Linus Torvalds [Tue, 17 Feb 2026 18:07:13 +0000 (10:07 -0800)]
Merge tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
Linus Torvalds [Tue, 17 Feb 2026 17:36:43 +0000 (09:36 -0800)]
Merge tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
Linus Torvalds [Tue, 17 Feb 2026 17:30:52 +0000 (09:30 -0800)]
Merge tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial driver updates from Greg KH:
"Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor
tweaks and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
Revert "tty: tty_port: add workqueue to flip TTY buffer"
tty: tty_port: add workqueue to flip TTY buffer
serial: 8250_pci: Remove custom deprecated baud setting routine
serial: 8250_omap: Remove custom deprecated baud setting routine
dt-bindings: serial: renesas,scif: Document RZ/G3L SoC
serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists
tty: hvc-iucv: Remove KMSG_COMPONENT macro
dt-bindings: serial: google,goldfish-tty: Convert to DT schema
dt-bindings: serial: sh-sci: Fold single-entry compatibles into enum
serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done
serial: 8250: 8250_omap.c: Add support for handling UART error conditions
serial: SH_SCI: improve "DMA support" prompt
serial: Kconfig: fix ordering of entries for menu display
serial: 8250: fix ordering of entries for menu display
serial: imx: change SERIAL_IMX_CONSOLE to bool
8250_men_mcb: drop unneeded MODULE_ALIAS
serial: men_z135_uart: drop unneeded MODULE_ALIAS
dt-bindings: serial: renesas,rsci: Document RZ/V2H(P) and RZ/V2N SoCs
serial: rsci: Convert to FIELD_MODIFY()
dt-bindings: serial: 8250: add SpacemiT K3 UART compatible
...
Linus Torvalds [Tue, 17 Feb 2026 17:20:58 +0000 (09:20 -0800)]
Merge tag 'staging-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 7.0-rc1. Well, not
that big, just lots of tiny coding style cleanups primarily in one
driver as everyone seems to have glomed onto it for some reason that
escapes me (is there a tutorial out there somewhere pointing people at
this?)
Not much overall, the changes can be summarized as:
- cleanups for the rtl8723bs driver, so many cleanups...
- vme_user driver cleanups
- sm750fb driver cleanups
- tiny greybus driver cleanups
- other really small staging driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (119 commits)
staging: rtl8723bs: refactor ODM_SetIQCbyRFpath to reduce duplication
staging: rtl8723bs: rename CamelCase function Set_MSR to set_msr
staging: rtl8723bs: remove unnecessary blank lines in rtw_io.c
staging: rtl8723bs: remove stale TODO item regarding %pM
staging: rtl8723bs: remove unused allocation wrapper functions
staging: rtl8723bs: use standard skb allocation APIs
staging: rtl8723bs: replace rtw_zmalloc() with kzalloc()
staging: rtl8723bs: replace rtw_malloc() with kmalloc()
staging: rtl8723bs: introduce kmemdup() where applicable
staging: sm750fb: Clean up variable names
staging: rtl8723bs: fix null dereference in find_network
staging: rtl8723bs: use unaligned access macros in rtw_security.c
staging: rtl8723bs: fix potential race in expire_timeout_chk
staging: rtl8723bs: remove dead debugging code in rtw_mlme_ext.c
staging: rtl8723bs: modernize hex output in rtw_report_sec_ie
staging: rtl8723bs: fix spacing around operators
staging: rtl8723bs: rename u1bTmp to val
staging: rtl8723bs: remove unused private debug counters
staging: rtl8723bs: remove thread wraper functions and add IS_ERR() check
staging: rtl8723bs: fix firmware memory leak on error
...
Linus Torvalds [Tue, 17 Feb 2026 17:11:04 +0000 (09:11 -0800)]
Merge tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
Linus Torvalds [Tue, 17 Feb 2026 16:48:45 +0000 (08:48 -0800)]
Merge tag 'block-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull more block updates from Jens Axboe:
- Fix partial IOVA mapping cleanup in error handling
- Minor prep series ignoring discard return value, as
the inline value is always known
- Ensure BLK_FEAT_STABLE_WRITES is set for drbd
- Fix leak of folio in bio_iov_iter_bounce_read()
- Allow IOC_PR_READ_* for read-only open
- Another debugfs deadlock fix
- A few doc updates
* tag 'block-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
blk-mq: use NOIO context to prevent deadlock during debugfs creation
blk-stat: convert struct blk_stat_callback to kernel-doc
block: fix enum descriptions kernel-doc
block: update docs for bio and bvec_iter
block: change return type to void
nvmet: ignore discard return value
md: ignore discard return value
block: fix partial IOVA mapping cleanup in blk_rq_dma_map_iova
block: fix folio leak in bio_iov_iter_bounce_read()
block: allow IOC_PR_READ_* ioctls with BLK_OPEN_READ
drbd: always set BLK_FEAT_STABLE_WRITES
Linus Torvalds [Tue, 17 Feb 2026 16:33:49 +0000 (08:33 -0800)]
Merge tag 'io_uring-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull more io_uring updates from Jens Axboe:
"This is a mix of cleanups and fixes. No major fixes in here, just a
bunch of little fixes. Some of them marked for stable as it fixes
behavioral issues
- Fix an issue with SOCKET_URING_OP_SETSOCKOPT for netlink sockets,
due to a too restrictive check on it having an ioctl handler
- Remove a redundant SQPOLL check in ring creation
- Kill dead accounting for zero-copy send, which doesn't use ->buf
or ->len post the initial setup
- Fix missing clamp of the allocation hint, which could cause
allocations to fall outside of the range the application asked
for. Still within the allowed limits.
- Fix for IORING_OP_PIPE's handling of direct descriptors
- Tweak to the API for the newly added BPF filters, making them
more future proof in terms of how applications deal with them
- A few fixes for zcrx, fixing a few error handling conditions
- Fix for zcrx request flag checking
- Add support for querying the zcrx page size
- Improve the NO_SQARRAY static branch inc/dec, avoiding busy
conditions causing too much traffic
- Various little cleanups"
* tag 'io_uring-7.0-20260216' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring/bpf_filter: pass in expected filter payload size
io_uring/bpf_filter: move filter size and populate helper into struct
io_uring/cancel: de-unionize file and user_data in struct io_cancel_data
io_uring/rsrc: improve regbuf iov validation
io_uring: remove unneeded io_send_zc accounting
io_uring/cmd_net: fix too strict requirement on ioctl
io_uring: delay sqarray static branch disablement
io_uring/query: add query.h copyright notice
io_uring/query: return support for custom rx page size
io_uring/zcrx: check unsupported flags on import
io_uring/zcrx: fix post open error handling
io_uring/zcrx: fix sgtable leak on mapping failures
io_uring: use the right type for creds iteration
io_uring/openclose: fix io_pipe_fixed() slot tracking for specific slots
io_uring/filetable: clamp alloc_hint to the configured alloc range
io_uring/rsrc: replace reg buffer bit field with flags
io_uring/zcrx: improve types for size calculation
io_uring/tctx: avoid modifying loop variable in io_ring_add_registered_file
io_uring: simplify IORING_SETUP_DEFER_TASKRUN && !SQPOLL check
Jens Axboe [Tue, 10 Feb 2026 17:00:44 +0000 (10:00 -0700)]
io_uring/bpf_filter: pass in expected filter payload size
It's quite possible that opcodes that have payloads attached to them,
like IORING_OP_OPENAT/OPENAT2 or IORING_OP_SOCKET, that these paylods
can change over time. For example, on the openat/openat2 side, the
struct open_how argument is extensible, and could be extended in the
future to allow further arguments to be passed in.
Allow registration of a cBPF filter to give the size of the filter as
seen by userspace. If that filter is for an opcode that takes extra
payload data, allow it if the application payload expectation is the
same size than the kernels. If that is the case, the kernel supports
filtering on the payload that the application expects. If the size
differs, the behavior depends on the IO_URING_BPF_FILTER_SZ_STRICT flag:
1) If IO_URING_BPF_FILTER_SZ_STRICT is set and the size expectation
differs, fail the attempt to load the filter.
2) If IO_URING_BPF_FILTER_SZ_STRICT isn't set, allow the filter if
the userspace pdu size is smaller than what the kernel offers.
3) Regardless if IO_URING_BPF_FILTER_SZ_STRICT, fail loading the filter
if the userspace pdu size is bigger than what the kernel supports.
An attempt to load a filter due to sizing will error with -EMSGSIZE.
For that error, the registration struct will have filter->pdu_size
populated with the pdu size that the kernel uses.
Reported-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Tue, 10 Feb 2026 16:29:59 +0000 (09:29 -0700)]
io_uring/bpf_filter: move filter size and populate helper into struct
Rather than open-code this logic in io_uring_populate_bpf_ctx() with
a switch, move it to the issue side definitions. Outside of making this
easier to extend in the future, it's also a prep patch for using the
pdu size for a given opcode filter elsewhere.
Linus Torvalds [Mon, 16 Feb 2026 21:41:38 +0000 (13:41 -0800)]
Merge tag 'slab-for-7.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull more slab updates from Vlastimil Babka:
- Two stable fixes for kmalloc_nolock() usage from NMI context (Harry
Yoo)
- Allow kmalloc_nolock() allocations to be freed with kfree() and thus
also kfree_rcu() and simplify slabobj_ext handling - we no longer
need to track how it was allocated to use the matching freeing
function (Harry Yoo)
* tag 'slab-for-7.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: drop the OBJEXTS_NOSPIN_ALLOC flag from enum objext_flags
mm/slab: allow freeing kmalloc_nolock()'d objects using kfree[_rcu]()
mm/slab: use prandom if !allow_spin
mm/slab: do not access current->mems_allowed_seq if !allow_spin
Jens Axboe [Mon, 16 Feb 2026 21:16:27 +0000 (14:16 -0700)]
io_uring/cancel: de-unionize file and user_data in struct io_cancel_data
By having them share the same space in struct io_cancel_data, it ends up
disallowing IORING_ASYNC_CANCEL_FD|IORING_ASYNC_CANCEL_USERDATA from
working. Eg you cannot match on both a file and user_data for
cancelation purposes. This obviously isn't a common use case as nobody
has reported this, but it does result in -ENOENT potentially being
returned when trying to match on both, rather than actually doing what
the API says it would.
Linus Torvalds [Mon, 16 Feb 2026 21:00:36 +0000 (13:00 -0800)]
Merge tag 'vfs-7.0-rc1.misc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull more misc vfs updates from Christian Brauner:
"Features:
- Optimize close_range() from O(range size) to O(active FDs) by using
find_next_bit() on the open_fds bitmap instead of linearly scanning
the entire requested range. This is a significant improvement for
large-range close operations on sparse file descriptor tables.
- Add FS_XFLAG_VERITY file attribute for fs-verity files, retrievable
via FS_IOC_FSGETXATTR and file_getattr(). The flag is read-only.
Add tracepoints for fs-verity enable and verify operations,
replacing the previously removed debug printk's.
- Prevent nfsd from exporting special kernel filesystems like pidfs
and nsfs. These filesystems have custom ->open() and ->permission()
export methods that are designed for open_by_handle_at(2) only and
are incompatible with nfsd. Update the exportfs documentation
accordingly.
Fixes:
- Fix KMSAN uninit-value in ovl_fill_real() where strcmp() was used
on a non-null-terminated decrypted directory entry name from
fscrypt. This triggered on encrypted lower layers when the
decrypted name buffer contained uninitialized tail data.
The fix also adds VFS-level name_is_dot(), name_is_dotdot(), and
name_is_dot_dotdot() helpers, replacing various open-coded "." and
".." checks across the tree.
