Alec L Davis [Tue, 20 Nov 2012 17:37:28 +0000 (17:37 +0000)]
Reduce CLI spam of "Extension Changed" device state messages.
Asterisk 11 follows RFC3265 that states that after every subscribe or resubscribe a notify should be sent.
Thus the console if filled continuously with the following after every subscribe;
== Extension Changed 8512[phones] new state IDLE for Notify User cisco1
In Asterisk 1.8 only changes would be sent. Thus only when a device state changed was anything emitted to the console.
fix:
Only print to console when device state isn't forced.
Matthew Jordan [Sun, 18 Nov 2012 20:22:14 +0000 (20:22 +0000)]
Reorder startup sequence to prevent lockups when process is sent to background
Although it is very rare and timing dependent, the potential exists for the
call to 'daemon' to cause what appears to be a deadlock in Asterisk during
startup. This can occur when a recursive mutex is obtained prior to the
daemon call executing. Since daemon uses fork to send the process into the
background, any threading primitives are unsafe to re-use after the call.
Implementations of pthread recursive mutexes are highly likely to store the
thread identifier of the thread that previously obtained the mutex. If
the mutex was locked prior to the fork, a subsequent unlock operation will
potentially fail as the thread identifier is no longer valid. Since the
mutex is still locked, all subsequent attempts to grab the mutex by other
threads will block.
This behavior exhibited itself most often when DEBUG_THREADS was enabled, as
this compile time option surrounds the mutexes in Asterisk with another
recursive mutex that protects the storage of thread related information. This
made it much more likely that a recursive mutex would be obtained prior to
daemon and unlocked after the call.
This patch does the following:
a) It backports a patch from Asterisk 11 that prevents the spawning of the
localtime monitoring thread. This thread is now spawned after Asterisk has
fully booted.
b) It re-orders the startup sequence to call daemon earlier during Asterisk
startup. This limits the potential of threading primitives being accessed
by initialization calls before daemon is called.
c) It removes calls to ast_verbose/ast_log/etc. prior to daemon being called.
Developers should send error messages directly to stderr prior to daemon,
as calls to ast_log may access recursive mutexes that store thread related
information.
d) It reorganizes when thread local storage is created for storing lock
information during the creation of threads. Prior to this patch, the
read/write lock protecting the list of threads in ast_register_thread would
utilize the lock in the thread local storage prior to it being initialized;
this patch prevents that.
On a very related note, this patch will *greatly* improve the stability of the
Asterisk Test Suite.
Matthew Jordan [Sun, 18 Nov 2012 14:27:20 +0000 (14:27 +0000)]
Add a test event that reports changes in ConfBridge state
This patch adds a test event to ConfBridge that reports transitions between
states in ConfBridge. This is used by tests in the Asterisk Test Suite
that verify state changes based on the entering/leaving of conference
participants.
........
Merged revisions 376414 from http://svn.asterisk.org/svn/asterisk/branches/10
Jonathan Rose [Fri, 16 Nov 2012 19:59:45 +0000 (19:59 +0000)]
monitor: prevent attempts to move/remove recordings skipped with 'i' and 'o'.
The i and o options for monitor skip the input and output sides of a recording
respectively. This patch addresses a problem in those options when monitor is
called without specifying a specific filename where monitor will try to move
the recording that was skipped. Since this usually doesn't exist when these
options are used, it would produce a warning when it does this in most cases,
but it is conceivable that there are use cases where this could result in
moving/removing a file unintentionally.
(closes issue ASTERISK-20641)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2190/
........
Merged revisions 376389 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376390 from http://svn.asterisk.org/svn/asterisk/branches/10
David M. Lee [Thu, 15 Nov 2012 23:38:44 +0000 (23:38 +0000)]
Migrate hashtest/hashtest2 to be unit tests.
Both hashtest and hashtest2 are manual testing apps that thrash hash
tables (hashtab and ao2 containers, respectively), by spinning up
several threads that randomly insert, delete, lookup and iterate over
the hash table. If the app doesn't crash, the hash table probably passes
the test. Those utils are not a part of the typical Asterisk build, so
they do not usually get compiled. This all makes them less that useful.
This patch removes those manual test programs and replaces them with
Asterisk unit test modules (test_{hashtab,astobj2}_thrash.so). It also
attempts to make the tests more deterministic.
* Rather than spinning up some number of threads that operate on the
hash table randomly, spin up four threads that concurrenly add,
remove, lookup and iterate over the hash table.
* Each thread checks the state of the hash table both during and after
execution, and indicates a test failure if things are not as expected.
* Each thread times out after 60 seconds to prevent deadlocking the unit
test run.
(closes issue ASTERISK-20505)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2189/
........
Merged revisions 376306 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376315 from http://svn.asterisk.org/svn/asterisk/branches/10
Jonathan Rose [Thu, 15 Nov 2012 23:03:41 +0000 (23:03 +0000)]
app_meetme: Fix channels lingering when hung up under certain conditions
Channels would get stuck and MeetMe would repeatedly display an Unable
to write frame to channel error in the conf_run function if hung up
during certain sound prompts such as during user count announcements.
This patch fixes that by reintroducing a hangup check in the meetme's
main loop (also in conf_run).
(closes issue ASTERISK-20486)
Reported by: Michael Cargile
Review: https://reviewboard.asterisk.org/r/2187/
Patches:
meetme_hangup_patch_ASTERISK-20486_v3.diff uploaded by Jonathan Rose (license 6182)
........
Merged revisions 376307 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376308 from http://svn.asterisk.org/svn/asterisk/branches/10
Rusty Newton [Thu, 15 Nov 2012 02:08:06 +0000 (02:08 +0000)]
Patch to play correct sound file when a voicemail's urgent status is removed
We were attempting to play "vm-urgent-removed", which didn't exist. Now we play "vm-marked-nonurgent" which exists
and is the correct sound file. Previous behavior was silence and a warning on the CLI.
(issue ASTERISK-20280)
(closes issue ASTERISK-20280)
Reported by: Tomo Takebe
Tested by: Rusty Newton
Patches:
asterisk20280.patch uploaded by Rusty Newton (license 5829)
........
Merged revisions 376262 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376263 from http://svn.asterisk.org/svn/asterisk/branches/10
Richard Mudgett [Wed, 14 Nov 2012 19:53:23 +0000 (19:53 +0000)]
Fix call files when astspooldir is relative.
