In the case of fast device addition/removal, it's possible that
hv_eject_device_work() can start to run before create_root_hv_pci_bus()
starts to run; as a result, the pci_get_domain_bus_and_slot() in
hv_eject_device_work() can return a 'pdev' of NULL, and
hv_eject_device_work() can remove the 'hpdev', and immediately send a
message PCI_EJECTION_COMPLETE to the host, and the host immediately
unassigns the PCI device from the guest; meanwhile,
create_root_hv_pci_bus() and the PCI device driver can be probing the
dead PCI device and reporting timeout errors.
Fix the issue by adding a per-bus mutex 'state_lock' and grabbing the
mutex before powering on the PCI bus in hv_pci_enter_d0(): when
hv_eject_device_work() starts to run, it's able to find the 'pdev' and call
pci_stop_and_remove_bus_device(pdev): if the PCI device driver has
loaded, the PCI device driver's probe() function is already called in
create_root_hv_pci_bus() -> pci_bus_add_devices(), and now
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able
to call the PCI device driver's remove() function and remove the device
reliably; if the PCI device driver hasn't loaded yet, the function call
hv_eject_device_work() -> pci_stop_and_remove_bus_device() is able to
remove the PCI device reliably and the PCI device driver's probe()
function won't be called; if the PCI device driver's probe() is already
running (e.g., systemd-udev is loading the PCI device driver), it must
be holding the per-device lock, and after the probe() finishes and releases
the lock, hv_eject_device_work() -> pci_stop_and_remove_bus_device() is
able to proceed to remove the device reliably.
Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615044451.5580-6-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the host tries to remove a PCI device, the host first sends a
PCI_EJECT message to the guest, and the guest is supposed to gracefully
remove the PCI device and send a PCI_EJECTION_COMPLETE message to the host;
the host then sends a VMBus message CHANNELMSG_RESCIND_CHANNELOFFER to
the guest (when the guest receives this message, the device is already
unassigned from the guest) and the guest can do some final cleanup work;
if the guest fails to respond to the PCI_EJECT message within one minute,
the host sends the VMBus message CHANNELMSG_RESCIND_CHANNELOFFER and
removes the PCI device forcibly.
In the case of fast device addition/removal, it's possible that the PCI
device driver is still configuring MSI-X interrupts when the guest receives
the PCI_EJECT message; the channel callback calls hv_pci_eject_device(),
which sets hpdev->state to hv_pcichild_ejecting, and schedules a work
hv_eject_device_work(); if the PCI device driver is calling
pci_alloc_irq_vectors() -> ... -> hv_compose_msi_msg(), we can break the
while loop in hv_compose_msi_msg() due to the updated hpdev->state, and
leave data->chip_data with its default value of NULL; later, when the PCI
device driver calls request_irq() -> ... -> hv_irq_unmask(), the guest
crashes in hv_arch_irq_unmask() due to data->chip_data being NULL.
Fix the issue by not testing hpdev->state in the while loop: when the
guest receives PCI_EJECT, the device is still assigned to the guest, and
the guest has one minute to finish the device removal gracefully. We don't
really need to (and we should not) test hpdev->state in the loop.
Fixes: de0aa7b2f97d ("PCI: hv: Fix 2 hang issues in hv_compose_msi_msg()") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615044451.5580-3-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The statement "the hv_pci_bus_exit() call releases structures of all its
child devices" in commit d6af2ed29c7c is not true: in the path
hv_pci_probe() -> hv_pci_enter_d0() -> hv_pci_bus_exit(hdev, true): the
parameter "keep_devs" is true, so hv_pci_bus_exit() does *not* release the
child "struct hv_pci_dev *hpdev" that is created earlier in
pci_devices_present_work() -> new_pcichild_device().
The commit d6af2ed29c7c was originally made in July 2020 for RHEL 7.7,
where the old version of hv_pci_bus_exit() was used; when the commit was
rebased and merged into the upstream, people didn't notice that it's
not really necessary. The commit itself doesn't cause any issue, but it
makes hv_pci_probe() more complicated. Revert it to facilitate some
upcoming changes to hv_pci_probe().
Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Wei Hu <weh@microsoft.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615044451.5580-5-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since day 1 of the driver, there has been a race between
hv_pci_query_relations() and survey_child_resources(): during fast
device hotplug, hv_pci_query_relations() may error out due to
device-remove and the stack variable 'comp' is no longer valid;
however, pci_devices_present_work() -> survey_child_resources() ->
complete() may be running on another CPU and accessing the no-longer-valid
'comp'. Fix the race by flushing the workqueue before we exit from
hv_pci_query_relations().
Fixes: 4daace0d8ce8 ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs") Signed-off-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Acked-by: Lorenzo Pieralisi <lpieralisi@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230615044451.5580-2-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
vmbus_wait_for_unload() may be called in the panic path after other
CPUs are stopped. vmbus_wait_for_unload() currently loops through
online CPUs looking for the UNLOAD response message. But the values of
CONFIG_KEXEC_CORE and crash_kexec_post_notifiers affect the path used
to stop the other CPUs, and in one of the paths the stopped CPUs
are removed from cpu_online_mask. This removal happens in both
x86/x64 and arm64 architectures. In such a case, vmbus_wait_for_unload()
only checks the panic'ing CPU, and misses the UNLOAD response message
except when the panic'ing CPU is CPU 0. vmbus_wait_for_unload()
eventually times out, but only after waiting 100 seconds.
Fix this by looping through *present* CPUs in vmbus_wait_for_unload().
The cpu_present_mask is not modified by stopping the other CPUs in the
panic path, nor should it be.
Also, in a CoCo VM the synic_message_page is not allocated in
hv_synic_alloc(), but is set and cleared in hv_synic_enable_regs()
and hv_synic_disable_regs() such that it is set only when the CPU is
online. If not all present CPUs are online when vmbus_wait_for_unload()
is called, the synic_message_page might be NULL. Add a check for this.
Fixes: cd95aad55793 ("Drivers: hv: vmbus: handle various crash scenarios") Cc: stable@vger.kernel.org Reported-by: John Starks <jostarks@microsoft.com> Signed-off-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Link: https://lore.kernel.org/r/1684422832-38476-1-git-send-email-mikelley@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 572086325ce9 ("Drivers: hv: vmbus: Cleanup synic memory free path")
says "Any memory allocations that succeeded will be freed when the caller
cleans up by calling hv_synic_free()", but if the get_zeroed_page() in
hv_synic_alloc() fails, currently hv_synic_free() is not really called
in vmbus_bus_init(), consequently there will be a memory leak, e.g.
hv_context.hv_numa_map is not freed in the error path. Fix this by
updating the goto labels.
Cc: stable@kernel.org Signed-off-by: Dexuan Cui <decui@microsoft.com> Fixes: 4df4cb9e99f8 ("x86/hyperv: Initialize clockevents earlier in CPU onlining") Reviewed-by: Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20230504224155.10484-1-decui@microsoft.com Signed-off-by: Wei Liu <wei.liu@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We run into guest hang in edk2 firmware when KSM is kept as running on
the host. The edk2 firmware is waiting for status 0x80 from QEMU's pflash
device (TYPE_PFLASH_CFI01) during the operation of sector erasing or
buffered write. The status is returned by reading the memory region of
the pflash device and the read request should have been forwarded to QEMU
and emulated by it. Unfortunately, the read request is covered by an
illegal stage2 mapping when the guest hang issue occurs. The read request
is completed with QEMU bypassed and wrong status is fetched. The edk2
firmware runs into an infinite loop with the wrong status.
