Daniel Engberg [Fri, 24 Mar 2017 11:17:24 +0000 (12:17 +0100)]
utils/mdadm: Update to 4.0
Update mdadm to 4.0
Remove 000-compile.patch as it's fixed upstream
Refresh patches
Add mdadm.h-Undefine-dprintf-before-redefining.patch
Source: http://git.openembedded.org/openembedded-core/tree/meta/recipes-extended/mdadm/files
Add RAID 0,1 and 10 as depends to make mdadm usable.
rules.mk: make PKG_CONFIG_DEPENDS properly track string values
The confvar macro is adjusted to not only consider if a variable has a
value or not, but also the value itself. Instead of creating a string of
'y' and 'n' characters, all variable names and values are concatenated
and hashed.
Rafał Miłecki [Fri, 8 Dec 2017 12:57:46 +0000 (13:57 +0100)]
opkg: bump to version 2017-12-08
This updates package to the latest commit from the lede-17.01 branch. It
contains few fixes backported from the master:
1) SHA256 fix
2) URL encoding which allows hosting packages on some more picky servers
Changes: 9f61f7a opkg_download: decode file:/ URLs 3c46c88 file_util: implement urldecode_path() 79908c2 file_util: consolidate hex/unhex routines 793fbac opkg: encode archive filenames while constructing download URLs a6bb5cb file_util: implement urlencode_path() helper 098e774 libopkg: fix SHA256 calculation for big endian system
Timo Sigurdsson [Tue, 14 Nov 2017 20:41:30 +0000 (21:41 +0100)]
hostapd: backport fix for wnm_sleep_mode=0
wpa_disable_eapol_key_retries can't prevent attacks against the Wireless
Network Management (WNM) Sleep Mode handshake. Currently, hostapd
processes WNM Sleep Mode requests from clients regardless of the setting
wnm_sleep_mode. Backport Jouni Malinen's upstream patch 114f2830 in
order to ignore such requests by clients when wnm_sleep_mode is disabled
(which is the default).
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
[rewrite commit subject (<= 50 characters), bump PKG_RELEASE] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
(cherry picked from commit bd45e15d0afe64dfed5a02a50a634f7947b50144
fixed PKG_RELEASE and renumbered patch)
Timo Sigurdsson [Tue, 14 Nov 2017 20:41:29 +0000 (21:41 +0100)]
hostapd: Expose the tdls_prohibit option to UCI
wpa_disable_eapol_key_retries can't prevent attacks against the
Tunneled Direct-Link Setup (TDLS) handshake. Jouni Malinen suggested
that the existing hostapd option tdls_prohibit can be used to further
complicate this possibility at the AP side. tdls_prohibit=1 makes
hostapd advertise that use of TDLS is not allowed in the BSS.
Note: If an attacker manages to lure both TDLS peers into a fake
AP, hiding the tdls_prohibit advertisement from them, it might be
possible to bypass this protection.
Make this option configurable via UCI, but disabled by default.
Hans Dedecker [Wed, 6 Dec 2017 13:22:59 +0000 (14:22 +0100)]
dnsmasq: backport infinite dns retries fix
If all configured dns servers return refused in response to a query in
strict mode; dnsmasq will end up in an infinite loop retransmitting the
dns query resulting into high CPU load.
Problem is fixed by checking for the end of a dns server list iteration
in strict mode.
Felix Fietkau [Fri, 17 Nov 2017 07:57:13 +0000 (08:57 +0100)]
mt76: update to the latest version
Significant performance/stability improvements for MT76x2 and MT7603.
Adds LED support.
