System wide suspend already has support for lmem save/restore during
suspend therefore enabling d3cold for s2idle and keepng it disable for
runtime PM.(Refer below commit for d3cold runtime PM disable justification)
'commit 66eb93e71a7a ("drm/i915/dgfx: Keep PCI autosuspend control
'on' by default on all dGPU")'
It will reduce the DG2 Card power consumption to ~0 Watt
for s2idle power KPI.
Encountered on an ARM Mali-T760 MP4, attempting to read the nvmem
variable can also return EOPNOTSUPP instead of ENOENT when speed
binning is unsupported.
Cc: <stable@vger.kernel.org> Fixes: 7d690f936e9b ("drm/panfrost: Add basic support for speed binning") Signed-off-by: David Michael <fedora.dm0@gmail.com> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/87msyryd7y.fsf@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper to reschedule drm_mode_config::output_poll_work after
polling has been enabled for a connector (and needing a reschedule,
since previously polling was disabled for all connectors and hence
output_poll_work was not running).
This is needed by the next patch fixing HPD polling on i915.
vmw_bo_unreference sets the input buffer to null on exit, resulting in
null ptr deref's on the subsequent drm gem put calls.
This went unnoticed because only very old userspace would be exercising
those paths but it wouldn't be hard to hit on old distros with brand
new kernels.
Introduce a new function that abstracts unrefing of user bo's to make
the code cleaner and more explicit.
Signed-off-by: Zack Rusin <zackr@vmware.com> Reported-by: Ian Forbes <iforbes@vmware.com> Fixes: 9ef8d83e8e25 ("drm/vmwgfx: Do not drop the reference to the handle too soon") Cc: <stable@vger.kernel.org> # v6.4+ Reviewed-by: Maaz Mombasawala<mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230818041301.407636-1-zack@kde.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For multiple commands the driver was not correctly validating the shader
stages resulting in possible kernel oopses. The validation code was only.
if ever, checking the upper bound on the shader stages but never a lower
bound (valid shader stages start at 1 not 0).
In contrast to most other GUP code, GUP-fast common page table walking
code like gup_pte_range() also handles hugetlb pages. But in contrast to
other hugetlb page table walking code, it does not look at the hugetlb PTE
abstraction whereby we have only a single logical hugetlb PTE per hugetlb
page, even when using multiple cont-PTEs underneath -- which is for
example what huge_ptep_get() abstracts.
So when we have a hugetlb page that is mapped via cont-PTEs, GUP-fast
might stumble over a PTE that does not map the head page of a hugetlb page
-- not the first "head" PTE of such a cont mapping.
Logically, the whole hugetlb page is mapped (entire_mapcount == 1), but we
might end up calling gup_must_unshare() with a tail page of a hugetlb
page.
We only maintain a single PageAnonExclusive flag per hugetlb page (as
hugetlb pages cannot get partially COW-shared), stored for the head page.
That flag is clear for all tail pages.
So when gup_must_unshare() ends up calling PageAnonExclusive() with a tail
page of a hugetlb page:
Always detects "not exclusive" for passed tail pages and refuses to PIN
the tail pages R/O, as gup_must_unshare() == true. GUP-fast will fallback
to ordinary GUP. As ordinary GUP properly considers the logical hugetlb
PTE abstraction in hugetlb_follow_page_mask(), pinning the page will
succeed when looking at the PageAnonExclusive on the head page only.
So the only real effect of this is that with cont-PTE hugetlb pages, we'll
always fallback from GUP-fast to ordinary GUP when not working on the head
page, which ends up checking the head page and do the right thing.
Consequently, the cow selftests pass with cont-PTE hugetlb pages as well
without CONFIG_DEBUG_VM_PGFLAGS.
Note that this only applies to anon hugetlb pages that are mapped using
cont-PTEs: for example 64k hugetlb pages on a 4k arm64 kernel.
... and only when R/O-pinning (FOLL_PIN) such pages that are mapped into
the page table R/O using GUP-fast.
On production kernels (and even most debug kernels, that don't set
CONFIG_DEBUG_VM_PGFLAGS) this patch should theoretically not be required
to be backported. But of course, it does not hurt.
Link: https://lkml.kernel.org/r/20230805101256.87306-1-david@redhat.com Fixes: a7f226604170 ("mm/gup: trigger FAULT_FLAG_UNSHARE when R/O-pinning a possibly shared anonymous page") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Ryan Roberts <ryan.roberts@arm.com> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Tested-by: Ryan Roberts <ryan.roberts@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unfortunately commit 474098edac26 ("mm/gup: replace FOLL_NUMA by
gup_can_follow_protnone()") missed that follow_page() and
follow_trans_huge_pmd() never implicitly set FOLL_NUMA because they really
don't want to fail on PROT_NONE-mapped pages -- either due to NUMA hinting
or due to inaccessible (PROT_NONE) VMAs.
As spelled out in commit 0b9d705297b2 ("mm: numa: Support NUMA hinting
page faults from gup/gup_fast"): "Other follow_page callers like KSM
should not use FOLL_NUMA, or they would fail to get the pages if they use
follow_page instead of get_user_pages."
liubo reported [1] that smaps_rollup results are imprecise, because they
miss accounting of pages that are mapped PROT_NONE. Further, it's easy to
reproduce that KSM no longer works on inaccessible VMAs on x86-64, because
pte_protnone()/pmd_protnone() also indictaes "true" in inaccessible VMAs,
and follow_page() refuses to return such pages right now.
As KVM really depends on these NUMA hinting faults, removing the
pte_protnone()/pmd_protnone() handling in GUP code completely is not
really an option.
To fix the issues at hand, let's revive FOLL_NUMA as FOLL_HONOR_NUMA_FAULT
to restore the original behavior for now and add better comments.
Set FOLL_HONOR_NUMA_FAULT independent of FOLL_FORCE in
is_valid_gup_args(), to add that flag for all external GUP users.
Note that there are three GUP-internal __get_user_pages() users that don't
end up calling is_valid_gup_args() and consequently won't get
FOLL_HONOR_NUMA_FAULT set.
1) get_dump_page(): we really don't want to handle NUMA hinting
faults. It specifies FOLL_FORCE and wouldn't have honored NUMA
hinting faults already.
2) populate_vma_page_range(): we really don't want to handle NUMA hinting
faults. It specifies FOLL_FORCE on accessible VMAs, so it wouldn't have
honored NUMA hinting faults already.