The illegal stage2 mapping is populated due to same page sharing by KSM
at (C) even the associated memory slot has been marked as invalid at (B)
when the memory slot is requested to be deleted. It's notable that the
active and inactive memory slots can't be swapped when we're in the middle
of kvm_mmu_notifier_change_pte() because kvm->mn_active_invalidate_count
is elevated, and kvm_swap_active_memslots() will busy loop until it reaches
to zero again. Besides, the swapping from the active to the inactive memory
slots is also avoided by holding &kvm->srcu in __kvm_handle_hva_range(),
corresponding to synchronize_srcu_expedited() in kvm_swap_active_memslots().
Fix the issue by skipping the invalid memory slot at (C) to avoid the
illegal stage2 mapping so that the read request for the pflash's status
is forwarded to QEMU and emulated by it. In this way, the correct pflash's
status can be returned from QEMU to break the infinite loop in the edk2
firmware.
We tried a git-bisect and the first problematic commit is cd4c71835228 ("
KVM: arm64: Convert to the gfn-based MMU notifier callbacks"). With this,
clean_dcache_guest_page() is called after the memory slots are iterated
in kvm_mmu_notifier_change_pte(). clean_dcache_guest_page() is called
before the iteration on the memory slots before this commit. This change
literally enlarges the racy window between kvm_mmu_notifier_change_pte()
and memory slot removal so that we're able to reproduce the issue in a
practical test case. However, the issue exists since commit d5d8184d35c9
("KVM: ARM: Memory virtualization setup").
Cc: stable@vger.kernel.org # v3.9+ Fixes: d5d8184d35c9 ("KVM: ARM: Memory virtualization setup") Reported-by: Shuai Hu <hshuai@redhat.com> Reported-by: Zhenyu Zhang <zhenyzha@redhat.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Message-Id: <20230615054259.14911-1-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The addition of might_sleep() to down_timeout() caused the latter to
enable interrupts unconditionally in some cases, which in turn broke
the ACPI S3 wakeup path in acpi_suspend_enter(), where down_timeout()
is called by acpi_disable_all_gpes() via acpi_ut_acquire_mutex().
Namely, if CONFIG_DEBUG_ATOMIC_SLEEP is set, might_sleep() causes
might_resched() to be used and if CONFIG_PREEMPT_VOLUNTARY is set,
this triggers __cond_resched() which may call preempt_schedule_common(),
so __schedule() gets invoked and it ends up with enabled interrupts (in
the prev == next case).
Now, enabling interrupts early in the S3 wakeup path causes the kernel
to crash.
Address this by modifying acpi_suspend_enter() to disable GPEs without
attempting to acquire the sleeping lock which is not needed in that code
path anyway.
Fixes: 99409b935c9a ("locking/semaphore: Add might_sleep() to down_*() family") Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As a result of analysis of a syzbot report, it turned out that in three
cases where nilfs2 allocates block device buffers directly via sb_getblk,
concurrent reads to the device can corrupt the allocated buffers.
Nilfs2 uses sb_getblk for segment summary blocks, that make up a log
header, and the super root block, that is the trailer, and when moving and
writing the second super block after fs resize.
In any of these, since the uptodate flag is not set when storing metadata
to be written in the allocated buffers, the stored metadata will be
overwritten if a device read of the same block occurs concurrently before
the write. This causes metadata corruption and misbehavior in the log
write itself, causing warnings in nilfs_btree_assign() as reported.
Fix these issues by setting an uptodate flag on the buffer head on the
first or before modifying each buffer obtained with sb_getblk, and
clearing the flag on failure.
When setting the uptodate flag, the lock_buffer/unlock_buffer pair is used
to perform necessary exclusive control, and the buffer is filled to ensure
that uninitialized bytes are not mixed into the data read from others. As
for buffers for segment summary blocks, they are filled incrementally, so
if the uptodate flag was unset on their allocation, set the flag and zero
fill the buffer once at that point.
Also, regarding the superblock move routine, the starting point of the
memset call to zerofill the block is incorrectly specified, which can
cause a buffer overflow on file systems with block sizes greater than
4KiB. In addition, if the superblock is moved within a large block, it is
necessary to assume the possibility that the data in the superblock will
be destroyed by zero-filling before copying. So fix these potential
issues as well.
When commit 19343b5bdd16 ("mm/page-writeback: introduce tracepoint for
wait_on_page_writeback()") repurposed the writeback_dirty_page trace event
as a template to create its new wait_on_page_writeback trace event, it
ended up opening a window to NULL pointer dereference crashes due to the
(infrequent) occurrence of a race where an access to a page in the
swap-cache happens concurrently with the moment this page is being written
to disk and the tracepoint is enabled:
This problem arises from the fact that the repurposed writeback_dirty_page
trace event code was written assuming that every pointer to mapping
(struct address_space) would come from a file-mapped page-cache object,
thus mapping->host would always be populated, and that was a valid case
before commit 19343b5bdd16. The swap-cache address space
(swapper_spaces), however, doesn't populate its ->host (struct inode)
pointer, thus leading to the crashes in the corner-case aforementioned.
commit 19343b5bdd16 ended up breaking the assignment of __entry->name and
__entry->ino for the wait_on_page_writeback tracepoint -- both dependent
on mapping->host carrying a pointer to a valid inode. The assignment of
__entry->name was fixed by commit 68f23b89067f ("memcg: fix a crash in
wb_workfn when a device disappears"), and this commit fixes the remaining
case, for __entry->ino.
It looks like this test was broken in v6.1 after the backport of commit 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests").
It was not working because the commit ad3493746ebe ("selftests: mptcp:
add test-cases for mixed v4/v6 subflows") is not in v6.1. This commit
changes how the connections are being created in mptcp_join.sh selftest:
with IPv6 support always enabled. But then in v6.1, the server still
create IPv4 only connections, so without the v4-mapped-v6 format with
the "::ffff:" prefix like we have in v6.3.
The modification here adds a support for connections created in v4 as
well so it fixes the issue in v6.1. This patch is not needed for the
selftests in v6.3 because only IPv6 listening sockets are being created.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the MP_FAIL / infinite mapping introduced
by commit 1e39e5a32ad7 ("mptcp: infinite mapping sending") and the
following ones.
It is possible to look for one of the infinite mapping counters to know
in advance if the this feature is available.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the userspace PM introduced by commit 4638de5aefe5 ("mptcp: handle local addrs announced by userspace PMs")
and the following ones.
It is possible to look for the MPTCP pm_type's sysctl knob to know in
advance if the userspace PM is available.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Some tests are using IPTables and/or TC commands to force some
behaviours. If one of these commands fails -- likely because some
features are not available due to missing kernel config -- we should
intercept the error and skip the tests requiring these features.
Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.