- Fix read-only fsflags not being reset together with xflags in
vfs_fileattr_set(). Currently harmless since no read-only xflags
overlap with flags, but this would cause inconsistencies for any
future shared read-only flag
- Return -EREMOTE instead of -ESRCH from PIDFD_GET_INFO when the
target process is in a different pid namespace. This lets userspace
distinguish "process exited" from "process in another namespace",
matching glibc's pidfd_getpid() behavior
Cleanups:
- Use C-string literals in the Rust seq_file bindings, replacing the
kernel::c_str!() macro (available since Rust 1.77)
- Fix typo in d_walk_ret enum comment, add porting notes for the
readlink_copy() calling convention change"
* tag 'vfs-7.0-rc1.misc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: add porting notes about readlink_copy()
pidfs: return -EREMOTE when PIDFD_GET_INFO is called on another ns
nfsd: do not allow exporting of special kernel filesystems
exportfs: clarify the documentation of open()/permission() expotrfs ops
fsverity: add tracepoints
fs: add FS_XFLAG_VERITY for fs-verity files
rust: seq_file: replace `kernel::c_str!` with C-Strings
fs: dcache: fix typo in enum d_walk_ret comment
ovl: use name_is_dot* helpers in readdir code
fs: add helpers name_is_dot{,dot,_dotdot}
ovl: Fix uninit-value in ovl_fill_real
fs: reset read-only fsflags together with xflags
fs/file: optimize close_range() complexity from O(N) to O(Sparse)
Linus Torvalds [Mon, 16 Feb 2026 20:37:13 +0000 (12:37 -0800)]
Merge tag 'kernel-7.0-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
- pid: introduce task_ppid_vnr() helper
- pidfs: convert rb-tree to rhashtable
Mateusz reported performance penalties during task creation because
pidfs uses pidmap_lock to add elements into the rbtree. Switch to an
rhashtable to have separate fine-grained locking and to decouple from
pidmap_lock moving all heavy manipulations outside of it
Also move inode allocation outside of pidmap_lock. With this there's
nothing happening for pidfs under pidmap_lock
- pid: reorder fields in pid_namespace to reduce false sharing
- Revert "pid: make __task_pid_nr_ns(ns => NULL) safe for zombie
callers"
- ipc: Add SPDX license id to mqueue.c
* tag 'kernel-7.0-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pid: introduce task_ppid_vnr() helper
pidfs: implement ino allocation without the pidmap lock
Revert "pid: make __task_pid_nr_ns(ns => NULL) safe for zombie callers"
pid: reorder fields in pid_namespace to reduce false sharing
pidfs: convert rb-tree to rhashtable
ipc: Add SPDX license id to mqueue.c
Linus Torvalds [Mon, 16 Feb 2026 20:21:22 +0000 (12:21 -0800)]
Merge tag 'linux-watchdog-6.20-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- iTCO: Drop vendor support
- s3c2410_wdt: Drop S3C2410 support
- Convert mpc8xxx-wdt to YAML
- Several small fixes and improvements
* tag 'linux-watchdog-6.20-rc1' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: qcom-wdt: Document Glymur watchdog
dt-bindings: watchdog: Convert mpc8xxx-wdt to YAML
dt-bindings: watchdog: samsung-wdt: Split if:then: and constrain more
dt-bindings: watchdog: samsung-wdt: Drop S3C2410
watchdog: s3c2410_wdt: Drop S3C2410 support
dt-bindings: watchdog: samsung-wdt: Define cluster constraints top-level
watchdog: rzv2h_wdt: Discard pm_runtime_put() return value
watchdog: rz: Discard pm_runtime_put() return values
watchdog: Make API functions const correct
watchdog: imx7ulp_wdt: handle the nowayout option
watchdog: sbsa: Update the W_IIDR Implementer bit mask to 0xFFF
watchdog: Always return time left until watchdog times out
watchdog: iTCO: Drop vendor support
watchdog: starfive-wdt: Fix PM reference leak in probe error path
fix it87_wdt early reboot by reporting running timer
Linus Torvalds [Mon, 16 Feb 2026 19:15:19 +0000 (11:15 -0800)]
Merge tag 'leds-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"New Support & Features:
- Add support for the TI LP5812 4x3 matrix RGB LED driver, including
autonomous animation engine control and extensive scan multiplexing
modes
- Add a new driver for the ams Osram AS3668 4-channel I2C LED
controller
- Extend the is31fl32xx driver to support the is31fl3293 variant,
which features 3 channels and 12-bit PWM resolution
Improvements & Fixes:
- Prevent the ExpressWire KTD2801 chip from entering an undefined
state by disabling interrupts during time-sensitive communication
- Ensure the Qualcomm LPG driver detects hardware write failures by
checking the return value of regmap_bulk_write() during LUT
programming
- Fix kernel-doc warnings in the lm3692x driver by documenting
missing struct members and standardizing the comment style
- Update the ExpressWire library to use fsleep() and unexport
internal-only functions
- Improve the is31fl32xx driver by reordering code to eliminate
unnecessary forward declarations
Cleanups & Refactoring:
- Simplify the LP55XX common LED driver by utilizing the
for_each_available_child_of_node_scoped() macro for more concise
node iteration
Device Tree Bindings Updates:
- Add new YAML bindings for the TI LP5860 and LP5812 LED controllers,
and the ams Osram AS3668
- Convert the TI LM3697 white LED driver binding to DT schema format
- Allow multicolor LED nodes to be named with numeric suffixes (e.g.,
multi-led-0) to handle multiple instances without unit addresses
- Document support for the PMH0101 variant in the Qualcomm LPG PWM
and SPMI Flash LED bindings
- Add the issi,is31fl3293 compatible string to the is31fl32xx
binding"
* tag 'leds-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: Convert ti,lm3697 to DT schema
leds: as3668: Driver for the ams Osram 4-channel i2c LED driver
dt-bindings: leds: Add new as3668 support
docs: leds: Document TI LP5812 LED driver
leds: Add basic support for TI/National Semiconductor LP5812 LED Driver
leds: qcom-lpg: Check the return value of regmap_bulk_write()
dt-bindings: leds: qcom,spmi-flash-led: Add PMH0101 compatible
dt-bindings: leds: leds-qcom-lpg: Add support for PMH0101 PWM
dt-bindings: leds: Allow differently named multicolor LEDs
leds: lp55xx: Simplify with scoped for each OF child loop
dt-bindings: leds: add TI/National Semiconductor LP5812 LED Driver
leds: is31f132xx: Add support for is31fl3293
leds: is31f132xx: Re-order code to remove forward declarations
dt-bindings: leds: Add issi,is31fl3293 to leds-is31fl32xx
leds: expresswire: Fix chip state breakage
dt-bindings: leds: Add LP5860 LED controller
leds: lm3692x: Fix kernel-doc for struct lm3692x_led
Linus Torvalds [Mon, 16 Feb 2026 19:05:44 +0000 (11:05 -0800)]
Merge tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Support & Features:
- Add comprehensive support for the ROHM BD72720 PMIC, including core
MFD, regulator, GPIO, clock gate, RTC, and power-supply drivers
- Add support for the Rockchip RK801 PMIC, including core MFD and
regulator drivers
- Add support for the ROHM BD73900 PMIC by leveraging existing common
drivers
- Wire up RTC, hwmon, and input sub-devices for the Apple SMC
(macsmc) driver
- Add support for the Delta Networks TN48M switch CPLD via the
simple-mfd-i2c driver
- Add support for the TS133 variant to the QNAP MCU driver
- Provide support for the sama7d65 XLCD controller in the Atmel HLCDC
driver
- Add backlight sub-device support to the Congatec Board Controller
(cgbc)
- Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver
Improvements & Fixes:
- Implement a "wrapper regmap" for the ROHM BD72720 to handle dual
I2C slave addresses (0x4b and 0x4c) transparently for child devices
- Introduce mutex locking around 'mfd_of_node_list' in the MFD core
to ensure safe concurrent access
- Fix a potential regulator resource leak in the Arizona core driver
during boot sequence failures
- Resolve child device duplication issues on driver rebind for
Qualcomm PM8xxx and OMAP USB host drivers by using
of_platform_depopulate()
- Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a
unique domain suffix
- Implement LOCK register handling for the TI TPS65214 variant to
unlock registers at probe time
- Fully convert the Loongson-2K BMC driver to use managed resources
(pcim) and the standard PCI resource API
- Ensure the Apple SMC mutex is correctly initialized during probe to
prevent NULL pointer dereferences
- Expand the ROHM BD71828 power-supply driver to support 9-bit
register addresses
- Simplify the Samsung S5M RTC driver by querying platform device IRQ
resources directly
- Revert an incorrect read-to-write mask change in the DA9052 SPI
driver to restore default OTP behavior
- Fix kernel-doc warnings in the TI TPS6105x driver
- Cleanups & Refactoring
- Simplify the MFD core by utilizing the scoped
for_each_child_of_node_scoped() macro and streamlining device_node
storage
- Rename ROHM BD71828 IC-specific entities to use consistent prefixes
for better extensibility
- Refactor ROHM BD71828 regmap definitions using the
regmap_reg_range() macro
- Update the ROHM BD71828 driver to use standard C-style comment
headers
- Remove the now unused 'irq_data' field from the Samsung SEC core
structure
- Drop unnecessary use of irqd_get_trigger_type() in the Maxim
MAX77759 driver
- Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected
- Add missing charger-related registers to the ROHM BD71828 core
header and Type-C CC registers to the AXP717
Device Tree Binding Updates:
- Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC,
Bitmain BM1880 System Controller, and NXP LPC32xx System Control
Block
- Clarify trickle-charge terminology and add properties for voltage
drop (VDR) correction and upper charge limits to the generic
battery binding
- Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for
Aspeed SCU
- Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102,
pmh0101, pmk8850, etc)
- Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom
(Microchip), and various MediaTek SCPSYS and regulator components
- Fix a dead link to the audio codec binding in the DA9055
documentation"
* tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
dt-bindings: mfd: da9055: Fix dead link to codec binding
mfd: cgbc: Add support for backlight
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs present on Glymur and Kaanapali
dt-bindings: mfd: Document smp-memram subnode for aspeed,ast2x00-scu
mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
mfd: ls2kbmc: Use PCI API instead of direct accesses
mfd: ls2kbmc: Fully convert to use managed resources
dt-bindings: mfd: mediatek: mt6397: Add missing MT6331 regulator compat
dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt6795-scpsys
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,lan9691-flexcom
mfd: omap-usb-host: Fix OF populate on driver rebind
mfd: qcom-pm8xxx: Fix OF populate on driver rebind
dt-bindings: mfd: syscon: Allow syscon compatible for mediatek,mt7981-topmisc
mfd: qnap-mcu: Add driver data for TS133 variant
dt-bindings: mfd: qnap,ts433-mcu: Add qnap,ts133-mcu compatible
mfd: sec: Fix IRQ domain names duplication
mfd: simple-mfd-i2c: Add Delta TN48M CPLD support
mfd: macsmc: Initialize mutex
dt-bindings: mfd: nxp: Add NXP LPC32xx System Control Block
mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT
...
Yu Kuai [Sat, 14 Feb 2026 05:43:50 +0000 (13:43 +0800)]
blk-mq: use NOIO context to prevent deadlock during debugfs creation
Creating debugfs entries can trigger fs reclaim, which can enter back
into the block layer request_queue. This can cause deadlock if the
queue is frozen.
Previously, a WARN_ON_ONCE check was used in debugfs_create_files()
to detect this condition, but it was racy since the queue can be frozen
from another context at any time.
Introduce blk_debugfs_lock()/blk_debugfs_unlock() helpers that combine
the debugfs_mutex with memalloc_noio_save()/restore() to prevent fs
reclaim from triggering block I/O. Also add blk_debugfs_lock_nomemsave()
and blk_debugfs_unlock_nomemrestore() variants for callers that don't
need NOIO protection (e.g., debugfs removal or read-only operations).
Replace all raw debugfs_mutex lock/unlock pairs with these helpers,
using the _nomemsave/_nomemrestore variants where appropriate.
Linus Torvalds [Mon, 16 Feb 2026 17:30:44 +0000 (09:30 -0800)]
Merge tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (28 commits)
Revert "clk: microchip: core: allow driver to be compiled with COMPILE_TEST"
Revert "clk: microchip: fix typo in reference to a config option"
MIPS: Implement ARCH_HAS_CC_CAN_LINK
MIPS: rb532: Fix MMIO UART resource registration
MIPS: Work around LLVM bug when gp is used as global register variable
MIPS: Loongson64: env: Fixup serial clock-frequency when using LEFI
MIPS: Loongson2ef: Use pcibios_align_resource() to block io range
MIPS: Loongson2ef: Register PCI controller in early stage
clk: microchip: fix typo in reference to a config option
MIPS: Loongson64: dts: fix phy-related definition of LS7A GMAC
clk: microchip: core: allow driver to be compiled with COMPILE_TEST
MIPS: drop unused pic32.h header
watchdog: pic32-wdt: update include to use pic32.h from platform_data
watchdog: pic32-dmt: update include to use pic32.h from platform_data
serial: pic32_uart: update include to use pic32.h from platform_data
rtc: pic32: update include to use pic32.h from platform_data
pinctrl: pic32: update include to use pic32.h from platform_data
mmc: sdhci-pic32: update include to use pic32.h from platform_data
irqchip/irq-pic32-evic: update include to use pic32.h from platform_data
clk: microchip: core: update include to use pic32.h from platform_data
...