3) faultin_vma_page_range(): we similarly don't want to handle NUMA
hinting faults.
To make the combination of FOLL_FORCE and FOLL_HONOR_NUMA_FAULT work in
inaccessible VMAs properly, we have to perform VMA accessibility checks in
gup_can_follow_protnone().
As GUP-fast should reject such pages either way in
pte_access_permitted()/pmd_access_permitted() -- for example on x86-64 and
arm64 that both implement pte_protnone() -- let's just always fallback to
ordinary GUP when stumbling over pte_protnone()/pmd_protnone().
As Linus notes [2], honoring NUMA faults might only make sense for
selected GUP users.
So we should really see if we can instead let relevant GUP callers specify
it manually, and not trigger NUMA hinting faults from GUP as default.
Prepare for that by making FOLL_HONOR_NUMA_FAULT an external GUP flag and
adding appropriate documenation.
While at it, remove a stale comment from follow_trans_huge_pmd(): That
comment for pmd_protnone() was added in commit 2b4847e73004 ("mm: numa:
serialise parallel get_user_page against THP migration"), which noted:
THP does not unmap pages due to a lack of support for migration
entries at a PMD level. This allows races with get_user_pages
Nowadays, we do have PMD migration entries, so the comment no longer
applies. Let's drop it.
walk_page_range() and friends often operate under write-locked mmap_lock.
With introduction of vma locks, the vmas have to be locked as well during
such walks to prevent concurrent page faults in these areas. Add an
additional member to mm_walk_ops to indicate locking requirements for the
walk.
The change ensures that page walks which prevent concurrent page faults
by write-locking mmap_lock, operate correctly after introduction of
per-vma locks. With per-vma locks page faults can be handled under vma
lock without taking mmap_lock at all, so write locking mmap_lock would
not stop them. The change ensures vmas are properly locked during such
walks.
A sample issue this solves is do_mbind() performing queue_pages_range()
to queue pages for migration. Without this change a concurrent page
can be faulted into the area and be left out of migration.
Link: https://lkml.kernel.org/r/20230804152724.3090321-2-surenb@google.com Signed-off-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Suggested-by: Jann Horn <jannh@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Michel Lespinasse <michel@lespinasse.org> Cc: Peter Xu <peterx@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 2c2241081f7d ("mm/gup: move private gup FOLL_ flags to
internal.h") FOLL_LONGTERM flag value got updated from 0x10000 to 0x100 at
include/linux/mm_types.h.
As hmm.hmm_device_private.hmm_gup_test uses FOLL_LONGTERM Updating same
here as well.
Before this change test goes in an infinite assert loop in
hmm.hmm_device_private.hmm_gup_test
==========================================================
RUN hmm.hmm_device_private.hmm_gup_test ...
hmm-tests.c:1962:hmm_gup_test:Expected HMM_DMIRROR_PROT_WRITE..
..(2) == m[2] (34)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
...
==========================================================
Like a few other drivers, YMFPCI driver needs to clean up with
snd_card_free() call at an error path of the probe; otherwise the
other devres resources are released before the card and it results in
the UAF.
This patch uses the helper for handling the probe error gracefully.
smaps_pte_hole_lookup() is calling shmem_partial_swap_usage() with page
table lock held: but shmem_partial_swap_usage() does cond_resched_rcu() if
need_resched(): "BUG: sleeping function called from invalid context".
Since shmem_partial_swap_usage() is designed to count across a range, but
smaps_pte_hole_lookup() only calls it for a single page slot, just break
out of the loop on the last or only page, before checking need_resched().
Link: https://lkml.kernel.org/r/6fe3b3ec-abdf-332f-5c23-6a3b3a3b11a9@google.com Fixes: 230100321518 ("mm/smaps: simplify shmem handling of pte holes") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: <stable@vger.kernel.org> [5.16+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code calling ima_free_kexec_buffer runs long after the memblock
allocator has already been torn down, potentially resulting in a use
after free in memblock_isolate_range.
With KASAN or KFENCE, this use after free will result in a BUG
from the idle task, and a subsequent kernel panic.
Switch ima_free_kexec_buffer over to memblock_free_late to avoid
that issue.
Fixes: fee3ff99bc67 ("powerpc: Move arch independent ima kexec functions to drivers/of/kexec.c") Cc: stable@kernel.org Signed-off-by: Rik van Riel <riel@surriel.com> Suggested-by: Mike Rappoport <rppt@kernel.org> Link: https://lore.kernel.org/r/20230817135759.0888e5ef@imladris.surriel.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Problem can be reproduced by unloading snd_soc_simple_card, because in
devm_get_clk_from_child() devres data is allocated as `struct clk`, but
devm_clk_release() expects devres data to be `struct devm_clk_state`.
KASAN report:
==================================================================
BUG: KASAN: slab-out-of-bounds in devm_clk_release+0x20/0x54
Read of size 8 at addr ffffff800ee09688 by task (udev-worker)/287
The buggy address belongs to the object at ffffff800ee09600
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 136 bytes inside of
256-byte region [ffffff800ee09600, ffffff800ee09700)
Memory state around the buggy address: ffffff800ee09580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff800ee09600: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffff800ee09680: 00 fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^ ffffff800ee09700: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffffff800ee09780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Commmit f5ea16137a3f ("NFSv4: Retry LOCK on OLD_STATEID during delegation
return") attempted to solve this problem by using nfs4's generic async error
handling, but introduced a regression where v4.0 lock recovery would hang.
The additional complexity introduced by overloading that error handling is
not necessary for this case. This patch expects that commit to be
reverted.
The problem as originally explained in the above commit is:
There's a small window where a LOCK sent during a delegation return can
race with another OPEN on client, but the open stateid has not yet been
updated. In this case, the client doesn't handle the OLD_STATEID error
from the server and will lose this lock, emitting:
"NFS: nfs4_handle_delegation_recall_error: unhandled error -10024".
Fix this by using the old_stateid refresh helpers if the server replies
with OLD_STATEID.
The Lenovo Thinkbook 14s Yoga ITL has 4 new symbols/shortcuts on their
F9-F11 and PrtSc keys:
F9: Has a symbol of a head with a headset, the manual says "Service key"
F10: Has a symbol of a telephone horn which has been picked up from the
receiver, the manual says: "Answer incoming calls"
F11: Has a symbol of a telephone horn which is resting on the receiver,
the manual says: "Reject incoming calls"
PrtSc: Has a symbol of a siccor and a dashed ellipse, the manual says:
"Open the Windows 'Snipping' Tool app"
This commit adds support for these 4 new hkey events.