This patch also replaces the 'exit 1' by 'return 1' not to stop the
selftest in the middle without the conclusion if there is an issue with
NF or TC.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is TCP_INQ cmsg support introduced in commit 2c9e77659a0c
("mptcp: add TCP_INQ cmsg support").
It is possible to look for "mptcp_ioctl" in kallsyms because it was
needed to introduce the mentioned feature. We can skip these tests and
not set TCPINQ option if the feature is not supported.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the listen diag dump support introduced by
commit 4fa39b701ce9 ("mptcp: listen diag dump support").
It looks like there is no good pre-check to do here, i.e. dedicated
function available in kallsyms. Instead, we try to get info if nothing
is returned, the test is marked as skipped.
That's not ideal because something could be wrong with the feature and
instead of reporting an error, the test could be marked as skipped. If
we know in advanced that the feature is supposed to be supported, the
tester can set SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var to 1: in
this case the test will report an error instead of marking the test as
skipped if nothing is returned.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of sending an MP_PRIO signal for the initial
subflow, introduced by commit c157bbe776b7 ("mptcp: allow the in kernel
PM to set MPC subflow priority").
It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the fullmesh flag for the in-kernel PM
introduced by commit 2843ff6f36db ("mptcp: remote addresses fullmesh")
and commit 1a0d6136c5f0 ("mptcp: local addresses fullmesh").
It looks like there is no easy external sign we can use to predict the
expected behaviour. We could add the flag and then check if it has been
added but for that, and for each fullmesh test, we would need to setup a
new environment, do the checks, clean it and then only start the test
from yet another clean environment. To keep it simple and avoid
introducing new issues, we look for a specific kernel version. That's
not ideal but an acceptable solution for this case.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Commit bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint")
has simplified the way the backup flag is set on an endpoint. Instead of
doing:
./pm_nl_ctl set 10.0.2.1 flags backup
Now we do:
./pm_nl_ctl set id 1 flags backup
The new way is easier to maintain but it is also incompatible with older
kernels not supporting the implicit endpoints putting in place the
infrastructure to set flags per ID, hence the second Fixes tag.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: bccefb762439 ("selftests: mptcp: simplify pm_nl_change_endpoint") Cc: stable@vger.kernel.org Fixes: 4cf86ae84c71 ("mptcp: strict local address ID selection") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of the implicit endpoints introduced by
commit d045b9eb95a9 ("mptcp: introduce implicit endpoints").
It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.
Note that here and in the following commits, we re-do the same check for
each sub-test of the same function for a few reasons. The main one is
not to break the ID assign to each test in order to be able to easily
compare results between different kernel versions. Also, we can still
run a specific test even if it is skipped. Another reason is that it
makes it clear during the review that a specific subtest will be skipped
or not under certain conditions. At the end, it looks OK to call the
exact same helper multiple times: it is not a critical path and it is
the same code that is executed, not really more cases to maintain.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a UAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.
It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of MP_FASTCLOSE introduced in commit f284c0c77321 ("mptcp: implement fastclose xmit path").
If the MIB counter is not available, the test cannot be verified and the
behaviour will not be the expected one. So we can skip the test if the
counter is missing.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
At some points, a new feature caused internal behaviour changes we are
verifying in the selftests, see the Fixes tag below. It was not a uAPI
change but because in these selftests, we check some internal
behaviours, it is normal we have to adapt them from time to time after
having added some features.
It is possible to look for "mptcp_pm_subflow_check_next" in kallsyms
because it was needed to introduce the mentioned feature. So we can know
in advance what the behaviour we are expecting here instead of
supporting the two behaviours.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP MIB counters introduced in commit fc518953bc9c
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.
If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added to do the required checks and
return an error if the counter is not available.
Note that if we expect to have these features available and if
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, the tests
will be marked as failed instead of skipped.
This new helper also makes sure we get the exact counter we want to
avoid issues we had in the past, e.g. with MPTcpExtRmAddr and
MPTcpExtRmAddrDrop sharing the same prefix. While at it, we uniform the
way we fetch a MIB counter.
Note for the backports: we rarely change these modified blocks so if
there is are conflicts, it is very likely because a counter is not used
in the older kernels and we don't need that chunk.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
Here are some helpers that will be used to mark subtests as skipped if a
feature is not supported. Marking as a fix for the commit introducing
this selftest to help with the backports.
While at it, also check if kallsyms feature is available as it will also
be used in the following commits to check if MPTCP features are
available before starting a test.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
A new function is now available to easily detect if a feature is
missing by looking at the kernel version. That's clearly not ideal and
this kind of check should be avoided as soon as possible. But sometimes,
there are no external sign that a "feature" is available or not:
internal behaviours can change without modifying the uAPI and these
selftests are verifying the internal behaviours. Sometimes, the only
(easy) way to verify if the feature is present is to run the test but
then the validation cannot determine if there is a failure with the
feature or if the feature is missing. Then it looks better to check the
kernel version instead of having tests that can never fail. In any case,
we need a solution not to have a whole selftest being marked as failed
just because one sub-test has failed.
Note that this env var car be set to 1 not to do such check and run the
linked sub-test: SELFTESTS_MPTCP_LIB_NO_KVERSION_CHECK.
This new helper is going to be used in the following commits. In order
to ease the backport of such future patches, it would be good if this
patch is backported up to the introduction of MPTCP selftests, hence the
Fixes tag below: this type of check was supposed to be done from the
beginning.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit 55c42fa7fa33 ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.
It is possible to look for "mptcp_diag_fill_info" in kallsyms because
it is introduced by the mentioned feature. So we can know in advance if
the feature is supported and skip the sub-test if not.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit 55c42fa7fa33 ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.
We cannot guess in advance which sizes the kernel will returned: older
kernel can returned smaller sizes, e.g. recently the tcp_info structure
has been modified in commit 71fc704768f6 ("tcp: add rcv_wnd and
plb_rehash to TCP_INFO") where a new field has been added.
The userspace can also expect a smaller size if it is compiled with old
uAPI kernel headers.
So for these sizes, we can only check if they are above a certain
threshold, 0 for the moment. We can also only compared sizes with the
ones set by the kernel.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the fullmesh flag that can be given to the MPTCP
in-kernel path-manager and introduced in commit 2843ff6f36db ("mptcp:
remote addresses fullmesh").
If the flag is not visible in the dump after having set it, we don't
check the content. Note that if we expect to have this feature and
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, we always
check the content to avoid regressions.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the checks of the default limits returned by the MPTCP
in-kernel path-manager. The default values have been modified by commit 72bcbc46a5c3 ("mptcp: increase default max additional subflows to 2").
Instead of comparing with hardcoded values, we can get the default one
and compare with them.
Note that if we expect to have the latest version, we continue to check
the hardcoded values to avoid unexpected behaviour changes.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of IP(V6)_TRANSPARENT socket option with
MPTCP connections introduced by commit c9406a23c116 ("mptcp: sockopt:
add SOL_IP freebind & transparent options").
It is possible to look for "__ip_sock_set_tos" in kallsyms because
IP(V6)_TRANSPARENT socket option support has been added after TOS
support which came with the required infrastructure in MPTCP sockopt
code. To support TOS, the following function has been exported (T). Not
great but better than checking for a specific kernel version.