Future dated call files are ignored when astspooldir is relative to the
current directory. The queue_file() assumed that the qdir needed to be
prepended if the given filename did not start with a '/'. If astspooldir
is relative it is not going to start from the root directory obviously so
it will not start with a '/'. The filename used in queue_file()
ultimately results in qdir prepended multiple times.
* Made queue_file() not prepend qdir if the filename contains a '/'.
(closes issue ASTERISK-20593)
Reported by: James Le Cuirot
Patches:
0004-Fix-future-call-files-from-relative-directories.patch (license #6439) patch uploaded by James Le Cuirot
........
Merged revisions 376232 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376233 from http://svn.asterisk.org/svn/asterisk/branches/10
Brent Eagles [Tue, 13 Nov 2012 18:48:43 +0000 (18:48 +0000)]
Patch to prevent stopping the active generator when it is not the silence
generator.
This patch introduces an internal helper function to safely check whether the
current generator is the one that is expected before deactivating it. The
current externally accessible ast_channel_stop_generator() function has been
modified to be implemented in terms of the new function.
(closes issue ASTERISK-19918)
Reported by: Eduardo Abad
........
Merged revisions 376199 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376208 from http://svn.asterisk.org/svn/asterisk/branches/10
Joshua Colp [Mon, 12 Nov 2012 20:45:50 +0000 (20:45 +0000)]
Properly check if the "Context" and "Extension" headers are empty in a ShowDialPlan action.
The code which handles the ShowDialPlan action wrongly assumed that a non-NULL return value
from the function which retrieves headers from an action indicates that the header has a
value. This is incorrect and the contents must be checked to see if they are blank.
Michael L. Young [Mon, 12 Nov 2012 20:16:57 +0000 (20:16 +0000)]
Fix Dynamic Hints Variable Substition - Underscore Problem
When adding a dynamic hint, if an extension contains an underscore no variable
subsitution is being performed.
This patch changes from checking if the extension contains an underscore to
checking if the extension begins with an underscore.
(closes issue ASTERISK-20639)
Reported by: Steven T. Wheeler
Tested by: Steven T. Wheeler, Michael L. Young
Patches:
asterisk-20639-dynamic-hint-underscore.diff
uploaded by Michael L. Young (license 5026)
Joshua Colp [Sun, 11 Nov 2012 17:08:58 +0000 (17:08 +0000)]
Remove a fixed size limitation for producing SDP and change how ICE support is disabled by default.
With ICE support enabled in chan_sip and a large number of interfaces on the system it was
possible for the produced SDP to be truncated due to some fixed size buffers. These buffers
have now been changed so they will dynamically grow as needed.
ICE support is now also enabled by default in res_rtp_asterisk to provide a smoother experience
for chan_motif users where it is required. To maintain the previous behavior in chan_sip it is
no longer enabled by default there.
Richard Mudgett [Thu, 8 Nov 2012 21:10:47 +0000 (21:10 +0000)]
chan_dahdi/SS7: Made reject incoming call for an in-alarm or blocked channel.
If a SS7 call comes in requesting a CIC that is in-alarm, the call is
accepted and connects if the extension exists in the dialplan. The call
does not have any audio.
* Made release the call immediately with circuit congestion cause.
(closes issue ASTERISK-20204)
Reported by: Tuan Le
Patches:
jira_asterisk_20204_v1.8.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 376058 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376059 from http://svn.asterisk.org/svn/asterisk/branches/10
Richard Mudgett [Thu, 8 Nov 2012 17:26:16 +0000 (17:26 +0000)]
Add MALLOC_DEBUG enhancements.
* Makes malloc() behave like calloc(). It will return a memory block
filled with 0x55. A nonzero value.
* Makes free() fill the released memory block and boundary fence's with
0xdeaddead. Any pointer use after free is going to have a pointer
pointing to 0xdeaddead. The 0xdeaddead pointer is usually an invalid
memory address so a crash is expected.
* Puts the freed memory block into a circular array so it is not reused
immediately.
* When the circular array rotates out a memory block to the heap it checks
that the memory has not been altered from 0xdeaddead.
* Made the astmm_log message wording better.
* Made crash if the DO_CRASH menuselect option is enabled and something is
found.
* Fixed a potential alignment issue on 64 bit systems.
struct ast_region.data[] should now be aligned correctly for all
platforms.
* Extracted region_check_fences() from __ast_free_region() and
handle_memory_show().
Prior to this change, a common method for determining if a timeout
was reached was to call a function such as ast_waitfor_n() and inspect
the out parameter that told how many milliseconds were left, then use
that as the input to ast_waitfor_n() on the next go-around.
The problem with this is that in some cases, submillisecond timeouts
can occur, resulting in the out parameter not decreasing any. When this
happens thousands of times, the result is that the timeout takes much
longer than intended to be reached. As an example, I had a situation where
a 3 second timeout took multiple days to finally end since most wakeups
from ast_waitfor_n() were under a millisecond.
This patch seeks to fix this pattern throughout the code. Now we log the
time when an operation began and find the difference in wall clock time
between now and when the event started. This means that sub-millisecond timeouts
now cannot play havoc when trying to determine if something has timed out.
Part of this fix also includes changing the function ast_waitfor() so that it
is possible for it to return less than zero when a negative timeout is given
to it. This makes it actually possible to detect errors in ast_waitfor() when
there is no timeout.
(closes issue ASTERISK-20414)
reported by David M. Lee
Joshua Colp [Tue, 6 Nov 2012 12:09:45 +0000 (12:09 +0000)]
Fix a bug where our Motif ICE candidates were not quite proper, and make us more forgiving.
An issue was reported on the mailing list where calling would result in an "Incomplete
ICE-UDP candidate received on session" error message. This is the result of the ICE-UDP
candidate code not placing a "network" attribute within the candidates. This is now done.
To increase compatibility though I have removed the requirement for the "network" attribute
to exist within ICE-UDP candidates that are received since we don't actually require the
value.
Reported on the mailing list by Jean-Denis Girard.