This adds my laptop Lenovo Yoga 7 14ACN6, with Product Name: 82N7
(from `dmidecode -t1 | grep "Product Name"`) to
the ec_trigger_quirk_dmi_table, have tested that this is required
for the YMC driver to work correctly on this model.
Signed-off-by: Swapnil Devesh <me@sidevesh.com> Reviewed-by: Gergő Köteles <soyer@irl.hu> Link: https://lore.kernel.org/r/18a08a8b173.895ef3b250414.1213194126082324071@sidevesh.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 06470f7468c8 ("mac80211: add API to allow filtering frames in BA sessions")
added reorder_buf_filtered to mark frames filtered by firmware, and it
can only work correctly if hw.max_rx_aggregation_subframes <= 64 since
it stores the bitmap in a u64 variable.
However, new HE or EHT devices can support BlockAck number up to 256 or
1024, and then using a higher subframe index leads UBSAN warning:
UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39
shift exponent 215 is too large for 64-bit type 'long long unsigned int'
Call Trace:
<IRQ>
dump_stack_lvl+0x48/0x70
dump_stack+0x10/0x20
__ubsan_handle_shift_out_of_bounds+0x1ac/0x360
ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211]
ieee80211_sta_reorder_release+0x9c/0x400 [mac80211]
ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211]
ieee80211_rx_list+0xaef/0xf60 [mac80211]
ieee80211_rx_napi+0x53/0xd0 [mac80211]
Since only old hardware that supports <=64 BlockAck uses
ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a
WARN_ONCE() and comment to note to avoid using this function if hardware
capability is not suitable.
When building for power4, newer binutils don't recognise the "dcbfl"
extended mnemonic.
dcbfl RA, RB is equivalent to dcbf RA, RB, 1.
Switch to "dcbf" to avoid the build error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove 10us delay in cdns_spi_process_fifo() (called from cdns_spi_irq())
to fix data corruption issue on Master side when this driver
configured in Slave mode, as Slave is failed to prepare the date
on time due to above delay.
Add 10us delay before processing the RX FIFO as TX empty doesn't
guarantee valid data in RX FIFO.
Signed-off-by: Srinivas Goud <srinivas.goud@amd.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1692610216-217644-1-git-send-email-srinivas.goud@amd.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current analog gain TLV seems to have completely incorrect values in
it. The gain starts at 0.5dB, proceeds in 1dB steps, and has no mute
value, correct the control to match.
The commit 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode
bonds") aims to enable the use of macvlans on top of rlb bond mode. However,
the current rlb bond mode only handles ARP packets to update remote neighbor
entries. This causes an issue when a macvlan is on top of the bond, and
remote devices send packets to the macvlan using the bond's MAC address
as the destination. After delivering the packets to the macvlan, the macvlan
will rejects them as the MAC address is incorrect. Consequently, this commit
makes macvlan over bond non-functional.
To address this problem, one potential solution is to check for the presence
of a macvlan port on the bond device using netif_is_macvlan_port(bond->dev)
and return NULL in the rlb_arp_xmit() function. However, this approach
doesn't fully resolve the situation when a VLAN exists between the bond and
macvlan.
So let's just do a partial revert for commit 14af9963ba1e in rlb_arp_xmit().
As the comment said, Don't modify or load balance ARPs that do not originate
locally.
Fixes: 14af9963ba1e ("bonding: Support macvlans on top of tlb/rlb mode bonds") Reported-by: susan.zheng@veritas.com Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2117816 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Negative ifindexes are illegal, but the kernel does not validate the
ifindex in the ancillary header of RTM_NEWLINK messages, resulting in
the kernel generating a warning [1] when such an ifindex is specified.
Don't queue more gc work, else we may queue the same elements multiple
times.
If an element is flagged as dead, this can mean that either the previous
gc request was invalidated/discarded by a transaction or that the previous
request is still pending in the system work queue.
The latter will happen if the gc interval is set to a very low value,
e.g. 1ms, and system work queue is backlogged.
The sets refcount is 1 if no previous gc requeusts are queued, so add
a helper for this and skip gc run if old requests are pending.
Add a helper for this and skip the gc run in this case.
Fixes: f6c383b8c31a ("netfilter: nf_tables: adapt set backend to use GC transaction API") Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Destroy work waits for the RCU grace period then it releases the objects
with no mutex held. All releases objects follow this path for
transactions, therefore, order is guaranteed and references to top-level
objects in the hierarchy remain valid.
However, netlink notifier might interfer with pending destroy work.
rcu_barrier() is not correct because objects are not release via RCU
callback. Flush destroy work before releasing objects from netlink
notifier path.
We have to validate all tables in the transaction that are in
VALIDATE_DO state, the blamed commit below did not move the break
statement to its right location so we only validate one table.
Moreover, we can't init table->validate to _SKIP when a table object
is allocated.
If we do, then if a transcaction creates a new table and then
fails the transaction, nfnetlink will loop and nft will hang until
user cancels the command.
Add back the pernet state as a place to stash the last state encountered.
This is either _DO (we hit an error during commit validation) or _SKIP
(transaction passed all checks).
Fixes: 00c320f9b755 ("netfilter: nf_tables: make validation state per table") Reported-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Add check for pf->vf not being NULL before dereferencing
pf->vf[vsi->vf_id] in updating VSI filter sync.
Add a similar check before dereferencing !pf->vf[vsi->vf_id].trusted
in the condition for clearing promisc mode bit.
Fixes: c87c938f62d8 ("i40e: Add VF VLAN pruning") Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
When replacing an existing root qdisc, with one that is of the same kind, the
request boils down to essentially a parameterization change i.e not one that
requires allocation and grafting of a new qdisc. syzbot was able to create a
scenario which resulted in a taprio qdisc replacing an existing taprio qdisc
with a combination of NLM_F_CREATE, NLM_F_REPLACE and NLM_F_EXCL leading to
create and graft scenario.
The fix ensures that only when the qdisc kinds are different that we should
allow a create and graft, otherwise it goes into the "change" codepath.
While at it, fix the code and comments to improve readability.
While syzbot was able to create the issue, it did not zone on the root cause.