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
New functions are now available to easily detect if a certain feature is
missing by looking at kallsyms.
These new helpers are going to be used in the following commits. In
order to ease the backport of such future patches, it would be good if
this patch is backported up to the introduction of MPTCP selftests,
hence the Fixes tag below: this type of check was supposed to be done
from the beginning.
Most of the code had an issue according to ShellCheck.
That's mainly due to the fact it incorrectly believes most of the code
was unreachable because it's invoked by variable name, see how the
"tests" array is used.
Once SC2317 has been ignored, three small warnings were still visible:
- SC2155: Declare and assign separately to avoid masking return values.
- SC2046: Quote this to prevent word splitting: can be ignored because
"ip netns pids" can display more than one pid.
- SC2166: Prefer [ p ] || [ q ] as [ p -o q ] is not well defined.
This probably didn't fix any actual issues but it might help spotting
new interesting warnings reported by ShellCheck as just before,
ShellCheck was reporting issues for most lines making it a bit useless.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mptcp_connect tool was printing some duplicated entries when showing how
to use it: -j -l -r
While at it, I also:
- moved the very few entries that were not sorted,
- added -R that was missing since
commit 8a4b910d005d ("mptcp: selftests: add rcvbuf set option"),
- removed the -u parameter that has been removed in
commit f730b65c9d85 ("selftests: mptcp: try to set mptcp ulp mode in different sk states").
No need to backport this, it is just an internal tool used by our
selftests. The help menu is mainly useful for MPTCP kernel devs.
Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tick period is aligned very early while the first clock_event_device is
registered. At that point the system runs in periodic mode and switches
later to one-shot mode if possible.
The next wake-up event is programmed based on the aligned value
(tick_next_period) but the delta value, that is used to program the
clock_event_device, is computed based on ktime_get().
With the subtracted offset, the device fires earlier than the exact time
frame. With a large enough offset the system programs the timer for the
next wake-up and the remaining time left is too small to make any boot
progress. The system hangs.
Move the alignment later to the setup of tick_sched timer. At this point
the system switches to oneshot mode and a high resolution clocksource is
available. At this point it is safe to align tick_next_period because
ktime_get() will now return accurate (not jiffies based) time.
[bigeasy: Patch description + testing].
Fixes: e9523a0d81899 ("tick/common: Align tick period with the HZ tick.") Reported-by: Mathias Krause <minipli@grsecurity.net> Reported-by: "Bhatnagar, Rishabh" <risbhat@amazon.com> Suggested-by: Mathias Krause <minipli@grsecurity.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Richard W.M. Jones <rjones@redhat.com> Tested-by: Mathias Krause <minipli@grsecurity.net> Acked-by: SeongJae Park <sj@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/5a56290d-806e-b9a5-f37c-f21958b5a8c0@grsecurity.net Link: https://lore.kernel.org/12c6f9a3-d087-b824-0d05-0d18c9bc1bf3@amazon.com Link: https://lore.kernel.org/r/20230615091830.RxMV2xf_@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch validate session id and tree id in compound request.
If first operation in the compound is SMB2 ECHO request, ksmbd bypass
session and tree validation. So work->sess and work->tcon could be NULL.
If secound request in the compound access work->sess or tcon, It cause
NULL pointer dereferecing error.
Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21165 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ksmbd_smb2_check_message doesn't validate hdr->NextCommand. If
->NextCommand is bigger than Offset + Length of smb2 write, It will
allow oversized smb2 write length. It will cause OOB read in smb2_write.
Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-21164 Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
->StructureSize2 indicates command payload size. ksmbd should validate
this size with rfc1002 length before accessing it.
This patch remove unneeded check and add the validation for this.
Pluton is an integrated security processor present in some recent Ryzen
parts. If it's enabled, it presents two devices - an MSFT0101 ACPI device
that's broadly an implementation of a Command Response Buffer TPM2, and an
MSFT0200 ACPI device whose functionality I haven't examined in detail yet.
This patch only attempts to add support for the TPM device.
There's a few things that need to be handled here. The first is that the
TPM2 ACPI table uses a previously undefined start method identifier. The
table format appears to include 16 bytes of startup data, which corresponds
to one 64-bit address for a start message and one 64-bit address for a
completion response. The second is that the ACPI tables on the Thinkpad Z13
I'm testing this on don't define any memory windows in _CRS (or, more
accurately, there are two empty memory windows). This check doesn't seem
strictly necessary, so I've skipped that.
Finally, it seems like chip needs to be explicitly asked to transition into
ready status on every command. Failing to do this means that if two
commands are sent in succession without an idle/ready transition in
between, everything will appear to work fine but the response is simply the
original command. I'm working without any docs here, so I'm not sure if
this is actually the required behaviour or if I'm missing something
somewhere else, but doing this results in the chip working reliably.
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Cc: "Limonciello, Mario" <mario.limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Writing the TPM_INT_STATUS register in the interrupt handler to clear the
interrupts only has effect if a locality is held. Since this is not
guaranteed at the time the interrupt is fired, claim the locality
explicitly in the handler.
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com> Tested-by: Michael Niewöhner <linux@mniewoehner.de> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are several issues with copy_from_user_nofault():
- access_ok() is designed for user context only and for that reason
it has WARN_ON_IN_IRQ() which triggers when bpf, kprobe, eprobe
and perf on ppc are calling it from irq.
- it's missing nmi_uaccess_okay() which is a nop on all architectures
except x86 where it's required.
The comment in arch/x86/mm/tlb.c explains the details why it's necessary.
Calling copy_from_user_nofault() from bpf, [ke]probe without this check is not safe.
- __copy_from_user_inatomic() under CONFIG_HARDENED_USERCOPY is calling
check_object_size()->__check_object_size()->check_heap_object()->find_vmap_area()->spin_lock()
which is not safe to do from bpf, [ke]probe and perf due to potential deadlock.
Fix all three issues. At the end the copy_from_user_nofault() becomes
equivalent to copy_from_user_nmi() from safety point of view with
a difference in the return value.
When an ATA port is resumed from sleep, the port is reset and a power
management request issued to libata EH to reset the port and rescanning
the device(s) attached to the port. Device rescanning is done by
scheduling an ata_scsi_dev_rescan() work, which will execute
scsi_rescan_device().
However, scsi_rescan_device() takes the generic device lock, which is
also taken by dpm_resume() when the SCSI device is resumed as well. If
a device rescan execution starts before the completion of the SCSI
device resume, the rcu locking used to refresh the cached VPD pages of
the device, combined with the generic device locking from
scsi_rescan_device() and from dpm_resume() can cause a deadlock.
Avoid this situation by changing struct ata_port scsi_rescan_task to be
a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is
modified to check if the SCSI device associated with the ATA device that
must be rescanned is not suspended. If the SCSI device is still
suspended, ata_scsi_dev_rescan() returns early and reschedule itself for
execution after an arbitrary delay of 5ms.
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by: Joe Breuer <linux-kernel@jmbreuer.net> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530 Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Joe Breuer <linux-kernel@jmbreuer.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
LS1028A is using DMA with LPUART. Having RX watermark set to 1, means
DMA transactions are started only after receiving the second character.