Matthew Jordan [Mon, 5 Nov 2012 23:09:30 +0000 (23:09 +0000)]
Refactor ast_timer_ack to return an error and handle the error in timer users
Currently, if an acknowledgement of a timer fails Asterisk will not realize
that a serious error occurred and will continue attempting to use the timer's
file descriptor. This can lead to situations where errors stream to the
CLI/log file. This consumes significant resources, masks the actual problem
that occurred (whatever caused the timer to fail in the first place), and
can leave channels in odd states.
This patch propagates the errors in the timing resource modules up through
the timer core, and makes users of these timers handle acknowledgement
failures. It also adds some defensive coding around the use of timers
to prevent using bad file descriptors in off nominal code paths.
Note that the patch created by the issue reporter was modified slightly for
this commit and backported to 1.8, as it was originally written for
Asterisk 10.
Matthew Jordan [Sun, 4 Nov 2012 03:09:26 +0000 (03:09 +0000)]
Don't attempt to purge sessions when no sessions exist
Manager's tcp/tls objects have a periodic function that purge old manager
sessions periodically. During shutdown, the underlying container holding
those sessions can be disposed of and set to NULL before the tcp/tls periodic
function is stopped. If the periodic function fires, it will attempt to
iterate over a NULL container.
This patch checks for whether or not the sessions container exists before
attempting to purge sessions out of it. If the sessions container is NULL,
we simply return.
Note that this error was also caught by the Asterisk Test Suite.
........
Merged revisions 375800 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375801 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Sun, 4 Nov 2012 02:43:25 +0000 (02:43 +0000)]
Only deref a reserved gateway session if we actually reserved one
Its perfectly acceptable to have a gateway session unreserved when we go to
first allocate one. Unreffing the reserved gateway session - when its NULL -
will result in an assertion error.
This problem was caught by the Asterisk Test Suite (once we had enough of the
debugging flags enabled)
........
Merged revisions 375797 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Sun, 4 Nov 2012 02:36:55 +0000 (02:36 +0000)]
Properly clean up manager resources on exit
This patch does two things:
1) It properly unregisters the manager CLI commands
2) It cleans up AMI users on exit. Prior to this patch, the AMI users
were not being disposed of properly, resulting in a memory leak.
Matthew Jordan [Sun, 4 Nov 2012 01:17:25 +0000 (01:17 +0000)]
Properly finalize prepared SQLite3 statements to prevent memory leak
The AstDB uses prepared SQLite3 statements to retrieve data from the SQLite3
database. These statements should be finalized during Asterisk shutdown so
that the SQLite3 database can be properly closed. Failure to finalize the
statements results in a memory leak and a failure when closing the database.
This patch fixes those issues by ensuring that all prepared statements are
properly finalized at shutdown.
Matthew Jordan [Sun, 4 Nov 2012 01:03:13 +0000 (01:03 +0000)]
Blocked revisions 375759
........
Fix memory leak when unloading XML documentation
This patch is a modified version of a patch originally committed for the
Asterisk 11 branch in r375756. A portion of that patch, that fixed the
memory leak during unloading XML documentation, applies to branches 1.8
and 10 as well.
The patch for this issue was modified for these two branches.
Matthew Jordan [Sun, 4 Nov 2012 00:47:17 +0000 (00:47 +0000)]
Fix memory leaks in XML documentation
This patch fixes two memory leaks:
1) When building XML documentation items, the 'name' attribute was extracted
from XML elements but not properly freed after being copied into the item
being built.
2) When unloading XML documentation, the doctree container objects were not
properly freed.
This patch corrects these memory leaks. Note that this patch was modified
slightly for this commmit, as the case where the 'name' attribute doesn't
exist also wasn't handled in the item construction. This patch also checks
for that attribute not existing.
Matthew Jordan [Sat, 3 Nov 2012 23:52:54 +0000 (23:52 +0000)]
Prevent multiple CDR batches from conflicting when scheduling the CDR write
The Asterisk Test Suite caught an error condition where a scheduled CDR batch
write can be deleted twice if two channels attempt to post their CDRs at the
same time. The batch CDR mutex is locked while the CDRs are appended to the
current batch list; however, it is unlocked prior to actually scheduling the
CDR write. As such, two threads can attempt to remove the currently scheduled
batch write at the same time, resulting in an assertion error.
This patch extends the time that the mutex is locked to encompass actually
scheduling the write. This prevents two threads from unscheduling the
currently scheduled write at the same time.
........
Merged revisions 375727 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375728 from http://svn.asterisk.org/svn/asterisk/branches/10
Andrew Latham [Sat, 3 Nov 2012 03:17:49 +0000 (03:17 +0000)]
Doxygen Updates
Replace links to missing text files removed in the 1.6.x series with links to the wiki. Doxygen can handle URLs fine, don't atempt to quote them. Also update the wiki link in the Readme to get everyone on the same page.
(issue ASTERISK-20259)
........
Merged revisions 375698 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375699 from http://svn.asterisk.org/svn/asterisk/branches/10
Damien Wedhorn [Fri, 2 Nov 2012 20:56:43 +0000 (20:56 +0000)]
Fix for chan_skinny leaving RTP ports open
Skinny wasn't closing RTP sockets. This patch includes ast_rtp_instance_stop before
ast_rtp_instance_destroy which fixes the problem. Also add destroy for VRTP (which
I believe is unused, but exists).
chan_misdn: Timer primitives must be handled first.
The frm->addr is a different "address space" than the stack/instance
address of other Lx primitives. The test for B channel instance address
could fail.
Patches:
patch01_timers.diff (license #6372) patch uploaded by Guenther Kelleter
* An NT-PTMP cannot de/establish L2 since it doesn't know the TEIs.
* On NT-PTP L2 is started when L1 is finally active in handle_l1.
* L2 deactivation logging cleanup.
* L2 aggregate link status is unknown for NT-PTMP, show as "UNKN".
* Removed unused functions and code for L2 handling.
Patches:
patch03_L2estab.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
Sending PH prim via lower_id layer (3 or 1) simply does not work. For TE
(3) it returns an error (len=-6) which is not evaluated by handle_l1(), so
the L1 layer status ends up wrong. Instead PH must be sent via L4, only
then does it reach L1 without an error message.
And NT PH prims only reach L1 when they are sent to layer 2 id.
--> use upper_id to send PH primitives.
* Check for errors in PH_(DE)ACTIVATE | CONFIRM.