Changes:
2895775 mt76x2: mcu: remove unused parameter in mt76x2_mcu_msg_alloc signature 1dae8f0 mt7603: mcu: remove unused parameter in mt7603_mcu_msg_alloc() signature 5e49aa9 Fix errors found by cppcheck 1b8c8a0 mt7603: add LED definition registers 4d83561 mt76x2: add LED register definitions 2f40e4a mt76x2: Support using PCI ID as chip ID 27c64bc mt76: add led support using mac80211 led framework dfd64fc mt76x2: init: add ma80211 led callbacks 215edf1 mt7603: init: add ma80211 led callbacks 9d36ff2 mt76x2: Add PCI identifier for MT7602 0b7984e mt7603: remove unnecessary mcu register read function f5498d2 debugfs: add support for changing the LED pin 8e453b3 mac80211: move DT led configuration to the "led" child node 8f1673a mt76x2: limit client WCID entries to 0-127 f9d9c22 mt76x2: clear drop flag for all WCIDs on init 0dd8b68 mt76x2: clear per-WCID tx rate lookup register 3e5afe7 mt76x2: add helper function for setting drop mask 941555b mt76x2: clear drop mask when sending a PS response 7dfb354 mt76: increase rx ring size for mt76x2 73902dc mt76x2: add rx statistics registers fe79816 mt76x2: fix LNA gain register annotation cc588c5 mt76x2: sync channel gain value with latest reference driver 60a4d67 mt76x2: implement dynamic AGC tuning based on false packet detection count 4bc9aa9 mt76x2: add more gain tuning based on the latest reference driver 0a0d16f mt76x2: sync tx power related values with reference driver 8c821aa mac80211: add missing include 82acc85 mt7603: add missing include required on newer kernels 2c1a77c mt76x2: fix transmission of encrypted management frames 0532315 mt76x2: increase OFDM SIFS time 1acde21 mt76x2: add channel argument to eeprom tx power functions 58364a2 mt76x2: initialize channel power limits c2bd89e mt76x2: convert between per-chain tx power and combined output e7eaa7c mt7603: rename mt7603_mac_reset to mt7603_pse_reset ea4c2a1 mt7603: rename MT_PSE_RESET register c86c3a0 mt7603: remove watchdog reset on interface stop 4490f93 mt7603: remove WARN_ON_ONCE for workaround checks 3075059 mt7603: simplify PSE reset 4ed7e07 mt7603: warn if PSE reset fails 7dc8db1 mt7603: clean up dma debug reads 41e6a04 mt7603: make mt7603_mac_watchdog_reset() static dc7a351 mt7603: clear wtbl PS bit for powersave responses 123acf2 mt7603: set tx-skip flag for powersave clients 7dd2a9e mt7603: initialize wtbl ps flag on station add 86ddef3 mt76x2: remove some harmless WARN_ONs in tx status and rx path e326bc2 mt7603: remove some harmless WARN_ONs in rx path
Ryan Mounce [Thu, 3 Aug 2017 11:07:58 +0000 (20:37 +0930)]
tools: patch various gnu tools for macOS 10.13
These host tools compile but may crash at runtime when building on
macOS 10.13 (High Sierra). Backport upstream gnulib patch until new
releases of affected tools.
INAGAKI Hiroshi [Sat, 25 Nov 2017 16:42:50 +0000 (01:42 +0900)]
ramips: add missing reset button for Nexx WT1520
This commit adds missing the GPIO key used as reset button.
Nexx WT1520 has a GPIO key for factory reset, but it's not defined in
WT1520.dtsi and cannot use it.
Drop the UART (full) from the device tree source file, it was never
used for this board. Adjust the kernel bootargs accordingly.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[add note about dropped UART (full) to the commit message] Signed-off-by: Mathias Kresin <dev@kresin.me>
* compat: support timespec64 on old kernels
* compat: support AVX512BW+VL by lying
* compat: fix typo and ranges
* compat: support 4.15's netlink and barrier changes
* poly1305-avx512: requires AVX512F+VL+BW
Numerous compat fixes which should keep us supporting 3.10-4.15-rc1.
ed479fa (tag: 0.0.20171122) version: bump snapshot efd9db0 chacha20poly1305: poly cleans up its own state 5700b61 poly1305-x86_64: unclobber %rbp 314c172 global: switch from timeval to timespec 9e4aa7a poly1305: import MIPS64 primitive from OpenSSL 7a5ce4e chacha20poly1305: import ARM primitives from OpenSSL abad6ee chacha20poly1305: import x86_64 primitives from OpenSSL 6507a03 chacha20poly1305: add more test vectors, some of which are weird 6f136a3 compat: new kernels have netlink fixes e4b3875 compat: stable finally backported fix cc07250 qemu: use unprefixed strip when not cross-compiling 64f1a6d tools: tighten up strtoul parsing c3a04fe device: uninitialize socket first in destruction 82e6e3b socket: only free socket after successful creation of new df318d1 compat: fix compilation with PaX d911cd9 curve25519-neon: compile in thumb mode d355e57 compat: 3.16.50 got proper rt6_get_cookie 666ee61 qemu: update kernel 2420e18 allowedips: do not write out of bounds 185c324 selftest: allowedips: randomized test mutex update 3f6ed7e wg-quick: document localhost exception and v6 rule
Mathias Kresin [Sat, 18 Nov 2017 10:59:22 +0000 (11:59 +0100)]
ramips: fix DCH-M225 support
Setting the pins of the uartf group to gpio+i2s at the time the i2c
driver loads is to late for the WPS gpio button.