On other platforms with newer LPUART IP, Receiver Idle Empty function
initiates the DMA request after the receiver is idling for 4 characters.
But this feature is missing on LS1028A, which is causing a 1-character
delay in the RX direction on this platform.
Set RX watermark to 0 to initiate RX DMA after each character.
[Why]
When the PSR enabled. If you try to adjust the timing parameters,
it may cause system hang. Because the timing mismatch with the
DMCUB settings.
[How]
Disable the PSR before adjusting timing parameters.
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why & How]
This commit is part of a sequence of changes that replaces the commit
sequence used in the DC with a new one. As a result of this transition,
we moved some specific parts from the commit sequence and brought them
to amdgpu_dm. This commit adds a wrapper inside DM that enable our
drivers to do any necessary preparation or change before we offload the
plane/stream update to DC.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: ea2062dd1f03 ("drm/amd/display: fix the system hang while disable PSR") Signed-off-by: Sasha Levin <sashal@kernel.org>
[Why & How]
The old dc_commit_updates_for_stream lacks manipulation for many corner
cases where the DC feature requires special attention; as a result, it
starts to show its limitation (e.g., the SubVP feature is not supported
by it, among other cases). To modernize and unify our internal API, this
commit replaces the old dc_commit_updates_for_stream with
dc_update_planes_and_stream, which has more features.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: ea2062dd1f03 ("drm/amd/display: fix the system hang while disable PSR") Signed-off-by: Sasha Levin <sashal@kernel.org>
as-instr uses KBUILD_AFLAGS, but as-option uses KBUILD_CFLAGS. This can
cause as-option to fail unexpectedly when CONFIG_WERROR is set, because
clang will emit -Werror,-Wunused-command-line-argument for various -m
and -f flags in KBUILD_CFLAGS for assembler sources.
Callers of as-option and as-instr should be adding flags to
KBUILD_AFLAGS / aflags-y, not KBUILD_CFLAGS / cflags-y. Use
KBUILD_AFLAGS in all macros to clear up the initial problem.
Unfortunately, -Wunused-command-line-argument can still be triggered
with clang by the presence of warning flags or macro definitions because
'-x assembler' is used, instead of '-x assembler-with-cpp', which will
consume these flags. Switch to '-x assembler-with-cpp' in places where
'-x assembler' is used, as the compiler is always used as the driver for
out of line assembler sources in the kernel.
Finally, add -Werror to these macros so that they behave consistently
whether or not CONFIG_WERROR is set.
[nathan: Reworded and expanded on problems in commit message
Use '-x assembler-with-cpp' in a couple more places]
A future change will switch as-option to use KBUILD_AFLAGS instead of
KBUILD_CFLAGS to allow clang to drop -Qunused-arguments, which may cause
issues if the flag being tested requires a flag previously added to
KBUILD_CFLAGS but not KBUILD_AFLAGS. Use cc-option for cflags additions
so that the flags are tested properly.
Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MIPS: Move '-Wa,-msoft-float' check from as-option to cc-option
This patch is for linux-6.1.y and earlier, it has no direct mainline
equivalent.
In order to backport commit d5c8d6e0fa61 ("kbuild: Update assembler
calls to use proper flags and language target") to resolve a separate
issue regarding PowerPC, the problem noticed and fixed by
commit 80a20d2f8288 ("MIPS: Always use -Wa,-msoft-float and eliminate
GAS_HAS_SET_HARDFLOAT") needs to be addressed. Unfortunately, 6.1 and
earlier do not contain commit e4412739472b ("Documentation: raise
minimum supported version of binutils to 2.25"), so it cannot be assumed
that all supported versions of GNU as have support for -msoft-float.
In order to switch from KBUILD_CFLAGS to KBUILD_AFLAGS in as-option
without consequence, move the '-Wa,-msoft-float' check to cc-option,
including '$(cflags-y)' directly to avoid the issue mentioned in
commit 80a20d2f8288 ("MIPS: Always use -Wa,-msoft-float and eliminate
GAS_HAS_SET_HARDFLOAT").
as-option tests new options using KBUILD_CFLAGS, which causes problems
when using as-option to update KBUILD_AFLAGS because many compiler
options are not valid assembler options.
This will be fixed in a follow up patch. Before doing so, move the
assembler test for -Wa,-mrelax-relocations=no from using as-option to
cc-option.
In the error exits in target_setup_session(), if a branch is taken to
free_sess: transport_free_session() may call to target_free_cmd_counter()
and then fall through to call target_free_cmd_counter() a second time.
This can, and does, sometimes cause seg faults since the data field in
cmd_cnt->refcnt has been freed in the first call.
Fix this problem by simply returning after the call to
transport_free_session(). The second call is redundant for those cases.
Fixes: 4edba7e4a8f3 ("scsi: target: Move cmd counter allocation") Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Link: https://lore.kernel.org/r/20230613144259.12890-1-rpearsonhpe@gmail.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
neigh_lookup_nodev isn't used in the kernel after removal
of DECnet. So let's remove it.
Fixes: 1202cdd66531 ("Remove DECnet support from kernel") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/eb5656200d7964b2d177a36b77efa3c597d6d72d.1678267343.git.leonro@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In my previous commit 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG
to report tc extact message") I didn't notice the tc action use different
enum with filter. So we can't use TCA_EXT_WARN_MSG directly for tc action.
Let's add a TCA_ROOT_EXT_WARN_MSG for tc action specifically and put this
param before going to the TCA_ACT_TAB nest.
Fixes: 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is not a correct fix as TCA_EXT_WARN_MSG is not a hierarchy to
TCA_ACT_TAB. I didn't notice the TC actions use different enum when adding
TCA_EXT_WARN_MSG. To fix the difference I will add a new WARN enum in
TCA_ROOT_MAX as Jamal suggested.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
TCA_EXT_WARN_MSG is currently sitting outside of the expected hierarchy
for the tc actions code. It should sit within TCA_ACT_TAB.
Fixes: 0349b8779cc9 ("sched: add new attr TCA_EXT_WARN_MSG to report tc extact message") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't set struct drm_driver.output_poll_changed. It's used to restore
the fbdev console. But as amdgpu uses generic fbdev emulation, the
console is being restored by the DRM client helpers already. See the
functions drm_kms_helper_hotplug_event() and
drm_kms_helper_connector_hotplug_event() in drm_probe_helper.c.
Memory passed to kvfree_rcu() that is to be freed is tracked by a
per-CPU kfree_rcu_cpu structure, which in turn contains pointers
to kvfree_rcu_bulk_data structures that contain pointers to memory
that has not yet been handed to RCU, along with an kfree_rcu_cpu_work
structure that tracks the memory that has already been handed to RCU.
These structures track three categories of memory: (1) Memory for
kfree(), (2) Memory for kvfree(), and (3) Memory for both that arrived
during an OOM episode. The first two categories are tracked in a
cache-friendly manner involving a dynamically allocated page of pointers
(the aforementioned kvfree_rcu_bulk_data structures), while the third
uses a simple (but decidedly cache-unfriendly) linked list through the
rcu_head structures in each block of memory.