* Debug messages are improved.
* The lower_id is now not used for anything, except: Why is lower_id layer
deleted when it wasn't created? I removed this code since it looks very
wrong.
Patches:
patch04_l1activation.diff (license #6372) patch uploaded by Guenther Kelleter
If you make 2 calls out an NT PTMP port which is not connected to any
phone, the B channel associated with that call becomes unusable until
Asterisk is restarted.
The problem is the EVENT_SETUP is queued when L1 is not up in
misdn_lib_send_event(). If L1 cannot be activated the event won't be
dequeued. It gets even worse when the call is hung up. The queued
EVENT_SETUP will be overwritten by an EVENT_DISCONNECT. The reserved B
channel then will never be freed. If later someone connects a phone to
the port, L1 will eventually activate and the queued EVENT_DISCONNECT is
sent down the stack. However, it is ignored because it is the wrong call
state.
The real fix would be that activation and queueing for a new SETUP is done
by the NT stack. But since it doesn't, the workaround must be removed
because it doesn't always work.
Fix: The event is no longer queued but immediately sent to the stack. If
L1 cannot be activated, the L3 state machine that was started by the
EVENT_SETUP will do its work, i.e. a timeout will release the B channel
properly. The SETUP possibly cannot be sent the first time but is resent
by T303 in case L1 could be activated.
Patches:
patch05_bchan-loss.diff (license #6372) patch uploaded by Guenther Kelleter
Modified
Fix Wrong Result In Debug Message For SDP Origin Processing
While looking at some debug logs, I noticed that it was being reported that the
SDP origin line was unsupported or failed. Upon looking into this on my local
machine, I found that I too was getting this debug message yet everything seemed
to be getting processed properly. What was discovered is, that, the variable to
determine what is displayed in the debug message for the SDP line that was
processed, was not being set for the origin line when the result was successful.
This patch fixes this and was tested on local machine.
........
Merged revisions 375594 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375601 from http://svn.asterisk.org/svn/asterisk/branches/10
Jonathan Rose [Thu, 1 Nov 2012 14:52:23 +0000 (14:52 +0000)]
chan_sip: Fix a bug causing SIP reloads to remove all entries from the registry
A regression was introduced in chan_sip by changes to sip reload introduced by
r349097. That patch moved peer purging from the beginning of the reload to
after the general configuration was finished. This patch fixes that by undoing
the repositioning of the original peer purging code and using a similar
function after performing general configuration that purges only autocreated
peers that were created when persist mode isn't enabled.
(closes issue ASTERISK-20611)
Reported by: Alisher
Review: https://reviewboard.asterisk.org/r/2171/
Joshua Colp [Wed, 31 Oct 2012 18:00:32 +0000 (18:00 +0000)]
Fix an issue with res_http_websocket where the chan_sip WebSocket handler could not be registered.
On some systems the optional API support uses the GCC compiler attribute "weakref" to provide its
functionality. This code changes the function names and prefixes "__" to the front. The
res_http_websocket exports file did not take this into account, thereby not allowing those functions
to be global and ultimately found.
Matthew Jordan [Wed, 31 Oct 2012 14:49:33 +0000 (14:49 +0000)]
Properly extract the Body information of an EWS calendar item
Unlike all other calendar modules, res_calendar_ews fails to extract the Body
information for a calendar item. This is due, in part, to a quirk in the
schema in the XML - not only does a CalendarItem contain a Body element, but
the CalendarItem exists as a descendant of a different Body element. The neon
parser was erroneously skipping all Body elements.
This patch fixes that by bypassing Body elements that are not a child of
CalendarItem, and parsing the Body element out if it is a child.
Note that the original patch by Terry Wilson only needed slight modifications
to make it properly pull the Body information out; as such, while I've linked
to the patch that I uploaded for Dmitry, I've attributed the patch to Terry.
(closes issue ASTERISK-19738)
Reported by: Dmitry Burilov
Tested by: Dmitry Burilov
patches:
calendar_ews_body_2012_10_29.diff uploaded by Terry Wilson (license 6283)
........
Merged revisions 375528 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375531 from http://svn.asterisk.org/svn/asterisk/branches/10
Jonathan Rose [Tue, 30 Oct 2012 14:58:19 +0000 (14:58 +0000)]
confbridge: Fix a bug which made conferences not record with AMI/CLI commands
When confbridge was changed to handle conference status with a state machine in
r374658. The function responsible for starting recording for a conference was
refactored with the function actually responsible for launching the recording
thread being split into a function with another name. The old function name was
still used for manually started recordings through AMI or CLI. This patch fixes
that by switching which function is used to start recording the conference.
(closes issue ASTERISK-20601)
Reported by: Vilius
Patches:
confbridge_mixmonitor.diff uploaded by Jonathan Rose (license 6182)
........
Merged revisions 375470 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Tue, 30 Oct 2012 02:22:20 +0000 (02:22 +0000)]
Ensure that the Queue application tracks busy members in off nominal situations
There are a few code paths where the Queue application fails to count a paused
or in use queue member as being 'busy'. This can cause callers to get stuck
in the Queue until a paused agent unpauses themselves.
Mark Michelson [Mon, 29 Oct 2012 21:23:25 +0000 (21:23 +0000)]
Prevent resetting of NATted realtime peer address on reload.
If a "sip reload" is issued for a SIP peer, then his
IP address will be cleared, thus resulting in forgetting the
public IP address. Asterisk will then attempt to route SIP
traffic to the private IP address.
The fix here is to make "sip reload" ignore realtime peers
when "host = dynamic" is spotted. Realtime peers can now only
have their IP address reset if they have gone from being not
dynamic to being dynamic.
(closes issue ASTERISK-18203)
reported by daren ferreira
(closes issue ASTERISK-20572)
reported by JoshE
Patches:
fix_nat_realtime.diff uploaded by JoshE (license #6075)
........
Merged revisions 375415 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375417 from http://svn.asterisk.org/svn/asterisk/branches/10
Richard Mudgett [Mon, 29 Oct 2012 15:54:42 +0000 (15:54 +0000)]
chan_dahdi: Fix segfault dereferencing a NULL tech_pvt.
The tech support customer was using the AMI Redirect action shortly after
a call was placed. While the channel tried to do an ast_read(), the
masquerade resulting from the channel redirect took place. The masquerade
in the middle of the ast_read() resulted in the segfault.