The gpio-keys driver fails to load since the pin used by the WPS button
is not yet set to GPIO. The WPS button with the rfkill keycode is
essential for this wifi only board.
Add the missing sound and i2c kernel modules corresponding to the
device nodes.
Antony Black [Thu, 2 Nov 2017 10:53:26 +0000 (13:53 +0300)]
brcm47xx: fix switch port mapping on D-Link DIR-330
D-Link DIR-330 is clone of ASUS WL500GP2, by default conf the WAN port is
eth1, it's not working cus eth1 not soldered and wan port function
performs 5th port of the switch.
brcm47xx: fix switch port mapping on Asus RT-N12 and RT-N16 models
On Asus RT-N12 and RT-N16 models, the WAN and LAN4 ports are swapped in the
initial switch configuration since the presets present in nvram appear to be
wrong.
Add special casing for these models to detect_by_model() in order to ensure
a proper switch configuration.
Marko Ratkaj [Tue, 7 Nov 2017 05:48:09 +0000 (06:48 +0100)]
functions.sh: fix default_postinst function
When we run "opkg install" on a package that installs an uci-defaults
script, functions.sh will fail to evaluate that script in its
default_postinst function.
This happens because there is no "./" present and it searches for the
file in paths specified by the PATH variable. This would work on bash,
but it will not work on ash and some other shells like sh, zsh. This
applys to the ". filename" directive used in this case.
This patch will make the path relative to the /etc/uci-defaults
directory.
Fixes: FS#1021 Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
9fc5daf version: bump snapshot 748ca6b compat: unbreak unloading on kernels 4.6 through 4.9 7be9894 timers: switch to kees' new timer_list functions 6be9a66 wg-quick: save all hooks on save 752e7af version: bump snapshot 2cd9642 wg-quick: fsync the temporary file before renaming b139499 wg-quick: allow for saving existing interface 582c201 contrib: add reresolve-dns 8e04be1 tools: correct type for CTRL_ATTR_FAMILY_ID c138276 wg-quick: allow for the hatchet, but not by default d03f2a0 global: use fewer BUG_ONs 6d681ce timers: guard entire setting in block 4bf32ca curve25519: only enable int128 if compiler support is sound 86e06a3 device: expand scope of destruct lock e3661ab global: get rid of useless forward declarations bedc77a device: only take reference if netns is different 7c07e22 wg-quick: remember to rewind DNS settings on failure 2352ec0 wg-quick: allow specifiying multiple hooks 573cb19 qemu: test using four cores e09ec4d global: style nits 4d3deae qemu: work around ccache bugs 7491cd4 global: infuriating kernel iterator style 78e079c peer: store total number of peers instead of iterating d4e2752 peer: get rid of peer_for_each magic 6cf12d1 compat: be sure to include header before testing 3ea08d8 qemu: allow for cross compilation d467551 crypto/avx: make sure we can actually use ymm registers c786c46 blake2: include headers for macros 328e386 global: accept decent check_patch.pl suggestions a473592 compat: fix up stat calculation for udp tunnel 9d930f5 stats: more robust accounting 311ca62 selftest: initialize mutex in routingtable selftest 8a9a6d3 netns: use time-based test instead of quantity-based e480068 netns: use read built-in instead of ncat hack for dmesg
Florian Beier [Wed, 25 Oct 2017 18:12:24 +0000 (20:12 +0200)]
ar71xx: fix LED config for DIR-869 A1
This fixes the LED configuration for the D-Link DIR-869 A1. In order to
support the device I probed around using an initramfs image for the
UniFi AC. Pulling GPIO 15 to low enabled the LEDs while high disabled them.
GPIO 16 set to low meant that the color was white while pulling it to high
made the color change to orange. The past code was written based upon these
findings.
However, running a flashed image I now discovered that GPIO 15 controls the
orange LEDs while GPIO 16 controls the white ones and that both are active
when low. This means that the GPIOs were inverted and one active_low was set
wrong which this patch fixes.
Behavior of the LED front after this patch is applied:
cat /sys/devices/platform/leds-gpio/leds/d-link:white:status/brightness
0 -> white LEDs are OFF
255 -> white LEDs are ON
cat /sys/devices/platform/leds-gpio/leds/d-link:orange:status/brightness
0 -> orange LEDs are OFF
255 -> orange LEDs are ON
If the brightness of both is set to 255 the LED front will be white.