Analysis from Vladimir Oltean <vladimir.oltean@nxp.com> helped narrow it down.
v1->V2 changes:
- remove "inline" function definition (Vladmir)
- remove extrenous braces in branches (Vladmir)
- change inline function names (Pedro)
- Run tdc tests (Victor)
v2->v3 changes:
- dont break else/if (Simon)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+a3618a167af2021433cd@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/20230816225759.g25x76kmgzya2gei@skbuf/T/ Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The IGC_PTM_CTRL_SHRT_CYC defines the time between two consecutive PTM
requests. The bit resolution of this field is six bits. That bit five was
missing in the mask. This patch comes to correct the typo in the
IGC_PTM_CTRL_SHRT_CYC macro.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20230821171721.2203572-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The original implementation had a very simple handling for single frame
transmissions as it just sent the single frame without a timeout handling.
With the new echo frame handling the echo frame was also introduced for
single frames but the former exception ('simple without timers') has been
maintained by accident. This leads to a 1 second timeout when closing the
socket and to an -ECOMM error when CAN_ISOTP_WAIT_TX_DONE is selected.
As the echo handling is always active (also for single frames) remove the
wrong extra condition for single frames.
Fixes: 9f39d36530e5 ("can: isotp: add support for transmission without flow control") Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20230821144547.6658-2-socketcan@hartkopp.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a hardware reset is triggered on devices not initializing WED the
calls to mtk_wed_fe_reset and mtk_wed_fe_reset_complete dereference a
pointer on uninitialized stack memory.
Break out of both functions in case a hw_list entry is 0.
Fixes: 08a764a7c51b ("net: ethernet: mtk_wed: add reset/reset_complete callbacks") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/5465c1609b464cc7407ae1530c40821dcdf9d3e6.1692634266.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The tg3 driver will use kmalloc() under some conditions. Check the
frag_size and use slab_build_skb() when frag_size is 0. Silences
the warning introduced by commit ce098da1497c ("skbuff: Introduce
slab_build_skb()"):
Use slab_build_skb() instead
...
tg3_poll_work+0x638/0xf90 [tg3]
Before adding a port to bond, it need to be set down first. In the
lacpdu test the author set the port down specifically. But commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up")
changed the operation order, the kernel will set the port down _after_
adding to bond. So all the ports will be down at last and the test failed.
In fact, the veth interfaces are already inactive when added. This
means there's no need to set them down again before adding to the bond.
Let's just remove the link down operation.
Fixes: a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up") Reported-by: Zhengchao Shao <shaozhengchao@huawei.com> Closes: https://lore.kernel.org/netdev/a0ef07c7-91b0-94bd-240d-944a330fcabd@huawei.com/ Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230817082459.1685972-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
During stress test with attaching and detaching VF from KVM and
simultaneously changing VFs spoofcheck and trust there was a
NULL pointer dereference in ice_reset_vf that VF's VSI is null.
More than one instance of ice_reset_vf() can be running at a given
time. When we rebuild the VSI in ice_reset_vf, another reset can be
triaged from ice_service_task. In this case we can access the currently
uninitialized VSI and cause panic. The window for this racing condition
has been around for a long time but it's much worse after commit 227bf4500aaa ("ice: move VSI delete outside deconfig") because
the reset runs faster. ice_reset_vf() using vf->cfg_lock and when
we move this lock before accessing to the VF VSI, we can fix
BUG for all cases.
Panic occurs sometimes in ice_vsi_is_rx_queue_active() and sometimes
in ice_vsi_stop_all_rx_rings()
With our reproducer, we can hit BUG:
~8h before commit 227bf4500aaa ("ice: move VSI delete outside deconfig").
~20m after commit 227bf4500aaa ("ice: move VSI delete outside deconfig").
After this fix we are not able to reproduce it after ~48h
There was commit cf90b74341ee ("ice: Fix call trace with null VSI during
VF reset") which also tried to fix this issue, but it was only
partially resolved and the bug still exists.
After this commit we are not able to attach VF to VM:
virsh attach-interface v0 hostdev --managed 0000:41:01.0 --mac 52:52:52:52:52:52
error: Failed to attach interface
error: Cannot set interface MAC to 52:52:52:52:52:52 for ifname enp65s0f0np0 vf 0: Resource temporarily unavailable
ice_check_vf_ready_for_cfg() already contain waiting for reset.
New condition in ice_check_vf_ready_for_reset() causing only problems.
Fixes: 7255355a0636 ("ice: Fix ice VF reset during iavf initialization") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The driver is misconfiguring the hardware for some values of MTU such that
it could use multiple descriptors to receive a packet when it could have
simply used one.
Change the driver to use a round-up instead of the result of a shift, as
the shift can truncate the lower bits of the size, and result in the
problem noted above. It also aligns this driver with similar code in i40e.
The insidiousness of this problem is that everything works with the wrong
size, it's just not working as well as it could, as some MTU sizes end up
using two or more descriptors, and there is no way to tell that is
happening without looking at ice_trace or a bus analyzer.
Fixes: efc2214b6047 ("ice: Add support for XDP") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
==================================================================
Fixes: 23f57406b82d ("ipv4: avoid using shared IP generator for connected sockets") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.
Using iproute2 with user-space-level checking removed:
Before:
# ./ip link add index 10 type veth peer index -1
# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
-1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff
Now:
$ ./ip link add index 10 type veth peer index -1
Error: ifindex can't be negative.
This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.
Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex") Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: b0ba512e25d7 ("net: bcmgenet: enable driver to work without a device tree") Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The fixed_phy_register() function returns error pointers and never
returns NULL. Update the checks accordingly.
Fixes: c25b23b8a387 ("bgmac: register fixed PHY for ARM BCM470X / BCM5301X chipsets") Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Based on the original code semantic in case of Clause 45 MDIO, the address
command is supposed to be followed by the command sending the MMD address,
not the CSR address. The commit 002dd3de097c ("net: mdio: mdio-bitbang:
Separate C22 and C45 transactions") has erroneously broken that. So most
likely due to an unfortunate variable name it switched the code to sending
the CSR address. In our case it caused the protocol malfunction so the
read operation always failed with the turnaround bit always been driven to
one by PHY instead of zero. Fix that by getting back the correct
behaviour: sending MMD address command right after the regular address
command.
Fixes: 002dd3de097c ("net: mdio: mdio-bitbang: Separate C22 and C45 transactions") Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
802.1X PAE frames are link-local frames, therefore they must be trapped to
the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as
regular multicast frames, therefore flooding them to user ports. To fix
this, set 802.1X PAE frames to be trapped to the CPU port(s).