Randy Dunlap [Mon, 16 Feb 2026 05:29:51 +0000 (21:29 -0800)]
blk-stat: convert struct blk_stat_callback to kernel-doc
Most of struct blk_stat_callback documentation is already in kernel-doc
format. Convert the remaining struct members to kernel-doc to avoid
kernel-doc warnings:
Warning: block/blk-stat.h:62 struct member 'list' not described
in 'blk_stat_callback'
Warning: block/blk-stat.h:62 struct member 'timer_fn' not described
in 'blk_stat_callback'
Warning: block/blk-stat.h:62 struct member 'rcu' not described
in 'blk_stat_callback'
Warning: block/blk-stat.h:133 No description found for return value of
'blk_stat_is_active'
Randy Dunlap [Mon, 16 Feb 2026 05:29:41 +0000 (21:29 -0800)]
block: fix enum descriptions kernel-doc
Fix all kernel-doc warnings in blk_types.h:
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_READ' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_WRITE' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_FLUSH' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_DISCARD' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_SECURE_ERASE' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_ZONE_APPEND' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_WRITE_ZEROES' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_ZONE_OPEN' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_ZONE_CLOSE' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_ZONE_FINISH' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_ZONE_RESET' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_ZONE_RESET_ALL' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_DRV_IN' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_DRV_OUT' not described in enum 'req_op'
Warning: include/linux/blk_types.h:371 Enum value 'REQ_OP_LAST' not described in enum 'req_op'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Mon, 16 Feb 2026 13:55:30 +0000 (13:55 +0000)]
io_uring/rsrc: improve regbuf iov validation
Deduplicate io_buffer_validate() calls by moving the checks into
io_sqe_buffer_register(). Now we also don't need special handling in
io_buffer_validate() passing through buffer removal requests. I also
was using it as a cleanup before some other changes.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dylan Yudaken [Sun, 15 Feb 2026 23:15:23 +0000 (23:15 +0000)]
io_uring: remove unneeded io_send_zc accounting
zc->len and zc->buf are not actually used once you get to the retry
stage. The buffer remains in kmsg->msg.msg_iter, which is setup in
io_send_setup.
Note: it still seems needed in io_send due to io_send_select_buffer
needing it (for the len parameter).
io_uring/cmd_net: fix too strict requirement on ioctl
Attempting SOCKET_URING_OP_SETSOCKOPT on an AF_NETLINK socket resulted
in an -EOPNOTSUPP, as AF_NETLINK doesn't have an ioctl in its struct
proto, but only in struct proto_ops.
Prior to the blamed commit, io_uring_cmd_sock() only had two cmd_op
operations, both requiring ioctl, thus the check was warranted.
Since then, 4 new cmd_op operations have been added, none of which
depend on ioctl. This patch moves the ioctl check, so it only applies
to the original operations.
AFAICT, the ioctl requirement was unintentional, and it wasn't
visible in the blamed patch within 3 lines of context.
Linus Torvalds [Mon, 16 Feb 2026 15:04:01 +0000 (07:04 -0800)]
Merge tag 'probes-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull kprobes updates from Masami Hiramatsu:
- Use a dedicated kernel thread to optimize the kprobes instead of
using workqueue thread. Since the kprobe optimizer waits a long time
for synchronize_rcu_task(), it can block other workers in the same
queue if it uses a workqueue.
- kprobe-events: return immediately if no new probe events are
specified on the kernel command line at boot time. This shortens
the kernel boot time.
- When a kprobe is fully removed from the kernel code, retry optimizing
another kprobe which is blocked by that kprobe.
* tag 'probes-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: Use dedicated kthread for kprobe optimizer
tracing: kprobe-event: Return directly when trace kprobes is empty
kprobes: retry blocked optprobe in do_free_cleaned_kprobes
Linus Torvalds [Mon, 16 Feb 2026 03:45:00 +0000 (19:45 -0800)]
Merge tag 'm68knommu-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- defconfig cleanup
- fix for legacy 68000 CPU memmove() of non-aligned pointers
- replace strcpy() with strscpy() for ucsimm target
* tag 'm68knommu-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: Replace deprecated strcpy with strscpy in init_ucsimm
m68k: nommu: fix memmove() with differently aligned src and dest for 68000
m68k: defconfig: Clean up references to non-existing configs
Pavel Begunkov [Sun, 15 Feb 2026 22:06:52 +0000 (22:06 +0000)]
io_uring: delay sqarray static branch disablement
io_key_has_sqarray static branch can be easily switched on/off by the
user every time patching the kernel. That can be very disruptive as it
might require heavy synchronisation across all CPUs. Use deferred static
keys, which can rate-limit it by deferring, batching and potentially
effectively eliminating dec+inc pairs.
Fixes: 9b296c625ac1d ("io_uring: static_key for !IORING_SETUP_NO_SQARRAY") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Sun, 15 Feb 2026 21:34:28 +0000 (21:34 +0000)]
io_uring/query: return support for custom rx page size
Add an ability to query if the zcrx rx page size setting is available.
Note, even when the API is supported by io_uring, the registration can
still get rejected for various reasons, e.g. when the NIC or the driver
doesn't support it, when the particular specified size is unsupported,
when the memory area doesn't satisfy all requirements, etc.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Sun, 15 Feb 2026 18:47:59 +0000 (10:47 -0800)]
Merge tag 'docs-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of small, late-arriving documentation fixes"
* tag 'docs-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: toshiba_haps: fix grammar error in SSD warning
Docs/mm: fix typos and grammar in page_tables.rst
Docs/core-api: fix typos in rbtree.rst
docs: clarify wording in programming-language.rst
docs: process: maintainer-pgp-guide: update kernel.org docs link
docs: kdoc_parser: allow __exit in function prototypes
Linus Torvalds [Sun, 15 Feb 2026 18:24:46 +0000 (10:24 -0800)]
Merge tag '9p-for-7.0-rc1' of https://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
- 9p/xen racy double-free fix
- track 9p RPC waiting time as IO
* tag '9p-for-7.0-rc1' of https://github.com/martinetd/linux:
9p/xen: protect xen_9pfs_front_free against concurrent calls
9p: Track 9P RPC waiting time as IO
wait: Introduce io_wait_event_killable()
Linus Torvalds [Sun, 15 Feb 2026 18:20:37 +0000 (10:20 -0800)]
Merge tag 'tsm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull TSM updates from Dan Williams:
"A couple of updates to the maximum buffer sizes supported for the
configfs-tsm-reports interface.
This interface is a common transport that conveys the varied
architecture specific launch attestation reports for confidential VMs.
- Prepare the configfs-tsm-reports interface for passing larger
attestation evidence blobs for "Device Identifier Composition
Engine" (DICE) and Post Quantum Crypto (PQC)
- Update the tdx-guest driver for DICE evidence (larger certificate
chains and the CBOR Web Token schema)"
* tag 'tsm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
configfs-tsm-report: tdx_guest: Increase Quote buffer size to 128KB
configfs-tsm-report: Increase TSM_REPORT_OUTBLOB_MAX to 16MB
configfs-tsm-report: Document size limits for outblob attributes
Linus Torvalds [Sun, 15 Feb 2026 16:29:26 +0000 (08:29 -0800)]
Merge tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware:
- use a dedicated algorithm for AMD Navi
- replace magic numbers with named constants
- replace min_t() with min() to avoid u8 truncation
- refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
- at24 i2c eeprom:
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
* tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
i2c: imx-lpi2c: fix SMBus block read NACK after byte count
i2c: designware: Remove an unnecessary condition
i2c: designware: Enable mode swapping
i2c: designware: Combine the init functions
i2c: designware: Combine some of the common functions
i2c: designware: Use device_is_compatible() instead of custom approach
dt-bindings: eeprom: at24: Add compatible for Puya P24C128F
drivers/i2c/busses: use min() instead of min_t()
i2c: imx-lpi2c: Add runtime PM support for IRQ and clock management on i.MX8QXP/8QM
i2c: amd-mp2: clean up amd_mp2_find_device()
i2c: designware: Replace magic numbers with named constants
i2c: rtl9300: use of instead of fwnode
i2c: rtl9300: remove const cast
i2c: tegra: remove unused rst
i2c: designware: Remove not-going-to-be-supported code for Baikal SoC
i2c: spacemit: drop useless spaces
i2c: mlxbf: Use HZ_PER_KHZ in the driver
i2c: mlxbf: Remove unused bus speed definitions
i2c: core: Use dev_fwnode()
i2c: core: Replace custom implementation of device_match_fwnode()
...
Linus Torvalds [Sun, 15 Feb 2026 16:24:19 +0000 (08:24 -0800)]
Merge tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for FocalTech FT8112 added to i2c-hid driver
- support for FocalTech FT3518 added to edt-ft5x06 driver
- support for power buttons in TWL603x chips added to twl4030-pwrbutton
driver
- an update to gpio-decoder driver to make it usable on non-OF
platforms and to clean up the code
- an update to synaptics_i2c driver switching it to use managed
resources and a fix to restarting polling after resume
- an update to gpio-keys driver to fall back to getting IRQ from
resources if not specified using other means
- an update to ili210x driver to support polling mode
- a number of input drivers switched to scnprintf() to suppress
truncation warnings
- a number of updates and conversions of device tree bindings to yaml
format
- fixes to spelling in comments and messages in several drivers
- other assorted fixups
* tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU
dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038
Input: apbps2 - fix comment style and typos
Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys
Input: novatek-nvt-ts - drop wake_type check
dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells'
Input: ili210x - add support for polling mode
dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek
Input: appletouch - fix potential race between resume and open
HID: i2c-hid: Add FocalTech FT8112
dt-bindings: input: i2c-hid: Introduce FocalTech FT8112
Input: synaptics_i2c - switch to using managed resources
Input: synaptics_i2c - guard polling restart in resume
Input: gpio_decoder - don't use "proxy" headers
Input: gpio_decoder - make use of the macros from bits.h
Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep()
Input: gpio_decoder - unify messages with help of dev_err_probe()
Input: gpio_decoder - make use of device properties
Input: serio - complete sizeof(*pointer) conversions
Input: wdt87xx_i2c - switch to use dev_err_probe()
...
Linus Torvalds [Sun, 15 Feb 2026 16:18:57 +0000 (08:18 -0800)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
Pavel Begunkov [Sat, 14 Feb 2026 22:20:47 +0000 (22:20 +0000)]
io_uring/zcrx: fix post open error handling
Closing a queue doesn't guarantee that all associated page pools are
terminated right away, let the refcounting do the work instead of
releasing the zcrx ctx directly.
Cc: stable@vger.kernel.org Fixes: e0793de24a9f6 ("io_uring/zcrx: set pp memory provider for an rx queue") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Sat, 14 Feb 2026 22:19:32 +0000 (22:19 +0000)]
io_uring/zcrx: fix sgtable leak on mapping failures
In an unlikely case when io_populate_area_dma() fails, which could only
happen on a PAGE_POOL_32BIT_ARCH_WITH_64BIT_DMA machine,
io_zcrx_map_area() will have an initialised and not freed table. It was
supposed to be cleaned up in the error path, but !is_mapped prevents
that.
Fixes: 439a98b972fbb ("io_uring/zcrx: deduplicate area mapping") Cc: stable@vger.kernel.org Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Helge Deller [Sat, 14 Feb 2026 21:16:34 +0000 (22:16 +0100)]
Partly revert "drm/hyperv: Remove reference to hyperv_fb driver"
This partly reverts commit 8f582bcd132c ("drm/hyperv: Remove reference
to hyperv_fb driver") which was messed up by me while trying to fix a
merge conflict.