If the brightness of both is set to 0 the LED front will be off.
ipq806x: nbg6817: sync MAC addresses to the upstream values
The ZyXEL NBG6817 calculates all MAC addresses based on the ethaddr
value stored in the U-Boot environment (0:APPSBLENV). No MAC addresses
are stored in the ART partition and the generated MAC addresses for the
wlan interfaces alternate randomly between 12:34:56:78:90:12 and
00:03:7f:12:34:56.
This patch defines stable MAC addresses for the wlan interfaces for
the first time instead of generating them at random. The previously
defined values for lan/ wan are changed to follow the settings of the
OEM firmware.
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
ipq806x: nbg6817: add kmod-fs-ext4 to device packages
The ZyXEL NBG6817 uses an eMMC flash for the rootfs, which is split
into the readonly squashfs and ext4 for the overlay. This adds the
required package to the device packages to allow mounting the overlay
by default.
/dev/root on /rom type squashfs (ro,relatime)
proc on /proc type proc (rw,nosuid,nodev,noexec,noatime)
sysfs on /sys type sysfs (rw,nosuid,nodev,noexec,noatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev,noatime)
/dev/loop0 on /overlay type ext4 (rw,noatime,data=ordered)
overlayfs:/overlay on / type overlay (rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=512k,mode=755)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,mode=600,ptmxmode=000)
debugfs on /sys/kernel/debug type debugfs (rw,noatime)
mountd(pid1040) on /tmp/run/blockd type autofs (rw,relatime,fd=7,pgrp=1,timeout=30,minproto=5,maxproto=5,indirect)
Before this commit, the ext4 based overlayfs could not be mounted,
which left only the tmpfs based/ volatile emergency overlay in place.
Fixes: https://forum.lede-project.org/t/zyxel-nbg6817-flashing-from-oem/768 Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Remove the ephy-pins from the ethernet device tree node. The ephy-pins
are useed to controll the ePHY LEDs and this board doesn't have these.
Instead one of the ePHY pins is used in GPIO mode to control the WAN
LED.
Use the switch LED trigger to control the WAN LED. Move the power LED
handling to diag.sh to show the boot status via this LED.
Add the missing kernel packages for USB and microSD card reader to the
default package selection.
Fix the maximum image size value. The board has a 32MByte flash chip.
Fixes: FS#1055 Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
[make the commit message more verbose, remove GPIO pinmux for pins not
used as GPIOs] Signed-off-by: Mathias Kresin <dev@kresin.me>
Alex Maclean [Mon, 23 Oct 2017 12:48:19 +0000 (13:48 +0100)]
tools/squashfs4: include sysmacros.h explicitly
glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.
Alex Maclean [Mon, 23 Oct 2017 12:47:55 +0000 (13:47 +0100)]
tools/squashfs: include sysmacros.h explicitly
glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.
Fixes: FS#1018 Signed-off-by: Alex Maclean <monkeh@monkeh.net>
Alex Maclean [Mon, 23 Oct 2017 12:47:33 +0000 (13:47 +0100)]
tools/mtd-utils: include sysmacros.h explicitly
glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.
Alex Maclean [Mon, 23 Oct 2017 12:43:43 +0000 (13:43 +0100)]
tools/findutils: include sysmacros.h explicitly
glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.
Fixes: FS#1016 Signed-off-by: Alex Maclean <monkeh@monkeh.net>
dnsmasq: restore ability to include/exclude raw device names
Commit 5cd88f4 "dnsmasq: remove use of uci state for getting network ifname"
broke the ability to specify unmanaged network device names for inclusion
and exclusion in the uci configuration.
Restore support for raw device names by falling back to the input value
when "network_get_device" yields no result.
Tolga Cakir [Tue, 24 Oct 2017 20:03:33 +0000 (22:03 +0200)]
ipq806x: fix Zyxel NBG6817 WiFi button
Zyxel NBG6817 features a WiFi button, which becomes functional by setting
correct GPIO. It is a switch-type button, so it emits KEY_RFKILL on each ON
and OFF state. This is achieved by setting input-type to EV_SW.
A lede-17.01 branch for bugfix backports has been added to the opkg-lede
repo.
c6caf07 pkg_parse: fix segfault when parsing descriptions with leading newlines 5bb5fd5 opkg: add --no-check-certificate argument 7a96972 libbb: xreadlink: fix memory leak on failure case 3f13edd pkg_run_script: use pkg->dest in half installed case
Refresh patches.