On a given CPU, these three categories are handled as a unit, with that
CPU's kfree_rcu_cpu_work structure having one pointer for each of the
three categories. Clearly, new memory for a given category cannot be
placed in the corresponding kfree_rcu_cpu_work structure until any old
memory has had its grace period elapse and thus has been removed. And
the kfree_rcu_monitor() function does in fact check for this.
Except that the kfree_rcu_monitor() function checks these pointers one
at a time. This means that if the previous kfree_rcu() memory passed
to RCU had only category 1 and the current one has only category 2, the
kfree_rcu_monitor() function will send that current category-2 memory
along immediately. This can result in memory being freed too soon,
that is, out from under unsuspecting RCU readers.
To see this, consider the following sequence of events, in which:
o Task A on CPU 0 calls rcu_read_lock(), then uses "from_cset",
then is preempted.
o CPU 1 calls kfree_rcu(cset, rcu_head) in order to free "from_cset"
after a later grace period. Except that "from_cset" is freed
right after the previous grace period ended, so that "from_cset"
is immediately freed. Task A resumes and references "from_cset"'s
member, after which nothing good happens.
In full detail:
CPU 0 CPU 1
---------------------- ----------------------
count_memcg_event_mm()
|rcu_read_lock() <---
|mem_cgroup_from_task()
|// css_set_ptr is the "from_cset" mentioned on CPU 1
|css_set_ptr = rcu_dereference((task)->cgroups)
|// Hard irq comes, current task is scheduled out.
cgroup_attach_task()
|cgroup_migrate()
|cgroup_migrate_execute()
|css_set_move_task(task, from_cset, to_cset, true)
|cgroup_move_task(task, to_cset)
|rcu_assign_pointer(.., to_cset)
|...
|cgroup_migrate_finish()
|put_css_set_locked(from_cset)
|from_cset->refcount return 0
|kfree_rcu(cset, rcu_head) // free from_cset after new gp
|add_ptr_to_bulk_krc_lock()
|schedule_delayed_work(&krcp->monitor_work, ..)
kfree_rcu_monitor()
|krcp->bulk_head[0]'s work attached to krwp->bulk_head_free[]
|queue_rcu_work(system_wq, &krwp->rcu_work)
|if rwork->rcu.work is not in WORK_STRUCT_PENDING_BIT state,
|call_rcu(&rwork->rcu, rcu_work_rcufn) <--- request new gp
// There is a perious call_rcu(.., rcu_work_rcufn)
// gp end, rcu_work_rcufn() is called.
rcu_work_rcufn()
|__queue_work(.., rwork->wq, &rwork->work);
|kfree_rcu_work()
|krwp->bulk_head_free[0] bulk is freed before new gp end!!!
|The "from_cset" is freed before new gp end.
// the task resumes some time later.
|css_set_ptr->subsys[(subsys_id) <--- Caused kernel crash, because css_set_ptr is freed.
This commit therefore causes kfree_rcu_monitor() to refrain from moving
kfree_rcu() memory to the kfree_rcu_cpu_work structure until the RCU
grace period has completed for all three categories.
v2: Use helper function instead of inserted code block at kfree_rcu_monitor().
Fixes: 34c881745549 ("rcu: Support kfree_bulk() interface in kfree_rcu()") Fixes: 5f3c8d620447 ("rcu/tree: Maintain separate array for vmalloc ptrs") Reported-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Ziwei Dai <ziwei.dai@unisoc.com> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Tested-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We define sp and ipsw in <asm/asmregs.h> using ".reg", and when using
current binutils (snapshot 2.40.50.20230611) the definitions in
<asm/assembly.h> using "=" conflict with those:
arch/parisc/include/asm/assembly.h: Assembler messages:
arch/parisc/include/asm/assembly.h:93: Error: symbol `sp' is already defined
arch/parisc/include/asm/assembly.h:95: Error: symbol `ipsw' is already defined
Delete the duplicate definitions in <asm/assembly.h>.
Also delete the definition of gp, which isn't used anywhere.
In the same spirit as commit ca57f02295f1 ("afs: Fix fileserver probe
RTT handling"), don't rule out using a vlserver just because there
haven't been enough packets yet to calculate a real rtt. Always set the
server's probe rtt from the estimate provided by rxrpc_kernel_get_srtt,
which is capped at 1 second.
This could lead to EDESTADDRREQ errors when accessing a cell for the
first time, even though the vl servers are known and have responded to a
probe.
Fixes: 1d4adfaf6574 ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity") Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org Link: http://lists.infradead.org/pipermail/linux-afs/2023-June/006746.html Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Previously, timestamps were printed using "%lld.%u" which is incorrect
for nanosecond values lower than 100,000,000 as they're fractional
digits, therefore leading zeros are meaningful.
This patch changes the format strings to "%lld.%09u" in order to add
leading zeros to the nanosecond value.
Fixes: 568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program") Fixes: 4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility") Fixes: 6ab0e475f1f3 ("Documentation: fix misc. warnings") Signed-off-by: Alex Maftei <alex.maftei@amd.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20230615083404.57112-1-alex.maftei@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
According to nla_parse_nested_deprecated(), the tb[] is supposed to the
destination array with maxtype+1 elements. In current
tipc_nl_media_get() and __tipc_nl_media_set(), a larger array is used
which is unnecessary. This patch resize them to a proper size.
Fixes: 1e55417d8fc6 ("tipc: add media set to new netlink api") Fixes: 46f15c6794fb ("tipc: add media get/dump to new netlink api") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Florian Westphal <fw@strlen.de> Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Link: https://lore.kernel.org/r/20230614120604.1196377-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
As described in commit 38d11da522aa ("dm: don't lock fs when the map is
NULL in process of resume"), a deadlock may be triggered between
do_resume() and do_mount().
This commit preserves the fix from commit 38d11da522aa but moves it to
where it also serves to fix a similar deadlock between do_suspend()
and do_mount(). It does so, if the active map is NULL, by clearing
DM_SUSPEND_LOCKFS_FLAG in dm_suspend() which is called by both
do_suspend() and do_resume().
Fixes: 38d11da522aa ("dm: don't lock fs when the map is NULL in process of resume") Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In systems without MSI-X capabilities, xdp_txq_queues_mode is calculated
in efx_allocate_msix_channels, but when enabling MSI-X fails, it was not
changed to a proper default value. This was leading to the driver
thinking that it has dedicated XDP queues, when it didn't.
Fix it by setting xdp_txq_queues_mode to the correct value if the driver
fallbacks to MSI or legacy IRQ mode. The correct value is
EFX_XDP_TX_QUEUES_BORROWED because there are no XDP dedicated queues.
The issue can be easily visible if the kernel is started with pci=nomsi,
then a call trace is shown. It is not shown only with sfc's modparam
interrupt_mode=2. Call trace example:
WARNING: CPU: 2 PID: 663 at drivers/net/ethernet/sfc/efx_channels.c:828 efx_set_xdp_channels+0x124/0x260 [sfc]
[...skip...]