Linus Torvalds [Sat, 14 Feb 2026 20:47:15 +0000 (12:47 -0800)]
Merge tag 'loongarch-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Select HAVE_CMPXCHG_{LOCAL,DOUBLE}
- Add 128-bit atomic cmpxchg support
- Add HOTPLUG_SMT implementation
- Wire up memfd_secret system call
- Fix boot errors and unwind errors for KASAN
- Use BPF prog pack allocator and add BPF arena support
- Update dts files to add nand controllers
- Some bug fixes and other small changes
* tag 'loongarch-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: dts: loongson-2k1000: Add nand controller support
LoongArch: dts: loongson-2k0500: Add nand controller support
LoongArch: BPF: Implement bpf_addr_space_cast instruction
LoongArch: BPF: Implement PROBE_MEM32 pseudo instructions
LoongArch: BPF: Use BPF prog pack allocator
LoongArch: Use IS_ERR_PCPU() macro for KGDB
LoongArch: Rework KASAN initialization for PTW-enabled systems
LoongArch: Disable instrumentation for setup_ptwalker()
LoongArch: Remove some extern variables in source files
LoongArch: Guard percpu handler under !CONFIG_PREEMPT_RT
LoongArch: Handle percpu handler address for ORC unwinder
LoongArch: Use %px to print unmodified unwinding address
LoongArch: Prefer top-down allocation after arch_mem_init()
LoongArch: Add HOTPLUG_SMT implementation
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
LoongArch: Wire up memfd_secret system call
LoongArch: Replace seq_printf() with seq_puts() for simple strings
LoongArch: Add 128-bit atomic cmpxchg support
LoongArch: Add detection for SC.Q support
LoongArch: Select HAVE_CMPXCHG_LOCAL in Kconfig
Linus Torvalds [Sat, 14 Feb 2026 20:39:34 +0000 (12:39 -0800)]
Merge tag 'memblock-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- update tools/include/linux/mm.h to fix memblock tests compilation
- drop redundant struct page* parameter from memblock_free_pages() and
get struct page from the pfn
- add underflow detection for size calculation in memtest and warn
about underflow when VM_DEBUG is enabled
* tag 'memblock-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm/memtest: add underflow detection for size calculation
memblock: drop redundant 'struct page *' argument from memblock_free_pages()
memblock test: include <linux/sizes.h> from tools mm.h stub
Linus Torvalds [Sat, 14 Feb 2026 19:54:12 +0000 (11:54 -0800)]
Merge tag 'fbdev-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"It's now easily possible to replace the framebuffer penguin boot logo
with an own logo at compile time (Vincent Mailhol)
The hyperv framebuffer driver has been removed, since the hyperv DRM
driver now seems to provide equal functionality.
Various console_conditional_schedule() calls across the console
drivers (fbcon, printk, vt) have been removed since they are no longer
necessary.
All other patches are either fixes in au1100fb, au1200fb, ffb, rivafb,
vt8500lcdfb and of_display_timing, or minor cleanups in the fbcon and
omapfb drivers"
* tag 'fbdev-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (32 commits)
fbcon: Declare struct fb_info.fbcon_par as of type struct fbcon_par
fbcon: Remove struct fbcon_display.inverse
fbdev: au1200fb: Fix a memory leak in au1200fb_drv_probe()
fbdev: ffb: fix corrupted video output on Sun FFB1
fbdev: of_display_timing: Fix device node reference leak in of_get_display_timings()
staging: fbtft: Make framebuffer registration message debug-only
staging: fbtft: Fix build failure when CONFIG_FB_DEVICE=n
fbdev: au1100fb: Check return value of clk_enable() in .resume()
printk, vt, fbcon: Remove console_conditional_schedule()
fbdev: fix fb_pad_unaligned_buffer mask
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
fbdev: vt8500lcdfb: fix missing dma_free_coherent()
video/logo: don't select LOGO_LINUX_MONO and LOGO_LINUX_VGA16 by default
video/logo: move logo selection logic to Kconfig
video/logo: remove logo_mac_clut224
sh: defconfig: remove CONFIG_LOGO_SUPERH_*
newport_con: depend on LOGO_LINUX_CLUT224 instead of LOGO_SGI_CLUT224
video/logo: allow custom logo
video/logo: add a type parameter to the logo makefile function
video/logo: remove orphan .pgm Makefile rule
...
Linus Torvalds [Sat, 14 Feb 2026 19:30:05 +0000 (11:30 -0800)]
Merge tag 'caps-pr-20260213' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities updates from Serge Hallyn:
- add KUnit tests for some core capabilities helpers
- avoid emitting IPC audit messages when there's not
actually a permission being denied
* tag 'caps-pr-20260213' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
ipc: don't audit capability check in ipc_permissions()
security: Add KUnit tests for kuid_root_in_ns and vfsuid_root_in_currentns
Linus Torvalds [Sat, 14 Feb 2026 19:20:26 +0000 (11:20 -0800)]
Merge tag 'rpmsg-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
- Fix a race in rpmsg driver_override_show() and use the existing
helper to implement the store()
- Implement support for EPOLLOUT in the virtio rpmsg driver
* tag 'rpmsg-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: core: fix race in driver_override_show() and use core helper
rpmsg: virtio: EPOLLOUT support
Linus Torvalds [Sat, 14 Feb 2026 19:17:54 +0000 (11:17 -0800)]
Merge tag 'rproc-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Fix a memory remapping issue and make a few life-cycle improvements
in the i.MX HiFi remoteproc driver
- Add support the System Manager CPU and LMM APIs and use this to
support i.MX95
- Rework the handling of the Mediatek SCP clock to avoid a potential
circular deadlock in the clock providers
- Refactor the Qualcomm secure-world helpers and add support in the
Qualcomm PAS remoteproc driver for reading a resource-table from
secure world. Use this to configure the IOMMU on newer targets where
Linux runs in EL2
* tag 'rproc-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: imx_rproc: Fix invalid loaded resource table detection
remoteproc: mediatek: Break lock dependency to `prepare_lock`
remoteproc: imx_rproc: Add support for i.MX95
remoteproc: imx_rproc: Add support for System Manager CPU API
remoteproc: imx_rproc: Add support for System Manager LMM API
remoteproc: imx_rproc: Introduce prepare ops for imx_rproc_dcfg
remoteproc: imx_rproc: Add runtime ops copy to support dynamic behavior
dt-bindings: remoteproc: fsl,imx-rproc: Add support for i.MX95
dt-bindings: remoteproc: Add HSM M4F core on TI K3 SoCs
remoteproc: xlnx_r5: Simplify with scoped for each OF child loop
remoteproc: mtk_scp: Simplify with scoped for each OF child loop
remoteproc: imx_dsp_rproc: Only reset carveout memory at RPROC_OFFLINE state
dt-bindings: remoteproc: qcom,sm8550-pas: Drop SM8750 ADSP from if-branch
dt-bindings: remoteproc: qcom,adsp: Allow cx-supply on qcom,sdm845-slpi-pas
remoteproc: imx_dsp_rproc: Fix multiple start/stop operations
remoteproc: imx_rproc: Use strstarts for "rsc-table" check
remoteproc: imx_dsp_rproc: Wait for suspend ACK only if WAIT_FW_CONFIRMATION is set
remoteproc: imx_dsp_rproc: Rename macro to reflect multiple contexts
remoteproc: imx_dsp_rproc: Skip RP_MBOX_SUSPEND_SYSTEM when mailbox TX channel is uninitialized
dt-bindings: remoteproc: Fix dead link to Keystone DSP GPIO binding
Linus Torvalds [Sat, 14 Feb 2026 19:13:32 +0000 (11:13 -0800)]
Merge tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
"Platform and core updates
PCC:
- Updates to transmission and interrupt handling, including dynamic
txdone configuration, ->last_tx_done() wiring, and SHMEM
initialization fixes. Reverted previous shared buffer patch
MediaTek
- Introduce mtk-vcp-mailbox driver and bindings for MT8196 VCP
- Expand mtk-cmdq for MT8196 with GCE virtualization, mminfra_offset,
and instruction generation data
Spreadtrum (SPRD)
- Add Mailbox Revision 2 support and UMS9230 bindings
- Fix unhandled interrupt masking and TX done delivery flags
Microchip
- Add pic64gx compatibility to MPFS
- Fix out-of-bounds access and smatch warnings in mchp-ipc-sbi
Core & Misc Platform Updates
- Prevent out-of-bounds access in fw_mbox_index_xlate()
- Add bindings for Qualcomm CPUCP (Kaanapali)
- Simplify mtk-cmdq and zynqmp-ipi with scoped OF child iterators
- Consolidate various minor fixes, dead code removal, and typo
corrections across Broadcom, NXP, Samsung, Xilinx, ARM, and core
headers"
* tag 'mailbox-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox: (34 commits)
mailbox: sprd: mask interrupts that are not handled
mailbox: sprd: add support for mailbox revision 2
mailbox: sprd: clear delivery flag before handling TX done
dt-bindings: mailbox: sprd: add compatible for UMS9230
mailbox: bcm-ferxrm-mailbox: Use default primary handler
mailbox: Remove mailbox_client.h from controller drivers
mailbox: zynqmp-ipi: Simplify with scoped for each OF child loop
mailbox: mtk-cmdq: Simplify with scoped for each OF child loop
dt-bindings: mailbox: xlnx,zynqmp-ipi-mailbox: Document msg region requirement
mailbox: Improve RISCV_SBI_MPXY_MBOX guidance
mailbox: mchp-ipc-sbi: fix uninitialized symbol and other smatch warnings
mailbox: arm_mhuv3: fix typo in comment
mailbox: cix: fix typo in error message
mailbox: imx: Skip the suspend flag for i.MX7ULP
mailbox: exynos: drop unneeded runtime pointer (pclk)
mailbox: pcc: Remove spurious IRQF_ONESHOT usage
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
mailbox: mtk-cmdq: Add GCE hardware virtualization configuration
mailbox: mtk-cmdq: Add cmdq private data to cmdq_pkt for generating instruction
...
Linus Torvalds [Sat, 14 Feb 2026 18:50:31 +0000 (10:50 -0800)]
Merge tag 'exfat-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Improve error code handling and four cleanups
- Reduce unnecessary valid_size extension during mmap write to avoid
over-extending writes
- Optimize consecutive FAT entry reads by caching buffer heads in
__exfat_ent_get to significantly reduce sb_bread() calls
- Add multi-cluster (contiguous cluster) support to exfat_get_cluster()
and exfat_map_cluster() for better sequential read performance,
especially on small cluster sizes
* tag 'exfat-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: add blank line after declarations
exfat: remove unnecessary else after return statement
exfat: support multi-cluster for exfat_get_cluster
exfat: return the start of next cache in exfat_cache_lookup
exfat: tweak cluster cache to support zero offset
exfat: support multi-cluster for exfat_map_cluster
exfat: remove handling of non-file types in exfat_map_cluster
exfat: reuse cache to improve exfat_get_cluster
exfat: reduce the number of parameters for exfat_get_cluster()
exfat: remove the unreachable warning for cache miss cases
exfat: remove the check for infinite cluster chain loop
exfat: improve exfat_find_last_cluster
exfat: improve exfat_count_num_clusters
exfat: support reuse buffer head for exfat_ent_get
exfat: add cache option for __exfat_ent_get
exfat: reduce unnecessary writes during mmap write
exfat: improve error code handling in exfat_find_empty_entry()
Stephen Boyd [Sat, 14 Feb 2026 18:23:59 +0000 (10:23 -0800)]
Merge branches 'clk-aspeed' and 'clk-qcom' into clk-next
* clk-aspeed:
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
* clk-qcom: (49 commits)
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: qcom: gfx3d: add parent to parent request map
clk: qcom: dispcc-sm7150: Fix dispcc_mdss_pclk1_clk_src
clk: qcom: dispcc-sdm845: Enable parents for pixel clocks
clk: qcom: regmap-divider: convert from divider_round_rate() to divider_determine_rate()
clk: qcom: regmap-divider: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: qcom: alpha-pll: convert from divider_round_rate() to divider_determine_rate()
clk: qcom: Add support for GPUCC and GXCLK for Kaanapali
clk: qcom: Add support for VideoCC driver for Kaanapali
clk: qcom: camcc: Add support for camera clock controller for Kaanapali
clk: qcom: dispcc: Add support for display clock controller Kaanapali
clk: qcom: clk-alpha-pll: Add support for controlling Pongo EKO_T PLL
clk: qcom: clk-alpha-pll: Update the PLL support for cal_l
clk: qcom: camcc: Add camera clock controller driver for SM8750 SoC
clk: qcom: clk-alpha-pll: Add support for controlling Rivian PLL
dt-bindings: clock: qcom: document the Kaanapali GPU Clock Controller
dt-bindings: clock: qcom: Add Kaanapali video clock controller
dt-bindings: clock: qcom: Add support for CAMCC for Kaanapali
dt-bindings: clock: qcom: document Kaanapali DISPCC clock controller
dt-bindings: clock: qcom: Add camera clock controller for SM8750 SoC
...