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Remove assumptions about shared buffer cell size and instead query the
cell size from devlink. Adjust the test to send small packets that fit
inside a single cell.
Tested on Spectrum-{1,2,3,4}.
Fixes: 4735402173e6 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/f7dfbf3c4d1cb23838d9eb99bab09afaa320c4ca.1692268427.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The field 'virtual router' was extended to 12 bits in Spectrum-4.
Therefore, the element 'MLXSW_AFK_ELEMENT_VIRT_ROUTER_MSB' needs 3 bits for
Spectrum < 4 and 4 bits for Spectrum >= 4.
The elements are stored in an internal storage scratchpad. Currently, the
MSB is defined there as 3 bits. It means that for Spectrum-4, only 2K VRFs
can be used for multicast routing, as the highest bit is not really used by
the driver. Fix the definition of 'VIRT_ROUTER_MSB' to use 4 bits. Adjust
the definitions of 'virtual router' field in the blocks accordingly - use
'_avoid_size_check' for Spectrum-2 instead of for Spectrum-4. Fix the mask
in parse function to use 4 bits.
Fixes: 6d5d8ebb881c ("mlxsw: Rename virtual router flex key element") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/79bed2b70f6b9ed58d4df02e9798a23da648015b.1692268427.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The two most significant bits of the "local_port" field in the SSPR
register are always cleared since they are overwritten by the deprecated
and overlapping "sub_port" field.
On systems with more than 255 local ports (e.g., Spectrum-4), this
results in the firmware maintaining invalid mappings between system port
and local port. Specifically, two different systems ports (0x1 and
0x101) point to the same local port (0x1), which eventually leads to
firmware errors.
Fix by removing the deprecated "sub_port" field.
Fixes: fd24b29a1b74 ("mlxsw: reg: Align existing registers to use extended local_port field") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/9b909a3033c8d3d6f67f237306bef4411c5e6ae4.1692268427.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently, in Spectrum-2 and above, time stamps are extracted from the CQE
into the time stamp fields in 'struct mlxsw_skb_cb', only when the CQE
time stamp type is UTC. The time stamps are read directly from the CQE and
software can get the time stamp in UTC format using CQEv2.
From Spectrum-4, the time stamps that are read from the CQE are allowed
to be also from MIRROR_UTC type.
Therefore, we get a warning [1] from the driver that the time stamp fields
were not set, when LLDP control packet is sent.
Allow the time stamp type to be MIRROR_UTC and set the time stamp in this
case as well.
There are two network devices(veth1 and veth3) in ns1, and ipvlan1 with
L3S mode and ipvlan2 with L2 mode are created based on them as
figure (1). In this case, ipvlan_register_nf_hook() will be called to
register nf hook which is needed by ipvlans in L3S mode in ns1 and value
of ipvl_nf_hook_refcnt is set to 1.
When veth3 migrates from ns1 to ns2 as figure (2), veth3 will register in
ns2 and calls call_netdevice_notifiers with NETDEV_REGISTER event:
dev_change_net_namespace
call_netdevice_notifiers
ipvlan_device_event
ipvlan_migrate_l3s_hook
ipvlan_register_nf_hook(newnet) (I)
ipvlan_unregister_nf_hook(oldnet) (II)
In function ipvlan_migrate_l3s_hook(), ipvl_nf_hook_refcnt in ns1 is not 0
since veth1 with ipvlan1 still in ns1, (I) and (II) will be called to
register nf_hook in ns2 and unregister nf_hook in ns1. As a result,
ipvl_nf_hook_refcnt in ns1 is decreased incorrectly and this in ns2
is increased incorrectly. When the second net namespace is removed, a
reference count leak warning in ipvlan_ns_exit() will be triggered.
This patch add a check before ipvlan_migrate_l3s_hook() is called. The
warning can be triggered as follows:
$ ip netns add ns1
$ ip netns add ns2
$ ip netns exec ns1 ip link add veth1 type veth peer name veth2
$ ip netns exec ns1 ip link add veth3 type veth peer name veth4
$ ip netns exec ns1 ip link add ipv1 link veth1 type ipvlan mode l3s
$ ip netns exec ns1 ip link add ipv2 link veth3 type ipvlan mode l2
$ ip netns exec ns1 ip link set veth3 netns ns2
$ ip net del ns2
Fixes: 3133822f5ac1 ("ipvlan: use pernet operations and restrict l3s hooks to master netns") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230817145449.141827-1-luwei32@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The blamed commit resolved a bug where frames would still get stuck at
egress, even though they're smaller than the maxSDU[tc], because the
driver did not take into account the extra 33 ns that the queue system
needs for scheduling the frame.
It now takes that into account, but the arithmetic that we perform in
vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on
64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS
may become a very large integer if gate_len_ns < 33 ns.
In practice, this means that we've introduced a regression where all
traffic class gates which are permanently closed will not get detected
by the driver, and we won't enable oversize frame dropping for them.
Before:
mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
After:
mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000
mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames
mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS
mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS
Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230817120111.3522827-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Cited fixes commit introduced linecard notifications for register,
however it didn't add them for unregister. Fix that by adding them.
Fixes: c246f9b5fd61 ("devlink: add support to create line card and expose to user") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230817125240.2144794-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
On SDP interfaces, frame oversize and undersize errors are
observed as driver is not considering packet sizes of all
subscribers of the link before updating the link config.
This patch fixes the same.
Fixes: 9b7dd87ac071 ("octeontx2-af: Support to modify min/max allowed packet lengths") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230817063006.10366-1-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
__tracing_open() { // 1. File 'trace' is being opened;
...
*iter->trace = *tr->current_trace; // 2. Tracer 'function_graph' is
// currently set;
...
iter->trace->open(iter); // 3. Call graph_trace_open() here,
// and memory are allocated in it;
...
}
s_start() { // 4. The opened file is being read;
...
*iter->trace = *tr->current_trace; // 5. If tracer is switched to
// 'nop' or others, then memory
// in step 3 are leaked!!!
...
}
To fix it, in s_start(), close tracer before switching then reopen the
new tracer after switching. And some tracers like 'wakeup' may not update
'iter->private' in some cases when reopen, then it should be cleared
to avoid being mistakenly closed again.
The current code uses a lot of casts to access the fields member in struct
synth_trace_events with different sizes. This makes the code hard to
read, and had already introduced an endianness bug. Use a union and struct
instead.