Call Trace:
<TASK>
efx_set_channels+0x5c/0xc0 [sfc]
efx_probe_nic+0x9b/0x15a [sfc]
efx_probe_all+0x10/0x1a2 [sfc]
efx_pci_probe_main+0x12/0x156 [sfc]
efx_pci_probe_post_io+0x18/0x103 [sfc]
efx_pci_probe.cold+0x154/0x257 [sfc]
local_pci_probe+0x42/0x80
Fixes: 6215b608a8c4 ("sfc: last resort fallback for lack of xdp tx queues") Reported-by: Yanghang Liu <yanghliu@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and
macsec->stats on some of the memory allocation failure paths. However, the
net_device is already registered to that moment: in macsec_newlink(), just
before calling macsec_add_dev(). This means that during unregister process
its priv_destructor - macsec_free_netdev() - will be called and will free
the stats again.
Remove freeing percpu stats inside macsec_add_dev() because
macsec_free_netdev() will correctly free the already allocated ones. The
pointers to unallocated stats stay NULL, and free_percpu() treats that
correctly.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support") Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The DEV_MAC_MAXLEN_CFG register contains a 16-bit value - up to 65535.
Plus 2 * VLAN_HLEN (4), that is up to 65543.
The picos_per_byte variable is the largest when "speed" is lowest -
SPEED_10 = 10. In that case it is (1000000L * 8) / 10 = 800000.
Their product - 52434400000 - exceeds 32 bits, which is a problem,
because apparently, a multiplication between two 32-bit factors is
evaluated as 32-bit before being assigned to a 64-bit variable.
In fact it's a problem for any MTU value larger than 5368.
Cast one of the factors of the multiplication to u64 to force the
multiplication to take place on 64 bits.
Issue found by Coverity.
Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230613170907.2413559-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a new chain is added by using tc, one soft lockup alarm will be
generated after delete the prio 0 filter of the chain. To reproduce
the problem, perform the following steps:
(1) tc qdisc add dev eth0 root handle 1: htb default 1
(2) tc chain add dev eth0
(3) tc filter del dev eth0 chain 0 parent 1: prio 0
(4) tc filter add dev eth0 chain 0 parent 1:
Fix the issue by accounting for additional reference to chains that are
explicitly created by RTM_NEWCHAIN message as opposed to implicitly by
RTM_NEWTFILTER message.
Fixes: 726d061286ce ("net: sched: prevent insertion of new classifiers during chain flush") Reported-by: Mingshuai Ren <renmingshuai@huawei.com> Closes: https://lore.kernel.org/lkml/87legswvi3.fsf@nvidia.com/T/ Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Link: https://lore.kernel.org/r/20230612093426.2867183-1-vladbu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
A recent patch added a call to ext4_error() which is problematic since
some callers of the ext4_get_group_info() function may be holding a
spinlock, whereas ext4_error() must never be called in atomic context.
This triggered a report from Syzbot: "BUG: sleeping function called from
invalid context in ext4_update_super" (see the link below).
Therefore, drop the call to ext4_error() from ext4_get_group_info(). In
the meantime use eight characters tabs instead of nine characters ones.
Reported-by: syzbot+4acc7d910e617b360859@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/00000000000070575805fdc6cdb2@google.com/ Fixes: 5354b2af3406 ("ext4: allow ext4_get_group_info() to fail") Suggested-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Link: https://lore.kernel.org/r/20230614100446.14337-1-fmdefrancesco@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
umount can race with lease break so need to check if
tcon->ses->server is still valid to send the lease
break response.
Reviewed-by: Bharath SM <bharathsm@microsoft.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Fixes: 59a556aebc43 ("SMB3: drop reference to cfile before sending oplock break") Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Setting the IPv6 address generation mode of a net device during its
creation never worked, but after commit b0ad3c179059 ("rtnetlink: call
validate_linkmsg in rtnl_create_link") it explicitly fails [1]. The
failure is caused by the fact that validate_linkmsg() is called before
the net device is registered, when it still does not have an 'inet6_dev'.
Likewise, raising the net device before setting the address generation
mode is meaningless, because by the time the mode is set, the address
has already been generated.
Therefore, fix the test to first create the net device, then set its
IPv6 address generation mode and finally bring it up.
[1]
# ip link add name mydev addrgenmode eui64 type dummy
RTNETLINK answers: Address family not supported by protocol
Fixes: ba95e7930957 ("selftests: forwarding: hw_stats_l3: Add a new test") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/f3b05d85b2bc0c3d6168fe8f7207c6c8365703db.1686580046.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized
in ingress_init() to point to net_device::miniq_ingress. ingress Qdiscs
access this per-net_device pointer in mini_qdisc_pair_swap(). Similar
for clsact Qdiscs and miniq_egress.
Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER
requests (thanks Hillf Danton for the hint), when replacing ingress or
clsact Qdiscs, for example, the old Qdisc ("@old") could access the same
miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"),
causing race conditions [1] including a use-after-free bug in
mini_qdisc_pair_swap() reported by syzbot:
@old and @new should not affect each other. In other words, @old should
never modify miniq_{in,e}gress after @new, and @new should not update
@old's RCU state.
Fixing without changing sch_api.c turned out to be difficult (please
refer to Closes: for discussions). Instead, make sure @new's first call
always happen after @old's last call (in {ingress,clsact}_destroy()) has
finished:
In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests,
and call qdisc_destroy() for @old before grafting @new.
Introduce qdisc_refcount_dec_if_one() as the counterpart of
qdisc_refcount_inc_nz() used for filter requests. Introduce a
non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check,
just like qdisc_put() etc.
Depends on patch "net/sched: Refactor qdisc_graft() for ingress and
clsact Qdiscs".
[1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under
TC_H_ROOT (no longer possible after commit c7cfbd115001 ("net/sched:
sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8
transmission queues:
Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2),
then adds a flower filter X to A.
Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and
b2) to replace A, then adds a flower filter Y to B.
Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to
its mini Qdisc, b1. Then, A calls mini_qdisc_pair_swap() again during
ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress
packets on eth0 will not find filter Y in sch_handle_ingress().
This is just one of the possible consequences of concurrently accessing
miniq_{in,e}gress pointers.
Fixes: 7a096d579e8e ("net: sched: ingress: set 'unlocked' flag for Qdisc ops") Fixes: 87f373921c4e ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops") Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/ Cc: Hillf Danton <hdanton@sina.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
We will report extack message if there is an error via netlink_ack(). But
if the rule is not to be exclusively executed by the hardware, extack is not
passed along and offloading failures don't get logged.
In commit 81c7288b170a ("sched: cls: enable verbose logging") Marcelo
made cls could log verbose info for offloading failures, which helps
improving Open vSwitch debuggability when using flower offloading.
It would also be helpful if userspace monitor tools, like "tc monitor",
could log this kind of message, as it doesn't require vswitchd log level
adjusment. Let's add a new tc attributes to report the extack message so
the monitor program could receive the failures. e.g.
# tc monitor
added chain dev enp3s0f1np1 parent ffff: chain 0
added filter dev enp3s0f1np1 ingress protocol all pref 49152 flower chain 0 handle 0x1
ct_state +trk+new
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1
Warning: mlx5_core: matching on ct_state +new isn't supported.