Jonathan Rose [Mon, 22 Oct 2012 20:04:02 +0000 (20:04 +0000)]
core: Fix a memory leak in app.c from an early return
ast_app_group_match_get_count allocates memory with the regcomp
function and we previously forgot to free it when bailing out
due to a regex compilation failure against category.
Jonathan Rose [Thu, 18 Oct 2012 21:17:15 +0000 (21:17 +0000)]
app_queue: Make ordering of rrmemory/rrordered persist over add/remove members
Prior to this patch, adding, removing or reloading members to rrmemory would
cause the order to become completely jumbled. Now it behaves more or less like
rrordered other than the fact that it stores the members on a hash table rather
than a linked list. This patch also prevents removal of members and member
reloads from jumbling rrordered queues.
(issue AST-989)
Reported by: Thomas Arimont
Review: https://reviewboard.asterisk.org/r/2164/
........
Merged revisions 375216 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 375217 from http://svn.asterisk.org/svn/asterisk/branches/10
Richard Mudgett [Thu, 18 Oct 2012 20:02:02 +0000 (20:02 +0000)]
build_tools: Allow Asterisk to report git SHAs in version string.
Make git more attractive for managing work-in-progress. Especially
convenient when a potential patch set needs to be tested on multiple
platforms since one can use git to keep all the test environments in sync
independent of a subversion server.
Now the Asterisk version will show the exact git SHA5 that was used when
building (still appended by "M" if there are local modifications) from a
git clone of the Asterisk repository so the developer can more easily know
what is actually under test.
This has zero impact for those not using git with the exception of an
extra test in the configure script to gather git's path. This is
necessary to prevent "sudo make install" from failing since git may not be
in the path in make's shell environment.
Kinsey Moore [Wed, 17 Oct 2012 19:00:35 +0000 (19:00 +0000)]
Ensure Asterisk fails TCP/TLS SIP calls when certificate checking fails
When placing a call to a TCP/TLS SIP endpoint whose certificate is not
signed by a configured CA certificate, Asterisk would issue a warning
and continue to process the call as if there was not an issue with the
certificate. Asterisk now properly fails the call if the certificate
fails verification or if the certificate does not exist when
certificate checking is enabled (the default behavior).
Mark Michelson [Mon, 15 Oct 2012 21:15:09 +0000 (21:15 +0000)]
Fix some potential misuses of ast_str in the code.
Passing an ast_str pointer by value that then calls
ast_str_set(), ast_str_set_va(), ast_str_append(), or
ast_str_append_va() can result in the pointer originally
passed by value being invalidated if the ast_str had
to be reallocated.
This fixes places in the code that do this. Only the
example in ccss.c could result in pointer invalidation
though since the other cases use a stack-allocated ast_str
and cannot be reallocated.
I've also updated the doxygen in strings.h to include
notes about potential misuse of the functions mentioned
previously.
Tzafrir Cohen [Sun, 14 Oct 2012 11:57:11 +0000 (11:57 +0000)]
Update config.guess and config.sub: 2012-10-10
Update config.guess and config.sub to revision fb456b34ef4aa02b95dc6be69aaa66fa94a844fb from the savannah.gnu.org git
repo. Adds support for e.g. aarch64 (ARM 64bit).
Kinsey Moore [Fri, 12 Oct 2012 21:57:29 +0000 (21:57 +0000)]
Avoid a segfault on invalid format names
If a format name was not found by ast_getformatbyname, a NULL pointer
would be passed into ast_format_rate and immediately dereferenced.
This ensures that a valid pointer is used since the structure is
already allocated on the stack.
(closes issue DPH-523) Reported-by: Steve Pitts
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374932 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Mark Michelson [Fri, 12 Oct 2012 16:20:15 +0000 (16:20 +0000)]
Do not use a FILE handle when doing SIP TCP reads.
This is used to solve an issue where a poll on a file
descriptor does not necessarily correspond to the readiness
of a FILE handle to be read.
This change makes it so that for TCP connections, we do a
recv() on the file descriptor instead.
Because TCP does not guarantee that an entire message or even
just one single message will arrive during a read, a loop has
been introduced to ensure that we only attempt to handle a
single message at a time. The tcptls_session_instance structure
has also had an overflow buffer added to it so that if more
than one TCP message arrives in one go, there is a place to
throw the excess.
Huge thanks goes out to Walter Doekes for doing extensive review
on this change and finding edge cases where code could fail.
(closes issue ASTERISK-20212)
reported by Phil Ciccone
Matthew Jordan [Thu, 11 Oct 2012 15:44:00 +0000 (15:44 +0000)]
Fix incorrect billing duration reported when batch mode is enabled
Similar to r369351, the billing duration can be skewed when batch mode is
enabled. This happened much more rarely than the duration, as it only
occured when the call was answered (thereby indicating an actual answer
time) and immediately hung up on (indicating a billsec of 0). Since
a billing time of '0' can either mean that the call immediately ended
or that the CDR was improperly answered, we have to use additional information
to know whether or not we can trust the CDR billsec value. Prior to this
patch, we looked to see if we had a valid answer time. If we did, and
billsec was zero, we used the current time to calculate what billsec value
we could from the CDR being written. If batch mode is enabled, this will
incorrectly report a billsec value being much greater than the actual
duration of the call.
Instead of relying on the presence of an answer time to know whether or not
we can re-calculate the billsec for the CDR, we now also use the presence
of the CDR's end time to know if we need to re-calculate or whether we can
trust the billsec value that we have. This prevents erroneous jumps in the
billsec value, while still making sure that in the worst case, some billing
time will be calculated.
(closes issue AST-1016)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
........
Merged revisions 374843 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374844 from http://svn.asterisk.org/svn/asterisk/branches/10
Mark Michelson [Thu, 11 Oct 2012 15:31:10 +0000 (15:31 +0000)]
Don't make chan_sip export global symbols.
During testing, it was discovered that having chan_sip
export global symbols was problematic.
The biggest problem was that load order was affected.
Trying to use realtime could be problematic since in
all likelihood the necessary realtime driver(s) would
not be loaded before chan_sip.
In addition, it was found that it was impossible to
use the Digium Phone Module for Asterisk since it
must be loaded before chan_sip since it must hook
into chan_sip's configuration parsing.