Stephen Boyd [Sat, 14 Feb 2026 18:23:51 +0000 (10:23 -0800)]
Merge branches 'clk-imx', 'clk-divider', 'clk-rockchip' and 'clk-microchip' into clk-next
* clk-imx:
clk: imx: fracn-gppll: Add 241.90 MHz Support
clk: imx: fracn-gppll: Add 332.60 MHz Support
* clk-divider:
rtc: ac100: convert from divider_round_rate() to divider_determine_rate()
clk: zynqmp: divider: convert from divider_round_rate() to divider_determine_rate()
clk: x86: cgu: convert from divider_round_rate() to divider_determine_rate()
clk: versaclock3: convert from divider_round_rate() to divider_determine_rate()
clk: stm32: stm32-core: convert from divider_round_rate_parent() to divider_determine_rate()
clk: stm32: stm32-core: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: sprd: div: convert from divider_round_rate() to divider_determine_rate()
clk: sophgo: sg2042-clkgen: convert from divider_round_rate() to divider_determine_rate()
clk: nxp: lpc32xx: convert from divider_round_rate() to divider_determine_rate()
clk: nuvoton: ma35d1-divider: convert from divider_round_rate() to divider_determine_rate()
clk: milbeaut: convert from divider_round_rate() to divider_determine_rate()
clk: milbeaut: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: loongson1: convert from divider_round_rate() to divider_determine_rate()
clk: hisilicon: clkdivider-hi6220: convert from divider_round_rate() to divider_determine_rate()
clk: bm1880: convert from divider_round_rate() to divider_determine_rate()
clk: bm1880: convert from divider_ro_round_rate() to divider_ro_determine_rate()
clk: actions: owl-divider: convert from divider_round_rate() to divider_determine_rate()
clk: actions: owl-composite: convert from owl_divider_helper_round_rate() to divider_determine_rate()
clk: sunxi-ng: convert from divider_round_rate_parent() to divider_determine_rate()
clk: sophgo: cv18xx-ip: convert from divider_round_rate() to divider_determine_rate()
* clk-rockchip:
clk: rockchip: Fix error pointer check after rockchip_clk_register_gate_link()
* clk-microchip:
dt-bindings: clock: mpfs-clkcfg: Add pic64gx compatibility
dt-bindings: clock: mpfs-ccc: Add pic64gx compatibility
clk: microchip: drop POLARFIRE from ARCH_MICROCHIP_POLARFIRE
clk: microchip: core: remove unused include asm/traps.h
clk: microchip: core: correct return value on *_get_parent()
clk: microchip: core: remove duplicate determine_rate on pic32_sclk_ops
Stephen Boyd [Sat, 14 Feb 2026 18:23:37 +0000 (10:23 -0800)]
Merge branches 'clk-amlogic', 'clk-thead', 'clk-mediatek' and 'clk-samsung' into clk-next
* clk-amlogic:
clk: meson: gxbb: use the existing HHI_HDMI_PLL_CNTL3 macro
clk: meson: g12a: Limit the HDMI PLL OD to /4
clk: meson: gxbb: Limit the HDMI PLL OD to /4 on GXL/GXM SoCs
clk: amlogic: remove potentially unsafe flags from S4 video clocks
clk: amlogic: add video-related clocks for S4 SoC
dt-bindings: clock: add video clock indices for Amlogic S4 SoC
clk: meson: t7: add t7 clock peripherals controller driver
clk: meson: t7: add support for the T7 SoC PLL clock
dt-bindings: clock: add Amlogic T7 peripherals clock controller
dt-bindings: clock: add Amlogic T7 SCMI clock controller
dt-bindings: clock: add Amlogic T7 PLL clock controller
* clk-thead:
clk: thead: th1520-ap: Support CPU frequency scaling
clk: thead: th1520-ap: Add macro to define multiplexers with flags
clk: thead: th1520-ap: Support setting PLL rates
clk: thead: th1520-ap: Add C910 bus clock
clk: thead: th1520-ap: Poll for PLL lock and wait for stability
dt-bindings: clock: thead,th1520-clk-ap: Add ID for C910 bus clock
* clk-mediatek:
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
dt-bindings: clock: mediatek,mt7622-pciesys: Remove syscon compatible
clk: mediatek: Drop __initconst from gates
* clk-samsung:
clk: samsung: gs101: add support for Display Process Unit (DPU) clocks
dt-bindings: samsung: exynos-sysreg: add gs101 dpu compatible
dt-bindings: clock: google,gs101-clock: Add DPU clock management unit
dt-bindings: clock: google,gs101-clock: fix alphanumeric ordering
clk: samsung: fix sysreg save/restore when PM is enabled for CMU
clk: samsung: avoid warning message on legacy Exynos (auto clock gating)
clk: samsung: gs101: Enable auto_clock_gate mode for each gs101 CMU
clk: samsung: Implement automatic clock gating mode for CMUs
dt-bindings: clock: google,gs101-clock: add samsung,sysreg property as required
clk: samsung: exynosautov920: add clock support
dt-bindings: clock: exynosautov920: add MFD clock definitions
Stephen Boyd [Sat, 14 Feb 2026 18:23:04 +0000 (10:23 -0800)]
Merge branches 'clk-renesas', 'clk-cleanup', 'clk-spacemit' and 'clk-tegra' into clk-next
* clk-renesas: (25 commits)
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: renesas: Add missing log message terminators
clk: renesas: rzg2l: Remove DSI clock rate restrictions
clk: renesas: rzv2h: Deassert reset on assert timeout
clk: renesas: rzg2l: Deassert reset on assert timeout
clk: renesas: cpg-mssr: Unlock before reset verification
clk: renesas: r9a09g056: Add entries for CANFD
clk: renesas: r9a09g057: Add entries for CANFD
clk: renesas: r9a09g077: Add CANFD clocks
clk: renesas: cpg-mssr: Handle RZ/T2H register layout in PM callbacks
dt-bindings: clock: renesas,r9a09g077/87: Add PCLKCAN ID
clk: renesas: cpg-mssr: Simplify pointer math in cpg_rzt2h_mstp_read()
clk: renesas: r9a09g056: Add clock and reset entries for TSU
clk: renesas: r9a09g057: Add entries for RSCIs
clk: renesas: r9a09g056: Add entries for RSCIs
clk: renesas: r9a09g056: Add entries for the RSPIs
clk: renesas: r9a09g056: Add entries for ICU
clk: renesas: r9a09g056: Add entries for the DMACs
...
* clk-cleanup:
clk: Disable KUNIT_UML_PCI
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: tegra: tegra124-emc: fix device leak on set_rate()
clk: Annotate #else and #endif
clk: Merge prepare and unprepare sections
clk: Move clk_{save,restore}_context() to COMMON_CLK section
clk: clk-apple-nco: Add "apple,t8103-nco" compatible
clk: versatile: impd1: Simplify with scoped for each OF child loop
clk: scpi: Simplify with scoped for each OF child loop
clk: lmk04832: Simplify with scoped for each OF child loop
* clk-spacemit:
clk: spacemit: k3: add the clock tree
clk: spacemit: k3: extract common header
clk: spacemit: ccu_pll: add plla type clock
clk: spacemit: ccu_mix: add inverted enable gate clock
dt-bindings: soc: spacemit: k3: add clock support
clk: spacemit: add platform SoC prefix to reset name
clk: spacemit: extract common ccu functions
reset: spacemit: fix auxiliary device id
clk: spacemit: prepare common ccu header
clk: spacemit: Hide common clock driver from user controller
clk: spacemit: Respect Kconfig setting when building modules
* clk-tegra:
clk: tegra30: Add CSI pad clock gates
clk: tegra: Set CSUS as vi_sensor's gate for Tegra20, Tegra30 and Tegra114
clk: tegra20: Reparent dsi clock to pll_d_out0
clk: tegra: tegra124-emc: Simplify with scoped for each OF child loop
clk: tegra: Adjust callbacks in tegra_clock_pm
clk: tegra: tegra124-emc: Fix potential memory leak in tegra124_clk_register_emc()
Linus Torvalds [Sat, 14 Feb 2026 17:48:10 +0000 (09:48 -0800)]
Merge tag 'f2fs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this development cycle, we focused on several key performance
optimizations:
- introducing large folio support to enhance read speeds for
immutable files
- reducing checkpoint=enable latency by flushing only committed dirty
pages
- implementing tracepoints to diagnose and resolve lock priority
inversion.
Additionally, we introduced the packed_ssa feature to optimize the SSA
footprint when utilizing large block sizes.
Detail summary:
Enhancements:
- support large folio for immutable non-compressed case
- support non-4KB block size without packed_ssa feature
- optimize f2fs_enable_checkpoint() to avoid long delay
- optimize f2fs_overwrite_io() for f2fs_iomap_begin
- optimize NAT block loading during checkpoint write
- add write latency stats for NAT and SIT blocks in
f2fs_write_checkpoint
- pin files do not require sbi->writepages lock for ordering
- avoid f2fs_map_blocks() for consecutive holes in readpages
- flush plug periodically during GC to maximize readahead effect
- add tracepoints to catch lock overheads
- add several sysfs entries to tune internal lock priorities
Fixes:
- fix lock priority inversion issue
- fix incomplete block usage in compact SSA summaries
- fix to show simulate_lock_timeout correctly
- fix to avoid mapping wrong physical block for swapfile
- fix IS_CHECKPOINTED flag inconsistency issue caused by
concurrent atomic commit and checkpoint writes
- fix to avoid UAF in f2fs_write_end_io()"
* tag 'f2fs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (61 commits)
f2fs: sysfs: introduce critical_task_priority
f2fs: introduce trace_f2fs_priority_update
f2fs: fix lock priority inversion issue
f2fs: optimize f2fs_overwrite_io() for f2fs_iomap_begin
f2fs: fix incomplete block usage in compact SSA summaries
f2fs: decrease maximum flush retry count in f2fs_enable_checkpoint()
f2fs: optimize NAT block loading during checkpoint write
f2fs: change size parameter of __has_cursum_space() to unsigned int
f2fs: add write latency stats for NAT and SIT blocks in f2fs_write_checkpoint
f2fs: pin files do not require sbi->writepages lock for ordering
f2fs: fix to show simulate_lock_timeout correctly
f2fs: introduce FAULT_SKIP_WRITE
f2fs: check skipped write in f2fs_enable_checkpoint()
Revert "f2fs: add timeout in f2fs_enable_checkpoint()"
f2fs: fix to unlock folio in f2fs_read_data_large_folio()
f2fs: fix error path handling in f2fs_read_data_large_folio()
f2fs: use folio_end_read
f2fs: fix to avoid mapping wrong physical block for swapfile
f2fs: avoid f2fs_map_blocks() for consecutive holes in readpages
f2fs: advance index and offset after zeroing in large folio read
...
Min-Hsun Chang [Mon, 9 Feb 2026 14:56:03 +0000 (22:56 +0800)]
Docs/mm: fix typos and grammar in page_tables.rst
Correct several spelling and grammatical errors in the page tables
documentation. This includes:
- Fixing "a address" to "an address"
- Fixing "pfs" to "pfns"
- Correcting the possessive "Torvald's" to "Torvalds's"
- Fixing "instruction that want" to "instruction that wants"
- Fixing "code path" to "code paths"
Signed-off-by: Min-Hsun Chang <chmh0624@gmail.com> Reviewed-by: Linus Walleij <linusw@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260209145603.96664-1-chmh0624@gmail.com>
Min-Hsun Chang [Tue, 10 Feb 2026 06:08:29 +0000 (14:08 +0800)]
Docs/core-api: fix typos in rbtree.rst
Correct minor typographical errors in the red-black tree documentation:
- Remove redundant "a" in the cached rbtrees section.
