ti")
set eventignore+=CmdlineChanged # Suppress redundant completion attempts
timer_start(0, (_) => {
getcmdline()->substitute('\%x00$', '', '')->setcmdline() # Remove <C-@> if no completion items exist
set eventignore-=CmdlineChanged
})
endif
endif
enddef
```
fixes: #16551
closes: #16759
Signed-off-by: Girish Palya <girishji@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.1165: diff: regression with multi-file diff blocks
Problem: Vim's diff block merging algorithm when doing a multi-file diff
is buggy when two different diff hunks overlap a single
existing diff block (after v9.1.0743)
Solution: fix a couple bugs in this logic:
1. Fix regression from v9.1.0743 where it's not correctly expanding the
2nd overlap correctly, where it always expands without taking into
account that this was always taken care of when the first overlap
happened. Instead, we should only grow the 2nd overlap if it overhangs
outside the existing diff block, and if we encounter a new overlapping
diff block (due to overlap chaining).
2. When we expand a diff block to match the hunk size on the orig side
(when handling the first overlap), we expand the same amount of lines
in the new side. This is not sound if there exists a second overlap
hunk that we haven't processed yet, and that hunk has different
number of lines in orig/new. Fix this by doing the corresponding
counter adjustment when handling 2nd/3rd/etc overlap by calculating
the difference in lines between orig and new side.
(Yee Cheng Chin)
closes: #16768
Signed-off-by: Yee Cheng Chin <ychin.git@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
patch 9.1.1164: [security]: code execution with tar.vim and special crafted tar files
Problem: editing a special crafted tar file allows code execution
(RyotaK, after 129a8446d23cd9cb4445fcfea259cba5e0487d29)
Solution: escape the filename before feeding it to the `:read` command
Problem: $MYVIMDIR is set too late and not available while sourcing
runtime files (Maxim Kim, after v9.1.1159)
Solution: Also set it when $MYVIMRC file is found
runtime(syntax-tests): Apply stronger synchronisation between buffers
The current lightweight synchronisation with ":redraw" needs further
reinforcement in the light of v9.1.1110. And, with v9.1.0820, make
another synchronisation point _before_ the first (or only) screenful is
dumped.
Also add a script to regenerate all screendumps.
closes: #16632
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
glepnir [Sat, 1 Mar 2025 15:17:00 +0000 (16:17 +0100)]
patch 9.1.1162: completion popup not cleared in cmdline
Problem: When an info popup spans into the cmdline area and ESC is
pressed, some content remains visible on screen (yu3s)
Solution: Add popup_overlays_cmdline() check in screen_fill() to prevent
prematurely clearing the clear_cmdline flag (glepnir).
fixes: #15627
closes: #16765
Signed-off-by: glepnir <glephunter@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
glepnir [Sat, 1 Mar 2025 15:12:23 +0000 (16:12 +0100)]
patch 9.1.1161: preinsert requires bot "menu" and "menuone" to be set
Problem: preinsert requires bot "menu" and "menuone" to be set,
but "menu" is redundant (after v9.1.1160)
Solution: preinsert only requires menuone (glepnir)
closes: #16763
Signed-off-by: glepnir <glephunter@gmail.com> Signed-off-by: zeertzjq <zeertzjq@outlook.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
glepnir [Fri, 28 Feb 2025 16:43:42 +0000 (17:43 +0100)]
patch 9.1.1160: Ctrl-Y does not work well with "preinsert" when completing items
Problem: The 'preinsert' feature requires Ctrl-Y to confirm insertion,
but Ctrl-Y only works when the popup menu (pum) is displayed.
Without enforcing this dependency, it could lead to confusing
behavior or non-functional features.
Solution: Modify ins_compl_has_preinsert() to check for both 'menu' and
'menuone' flags when 'preinsert' is set. Update documentation
to clarify this requirement. This avoids adding complex
conditional behaviors. (glepnir)
fixes: #16728
closes: #16753
Signed-off-by: glepnir <glephunter@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: $MYVIMDIR may not always be set (after 9.1.0718)
(sandwm)
Solution: always set $MYVIMDIR to first item in runtimepath
(except when using --clean), update it when changing &rtp
Doug Kearns [Thu, 27 Feb 2025 18:17:33 +0000 (19:17 +0100)]
runtime(lua): Improve 'include' and make '*expr' functions script-local
- Prevent 'include' from matching variable assignments as calls to
require() and others.
- Use script-local functions for 'includeexpr' and 'foldexpr'.
- Formatting fixes.
closes: #16746
Signed-off-by: Doug Kearns <dougkearns@gmail.com> Signed-off-by: Christian Brabandt <cb@256bit.org>
John Marriott [Tue, 25 Feb 2025 19:56:38 +0000 (20:56 +0100)]
patch 9.1.1151: too many strlen() calls in getchar.c
Problem: too many strlen() calls in getchar.c
Solution: store last inserted and recorded lengths,
add functions to retrieve those and use those
functions (John Marriott)
closes: #16720
Signed-off-by: John Marriott <basilisk@internode.on.net> Signed-off-by: Christian Brabandt <cb@256bit.org>
projects / thirdparty / vim.git / log