The solution is to use a virtual table in the same
manner that other modules in Asterisk do, like
app_voicemail.
Richard Mudgett [Wed, 10 Oct 2012 21:03:29 +0000 (21:03 +0000)]
app_queue: Made pass connected line updates from the caller to ringing queue members.
Party A calls Party B
Party B puts Party A on hold.
Party B calls a queue.
Ringing queue member D sees Party B identification.
Party B transfers Party A to the queue.
Queue member D does not get a connected line update for Party A.
Queue member D answers the call and still sees Party B information.
However, if Party A later transfers the call to Party C then queue member
D gets a connected line update for Party C.
* Made pass connected line updates from the caller to queue members while
the queue members are ringing.
(closes issue AST-1017)
Reported by: Thomas Arimont
(closes issue ABE-2886)
Reported by: Thomas Arimont
Tested by: rmudgett
........
Merged revisions 374801 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 374802 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374803 from http://svn.asterisk.org/svn/asterisk/branches/10
Kinsey Moore [Wed, 10 Oct 2012 13:35:53 +0000 (13:35 +0000)]
Fix segfault regression from r370681
Due to usage of ast_hook_send_action, AMI action handling code should
be able to handle a NULL mansession->session. This would cause a crash
on NULL dereference if action_originate was called from
ast_hook_send_action.
Richard Mudgett [Tue, 9 Oct 2012 22:21:54 +0000 (22:21 +0000)]
Fix execution of 'i' extension due to uninitialized variable.
The fix for ASTERISK-18243 added code that could potentially use
dst_exten[] uninitialized. As a result the 'i' exten may not be executed
when it should.
(closes issue ASTERISK-20455)
Reported by: Richard Miller
Patches:
pbx-1.8.16.0.diff (license #5685) patch uploaded by Richard Miller
Made some cosmetic modifications.
........
Merged revisions 374758 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374763 from http://svn.asterisk.org/svn/asterisk/branches/10
Richard Mudgett [Mon, 8 Oct 2012 21:21:37 +0000 (21:21 +0000)]
Fix deletion of unopenable spool files.
If scan_service() cannot open the spool file, it logs a message saying
that it will delete the file and calls remove_from_queue() to do it.
However, remove_from_queue() fails to delete the spool file because struct
outgoing has not yet been fully initialized.
* Merged allocating a new struct outgoing and init_outgoing() into
new_outgoing(). Allocation is initialization.
* Made apply_outgoing() not initialize the spool filename in struct
outgoing.
* Made apply_outgoing() call ast_trim_blanks() and ast_skip_blanks()
rather than manually inlining them.
* Reduced indentation levels in apply_outgoing().
* Fixed a garbled comment in remove_from_queue().
* Reworked scan_service() to simplify it.
(closes issue ASTERISK-17231)
Reported by: David Chappell
Patches:
spool_open_failure.diff (license #4997) patch uploaded by David Chappell
Started with this patch.
........
Merged revisions 374686 from http://svn.asterisk.org/svn/asterisk/branches/1.8
* Fixed some memory leaks on off nominal paths in init_outgoing() when
merging into the new_outgoing() function dealing with o->capabilities.
........
Merged revisions 374695 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Mon, 8 Oct 2012 20:38:58 +0000 (20:38 +0000)]
Disable ICE support by default
Since there are a number of legacy devices out there that fail to handle ICE
candidates properly (which is a nice way of saying something much uglier),
disable it by default.
Support for ICE candidates can be enabled in rtp.conf using the icesupport
setting.
Matthew Jordan [Mon, 8 Oct 2012 18:47:10 +0000 (18:47 +0000)]
Resolve issues in ConfBridge regarding marked, waitmarked, and unmarked users
Thank's to Neil Tallim (flan)'s tireless testing, issue reporting, and patches
it became clear that app_confbridge had some complex logic in how it handled
interactions between marked, waitmarked, and unmarked users. In particular,
there were some areas in which the interactions between the users resulted
in inconsistent behavior, and app_confbridge was missing logic in how to handle
some corner cases. Some areas included:
* Poor handling of mixing unmarked and waitmarked users
* Inconsistencies in how MOH and muting was applied to various users
* Handling of various announcements for different user profile options
flan's patches seem to fix the various issues, but highlighted how hard the
code could be to maintain. In an attempt to make things easier to maintain and
to more fully enumerate the various cases that exist, this patch breaks up the
logic into a state machine-like setup.
Please note that the various state transitioned are documented on the Asterisk
wiki:
Note that for the following issues, mjordan uploaded the patch, although it
was written by twilson. Any contributor license discrepency is due to that.
(closes issue ASTERISK-20181)
Reported by: Jonathan White
Tested by: Jonathan White
patches:
bugASTERISK-19562_ASTERISK-19726_ASTERISK-20181.patch uploaded by twilson (license 6283)
........
Merged revisions 374652 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Mon, 8 Oct 2012 00:41:01 +0000 (00:41 +0000)]
pjproject: Fix for Solaris builds. Do not undef s_addr.
pjproject, in order to solve build problems on Windows [1], undefines s_addr in
one of it's headers that is included in res_rtp_asterisk.c. On Solaris s_addr
is not a structure member, but defined to map to the real strucuture member,
therefore when building on Solaris it's possible to get build errors like:
[CC] res_rtp_asterisk.c -> res_rtp_asterisk.o
In file included from /export/home/admin/asterisk-11-svn/include/asterisk/stun.h:29,
from res_rtp_asterisk.c:51:
/export/home/admin/asterisk-11-svn/include/asterisk/network.h: In function `inaddrcmp':
/export/home/admin/asterisk-11-svn/include/asterisk/network.h:92: error: structure has no member named `s_addr'
/export/home/admin/asterisk-11-svn/include/asterisk/network.h:92: error: structure has no member named `s_addr'
res_rtp_asterisk.c: In function `ast_rtp_on_ice_tx_pkt':
res_rtp_asterisk.c:706: warning: dereferencing type-punned pointer will break strict-aliasing rules
res_rtp_asterisk.c:710: warning: dereferencing type-punned pointer will break strict-aliasing rules
res_rtp_asterisk.c: In function `rtp_add_candidates_to_ice':
res_rtp_asterisk.c:1085: error: structure has no member named `s_addr'
make[2]: *** [res_rtp_asterisk.o] Error 1
make[1]: *** [res] Error 2
make[1]: Leaving directory `/export/home/admin/asterisk-11-svn'
gmake: *** [_cleantest_all] Error 2
Unfortunately, in order to make this work, I also had to make sure pjproject
only used the typdef pj_in_addr and not the struct pj_in_addr so that when
building Asterisk I could "typedef struct in_addr pj_in_addr". It's possible
then that the library and users of those interfaces in Asterisk have a different
idea about the type of the argument, while on the surface it looks like they are
all 32 bit big endian values.