- Fix "updated" to "update" in the augmented rbtrees section.
- Fix "be looking" to "by looking" in the interval tree sample usage.
Signed-off-by: Min-Hsun Chang <chmh0624@gmail.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260210060829.42975-1-chmh0624@gmail.com>
Andreas Hindborg [Sat, 14 Feb 2026 09:12:54 +0000 (10:12 +0100)]
block: update docs for bio and bvec_iter
The documentation for bio and bvec_iter refers to a vector named bvl_vec.
This does not exist. Update the documentation comment with correct use.
Also update documentation comments for remaining fields of `bvec_iter` to
improve readability.
The fields of `bvec_iter` is using a mix of tabs and spaces for
indentation. While at it, change them all to tabs, which is most prevalent
in this struct definition.
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
René Rebe [Thu, 5 Feb 2026 15:49:58 +0000 (16:49 +0100)]
fbdev: ffb: fix corrupted video output on Sun FFB1
Fix Sun FFB1 corrupted video out ([1] and [2]) by disabling overlay and
initializing window mode to a known state. The issue never appeared on
my FFB2+/vertical nor Elite3D/M6. It could also depend on the PROM
version.
/SUNW,ffb@1e,0: FFB at 000001fc00000000, type 11, DAC pnum[236c] rev[10] manuf_rev[4]
X (II) /dev/fb0: Detected FFB1, Z-buffer, Single-buffered.
X (II) /dev/fb0: BT9068 (PAC1) ramdac detected (with normal cursor control)
X (II) /dev/fb0: Detected Creator/Creator3D
Felix Gu [Sat, 31 Jan 2026 12:48:33 +0000 (20:48 +0800)]
fbdev: of_display_timing: Fix device node reference leak in of_get_display_timings()
Use for_each_child_of_node_scoped instead of for_each_child_of_node
to ensure automatic of_node_put on early exit paths, preventing
device node reference leak.
Fixes: cc3f414cf2e4 ("video: add of helper for display timings/videomode") Signed-off-by: Felix Gu <ustc.gu@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
Chintan Patel [Thu, 22 Jan 2026 03:16:35 +0000 (19:16 -0800)]
staging: fbtft: Make framebuffer registration message debug-only
The framebuffer registration message is informational only and not
useful during normal operation. Convert it to debug-level logging to
keep the driver quiet when working correctly.
Chintan Patel [Thu, 22 Jan 2026 03:16:34 +0000 (19:16 -0800)]
staging: fbtft: Fix build failure when CONFIG_FB_DEVICE=n
When CONFIG_FB_DEVICE is disabled, struct fb_info does
not provide a valid dev pointer. Direct dereferences of
fb_info->dev therefore result in build failures.
Fix this by avoiding direct accesses to fb_info->dev and
switching the affected debug logging to framebuffer helpers
that do not rely on a device pointer.
This fixes the following build failure reported by the
kernel test robot.
Fixes: a06d03f9f238 ("staging: fbtft: Make FB_DEVICE dependency optional") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202601110740.Y9XK5HtN-lkp@intel.com Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Chintan Patel <chintanlike@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
Chen Ni [Thu, 29 Jan 2026 04:07:14 +0000 (12:07 +0800)]
fbdev: au1100fb: Check return value of clk_enable() in .resume()
Check the return value of clk_enable() in au1100fb_drv_resume() and
return the error on failure.
This ensures the system is aware of the resume failure and can track
its state accurately.
do_con_write(), fbcon_redraw.*() invoke console_conditional_schedule()
which is a conditional scheduling point based on printk's internal
variables console_may_schedule. It may only be used if the console lock
is acquired for instance via console_lock() or console_trylock().
Prinkt sets the internal variable to 1 (and allows to schedule)
if the console lock has been acquired via console_lock(). The trylock
does not allow it.
The console_conditional_schedule() invocation in do_con_write() is
invoked shortly before console_unlock().
The console_conditional_schedule() invocation in fbcon_redraw.*()
original from fbcon_scroll() / vt's con_scroll() which originate from a
line feed.
In console_unlock() the variable is set to 0 (forbids to schedule) and
it tries to schedule while making progress printing. This is brand new
compared to when console_conditional_schedule() was added in v2.4.9.11.
In v2.6.38-rc3, console_unlock() (started its existence) iterated over
all consoles and flushed them with disabled interrupts. A scheduling
attempt here was not possible, it relied that a long print scheduled
before console_unlock().
Since commit 8d91f8b15361d ("printk: do cond_resched() between lines
while outputting to consoles"), which appeared in v4.5-rc1,
console_unlock() attempts to schedule if it was allowed to schedule
while during console_lock(). Each record is idealy one line so after
every line feed.
This console_conditional_schedule() is also only relevant on
PREEMPT_NONE and PREEMPT_VOLUNTARY builds. In other configurations
cond_resched() becomes a nop and has no impact.
I'm bringing this all up just proof that it is not required anymore. It
becomes a problem on a PREEMPT_RT build with debug code enabled because
that might_sleep() in cond_resched() remains and triggers a warnings.
This is due to
and vt_console_print() acquires a spinlock_t which does not allow a
voluntary schedule. There is no need to fb_scroll() to schedule since
console_flush_one_record() attempts to schedule after each line.
!PREEMPT_RT is not affected because the legacy printing thread is only
enabled on PREEMPT_RT builds.
Therefore I suggest to remove console_conditional_schedule().
Cc: Simona Vetter <simona@ffwll.ch> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Fixes: 5f53ca3ff83b4 ("printk: Implement legacy printer kthread for PREEMPT_RT") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Petr Mladek <pmladek@suse.com> # from printk() POV Signed-off-by: Helge Deller <deller@gmx.de>
Weigang He [Fri, 16 Jan 2026 09:57:51 +0000 (09:57 +0000)]
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
of_parse_phandle() returns a device_node with refcount incremented,
which is stored in 'entry' and then copied to 'native_mode'. When the
error paths at lines 184 or 192 jump to 'entryfail', native_mode's
refcount is not decremented, causing a refcount leak.
Fix this by changing the goto target from 'entryfail' to 'timingfail',
which properly calls of_node_put(native_mode) before cleanup.
Fixes: cc3f414cf2e4 ("video: add of helper for display timings/videomode") Cc: stable@vger.kernel.org Signed-off-by: Weigang He <geoffreyhe2@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
Vincent Mailhol [Sat, 10 Jan 2026 12:23:24 +0000 (13:23 +0100)]
video/logo: don't select LOGO_LINUX_MONO and LOGO_LINUX_VGA16 by default
Nowadays, nearly all systems have a color depth of eight or more and
are thus able to display the clut224 logo. This means that the
monochrome and vga16 logos will never be displayed on an average
machine and are thus just a waste of bytes.
Set CONFIG_LOGO_LINUX_MONO and CONFIG_LOGO_LINUX_VGA16 configuration
symbols to no by default.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
Vincent Mailhol [Thu, 8 Jan 2026 19:04:55 +0000 (20:04 +0100)]
video/logo: move logo selection logic to Kconfig
Now that the path to the logo file can be directly entered in Kbuild,
there is no more need to handle all the logo file selection in the
Makefile and the C files.
The only exception is the logo_spe_clut224 which is only used by the
Cell processor (found for example in the Playstation 3) [1]. This
extra logo uses its own different image which shows up on a separate
line just below the normal logo. Because the extra logo uses a
different image, it can not be factorized under the custom logo logic.
Move all the logo file selection logic to Kbuild (except from the
logo_spe_clut224.ppm), this done, clean-up the C code to only leave
one entry for each logo type (monochrome, 16-colors and 224-colors).
Vincent Mailhol [Thu, 8 Jan 2026 19:04:54 +0000 (20:04 +0100)]
video/logo: remove logo_mac_clut224
The logo_mac_clut224 depends on the runtime value MACH_IS_MAC being
true to be displayed. This makes that logo a one-of-a-kind, as it is
the only one whose selection can not be decided at compile time.
This dynamic logo selection logic conflicts with our upcoming plans to
simplify the logo selection code.
Considering that the logo_mac_clut224 is only used by the Macintosh
68k, a machine whose sales ended some thirty years ago and which thus
represents a very small user base, it is preferable to resolve the
conflict in favour of code simplicity.
Remove the logo_mac_clut224 so that the logo selection can be
statically determined at compile time.
The users who wish to continue using that logo can still download it
from [1] and add:
Vincent Mailhol [Thu, 8 Jan 2026 19:04:53 +0000 (20:04 +0100)]
sh: defconfig: remove CONFIG_LOGO_SUPERH_*
CONFIG_LOGO_SUPERH_MONO, CONFIG_LOGO_SUPERH_VGA16 and
CONFIG_LOGO_SUPERH_CLUT224 will be removed in an upcoming change but
are still referenced in some of the defconfig.
Remove all the occurrences of CONFIG_LOGO_SUPERH_*.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
Vincent Mailhol [Thu, 8 Jan 2026 19:04:52 +0000 (20:04 +0100)]
newport_con: depend on LOGO_LINUX_CLUT224 instead of LOGO_SGI_CLUT224
newport_show_logo() is only activated if CONFIG_LOGO_SGI_CLUT224 is
set (otherwise it is a NOP). This configuration item will be removed
in an upcoming change so instead, make it depend on LOGO_LINUX_CLUT224.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
Vincent Mailhol [Thu, 8 Jan 2026 19:04:51 +0000 (20:04 +0100)]
video/logo: allow custom logo
Some people like to replace the default Tux boot logo by an image of
their own. There exist a few tutorials here [1] and there [2]. But
this requires modifying the source tree which is a bit cumbersome.
Add a string entry in Kbuild for each of the logo categories
(monochrome, 16-colors, 224-colors). The string entry takes a path to
a .pbm or .ppm image allowing the user to more easily provide a custom
logo without having to modify the sources.
Add an help entry with a short hint on how to convert images to the
portable pixmap file format.
Update the Makefile accordingly. When converted to .c file, the logo
will have one of these fixed file name:
depending on the image type and this regardless of the name of the
.pgm/.ppm source filename. This will allow for further simplifications
in an upcoming change.
Vincent Mailhol [Thu, 8 Jan 2026 19:04:50 +0000 (20:04 +0100)]
video/logo: add a type parameter to the logo makefile function
When translating a portable pixmap file into a .c file, the pnmtologo
tool expects to receive the image type (either mono, vga16 or clut224)
as an argument under the -t option.
Currently, this information is stored in the file name. Because we
will allow for custom logo in an upcoming change, it is preferable to
decouple the image name from its type.
Add a new $2 parameter to the Makefile logo function which contains
the image type.
Update all the individual targets to provide this new argument.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Signed-off-by: Helge Deller <deller@gmx.de>
Vincent Mailhol [Thu, 8 Jan 2026 19:04:49 +0000 (20:04 +0100)]
video/logo: remove orphan .pgm Makefile rule
The kernel has no actual grey-scale logos. And looking at the git
history, it seems that there never was one (or maybe there was in the
pre-git history? I did not check that far…)
Remove the Makefile rule for the .pgm grey scale images.
Chintan Patel [Wed, 7 Jan 2026 04:42:57 +0000 (20:42 -0800)]
fbdev: sh_mobile_lcdc: Make FB_DEVICE dependency optional
The sh_mobile_lcdc driver exposes overlay configuration via sysfs, but the
core driver does not require CONFIG_FB_DEVICE.
Make overlay sysfs optional so that the driver can build and operate
even when FB_DEVICE is disabled. The kernel naturally ignores the
missing attribute group, preserving buildability and type safety.
Chintan Patel [Wed, 7 Jan 2026 04:42:56 +0000 (20:42 -0800)]
fbdev: omapfb: Make FB_DEVICE dependency optional
omapfb provides several sysfs interfaces for framebuffer configuration
and debugging, but these are not required for the core driver.
Remove the hard dependency on CONFIG_FB_DEVICE and make sysfs support
optional by using dev_of_fbinfo() to obtain the backing device at runtime.