Link: https://lkml.kernel.org/r/20230816154928.4171614-2-svens@linux.ibm.com Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Fixes: 00cf3d672a9dd ("tracing: Allow synthetic events to pass around stacktraces") Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Stable-dep-of: 887f92e09ef3 ("tracing/synthetic: Skip first entry for stack traces") Signed-off-by: Sasha Levin <sashal@kernel.org>
The root cause is that:
1. After `echo 0 > tracing_cpumask`, 'record_disabled' of cpu buffers
in 'tr->array_buffer.buffer' became 1 (see tracing_set_cpumask());
2. After `echo 1 > snapshot`, 'tr->array_buffer.buffer' is swapped
with 'tr->max_buffer.buffer', then the 'record_disabled' became 0
(see update_max_tr());
3. After `echo fff > tracing_cpumask`, the 'record_disabled' become -1;
Then array_buffer and max_buffer are both unavailable due to value of
'record_disabled' is not 0.
To fix it, enable or disable both array_buffer and max_buffer at the same
time in tracing_set_cpumask().
Link: https://lkml.kernel.org/r/20230805033816.3284594-2-zhengyejian1@huawei.com Cc: <mhiramat@kernel.org> Cc: <vnagarnaik@google.com> Cc: <shuah@kernel.org> Fixes: 71babb2705e2 ("tracing: change CPU ring buffer state from tracing_cpumask") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When the code to use the PTP HW clock was added, it didn't update
the Kconfig entry for the PTP dependency, leading to build errors,
so update the Kconfig entry to depend on PTP_1588_CLOCK_OPTIONAL.
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_init':
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294: undefined reference to `ptp_clock_register'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:294:(.text+0xce8): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_register'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301: undefined reference to `ptp_clock_index'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:301:(.text+0xd18): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.o: in function `iwl_mvm_ptp_remove':
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315: undefined reference to `ptp_clock_index'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:315:(.text+0xe80): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_index'
aarch64-linux-ld: drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319: undefined reference to `ptp_clock_unregister'
drivers/net/wireless/intel/iwlwifi/mvm/ptp.c:319:(.text+0xeac): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ptp_clock_unregister'
Fixes: 1595ecce1cf3 ("wifi: iwlwifi: mvm: add support for PTP HW clock (PHC)") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202308110447.4QSJHmFH-lkp@intel.com/ Cc: Krishnanand Prabhu <krishnanand.prabhu@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Gregory Greenman <gregory.greenman@intel.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: netdev@vger.kernel.org Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230812052947.22913-1-rdunlap@infradead.org Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
It's a bug in the concurrent scenario of unregister_netdevice_many()
and raw_release() as following:
cpu0 cpu1
unregister_netdevice_many(can_dev)
unlist_netdevice(can_dev) // dev_get_by_index() return NULL after this
net_set_todo(can_dev)
raw_release(can_socket)
dev = dev_get_by_index(, ro->ifindex); // dev == NULL
if (dev) { // receivers in dev_rcv_lists not free because dev is NULL
raw_disable_allfilters(, dev, );
dev_put(dev);
}
...
ro->bound = 0;
...
call_netdevice_notifiers(NETDEV_UNREGISTER, )
raw_notify(, NETDEV_UNREGISTER, )
if (ro->bound) // invalid because ro->bound has been set 0
raw_disable_allfilters(, dev, ); // receivers in dev_rcv_lists will never be freed
Add a net_device pointer member in struct raw_sock to record bound
can_dev, and use rtnl_lock to serialize raw_socket members between
raw_bind(), raw_release(), raw_setsockopt() and raw_notify(). Use
ro->dev to decide whether to free receivers in dev_rcv_lists.
Fixes: 8d0caedb7596 ("can: bcm/raw/isotp: use per module netdevice notifier") Reviewed-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/all/20230711011737.1969582-1-william.xuanziyang@huawei.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
Before removing checkpoint buffer from the t_checkpoint_list, we have to
check both BH_Dirty and BH_Lock bits together to distinguish buffers
have not been or were being written back. But __cp_buffer_busy() checks
them separately, it first check lock state and then check dirty, the
window between these two checks could be raced by writing back
procedure, which locks buffer and clears buffer dirty before I/O
completes. So it cannot guarantee checkpointing buffers been written
back to disk if some error happens later. Finally, it may clean
checkpoint transactions and lead to inconsistent filesystem.
jbd2_journal_forget() and __journal_try_to_free_buffer() also have the
same problem (journal_unmap_buffer() escape from this issue since it's
running under the buffer lock), so fix them through introducing a new
helper to try holding the buffer lock and remove really clean buffer.
journal_clean_one_cp_list() and journal_shrink_one_cp_list() are almost
the same, so merge them into journal_shrink_one_cp_list(), remove the
nr_to_scan parameter, always scan and try to free the whole checkpoint
list.
wait till linux guest boots, then hotplug device:
(qemu) device_add qxl,bus=rp1
hotplug on guest side fails with:
pci 0000:01:00.0: [1b36:0100] type 00 class 0x038000
pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x03ffffff]
pci 0000:01:00.0: reg 0x14: [mem 0x00000000-0x03ffffff]
pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00001fff]
pci 0000:01:00.0: reg 0x1c: [io 0x0000-0x001f]
pci 0000:01:00.0: BAR 0: no space for [mem size 0x04000000]
pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x04000000]
pci 0000:01:00.0: BAR 1: no space for [mem size 0x04000000]
pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x04000000]
pci 0000:01:00.0: BAR 2: assigned [mem 0xfe800000-0xfe801fff]
pci 0000:01:00.0: BAR 3: assigned [io 0x1000-0x101f]
qxl 0000:01:00.0: enabling device (0000 -> 0003)
Unable to create vram_mapping
qxl: probe of 0000:01:00.0 failed with error -12
However when using native PCIe hotplug
'-global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off'
it works fine, since kernel attempts to reassign unused resources.
Use the same machinery as native PCIe hotplug to (re)assign resources.
Link: https://lore.kernel.org/r/20230424191557.2464760-1-imammedo@redhat.com Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
On server-initiated disconnect, rpcrdma_xprt_disconnect() was DMA-
unmapping the Receive buffers, but rpcrdma_post_recvs() neglected
to remap them after a new connection had been established. The
result was immediate failure of the new connection with the Receives
flushing with LOCAL_PROT_ERR.