[1] http://trac.pjsip.org/repos/changeset/484
(issues ASTERISK-20366)
Reported by: Ben Klang
Tested by: Ben Klang, mjordan
patches:
0001-pjproject-Fix-for-Solaris-builds.-Do-not-undef-s.patch uploaded by Shaun Ruffell (license 5417)
Matthew Jordan [Sun, 7 Oct 2012 17:31:53 +0000 (17:31 +0000)]
Trivial patch to make 'best_score' defined for all architectures.
Fixes trivial build error on Solaris:
acl.c: In function `get_local_address':
acl.c:196: error: `best_score' undeclared (first use in this function)
acl.c:196: error: (Each undeclared identifier is reported only once
acl.c:196: error: for each function it appears in.)
make[2]: *** [acl.o] Error 1
(issue ASTERISK-20366)
Reported by: Ben Klang
Tested by: Ben Klang
patches:
0002-main-acl.c-Trivial.-best_score-should-be-defined-for.patch by Shaun Ruffell (license 5417)
Matthew Jordan [Sat, 6 Oct 2012 03:20:56 +0000 (03:20 +0000)]
Handle capability stanzas that fail to provide node or version information
While XEP-0115 states that the node and ver attributes are both required, some
devices fail to provide either field. Prior to this patch, failure to provide
the node or ver attribute would cause a crash in res_xmpp. While failing to
provide the node or ver attribute is technically invalid, since this
information is not utilized by Asterisk except for reporting purposes, for
interoperability reasons, we continue to process the capability stanza anyways.
(closes issue ASTERISK-20495)
Reported by: Martin W
Tested by: Martin W
patches:
20495.patch uploaded by Martin W (license #6434)
Matthew Jordan [Sat, 6 Oct 2012 01:44:41 +0000 (01:44 +0000)]
Update documentation for MessageSend application/command's From field for XMPP
When using the channel technology agnostic application/AMI command MessageSend,
the "From" field is technically optional for the SIP channel driver. However,
if being sent by the XMPP resource module (either res_xmpp or res_jabber), the
"From" field is necessary, and must correspond to a defined account. This
patch updates the documentation for this application/AMI command to reflect
this.
In AMI's parser, when it receives a long line (> 1024 characters), it discards
that line, but continues to process the message normally.
Typically, this is not a problem because a) who has lines that long and b)
usually a discarded line results in an invalid message. But if that line is
specifying an optional field, then the message will be processed, you get a
'Response: Success', but things don't work the way you expected them to.
This patch changes the behavior when a line-too-long parse error occurs.
* Changes the log message to avoid way-too-long (and truncated anyways) log
messages
* Adds a 'parsing' status flag to Response: Success
* Sets parsing = MESSAGE_LINE_TOO_LONG if, well, a line is too long
* Responds with an appropriate error if parsing != MESSAGE_OKAY
(closes issue AST-961)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2142/
........
r374581 | dlee | 2012-10-05 15:20:28 -0500 (Fri, 05 Oct 2012) | 1 line
I've committed too much. Reverting part of r374570.
........
Merged revisions 374570,374581 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374586 from http://svn.asterisk.org/svn/asterisk/branches/10
In handle_frm_te() after calling misdn_lib_send_event(bc,
EVENT_RELEASE_COMPLETE) bc is emptied, cleaned and set not in use,
although misdn_lib_send_event() already did the same. This is bad. When
it's not in use we are not allowed to touch it.
* Moved log message in front of the resulting actions and fixed it to
match the case.
Patches:
patch5_bccleanup.diff (license #6372) patch uploaded by Guenther Kelleter
chan_misdn: We must initialize cause on sending a DISCONNECT.
We must initialize cause on sending a DISCONNECT, so it is later correctly
indicated to ast_channel in case the answer (RELEASE/RELEASE_COMPLETE)
does not include one.
Patches:
patch7_hangupcause.diff (license #6372) patch uploaded by Guenther Kelleter
chan_misdn: setup_bc() is called too early for an incoming SETUP on TE.
This prevents the B channel from being setup for HDLC mode when requested
by the bearer capability and config option hdlc=yes. It violates
ETS300102 Ch.5.2.3.2: "The user, in any case, must not connect to the
channel until a CONNECT ACKNOWLEDGE message has been received."
* Call setup_bc() on receipt of CONNECT_ACKNOWLEGDE for PTMP, and on first
response to SETUP for PTP.
Patches:
abe-2881-2.diff (license #6372) patch uploaded by Guenther Kelleter
Modified.
David M. Lee [Thu, 4 Oct 2012 15:42:07 +0000 (15:42 +0000)]
Fix DBDelTree error codes for AMI, CLI and AGI
The AMI DBDelTree command will return Success/Key tree deleted successfully even
if the given key does not exist. The CLI command 'database deltree' had a
similar problem, but was saved because it actually responded with '0 database
entries removed'. AGI had a slightly different error, where it would return
success if the database was unavailable.
This came from confusion about the ast_db_deltree retval, which is -1 in the
event of a database error, or number of entries deleted (including 0 for
deleting nothing).
* Changed some poorly named res variables to num_deleted
* Specified specific errors when calling ast_db_deltree (database unavailable
vs. entry not found vs. success)
* Fixed similar bug in AGI database deltree, where 'Database unavailable'
results in successful result
(closes issue AST-967)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2138/
........
Merged revisions 374426 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374427 from http://svn.asterisk.org/svn/asterisk/branches/10
Alec L Davis [Thu, 4 Oct 2012 04:43:32 +0000 (04:43 +0000)]
dsp.c User configuration of DTMF_NORMAL_TWIST and DTMF_REVERSE_TWIST values
Asterisk's DTMF Specifications are based on AT&T specs, which may not be compatible in other countries.