When FB_DEVICE is disabled, sysfs operations are skipped while the code
still builds and is type-checked.
Chintan Patel [Wed, 7 Jan 2026 04:42:55 +0000 (20:42 -0800)]
staging: fbtft: Make FB_DEVICE dependency optional
fbtft provides sysfs interfaces for debugging and gamma configuration,
but these are not required for the core driver.
Drop the hard dependency on CONFIG_FB_DEVICE and make sysfs support
optional by using dev_of_fbinfo() at runtime. When FB_DEVICE is disabled,
sysfs operations are skipped while the code remains buildable and
type-checked.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de> Suggested-by: Helge Deller <deller@gmx.de> Reviewed-by: Helge Deller <deller@gmx.de> Signed-off-by: Chintan Patel <chintanlike@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de>
Chintan Patel [Wed, 7 Jan 2026 04:42:54 +0000 (20:42 -0800)]
fb: Add dev_of_fbinfo() helper for optional sysfs support
Add dev_of_fbinfo() to return the framebuffer struct device when
CONFIG_FB_DEVICE is enabled, or NULL otherwise.
This allows fbdev drivers to use sysfs interfaces via runtime checks
instead of CONFIG_FB_DEVICE ifdefs, keeping the code clean while
remaining fully buildable.
Hans de Goede [Sun, 21 Dec 2025 16:57:40 +0000 (17:57 +0100)]
fbdev: Use device_create_with_groups() to fix sysfs groups registration race
The fbdev sysfs attributes are registered after sending the uevent for
the device creation, leaving a race window where e.g. udev rules may
not be able to access the sysfs attributes because the registration is
not done yet.
Fix this by switching to device_create_with_groups(). This also results in
a nice cleanup. After switching to device_create_with_groups() all that
is left of fb_init_device() is setting the drvdata and that can be passed
to device_create[_with_groups]() too. After which fb_init_device() can
be completely removed.
Dropping fb_init_device() + fb_cleanup_device() in turn allows removing
fb_info.class_flag as they were the only user of this field.
Fixes: 5fc830d6aca1 ("fbdev: Register sysfs groups through device_add_group") Cc: stable@vger.kernel.org Cc: Shixiong Ou <oushixiong@kylinos.cn> Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Signed-off-by: Helge Deller <deller@gmx.de>
fbdev: smscufx: properly copy ioctl memory to kernelspace
The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from
userspace to kernelspace, and instead directly references the memory,
which can cause problems if invalid data is passed from userspace. Fix
this all up by correctly copying the memory before accessing it within
the kernel.
Guangshuo Li [Sun, 7 Dec 2025 07:25:32 +0000 (15:25 +0800)]
fbdev: rivafb: fix divide error in nv3_arb()
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
Linus Torvalds [Sat, 14 Feb 2026 03:33:39 +0000 (19:33 -0800)]
Merge tag 'bootconfig-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- Update the bootconfig parser to stop searching for a value when it
encounters a newline character
- Update the tests for bootconfig parser to ensure the good examples to
be parsed correctly by comparing the expected results
* tag 'bootconfig-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Check the parsed output of the good examples
bootconfig: Terminate value search if it hits a newline
Linus Torvalds [Sat, 14 Feb 2026 03:25:16 +0000 (19:25 -0800)]
Merge tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Add an entry into MAINTAINERS file for RUST versions of code
There's now RUST code for tracing and static branches. To
differentiate that code from the C code, add entries in for the
RUST version (with "[RUST]" around it) so that the right
maintainers get notified on changes.
- New bitmask-list option added to tracefs
When this is set, bitmasks in trace event are not displayed as hex
numbers, but instead as lists: e.g. 0-5,7,9 instead of 0000015f
- New show_event_filters file in tracefs
Instead of having to search all events/*/*/filter for any active
filters enabled in the trace instance, the file show_event_filters
will list them so that there's only one file that needs to be
examined to see if any filters are active.
- New show_event_triggers file in tracefs
Instead of having to search all events/*/*/trigger for any active
triggers enabled in the trace instance, the file
show_event_triggers will list them so that there's only one file
that needs to be examined to see if any triggers are active.
- Have traceoff_on_warning disable trace pintk buffer too
Recently recording of trace_printk() could go to other trace
instances instead of the top level instance. But if
traceoff_on_warning triggers, it doesn't stop the buffer with
trace_printk() and that data can easily be lost by being
overwritten. Have traceoff_on_warning also disable the instance
that has trace_printk() being written to it.
- Update the hist_debug file to show what function the field uses
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, a hist_debug file
exists for every event. This displays the internal data of any
histogram enabled for that event. But it is lacking the function
that is called to process one of its fields. This is very useful
information that was missing when debugging histograms.
- Up the histogram stack size from 16 to 31
Stack traces can be used as keys for event histograms. Currently
the size of the stack that is stored is limited to just 16 entries.
But the storage space in the histogram is 256 bytes, meaning that
it can store up to 31 entries (plus one for the count of entries).
Instead of letting that space go to waste, up the limit from 16 to
31. This makes the keys much more useful.
- Fix permissions of per CPU file buffer_size_kb
The per CPU file of buffer_size_kb was incorrectly set to read only
in a previous cleanup. It should be writable.
- Reset "last_boot_info" if the persistent buffer is cleared
The last_boot_info shows address information of a persistent ring
buffer if it contains data from a previous boot. It is cleared when
recording starts again, but it is not cleared when the buffer is
reset. The data is useless after a reset so clear it on reset too.
Internal changes:
- A change was made to allow tracepoint callbacks to have preemption
enabled, and instead be protected by SRCU. This required some
updates to the callbacks for perf and BPF.
perf needed to disable preemption directly in its callback because
it expects preemption disabled in the later code.
BPF needed to disable migration, as its code expects to run
completely on the same CPU.
- Have irq_work wake up other CPU if current CPU is "isolated"
When there's a waiter waiting on ring buffer data and a new event
happens, an irq work is triggered to wake up that waiter. This is
noisy on isolated CPUs (running NO_HZ_FULL). Trigger an IPI to a
house keeping CPU instead.
- Use proper free of trigger_data instead of open coding it in.
- Remove redundant call of event_trigger_reset_filter()
It was called immediately in a function that was called right after
it.
- Workqueue cleanups
- Report errors if tracing_update_buffers() were to fail.
- Make the enum update workqueue generic for other parts of tracing
On boot up, a work queue is created to convert enum names into
their numbers in the trace event format files. This work queue can
also be used for other aspects of tracing that takes some time and
shouldn't be called by the init call code.
The blk_trace initialization takes a bit of time. Have the
initialization code moved to the new tracing generic work queue
function.
- Skip kprobe boot event creation call if there's no kprobes defined
on cmdline
The kprobe initialization to set up kprobes if they are defined on
the cmdline requires taking the event_mutex lock. This can be held
by other tracing code doing initialization for a long time. Since
kprobes added to the kernel command line need to be setup
immediately, as they may be tracing early initialization code, they
cannot be postponed in a work queue and must be setup in the
initcall code.
If there's no kprobe on the kernel cmdline, there's no reason to
take the mutex and slow down the boot up code waiting to get the
lock only to find out there's nothing to do. Simply exit out early
if there's no kprobes on the kernel cmdline.
If there are kprobes on the cmdline, then someone cares more about
tracing over the speed of boot up.
- Clean up the trigger code a bit
- Move code out of trace.c and into their own files
trace.c is now over 11,000 lines of code and has become more
difficult to maintain. Start splitting it up so that related code
is in their own files.
Move all the trace_printk() related code into trace_printk.c.
Move the __always_inline stack functions into trace.h.
Move the pid filtering code into a new trace_pid.c file.
- Better define the max latency and snapshot code
The latency tracers have a "max latency" buffer that is a copy of
the main buffer and gets swapped with it when a new high latency is
detected. This keeps the trace up to the highest latency around
where this max_latency buffer is never written to. It is only used
to save the last max latency trace.
A while ago a snapshot feature was added to tracefs to allow user
space to perform the same logic. It could also enable events to
trigger a "snapshot" if one of their fields hit a new high. This
was built on top of the latency max_latency buffer logic.
Because snapshots came later, they were dependent on the latency
tracers to be enabled. In reality, the latency tracers depend on
the snapshot code and not the other way around. It was just that
they came first.
Restructure the code and the kconfigs to have the latency tracers
depend on snapshot code instead. This actually simplifies the logic
a bit and allows to disable more when the latency tracers are not
defined and the snapshot code is.
- Fix a "false sharing" in the hwlat tracer code
The loop to search for latency in hardware was using a variable
that could be changed by user space for each sample. If the user
change this variable, it could cause a bus contention, and reading
that variable can show up as a large latency in the trace causing a
false positive. Read this variable at the start of the sample with
a READ_ONCE() into a local variable and keep the code from sharing
cache lines with readers.
- Fix function graph tracer static branch optimization code
When only one tracer is defined for function graph tracing, it uses
a static branch to call that tracer directly. When another tracer
is added, it goes into loop logic to call all the registered
callbacks.
The code was incorrect when going back to one tracer and never
re-enabled the static branch again to do the optimization code.
- And other small fixes and cleanups"
* tag 'trace-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (46 commits)
function_graph: Restore direct mode when callbacks drop to one
tracing: Fix indentation of return statement in print_trace_fmt()
tracing: Reset last_boot_info if ring buffer is reset
tracing: Fix to set write permission to per-cpu buffer_size_kb
tracing: Fix false sharing in hwlat get_sample()
tracing: Move d_max_latency out of CONFIG_FSNOTIFY protection
tracing: Better separate SNAPSHOT and MAX_TRACE options
tracing: Add tracer_uses_snapshot() helper to remove #ifdefs
tracing: Rename trace_array field max_buffer to snapshot_buffer
tracing: Move pid filtering into trace_pid.c
tracing: Move trace_printk functions out of trace.c and into trace_printk.c
tracing: Use system_state in trace_printk_init_buffers()
tracing: Have trace_printk functions use flags instead of using global_trace
tracing: Make tracing_update_buffers() take NULL for global_trace
tracing: Make printk_trace global for tracing system
tracing: Move ftrace_trace_stack() out of trace.c and into trace.h
tracing: Move __trace_buffer_{un}lock_*() functions to trace.h
tracing: Make tracing_selftest_running global to the tracing subsystem
tracing: Make tracing_disabled global for tracing system
tracing: Clean up use of trace_create_maxlat_file()
...
Linus Torvalds [Fri, 13 Feb 2026 23:39:15 +0000 (15:39 -0800)]
Merge tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
Linus Torvalds [Fri, 13 Feb 2026 23:06:58 +0000 (15:06 -0800)]
Merge tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- prioritize ofpart in physmap-core probing
- conversions to scoped for each OF child loops
Bindings:
- The bulk of the changes consists of binding fixes/updates to
restrict the use of undefined properties, which was mostly
ineffective in the current form because of the nesting of partition
nodes and the lack of compatible strings
- YAML conversions and the addition of a dma-coherent property in the
cdns,hp-nfc driver
SPI NAND:
- support for octal DTR modes (8D-8D-8D)
- support for Foresee F35SQB002G chips
And small misc fixes"
* tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (65 commits)
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all()
mtd: spinand: fix NULL pointer dereference in spinand_support_vendor_ops()
mtd: rawnand: pl353: Add message about ECC mode
mtd: rawnand: pl353: Fix software ECC support
mtd: spinand: winbond: Remove unneeded semicolon
dt-bindings: mtd: cdns,hp-nfc: Add dma-coherent property
mtd: spinand: Disable continuous read during probe
mtd: spinand: add Foresee F35SQB002G flash support
mtd: spinand: winbond: W35N octal DTR support
mtd: spinand: Add octal DTR support
mtd: spinand: Warn if using SSDR-only vendor commands in a non SSDR mode
mtd: spinand: Give the bus interface to the configuration helper
mtd: spinand: Propagate the bus interface across core helpers
mtd: spinand: Add support for setting a bus interface
mtd: spinand: Gather all the bus interface steps in one single function
mtd: spinand: winbond: Configure the IO mode after the dummy cycles
mtd: spinand: winbond: Rename IO_MODE register macro
mtd: spinand: winbond: Fix style
mtd: spinand: winbond: Register W35N vendor specific operation
mtd: spinand: winbond: Register W25N vendor specific operation
...