Compile-tested for ar71xx - Archer C7 v2
Runtime-tested on ar71xx - Archer C7 v2
Fixes CVE-2017-15265.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
[remove 2nd CVE as it was fixed in mac80211 in commit bff16304b0bf] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* noise: handshake constants can be read-only after init
* noise: no need to take the RCU lock if we're not dereferencing
* send: improve dead packet control flow
* receive: improve control flow
* socket: eliminate dead code
* device: our use of queues means this check is worthless
* device: no need to take lock for integer comparison
* blake2s: modernize API and have faster _final
* compat: support READ_ONCE
* compat: just make ro_after_init read_mostly
Assorted cleanups to the module, including nice things like marking our
precomputations as const.
* Makefile: even prettier output
* Makefile: do not clean before cloc
* selftest: better test index for rate limiter
* netns: disable accept_dad for all interfaces
Fixes in our testing and build infrastructure. Now works on the 4.14 rc
series.
* qemu: add build-only target
* qemu: work on ubuntu toolchain
* qemu: add more debugging options to main makefile
* qemu: simplify shutdown
* qemu: open /dev/console if we're started early
* qemu: phase out bitbanging
* qemu: always create directory before untarring
* qemu: newer packages
* qemu: put hvc directive into configuration
This is the beginning of working out a cross building test suite, so we do
several tricks to be less platform independent.
* tools: encoding: be more paranoid
* tools: retry resolution except when fatal
* tools: don't insist on having a private key
* tools: add pass example to wg-quick man page
* tools: style
* tools: newline after warning
* tools: account for padding being in zero attribute
Several important tools fixes, one of which suppresses a needless warning.
Stijn Tintel [Tue, 17 Oct 2017 13:35:03 +0000 (16:35 +0300)]
hostapd: add wpa_disable_eapol_key_retries option
Commit b6c3931ad6554357a108127797c8d7097a93f18f introduced an AP-side
workaround for key reinstallation attacks. This option can be used to
mitigate KRACK on the station side, in case those stations cannot be
updated. Since many devices are out there will not receive an update
anytime soon (if at all), it makes sense to include this workaround.
Unfortunately this can cause interoperability issues and reduced
robustness of key negotiation, so disable the workaround by default, and
add an option to allow the user to enable it if he deems necessary.
Stijn Tintel [Tue, 17 Oct 2017 14:54:59 +0000 (17:54 +0300)]
hostapd: backport extra changes related to KRACK
While these changes are not included in the advisory, upstream
encourages users to merge them.
See http://lists.infradead.org/pipermail/hostap/2017-October/037989.html
Added 013-Add-hostapd-options-wpa_group_update_count-and-wpa_p.patch so
that 016-Optional-AP-side-workaround-for-key-reinstallation-a.patch
applies without having to rework it.
The subtarget cleanups made in cabf775 "x86: Refresh subtargets kernel config"
removed some important symbol disable statements, so revert the changes to the
subtarget configs for now.
Move wireguard from openwrt/packages to base a package.
This follows the pattern of kmod-cake and openvpn. Cake is a fast-moving
experimental kernel module that many find essential and useful. The
other is a VPN client. Both are inside of core. When you combine the two
characteristics, you get WireGuard. Generally speaking, because of the
extremely lightweight nature and "stateless" configuration of WireGuard,
many view it as a core and essential utility, initiated at boot time
and immediately configured by netifd, much like the use of things like
GRE tunnels.
WireGuard has a backwards and forwards compatible Netlink API, which
means the userspace tools should work with both newer and older kernels
as things change. There should be no versioning requirements, therefore,
between kernel bumps and userspace package bumps.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Jo-Philipp Wich <jo@mein.io> Acked-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 699c6fcc314225f79156a26db418e15bbc6bf10f)
This was done by simply running `make kernel_menuconfig CONFIG_TARGET=subtarget`
and then saving without changing any option.
Having consistent kernel config is important to avoid surprises, such
as the issue fixed with 6f0367c9 (where Xen support was silently
disabled when building the kernel, although it was present in the
initial config)
As far as I understand the build system, this shouldn't have any
user-visible impact, because the build system already merges the
various kernel configs during build.
x86: Fix xen serial console by removing conflicting PATA driver
The Xen serial console has been broken since the xen_domu subtarget
was merged in the generic x86 subtarget (commits 296772f9 and b36e24f3).
The reason for the broken serial console seems to be an IRQ conflict
between the serial console driver and the PATA_LEGACY driver:
[ 1.330125] genirq: Flags mismatch irq 8. 00000000 (hvc_console) vs. 00000000 (platform[pata_legacy.4])
[ 1.330134] hvc_open: request_irq failed with rc -16.