Fixes: 671c450b6fe0 ("xprtrdma: Fix oops in Receive handler after device removal") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Another highly rare error case when a page allocating loop (inside
__nfs4_get_acl_uncached, this time) is not properly unwound on error.
Since pages array is allocated being uninitialized, need to free only
lower array indices. NULL checks were useful before commit 62a1573fcf84
("NFSv4 fix acl retrieval over krb5i/krb5p mounts") when the array had
been initialized to zero on stack.
Found by Linux Verification Center (linuxtesting.org).
There is a slight issue with error handling code inside
nfs42_proc_getxattr(). If page allocating loop fails then we free the
failing page array element which is NULL but __free_page() can't deal with
NULL args.
Found by Linux Verification Center (linuxtesting.org).
In the real workload, I encountered an issue which could cause the RTO
timer to retransmit the skb per 1ms with linear option enabled. The amount
of lost-retransmitted skbs can go up to 1000+ instantly.
The root cause is that if the icsk_rto happens to be zero in the 6th round
(which is the TCP_THIN_LINEAR_RETRIES value), then it will always be zero
due to the changed calculation method in tcp_retransmit_timer() as follows:
Above line could be converted to
icsk->icsk_rto = min(0 << 1, TCP_RTO_MAX) = 0
Therefore, the timer expires so quickly without any doubt.
I read through the RFC 6298 and found that the RTO value can be rounded
up to a certain value, in Linux, say TCP_RTO_MIN as default, which is
regarded as the lower bound in this patch as suggested by Eric.
Fixes: 36e31b0af587 ("net: TCP thin linear timeouts") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jason Xing <kernelxing@tencent.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
af_unix: Fix null-ptr-deref in unix_stream_sendpage().
Bing-Jhong Billy Jheng reported null-ptr-deref in unix_stream_sendpage()
with detailed analysis and a nice repro.
unix_stream_sendpage() tries to add data to the last skb in the peer's
recv queue without locking the queue.
If the peer's FD is passed to another socket and the socket's FD is
passed to the peer, there is a loop between them. If we close both
sockets without receiving FD, the sockets will be cleaned up by garbage
collection.
The garbage collection iterates such sockets and unlinks skb with
FD from the socket's receive queue under the queue's lock.
So, there is a race where unix_stream_sendpage() could access an skb
locklessly that is being released by garbage collection, resulting in
use-after-free.
To avoid the issue, unix_stream_sendpage() must lock the peer's recv
queue.
Note the issue does not exist in 6.5+ thanks to the recent sendpage()
refactoring.
This patch is originally written by Linus Torvalds.
The tests were made with a specific workload, further tests on a
recently updated fedora 38 system with a system wide perf.data file
shows 'perf report' taking excessive time resolving inlines in vmlinux,
so lets revert this until a full investigation and improvement on the
addr2line support code is made.
Reported-by: Jesper Dangaard Brouer <hawk@kernel.org> Acked-by: Artem Savkov <asavkov@redhat.com> Tested-by: Jesper Dangaard Brouer <hawk@kernel.org> Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/ZMl8VyhdwhClTM5g@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This can clean up all irq warnings because of unbalanced
amdgpu_irq_get/put when unplugging/unbinding device, and leave
irq count decrease in each ip fini function.
Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vangogh driver just gained a link time dependency that now causes
randconfig builds to fail:
x86_64-linux-ld: sound/soc/amd/vangogh/pci-acp5x.o: in function `snd_acp5x_probe':
pci-acp5x.c:(.text+0xbb): undefined reference to `snd_amd_acp_find_config'
Fixes: e89f45edb747e ("ASoC: amd: vangogh: Add check for acp config flags in vangogh platform") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230602124447.863476-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GFX v11.0.1 reported fence fallback timer expired issue on
SDMA and GFX rings after S0ix resume. This is generated by
EOP interrupts are disabled when S0ix suspend but fails to
re-enable when resume because of the GFX is in GFXOFF.
[ 203.349571] [drm] Fence fallback timer expired on ring sdma0
[ 203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0
[ 203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0
For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers
to configure the fence driver interrupts for rings that belong to GFX.
The interrupts configuration will be restored by GFXOFF exit.
Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DCN 3.1.4 is reported to hang on s2idle entry if graphics activity
is happening during entry. This is because GFXOFF was scheduled as
delayed but RLC gets disabled in s2idle entry sequence which will
hang GFX IP if not already in GFXOFF.
To help this problem, flush any delayed work for GFXOFF early in
s2idle entry sequence to ensure that it's off when RLC is changed.
commit 4b31b92b143f ("drm/amdgpu: complete gfxoff allow signal during
suspend without delay") modified power gating flow so that if called
in s0ix that it ensured that GFXOFF wasn't put in work queue but
instead processed immediately.
This is dead code due to commit 10cb67eb8a1b ("drm/amdgpu: skip
CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly
called as part of the suspend entry code. Remove that dead code.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3f9ffce5765d ("drm/i915: Do panel VBT init early if the VBT
declares an explicit panel type") started using -1 as the value for
unset panel_type. It gets initialized in intel_panel_init_alloc(), but
the SDVO code never calls it.
Call intel_panel_init_alloc() to initialize the panel, including the
panel_type.
Reported-by: Tomi Leppänen <tomi@tomin.site> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8896 Fixes: 3f9ffce5765d ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.1+ Reviewed-by: Uma Shankar <uma.shankar@intel.com> Tested-by: Tomi Leppänen <tomi@tomin.site> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230803122706.838721-1-jani.nikula@intel.com
(cherry picked from commit 26e60294e8eacedc8ebb33405b2c375fd80e0900) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It appears MPC_SPLIT_DYNAMIC still causes problems with multiple
displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP.
This increases power usage with multiple displays, but avoids hangs.
Commit ca62297b2085 ("drm/edid: Fix csync detailed mode parsing") fixed
EDID detailed mode sync parsing. Unfortunately, there are quite a few
displays out there that have bogus (zero) sync field that are broken by
the change. Zero means analog composite sync, which is not right for
digital displays, and the modes get rejected. Regardless, it used to
work, and it needs to continue to work. Revert the change.
Rejecting modes with analog composite sync was the part that fixed the
gitlab issue 8146 [1]. We'll need to get back to the drawing board with
that.
qxl_mode_dumb_create() dereferences the qobj returned by
qxl_gem_object_create_with_handle(), but the handle is the only one
holding a reference to it.
A potential attacker could guess the returned handle value and closes it
between the return of qxl_gem_object_create_with_handle() and the qobj
usage, triggering a use-after-free scenario.