Various countries have different specifications for the maximum power level differences
between the DTMF low group and high group of frequencies.
Power level difference between frequencies for different Administrations/RPOAs
NTT = Max. 5 dB
AT&T = 4dB(reverse) to 8dB(normal)
Danish = Max. 6 dB
Australian = Max. 10 dB
Brazilian = Max. 9 dB
ETSI = Max. 6 dB from ETSI ES 201 235-3 V1.3.1 (2006-03)
Now allow 4 variables to be individually configured in dsp.conf, with reasonable min/max of 2dB to 20dB.
Default is AT&T specifications
Add's the following variables to dsp.conf
;dtmf_normal_twist=6.31
;dtmf_reverse_twist=2.51
;relax_dtmf_normal_twist=6.31
;relax_dtmf_reverse_twist=3.98
Matthew Jordan [Thu, 4 Oct 2012 02:15:07 +0000 (02:15 +0000)]
Check for presence of buddy in info/dinfo handlers
The res_jabber resource module uses the ASTOBJ library for managing its ref
counted objects. After calling ASTOBJ_CONTAINER_FIND to locate a buddy object,
the pointer to the object has to be checked to see if the buddy existed.
Prior to this patch, the buddy object was not checked for NULL; with this patch
in both aji_client_info_handler and aji_dinfo_handler the pointer is checked
before used and, if no buddy object was found, the handlers return an error
code.
This patch does not take the approach that our JID can be used to log in from
another resource. If that approach is desired, an improvement could be made to
this patch to create the buddy on the fly. This patch seeks only to prevent
Asterisk from crashing.
FYI: In Asterisk 11+, you really should be using res_xmpp. It does not have
this problem, as it moved to the astobj2 library.
Note that multiple people have proposed patches for this issue; the patch being
committed here is based on those.
(closes issue ASTERISK-19532)
Reported by: Karsten Wemheuer
Tested by: Byron Clark
patches:
fix-jabber uploaded by Karsten Wemheuer (license #5930)
xmpp_no_crash_with_ejabberd.patch uploaded by Byron Clark (license #6157)
Matthew Jordan [Wed, 3 Oct 2012 17:27:05 +0000 (17:27 +0000)]
Destroy the generic_monitors container after the core_instances in ccss
For each item in core_instances disposed of in the shutdown of ccss, any
generic monitor instances referenced by the objects will be removed from
generic_monitors during their destruction. Hilarity ensues if
generic_monitors no longer exists.
Thanks to the Asterisk Test Suite's generic_ccss test for complaining loudly
when it ran into this.
........
Merged revisions 374300 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Tue, 2 Oct 2012 21:23:01 +0000 (21:23 +0000)]
Ensure Shutdown AMI event is still fired during Asterisk shutdown
Richard pointed out that having the manager dispose of itself gracefully
during shutdown meant that the Shutdown event will no longer get fired.
This patch moves the AMI event just prior to running the atexit callbacks.
........
Merged revisions 374230 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374231 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Tue, 2 Oct 2012 17:12:16 +0000 (17:12 +0000)]
Fix findings from check-in on r374177
Richard pointed out two problems with the check-in from r374177:
* The ast_msg_shutdown function declaration doesn't match the prototype
in main/message.c.
* The ref/alloc function usage in astobj2 (in trunk) can use the ao2_t_*
variants of the functions to allow the REF_DEBUG flag to enable/disable
their debug counterparts.
........
Merged revisions 374210 from http://svn.asterisk.org/svn/asterisk/branches/10
Matthew Jordan [Tue, 2 Oct 2012 01:27:19 +0000 (01:27 +0000)]
Fix a variety of ref counting issues
This patch resolves a number of ref leaks that occur primarily on Asterisk
shutdown. It adds a variety of shutdown routines to core portions of
Asterisk such that they can reclaim resources allocate duringd initialization.
Sean Bright [Mon, 1 Oct 2012 20:26:09 +0000 (20:26 +0000)]
app_queue: Support persisting and loading of long member lists.
Greenlight in #asterisk brought up that he was receiving an error message "Could
not create persistent member string, out of space" when running app_queue in
Asterisk 10. dump_queue_members() made an assumption that 8K would be enough to
store the generated string, but with queues that have large member lists this is
not always the case. This patch removes the limitation and uses ast_str instead
of a fixed sized buffer.
The complicating factor comes from the fact that ast_db_get requires a buffer
and buffer size argument, which doesn't let us pull back more than what we pass
in, so I introduced a new ast_db_get_allocated() which returns an ast_strdup()'d
copy of the value from astdb.
As an aside, I did some testing on the maximum size of data that we can store in
the BDB library we distribute and was able to store a 10MB string and retrieve
it with no problems, so I feel this is a safe patch.
Matthew Jordan [Sat, 29 Sep 2012 03:54:15 +0000 (03:54 +0000)]
Fix ref leak when adding ICE candidates to an SDP
There was a missing decrement to the reference count for the current ICE
candidate when local candidates are being added to an outbound SDP. This
patch corrects that.
Jonathan Rose [Fri, 28 Sep 2012 19:29:07 +0000 (19:29 +0000)]
res_jabber: Remove CLI command 'jabber test'
The opinion of development was that it is both improper to have Matt's
personal email address used in the source and that the command wouldn't
be useful without it.
Reset hangup flags on channels created through messages and cleanup globals
in res_xmpp on unload.
This patch fixes an issue where hangup flags were not being reset on a
channel, affecting subsequent use of that channel. The patch also adds some
additional cleanup to res_xmpp to fix an issue with reloading the module.
Richard Mudgett [Thu, 27 Sep 2012 22:19:03 +0000 (22:19 +0000)]
Fix SendDTMF crash and channel reference leak using channel name parameter.
The SendDTMF channel name parameter has two issues.
1) Crashes if the channel name does not exist.
2) Leaks a channel reference if the channel is the current channel.
Problem introduced by ASTERISK-15956.
* Updated SendDTMF documentation.
* Renamed app to senddtmf_name and tweaked the type.
........
Merged revisions 373945 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 373946 from http://svn.asterisk.org/svn/asterisk/branches/10
projects / thirdparty / asterisk.git / log