[ 1.330148] Warning: unable to open an initial console.
Just drop the PATA_LEGACY driver from the x86/generic and x86_64
subtargets, since this driver is marked experimental and only supports
very old ISA devices anyway. It is still included in the x86/legacy
subtarget where it rightfully belongs.
Thibaut VARENE [Wed, 2 Aug 2017 14:28:16 +0000 (16:28 +0200)]
ramips: mt7620: do not pad sysupgrade Archer images
The current makefile unnecessarily pads sysupgrade image for Archer devices.
This has three implications:
1. higher risk of OOM when uploading the binary image to the device
2. much slower upgrade due to time wasted erasing and writing padding
3. grows image beyond available flash size if metadata are appended
This is already fixed in master, albeit in a completely different way (the
whole target have been reworked)
Adrian Panella [Tue, 12 Sep 2017 18:29:09 +0000 (13:29 -0500)]
uhttp: update to latest version
3fd58e9 2017-08-19 uhttpd: add manifest support 88c0b4b 2017-07-09 file: fix basic auth regression 99957f6 2017-07-02 file: remove unused "auth" member from struct
path_info c0a569d 2017-07-02 proc: expose HTTP_AUTH_USER and HTTP_AUTH_PASS ad93be7 2017-07-02 auth: store parsed username and password fa51d7f 2017-07-02 proc: do not declare empty process variables a8bf9c0 2017-01-26 uhttpd: Add TCP_FASTOPEN support e6cfc91 2016-10-25 lua: ensure that PATH_INFO starts with a slash
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
The /bin/config_generate script and some other scripts are assuming the
/etc/config directory exists in the image. This is true in case for
example the package firewall, dropbear or dnsmasq are included, which
are adding the files under /etc/config/. Without any of these package
the system will not boot up fully because the /etc/config/ directory is
missing and some init scripts just fail.
Make sure all images with the base-files contain a /etc/config/
directory.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: John Crispin <john@phrozen.org>
Module definitions for kmod-wdt-sunxi and kmod-eeprom-sunxi are removed
(wdt-sunxi was builtin anyways; nvmem-sunxi, which is the new name of
eeprom-sunxi is changed to builtin). As kmod-eeprom-sunxi was specified
in DEFAULT_PACKAGES, but not available on kernel 4.4, it was breaking the
image builder.
Support for kmod-sunxi-ir is added for kernel 4.4 (it is unclear why it
was disable before, it builds fine with with kernel 4.4).
Condtionals only relevant for pre-4.4 kernels are removed from modules.mk,
as sunxi does't support older kernels anymore.
If the optimized firmware download is disabled, the xdsl subsystem
hangs in the "idle request" state after physically disconnecting and
reconnecting the xdsl modem from the line.
It might fix the failing line init on boot as well.
Fixed an authentication bypass issue in SSL/TLS. When the TLS
authentication mode was set to 'optional',
mbedtls_ssl_get_verify_result() would incorrectly return 0 when the
peer's X.509 certificate chain had more than
MBEDTLS_X509_MAX_INTERMEDIATE_CA intermediates (default: 8), even when
it was not trusted. This could be triggered remotely on both the client
and server side. (Note, with the authentication mode set by
mbedtls_ssl_conf_authmode()to be 'required' (the default), the handshake
was correctly aborted).
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> Tested-by: Magnus Kroken <mkroken@gmail.com>
Our local patch is no longer needed, all this patch was doing was utilizing
gen10g_soft_reset which does nothing either, so just keep the code unchanged.
With ltq-vdsl-mei 1.5.17.6 an optimized firmware download was added and
enabled by default. As soon as the optimized firmware download is
enabled, a watchdog based reboot is trigger between 24h to 48h of
uptime if the board isn't connected to a xdsl line.
Martin Schiller [Tue, 26 Sep 2017 05:56:55 +0000 (07:56 +0200)]
ltq-vdsl: fix PM thread suspend and resume handling
This is a backport form drv_dsl_cpe_api-4.18.10 and fixes some PM
thread handling issues which lead to high system load and watchdog
trigger within 1h of uptime for boards not connected to a xdsl line.
When bumping tcpdump from 4.9.1 to 4.9.2, I did not include the fixed
CVEs in the commit message. As the list of fixed CVEs is quite long,
we should probably mention them in the changelogs of the releases to
come. This commit will make sure this happens.
projects / thirdparty / openwrt.git / log