In this patch I only report the extack message on add/del operations.
It doesn't look like we need to report the extack message on get/dump
operations.
Note this message not only reporte to multicast groups, it could also
be reported unicast, which may affect the current usersapce tool's behaivor.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230113034353.2766735-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 84ad0af0bccd ("net/sched: qdisc_destroy() old ingress and clsact Qdiscs before grafting") Signed-off-by: Sasha Levin <sashal@kernel.org>
Setting very small value of db like 10ms introduces rounding errors when
converting to/from jiffies on some kernel configs. For example, on 250hz
the actual value will be set to 12ms which causes the test to fail:
# $ sudo ./tdc.py -d eth2 -e 3410
# -- ns/SubPlugin.__init__
# Test 3410: Create SFB with db setting
#
# All test results:
#
# 1..1
# not ok 1 3410 - Create SFB with db setting
# Could not match regex pattern. Verify command output:
# qdisc sfb 1: root refcnt 2 rehash 600s db 12ms limit 1000p max 25p target 20p increment 0.000503548 decrement 4.57771e-05 penalty_rate 10pps penalty_burst 20p
Set the value to 100ms instead which currently seem to work on 100hz,
250hz, 300hz and 1000hz kernel configs.
Fixes: 6ad92dc56fca ("selftests/tc-testing: add selftests for sfb qdisc") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Pointer nv_encoder could be dereferenced at nouveau_connector.c
in case it's equal to NULL by jumping to goto label.
This patch adds a NULL-check to avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 3195c5f9784a ("drm/nouveau: set encoder for lvds") Signed-off-by: Natalia Petrova <n.petrova@fintech.ru> Reviewed-by: Lyude Paul <lyude@redhat.com>
[Fixed patch title] Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512103320.82234-1-n.petrova@fintech.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
Add checking for NULL before calling nouveau_connector_detect_depth() in
nouveau_connector_get_modes() function because nv_connector->native_mode
could be dereferenced there since connector pointer passed to
nouveau_connector_detect_depth() and the same value of
nv_connector->native_mode is used there.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d4c2c99bdc83 ("drm/nouveau/dp: remove broken display depth function, use the improved one") Signed-off-by: Natalia Petrova <n.petrova@fintech.ru> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230512111526.82408-1-n.petrova@fintech.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
Fixes: cea86c5bb442 ("drm/bridge: ti-sn65dsi86: Implement the pwm_chip") Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230608012443.839372-1-suhui@nfschina.com Signed-off-by: Sasha Levin <sashal@kernel.org>
The call site of nouveau_dsm_pci_probe() uses single set of output
variables for all invocations. So, we must not write anything to them
unless it's an NVIDIA device. Otherwise, if we are called with another
device after the NVIDIA device, we'll clober the result of the NVIDIA
device.
For example, if the other device doesn't have _PR3 resources, the
detection later would miss the presence of power resource support, and
the rest of the code will keep using Optimus DSM, breaking power
management for that machine.
Also, because we're detecting NVIDIA's DSM, it doesn't make sense to run
this detection on a non-NVIDIA device anyway. Thus, check at the
beginning of the detection code if this is an NVIDIA card, and just
return if it isn't.
This, together with commit d22915d22ded ("drm/nouveau/devinit/tu102-:
wait for GFW_BOOT_PROGRESS == COMPLETED") developed independently and
landed earlier, fixes runtime power management of the NVIDIA card in
Lenovo Legion 5-15ARH05. Without this patch, the GPU resumption code
will "timeout", sometimes hanging userspace.
As a bonus, we'll also stop preventing _PR3 usage from the bridge for
unrelated devices, which is always nice, I guess.
Q-USGMII is a derivative of USGMII, that uses a specific formatting for
the control word. The layout is close to the USXGMII control word, but
doesn't support speeds over 1Gbps. Use a dedicated decoding logic for
the USGMII control word, re-using USXGMII definitions but only considering
10/100/1000Mbps speeds
Fixes: 5e61fe157a27 ("net: phy: Introduce QUSGMII PHY mode") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Q-USGMII is the quad port version of USGMII, and supports a max speed of
1Gbps on each line. Make so that phylink_interface_max_speed() reports
this information correctly.
Fixes: ae0e4bb2a0e0 ("net: phylink: Adjust link settings based on rate matching") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Guarantee that when probe() is run again, PTM and PCI busmaster will be
in the same state as it was if the driver was never loaded.
Avoid an i225/i226 hardware issue that PTM requests can be made even
though PCI bus mastering is not enabled. These unexpected PTM requests
can crash some systems.
So, "force" disable PTM and busmastering before removing the driver,
so they can be re-enabled in the right order during probe(). This is
more like a workaround and should be applicable for i225 and i226, in
any platform.
Fixes: 1b5d73fb8624 ("igc: Enable PCIe PTM") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There could be a race condition during link down where interrupt
being generated and igc_clean_tx_irq() been called to perform the
TX completion. Properly clear the TX buffer/descriptor ring and
disable the TX Queue ring in igc_free_tx_resources() to avoid that.
Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The sctp_sf_eat_auth() function is supposed to enum sctp_disposition
values and returning a kernel error code will cause issues in the
caller. Change -ENOMEM to SCTP_DISPOSITION_NOMEM.
Fixes: 65b07e5d0d09 ("[SCTP]: API updates to suport SCTP-AUTH extensions.") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Acked-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The commit 59a0b022aa24 ("ipvlan: Make skb->skb_iif track skb->dev for l3s
mode") fixed ipvlan bonded dev checking by updating skb skb_iif. This fix
works for IPv4, as in raw_v4_input() the dif is from inet_iif(skb), which
is skb->skb_iif when there is no route.
But for IPv6, the fix is not enough, because in ipv6_raw_deliver() ->
raw_v6_match(), the dif is inet6_iif(skb), which is returns IP6CB(skb)->iif
instead of skb->skb_iif if it's not a l3_slave. To fix the IPv6 part
issue. Let's set IP6CB(skb)->iif to correct ifindex.
BTW, ipvlan handles NS/NA specifically. Since it works fine, I will not
reset IP6CB(skb)->iif when addr->atype is IPVL_ICMPV6.
Fixes: c675e06a98a4 ("ipvlan: decouple l3s mode dependencies from other modes") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2196710 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When compiling YNL generated code compiler complains about
array-initializer-out-of-bounds. Turns out the MAX value
for STATS_GRP uses the value for STATS.
This may lead to random corruptions in user space (kernel
itself doesn't use this value as it never parses stats).
Fixes: f09ea6fb1272 ("ethtool: add a new command for reading standard stats") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ib_isert module is releasing the isert connection both in
isert_wait_conn() handler as well as isert_free_conn() handler.
In isert_wait_conn() handler, it is expected to wait for iSCSI
session logout operation to complete. It should free the isert
connection only in isert_free_conn() handler.
When a bunch of iSER target is cleared, this issue can lead to
use-after-free memory issue as isert conn is twice released
When ib_isert module receives connection error event, it is
releasing the isert session and removes corresponding list
node but it doesn't take appropriate mutex lock to remove
the list node. This can lead to linked list corruption
projects / thirdparty / kernel / stable.git / log