Reproducer:
int dri_fd =-1;
struct drm_mode_create_dumb arg = {0};
==================================================================
BUG: KASAN: slab-use-after-free in qxl_mode_dumb_create+0x3c2/0x400 linux/drivers/gpu/drm/qxl/qxl_dumb.c:69
Write of size 1 at addr ffff88801136c240 by task poc/515
The buggy address belongs to the object at ffff88801136c000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 576 bytes inside of
freed 1024-byte region [ffff88801136c000, ffff88801136c400)
Instead of returning a weak reference to the qxl_bo object, return the
created drm_gem_object and let the caller decrement the reference count
when it no longer needs it. As a convenience, if the caller is not
interested in the gobj object, it can pass NULL to the parameter and the
reference counting is descremented internally.
The bug and the reproducer were originally found by the Zero Day Initiative project (ZDI-CAN-20940).
When mmc allocation succeeds, the error paths are not freeing mmc.
Fix the above issue by changing mmc_alloc_host() to devm_mmc_alloc_host()
to simplify the error handling. Remove label 'probe_free_host' as devm_*
api takes care of freeing, also remove mmc_free_host() from remove
function as devm_* takes care of freeing.
mmc_add_host() may return error, if we ignore its return value,
1. the memory allocated in mmc_alloc_host() will be leaked
2. null-ptr-deref will happen when calling mmc_remove_host()
in remove function spmmc_drv_remove() because deleting not
added device.
Fix this by checking the return value of mmc_add_host(). Moreover,
I fixed the error handling path of spmmc_drv_probe() to clean up.
For a completed request, after the mmc_blk_mq_complete_rq(mq, req)
function is executed, the bitmap_tags corresponding to the
request will be cleared, that is, the request will be regarded as
idle. If the request is acquired by a different type of process at
this time, the issue_type of the request may change. It further
caused the value of mq->in_flight[issue_type] to be abnormal,
and a large number of requests could not be sent.
When commit 716c330433e3 ("media: uvcvideo: Use standard names for
menus") reworked the handling of menu controls, it inadvertently
replaced a GENMASK(n - 1, 0) with a BIT_MASK(n). The latter isn't
equivalent to the former, which broke adding XU mappings from userspace.
Fix it.
blk_crypto_profile_init() calls lockdep_register_key(), which warns and
does not register if the provided memory is a static object.
blk-crypto-fallback currently has a static blk_crypto_profile and calls
blk_crypto_profile_init() thereupon, resulting in the warning and
failure to register.
Fortunately it is simple enough to use a dynamically allocated profile
and make lockdep function correctly.
Fixes: 2fb48d88e77f ("blk-crypto: use dynamic lock class for blk_crypto_profile::lock") Cc: stable@vger.kernel.org Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me> Reviewed-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20230817141615.15387-1-sweettea-kernel@dorminy.me Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the value of ZT is set via ptrace we don't disable traps for SME.
This means that when a the task has never used SME before then the value
set via ptrace will never be seen by the target task since it will
trigger a SME access trap which will flush the register state.
Disable SME traps when setting ZT, this means we also need to allocate
storage for SVE if it is not already allocated, for the benefit of
streaming SVE.
When we use NT_ARM_SSVE to either enable streaming mode or change the
vector length for a process we do not currently do anything to ensure that
there is storage allocated for the SME specific register state. If the
task had not previously used SME or we changed the vector length then
the task will not have had TIF_SME set or backing storage for ZA/ZT
allocated, resulting in inconsistent register sizes when saving state
and spurious traps which flush the newly set register state.
We should set TIF_SME to disable traps and ensure that storage is
allocated for ZA and ZT if it is not already allocated. This requires
modifying sme_alloc() to make the flush of any existing register state
optional so we don't disturb existing state for ZA and ZT.
Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Reported-by: David Spickett <David.Spickett@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org> # 5.19.x Link: https://lore.kernel.org/r/20230810-arm64-fix-ptrace-race-v1-1-a5361fad2bd6@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes an issue affecting the Wifi/Bluetooth connectivity on
ROCK Pi 4 boards. Commit f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth
on ROCK Pi 4 boards") introduced a problem with the clock configuration.
Specifically, the clock-names property of the sdio-pwrseq node was not
updated to 'lpo', causing the driver to wait indefinitely for the wrong clock
signal 'ext_clock' instead of the expected one 'lpo'. This prevented the proper
initialization of Wifi/Bluetooth chip on ROCK Pi 4 boards.
To address this, this patch updates the clock-names property of the
sdio-pwrseq node to "lpo" to align with the changes made to the bluetooth node.
This patch has been tested on ROCK Pi 4B.
Fixes: f471b1b2db08 ("arm64: dts: rockchip: Fix Bluetooth on ROCK Pi 4 boards") Cc: stable@vger.kernel.org Signed-off-by: Yogesh Hegde <yogi.kernel@gmail.com> Link: https://lore.kernel.org/r/ZLbATQRjOl09aLAp@zephyrusG14 Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel uses `struct virtio_net_ctrl_rss` to save command-specific-data
for both the VIRTIO_NET_CTRL_MQ_HASH_CONFIG and
VIRTIO_NET_CTRL_MQ_RSS_CONFIG commands.
According to the VirtIO standard, "Field reserved MUST contain zeroes.
It is defined to make the structure to match the layout of
virtio_net_rss_config structure, defined in 5.1.6.5.7.".
Yet for the VIRTIO_NET_CTRL_MQ_HASH_CONFIG command case, the `max_tx_vq`
field in struct virtio_net_ctrl_rss, which corresponds to the
`reserved` field in struct virtio_net_hash_config, is not zeroed,
thereby violating the VirtIO standard.
This patch solves this problem by zeroing this field in
virtnet_init_default_rss().
Cc: Andrew Melnychenko <andrew@daynix.com> Cc: stable@vger.kernel.org Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.") Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20230810110405.25558-1-yin31149@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Two versions of the original patch were sent but V1 was merged instead
of V2 due to a mistake.
So update to V2.
The advantage of V2 is that it completely avoids dereferencing the pointer,
even just to take the address, which may fix problems with some compilers.
Both versions work on my gcc 9.4 but use the safer one.
Fixes: 98e2dd5f7a8b ("regulator: da9063: fix null pointer deref with partial DT config") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Tested-by: Benjamin Bara <benjamin.bara@skidata.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230804083514.1887124-1-martin.fuzzey@flowbird.group Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / thirdparty / kernel / stable.git / log