Linus Torvalds [Fri, 13 Feb 2026 20:13:27 +0000 (12:13 -0800)]
Merge tag 'mm-hotfixes-stable-2026-02-13-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"Three MM hotfixes, all three are cc:stable"
* tag 'mm-hotfixes-stable-2026-02-13-07-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
procfs: fix possible double mmput() in do_procmap_query()
mm/page_alloc: skip debug_check_no_{obj,locks}_freed with FPI_TRYLOCK
mm/hugetlb: restore failed global reservations to subpool
Linus Torvalds [Fri, 13 Feb 2026 20:02:18 +0000 (12:02 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- in-order support in virtio core
- multiple address space support in vduse
- fixes, cleanups all over the place, notably dma alignment fixes for
non-cache-coherent systems
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits)
vduse: avoid adding implicit padding
vhost: fix caching attributes of MMIO regions by setting them explicitly
vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr()
vdpa/mlx5: reuse common function for MAC address updates
vdpa/mlx5: update mlx_features with driver state check
crypto: virtio: Replace package id with numa node id
crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req
crypto: virtio: Add spinlock protection with virtqueue notification
Documentation: Add documentation for VDUSE Address Space IDs
vduse: bump version number
vduse: add vq group asid support
vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls
vduse: take out allocations from vduse_dev_alloc_coherent
vduse: remove unused vaddr parameter of vduse_domain_free_coherent
vduse: refactor vdpa_dev_add for goto err handling
vhost: forbid change vq groups ASID if DRIVER_OK is set
vdpa: document set_group_asid thread safety
vduse: return internal vq group struct as map token
vduse: add vq group support
vduse: add v1 API definition
...
Linus Torvalds [Fri, 13 Feb 2026 19:31:15 +0000 (11:31 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"Loongarch:
- Add more CPUCFG mask bits
- Improve feature detection
- Add lazy load support for FPU and binary translation (LBT) register
state
- Fix return value for memory reads from and writes to in-kernel
devices
- Add support for detecting preemption from within a guest
- Add KVM steal time test case to tools/selftests
ARM:
- Add support for FEAT_IDST, allowing ID registers that are not
implemented to be reported as a normal trap rather than as an UNDEF
exception
- Add sanitisation of the VTCR_EL2 register, fixing a number of
UXN/PXN/XN bugs in the process
- Full handling of RESx bits, instead of only RES0, and resulting in
SCTLR_EL2 being added to the list of sanitised registers
- More pKVM fixes for features that are not supposed to be exposed to
guests
- Make sure that MTE being disabled on the pKVM host doesn't give it
the ability to attack the hypervisor
- Allow pKVM's host stage-2 mappings to use the Force Write Back
version of the memory attributes by using the "pass-through'
encoding
- Fix trapping of ICC_DIR_EL1 on GICv5 hosts emulating GICv3 for the
guest
- Preliminary work for guest GICv5 support
- A bunch of debugfs fixes, removing pointless custom iterators
stored in guest data structures
- A small set of FPSIMD cleanups
- Selftest fixes addressing the incorrect alignment of page
allocation
- Other assorted low-impact fixes and spelling fixes
RISC-V:
- Fixes for issues discoverd by KVM API fuzzing in
kvm_riscv_aia_imsic_has_attr(), kvm_riscv_aia_imsic_rw_attr(), and
kvm_riscv_vcpu_aia_imsic_update()
- Allow Zalasr, Zilsd and Zclsd extensions for Guest/VM
- Transparent huge page support for hypervisor page tables
- Adjust the number of available guest irq files based on MMIO
register sizes found in the device tree or the ACPI tables
- Add RISC-V specific paging modes to KVM selftests
- Detect paging mode at runtime for selftests
s390:
- Performance improvement for vSIE (aka nested virtualization)
- Completely new memory management. s390 was a special snowflake that
enlisted help from the architecture's page table management to
build hypervisor page tables, in particular enabling sharing the
last level of page tables. This however was a lot of code (~3K
lines) in order to support KVM, and also blocked several features.
The biggest advantages is that the page size of userspace is
completely independent of the page size used by the guest:
userspace can mix normal pages, THPs and hugetlbfs as it sees fit,
and in fact transparent hugepages were not possible before. It's
also now possible to have nested guests and guests with huge pages
running on the same host
- Maintainership change for s390 vfio-pci
- Small quality of life improvement for protected guests
x86:
- Add support for giving the guest full ownership of PMU hardware
(contexted switched around the fastpath run loop) and allowing
direct access to data MSRs and PMCs (restricted by the vPMU model).
KVM still intercepts access to control registers, e.g. to enforce
event filtering and to prevent the guest from profiling sensitive
host state. This is more accurate, since it has no risk of
contention and thus dropped events, and also has significantly less
overhead.
For more information, see the commit message for merge commit bf2c3138ae36 ("Merge tag 'kvm-x86-pmu-6.20' ...")
- Disallow changing the virtual CPU model if L2 is active, for all
the same reasons KVM disallows change the model after the first
KVM_RUN
- Fix a bug where KVM would incorrectly reject host accesses to PV
MSRs when running with KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled,
even if those were advertised as supported to userspace,
- Fix a bug with protected guest state (SEV-ES/SNP and TDX) VMs,
where KVM would attempt to read CR3 configuring an async #PF entry
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM
(for x86 only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL.
Only a few exports that are intended for external usage, and those
are allowed explicitly
- When checking nested events after a vCPU is unblocked, ignore
-EBUSY instead of WARNing. Userspace can sometimes put the vCPU
into what should be an impossible state, and spurious exit to
userspace on -EBUSY does not really do anything to solve the issue
- Also throw in the towel and drop the WARN on INIT/SIPI being
blocked when vCPU is in Wait-For-SIPI, which also resulted in
playing whack-a-mole with syzkaller stuffing architecturally
impossible states into KVM
- Add support for new Intel instructions that don't require anything
beyond enumerating feature flags to userspace
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2
- Add WARNs to guard against modifying KVM's CPU caps outside of the
intended setup flow, as nested VMX in particular is sensitive to
unexpected changes in KVM's golden configuration
- Add a quirk to allow userspace to opt-in to actually suppress EOI
broadcasts when the suppression feature is enabled by the guest
(currently limited to split IRQCHIP, i.e. userspace I/O APIC).
Sadly, simply fixing KVM to honor Suppress EOI Broadcasts isn't an
option as some userspaces have come to rely on KVM's buggy behavior
(KVM advertises Supress EOI Broadcast irrespective of whether or
not userspace I/O APIC supports Directed EOIs)
- Clean up KVM's handling of marking mapped vCPU pages dirty
- Drop a pile of *ancient* sanity checks hidden behind in KVM's
unused ASSERT() macro, most of which could be trivially triggered
by the guest and/or user, and all of which were useless
- Fold "struct dest_map" into its sole user, "struct rtc_status", to
make it more obvious what the weird parameter is used for, and to
allow fropping these RTC shenanigans if CONFIG_KVM_IOAPIC=n
- Bury all of ioapic.h, i8254.h and related ioctls (including
KVM_CREATE_IRQCHIP) behind CONFIG_KVM_IOAPIC=y
- Add a regression test for recent APICv update fixes
- Handle "hardware APIC ISR", a.k.a. SVI, updates in
kvm_apic_update_apicv() to consolidate the updates, and to
co-locate SVI updates with the updates for KVM's own cache of ISR
information
- Drop a dead function declaration
- Minor cleanups
x86 (Intel):
- Rework KVM's handling of VMCS updates while L2 is active to
temporarily switch to vmcs01 instead of deferring the update until
the next nested VM-Exit.
The deferred updates approach directly contributed to several bugs,
was proving to be a maintenance burden due to the difficulty in
auditing the correctness of deferred updates, and was polluting
"struct nested_vmx" with a growing pile of booleans
- Fix an SGX bug where KVM would incorrectly try to handle EPCM page
faults, and instead always reflect them into the guest. Since KVM
doesn't shadow EPCM entries, EPCM violations cannot be due to KVM
interference and can't be resolved by KVM
- Fix a bug where KVM would register its posted interrupt wakeup
handler even if loading kvm-intel.ko ultimately failed
- Disallow access to vmcb12 fields that aren't fully supported,
mostly to avoid weirdness and complexity for FRED and other
features, where KVM wants enable VMCS shadowing for fields that
conditionally exist
- Print out the "bad" offsets and values if kvm-intel.ko refuses to
load (or refuses to online a CPU) due to a VMCS config mismatch
x86 (AMD):
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure
- Add support for virtualizing ERAPS. Note, correct virtualization of
ERAPS relies on an upcoming, publicly announced change in the APM
to reduce the set of conditions where hardware (i.e. KVM) *must*
flush the RAP
- Ignore nSVM intercepts for instructions that are not supported
according to L1's virtual CPU model
- Add support for expedited writes to the fast MMIO bus, a la VMX's
fastpath for EPT Misconfig
- Don't set GIF when clearing EFER.SVME, as GIF exists independently
of SVM, and allow userspace to restore nested state with GIF=0
- Treat exit_code as an unsigned 64-bit value through all of KVM
- Add support for fetching SNP certificates from userspace
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when
emulating VMLOAD or VMSAVE on behalf of L2
- Misc fixes and cleanups
x86 selftests:
- Add a regression test for TPR<=>CR8 synchronization and IRQ masking
- Overhaul selftest's MMU infrastructure to genericize stage-2 MMU
support, and extend x86's infrastructure to support EPT and NPT
(for L2 guests)
- Extend several nested VMX tests to also cover nested SVM
- Add a selftest for nested VMLOAD/VMSAVE
- Rework the nested dirty log test, originally added as a regression
test for PML where KVM logged L2 GPAs instead of L1 GPAs, to
improve test coverage and to hopefully make the test easier to
understand and maintain
guest_memfd:
- Remove kvm_gmem_populate()'s preparation tracking and half-baked
hugepage handling. SEV/SNP was the only user of the tracking and it
can do it via the RMP
- Retroactively document and enforce (for SNP) that
KVM_SEV_SNP_LAUNCH_UPDATE and KVM_TDX_INIT_MEM_REGION require the
source page to be 4KiB aligned, to avoid non-trivial complexity for
something that no known VMM seems to be doing and to avoid an API
special case for in-place conversion, which simply can't support
unaligned sources
- When populating guest_memfd memory, GUP the source page in common
code and pass the refcounted page to the vendor callback, instead
of letting vendor code do the heavy lifting. Doing so avoids a
looming deadlock bug with in-place due an AB-BA conflict betwee
mmap_lock and guest_memfd's filemap invalidate lock
Generic:
- Fix a bug where KVM would ignore the vCPU's selected address space
when creating a vCPU-specific mapping of guest memory. Actually
this bug could not be hit even on x86, the only architecture with
multiple address spaces, but it's a bug nevertheless"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (267 commits)
KVM: s390: Increase permitted SE header size to 1 MiB
MAINTAINERS: Replace backup for s390 vfio-pci
KVM: s390: vsie: Fix race in acquire_gmap_shadow()
KVM: s390: vsie: Fix race in walk_guest_tables()
KVM: s390: Use guest address to mark guest page dirty
irqchip/riscv-imsic: Adjust the number of available guest irq files
RISC-V: KVM: Transparent huge page support
RISC-V: KVM: selftests: Add Zalasr extensions to get-reg-list test
RISC-V: KVM: Allow Zalasr extensions for Guest/VM
KVM: riscv: selftests: Add riscv vm satp modes
KVM: riscv: selftests: add Zilsd and Zclsd extension to get-reg-list test
riscv: KVM: allow Zilsd and Zclsd extensions for Guest/VM
RISC-V: KVM: Skip IMSIC update if vCPU IMSIC state is not initialized
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_rw_attr()
RISC-V: KVM: Fix null pointer dereference in kvm_riscv_aia_imsic_has_attr()
RISC-V: KVM: Remove unnecessary 'ret' assignment
KVM: s390: Add explicit padding to struct kvm_s390_keyop
KVM: LoongArch: selftests: Add steal time test case
LoongArch: KVM: Add paravirt vcpu_is_preempted() support in guest side
LoongArch: KVM: Add paravirt preempt feature in hypervisor side
...
projects / thirdparty / kernel / linux.git / log
